Don't know if this is expected behaviour, but when I moved rw part
before all other kernel parameters:
r...@om-gta02:~# cat /boot/append-GTA02
rw console=tty0 loglevel=8 rootdelay=1
now Neo boots fine with Qi and finally shows Illume desktop and everything.
2009/1/4 Evgeny Karyakin
2008/12/30 Andy Green a...@openmoko.com:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| Em Sab, Dezembro 27, 2008 04:06, Kosa escreveu:
| I've been trying to boot 2008.12 from a microsd but it just can't.
| It starts booting but then it stops with
Em Sab, Dezembro 27, 2008 04:06, Kosa escreveu:
I've been trying to boot 2008.12 from a microsd but it just can't.
It starts booting but then it stops with an Only GTA01 hardware
supported by ASoc driver message.
Happens to me also, but after that message I also have the following
messages
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| Em Sab, Dezembro 27, 2008 04:06, Kosa escreveu:
| I've been trying to boot 2008.12 from a microsd but it just can't.
| It starts booting but then it stops with an Only GTA01 hardware
| supported by ASoc
did you try so set the glamo_mci.sd_max_clk, acording to:
http://docs.openmoko.org/trac/ticket/1743 ?
Kind regards,
Ed
On Tue, 2008-12-30 at 14:17 +, Ruben Leote Mendes wrote:
Em Sab, Dezembro 27, 2008 04:06, Kosa escreveu:
I've been trying to boot 2008.12 from a microsd but it just
Em Ter, Dezembro 30, 2008 14:26, Andy Green escreveu:
I was just meddling with this in NAND, I believe that ro on the kernel
commandline is fatal for startup of 2008.12. When I removed it from Qi,
2008.08 started up OK.
So check your U-Boot env if you're using that for ro, or try adding rw
Em Ter, Dezembro 30, 2008 14:51, Ed Kapitein escreveu:
did you try so set the glamo_mci.sd_max_clk, acording to:
http://docs.openmoko.org/trac/ticket/1743 ?
I solved the problem with Andy's suggestion of removing ro from u-boot
(see another message I just sent). This was with an 8GB card from
Kosa wrote:
Hi there,
I've been trying to boot 2008.12 from a microsd but it just can't.
It starts booting but then it stops with an Only GTA01 hardware
supported by ASoc driver message.
It is not the card 'couse it works fine with fdom and shr.
I'm having the same problem here. I've
8 matches
Mail list logo
