Same problem with vmware now ...
Warning:
Name: FONTLIST_DEFAULT_TAG_STRING
Class: XmRendition
Conversion failed. Cannot load font.
Warning: No font found.
VMware Workstation Error:
Could not find a suitably small font for the LEDs. Please install the 5x7
font on your system.
P
On Thu, 2002-08-22 at 09:37, Per ?yvind Karlsen wrote:
> that's not entirely correct
> there are sources for the kernel-module, but not the GLX module
> NVIDIA_GLX-blablabla.src.rpm contains only precompiled binaries
> NVIDIA_kernel-blablabla.src.rpm cointans the source for the kernel module
> any
the contents of the 'source' kernel tar.gz :-)
-
-rwxr-xr-x1 gaborgabor1215 May 14 11:26 makedevices.sh*
-rwxr-xr-x1 gaborgabor4630 May 14 11:26 Makefile*
-rwxr-xr-x1 gaborgabor 10
Peter Ruskin <[EMAIL PROTECTED]> writes:
> > there are sources for the kernel-module, but not the GLX module
> > NVIDIA_GLX-blablabla.src.rpm contains only precompiled binaries
> > NVIDIA_kernel-blablabla.src.rpm cointans the source for the kernel
> > module anyway, the license prohibits mandrake
On Thursday 22 August 2002 09:40 am, Peter Ruskin wrote:
> On Thursday 22 Aug 2002 14:37, Per ?yvind Karlsen wrote:
> > that's not entirely correct
> > there are sources for the kernel-module, but not the GLX module
> > NVIDIA_GLX-blablabla.src.rpm contains only precompiled binaries
> > NVIDIA_ker
* Thu Aug 22 2002 Thierry Vignaud <[EMAIL PROTECTED]> 5.6-4mdk
- never output text in %post
Why is that?
--
Regards // Oden Eriksson
Deserve-IT Networks -> http://d-srv.com
$ gftp
The font "-*-helvetica-medium-r-normal--12-*-*-*-*-*-iso8859-1,
-*-arial-medium-r-normal--12-*-*-*-*-*-iso8859-1,
-*-helvetica-medium-r-normal--12-*-*-*-*-*-iso8859-15,
-*-arial-medium-r-normal--12-*-*-*-*-*-iso8859-15,*-r-*"
does not s
On Thursday 22 Aug 2002 14:37, Per ?yvind Karlsen wrote:
> that's not entirely correct
> there are sources for the kernel-module, but not the GLX module
> NVIDIA_GLX-blablabla.src.rpm contains only precompiled binaries
> NVIDIA_kernel-blablabla.src.rpm cointans the source for the kernel
> module a
[EMAIL PROTECTED] wrote:
> Hi
>
> I'm using the MDK 8.2 on my laptop (Inspiron 8200), where I'm using
> DHCP. But when I start my laptop outside of my network, the eth0
> activation make a bunch of retry to find a DHCP server before cancelling
> ( Time-out after 1 minute or something like tha
Mathieu COUSIN <[EMAIL PROTECTED]> writes:
> Hi,
>
> This is great to have schedule of the future release of Mandrake.
> But a question comes immediatly to my mind... "Will they do it again ?"
>
> When you release Mandrake 8.2, KDE 3.0 was just release few days later (if I
> remember well). You
Hi
I'm using the MDK 8.2 on my laptop (Inspiron 8200), where I'm using DHCP. But when I start my laptop outside of my network, the eth0 activation make a bunch of retry to find a DHCP server before cancelling ( Time-out after 1 minute or something like that). Is it possible to find a fix for this
I installed Mandrake 9.0 Beta 3 and
Mandrake Control Center doesn't start if LANGUAGE=pt_BR, I saw a bug
report that it doesn't starts if LANGUAGE=sl also.
Le Jeudi 22 Août 2002 15:55, Crispin Boylan a écrit :
> are you creating a new RPM with just the 2 patches or adding the two
> patches to the current mdk rpm (which has something like 12 at the moment?)
I'm trying to pactch current mdk rpm, which currently has 11 patches already.
However, none of
Have a question about the group categories in current RPM's. I've a web
page for viewing decriptions of all RPM's in cooker and contrib and I'm
wondering about categories like
Amusements/Games (1)
Applications/Internet (3)
Applications/System (2)
or even worse
Development/KDE_and_QT
Guillaume Rousse wrote:
>Le Jeudi 22 Août 2002 15:05, Crispin Boylan a écrit :
>
>
>>Hi
>>i had no troubles applying the patch to a fresh 2.4.1 tarball
>>
>>
>Me neither when doing it manually. It only fails when part of rpm building,
>and i can't figure why :-(
>
>
>
>>however it doesnt
Le Jeudi 22 Août 2002 08:06, Ben Reser a écrit :
> On Wed, Aug 21, 2002 at 10:15:43PM +0200, Olivier Thauvin wrote:
> > [Contrib-RPM]
> >
> > --=-=-=
> > Name: ecoreRelocations: (not
> > relocateable) Version : cvs20020821 Vendor:
> > Mandr
On Thursday 22 August 2002 06:06 am, Peter Ruskin wrote:
> On Thursday 22 Aug 2002 09:40, [EMAIL PROTECTED] wrote:
> > try without running artsd.
> >
> > hmm..anyone know how to really fix this?
> >
> > Danny
>
> KDE Control Centre -> Sound -> Sound Server -> General -> Autosuspend if
> idle for 1
On Thursday 22 August 2002 03:40 am, [EMAIL PROTECTED] wrote:
> try without running artsd.
>
> hmm..anyone know how to really fix this?
Run it through arts-wrapper?
--
-- Igor
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
This is great to have schedule of the future release of Mandrake.
But a question comes immediatly to my mind... "Will they do it again ?"
When you release Mandrake 8.2, KDE 3.0 was just release few days later (if I
remember well). You miss the
Am Donnerstag, 22. August 2002, 16:06:40 Uhr MET, schrieb Thomas Backlund:
> Would it be possible to include nVidia drivers in the download version?
> Just a thought, since they exist as both binary and source packages?
No,
that's impossible. They are not open source, take a look at the
license.
that's not entirely correct
there are sources for the kernel-module, but not the GLX module
NVIDIA_GLX-blablabla.src.rpm contains only precompiled binaries
NVIDIA_kernel-blablabla.src.rpm cointans the source for the kernel module
anyway, the license prohibits mandrake to ship these packages with t
I followed the suggestion of copying the beta3 CDs to disk, and using
Ron Stodden's downloader to sync up to cooker. I've successfully sync'd
3 or 4 times now, but when I try to run MakeCD, I am consistently
getting the following error (although the package name changes):
mkcd_build_hdlist: writ
Thomas Backlund wrote:
>>>Could it be possible to use them in Mandrake 9.0? Maybe they could be
>>>included into 9.0 relese?
>>>
>>
>>Are they not binary-only? They will be treated as the Nvidia, ie not in
>>the download version, hopefully drakx/XFdrake can be made to support
>>them if installe
there aren't any nvidia source packages...
the srpm you are talking about is simply a collection already-compiled
of object-files ( or how to call them in linux), so you can link them
for the current kernel... no sources.
bye,
gabor
On Thu, 2002-08-22 at 09:06, Thomas Backlund wrote:
> > > Co
Le Jeudi 22 Août 2002 15:05, Crispin Boylan a écrit :
> Hi
> i had no troubles applying the patch to a fresh 2.4.1 tarball
Me neither when doing it manually. It only fails when part of rpm building,
and i can't figure why :-(
> however it doesnt seem to have the pppoatm module in it?
You're righ
Hi
i had no troubles applying the patch to a fresh 2.4.1 tarball
however it doesnt seem to have the pppoatm module in it?
Cheers
cris.
Guillaume Rousse wrote:
>I extracted pppoatm patches for ppp-2.4.1 from Suse rpm, but i'm facing
>troubles applying them to ppp sources. Neither the original
> > Could it be possible to use them in Mandrake 9.0? Maybe they could be
> > included into 9.0 relese?
> >
> Are they not binary-only? They will be treated as the Nvidia, ie not in
> the download version, hopefully drakx/XFdrake can be made to support
> them if installed (which Nvidia drivers
Peter Ruskin <[EMAIL PROTECTED]> writes:
[...]
> > > > It's fixed in latest drakxtools. Should work in Beta3.
> > >
> > > No, it's still broken in Beta3.
> >
> > could you give me your /etc/sysconfig/clock please?
>
> UTC=false
> ARC=false
> ZONE=Europe/London
humm. I tested With "United King
Le Jeudi 22 Août 2002 08:09, Ben Reser a écrit :
> On Wed, Aug 21, 2002 at 07:22:37PM -0500, Igor Izyumin wrote:
> > On Wednesday 21 August 2002 06:09 pm, Per Øyvind Karlsen wrote:
> > > When using klipper with Actions enabled it keep show up for no reason
> > > about every minute when the system
Jure Repinc wrote:
> Hi,
>
> I have installed Ksetiwatch 2.5.0pre2 which came with 9.0 Beta 3 (CD2).
> I found one problem with it. When you right click on a client line on
> Analysis tab there is no context menu which is used to control each
> client. The menu only shows if you click on an em
Hi,
I have installed Ksetiwatch 2.5.0pre2 which came with 9.0 Beta 3 (CD2).
I found one problem with it. When you right click on a client line on
Analysis tab there is no context menu which is used to control each
client. The menu only shows if you click on an empty space below all the
client
The real problem is that usb modules are not load at startup.
For the moment, I doesn't looking this as near as possible
Le jeu 22/08/2002 à 12:16, Nicolas Abraham a écrit :
> Connecting a device doesn't change anything for lspcidrake because
> nothing appears.
> I tested with a Logitech mouse
Buchan Milne wrote:
> Are they not binary-only? They will be treated as the Nvidia, ie not in
> the download version, hopefully drakx/XFdrake can be made to support
> them if installed (which Nvidia drivers are).
>
> Buchan
I think they are binary only yes. It would be great if drakx/XFdrake
Anyone going to look at this?
Buchan Milne wrote:
> CD-ROM installation in graphical mode fails (while loading 2nd stage).
> Same with vgalo. Text installation runs.
>
> 8.2 installation works, but fails in X configuration. Booting 8.2 works,
> but XFdrake testing kills the machine (magic key
On Thu, 22 Aug 2002 10:23:27 +0200
Per Øyvind Karlsen <[EMAIL PROTECTED]> wrote:
> I had the same problem, are you using automake-1.6? I had to go back
> to automake-1.4 instead, then it worked
Same here.
Using automake-1.4-21.p6 and autoconf-2.13-14 I just rebuilt the
kdelibs-3.0.3-7mdk.src.rpm
Jure Repinc wrote:
> Hi,
>
> ATI has just released official drivers for Radeon 8500/8500LE which also
> support hardware 3D accel. Here is the page:
>
>http://mirror.ati.com/support/products/pc/radeon8500/linux/radeon8500linuxdrivers.html?cboOS=LinuxXFree86&cboProducts=RADEON+8500&cmdNext=GO%21
Yes. 115, 116, 117, 118
--- Warly <[EMAIL PROTECTED]> wrote:
> Bruce Saunders <[EMAIL PROTECTED]> writes:
>
> > Even though I have read the documentation, I
> > apparently don't know how to use Bugzilla. I
> obtained
> > an account, submitted four bugs on LM9.0 beta3,
> > received emails confi
"Combelles, Christophe (MED, ALTEN)" <[EMAIL PROTECTED]> writes:
> If the disk is full and you try to install anything with urpmi,
> it goes into an infinite loop.
Ok, I look at this.
Thanks,
François.
Le Jeudi 22 Août 2002 13:06, Crispin Boylan a écrit :
> Hi
>
> just came across this patch for pppoatm:
>
> http://www.sfgoth.com/~mitch/linux/atm/pppoatm/
>
> might solve problems patching and compiling that Guillame has been having?
>
> the page seems to be old (the kernel patch is no longer nee
If the disk is full and you try to install anything with urpmi,
it goes into an infinite loop.
On Thursday 22 Aug 2002 11:31, Daouda LO wrote:
> Peter Ruskin <[EMAIL PROTECTED]> writes:
> > On Thursday 15 Aug 2002 06:30, Daouda LO wrote:
> > > Alan Shoemaker <[EMAIL PROTECTED]> writes:
> > > > mandrakeexpert incident 29295 forwarded to cooker.
> > > > "ALLAN GUILD" <[EMAIL PROTECTED]>
> > >
Hi,
ATI has just released official drivers for Radeon 8500/8500LE which also
support hardware 3D accel. Here is the page:
http://mirror.ati.com/support/products/pc/radeon8500/linux/radeon8500linuxdrivers.html?cboOS=LinuxXFree86&cboProducts=RADEON+8500&cmdNext=GO%21
Could it be possible to use t
Hi
just came across this patch for pppoatm:
http://www.sfgoth.com/~mitch/linux/atm/pppoatm/
might solve problems patching and compiling that Guillame has been having?
the page seems to be old (the kernel patch is no longer needed and is
for 2.4.0test2!)
interestingly though, it says you need
On Thursday 22 Aug 2002 09:40, [EMAIL PROTECTED] wrote:
> try without running artsd.
>
> hmm..anyone know how to really fix this?
>
> Danny
KDE Control Centre -> Sound -> Sound Server -> General -> Autosuspend if
idle for 1 second.
>
> On Wed, 21 Aug 2002, Jonathan Drews wrote:
> > Application:
Le Jeudi 22 Août 2002 12:38, Goetz Waschk a écrit :
> Am Donnerstag, 22. August 2002, 12:31:45 Uhr MET, schrieb Guillaume Rousse:
> > * Fri Aug 23 2002 Guillaume Rousse <[EMAIL PROTECTED]>
> > 0.90-0.pre6.12mdk - gui requires same version and release of base package
>
> That was on my list of thin
Guillaume Rousse wrote:
>Would it be possible to keep 8.2 on mirrors, even after 9.0 is out ? It is
>painful for network-oriented people to resort to cdroms once installed
>version in not the current one anymore.
>
>
on most mirrors, X.2 versions of mandrake are being kept
Guillaume Rousse <[EMAIL PROTECTED]> writes:
> Would it be possible to keep 8.2 on mirrors, even after 9.0 is out ? It is
> painful for network-oriented people to resort to cdroms once installed
> version in not the current one anymore.
It is mainly a question of mirror space available.
There
On Thu, Aug 22, 2002 at 12:24:23PM +0200, Guillaume Rousse wrote:
> Would it be possible to keep 8.2 on mirrors, even after 9.0 is out ? It is
> painful for network-oriented people to resort to cdroms once installed
> version in not the current one anymore.
ftp.proxad.net at least has them:
f
Am Donnerstag, 22. August 2002, 12:31:45 Uhr MET, schrieb Guillaume Rousse:
> * Fri Aug 23 2002 Guillaume Rousse <[EMAIL PROTECTED]> 0.90-0.pre6.12mdk
> - gui requires same version and release of base package
That was on my list of things to change next release :-)
Maybe the kernel driver package
Peter Ruskin <[EMAIL PROTECTED]> writes:
> On Thursday 15 Aug 2002 06:30, Daouda LO wrote:
> > Alan Shoemaker <[EMAIL PROTECTED]> writes:
> > > mandrakeexpert incident 29295 forwarded to cooker.
> > > "ALLAN GUILD" <[EMAIL PROTECTED]>
> > >
> > > stusa : 14/08 11:26 : Incident created In both
Bruce Saunders <[EMAIL PROTECTED]> writes:
> Even though I have read the documentation, I
> apparently don't know how to use Bugzilla. I obtained
> an account, submitted four bugs on LM9.0 beta3,
> received emails confirming their submission, but when
> I try to query them I keep getting zarro b
Would it be possible to keep 8.2 on mirrors, even after 9.0 is out ? It is
painful for network-oriented people to resort to cdroms once installed
version in not the current one anymore.
--
Guillaume Rousse <[EMAIL PROTECTED]>
GPG key http://lis.snv.jussieu.fr/~rousse/gpgkey.html
"Quel Qun" <[EMAIL PROTECTED]> writes:
> Caught in /var/log/messages:
>
> xinetd[5950]: bad service attribute: only_fromi [line=9]
>
> # grep only_fromi /etc/xinetd.d/*
> /etc/xinetd.d/xadmin:only_fromi = 127.0.0.1
>
> only_from seems to be better... vi insert, I bet ;)
grrr, fixed i
rcc <[EMAIL PROTECTED]> writes:
> the GTK version in X is fine
>
> but on a console drakxservices shows an empty list, there are just the
> OK and CANCEL buttons
yep, known bug, but I don't have the time to fix at present time.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Ben Reser <[EMAIL PROTECTED]> writes:
> On Wed, Aug 21, 2002 at 12:47:01PM +0200, Guillaume Cottenceau wrote:
> > We had this problem for 8.0 or 8.1 (can't remember), it was due
> > to the fact that iptables package had a default config file, and
> > when booting it removed the rules set up by co
In level 4, this is
/boot/ root.root 700
However, access to /boot/kernel.h is often needed for compilation.
I'd suggest instead
/boot/ root.ctools 710
--
Guillaume Rousse <[EMAIL PROTECTED
"Jairo E. Serrano C." <[EMAIL PROTECTED]> writes:
> aumix -q
> vol 100, 100, P
> pcm 100, 100
> speaker 67, 67
> line 68, 68, P
> mic 0, 0, R
> cd 81, 81, P
> igain 67, 67
> line1 68, 68, P
> phin 68, 68, P
> video 68, 68, P
sound should be working then. what happens when you try to play sound
I extracted pppoatm patches for ppp-2.4.1 from Suse rpm, but i'm facing
troubles applying them to ppp sources. Neither the original patch, nor the
regenerated one with diff -Naur, work:
Patch #12 (ppp-2.4.1-pppoe.patch.bz2):
+ /usr/bin/bzip2 -d
+ patch -p1 -s
1 out of 2 hunks FAILED -- saving re
Hi,
#rm /var/cache/urpmi/rpms/
rm: détruire répertoire '/var/cache/urpmi/rpms/' ?
[ . . . ]^^^
rm: détruire répertoire '/var/cache/urpmi/rpms/' ?
Should be :
#rm /var/cache/urpmi/rpms/
rm: parcourir le répertoire '/var/cache/urpmi/rpms/' ?
[ . . . ]^^
rm: détruire r
try without running artsd.
hmm..anyone know how to really fix this?
Danny
On Wed, 21 Aug 2002, Jonathan Drews wrote:
> Application: frozen-bubble-0.9.3-6mdk
> Mandrake 9.0 Beta 3
> Computer: WalMart (Microtell)
>
>
>
>
> The game frozen-bubble freezes on startup. I find this information w
> On Wed, Aug 21, 2002 at 10:15:43PM +0200, Olivier Thauvin wrote:
> > [Contrib-RPM]
> >
> > --=-=-=
> > Name: ecoreRelocations: (not
> relocateable)
> > Version : cvs20020821 Vendor: MandrakeSoft
> > Release : 1mdk
While installing the latest beta,it shows
There was an error installing packages:
kvirc-3.0.0-0.beta1.2mdk.i586
Go on anyway?
On Thu, 2002-08-22 at 06:27, Richard G. Houser wrote:
> Also, I've yet to check where the defaults in cooker are presently, but
> last I could recall not all of the shipped mail clients were defaulting
> to the same mail directories (I had to change the pinerc in 8.2 to sync
> up with some other
On Wed, 2002-08-21 at 22:31, Austin Acton wrote:
> Are you kidding? As a newbie I tried about six distros, and one of the
> main reasons I stuck with Mandrake was because it had the most complete
> and intuitive menu.
Which does not have any flaws and cannot be improved?
On Wed, 2002-08-21 at 21
"Quel Qun" <[EMAIL PROTECTED]> writes:
[...]
> >could you test with the latest (8.12.5-1mdk)?
> >
> Yes! Thanks, Danke,
> あなたに感謝しなさ
> 356;, jërë-jëf
^^^
|||
nice one. Where do you find it?
>
> Now, where is README.mdk? missing in the spec file %doc line?
> /usr/
Ben Reser wrote:
>On Thu, Aug 22, 2002 at 12:32:33AM -0700, Ben Reser wrote:
>
>
>>subject says it all...
>>
>>
>
>correction. kdelibs doesn't build at all now. Even if I set
>WANT_AUTOCONF_2_5 it still fails out during the cvs part of make without
>giving me any error message telling me
Laurent Montel wrote:
>Le Thursday 22 August 2002 09:32, Ben Reser a écrit :
>
>
>>subject says it all...
>>
>>
>
>kdelibs doesn't need autoconf-2.5
>*** YOU'RE USING AUTOCONF 2.13. We suggest updating.
>*** autoconf 2.5x works best for now, we will drop
>*** support for autoconf 2.13 soo
Ben Reser wrote:
>On Wed, Aug 21, 2002 at 07:22:37PM -0500, Igor Izyumin wrote:
>
>
>>On Wednesday 21 August 2002 06:09 pm, Per Øyvind Karlsen wrote:
>>
>>
>>>When using klipper with Actions enabled it keep show up for no reason
>>>about every minute when the system is under high load, unde
On Thu, Aug 22, 2002 at 09:55:52AM +0200, Laurent Montel wrote:
> Sorry it works very well here.
> I recompile kdelibs each day and I never saw this problem.
> Do you use automake-1.4 ?
D'oh there we go.. I had 1.6 installed because kdevelop wants it. Isn't
it kinda dumb that to use kdevelop you
Le Thursday 22 August 2002 09:55, Ben Reser a écrit :
> On Thu, Aug 22, 2002 at 09:37:38AM +0200, Laurent Montel wrote:
> > kdelibs doesn't need autoconf-2.5
> > *** YOU'RE USING AUTOCONF 2.13. We suggest updating.
> > *** autoconf 2.5x works best for now, we will drop
> > *** support for autoco
On Thu, Aug 22, 2002 at 09:37:38AM +0200, Laurent Montel wrote:
> kdelibs doesn't need autoconf-2.5
> *** YOU'RE USING AUTOCONF 2.13. We suggest updating.
> *** autoconf 2.5x works best for now, we will drop
> *** support for autoconf 2.13 soon.
> *** Creating acinclude.m4
> !!! If you get recur
Le Thursday 22 August 2002 09:32, Ben Reser a écrit :
> subject says it all...
kdelibs doesn't need autoconf-2.5
*** YOU'RE USING AUTOCONF 2.13. We suggest updating.
*** autoconf 2.5x works best for now, we will drop
*** support for autoconf 2.13 soon.
*** Creating acinclude.m4
!!! If you get r
Hi,
On Wednesday 21 August 2002 11:58 pm, Robert Fox wrote:
> In Cooker - can we try WebDAV now? Is it safe?
I would also appreciate feedback from anyone who has used WebDAV in 9.0.
On a local Cooker machine, I can mount an iDisk from the command line after
setting up the mount point wit
On Thu, Aug 22, 2002 at 12:32:33AM -0700, Ben Reser wrote:
> subject says it all...
correction. kdelibs doesn't build at all now. Even if I set
WANT_AUTOCONF_2_5 it still fails out during the cvs part of make without
giving me any error message telling me what failed. I gotta wonder how
kdelib
Hi,
I have this problems ever since the switch to dm for X startup. The
shutdown of the system takes serveral minutes, because the gdm stays
in a restart loop for a while. The problem seems to be that the xfs
service gets killed before the dm service, that's why the restart of
gdm after the last
subject says it all...
--
Ben Reser <[EMAIL PROTECTED]>
http://ben.reser.org
If your love has no hope of being welcomed do not voice it; for if it
be silent it can endure, a guarded flame, within you.
- The Wisdom of the Sands
76 matches
Mail list logo
