Package: installation-reports
Boot method: USB memory stick with ISO image embedded
Image version:
http://hammurabi.acc.umu.se/cdimage/wheezy_di_beta2/amd64/iso-cd/debian-wheezy-DI-b2-amd64-netinst.iso
Date: 2012-10-11
Machine: DELL PowerEdge T620
Processor: Intel(R) Xeon(R) CPU E5-2650 0 @
Il giorno ven, 28/01/2011 alle 10.09 -0500, Larry Irwin (Work/IMAP) ha
scritto:
Is there a way to do this with the standard installation CD/DVD's?
[...]
If your method can be done during the standard install, I'd love to know
where/when to implement it.
when the installation complete, switch
Package: installation-reports
Boot method: external DVD connected via USB
Image version: debian-squeeze-di-rc2-amd64-DVD-1
Date: Fri Jan 28 12:45:57 UTC 2011
Machine: DELL Optiplex 780 SFF
Processor: Intel core duo E7500 @2.93Ghz
Memory: 2Gb
Partitions: df -Tl will do; the raw partition table is
Hi Larry,
Il giorno lun, 24/01/2011 alle 17.07 -0500, Larry Irwin ha scritto:
[...]
A) Grub fails to install boot block.
Message: ...the file boot grub stage1 not read correctly
which has been seen in older posts, but not necessarily in this context.
grub works without LVM using manual fixed
Il giorno lun, 17/01/2011 alle 17.28 -0500, Lennart Sorensen ha scritto:
On Mon, Jan 17, 2011 at 10:51:14PM +0100, Giuseppe Sacco wrote:
[...]
Reading the documentation I found that grub2 does not support this kind
of raid controller, nor lilo does. So, it seems Debian cannot be
installed
Package: installation-reports
Boot method: DVD from external DVD reader with USB connection
Image version:
http://cdimage.debian.org/cdimage/squeeze_di_rc1/amd64/iso-cd/debian-sq-di-rc1-amd64-netinst.iso
Date: 17 January 2011
Machine: DELL OptiPlex 780 SF
Processor: Intel E7500
Memory: 2Gb
Il giorno sab, 07/03/2009 alle 22.22 +0100, Martin Michlmayr ha scritto:
* Giuseppe Sacco giuse...@eppesuigoccas.homedns.org [2009-01-24 23:43]:
Il giorno sab, 24/01/2009 alle 20.57 +0100, Martin Michlmayr ha scritto:
[...]
However, just for the record: adding pci(0) in all cases is a bad
Il giorno sab, 24/01/2009 alle 20.57 +0100, Martin Michlmayr ha scritto:
[...]
However, just for the record: adding pci(0) in all cases is a bad idea
since it will break the Indy. So if adding pci(0) is needed (and from
what you say this may not be true), we should only do it on IP32.
I
Il giorno mer, 31/12/2008 alle 16.54 +0100, Martin Michlmayr ha scritto:
* Giuseppe Sacco giuse...@eppesuigoccas.homedns.org [2008-12-29 01:36]:
... installation goes to the end and print this message about PROM:
xsetenv SystemPartition scsi(0)disk(1)rdisk(0)partition(8
Il giorno lun, 29/12/2008 alle 10.32 +0100, Martin Michlmayr ha scritto:
* Frans Pop elen...@planet.nl [2008-12-29 09:26]:
0) only the internal ethernet board is recognized. The network pci
board is not found by the first kernel. It is found after reboot with a
final kernel;
Please
Il giorno lun, 29/12/2008 alle 10.38 +0100, Giuseppe Sacco ha scritto:
[...]
The only problem I really care, related to this report, is the fdisk
error. I am looking at its source code to check if I find the bug.
I just found this problem and reported it against util-linux as bug
#510130. I
Package: installation-reports
Boot method: network via tftp
Image version:
http://cdimage.debian.org/cdimage/lenny_di_rc1/mips/jigdo-dvd/debian-testing-mips-DVD-1.jigdo
Date: 29 December 2008
Machine: Silicon Graphics O2
Processor: r5...@200mhz
Memory: 384Mb
Partitions:
sgi:~# cat
Il giorno lun, 29/12/2008 alle 08.06 +0100, Christian Perrier ha
scritto:
Quoting Giuseppe Sacco (giuse...@eppesuigoccas.homedns.org):
Package: installation-reports
Boot method: network via tftp
Image version:
http://cdimage.debian.org/cdimage/lenny_di_rc1/mips/jigdo-dvd/debian
Hi Frans,
do you mean that I have to preseed the installation using option:
d-i debian-installer/allow_unauthenticated
Thanks,
Giuseppe
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: installation-reports
Boot method: network via tftp
Image version:
http://cdimage.debian.org/cdimage/lenny_di_rc1/mips/jigdo-dvd/debian-testing-mips-DVD-1.jigdo
Date: 27 December 2008
Machine: Silicon Graphics O2
Processor: r5...@200mhz
Memory: 384Mb
Partitions:
Output of lspci -knn
Hi Giovanni,
1) In the menu: Menu principale dell'installatore Debian
1.1) please:
s/Selezionare la lingua/Choose language/Selezionare la lingua
(However keeping the English phrase could be intentional: if someone
enters in the Italian menu for mistake, they are supposed to
understand
Package: installation-reports
Boot method: CD-ROM
Image version: Debian GNU/Linux testing Etch - Official Snapshot amd64
Binary-1 (20061009)
Date: 2006-10-10
Machine: IBM eServer 326m
Processor: Dual Core AMD Opteron(tm) Processor 285
Memory: 8164632 kB
Partitions:
FilesystemType
Christian Perrier ha scritto:
[...]
May someone wuickly test whether a recent image of the etch installer
is now working on that hardware?
[...]
Hi Christian, currently I cannot access any machine with USB keyboard.
Sorry.
Bye,
Giuseppe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
While proofreading the italian translation of this manual section, I
found some references to the bugreporter package. I think that these
references should be changed in order to reflect the menuitem shown to
the user during installation (where the bugreporter text never show
up) or, otherwise, to
Joey Hess wrote:
Giuseppe Sacco wrote:
-This parameter settings will set the lowest priority of messages
+This parameter settings will set the highest priority of messages
Since this parameter settings is bad English too, I've committed a
rewritten varient.
Thanks, this was our guess too.
Riccardo Fabris pointed out an error in boot-installer/parameters.xml.
The attached patch shoud fix the problem. If you agree, I will apply it.
Bye,
Giuseppe
--- boot-installer/parameters.xml 2005-01-10 22:08:03.885978080 +0100
+++ boot-installer/parameters.xml.orig 2005-01-04 08:35:29.0
retitle 287533
thanks
I made some further tests and also had some email exchange with Promise
support and I got finally a clue about the problem: sd_mod need to be
loaded before sata_sx. This is a know problem even for the original
driver (shipped only for redhat and suse.)
So the solution might
Il giorno mer, 05-01-2005 alle 18:52 +0100, Christian Perrier ha
scritto:
[...]
However, locales have LC_PAPER precisely for this purpose, so I think
that correctly handling the defaults really should be done in
libpaper1 config script, by using LC_PAPER of course.
Actually, the default
Hi Norval,
I think you are trying something impossible since demudi is a 32bit
environment an amd64 is 64bit so you have different executable formats.
What you should have is: two different partitions for / that are only
listed in /etc/fstab for the relevant system, i.e., the 64bit system
should
Il giorno gio, 30-12-2004 alle 18:00 +0100, Geert Stappers ha scritto:
On Thu, Dec 30, 2004 at 02:44:11PM +0100, Giuseppe Sacco wrote:
After some more tests I admit I was wrong: the problem is still there.
[...]
Provide also the output of `lspci -n`
or even better:
( lspci ; lspci -n
After some more tests I admit I was wrong: the problem is still there.
Summary: d-i does not correctly handle Promise FastTrak SATA SX4.
I removed all other PCI cards and I still cannot correctly install Sarge
since whenever sd_mod is loaded the computer freeze.
A second -- and different --
Package: installation-reports
Version: daily 20041227
Debian-installer-version:
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20041227/sarge-i386-businesscard.iso
uname -a: The result of running uname -a on a shell prompt
Date: 20041228
Method: cdrom boot
Machine: HP Proliant ML110
Il giorno lun, 13-12-2004 alle 09:20 +0100, Holger Levsen ha scritto:
Hi,
[...]
On the pegasos2 (40gb ide) I still get the following error (after using
e2fsck) with parted: No implementation: This ext2 filesystem has a rather
strange layout! Parted can't resize this (yet). - Maybe because
Il giorno dom, 12-12-2004 alle 19:59 +0100, Holger Levsen ha scritto:
[...]
But on two different machines (one x86-k6 with an 160gb ide and a pegasos2
(with amiga disklabels) and a 40gb ide) I encountered two partitions which
cannot resize, which is think I should be able to do.
[...]
Hi,
Il gio, 2004-10-28 alle 21:04, Ottavio Campana ha scritto:
I've found a but when the installer looks for a dhcp server and it
doesn't find it. While in the original english it says it failed, in the
italian version it says it worked.
thanks for checking the italian translation. I just
Il mer, 2004-10-13 alle 06:20, Christian Perrier ha scritto:
Quoting Cristian Rigamonti ([EMAIL PROTECTED]):
Hi, as written in installer/doc/manual/translations.txt, I'd like to be
added to the debian-installer project as a translator.
My alioth account is cri-guest.
Of course, I
I just did a complete install and found the same problem using
debian-installer version pre-rc2.
This problem was already known many months ago, and reported in #244956.
Bye,
Giuseppe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Package: installation-reports
Version: 20040905
Severity: normal
Debian-installer-version: sarge-i386-netinst.iso, dated 20040905
uname -a: n/a
Date: 20040906
Method: netinst image
Machine: Compaq Proliant 800
Processor: 2x Intel PentiumII @ 350Mhz
Memory: 1Gb
Root Device: SCSI
Root
Joey Hess wrote:
Giuseppe Sacco wrote:
Package: installation-reports
Version: sid_d-i, 20040616
The CDROM is perfecly detected when d-i uses 2.4 kernel, but it isn't
detected when using linux 2.6. The procedure stops and ask for loading
modules from a floppy. The CDROM is connected to the SCSI
italian translation update for debian/po/it.po
Commited.
thanks, Christian.
You don't have commit access to base-config, Giuseppe ?
Yes, I do. But I was working from a different place :-(
Bye,
Giuseppe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
# This file is distributed under the same license as the debian-installer package.
# Giuseppe Sacco [EMAIL PROTECTED], 2003, 2004.
# Eugenia Franzoni [EMAIL PROTECTED], 2000.
#
msgid
msgstr
Project-Id-Version: base-config 2.09\n
Report-Msgid-Bugs-To: \n
POT-Creation-Date: 2004-06-06 19:56-0400\n
PO
Hi Giovanni,
I am maybe not the right person to answer your question, but I reported
this bug many months ago, and AFAIK it was solved.
Il mer, 2004-08-18 alle 10:36, Giovanni Ridolfi ha scritto:
[...]
When I chose Italian language, the keyboard
turned out to be not a qwerty... but an azerty
Il mer, 2004-08-18 alle 17:06, Giovanni Ridolfi ha scritto:
[...]
I chose the Italian language for installation.
Then I chose the *USB* Italian keyboard,
(by the way why usb?) but it
turned out to be not a qwerty but an azerty
and I had to use the shift key to write the
ip number of my
Il sab, 2004-07-24 alle 08:29, Christian Perrier ha scritto:
Some news from the Debian Installer string freeze as of 07/24 03:00UTC
[]
My concern are
Swedish (André unreachable, mailbox full),
Italian (all translators roasting in Adriatic beaches?)
Right there :-)
I spent some days
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Christian Perrier wrote:
| Quoting Giuseppe Sacco ([EMAIL PROTECTED]):
[...]
| If you have access to a bix with Solaris x86 installed, it may be good to
| give a recipe for finding it.
|
| Look into os-prober/recipes/mounted/i386 for some examples
I did write a floppy using the cdrom.img found in /install/floppy
and tried the installation again.
The installer asks for the floppy, I insert the floppy, it check
it and after some time and then it says that there isn't any cdrom
and prompts again for a floppy.
So, it seems that sid_d-i
Package: os-prober
Version: daily, sid_d-i
Severity: normal
I just downloaded and tested the netinstall image for i386 from
http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/
and installed Debian.
I found a problem when d-i proposed to install GRUB into the MBR since
no other operating
I just downloaded and tested the netinstall image for i386 from
http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/
and installed Debian.
In any field, I did type '/' and any other normal characters without
problem, while, if I use 'ò' or other strange chars then the input is
blocked and you
Package: installation-reports
Version: sid_d-i, 20040618
Severity: important
I just did a normal installation and rebooted the machine. Now I am
prompted by debconf for the base system configuration.
I did the complete installation using italian as language, so I see the
italian texts.
The
Package: installation-reports
Version: sid_d-i, 20040616
The CDROM is perfecly detected when d-i uses 2.4 kernel, but it isn't
detected when using linux 2.6. The procedure stops and ask for loading
modules from a floppy. The CDROM is connected to the SCSI controller.
This is the lspci output from
Il Fri, Jun 18, 2004 at 10:21:08AM +0200, Fabio Tranchitella ha scritto:
[...]
[Petter Reinholdtsen]
As far as I know, this is not currently possible to do using the
installation methods in d-i.
I would very much like to have this as well. We do this using config
file rewrites in
Il Fri, Jun 18, 2004 at 07:31:22PM +0100, Martin Michlmayr ha scritto:
I'm prety sure everything in this bug has been fixed. Can you try the
new LVM?
I will test it again during this weekend.
Bye,
Giuseppe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
Where do I find the newtasksel repository?
Thanks,
Giuseppe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
) Christian Perrier / bubulle
2) Giuseppe Sacco / eppesuig (I will have more time available from now on)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Il Sat, May 29, 2004 at 10:36:42AM -0700, Joshua Kwan ha scritto:
On Sat, 29 May 2004 15:07:18 +0200, Giuseppe Sacco wrote:
Watchdog Reset
I get the same exect nessage even with the previous image (20040527)
Typically watchdog reset means that your RAM is positioned incorrectly
Hi,
I just downloaded a sparc netimage disk (20040528) and tried
to boot an old SparcStation 20, with 64Mb RAM, cpu sun4m.
At the boot prompt, I pressed ENTER or typed 'linux ramdisk_size=NNN'
with NNN ranging between 4096 and 32768. I got always the same result:
Uncompressing image...
Loaded
Hi all,
it seems to me that quik is missing from seppy pages. Is this made on
pourpose? Is quik still required to be translated?
Thansk,
Giuseppe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Il Mon, May 03, 2004 at 12:30:03AM -0400, David Nusinow ha scritto:
Hi everyone,
I'm planning to do some massive hacking on the installation manual,
and I'm wondering how the translators would like me to proceed. I plan
to do some pretty serious editing, deleting portions completely and
Il dom, 2004-04-25 alle 00:13, Petter Reinholdtsen ha scritto:
[Giuseppe Sacco]
A second problem I understand only now is that the powerpc discover
we have in testing now is broken: every time I switch on my laptop
(powerbook g4, 15, 867Mhz) it hangs when discover run and probe
I just upgraded to discover 2.0.4-3 with discover-data 2.2004.04.09-1
and it seems that the problem is fixed.
Bye,
Giuseppe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Il gio, 2004-04-22 alle 18:55, Joey Hess ha scritto:
[...]
- powerpc: need list of working subarches (oldworld?)
I would like to have powerpc release only after having
kernel-image-2.4.25-powerpc-* version 2.4.25-8 in testing
because of #245012.
A second problem I understand only now is
Hi Sven,
it seems that the powerpc kernels are giving some problems because they
aren't using initrd.
You may find more information about this problem in #245012.
Today I had a look at your kernel package and found that the initrd is
used only in the powerpc-small version of the kernel. May I
Il Thu, Apr 22, 2004 at 08:30:38AM -0500, Steve Langasek ha scritto:
On Thu, Apr 22, 2004 at 06:15:41AM +0200, Giuseppe Sacco wrote:
[...]
Maybe the installation procedure is to be changed and the initrd
created, since actually the result is that I cannot mount the root XFS
file system
Hi,
I filed #245012 against the package installation-reports since I am
unable to find what is the right package that should handle this.
The problem is that without initrd only some filesystems are available
for mounting the root device, because they are compiled into the kernel.
I would like
Il mer, 2004-04-21 alle 22:26, Per Olofsson ha scritto:
On Wed, Apr 21, 2004 at 02:46 +0200, Giuseppe Sacco wrote:
hd:4 root=/dev/hda4 rw
but the kernel was unable to mount the root partition probably because
XFS isn't compiled into the default kernel (2.4.25-powerpc-pmac).
I
Il mer, 2004-04-21 alle 23:08, Per Olofsson ha scritto:
On Wed, Apr 21, 2004 at 22:34 +0200, Giuseppe Sacco wrote:
I just found that initrd exists also for powerpc, but I think that no
debian package provides and initrd kernel for powerpc.
I think the kernel packages provide the initrd
Il gio, 2004-04-22 alle 04:25, Steve Langasek ha scritto:
On Thu, Apr 22, 2004 at 12:00:10AM +0200, Giuseppe Sacco wrote:
Il mer, 2004-04-21 alle 23:08, Per Olofsson ha scritto:
On Wed, Apr 21, 2004 at 22:34 +0200, Giuseppe Sacco wrote:
I just found that initrd exists also for powerpc
Package: installation-reports
Version: daily 20040419
Severity: important
INSTALL REPORT
Debian-installer-version: daily 20040419
uname -a:
Date: 2004-apr-20 18:00 CET
Method: netinst CD image
Machine: Apple PowerBook G4 15
Processor: 1 PowerPC @ 867Mhz
Memory: 512Mb
Root Device:
Root
Debian Bug Tracking System wrote:
This is an automatic notification regarding your Bug report
#244926: installation-reports: partman doesn't work on powerpc,
which was filed against the installation-reports package.
It has been closed by one of the developers, namely
Per Olofsson [EMAIL
Per Olofsson wrote:
On Tue, Apr 20, 2004 at 23:58 +0200, Giuseppe Sacco wrote:
[...]
What is the appropriate package? What is the bug report number?
It has been assigned to kbd-chooser as #244956 and partman as #244957.
Perfect, thanks.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
Package: installation-reports
Version: daily 20040419
Severity: important
INSTALL REPORT
Debian-installer-version: daily 20040419
uname -a:
Date: 2004-apr-21 02:00 CET
Method: netinst CD image
Machine: Apple PowerBook G4 15
Processor: 1 PowerPC @ 867Mhz
Memory: 512Mb
Root Device:
Root
Il mar, 2004-03-30 alle 01:17, Tom Allison ha scritto:
I'm building a new USB mass storage device from the 0329 netinstall.iso:
Using the installation manual section 4.4.1:
zcat boot.img.gz /dev/sda
(was gzip -cd and not zcat)
mount -t vfat /dev/sda /mnt
cp sarge-i386-netinst.iso /mnt
Il mer, 2004-03-24 alle 06:56, Ove Kaaven ha scritto:
Package: debian-installer
Severity: normal
Tried to install sarge at Mar 24 on a machine by using
DHCP and PXE-booting on an internal network (10.x.x.x addresses),
but the base system bootstrap failed. I think the root cause is
this
Package: installation-reports
Version: beta3
Severity: normal
INSTALL REPORT
Debian-installer-version: beta3
uname -a:
Date: 2004-mar-20 18:00 CET
Method: netinst CD image
Machine: Siemens Primergy 400
Processor: 1 Pentium III, 500 Mhz
Memory: 640Mb
Root Device:
Root Size/partition table:
Il mar, 2004-03-16 alle 10:05, Sven Luther ha scritto:
On Sun, Mar 14, 2004 at 11:26:31PM +0100, Giuseppe Sacco wrote:
Il dom, 2004-03-14 alle 21:00, Joey Hess ha scritto:
[...]
powerpc: autobuilding. kdb-chooser, airport wifi (#237894)
What is the problem with autobuilding
Il Tue, Mar 16, 2004 at 09:39:25AM +0100, Sven Luther ha scritto:
On Tue, Mar 16, 2004 at 01:04:27AM +, Colin Watson wrote:
[...]
Also, i had the impression that since a month or more, i was the only
one really doing tests, so ...
I will test the new kernel and procedure on a powermac
Il dom, 2004-03-14 alle 21:00, Joey Hess ha scritto:
[...]
powerpc: autobuilding. kdb-chooser, airport wifi (#237894)
What is the problem with autobuilding? I don't know if that port still
uses the kernel I compile, but I had some problem lately and I manage to
put it up again two days
Il lun, 2004-03-15 alle 00:07, Benjamin Herrenschmidt ha scritto:
[...]
The old airport card (not airport extreme) isn't easily probed.
You can use /proc/device-tree looking for a radio node in there,
or you can use sysfs in 2.6 looking for that node on the macio bus
On 2.4.25:
$ cd
Il ven, 2004-03-12 alle 17:03, Bernhard R. Link ha scritto:
* Geert Stappers [EMAIL PROTECTED] [040312 13:47]:
[...]
What about just
'fast' 'custom' 'expert' for high medium and low.
(perhaps having 'veryfast' for critical, too)
[...]
what about: automatic, semiautomatic, detailed ?
or
Package: installation-reports
Version: netinst daily 20040313 powerpc
Severity: normal
INSTALL REPORT
Debian-installer-version: daily CD image 20040313
uname -a:
Date: 2004-feb-18 12:00 CET
Method: netinst CD image
Machine: Powerbook G4 15 TFT
Processor: 1 powerpc 867Mhz
Memory: 512Mb
Root
Il dom, 2004-03-14 alle 03:38, David Nusinow ha scritto:
[...]
My wifi card (airport) wasn't detected but wifi tools were installed. I did a
modprobe airport in tty2 and then configured via DHCP the network.
Could you please send the output of lspci and lspci -n? The correct
module to load
I just burned a new CD-RW for intel and did started the installation.
Partman, as happened on powerpc, doesn't start, i.e., it advance the
progress bar up to 14% and then nothing happen.
Bye,
Giuseppe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
Il dom, 2004-03-14 alle 04:08, David Nusinow ha scritto:
I'm having trouble finding the correct PCI ID in this list. Here's what
I think everything is so far. If someone could please shed some light on
what I've got wrong, it'd be much appreciated.
This card is the standard 802.11b sold by
Il ven, 2004-03-05 alle 10:11, Matt Kraai ha scritto:
On Fri, Mar 05, 2004 at 07:18:48AM +0100, Christian Perrier wrote:
Quoting Joey Hess ([EMAIL PROTECTED]):
[..]
Please create a new file that lists all of the characters that
you'd like to be included in the reduced font.
I don't
Hi,
two days ago I committed the italian translation of tasksel using svn.
Now I still cannot see the updated result in Denis page.
Since this is the first time I user svn, I maybe did something wrong.
Could you please check my commit?
Thanks,
Giuseppe
--
To UNSUBSCRIBE, email to [EMAIL
Il mar, 2004-02-24 alle 02:39, Joey Hess ha scritto:
[...]
- Get daily builds working.
Currently working: alpha, i386, ia64, m68k, sparc
Hppa's daily build has been down since the 17th.
Mips needs a daily build.
Powerpc's daily build is failing.
About powerpc, a
Il gio, 2004-02-19 alle 23:35, Erik Dykema ha scritto:
Hi-
What is your problem with mkfs? When I use the 'automatically
partition' feature, all the filesystems seem to get created fine.
This is the problem: I don't want to use the automatic partition since I
need a lot of partitions
Thank you for this information, but I think this is only a small subset
of the solution about system equipped with the CCISS controller.
[... about HP ProLiant DL380 ...]
Il mer, 2004-02-18 alle 15:31, Erik Dykema ha scritto:
You may find that this is also related to these bugs:
[...]
This looks like images for x86 only, which is not evident from you
mail. Where might I find test images for m68k Mac, PPC Mac, SGI Indy,
Sparc? I don't have time to do any development, but I do have time to
help test the installer.
you may find all available images at
Il dom, 2004-02-01 alle 15:58, Sven Luther ha scritto:
On Sun, Feb 01, 2004 at 03:17:25AM +0100, Giuseppe Sacco wrote:
[...]
2. the internal 811.2b wifi card isn't detected. There aren't
wireless-tools udeb for powerpc
What is the driver for this one ?
airport 3348 1
Hi all,
I just tried to commit a big patch for italian translations and got this
error. I think this is a problem in the Alioth server. Could anyone
explain/fix it?
[...]
cvs diff: [00:35:55] waiting for eppesuig's lock in
/cvsroot/d-i/debian-installer/tools/mipsel/delo-installer/debian/po
I just tried again with the latest image and the problem are still
there:
1. cdrom isn't recognized
2. the installer prompts about configuring it manually, but if you
select 'no' the installer loop on the same question.
Bye,
Giuseppe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
I just tried both CD images (testing and sid) dated 2004/01/31 on a
powerbook g4, radeon, 15.
Basically, the testing version still show some problem in the italian
translation, that aren't present in the sid image. (See #228178 and
#228347)
Many problem are present on both images:
1. the italian
Il sab, 2004-01-31 alle 14:20, Sven Luther ha scritto:
Hello,
I have been battling with the powerpc kernel-installer since a few days,
and i don't manage to get it working correctly.
[...]
I just tried and it seems to be working on a powerbook. I did use the sid netinst
image from
Il mar, 2004-01-27 alle 01:08, cobaco ha scritto:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
[...]
off course you could also turn around 1 and 2 above, first asking the
language, and then if necessary the country, though I'm unsure if that's
better.
I believe it is, since you will
Package: installation-reports
Version: 20040121
Severity: normal
INSTALL REPORT
Debian-installer-version: daily CD image 20040121
uname -a:
Date: 2004-jan-22 23:00 CET
Method: netinst CD image
Machine: Siemens Primergy 400
Processor: PentiumIII
Memory: 640Mb
Root Device:
Root Size/partition
Package: installation-reports
Severity: normal
INSTALL REPORT
Debian-installer-version: daily CD image + (floppy bootfloppy from
http://www.debian.org/devel/debian-installer/)
uname -a: Linux debian 2.4.23-1-686 #1 Sun Nov 30 20:51:10 EST 2003 i686 GNU/Linux
Date: 2004-jan-19 23:30 CET
Method:
Il dom, 2004-01-18 alle 15:12, Edoardo Panfili ha scritto:
[...]
Some little imprecision in accented Latin chars:
in [!!] Configurare e montare le partizioni appears
se ,bh(E pronti
This has already been fixed in CVS and will be available on next upload.
I still have some problem for
Il sab, 2004-01-17 alle 09:23, Christian Perrier ha scritto:
Quoting Simon Heywood ([EMAIL PROTECTED]):
[...]
I think something is wrong in msgstr
Lasciare il file system intatto, ${FSCHOICES}, Creare un'area di
swap. The quote there should probably be escaped.
The translation seems correct.
Both reported problems with the italian language were already solved in
CVS from 2004/01/06. The problem will be fixed with the next upload of
partconf-0.20.
Bye,
Giuseppe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Il mar, 2004-01-13 alle 19:29, Steve Langasek ha scritto:
On Tue, Jan 13, 2004 at 07:12:45AM +0100, Giuseppe Sacco wrote:
[...]
I jut read on a different thread that autobuilder for CD images is up
and running again, so I would stop creating them.
Er, are you talking about the autobuilder
Il lun, 2004-01-12 alle 23:34, Thorsten Sauter ha scritto:
[...]
| Should I stop creating my images for manty?
I'm not aware that someone builds images for the cdrom's. I have talked
with Joeyh (and maybe manty, can't remember :-)) because the images used
for the cdrom's are very outdated.
Il dom, 2004-01-04 alle 13:41, Filippo Giunchedi ha scritto:
Hi!
[...]
Is it possibile to include also the daily build log to see if something goes wrong?
looking at build/make/arch/linux-powerpc the cd_image target seems ok
Hi Filippo,
build log for the kernel and initrd images used by Manty
Package: debian-installer
Version: unavailable; reported 2004-01-04
Severity: normal
INSTALL REPORT
Debian-installer-version: from CVS -- 2003-jan-03
uname -a: The result of running uname -a on a shell prompt
Date: 2003-jan-03 13:30 CET
Method: manty's business cd image, dated 3rd january
Il mer, 2003-12-31 alle 10:40, Sven Luther ha scritto:
On Sat, Dec 27, 2003 at 10:21:16AM -0500, Joey Hess wrote:
[...]
Anyway, as a result i cannot commit the small fix i promised you
yesterday, so someone else will have to do it. Here it is :
[... KERNEL_FLAVOUR patch ...]
Hi Sven,
1 - 100 of 158 matches
Mail list logo
