Hi,
I'm trying to let the Logitech Quickcam Pro for Notebooks (046d:0991) work
on the FreeRunner.
The webcam works well on a PC (Fedora 4 2.6.17), using uvcvideo and
luvcview.
But what shoud I do to cross-compile the driver and the application?
Could anyone tell me particularly? Thanks.
Hello,
The next think I want to try is using GPS on my FR with Om2008.9.
I've never used GPS before and so I'm a bit lost in how to do with FR
:-)
The desktop has an icon 'Locations' and by launching it it asks me if I
want to switch-o GPS, I press 'yes' and then nothing more happens, there
is
In open sky conditions in Jaipur, India (outdoors) the Freerunner normally
gives me a 40s (+ - 10s) tiff while my N 95 takes 60s (+ - 10) [ cold starts
after rebooting on both ]. I have not timed them indoors but will do so and
report after Diwali
Rakshat
--
--
Please use Firefox
Hmm i found that too Yaroslav. Would definitely be handy. Also the keyboard
is almost incompatible. When you type in a name and select it, the keyboard
puts in a space character which yields no results until you backspace. Is
there a way to get the keyboard to lose predictive text so it can sort
What simple ananlysis could be started in a terminal to gather data
about what is eating what during usage? These results should indicate
why FDOM is s slow and what should be done to speed it up.
Leonti Bielski wrote:
I think something is lowing down FDOM, maybe this is gestures daemon
I see that some great software has been done in Germany. Would it be
possible to add these to opkg.org to get bigger audience and user
base?
r
--
| risto h. kurppa
| risto at kurppa dot fi
| http://risto.kurppa.fi
___
Openmoko community mailing list
Hi there,
is there any progress on the porting of Android to the FR yet? Are
updates posted to this list, since it seems pretty quite around the
port?
Cheers
/peter
http://www.oredev.se - Be there or be gone.
GTalk:neubauer.peter
Skypepeter.neubauer
ICQ18762544
Sign up to Koolu's forum [1] and see what's going on there. Cfriedt also has
a spreadsheet of progress that seems to have been updated frequently [2].
Last time I check there were a few to go but now, not so much. See also [3].
Nick
1. http://forum.koolu.org/
2.
I've read http://wiki.openmoko.org/wiki/Opkg seems ok enough, but id like
to make them aviable to everyone, how?
Hi,
You can publish theom on
http://www.opkg.org/
Greets
Michael
___
Openmoko community mailing list
community@lists.openmoko.org
On Tue, Oct 28, 2008 at 9:06 AM, Pander [EMAIL PROTECTED] wrote:
What simple ananlysis could be started in a terminal to gather data
about what is eating what during usage? These results should indicate
why FDOM is s slow and what should be done to speed it up.
top?
r
--
| risto h.
I haven't missed any calls yet.
However, when i suspend manually (pressing the power button)
and want to wake the phone up manually, it turns on for half a second and
than off again. I always need to press the power button again.
(Also, it doesn't seem to make much difference)
qtextended an one
agps-onlinec -c full -u [EMAIL PROTECTED] -k Fvhcv -la 35.22 -lo -79.46 -al
250 -p 100.00
[...]
provided the location data prefed to agps-onlinec and the current time
(system clock) are accurate enough. (clock doesn't need to be
second-precise, but if it's off several hours or more then
The next think I want to try is using GPS on my FR with Om2008.9.
I've never used GPS before and so I'm a bit lost in how to do with FR
:-)
The desktop has an icon 'Locations' and by launching it it asks me if I
want to switch-o GPS, I press 'yes' and then nothing more happens, there
is only
El día Tuesday, October 28, 2008 a las 04:37:24AM -0400, Stefan Monnier
escribió:
The next think I want to try is using GPS on my FR with Om2008.9.
I've never used GPS before and so I'm a bit lost in how to do with FR
:-)
The desktop has an icon 'Locations' and by launching it it asks me
hi,
I'm using Freerunner and debug board v3, and trying to use serial console, and
Ubuntu 8.04 on my PC.
I have connected the FR and the debug board with the flexible cable. The
/dev/ttyUSB0 and /dev/ttyUSB1 doesn't show up, but only /dev/ttyACM0, when I
connected both USB of freerunner and
El mar, 28-10-2008 a las 16:50 +1000, nick d. escribió:
Hmm i found that too Yaroslav. Would definitely be handy. Also the
keyboard is almost incompatible. When you type in a name and select
it, the keyboard puts in a space character which yields no results
until you backspace. Is there a way
On Tuesday 28 Oct 2008 1:43:09 pm Richy wrote:
qtextended an one mwester-kernel had standby-time of several days, if you
never turn on wifi
My experience matches this and it gives me hope that it is indeed possible to
make the FR battery last longer. Typically, with about 10-15 mins of talking
Hi,
On Fri, 24 Oct 2008 14:47:03 +0800
John Lee [EMAIL PROTECTED] wrote:
Now for the status update this week:
Tick merged the qtopia echo patch (#1267), it works, no echo but the
audio sounds a little bit less 'vivid' (not sure if this is the right
word). He is now working on the touch
Alastair Johnson wrote:
The FSO API is capable of a good deal more than is exposed by GUI in the
releases so far. This utility is an attempt to do something useful while
finding out about python, gtk, dbus and fso. It's not pretty, or an
example of good coding practise!
* GPRS networking
okay let's give it a try. merged into om svn and will be used as the
default gsmhandset.state in the next build.
the qtopia echo patch along with this state file still leaves a little
echo and buzzing, but doesn't really effect the talking.
Regards,
John
On Mon, Oct 27, 2008 at 01:16:42PM
Hi,
We will still do a 2008.11 release so it will be in stable soon. If
you don't to wait, you can switch to testing repo.
Regards,
John
On Tue, Oct 28, 2008 at 11:06:34AM +0100, umaxx wrote:
Hi,
On Fri, 24 Oct 2008 14:47:03 +0800
John Lee [EMAIL PROTECTED] wrote:
Now for the status
Am Monday 27 October 2008 13:28:17 schrieb arne anka:
http://git.freesmartphone.org/?p=specs.git;a=blob_plain;f=html/index.html
;hb=HEAD
that one i was looking for -- none of the specific pages google lists has
a reference to this toc.
It's not an easy human-readable URL, but it is linked
Ive been trying testing out and after 3 days, Ive finally gotten a pin
dialog and was able to register. However, what files do I need to
install to get audio. On one flash I installed everything alsa and was
able to stream audio via mplayer, but still none in the dialler. I am
after a minimal
El día Tuesday, October 28, 2008 a las 06:09:24PM +0800, John Lee escribió:
okay let's give it a try. merged into om svn and will be used as the
default gsmhandset.state in the next build.
the qtopia echo patch along with this state file still leaves a little
echo and buzzing, but doesn't
Am Monday 27 October 2008 14:10:53 schrieb Alastair Johnson:
arne anka wrote:
http://git.freesmartphone.org/?p=specs.git;a=blob_plain;f=html/index.htm
l;hb=HEAD
that one i was looking for -- none of the specific pages google lists has
a reference to this toc.
It's not an easy
If you think that's buried... help us, it's a wiki!
not as long as it requires to create an account -- i got far to much of
those and do not intend to add to the list just to make some comments or
corrections in a wiki.
___
Openmoko community
I mean short interval and non disturbing logging top while doing normal
phone functions. Looking at top in a terminal and testing phone functions
do not go together easily. Any ideas?
On Tue, October 28, 2008 09:09, Risto H. Kurppa wrote:
On Tue, Oct 28, 2008 at 9:06 AM, Pander [EMAIL PROTECTED]
On Tue, Oct 28, 2008 at 12:53 PM, KaZeR [EMAIL PROTECTED] wrote:
Joerg Lippmann a écrit :
Am Mittwoch 22 Oktober 2008 schrieb Lorn Potter:
Jim Morris wrote:
Lorn Potter wrote:
Jim Morris wrote:
Cédric Berger wrote:
Just because 4.4.1 might be unstable doesn't mean qt
Are you extracting the data out of the
struct with the operators
Thank you again for that hint:
For interested the way I implemented it:
Greets Michael
struct GPSSatellite{
int ID;
bool InUse;
unsigned int Elevation;
unsigned
On Tuesday 28 October 2008 06:11:54 Yaroslav Halchenko wrote:
also it seems to be not 'patched' in the view of contacts whenever it is
called from the dialer (person icon) -- and that is the most often
place where I look for contacts... now I will need to start contacts
first I guess, heh heh
On Tue, 28 Oct 2008 17:01:40 +0800
Lin Mac [EMAIL PROTECTED] wrote:
you need to connect to DB using openocd ;)
hi,
I'm using Freerunner and debug board v3, and trying to use serial
console, and Ubuntu 8.04 on my PC.
I have connected the FR and the debug board with the flexible cable.
Sometimes when I connect my Freerunner to my Fedora 9 laptop I get
messages in dmesg like these:
hub 1-0:1.0: unable to enumerate USB device on port 3
usb 4-1: new full speed USB device using uhci_hcd and address 23
usb 4-1: new full speed USB device using uhci_hcd and address 24
usb 4-1: new low
Workaround : suspend and resume
Xavier.
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
El día Tuesday, October 28, 2008 a las 06:26:24AM -0400, Stefan Monnier
escribió:
does this mean as well that I will get some map on my screen? is there some
interfacing for exmaple with this:
http://www.openstreetmap.org/?lat=23.11725lon=-82.42706zoom=15layers=B000FTF
Yes, you'll get an
hi,
I just ignore the driver section and consider it is only required by flash
eeprom part.
Thanks a lot!
Best Regards,
Mac Lin
Date: Tue, 28 Oct 2008 15:14:32 +0330
From: [EMAIL PROTECTED]
To: community@lists.openmoko.org
CC: [EMAIL PROTECTED]
Subject: Re: debug board seems not
William Kenworthy wrote:
Ive been trying testing out and after 3 days, Ive finally gotten a pin
dialog and was able to register. However, what files do I need to
install to get audio. On one flash I installed everything alsa and was
able to stream audio via mplayer, but still none in the
Hi all,
I am currently setting up a debian system on my FreeRunner, but I have
some questions. :)
1) I'm writing some python programs to interact with the FSO framework.
I have seen there's now support for a rules file, which seems quite a
nice idea.
Now, I would like to be able to modify these
Michael 'Mickey' Lauer wrote:
Am Monday 27 October 2008 14:10:53 schrieb Alastair Johnson:
arne anka wrote:
http://git.freesmartphone.org/?p=specs.git;a=blob_plain;f=html/index.htm
l;hb=HEAD
that one i was looking for -- none of the specific pages google lists has
a reference to this toc.
2008/10/28 Michael Tansella [EMAIL PROTECTED]
Are you extracting the data out of the
struct with the operators
Thank you again for that hint:
For interested the way I implemented it:
Here my snippet to read Phonebooks from sim:
struct PhonebookEntry
{
int index;
QString name;
Oh. So that's why qtopia always loses that data. I thought it was related to
reflashing and wondered why, because it has it's db on the sd card... *g*
Marcel
Am Tuesday 28 October 2008 00:53:59 schrieb W.Kenworthy:
because when the phone suspends you lose calls/sms messages ...
BillK
On
Maybe this answer from Andy Green helps you a bit because this question
already comes up some time ago. You only had to search this mailing list
for his response.
http://lists.openmoko.org/nabble.html#nabble-td532868
thanks for the link -- i tried to tell him that a while ago, but to no
Maybe this answer from Andy Green helps you a bit because this question
already comes up some time ago. You only had to search this mailing list
for his response.
http://lists.openmoko.org/nabble.html#nabble-td532868
Morten Olsen Lysgaard wrote:
Same here, but no sympthoms. Anyone know exactly
On Tue, 28 Oct 2008, Holger Freyther wrote:
or may be Holger would add 1 more patch in the right spot? ;-)
If you change the mentioned key Contacts and the Contact Selection Dialog
will
show the search bar. The Contact Selection didn't work because Trolltech copy
and pasted the 80% of
Use top on a ssh sesion on a externa pc conected trough usb
El mar, 28-10-2008 a las 11:56 +0100, Pander escribió:
I mean short interval and non disturbing logging top while doing normal
phone functions. Looking at top in a terminal and testing phone functions
do not go together easily. Any
On Tuesday 28 October 2008 16:00:28 Yaroslav Halchenko wrote:
So I guess additional piece in Contacts code wasn't patched or I am not
running desired version of qpe (using last FDOM without additional
upgrades)
No idea what FDOM is using as versions..
Hi,
I was about to solder myself an adaptor to use my headphones with the
FreeRunner as an ogg/flac player. I have found some jacks, which seem to good
for this task (german website):
http://www.reichelt.de/?;ACTION=3;LA=2;GROUP=C161;GROUPID=3237;ARTICLE=47784
Of course! Feel free to add all the software you have. Just register for
an account at www.opkg.org.
If you need help or you have any questions, drop me a line!
Regards,
Tobias
Am 28.10.2008 08:18, Risto H. Kurppa schrieb:
I see that some great software has been done in Germany. Would it be
On Tue, 28 Oct 2008 14:19:04 +0100, Matthias Apitz [EMAIL PROTECTED]
wrote:
I have now installed and configured:
# opkg install gpsd
# opkg install
http://www.tangogps.org/downloads/tangogps_0.9.3-r1_armv4t.ipk
# vi /etc/default/gpsd
GPS_DEV=/dev/ttySAC1
#
Hi,
since its possible I want to use my Freerunner with an USB mouse :-)
I got it working flawlessly by plugging the mouse in while the phone is
in host mode and removing the -hide-cursor argument from the ARGS
variable in /etc/X11/Xserver.
Unfortunately you have to restart your Xserver each time
Bastiaan Hovestreydt wrote:
Hi,
since its possible I want to use my Freerunner with an USB mouse :-)
I got it working flawlessly by plugging the mouse in while the phone is
in host mode and removing the -hide-cursor argument from the ARGS
variable in /etc/X11/Xserver.
Unfortunately you
Hello,
Here's something I'm working on, fso-control.
http://mysite.verizon.net/~digver/apps/fso-control.tar.gz
Uses python and edje to control the state (suspend, reboot, shutdown)
with frameworkd. It's not unlike what I remember 2007.* and 2008.*
having when the POWER button is pressed.
Thanks for the fast reply,
will keep an eye on that!
/peter
http://www.oredev.se - Be there or be gone.
GTalk:neubauer.peter
Skypepeter.neubauer
ICQ18762544
Phone +46704 106975
LinkedIn http://www.linkedin.com/in/neubauer
Twitter
Hi,
http://www.reichelt.de/?;ACTION=3;LA=2;GROUP=C161;GROUPID=3237;ARTICLE=47784
I can't recommend this connector. It works, but not very well. I have to
pull out
the connector aprox. 1 mm to get stereo output. And this position is not
very
stable.
I was about to solder myself an adaptor to use my headphones with the
FreeRunner as an ogg/flac player. I have found some jacks, which seem to
good for this task (german website):
http://www.reichelt.de/?;ACTION=3;LA=2;GROUP=C161;GROUPID=3237;ARTICLE=4778
4
Peter Neubauer wrote:
Thanks for the fast reply,
will keep an eye on that!
Some more links:
Ben Leslie's blog:
http://benno.id.au/blog/
Google's android-porting mailing list:
http://groups.google.com/group/android-porting
Jim
___
Openmoko
There's a notice on the wiki about a working adaptor I also own - didn't
notice significant quality decrease with it and it works well. Just to
possibly save you from soldering (although I know its fun). :)
-Marcel
Am Tuesday 28 October 2008 21:34:47 schrieb Thomas Köckerbauer:
I was about
On 28.10.2008 at 21:57:09, Marcel wrote:
There's a notice on the wiki about a working adaptor I also own - didn't
notice significant quality decrease with it and it works well. Just to
possibly save you from soldering (although I know its fun). :)
As far as I know this adaptor is mono-only,
ahh, should have realised that. 2008.testing Ive gone back to 2008.9
now as testing has so many bugs in illume that its not usable - will try
again in a few days so it would still be nice to know whats needed to
turn these minimal images into something usable.
BillK
On Tue, 2008-10-28 at 13:34
On Tue, 28 Oct 2008 19:57:27 +0100 Bastiaan Hovestreydt
[EMAIL PROTECTED] babbled:
Hi,
since its possible I want to use my Freerunner with an USB mouse :-)
I got it working flawlessly by plugging the mouse in while the phone is
in host mode and removing the -hide-cursor argument from the
Is there a plan to access also the accelerometers through dbus? it seems to
me that reading continuously from them without appropriate timing could be
heavy for the battery. more, having to do the decoding part from each
application who uses the sensor is complicated and error prone, while having
On Tue, 2008-10-28 at 14:51 +0100, Benedikt Bär wrote:
Hi all,
I am currently setting up a debian system on my FreeRunner, but I have
some questions. :)
1) I'm writing some python programs to interact with the FSO framework.
I have seen there's now support for a rules file, which seems
On Wed, 2008-10-29 at 10:29 +0800, Guillaume Chereau wrote:
On Tue, 2008-10-28 at 14:51 +0100, Benedikt Bär wrote:
Hi all,
I am currently setting up a debian system on my FreeRunner, but I have
some questions. :)
1) I'm writing some python programs to interact with the FSO
62 matches
Mail list logo
