Hi all
I have Exim 4.14 installed with MySQL support on OSX 10.2.4, with
Courier-IMAP 1.7.1 (also with MySQL support and mailadmin), and
squirrelMail
My problem is that when I log in via SquirrelMail (or an IMAP account
in a mail app) I get this in
/var/log/mail.log
Mar 19 12:37:24 h imapd: C
In <[EMAIL PROTECTED]>, on
03/18/03
at 12:40 PM, Bowie Bailey <[EMAIL PROTECTED]> said:
>No, the quoted string is literal. I ran the exact same command on all
>three boxes which should have given me a hashed version of the string 'my
>pass'.
>Bowie
Which it did. But as the hash output is
Fred Ho writes:
In an effort to increase the quota to 3GB, the size is being reset to less
than 2 GB. Even hand changing the maildirsize file to the desired size, it
will be reset by Courier later on to < 2GB value.
After some investigation, it may be due to the integer size limit. This
quota thin
Joe Laffey writes:
On Tue, 18 Mar 2003, Sam Varshavchik wrote:
Joe Laffey writes:
> How efficient is it to have a long list of badfrom's in bofh? Is there a
> more efficient way? This file is not hashed, right?
No, it's not. Still, even a couple of hundred of domains will not be too
bad.
So the
In an effort to increase the quota to 3GB, the size is being reset to less
than 2 GB. Even hand changing the maildirsize file to the desired size, it
will be reset by Courier later on to < 2GB value.
After some investigation, it may be due to the integer size limit. This
quota thing affects the ma
On Tue, 18 Mar 2003, Sam Varshavchik wrote:
> Joe Laffey writes:
>
> > How efficient is it to have a long list of badfrom's in bofh? Is there a
> > more efficient way? This file is not hashed, right?
>
> No, it's not. Still, even a couple of hundred of domains will not be too
> bad.
>
So the cod
I am trying to get BOFCHECKDNS turned off for certain ips. Does this look
right (from smtpaccess)?
xxx.yyy.zzz.llow,BOFHCHECKDNS=0
?? I have no clue if I am getting this syntax right, and I am not yet sure
if it is working. I do makesmtpaccess after this.
Thanks,
--
Joe Laffey
It's my understanding that not all versions of the crypt call support MD5 in
the same way (i.e. triggering it with the '$1$' seed)
HOWEVER, on 3 different versions of FreeBSD, and one other Linux, my results
are the same as your Linux.
m/
-Original Message-
From: [EMAIL PROTECTED]
[mailt
Joe Laffey writes:
How efficient is it to have a long list of badfrom's in bofh? Is there a
more efficient way? This file is not hashed, right?
No, it's not. Still, even a couple of hundred of domains will not be too
bad.
---
This SF.net ema
[EMAIL PROTECTED] writes:
Hello!
I am using qmail qwith Vpopmail 5.0 and have not installed courier-imap,
which works fine.
The only problem is that relaying does not work. In clients can authenticate
Relaying in the authvchkpw driver has been disabled due to implementation
bugs that enable rela
Alessandro Vesely writes:
Sam Varshavchik writes:
You'll just have to tune the parameters in accordance to your
mail traffic levels.
How do I know what are my mail traffic levels?
(Personally, I have small traffic and seldom run mailq.)
Look at your mail logs.
And, how do I learn what would happ
Peer Oliver Schmidt writes:
Sam Varshavchik writes:
Is there a way to configure courierfax
to try, say 3 times, before giving up?
You can specify a suitale time interval in faxqueuetime. See courier(8).
Thanks Sam.
The information for faxqueuetime references queuetime. queuetime has a default of
Jeff Jansen writes:
Up until now I have symlinked the esmtpacceptmailfor and
esmtppercentrelay files to the hosteddomains file. This
has worked fine. But I'd like now to use the aliasing
feature of hosteddomains
#man courier
Each domain can op
Jérôme Bolliet writes:
I don't have enough time today to check source, i will try later.
I can send you more information if necessary.
You should send any additional details to iso2022jp.c's author, as listed at
the top of the file. I could try to figure this out myself, if given a
sample message
Hi Sam,
Thanks for the hint regarding FAM. The problem was that FAM was
installed but not started.
TNX
--Dan
On Tuesday 18 March 2003 00:38, Sam Varshavchik wrote:
> Dan Johansson writes:
> > Hi,
> >
> > I'm trying to make the new Courier 0.42.0.
> > configure runs OK as do make
> > But when I r
No, the quoted string is literal. I ran the exact same command on all three
boxes which should have given me a hashed version of the string 'my pass'.
Bowie
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
>
> Given that the output is different for each one, if 'my pass'
> was the same on all
Up until now I have symlinked the esmtpacceptmailfor and
esmtppercentrelay files to the hosteddomains file. This
has worked fine. But I'd like now to use the aliasing
feature of hosteddomains
#man courier
Each domain can optionally be followed
On Wed, 19 Mar 2003 [EMAIL PROTECTED] wrote:
> Given that the output is different for each one, if 'my pass' was the same
> on all boxes, I would say, 'extremely portable NOT'
>
> If 'my pass' was not the same, what was the point?
>
> (or was the quoted string literal, not representational?)
>
>
Hi,
We have a customer which received mail with iso2002jp and our PHP
webmail crash inside the function imap_sort.
After some investigations, and some tests with pine, we have detected a
crash of imapd server when we are making a sort.
I have join a backtrace of the process from the core file
How efficient is it to have a long list of badfrom's in bofh? Is there a
more efficient way? This file is not hashed, right?
Thanks,
--
Joe Laffey | Want to convert subnet masks between different
LAFFEY Computer Imaging | notations, or figure the number of IPs in a block?
St. Louis
Given that the output is different for each one, if 'my pass' was the same
on all boxes, I would say, 'extremely portable NOT'
If 'my pass' was not the same, what was the point?
(or was the quoted string literal, not representational?)
Bill Hacker
In <[EMAIL PROTECTED]>, on
03/18/03
at 09
I apologize for the unrelated content:
Does anyone know why the Clam AV site has been down for a few days now? I
imagine some of the individuals on this list use Clam AV. Please feel free
to reply off list.
Gerardo A. Gregory
---
This SF
Sam Varshavchik writes:
You'll just have to tune the parameters in accordance to your
mail traffic levels.
How do I know what are my mail traffic levels?
(Personally, I have small traffic and seldom run mailq.)
And, how do I learn what would happen if non-average
conditions will occur?
TIA
Ale
Hello!
I am using qmail qwith Vpopmail 5.0 and have not installed courier-imap,
which works fine.
The only problem is that relaying does not work. In clients can authenticate
with no problem but they are not allowed to send email ("This domain isn't
in my list").
I am using authvchkpw in cou
Yeah. I get this error message with my install of courier-0.42.0 (and
did with 0.41.0 previously) on OS X as well.
I've been meaning to investigate this further, but haven't had the time
quite yet, since IMAP mostly seems to work just fine anyway. (...and
I'm still having other problems keeping
From: Matt Hyclak [mailto:[EMAIL PROTECTED]
>
> [host]$ perl
> print crypt('my pass','$1$') . "\n";
> $1$$ZgHOLxjS.UBCu4uVg70a91
> [host]$
>
> Slightly more portable, as my linux crypt(3) doesn't support md5 :-)
This is a bit off-topic, but...
I ran this script on my Win2K box:
C:\>perl
print
On Tuesday, March 18, 2003, at 01:02 PM, Anti wrote:
On Tue, 18 Mar 2003 03:01:11 -0800
"Paul Crovella" <[EMAIL PROTECTED]> wrote:
so everyone knows, i'm working on this now... have the base building
and
installing all good, that's the easy part, now need to add options
for the
different authent
Sam Varshavchik writes:
Is there a way to configure courierfax
to try, say 3 times, before giving up?
You can specify a suitale time interval in faxqueuetime. See courier(8).
Thanks Sam.
The information for faxqueuetime references queuetime. queuetime has a default of 1 week, if the file does not
In <[EMAIL PROTECTED]>, on 03/19/03
at 12:05 AM, Jono <[EMAIL PROTECTED]> said:
>Hi all
>Done some serious delving into the archives, plus some extra input from
>some personally from this list (you know who you are!) and I've managed
>to get Courier-IMAP 1.7.1 compiled with MySQL support
Gabriel Ambuehl writes:
Hi Sam Varshavchik,
you wrote.
SV> Gabriel Ambuehl writes:
Hello,
a friend of mine is currently deploying courier on some of his
machines and made me have a look at it (current installation uses
qmail+vpopmail). He claimed there are people who run courier with ALL
data in
Peer Oliver Schmidt writes:
Good day,
we are using the courierfax option. Unfortunately, most of the time the fax modem has to try more than once. Is there a way to configure courierfax to try, say 3 times, before giving up?
You can specify a suitale time interval in faxqueuetime. See courier(8)
Hi all
Done some serious delving into the archives, plus some extra input from some personally from this list (you know who you are!) and I've managed to get Courier-IMAP 1.7.1 compiled with MySQL support, on OS-X 10.2.4 (client). Wahoo!
However on boot the processes didn't appear for courier and
On Tue, 18 Mar 2003 03:01:11 -0800
"Paul Crovella" <[EMAIL PROTECTED]> wrote:
> > so everyone knows, i'm working on this now... have the base building and
> > installing all good, that's the easy part, now need to add options for the
> > different authentication methods etc... should have somethin
Hi Sam Varshavchik,
you wrote.
SV> Gabriel Ambuehl writes:
>> Hello,
>> a friend of mine is currently deploying courier on some of his
>> machines and made me have a look at it (current installation uses
>> qmail+vpopmail). He claimed there are people who run courier with ALL
>> data in a DB but
> so everyone knows, i'm working on this now... have the base building and
> installing all good, that's the easy part, now need to add options for the
> different authentication methods etc... should have something in a day or
> two...
>
> i'm just rewriting it from scratch btw, the old port is to
Good day,
we are using the courierfax option. Unfortunately, most of the time the fax modem has to try more than once. Is there a way to configure courierfax to try, say 3 times, before giving up?
TIA
rgds
pos
---
This SF.net email is sponsored
Starting from glibc-2.X crypt() support MD5 natively.
On Mon, Mar 17, 2003 at 10:58:04PM +0100, Oliver Kuehne wrote:
> Hi,
>
> I'm using debian + courier-imap + mysql
> I want to save the passwords for authentification in the mysql-database with
> md5.
> I know that I have to use the md5 with ba
Hello.
Too much often I obtain errors when I try resynchronize a shared folder.
I do not find in the logs any error that can help me.
Any idea?
---
This SF.net email is sponsored by: Does your code think in ink?
You could win a Tablet PC. Get
38 matches
Mail list logo