Bug#500794: uswsusp - s2ram does not follow kernel
Quoting Bastian Blank ([EMAIL PROTECTED]): It is unusable on an unknown amount of machines. I would have no problem with that if it is only installed on request, but it is included in the laptop task and therefor a standard package. So? That still makes a good argument for Severity: important if you think that this deserve such importance.. This could make an argument to remove it from the laptop task, maybe. (please note that I do not necessarily agree with both of those statements, I just bring you less violent options than an RC bug) But I don't see this as enough to virtually suggest that the package as is should not be shipped with lenny. As Sven pointed later, does the kernel driver know what machines will properly wake up after suspend? From my experience, this is mandatory. signature.asc Description: Digital signature
Bug#491788: Announce of an upcoming upload for the xsp package
Dear maintainer of xsp and Debian translators, Some days ago, I sent a notice to the maintainer of the xsp Debian package, mentioning the status of at least one old po-debconf translation update in the BTS. The package maintainer and I agreed for a translation update round. At the end of this period, I will send him|her a full patch so that an l10n upload can happen. The full planned schedule is available at the end of this mail. The package is currently translated to: cs de es eu fi fr gl nl pt ru si sv vi Among these, the following translations are incomplete: es If you did any of the, currently incomplete, translations you will get ANOTHER mail with the translation to update. Other translators also have the opportunity to create new translations for this package. Once completed, please send them as a bug report against the xsp package so I can incorporate them in the build. The deadline for receiving updates and new translations is Wednesday, October 08, 2008. If you are not in time you can always send your translation to the BTS. The POT file is attached to this mail. Schedule: Wednesday, October 01, 2008 : send the first intent to NMU notice to the package maintainer. Thursday, October 02, 2008 : send this notice Wednesday, October 08, 2008 : (midnight) deadline for receiving translation updates Thursday, October 09, 2008 : Send a summary to the maintainer. Maintainer uploads when possible. Thanks for your efforts and time. -- -- # SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR [EMAIL PROTECTED], YEAR. # #, fuzzy msgid msgstr Project-Id-Version: PACKAGE VERSION\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2008-02-18 00:21+0100\n PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n Last-Translator: FULL NAME [EMAIL PROTECTED]\n Language-Team: LANGUAGE [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=CHARSET\n Content-Transfer-Encoding: 8bit\n #. Type: boolean #. Description #: ../mono-apache-server.templates:1001 msgid Let mono-apache-server restart Apache? msgstr #. Type: boolean #. Description #: ../mono-apache-server.templates:1001 msgid The debian version of mono-apache-server includes a mono-server-update script that creates a configuration file for apache to start the ASP.NET applications, and mono-server-update can restart apache if there's a new configuration file (/etc/mono-server/mono-server-hosts.conf). If this is true, then apache will be restarted when there is a new mono-server-hosts. conf file. msgstr #. Type: boolean #. Description #: ../mono-xsp.templates:1001 ../mono-xsp2.templates:1001 msgid Start on boot? msgstr #. Type: boolean #. Description #: ../mono-xsp.templates:1001 msgid If this is true, then XSP will automatically start when the computer is turned on. msgstr #. Type: string #. Description #: ../mono-xsp.templates:2001 ../mono-xsp2.templates:2001 msgid Bind to address: msgstr #. Type: string #. Description #: ../mono-xsp.templates:2001 msgid To function properly, XSP needs to be bound to an IP address. The default (\0.0.0.0\) binds to all addresses of the server, but a specific port can be selected. To use XSP only locally, use \127.0.0.1\ for the address. msgstr #. Type: string #. Description #: ../mono-xsp.templates:3001 ../mono-xsp2.templates:3001 msgid Bind to port: msgstr #. Type: string #. Description #: ../mono-xsp.templates:3001 ../mono-xsp2.templates:3001 msgid XSP is bound to a specific port on the server. Common values are 80, 8080, or 8081. msgstr #. Type: boolean #. Description #: ../mono-xsp2.templates:1001 msgid If this is true, then XSP2 will automatically start when the computer is turned on. msgstr #. Type: string #. Description #: ../mono-xsp2.templates:2001 msgid To function properly, XSP2 needs to be bound to an IP address. The default (\0.0.0.0\) binds to all addresses of the server, but a specific port can be selected. To use XSP2 only locally, use \127.0.0.1\ for the address. msgstr signature.asc Description: Digital signature
Bug#500858: lazarus and lintian warnings
unsubscribe On Thu, Oct 2, 2008 at 3:01 PM, Paul Gevers [EMAIL PROTECTED] wrote: Package: lazarus Version: 0.9.24-0-12 Severity: wishlist Thanks Please have a look at the lintian warnings at [1]: * dh-make-template-in-source and debian-files-list-in-source I filed this bug upstream at [2] some time ago. * out-of-date-standards-version and patch-system-but-direct-changes-in-diff + If I am correct using the patch system to convey all the changes should allow to bump the standards version. + If I understand correctly having configure in the dependencies of the clean rule in debian/rules makes the diff.gz file contain a lot of generated (and thus unnecessary) changes in the Makefiles. + A README.source should be added to explain the use of the patch system. With kind regards, Paul Gevers [1] http://lintian.debian.org/reports/maintainer/[EMAIL PROTECTED] [2] http://mantis.freepascal.org/view.php?id=12201 -- There is neither Jew or Greek, slave or free, male or female, gay or straight, black or white, conservative or liberal, Christian or Muslim: for you are all one... (Galatians 3:28)
Bug#500861: electricsheep: first sheep never downloaded
Package: electricsheep Version: 2.6.8-9 Severity: normal I have tried the package about 1 month or 2 ago and had the same problem. Here is what I get after my first install and run : $ electricsheep --debug 1 = electric sheep v2.6.8 time Thu Oct 2 02:10:40 2008 decoder execvp mpeg2dec_onroot -f 23 -w -1 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:10:40 2008 please be patient while the first sheep is downloaded... updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:10:50 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:11:00 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:11:10 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:11:20 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:11:30 2008 time Thu Oct 2 02:11:40 2008 list nice -n 10 curl --silent --show-error 'http://v2d6.sheepserver.net/cgi/list?v=LNX_2.6.8u=F26B187D157B27D2'| gunzip -c updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:11:40 2008 updating cache path=/home/xxx/.sheep/ match_gen=1 best_anim=274 best_anim_id=25487 best_rating=220 best_ctime=168281 begin delete cached nothing cached download 274 id=25487 about to nice -n 10 curl --silent --show-error --output /home/xxx/.sheep/00202=25487=25487=25487.mpg.tmp http://sheep.arces.net.nyud.net:8080/202/125487/sheep.mpg updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:11:50 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:12:00 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:12:10 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:12:20 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:12:30 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:12:40 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:12:50 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:13:00 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:13:10 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:13:20 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:13:30 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:13:40 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:13:50 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:14:00 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:14:10 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:14:20 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:14:30 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:14:40 2008 curl: (7) couldn't connect to host subprocess error: anim download, 1792=78+0 download failed of sheep 25487 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:14:50 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:15:00 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:15:10 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:15:20 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:15:30 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:15:40 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:15:50 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:16:00 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:16:10 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:16:20 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:16:30 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:16:40 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:16:50 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:17:00 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:17:10 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:17:20 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:17:30 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:17:40 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:17:50 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:18:00 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:18:10 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:18:20 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:18:30 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2 02:18:40 2008 updating cache path=/home/xxx/.sheep/ match_gen=0 time Thu Oct 2
Bug#500862: vzctl: does not setup /etc/mailname
Package: vzctl
Version: 3.0.22-11
Severity: normal
Tags: patch
*** Please type your report below this line ***
The vzctl startup script /etc/vz/dists/scripts/debian-set_hostname.sh
does not setup /etc/mailname properly. It's left with localhost set.
The following patch should solve this. It also removes a small cosmetic
bug: The function set_hostname did not use the ${cfgfile} variable.
--- /tmp/debian-set_hostname.sh 2008-10-01 15:32:06.0 +0200
+++ /etc/vz/dists/scripts/debian-set_hostname.sh2008-10-01
15:32:19.0 +0200
@@ -32,11 +32,12 @@
local hostname=$2
[ -z ${hostname} ] return 0
- echo ${hostname} /etc/hostname
+ echo ${hostname} ${cfgfile}
hostname ${hostname}
}
change_hostname /etc/hosts ${HOSTNM} ${IP_ADDR}
set_hostname /etc/hostname ${HOSTNM}
+set_hostname /etc/mailname ${HOSTNM}
exit 0
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (900, 'stable'), (500, 'proposed-updates'), (90, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/dash
Kernel: Linux 2.6.26-bpo.1-openvz-686
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Versions of packages vzctl depends on:
ii iproute20061002-3Professional tools to control the
ii libc6 2.3.6.ds1-13etch7 GNU C Library: Shared libraries
ii vzquota3.0.11-1 server virtualization solution - q
Versions of packages vzctl recommends:
ii rsync 2.6.9-2etch2 fast remote file copy program (lik
-- no debconf information
--
Lieber...
eine Latte in der Hose als ein Brett vor dem Kopf.
PGP Key: 0x1E727CE6 / 9085 48BD 8332 4BFC D80C A6CF D162 20BB 1E72 7CE6
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500863: [python-vobject] new upstream release (0.7.1)
Package: python-vobject Version: 0.6.0-1 Severity: wishlist --- Please enter the report below this line. --- Hello, check this page: http://vobject.skyhouseconsulting.com/history.html --- System information. --- Architecture: i386 Kernel: Linux 2.6.26-1-686 Debian Release: lenny/sid 500 unstable127.0.0.1 500 stable dl.google.com --- Package information. --- Depends (Version) | Installed ==-+-=== python(= 2.4) | 2.5.2-2 python-dateutil (= 1.1) | 1.4-1 python-support (= 0.7.1) | 0.8.6 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500818: memtest86+: don't work when compiled with gcc-4.3
I was looking through the RC bug list and I noticed this one. The following bugs suggest that switching from -Os to -O1 may fix the problem: http://bugs.gentoo.org/show_bug.cgi?id=217324 https://bugs.launchpad.net/ubuntu/+source/memtest86+/+bug/246412 Hope this helps -- Rob Browning rlb @defaultvalue.org and @debian.org; previously @cs.utexas.edu GPG as of 2002-11-03 14DD 432F AE39 534D B592 F9A0 25C8 D377 8C7E 73A4 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500210: perldoc perlrun spits out junk in synopsis
On Wed, Oct 01, 2008 at 11:26:23AM -0700, Russ Allbery wrote: Niko Tyni [EMAIL PROTECTED] writes: I think that for lenny you may want to back out of the --utf8 change and give it some time to settle. Are you referring to backing out the whole Pod::Man update (#480997) or just the hardcoded 'pod2man --utf8' in perldoc (#492037) ? Sorry, I meant only the pod2man --utf8 change in perldoc. I think that the behavior of pod2man, while not ideal, is still basically okay for lenny, although I'll be releasing a new version of podlators that will implement the changes described in my previous mail. Thanks, we're on the same page then. I'll revert the perldoc change. Does this documentation patch for lenny look OK to you? (I suppose it should be duplicated in pod2man.PL too.) diff --git a/lib/Pod/Man.pm b/lib/Pod/Man.pm index 961171b..a3eac5a 100644 --- a/lib/Pod/Man.pm +++ b/lib/Pod/Man.pm @@ -1592,6 +1592,13 @@ be warned that *roff source with literal UTF-8 characters is not supported by many implementations and may even result in segfaults and other bad behavior. +Be aware that using this option currently only works properly on UTF-8 +encoded POD files that use the C=encoding POD command. If the option +is enabled on an input POD file that doesn't declare an =encoding of +UTF-8, any use of S in that POD file will result in invalid UTF-8, +even if there's no use of high-bit characters in the input POD at all. +This is a bug that will be fixed in later versions. + =back The standard Pod::Simple method parse_file() takes one argument naming the @@ -1627,6 +1634,9 @@ invalid. A quote specification must be one, two, or four characters long. =head1 BUGS +As mentioned earlier in this document, the Cutf8 option is currently +broken on non-UTF-8 input. + There is currently no way to turn off the guesswork that tries to format unmarked text appropriately, and sometimes it isn't wanted (particularly when using POD to document something other than Perl). Most of the work -- Niko Tyni [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500864: ITP: python-wordaxe -- germanic (and basic) hyphenation algorithms
Package: wnpp Severity: wishlist Owner: Trent W. Buck [EMAIL PROTECTED] The rst2pdf utility (see #496864) cannot create hyphenated output without this library. Therefore I wish to package it for Debian. Attached is a minimal, draft .diff.gz that I have created. I do not intend to do further work on wordaxe until rst2pdf makes it through NEW. * Package name: python-wordaxe Version : 0.2.6 Upstream Author : Henning von Bargen [EMAIL PROTECTED] * URL : http://deco-cow.sf.net/ * License : Apache2.0 | BSD-2 Programming Lang: Python Description : germanic (and basic) hyphenation algorithms The wordaxe library (formerly known as deco-cow) provides Python programs with the ability to automatically hyphenate words using an algorithm which is based on decomposition of compound words into base words, and is named DCWHyphenator in the code. . Currently, only German language is supported for the DCWHyphenator. Other germanic languages like Nederlands, Dansk, etc. that make heave use of compound words should profit from the algorithm as well - as soon as someone provides a word base. . Apart from the DCWHyphenator, the library supports other algorithms as well: . * BaseHyphenator is language-independent and splits words only after a few special characters (in particular, '-'). . * PyHnjHyphenator is a pure Python implementation of the hyphenation algorithm used in TeX and OpenOffice. . The library can be used as a simple add-on to the ReportLab PDF library, adding support for automatic hyphenation in the Paragraph line-breaking method. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#468797: Build logs availavble for several architectures
In Ubuntu, we used a modified patch [1] to build dynamips for every supported architecture, build logs are available at [2]. Ubuntu and Debian don't differ too much, so you should be able to build dynamips for every architecture too. [1]http://launchpadlibrarian.net/18108885/dynamips_0.2.7-0.2.8RC2-2_0.2.7-0.2.8RC2-2ubuntu1.diff.gz [2]https://launchpad.net/ubuntu/+source/dynamips/0.2.7-0.2.8RC2-2ubuntu1 Hope this helps. -- . ''`. Luca Falavigna : :' : Ubuntu MOTU Developer `. `'` Debian Maintainer `- GPG Key: 0x86BC2A50 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500865: git-dch submodule support
Package: git-buildpackage Severity: wishlist Manoj keeps debian/ in a git submodule (do others also use this workflow?). In this case git-dch can't detect all the changes, here's what could be done (as suggested by Manoj): first find the top of the tree : , | base_dir=$(git-rev-parse --show-cdup 2/dev/null) || return 1 | if [[ -n $base_dir ]]; then | base_dir=$(readlink -f $base_dir) | else | base_dir=$PWD | fi ` Then it can explicitly look for $base_dir/.gitmodules, and for path = debian in there, to see if it is a module (alternately, simply look for $base_dir/debian/.git, which is less clever, but still works). Then it can just cd $base_dir/debian/, and gather more things to add. The problem probably is keeping track of a second set of commits; we need not just the build branch, we now need a ./debian submodule branch, -- Guido -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500866: /usr/bin/pulseaudio: terminate with message CPU time limit exhausted
Package: pulseaudio
Version: 0.9.10-3
Severity: important
File: /usr/bin/pulseaudio
When i listen to Music with mpd over pulseaudio, pa crashes whith the
following lines:
Soft CPU time limit exhausted, terminating.
Hard CPU time limit exhausted, terminating forcibly.
It will happen sometimes.
And when i listen to music (really music) i got befor the crash
thousands of this lines:
D: memblock.c: Pool full
I won't get the last line, when i listen to speaking voices
This line will even come when the music is light and slow, or only a
sound like a Digeridou in background of speaking voices.
my config:
cat daemon.conf |grep -v '^#\|^;'|sed '/^$/d'
high-priority = yes
nice-level = -11
realtime-priority = 5
default-sample-rate = 48000
default-sample-channels = 2
default-fragments = 8
default-fragment-size-msec = 25
resample-method = speex-float-3
cat default.pa| grep -v '^#\|^;'|sed '/^$/d'
load-module module-alsa-sinksink_name=output device=hw:0
load-module module-alsa-source source_name=input device=hw:0
load-module module-native-protocol-unix auth-anonymous=1
load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1
load-module module-esound-protocol-unix auth-anonymous=1
load-module module-esound-protocol-tcp auth-ip-acl=127.0.0.1
load-module module-volume-restore
load-module module-rescue-streams
set-default-sink output
set-default-source input
cat /etc/asound.conf |grep -v '^[[:space:]]*#\|^;'|sed '/^$/d'
master.pulse {
type pulse
}
ctl.pulse {
type pulse
}
pcm.!default {
type pulse
}
master.!default {
type pulse
}
ctl.!default {
type pulse
}
pcm.mpd {
type pulse
}
ctl.mpd {
type pulse
}
pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
}
--
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_AT.UTF-8, LC_CTYPE=de_AT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages pulseaudio depends on:
ii adduser 3.110 add and remove users and groups
ii libasound21.0.16-2 ALSA library
ii libasyncns0 0.3-1 Asyncronous name service query lib
ii libc6 2.7-13 GNU C Library: Shared libraries
ii libcap1 1:1.10-14 support for getting/setting POSIX.
ii libdbus-1-3 1.2.1-3simple interprocess messaging syst
ii libflac8 1.2.1-1.2 Free Lossless Audio Codec - runtim
ii libltdl3 1.5.26-4 A system independent dlopen wrappe
ii libogg0 1.1.3-4Ogg Bitstream Library
ii liboil0.3 0.3.15-1 Library of Optimized Inner Loops
ii libpulsecore5 0.9.10-3 PulseAudio sound server core
ii libsamplerate00.1.4-1audio rate conversion library
ii libsndfile1 1.0.17-4 Library for reading/writing audio
ii libwrap0 7.6.q-16 Wietse Venema's TCP wrappers libra
ii lsb-base 3.2-20 Linux Standard Base 3.2 init scrip
Versions of packages pulseaudio recommends:
ii gstreamer0.10-pulseaudio 0.9.7-2 GStreamer plugin for PulseAudio
ii libasound2-plugins 1.0.16-1+b1 ALSA library additional plugins
ii padevchooser 0.9.3-2 PulseAudio Device Chooser
ii paprefs 0.9.6-2 PulseAudio Preferences
ii pulseaudio-esound-compat 0.9.10-3PulseAudio ESD compatibility layer
ii pulseaudio-module-hal0.9.10-3HAL device detection module for Pu
ii pulseaudio-module-x110.9.10-3X11 module for PulseAudio sound se
Versions of packages pulseaudio suggests:
ii paman0.9.4-1 PulseAudio Manager
ii pavucontrol 0.9.6+svn20080426-1 PulseAudio Volume Control
ii pavumeter0.9.3-1 PulseAudio Volume Meter
ii pulseaudio-utils 0.9.10-3Command line tools for the PulseAu
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500867: RFP: python-pyhyphen -- Python wrapper for libhyphen
Package: wnpp Severity: wishlist The rst2pdf utility (see #496864) can apparently do much better hyphenating when the pyhyphen library is installed. In fact, rst2pdf currently has some bugs[0] that make hyphenating break entirely unless pyhyphen is present. Packaging this turns out to be a nightmare, because setup.py does horrible things[1], and I don't have enough Python-fu to tell it to use libhyphen-dev instead of the convenience copy. [0] http://code.google.com/p/rst2pdf/issues/detail?id=76 [1] http://code.google.com/p/pyhyphen/issues/detail?id=2 * Package name: python-pyhyphen Version : 0.8 Upstream Author : Dr. Leo [EMAIL PROTECTED] * URL : http://code.google.com/p/pyhyphen * License : GPL 2.0 | LGPL 2.1 | MPL 1.1 Programming Lang: Python Description : Python wrapper for libhyphen PyHyphen is a wrapper for the Python programming language around the Open Source C library 'hyphen-2.3' originally from hnjlib. It is widely used in software such as OpenOffice.org and Mozilla. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500862: vzctl: does not setup /etc/mailname
Hi Sebastian
Thanks a lot for the bug report. With this mail I'll forward this
upstream as well so they are aware of it.
Best regards,
// Ola
On Thu, Oct 02, 2008 at 08:39:12AM +0200, Sebastian Klamar wrote:
Package: vzctl
Version: 3.0.22-11
Severity: normal
Tags: patch
*** Please type your report below this line ***
The vzctl startup script /etc/vz/dists/scripts/debian-set_hostname.sh
does not setup /etc/mailname properly. It's left with localhost set.
The following patch should solve this. It also removes a small cosmetic
bug: The function set_hostname did not use the ${cfgfile} variable.
--- /tmp/debian-set_hostname.sh 2008-10-01 15:32:06.0 +0200
+++ /etc/vz/dists/scripts/debian-set_hostname.sh2008-10-01
15:32:19.0 +0200
@@ -32,11 +32,12 @@
local hostname=$2
[ -z ${hostname} ] return 0
- echo ${hostname} /etc/hostname
+ echo ${hostname} ${cfgfile}
hostname ${hostname}
}
change_hostname /etc/hosts ${HOSTNM} ${IP_ADDR}
set_hostname /etc/hostname ${HOSTNM}
+set_hostname /etc/mailname ${HOSTNM}
exit 0
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (900, 'stable'), (500, 'proposed-updates'), (90, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/dash
Kernel: Linux 2.6.26-bpo.1-openvz-686
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Versions of packages vzctl depends on:
ii iproute20061002-3Professional tools to control the
ii libc6 2.3.6.ds1-13etch7 GNU C Library: Shared libraries
ii vzquota3.0.11-1 server virtualization solution -
q
Versions of packages vzctl recommends:
ii rsync 2.6.9-2etch2 fast remote file copy program
(lik
-- no debconf information
--
Lieber...
eine Latte in der Hose als ein Brett vor dem Kopf.
PGP Key: 0x1E727CE6 / 9085 48BD 8332 4BFC D80C A6CF D162 20BB 1E72 7CE6
--
- Ola Lundqvist ---
/ [EMAIL PROTECTED] Annebergsslingan 37 \
| [EMAIL PROTECTED] 654 65 KARLSTAD |
| http://inguza.com/ +46 (0)70-332 1551 |
\ gpg/f.p.: 7090 A92B 18FE 7994 0C36 4FE4 18A1 B1CF 0FE5 3DD9 /
---
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#499250: vzctl: bashism in vznetcfg
Hi Openvz bug http://bugzilla.openvz.org/show_bug.cgi?id=1036 created. // Ola On Wed, Sep 17, 2008 at 12:33:13PM +0300, Viktar Vauchkevich wrote: Package: vzctl Version: 3.0.22-11 Severity: normal -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-openvz-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages vzctl depends on: ii iproute 20080725-2 networking and traffic control too ii libc6 2.7-13 GNU C Library: Shared libraries ii vzquota 3.0.11-1 server virtualization solution - q Versions of packages vzctl recommends: ii rsync 3.0.4-2fast remote file copy program (lik Versions of packages vzctl suggests: pn linux-patch-openvznone (no description available) -- no debconf information -- - Ola Lundqvist --- / [EMAIL PROTECTED] Annebergsslingan 37 \ | [EMAIL PROTECTED] 654 65 KARLSTAD | | http://inguza.com/ +46 (0)70-332 1551 | \ gpg/f.p.: 7090 A92B 18FE 7994 0C36 4FE4 18A1 B1CF 0FE5 3DD9 / --- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500862: vzctl: does not setup /etc/mailname
OpenVZ bug created for this.
http://bugzilla.openvz.org/show_bug.cgi?id=1035
Best regards,
// Ola
On Thu, Oct 02, 2008 at 08:39:12AM +0200, Sebastian Klamar wrote:
Package: vzctl
Version: 3.0.22-11
Severity: normal
Tags: patch
*** Please type your report below this line ***
The vzctl startup script /etc/vz/dists/scripts/debian-set_hostname.sh
does not setup /etc/mailname properly. It's left with localhost set.
The following patch should solve this. It also removes a small cosmetic
bug: The function set_hostname did not use the ${cfgfile} variable.
--- /tmp/debian-set_hostname.sh 2008-10-01 15:32:06.0 +0200
+++ /etc/vz/dists/scripts/debian-set_hostname.sh2008-10-01
15:32:19.0 +0200
@@ -32,11 +32,12 @@
local hostname=$2
[ -z ${hostname} ] return 0
- echo ${hostname} /etc/hostname
+ echo ${hostname} ${cfgfile}
hostname ${hostname}
}
change_hostname /etc/hosts ${HOSTNM} ${IP_ADDR}
set_hostname /etc/hostname ${HOSTNM}
+set_hostname /etc/mailname ${HOSTNM}
exit 0
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (900, 'stable'), (500, 'proposed-updates'), (90, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/dash
Kernel: Linux 2.6.26-bpo.1-openvz-686
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Versions of packages vzctl depends on:
ii iproute20061002-3Professional tools to control the
ii libc6 2.3.6.ds1-13etch7 GNU C Library: Shared libraries
ii vzquota3.0.11-1 server virtualization solution -
q
Versions of packages vzctl recommends:
ii rsync 2.6.9-2etch2 fast remote file copy program
(lik
-- no debconf information
--
Lieber...
eine Latte in der Hose als ein Brett vor dem Kopf.
PGP Key: 0x1E727CE6 / 9085 48BD 8332 4BFC D80C A6CF D162 20BB 1E72 7CE6
--
- Ola Lundqvist ---
/ [EMAIL PROTECTED] Annebergsslingan 37 \
| [EMAIL PROTECTED] 654 65 KARLSTAD |
| http://inguza.com/ +46 (0)70-332 1551 |
\ gpg/f.p.: 7090 A92B 18FE 7994 0C36 4FE4 18A1 B1CF 0FE5 3DD9 /
---
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500868: Does not provide openoffice.org-hyphenation
Package: openoffice.org-hyphenation-en-us Version: 2.4-2 Severity: normal I don't understand why this package doesn't provide the virtual package openoffice.org-hyphenation. Observe the discrepancy: $ aptitude -F %p search ~nopenoffice.org-hyphenation /tmp/y $ aptitude -F %p search ~Popenoffice.org-hyphenation /tmp/x $ diff -u /tmp/[xy] --- /tmp/x 2008-10-02 17:17:56.053366769 +1000 +++ /tmp/y 2008-10-02 17:17:51.705362693 +1000 @@ -1,12 +1,14 @@ -myspell-et -myspell-lv +openoffice.org-hyphenation openoffice.org-hyphenation-af openoffice.org-hyphenation-de +openoffice.org-hyphenation-en-us +openoffice.org-hyphenation-et +openoffice.org-hyphenation-fi openoffice.org-hyphenation-hr openoffice.org-hyphenation-hu openoffice.org-hyphenation-it openoffice.org-hyphenation-lt +openoffice.org-hyphenation-lv openoffice.org-hyphenation-pl openoffice.org-hyphenation-sl openoffice.org-hyphenation-zu -openoffice.org-voikko There's no difference between the kind of files provided by these packages: $ apt-file show openoffice.org-hyphenation-en-us | cut -d: -f2 /usr/share/doc/openoffice.org-hyphenation-en-us/changelog.Debian.gz /usr/share/doc/openoffice.org-hyphenation-en-us/changelog.gz /usr/share/doc/openoffice.org-hyphenation-en-us/copyright /usr/share/myspell/dicts/hyph_en_US.dic /usr/share/myspell/infos/ooo/openoffice.org-hyphenation-en-us $ apt-file show openoffice.org-hyphenation-de | cut -d: -f2 /usr/share/doc/openoffice.org-hyphenation-de/changelog.Debian.gz /usr/share/doc/openoffice.org-hyphenation-de/copyright /usr/share/myspell/dicts/hyph_de_DE.dic /usr/share/myspell/infos/ooo/openoffice.org-hyphenation-de -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=en_AU.utf8, LC_CTYPE=en_AU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#495667: VEs started during the boot can't use network sometimes
Hi I have created openvz bug http://bugzilla.openvz.org/show_bug.cgi?id=1037 now. // Ola On Tue, Aug 19, 2008 at 04:58:43PM +0200, Frank Bauer wrote: Package: vzctl Hi, I'm running stock i386 lenny with current -openvz kernel from unstable. Everything runs fine, except the VEs that are started during the boot. Sometimes they can't use the network, as if ip_forwarding is not active, Which is not the case, I have the following in /etc/sysctl.conf: net.ipv4.ip_forward=1 I can fix this by restarting the VEs - after that the networking works ok. I believe this might be a race condition like starting OpenVZ before the ip_forwarding feature is set, because it only happens with VEs stared during the boot: 1) When I start VE manually (i.e. some time after the boot), networking works. 2) When I restart VE, networking works. 3) When I let the rc script to start VE, I have like 50% chance networking will not work. Kind Regards Frank -- - Ola Lundqvist --- / [EMAIL PROTECTED] Annebergsslingan 37 \ | [EMAIL PROTECTED] 654 65 KARLSTAD | | http://inguza.com/ +46 (0)70-332 1551 | \ gpg/f.p.: 7090 A92B 18FE 7994 0C36 4FE4 18A1 B1CF 0FE5 3DD9 / --- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#494444: kacpid is in uninteruptible sleep and produces loads 1
Hi, I confirm this bug. Upgrading from 2.6.25-2 to 2.6.26-1 caused kacpi and kacpi_notify processes to use more tha 75% of my CPU. My laptop is a Dell Precision M70. On my config they are interuptible but kill -9 has not effect on them. $ ps aux|grep kacpi root41 0.4 0.0 0 0 ?S Oct01 5:16 [kacpid] root42 0.9 0.0 0 0 ?R Oct01 11:41 [kacpi_notify] $ top ... PID USER PR NI VIRT RES SHR S %CPU %MEMTIME+ COMMAND 42 root 15 -5 000 S 54.3 0.0 12:17.65 kacpi_notify 41 root 15 -5 000 S 24.6 0.0 5:33.28 kacpid I found a report for a similar problem in Kernel bugtracker, but it concerned previous versions of the kernel and was rejected : http://bugzilla.kernel.org/show_bug.cgi?id=8274 I have to downgrade to 2.6.25-2 as acpi is important for me. -- Nicolas Duboc [EMAIL PROTECTED] signature.asc Description: Digital signature
Bug#499963: [Calendarserver-maintainers] Bug#499963: calendarserver: caldavd fails to authenticate and autocreate principal when running with NssDirectoryService
On Wed, Oct 01, 2008 at 04:24:58PM -0700, Ben Poliakoff wrote: Alright I see what's going on. The NssDirectoryService is required by the DirectoryService class to support three methods: recordTypes() listRecords() recordWithShortName() Thanks for debugging this! Now that we knew that the xml service works I was about to let you add debug code that prints out the users found in listRecords but you found out yourself already. My server is configured to use files and LDAP for NSS calls. We have several thousand users in our LDAP directory and implement the default limit of 500 search results. As a result 'getent passwd' returns a subset of all valid accounts (not including the 'benp' account). Yes, the nss service is basically meant for smaller installations as a quick means of not having double account maintenance, it's far to slow for that many users (calendarsever itself will have problems with this itlself - at least in 1.2). This can be used if only a few users need a calendar: add an hasCalendar attribute to every PosixAccount and filter in libnss-ldap by using the nss_base_passwd base?scope?hasCalendar=True (in case you use a separate machine for the calendar server). I'm doing something similar to cut down on the number of groups being looked at. I think I might take a stab at writing a generic LDAPDirectoryService using your NssDirectoryService as an example. There's already code in the calendarserver.org bugtracker for that. It might be worth testing it out and reporting back. So in the end this isn't really a bug with NssDirectoryService; but it's probably worth noting in the documentation that NssDirectoryService will only work properly within an environment where *all* valid users can be retrieved via the equivalent of 'getent passwd'. I'll add that, thanks. Sorry for the trouble, and thanks for your time! Thanks for debugging this. -- Guido -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500847: [cython] Does not accept Unicode docstrings
On Thu, Oct 2, 2008 at 1:28 AM, P M [EMAIL PROTECTED] wrote: Package: cython Version: 0.9.8-1 Severity: normal Cython does not accept Unicode docstrings in .pyx files. I have attached a sample session with a .pyx file, where I define a function with a docstring containing Greek characters. The file's contents are in UTF-8. What is more, instead of an error message, I got a python traceback! This problem does not show up with comments in Unicode or other string literals. $ cat bug.pyx def hello(): '''Γειά σου, κόσμε!''' print 'Hello, world!' $ cython bug.pyx Traceback (most recent call last): File /usr/bin/cython, line 8, in module main(command_line = 1) File /var/lib/python-support/python2.5/Cython/Compiler/Main.py, line 527, in main result = compile(sources, options) File /var/lib/python-support/python2.5/Cython/Compiler/Main.py, line 505, in compile return compile_multiple(source, options) File /var/lib/python-support/python2.5/Cython/Compiler/Main.py, line 472, in compile_multiple result = context.compile(source, options) File /var/lib/python-support/python2.5/Cython/Compiler/Main.py, line 327, in compile tree.process_implementation(scope, options, result) File /var/lib/python-support/python2.5/Cython/Compiler/ModuleNode.py, line 59, in process_implementation self.generate_c_code(env, options, result) File /var/lib/python-support/python2.5/Cython/Compiler/ModuleNode.py, line 243, in generate_c_code self.body.generate_function_definitions(env, code, options.transforms) File /var/lib/python-support/python2.5/Cython/Compiler/Nodes.py, line 839, in generate_function_definitions with_pymethdef = env.is_py_class_scope) File /var/lib/python-support/python2.5/Cython/Compiler/Nodes.py, line 1442, in generate_function_header self.entry.doc)) File /var/lib/python-support/python2.5/Cython/Compiler/Code.py, line 52, in putln self.put(code) File /var/lib/python-support/python2.5/Cython/Compiler/Code.py, line 69, in put self._write(code) UnicodeEncodeError: 'ascii' codec can't encode characters in position 38-41: ordinal not in range(128) $ Thank you for your time. Thanks, I reported it upstream. Ondrej
Bug#458048: glipper: Sometimes crashes on session startup
Reading this thread on the Ubuntu forum http://ubuntu-virginia.ubuntuforums.org/showthread.php?p=5804704 I've found a solution for this bug.Just add these two lines in /usr/lib/glipper/glipper # comments import time time.sleep(x) Where x is an integer greater then 5. Best regards, A. -- de Palo Andrea -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500830: Misc packaging fixes
clone 500830 -1 reassign -1 dh-ocaml thanks On Wed, Oct 01, 2008 at 10:13:06PM +0200, Loïc Minier wrote: * Don't overwrite DEB_DH_GENCONTROL_ARGS and use -u instead of -- to pass args to dpkg-gencontrol in a safer manner. This one applies also to the ocaml.mk CDBS class itself, cloning the bug to dh-ocaml to remember this. -- Stefano Zacchiroli -*- PhD in Computer Science \ PostDoc @ Univ. Paris 7 [EMAIL PROTECTED],pps.jussieu.fr,debian.org} -- http://upsilon.cc/zack/ I'm still an SGML person,this newfangled /\ All one has to do is hit the XML stuff is so ... simplistic -- Manoj \/ right keys at the right time signature.asc Description: Digital signature
Bug#500794: uswsusp - s2ram does not follow kernel
severity 500794 whishlist tags 500794 +willnotfix thanks First of all, if you know what command-line arguments you need to suspend you can use those with --force. If you use hal (via gnome-power-manager) you can create a .fdi file that will by-pass the white-list. Bastian Blank schreef: On Wed, Oct 01, 2008 at 07:54:54PM +0200, Sven Joachim wrote: But it does not know whether the machine will come up again, and even if that's the case, the screen may remain blank forever. Such is the case on my desktop. :-( Each kernel driver is allowed to veto suspension. The video card in a machine and its driver is of course of great influence on the ability of the machine to supsend and resume, but the not the only factor. There is also for example the BIOS. There's little point in suspending a machine that won't resume correctly afterwards. Do you have a number which amount of machines have problems? The number of machines that didn't came up by itself always used to be much bigger than the number that did. I must confess that I'm not following that number that well at the moment. Also there are some maior changes in very new kernels (.27 ?) that will change that number dramatically. The reasoning always was: better safe than sorry. Let users first figure out what is safe consciously, before trying to suspend without knowing resume will succeed (and risking data-loss). grts Tim -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500847: [Python-apps-team] Bug#500847: [cython] Does not accept Unicode docstrings
[P M, 2008-10-02 01:34] $ cat bug.pyx def hello(): '''Γειά σου, κόσμε!''' print 'Hello, world!' there's a missing: # -*- coding: utf-8 -*- but it doesn't work with this line either -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#441637: Pending since september 2007
Le lundi 14 avril 2008 01:59:28 Mark A. Hershberger, vous avez écrit : I've done what I need to do; the package is in pkg-php's svn repository: http://svn.debian.org/wsvn/pkg-php/pear/php-mdb2/?rev=0sc=0 I'll ping the php maintainers and see if I can't get a DD to upload it. Hi... What is the status of this bug ? As simple user, I'd really appreciate a packaging of php-mdb2, which depreciates the actual php-db. Regards, Didier -- Didier Raboud, proud Debian user. CH-1802 Corseaux [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part.
Bug#500870: upgrading at fails
Package: at Version: 3.1.10.2 Severity: normal When trying to upgrade from 3.1.10.1 it fails at configuration time : Paramétrage de at (3.1.10.2) ... Starting deferred execution scheduler: atdinvoke-rc.d: initscript atd, action start failed. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (700, 'unstable'), (700, 'testing'), (550, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26.5 (SMP w/1 CPU core; PREEMPT) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages at depends on: ii exim4 4.69-9 metapackage to ease Exim MTA (v4) ii exim4-daemon-light [mail-tran 4.69-9 lightweight Exim MTA (v4) daemon ii libc6 2.7-13 GNU C Library: Shared libraries ii libpam0g 1.0.1-4+b1 Pluggable Authentication Modules l ii lsb-base 3.2-20 Linux Standard Base 3.2 init scrip at recommends no packages. at suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#358965: bash: please include a PROMPT_COMMAND for screen
I'm unable to see this working. How is this supposed to work? You probably should use: screen*) PROMPT_COMMAND='echo -n -e \033k\033\0134' ;; See https://savannah.gnu.org/bugs/?24133#comment0. Or screen*) PROMPT_COMMAND='echo -ne \033k\033\\' ;; See https://bugs.launchpad.net/ubuntu/+bug/188938. AFAIK the screen PROMPT_COMMAND case in .bashrc is dependent upon the following being in your .screenrc: # Set the title to the name of the running program shelltitle $ |bash See the TITLES (naming windows) section in the screen man page. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#497022: solved
Hi. The problem could be solved. The internal cache of ccache was screwed up, deleting it fixed this issue. Regards, Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500871: schroot: Revisiting bug#427047: followup implementation question
Package: schroot Version: 1.2.1-1 Severity: minor Hi! I finally came back to using schroot, and was delighted to find the feature I proposed some time ago fully implemented. I have a documentation/example question though. Everywhere in the documentation and in the default fstab file you assert that The format of this file is the same as for /etc/fstab, documented in fstab(5). However in my initial proposal I dropped the 5th and 6th field, namely fs_freq and fs_passno. Is there a reason to maintain those without mentioning that their values are ignored? Or are the values in fact interpreted in some way? Thank you Peter -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397632: gpart does not work on amd64
Hi, the current version does not work on amd64. There are at least two problems. 1) check for endianity you should put into gpart.h something like #include endian.h #if defined(__BYTE_ORDER) (__BYTE_ORDER == __BIG_ENDIAN) ... #elif defined(__BYTE_ORDER) (__BYTE_ORDER == __LITTLE_ENDIAN) ... #else #error unknown endian #endif 2) there is used long type inside structures coming directly from disk at least in dos_part_entry, p_start and p_size should be uint32_t Petr -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500778: libnss-ldapd: groups resolve to nogroup after boot
Hi, On Wed, Oct 01, 2008 at 10:27:04PM +0200, Arthur de Jong wrote: Can you produce logs of nslcd? It should report whether the LDAP server was reachable or not. If you can run nslcd with the -d option it should report more information that will help in tracking this down. attached is a log, while the problem exists. [EMAIL PROTECTED] ~ % ls -l test -rw-rw-r-- 1 schoenfeld nogroup 0 12. Sep 09:49 test Interesting enough: The symptom is similar to the system behaviour, if nslcd is _not_ running. Then all files resolve to nobody:nogroup. However there is no problem visible from the log. Best Regards, Patrick nslcd: DEBUG: add_uri(ldap://majestix-linux.intra.in-medias-res.com) nslcd: version 0.6.5 starting nslcd: DEBUG: setgroups(0,NULL) done nslcd: DEBUG: setgid(121) done nslcd: DEBUG: setuid(117) done nslcd: accepting connections nslcd: [8b4567] DEBUG: connection from pid=3187 uid=30010 gid=1 nslcd: [8b4567] DEBUG: nslcd_passwd_byuid(30010) nslcd: [8b4567] DEBUG: myldap_search(base=dc=intra,dc=in-medias-res,dc=com, filter=((objectClass=posixAccount)(uidNumber=30010))) nslcd: [8b4567] DEBUG: simple anonymous bind to ldap://majestix-linux.intra.in-medias-res.com nslcd: [8b4567] connected to LDAP server ldap://majestix-linux.intra.in-medias-res.com nslcd: [8b4567] DEBUG: ldap_result(): end of results nslcd: [7b23c6] DEBUG: connection from pid=3188 uid=0 gid=1 nslcd: [7b23c6] DEBUG: nslcd_passwd_byuid(30010) nslcd: [7b23c6] DEBUG: myldap_search(base=dc=intra,dc=in-medias-res,dc=com, filter=((objectClass=posixAccount)(uidNumber=30010))) nslcd: [7b23c6] DEBUG: simple anonymous bind to ldap://majestix-linux.intra.in-medias-res.com nslcd: [7b23c6] connected to LDAP server ldap://majestix-linux.intra.in-medias-res.com nslcd: [7b23c6] DEBUG: ldap_result(): end of results nslcd: [3c9869] DEBUG: connection from pid=3188 uid=0 gid=1 nslcd: [3c9869] DEBUG: nslcd_group_bymember(root) nslcd: [3c9869] DEBUG: myldap_search(base=dc=intra,dc=in-medias-res,dc=com, filter=((objectClass=posixAccount)(uid=root))) nslcd: [3c9869] DEBUG: simple anonymous bind to ldap://majestix-linux.intra.in-medias-res.com nslcd: [3c9869] connected to LDAP server ldap://majestix-linux.intra.in-medias-res.com nslcd: [3c9869] DEBUG: ldap_result(): end of results nslcd: [3c9869] DEBUG: myldap_search(base=dc=intra,dc=in-medias-res,dc=com, filter=((objectClass=posixGroup)(memberUid=root))) nslcd: [3c9869] DEBUG: ldap_result(): end of results nslcd: [334873] DEBUG: connection from pid=3188 uid=0 gid=0 nslcd: [334873] DEBUG: nslcd_group_byname(Operations) nslcd: [334873] DEBUG: myldap_search(base=dc=intra,dc=in-medias-res,dc=com, filter=((objectClass=posixGroup)(cn=Operations))) nslcd: [334873] DEBUG: simple anonymous bind to ldap://majestix-linux.intra.in-medias-res.com nslcd: [334873] connected to LDAP server ldap://majestix-linux.intra.in-medias-res.com nslcd: [334873] DEBUG: ldap_result(): end of results nslcd: [b0dc51] DEBUG: connection from pid=3194 uid=0 gid=0 nslcd: [b0dc51] DEBUG: nslcd_group_bymember(root) nslcd: [b0dc51] DEBUG: myldap_search(base=dc=intra,dc=in-medias-res,dc=com, filter=((objectClass=posixAccount)(uid=root))) nslcd: [b0dc51] DEBUG: simple anonymous bind to ldap://majestix-linux.intra.in-medias-res.com nslcd: [b0dc51] connected to LDAP server ldap://majestix-linux.intra.in-medias-res.com nslcd: [b0dc51] DEBUG: ldap_result(): end of results nslcd: [b0dc51] DEBUG: myldap_search(base=dc=intra,dc=in-medias-res,dc=com, filter=((objectClass=posixGroup)(memberUid=root))) nslcd: [b0dc51] DEBUG: ldap_result(): end of results nslcd: [495cff] DEBUG: connection from pid=3203 uid=0 gid=0 nslcd: [495cff] DEBUG: nslcd_passwd_byuid(30010) nslcd: [495cff] DEBUG: myldap_search(base=dc=intra,dc=in-medias-res,dc=com, filter=((objectClass=posixAccount)(uidNumber=30010))) nslcd: [495cff] DEBUG: ldap_result(): end of results nslcd: [e8944a] DEBUG: connection from pid=3203 uid=0 gid=0 nslcd: [e8944a] DEBUG: nslcd_group_bygid(1000) nslcd: [e8944a] DEBUG: myldap_search(base=dc=intra,dc=in-medias-res,dc=com, filter=((objectClass=posixGroup)(gidNumber=1000))) nslcd: [e8944a] DEBUG: ldap_result(): end of results nslcd: [5558ec] DEBUG: connection from pid=3203 uid=0 gid=0 nslcd: [5558ec] DEBUG: nslcd_passwd_byuid(-2) nslcd: [5558ec] DEBUG: myldap_search(base=dc=intra,dc=in-medias-res,dc=com, filter=((objectClass=posixAccount)(uidNumber=-2))) nslcd: [5558ec] DEBUG: ldap_result(): end of results nslcd: [8e1f29] DEBUG: connection from pid=3203 uid=0 gid=0 nslcd: [8e1f29] DEBUG: nslcd_group_bygid(-2) nslcd: [8e1f29] DEBUG: myldap_search(base=dc=intra,dc=in-medias-res,dc=com, filter=((objectClass=posixGroup)(gidNumber=-2))) nslcd: [8e1f29] DEBUG: ldap_result(): end of results nslcd: [e87ccd] DEBUG: connection from pid=3204 uid=0 gid=0 nslcd: [e87ccd] DEBUG: nslcd_passwd_byname(schoenfeld) nslcd: [e87ccd] DEBUG: myldap_search(base=dc=intra,dc=in-medias-res,dc=com, filter=((objectClass=posixAccount)(uid=schoenfeld)))
Bug#500872: python-openturns: Missing r-rot package
Package: python-openturns Version: 0.12.1-4 Severity: important Openturns features which require R are not available. This is because the r-rot package is missing. The source code of the r-rot package is available in the openturns archive/repository in th e utils/rotRPackage/ directory. With r-rot package installed the following script should no longer return an error: $ python Python 2.5.2 (r252:60911, Aug 8 2008, 09:22:44) [GCC 4.3.1] on linux2 Type help, copyright, credits or license for more information. from openturns import * print FittingTest.Kolmogorov(Normal().getNumericalSample(10),DistributionFactory(NormalFactory())) *** Log Beginning *** Warning: using Kolmogorov test for a distribution with estimated parameters will result in an overestimated pValue DBG - Searching in directory : /home/jerome/openturns/etc DBG - Searching in directory : /etc/openturns Using configuration file /etc/openturns/openturns.conf Error in library(rotRPackage) : there is no package called 'rotRPackage' Execution halted DBG - ExceptionNames ctor DBG - ExceptionNames registration of destructor = OK DBG - InternalException emited at FittingTest.cxx:307 (in RunRTest): Error: unable to execute the system command /usr/bin/R --no-save --silent /tmp/RCmd.R.UDuDNh 21 /dev/null returned c ode is 256 terminate called after throwing an instance of 'OpenTURNS::Base::Common::UserException1, OpenTURNS::Base::Common::Exception' what(): Error: unable to execute the system command /usr/bin/R --no-save --silent /tmp/RCmd.R.UDuDNh 21 /dev/null returned code is 256 Abandon -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (900, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/4 CPU cores) Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Shell: /bin/sh linked to /bin/bash Versions of packages python-openturns depends on: ii libc6 2.7-13 GNU C Library: Shared libraries ii libgcc1 1:4.3.1-9 GCC support library ii libopenturns0 0.12.1-4 dynamic libraries for OpenTURNS ii libstdc++64.3.1-9The GNU Standard C++ Library v3 ii python-qt33.17.4-1 Qt3 bindings for Python python-openturns recommends no packages. python-openturns suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500837: libsane's udev rules not recognised
Dave Page [EMAIL PROTECTED] wrote: Hi, I had to manually restart udev to get it to read the rules file; after that (and unplugging and replugging the scanner) the permissions were correct and everything was fine. Actually, udev watches for changes to the rules files (and for additions/deletions) and reloads them on the fly. libsane should do this for you when it is installed so installation is more transparent. Triggering a coldplug is not recommended AFAIK. JB. -- Julien BLACHE - Debian GNU/Linux Developer - [EMAIL PROTECTED] Public key available on http://www.jblache.org - KeyID: F5D6 5169 GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#413892: closed by Jordi Mallach [EMAIL PROTECTED] (Bug#413892: fixed in alsa-oss 1.0.17-1)
Subject: alsa-oss: sda Package: alsa-oss Version: 1.0.17-1 Severity: normal On Mon, Sep 29, 2008 at 09:30:04AM +, Debian Bug Tracking System wrote: * Using festival with aoss leads to a segfault. This is just no more reproducible. Tested on amd64, i386, ppc. Hopefully fixed (closes: #413892) Hi. Sorry, but I can still reproduce this problem. The output of strace is attached. Please tell me how to provide more information (related debug symbols for debugging with gdb etc.). Regards, Alex -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (950, 'unstable'), (850, 'testing'), (750, 'stable'), (600, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages alsa-oss depends on: ii libasound21.0.16-2 ALSA library ii libc6 2.7-13 GNU C Library: Shared libraries alsa-oss recommends no packages. alsa-oss suggests no packages. -- debconf-show failed strace.gz Description: Binary data
Bug#500873: blosxom: XSS problem in the error flavour
Package: blosxom Version: 2.1.1-1 Severity: critical Tags: security Hi! Yoshinori Ohta of Business Architects Inc. found a XSS issue in blosxom related to handling of unknown flavour types. The fix is now commited to upstream CVS: http://blosxom.cvs.sourceforge.net/viewvc/blosxom/blosxom2/blosxom.cgi?r1=1.83r2=1.84 The upstream version is expected to get released today, the issue has been granted the CVE id CVE-2008-2236. So long, Rhonda -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500875: vim-addon-manager does not respect source-dir option
Package: vim-addon-manager Version: 0.4 Severity: normal I'm developing a debian package that uses vim-addon-manager (Searching for a mentor by the way[1]). Now I'd like to switch between the dpkg installed version of my script and the trunk version I'm developing. I try vim-addons -r /var/checkouts/vim-debugger-dbgp/debian \ -s /var/checkouts/vim-debugger-dbgp install debugger-dbgp But vim-addons still symlinks to /usr/share... instead of /var/checkouts... I hope I understood the source-dir option well. If not, please add a little more details to the man page. [1] http://mentors.debian.net/debian/pool/main/v/vim-debugger-dbgp/ -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages vim-addon-manager depends on: ii ruby 4.2An interpreter of object-oriented ii vim-common1:7.1.314-3+b1 Vi IMproved - Common files Versions of packages vim-addon-manager recommends: ii vim-gtk [vim] 1:7.1.314-3+b1 Vi IMproved - enhanced vi editor - ii vim-tiny 1:7.1.314-3+b1 Vi IMproved - enhanced vi editor - vim-addon-manager suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500874: python-openturns: Should recommend python-rpy
Package: python-openturns Version: 0.12.1-4 Severity: normal python-openturns should recommend python-rpy. Here is an example of script which will fail if it's not installed: $ python Python 2.5.2 (r252:60911, Aug 8 2008, 09:22:44) [GCC 4.3.1] on linux2 Type help, copyright, credits or license for more information. from openturns import * Show(Normal().drawPDF()) Error in Show type 'exceptions.NotImplementedError' Wrong number of arguments for overloaded function 'new_Drawable'. Possible C/C++ prototypes are: OpenTURNS::Base::Graph::Drawable() OpenTURNS::Base::Graph::Drawable(OpenTURNS::Base::Graph::DrawableImplementation const ,OpenTURNS::String const ) OpenTURNS::Base::Graph::Drawable(OpenTURNS::Base::Graph::DrawableImplementation const ) OpenTURNS::Base::Graph::Drawable(OpenTURNS::Base::Graph::Drawable const ) -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (900, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/4 CPU cores) Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Shell: /bin/sh linked to /bin/bash Versions of packages python-openturns depends on: ii libc6 2.7-13 GNU C Library: Shared libraries ii libgcc1 1:4.3.1-9 GCC support library ii libopenturns0 0.12.1-4 dynamic libraries for OpenTURNS ii libstdc++64.3.1-9The GNU Standard C++ Library v3 ii python-qt33.17.4-1 Qt3 bindings for Python python-openturns recommends no packages. python-openturns suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500872: [Pkg-scicomp-devel] Bug#500872: python-openturns: Missing r-rot package
Jerome, thanks for the report, where is r-rot exactely ? I cannot find it either in Debian or the openturns tarball 0.12.1 Best regards C. On Thu, Oct 2, 2008 at 10:32 AM, Jerome Robert [EMAIL PROTECTED]wrote: Package: python-openturns Version: 0.12.1-4 Severity: important Openturns features which require R are not available. This is because the r-rot package is missing. The source code of the r-rot package is available in the openturns archive/repository in th e utils/rotRPackage/ directory. With r-rot package installed the following script should no longer return an error: $ python Python 2.5.2 (r252:60911, Aug 8 2008, 09:22:44) [GCC 4.3.1] on linux2 Type help, copyright, credits or license for more information. from openturns import * print FittingTest.Kolmogorov(Normal().getNumericalSample(10),DistributionFactory(NormalFactory())) *** Log Beginning *** Warning: using Kolmogorov test for a distribution with estimated parameters will result in an overestimated pValue DBG - Searching in directory : /home/jerome/openturns/etc DBG - Searching in directory : /etc/openturns Using configuration file /etc/openturns/openturns.conf Error in library(rotRPackage) : there is no package called 'rotRPackage' Execution halted DBG - ExceptionNames ctor DBG - ExceptionNames registration of destructor = OK DBG - InternalException emited at FittingTest.cxx:307 (in RunRTest): Error: unable to execute the system command /usr/bin/R --no-save --silent /tmp/RCmd.R.UDuDNh 21 /dev/null returned c ode is 256 terminate called after throwing an instance of 'OpenTURNS::Base::Common::UserException1, OpenTURNS::Base::Common::Exception' what(): Error: unable to execute the system command /usr/bin/R --no-save --silent /tmp/RCmd.R.UDuDNh 21 /dev/null returned code is 256 Abandon -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (900, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/4 CPU cores) Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Shell: /bin/sh linked to /bin/bash Versions of packages python-openturns depends on: ii libc6 2.7-13 GNU C Library: Shared libraries ii libgcc1 1:4.3.1-9 GCC support library ii libopenturns0 0.12.1-4 dynamic libraries for OpenTURNS ii libstdc++64.3.1-9The GNU Standard C++ Library v3 ii python-qt33.17.4-1 Qt3 bindings for Python python-openturns recommends no packages. python-openturns suggests no packages. -- no debconf information ___ Pkg-scicomp-devel mailing list [EMAIL PROTECTED] http://lists.alioth.debian.org/mailman/listinfo/pkg-scicomp-devel
Bug#500873: blosxom: XSS problem in the error flavour
On Thu, October 2, 2008 10:43, Gerfried Fuchs wrote: Yoshinori Ohta of Business Architects Inc. found a XSS issue in blosxom related to handling of unknown flavour types. The fix is now commited to upstream CVS: http://blosxom.cvs.sourceforge.net/viewvc/blosxom/blosxom2/blosxom.cgi?r 1=1.83r2=1.84 Does blosxom have some kind of valuable information stored in cookies? As far as I understand it one manipulates the blog postings out-of-band? cheers, Thijs -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500876: linux-image-2.6.26-1-openvz-amd64: Booting on SMP server fails
Package: linux-image-2.6.26-1-openvz-amd64
Version: 2.6.26-5
Severity: important
On a Dell PowerEdge 1955 (two Quad Core CPUs), the kernel fails on boot
with the regular boot parameters. With the nosmp boot option or
maxcpus=4, the whole thing works fine. With maxcpus=8 or just no
special command, the kernel fails on boot.
On a second, identical system, I also installed the 2.6.26-1-amd64
kernel but _without_ OpenVZ support. This one is running fine.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-openvz-amd64 (Debian 2.6.26-5) ([EMAIL PROTECTED]) (gcc
version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep 10
16:30:00 UTC 2008
** Command line:
root=/dev/sda1 ro quiet maxcpus=4
** Not tainted
** Kernel log:
[1.348352] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.5 (April
29, 2008)
[1.348352] ACPI: PCI Interrupt :02:00.0[A] - GSI 16 (level, low) -
IRQ 16
[1.362299] SCSI subsystem initialized
[1.386360] USB Universal Host Controller Interface driver v3.0
[1.386360] ACPI: PCI Interrupt :00:1d.0[A] - GSI 21 (level, low) -
IRQ 21
[1.386360] PCI: Setting latency timer of device :00:1d.0 to 64
[1.386360] uhci_hcd :00:1d.0: UHCI Host Controller
[1.386360] uhci_hcd :00:1d.0: new USB bus registered, assigned bus
number 1
[1.386360] uhci_hcd :00:1d.0: irq 21, io base 0xcce0
[1.386360] usb usb1: configuration #1 chosen from 1 choice
[1.386360] hub 1-0:1.0: USB hub found
[1.386360] hub 1-0:1.0: 2 ports detected
[1.386360] Fusion MPT base driver 3.04.06
[1.386360] Copyright (c) 1999-2007 LSI Corporation
[1.390360] Fusion MPT SAS Host driver 3.04.06
[1.489320] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[1.489325] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[1.489328] usb usb1: Product: UHCI Host Controller
[1.489330] usb usb1: Manufacturer: Linux 2.6.26-1-openvz-amd64 uhci_hcd
[1.489332] usb usb1: SerialNumber: :00:1d.0
[1.492136] ACPI: PCI Interrupt :00:1d.1[B] - GSI 20 (level, low) -
IRQ 20
[1.492136] PCI: Setting latency timer of device :00:1d.1 to 64
[1.492136] uhci_hcd :00:1d.1: UHCI Host Controller
[1.492136] uhci_hcd :00:1d.1: new USB bus registered, assigned bus
number 2
[1.492136] uhci_hcd :00:1d.1: irq 20, io base 0xccc0
[1.492136] usb usb2: configuration #1 chosen from 1 choice
[1.492136] hub 2-0:1.0: USB hub found
[1.492136] hub 2-0:1.0: 2 ports detected
[1.595006] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[1.595010] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[1.595013] usb usb2: Product: UHCI Host Controller
[1.595016] usb usb2: Manufacturer: Linux 2.6.26-1-openvz-amd64 uhci_hcd
[1.595019] usb usb2: SerialNumber: :00:1d.1
[1.886607] firmware: requesting bnx2-06-4.0.5.fw
[1.890482] eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X
64-bit 133MHz found at mem f800, IRQ 16, node addr 00:19:b9:f5:54:ab
[1.892144] ACPI: PCI Interrupt :00:1d.7[A] - GSI 21 (level, low) -
IRQ 21
[1.892144] PCI: Setting latency timer of device :00:1d.7 to 64
[1.892144] ACPI: PCI Interrupt :06:00.0[A] - GSI 16 (level, low) -
IRQ 16
[1.892144] ehci_hcd :00:1d.7: EHCI Host Controller
[1.892144] ehci_hcd :00:1d.7: new USB bus registered, assigned bus
number 3
[1.896170] ehci_hcd :00:1d.7: debug port 1
[1.896170] PCI: cache line size of 32 is not supported by device
:00:1d.7
[1.896170] ehci_hcd :00:1d.7: irq 21, io mem 0xfc60
[1.912106] ehci_hcd :00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[1.912151] usb usb3: configuration #1 chosen from 1 choice
[1.912151] hub 3-0:1.0: USB hub found
[1.912151] hub 3-0:1.0: 4 ports detected
[2.016135] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[2.016135] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[2.016135] usb usb3: Product: EHCI Host Controller
[2.016135] usb usb3: Manufacturer: Linux 2.6.26-1-openvz-amd64 ehci_hcd
[2.016135] usb usb3: SerialNumber: :00:1d.7
[2.384425] firmware: requesting bnx2-06-4.0.5.fw
[2.396386] eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X
64-bit 133MHz found at mem f400, IRQ 16, node addr 00:19:b9:f5:54:ad
[2.400388] ACPI: PCI Interrupt :0e:08.0[A] - GSI 192 (level, low) -
IRQ 192
[2.400388] mptbase: ioc0: Initiating bringup
[3.173862] ioc0: LSISAS1068 B0: Capabilities={Initiator}
[3.173905] mptbase: ioc0: PCI-MSI enabled
[4.962384] scsi0 : ioc0: LSISAS1068 B0, FwRev=000a3100h, Ports=1, MaxQ=286,
IRQ=1270
[5.979699] scsi 0:0:0:0: Direct-Access SEAGATE ST973451SS SM04
PQ: 0 ANSI: 5
[5.995618] scsi 0:0:1:0: Direct-Access SEAGATE ST973451SS SM04
PQ: 0 ANSI: 5
[6.006364] scsi
Bug#500210: perldoc perlrun spits out junk in synopsis
Niko Tyni [EMAIL PROTECTED] writes: Thanks, we're on the same page then. I'll revert the perldoc change. Does this documentation patch for lenny look OK to you? Yup, this looks good to me. (I suppose it should be duplicated in pod2man.PL too.) Yes. -- Russ Allbery ([EMAIL PROTECTED]) http://www.eyrie.org/~eagle/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500872: [Pkg-scicomp-devel] Bug#500872: python-openturns: Missing r-rot package
Right, I did not notice that it was not in the tarball. It's only available on the subversion repository: https://trac.openturns.org/tags/openturns-0.12.1/utils/rotRPackage/ I've reported this upstream: http://trac.openturns.org/ticket/143 Regards, Jerome On Thu, 2 Oct 2008 10:46:14 +0200, Christophe Prud'homme [EMAIL PROTECTED] wrote: Jerome, thanks for the report, where is r-rot exactely ? I cannot find it either in Debian or the openturns tarball 0.12.1 Best regards C. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500878: README.Debian refers to non-existent /usr/share/doc/libplib-doc
Package: plib-doc Version: 1:1.8.4-3 Severity: minor e.g. If you want to try some of the examples, you should copy all of them into a separate directory (eg. /tmp/plib-doc): $ mkdir /tmp/plib-doc $ cd /tmp/plib-doc $ cp -a /usr/share/doc/libplib-doc/examples ./src $ cp -a /usr/share/doc/libplib-doc/configuration/* . ^^ should be 'plib-doc' -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash plib-doc depends on no packages. plib-doc recommends no packages. Versions of packages plib-doc suggests: ii autoconf 2.61-8 automatic configure script builder ii automake 1:1.10.1-3 A tool for generating GNU Standard ii g++ 4:4.3.1-2 The GNU C++ compiler pn libxi-dev none (no description available) pn libxmu-devnone (no description available) ii plib1.8.4-dev 1.8.4-10 Portability Libraries: Development -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500795: Etch SPARC install fails to sync monitor.
On Wednesday 01 October 2008, Donald Pellegrino wrote: Please let me know if you have any suggestions for keeping the installer from changing graphic modes or for specifying the appropriate monitor frequency to the installer. The installer does not really do anything. The problem is more likely to be in the kernel. One option you can try is 'fb=false', but that is unlikely to work. You have a better chance of success by trying to explicitly set the video mode for the framebuffer driver your graphics controller uses. That would be 'video=fb driver:settings', or maybe 'fb driver.option=value'. You'll have to check the kernel's Documentation/fb directory and possibly google around a bit for the correct settings. Cheers, FJP -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500880: mail-notification: Segmentation fault with systray icon
Package: mail-notification Version: 5.4.dfsg.1-1 Severity: important mail-notification use eggtray to handle systray icon, which is utterly bugged. Restarting the system tray manager make m-n segfault with the following backtrace: (gdb) bt #0 XGrabServer (dpy=0x0) at ../../src/GrServer.c:38 #1 0x0042be88 in egg_tray_icon_update_manager_window () #2 0x0042bfcb in egg_tray_icon_manager_filter () #3 0x7f28c60bf757 in gdk_event_apply_filters (xevent=0x7fffd172e250, event=0x1e48ab0, filters=0x1ed36c0) at /home/jdanjou/tmp/gtk+2.0-2.12.11/gdk/x11/gdkevents-x11.c:345 #4 0x7f28c60c04db in gdk_event_translate (display=0x1dbe000, event=0x1e48ab0, xevent=0x7fffd172e250, return_exposes=0) at /home/jdanjou/tmp/gtk+2.0-2.12.11/gdk/x11/gdkevents-x11.c:896 #5 0x7f28c60c3178 in _gdk_events_queue (display=0x1dbe000) at /home/jdanjou/tmp/gtk+2.0-2.12.11/gdk/x11/gdkevents-x11.c:2285 #6 0x7f28c60c334e in gdk_event_dispatch (source=0x1dc9040, callback=0, user_data=0x0) at /home/jdanjou/tmp/gtk+2.0-2.12.11/gdk/x11/gdkevents-x11.c:2345 #7 0x7f28c4a5678b in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0 #8 0x7f28c4a59f5d in ?? () from /usr/lib/libglib-2.0.so.0 #9 0x7f28c4a5a48d in g_main_loop_run () from /usr/lib/libglib-2.0.so.0 #10 0x7f28c66cc5c4 in IA__gtk_main () at /home/jdanjou/tmp/gtk+2.0-2.12.11/gtk/gtkmain.c:1163 #11 0x0042e5a0 in main () I suggest to fix eggtray or, better, use GTK system tray which probably work better. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages mail-notification depends on: ii gconf2 2.22.0-1 GNOME configuration database syste ii gnome-icon-theme 2.22.0-1 GNOME Desktop icon theme ii libart-2.0-2 2.3.20-2 Library of functions for 2D graphi ii libatk1.0-01.22.0-1 The ATK accessibility toolkit ii libbonobo2-0 2.22.0-1 Bonobo CORBA interfaces library ii libbonoboui2-0 2.22.0-1 The Bonobo UI library ii libc6 2.7-13GNU C Library: Shared libraries ii libcairo2 1.6.4-6 The Cairo 2D vector graphics libra ii libdbus-1-31.2.1-3 simple interprocess messaging syst ii libdbus-glib-1-2 0.76-1simple interprocess messaging syst ii libgconf2-42.22.0-1 GNOME configuration database syste ii libglade2-01:2.6.2-1 library to load .glade files at ru ii libglib2.0-0 2.16.6-1 The GLib library of C routines ii libgmime-2.0-2a2.2.22-2 MIME library ii libgnome-keyring0 2.22.3-2 GNOME keyring services library ii libgnome2-02.20.1.1-1The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.20.1.1-1A powerful object-oriented display ii libgnomeui-0 2.20.1.1-2The GNOME 2 libraries (User Interf ii libgnomevfs2-0 1:2.22.0-5GNOME Virtual File System (runtime ii libgnomevfs2-extra 1:2.22.0-5GNOME Virtual File System (extra m ii libgtk2.0-02.12.11-3 The GTK+ graphical user interface ii libice62:1.0.4-1 X11 Inter-Client Exchange library ii libnotify1 [libnotify1 0.4.4-3 sends desktop notifications to a n ii liborbit2 1:2.14.13-0.1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.20.5-2 Layout and rendering of internatio ii libpopt0 1.14-4lib for parsing cmdline parameters ii libsasl2-2 2.1.22.dfsg1-23 Cyrus SASL - authentication abstra ii libsm6 2:1.0.3-2 X11 Session Management library ii libx11-6 2:1.1.5-2 X11 client-side library ii libxml22.6.32.dfsg-4 GNOME XML library ii notification-daemon0.3.7-1+b1a daemon that displays passive pop ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime mail-notification recommends no packages. Versions of packages mail-notification suggests: pn fetchyahoonone (no description available) pn getlive none (no description available) pn mail-notification-evolution none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500879: gnome-keyring-manager: asks for confirmation once per saved wireless password
Package: gnome-keyring-manager Version: 2.20.0-1 Severity: minor When I opened gnome-keyring-manager to look at the passphrase for a particular wireless network, I got one dialog per saved wireless passphrase. Paraphrased: Do you want to allow Keyring Manager access to the password for /foo/bar/baz? [Deny] [Allow Once] [Always Allow] I had to bounce on the stream of dialogs' Always Allow button about 30 times before I could use the keyring manager, given that I have quite a few wireless passphrases stored. It strikes me that the keyring manager should be able to get blanket access to all passwords stored in a keyring, given a single confirmation, since its intention is to manage those passwords! :-) -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (900, 'testing'), (800, 'unstable'), (700, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages gnome-keyring-manager depends on: ii gconf22.22.0-1 GNOME configuration database syste ii libc6 2.7-13 GNU C Library: Shared libraries ii libgconf2-4 2.22.0-1 GNOME configuration database syste ii libglade2-0 1:2.6.2-1 library to load .glade files at ru ii libglib2.0-0 2.16.5-1 The GLib library of C routines ii libgnome-keyring0 2.22.3-1 GNOME keyring services library ii libgnome2-0 2.20.1.1-1 The GNOME 2 library - runtime file ii libgnomeui-0 2.20.1.1-1 The GNOME 2 libraries (User Interf ii libgtk2.0-0 2.12.11-3 The GTK+ graphical user interface Versions of packages gnome-keyring-manager recommends: ii gnome-icon-theme 2.22.0-1 GNOME Desktop icon theme gnome-keyring-manager suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#370650: rabbit disappears
Hi, this bugs seems to be gone in the newest upstream version 1.51 of jumpnbump which I plan to package for debian unstable. In any case this is a bug of jumpnbump and not of jumpnbump-levels as you already said. Greetings, Kilian. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500729: inetutils-inetd: Daemon fails to start/doesn't install proplerly
tags 500729 patch
thanks
Hello!
On Tue, Sep 30, 2008 at 09:51:41PM +0200, I wrote:
$ sudo /etc/init.d/inetutils-inetd start
grep: /etc/inetd.conf: No such file or directory
Not starting internet superserver: no services enabled. (warning).
Attached is a patch
Shouldn't installing this create a `/etc/inetd.conf' file, at least for
inetd's internal services?
Regards,
Thomas
--- inetutils-inetd 2008-08-20 12:31:17.0 +0200
+++ /etc/init.d/inetutils-inetd 2008-10-02 10:22:19.118878000 +0200
@@ -23,10 +23,10 @@
check_no_services()
{
- if ! grep -q ^[0-9A-Za-z/] /etc/inetd.conf; then
-log_warning_msg Not starting internet superserver: no services enabled.
-exit 0
- fi
+ grep -q ^[0-9A-Za-z/] /etc/inetd.conf 2 /dev/null return 0
+ ( cd /etc/inetd.d/ set * [ x$1 != x\* ] ) return 0
+ log_warning_msg Not starting internet superserver: no services enabled.
+ exit 0
}
signature.asc
Description: Digital signature
Bug#483070: [Pkg-xfce-devel] Bug#483070: re : here's a patch from upstream
On Thu, Oct 02, 2008 at 06:28:14AM +0200, Jérémy Lal wrote: bad patch, now the screen saver stays black. I've opened an upstream bug where you may want to comment. See http://bugzilla.xfce.org/show_bug.cgi?id=4435. Cheers, -- Yves-Alexis -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500873: blosxom: XSS problem in the error flavour
* Thijs Kinkhorst [EMAIL PROTECTED] [2008-10-02 10:53:54 CEST]: On Thu, October 2, 2008 10:43, Gerfried Fuchs wrote: Yoshinori Ohta of Business Architects Inc. found a XSS issue in blosxom related to handling of unknown flavour types. The fix is now commited to upstream CVS: http://blosxom.cvs.sourceforge.net/viewvc/blosxom/blosxom2/blosxom.cgi?r 1=1.83r2=1.84 Does blosxom have some kind of valuable information stored in cookies? As far as I understand it one manipulates the blog postings out-of-band? Not in itself, but it might be the case in connection with some plugin extensions that enable comments or web editing (none of them are shipped in Debian). I'm sorry to have wrongly put it as medium into the security tracker in the first place which was clearly wrong. I guess even low might be too high of an option, but we finally figured out a way that it's possible to inject a / into the output that enables it to inject arbitrary data. So long, Rhonda -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#499236: aspell-ru: does not recognise flexional word forms any longer
On Fri, Sep 26, 2008 at 1:58 AM, Martin-Éric Racine [EMAIL PROTECTED] wrote: On Thu, Sep 25, 2008 at 10:51 PM, Johannes Rohr [EMAIL PROTECTED] wrote: As a test, could you check documents that you normally work on with Gedit using e.g. Nano or VI in a terminal with irussian? If proof reading works with irussian, then we'll know that the problem is with the tools used to generate myspell-ru (which would also affect aspell-ru). [...] So, something about the build process must be broken. Yes, myspell-tools was broken. A fixed version has been uploaded, but this now means that all packages who Build-Depend on myspell-tools must be rebuilt via bin-NMU. This is a process that requires the intervention of release managers. Now that the fixed myspell-tools has been uploaded, we're re-building rus-ispell to produce fresh myspell-ru and aspell-ru packages. They should be available in unstable/sid sometimes during the next couple of days. Johannes, can you please let us know later during the weekend, after the update has been pushed to all Debian mirrors, if this improved the situation? -- Martin-Éric Racine http://q-funk.iki.fi
Bug#500873: blosxom: XSS problem in the error flavour
severity 500873 important thanks On Thu, October 2, 2008 11:25, Gerfried Fuchs wrote: Not in itself, but it might be the case in connection with some plugin extensions that enable comments or web editing (none of them are shipped in Debian). I'm sorry to have wrongly put it as medium into the security tracker in the first place which was clearly wrong. I guess even low might be too high of an option, but we finally figured out a way that it's possible to inject a / into the output that enables it to inject arbitrary data. Of course fixing it in Lenny is very preferable but I think in this case the severity should be 'important'. Adjusting as such. Thijs -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500833: libghc6-xmonad-contrib-dev: build with utf8 support
Hi, Am Donnerstag, den 02.10.2008, 01:04 +0400 schrieb Dmitry Kurochkin: On Thu, Oct 2, 2008 at 12:53 AM, Joachim Breitner [EMAIL PROTECTED] wrote: Am Donnerstag, den 02.10.2008, 00:50 +0400 schrieb Dmitry Kurochkin: On Thu, Oct 2, 2008 at 12:47 AM, Joachim Breitner [EMAIL PROTECTED] wrote: Am Donnerstag, den 02.10.2008, 00:21 +0400 schrieb Dmitry Kurochkin: Try this: 1. touch ~/тест 2. 'ls ~' shows file 'тест' correctly 3. mod-p to launch prompt 4. type '~/' It shows all files in $HOME and file 'тест' is shown incorrect. If it does not help, I can test it on my (amd64) machine. sorry for the trouble, I found out that I had a different compilation of xmonad-contrib installed, with the --utf8 flag. I’ll do an upload to Debian soon. Greetings, Joachim -- Joachim nomeata Breitner Debian Developer [EMAIL PROTECTED] | ICQ# 74513189 | GPG-Keyid: 4743206C JID: [EMAIL PROTECTED] | http://people.debian.org/~nomeata signature.asc Description: Dies ist ein digital signierter Nachrichtenteil
Bug#500877: tightvncserver: Tries to create logfile in /usr/adm/
Package: tightvncserver
Version: 1.3.9-4
Severity: normal
Hi,
Xtightvnc (the server) tries to write log messages into
/usr/adm/X{DISPLAY}msgs, then falls back to /dev/null.
(See the ADMPATH macro in osinit.c and its Imakefile)
May I suggest to use /var/log/ directory.
Regards.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages tightvncserver depends on:
ii libc6 2.7-13GNU C Library: Shared libraries
ii libjpeg62 6b-14 The Independent JPEG Group's JPEG
ii libx11-6 2:1.1.5-1 X11 client-side library
ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar
ii perl 5.10.0-14 Larry Wall's Practical Extraction
ii x11-common 1:7.3+17 X Window System (X.Org) infrastruc
ii xbase-clients 1:7.3+17 miscellaneous X clients - metapack
ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime
Versions of packages tightvncserver recommends:
ii xfonts-base 1:1.0.0-5 standard fonts for X
Versions of packages tightvncserver suggests:
ii tightvnc-java 1.2.7-6TightVNC java applet and command l
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#499774: starttls is a joke
[EMAIL PROTECTED] (Arnaud Ebalard) writes: This software does not have any authentication capabilities: it does not allow you to authenticate your peer, which is a basic requirement for TLS/SSL to be used securely. You should only use it for testing purposes and not relaying important information. Be aware that you are vulnerable to MITM when using it That seems correct to me. Note that even if you use gnutls-cli, you need to configure it to use appropriate trust anchors to get full security. ^ I hope you mean a working setup. If you do not provide it any (set of) trust anchor, it should not be able to verify server's certificate and should fail, shouldn't it? Right, and that's what I meant with you need to configure it to use appropriate trust anchors. If you do that, you should get full security (whatever that means). /Simon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#481916: MMA 1.4 packaged for Debian
Hi, I completely agree and have done an update, which can be found at http://willem.engen.nl/debian/ . Please see the source package over there. I hope that the package in Debian can be updated. A note for users: note that the author of MMA has made a Debian package available at his website http://www.mellowood.ca/mma/ Note that bug #341684 is about the same thing. Regards, - Willem -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500872: [Pkg-scicomp-devel] Bug#500872: python-openturns: Missing r-rot package
Jerome, I am not sure yet what I will do, I think I will put rot-r in the patch system quilt for 0.12.1 and hopefully the next release will incorporate rot-r is python-openturns unusable without rot-r ? I am not (yet) familiar with openturns, sorry if I ask trivial questions Best regards C. On Thu, Oct 2, 2008 at 11:00 AM, Jerome Robert [EMAIL PROTECTED]wrote: Right, I did not notice that it was not in the tarball. It's only available on the subversion repository: https://trac.openturns.org/tags/openturns-0.12.1/utils/rotRPackage/ I've reported this upstream: http://trac.openturns.org/ticket/143 Regards, Jerome On Thu, 2 Oct 2008 10:46:14 +0200, Christophe Prud'homme [EMAIL PROTECTED] wrote: Jerome, thanks for the report, where is r-rot exactely ? I cannot find it either in Debian or the openturns tarball 0.12.1 Best regards C.
Bug#491234:
forwarded 491234 http://bugzilla.gnome.org/show_bug.cgi?id=554680 thanks Forwarded upstream. Thanks for the report. -- Claudio Saavedra [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500881: crystalcursors: bad priority for x-cursor-theme alternatives
Package: crystalcursors Version: 1.1.1-10 Severity: normal The default x-cursor-theme alternative priority for all cursors is 50, causing the actually selected alternative to be semi-random (depending on the file name?). In my current setup it caused a left-handed cursor to become default, confusing the users. There should be one suggested theme with higher priority than the rest. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-xeno (SMP w/2 CPU cores) Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500882: Please package version 2.7.2
Package: dkim-filter Version: 2.6.0.dfsg-1 Severity: Wishlist Hello, Version 2.7.2 of the package is available from http://sourceforge.net/project/showfiles.php?group_id=139420package_id=153279 I'd appreciate a debian package of it. Bye, Joerg -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#499081: More information
reassign 499081 pulseaudio 0.9.10-3 thanks Le jeudi 02 octobre 2008 à 11:01 +1000, Tim Richardson a écrit : So, I attached gdb to gnome-panel and did a bt (invoked as gdb gnome-panel 3826) (gdb) bt #0 0xb7fa5424 in __kernel_vsyscall () #1 0xb75d6093 in __read_nocancel () from /lib/i686/cmov/libpthread.so.0 #2 0xb722386e in esd_sample_play () from /usr/lib/libesd.so.0 #3 0xb7e7e814 in ?? () from /usr/lib/libgnome-2.so.0 #4 0x0010 in ?? () #5 0x0004 in ?? () #6 0xbfabfae8 in ?? () #7 0xb7e89578 in ?? () from /usr/lib/libgnome-2.so.0 #8 0x092f11b0 in ?? () #9 0x08ffa5b8 in ?? () #10 0xbfabfac8 in ?? () #11 0xb7e7e96f in gnome_triggers_vdo () from /usr/lib/libgnome-2.so.0 Backtrace stopped: frame did not save the PC 6) after stopping gdm, the following processes were still active for my user, TTY ? gconfd-2 Pulseaudio Gconf-helper Gnome-panel Bonobo-activation-server Gnome-terminal Gnome-pty-helper Killing bonobo-activation-server did not allow me to login again. However, killing pulseaudio did fix it. So, perhaps not a gnome-panel bug. Thanks a lot for your analysis. This looks indeed like a bug in the EsounD emulation of PulseAudio. You can probably work around it easily if you simply disable sound events, which seem to trigger the issue. Cheers, -- .''`. : :' : We are debian.org. Lower your prices, surrender your code. `. `' We will add your hardware and software distinctiveness to `-our own. Resistance is futile. signature.asc Description: Ceci est une partie de message numériquement signée
Bug#500883: dmraid: boot fails after upgrading to 1.0.0.rc14-4
Package: dmraid
Version: 1.0.0.rc14-4
Severity: critical
Justification: breaks the whole system
I upgraded dmraid from an earlier version, I don't know which one, but it was
from the pre-udev startup.
After the upgrade the boot stops at waiting for the root filesystem. I get a
busybox prompt. I figured out what to type to continue booting up:
$ modprobe dm-mirror
$ dmraid -ay
$ exit
Then I found bug 499060, message #45 which might solve my problem. So I have
added
the first 2 missing modprobe lines to /etc/.../85_dmraid.rules file which looks
like
this now:
# ...
RUN+=/sbin/modprobe dm-mod
RUN+=/sbin/modprobe dm-mirror
SUBSYSTEM==block, ACTION==add|change, ENV{ID_TYPE}==disk,
ENV{ID_FS_USAGE}==raid, KERNEL==hd[a-z]|sd[a-z], \
RUN+=/sbin/dmraid-activate %k
After recreating initramfs, and rebooting, I still get the busybox prompt. But
now
I don't have to type modprobe dm-mirror anymore, simply executing dmraid -ay
works, it creates the devices under /dev/mapper/ and boot goes on. So the
problem
is partly solved.
At the moment I have no more time to debug this further. Why dmraid is not
executed
automatically? Any idea?
Thanks,
Peter
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages dmraid depends on:
ii libc62.7-13 GNU C Library: Shared libraries
ii libdevmapper1.02.1 2:1.02.27-3 The Linux Kernel Device Mapper use
ii libselinux1 2.0.65-5SELinux shared libraries
ii libsepol12.0.30-2Security Enhanced Linux policy lib
ii udev 0.125-7 /dev/ and hotplug management daemo
dmraid recommends no packages.
dmraid suggests no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#476813: jumpnbump
Hi, the new upstream version of jumpnbump compiles without *any* modifications under debian. Greetings, Kilian. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500877: tightvncserver: Tries to create logfile in /usr/adm/
Christophe Lohr a écrit :
Package: tightvncserver
Version: 1.3.9-4
Severity: normal
Hi,
Xtightvnc (the server) tries to write log messages into
/usr/adm/X{DISPLAY}msgs, then falls back to /dev/null.
(See the ADMPATH macro in osinit.c and its Imakefile)
Note that this log file is used when the -inetd mode is activated.
May I suggest to use /var/log/ directory.
Since writing in this directory requires root privileges, users may
prefer another location (via a command line option or an environment
variable)
Regards.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages tightvncserver depends on:
ii libc6 2.7-13GNU C Library: Shared libraries
ii libjpeg62 6b-14 The Independent JPEG Group's JPEG
ii libx11-6 2:1.1.5-1 X11 client-side library
ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar
ii perl 5.10.0-14 Larry Wall's Practical Extraction
ii x11-common 1:7.3+17 X Window System (X.Org) infrastruc
ii xbase-clients 1:7.3+17 miscellaneous X clients - metapack
ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime
Versions of packages tightvncserver recommends:
ii xfonts-base 1:1.0.0-5 standard fonts for X
Versions of packages tightvncserver suggests:
ii tightvnc-java 1.2.7-6TightVNC java applet and command l
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#427263: Shouldn't this bug be closed?
Why is this bug still marked as outstanding? mvrgr, Wouter -- :wq mail [EMAIL PROTECTED] web http://uwstopia.nl tell myself that i'm not ready yet :: i want to live -- heather nova signature.asc Description: Digital signature
Bug#500884: New upstream version 0.8.10
Package: muine Hi, There's a new upstream version 0.8.10 that fixes various bugs, adds a few features and no longer causes Muine to use excessive battery power on laptops. mvrgr, Wouter -- :wq mail [EMAIL PROTECTED] web http://uwstopia.nl we are one :: but torn apart :: will you still wait for me -- blind guardian signature.asc Description: Digital signature
Bug#500885: apache2-mpm-itk: too tied to apache2.2-common
Package: apache2-mpm-itk Version: 2.2.6-02-1 Severity: wishlist Hello, each update of apache2 leads to update of apache2-mpm-itk. Each security upload of apache2 during lenny lifetime have to be followed by binNMU of apache2-mpm-itk. Is this really needed ? Petr -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#395401: GSSAPI Working ok here
FWIW, SMTP SASL authentication works fine here with Evolution 2.22 (server runs Dovecot). Cheers, Jelmer -- Jelmer Vernooij [EMAIL PROTECTED] - http://samba.org/~jelmer/ Jabber: [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500883: dmraid: boot fails after upgrading to 1.0.0.rc14-4
tags 500883 moreinfo thanks Peter Leipold ha scritto: After the upgrade the boot stops at waiting for the root filesystem. I get a busybox prompt. I figured out what to type to continue booting up: $ modprobe dm-mirror $ dmraid -ay $ exit I need some debug logs. Extract the attached .tar.gz, and you have a dmraid-debug directory cd dmraid-debug cp -a sbin/* /sbin/ cp -a 85_dmraid.rules /etc/udev/rules.d/ cat dmraid.initramfs-hook/dmraid /usr/share/initramfs-tools/hooks/dmraid update-initramfs -u -k 2.6.26-1-686 Reboot, and you will get /dev/dmraid.log and /dev/dmraid-activate.log Giuseppe. dmraid-debug.tar.gz Description: GNU Zip compressed data signature.asc Description: OpenPGP digital signature
Bug#500885: apache2-mpm-itk: too tied to apache2.2-common
On Thu, Oct 02, 2008 at 01:13:06PM +0200, Petr Salinger wrote: each update of apache2 leads to update of apache2-mpm-itk. Each security upload of apache2 during lenny lifetime have to be followed by binNMU of apache2-mpm-itk. Is this really needed ? As long as MPMs are not dynamically loadable -- yes, it is, every time Apache code changes. /* Steinar */ -- Homepage: http://www.sesse.net/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500888: linux-image-2.6.26-1-vserver-amd64: cannot specify lo as non 127.0.0.1 in vserver guests
Package: linux-image-2.6.26-1-vserver-amd64 Version: 2.6.26-6 Severity: important Each of my vserver guests has a separate loopback interface. This is specified as normal in /etc/vserver/$guest/interfaces/. For example, I have: .../1/dev is lo .../1/ip is 127.32.0.1 .../1/prefix is 8 Under 2.6.22-3-vserver-amd64 (and earlier), this all worked fine. Under 2.6.26-1-vserver-amd64 this does not work: every vserver guest is started with lo as 127.0.0.1, thus breaking the internal network badly. -- Package-specific info: -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.22-3-vserver-amd64 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-vserver-amd64 depends on: ii debconf [debconf-2.0] 1.5.23 Debian configuration management sy ii initramfs-tools [linux-initra 0.92l tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.26-1-vserver-amd64 recommends: ii util-vserver0.30.216~r2772-2 user-space tools for Linux-VServer Versions of packages linux-image-2.6.26-1-vserver-amd64 suggests: ii grub 0.97-47GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 none (no description available) -- debconf information: linux-image-2.6.26-1-vserver-amd64/postinst/old-system-map-link-2.6.26-1-vserver-amd64: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-1-vserver-amd64/postinst/bootloader-error-2.6.26-1-vserver-amd64: linux-image-2.6.26-1-vserver-amd64/prerm/removing-running-kernel-2.6.26-1-vserver-amd64: true linux-image-2.6.26-1-vserver-amd64/preinst/abort-overwrite-2.6.26-1-vserver-amd64: linux-image-2.6.26-1-vserver-amd64/preinst/abort-install-2.6.26-1-vserver-amd64: linux-image-2.6.26-1-vserver-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.26-1-vserver-amd64/postinst/create-kimage-link-2.6.26-1-vserver-amd64: true linux-image-2.6.26-1-vserver-amd64/preinst/failed-to-move-modules-2.6.26-1-vserver-amd64: linux-image-2.6.26-1-vserver-amd64/preinst/initrd-2.6.26-1-vserver-amd64: linux-image-2.6.26-1-vserver-amd64/postinst/kimage-is-a-directory: linux-image-2.6.26-1-vserver-amd64/postinst/depmod-error-2.6.26-1-vserver-amd64: false linux-image-2.6.26-1-vserver-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-vserver-amd64: true linux-image-2.6.26-1-vserver-amd64/postinst/old-initrd-link-2.6.26-1-vserver-amd64: true linux-image-2.6.26-1-vserver-amd64/preinst/elilo-initrd-2.6.26-1-vserver-amd64: true linux-image-2.6.26-1-vserver-amd64/postinst/bootloader-test-error-2.6.26-1-vserver-amd64: linux-image-2.6.26-1-vserver-amd64/postinst/depmod-error-initrd-2.6.26-1-vserver-amd64: false linux-image-2.6.26-1-vserver-amd64/preinst/overwriting-modules-2.6.26-1-vserver-amd64: true linux-image-2.6.26-1-vserver-amd64/preinst/bootloader-initrd-2.6.26-1-vserver-amd64: true linux-image-2.6.26-1-vserver-amd64/preinst/lilo-initrd-2.6.26-1-vserver-amd64: true linux-image-2.6.26-1-vserver-amd64/postinst/old-dir-initrd-link-2.6.26-1-vserver-amd64: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#496718: vpnc: Disconnects after an hour: me too
I also have the same problem, feel free to ask for details. My log is almost the same as already posted one. vpnc = 0.5.1r334-1 My config: IPSec ID XXX IPSec gateway 111.111.111.111 IPSec secret XXX Xauth username XXX Xauth password XXX IKE Authmode psk Target networks 10.10.0.0/16 DNSUpdate no Thank you for your work! -- Alexandra N. Kossovsky OKTET Labs (http://www.oktetlabs.ru/) Phones: +7(921)956-42-86(mobile) +7(812)783-21-91(office) e-mail: [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500890: libnss-pgsql2: Wrong SQL querys in nss-pgsql.conf
Package: libnss-pgsql2 Version: 1.4.0debian-2 Severity: important Tags: patch Dear maintainers, I run into some problems with the nss-pgsql.conf file comming in this package which does not work for me out of the box. After creating all needed tables and putting the exampe config in place doing a getnet group results in the following errors in the postgres log: 2008-10-02 13:12:17 CEST FEHLER: Spalte »username« existiert nicht bei Zeichen 105 2008-10-02 13:12:17 CEST ANWEISUNG: DECLARE nss_pgsql_internal_allgroups_curs SCROLL CURSOR FOR SELECT groupname, passwd, gid, ARRAY(SELECT username FROM usergroups WHERE usergroups.gid = group_table.gid) AS members FROM group_table FOR READ ONLY 2008-10-02 13:12:17 CEST FEHLER: aktuelle Transaktion wurde abgebrochen, Befehle werden bis zum Ende der Transaktion ignoriert 2008-10-02 13:12:17 CEST ANWEISUNG: FETCH FROM nss_pgsql_internal_allgroups_curs After tweaking the SQL querys a bit getent passwd and getent groups works for me again. Patch for this is available Regards, Torsten -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages libnss-pgsql2 depends on: ii libc6 2.7-13 GNU C Library: Shared libraries ii libpq58.3.3-1PostgreSQL C client library libnss-pgsql2 recommends no packages. Versions of packages libnss-pgsql2 suggests: ii libpam-pgsql 0.6.3-2PAM module to authenticate using a pn nscd none (no description available) -- no debconf information --- nss-pgsql.conf.org 2007-11-13 02:03:16.0 +0100 +++ nss-pgsql.conf 2008-10-02 13:14:57.0 +0200 @@ -11,9 +11,9 @@ # All users allusers= SELECT username, passwd, gecos, homedir, shell, uid, gid FROM passwd_table # Must return group_name, group_passwd, group_gid -getgrnam= SELECT groupname, passwd, gid, ARRAY(SELECT username FROM usergroups WHERE usergroups.gid = group_table.gid) AS members FROM group_table WHERE groupname = $1 +getgrnam= SELECT groupname, passwd, gid, ARRAY(SELECT username FROM passwd_table WHERE passwd_table.gid = group_table.gid) AS members FROM group_table WHERE groupname = $1 # Must return group_name, group_passwd, group_gid -getgrgid= SELECT groupname, passwd, gid, ARRAY(SELECT username FROM usergroups WHERE usergroups.gid = group_table.gid) AS members FROM group_table WHERE gid = $1 +getgrgid= SELECT groupname, passwd, gid, ARRAY(SELECT username FROM passwd_table WHERE passwd_table.gid = group_table.gid) AS members FROM group_table WHERE gid = $1 # Must return gid. %s MUST appear first for username match in where clause -groups_dyn = SELECT ug.gid FROM passwd_table JOIN usergroups USING (uid) where username = $1 and ug.gid $2 -allgroups = SELECT groupname, passwd, gid, ARRAY(SELECT username FROM usergroups WHERE usergroups.gid = group_table.gid) AS members FROM group_table +groups_dyn = SELECT ug.gid FROM passwd_table JOIN usergroups ug USING (uid) where username = $1 and ug.gid $2 +allgroups = SELECT groupname, passwd, gid, ARRAY(SELECT username FROM passwd_table pt JOIN usergroups ug ON ug.uid = pt.uid WHERE ug.gid = gt.gid ) AS members FROM group_table gt
Bug#500889: chg-manual: Keeps asking for new tapes instead of using any
Package: amanda-server
Version: 1:2.5.2p1-4
Severity: normal
File: chg-manual
When using runtapes 1 and chg-manual amcheck and amdump don't accept the
current tape but instead keep asking for new tapes. This appears to be because
amanda wants, after processing the tapes, to go back to the first one but
chg-manual doesn't go backwards and acts like a 99 tape changer. The solution
is to have chg-manual tell amanda it is a gravity stacker.
# Pretend we're a gravity stacker
backward=0
info() {
echo - rewind $tape $logfile
$MT $MTF $tape rewind $logfile 21
echo - status $tape $logfile
used=`$MT $MTF $tape status 21 | tee -a $logfile | $EGREP
$ONLINEREGEX`
echo - loaded $used $logfile
if [ -z $used ];then
answer=0 $lastslot $backward
else
answer=$slot $lastslot $backward
fi
echo Exit - $answer $logfile
echo $answer
exit 0
}
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages amanda-server depends on:
ii amanda-common 1:2.5.2p1-4 Advanced Maryland Automatic Networ
ii bsd-mailx [mailx] 8.1.2-0.20071201cvs-3 A simple mail user agent
ii libc6 2.7-13GNU C Library: Shared libraries
ii libncurses55.6+20080830-1shared libraries for terminal hand
ii libreadline5 5.2-3 GNU readline and history libraries
amanda-server recommends no packages.
Versions of packages amanda-server suggests:
ii amanda-client1:2.5.2p1-4 Advanced Maryland Automatic Networ
ii cpio 2.9-13 GNU cpio -- a program to manage ar
pn gnuplot none (no description available)
ii mt-st1.1-2 Linux SCSI tape driver aware magne
ii perl [perl5] 5.10.0-14 Larry Wall's Practical Extraction
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500886: gvfs-fuse depends on fuse-utils
Package: gvfs-fuse It seems to me that gvfs-fuse depends on fuse-utils to work, but there is no dependency. mvrgr, Wouter -- :wq mail [EMAIL PROTECTED] web http://uwstopia.nl why do black flies just live for one day?-- green lizard signature.asc Description: Digital signature
Bug#500891: nginx: Need -dbg package
Package: nginx Version: 0.5.35-2 Severity: wishlist Currently nginx is built with --with-debug. That is unneeded in many cases, and often floods logs with needless messages. What about creating nginx-dbg with debugging on, and removing the debug option for the main nginx package? -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.18-53.el5.028stab051.1 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages nginx depends on: ii libc6 2.7-13GNU C Library: Shared libraries ii libpcre3 7.6-2.1 Perl 5 Compatible Regular Expressi ii libssl0.9.80.9.8g-13 SSL shared libraries ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime nginx recommends no packages. nginx suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500872: [Pkg-scicomp-devel] Bug#500872: python-openturns: Missing r-rot package
It is not unusable but many (if not all) of the statistical functions used for tests, fittings and so on are the one developed in R. No realistic studies can be performed without such features. All what can be done in openturns without r-rot are trivial things suitable for small demos. Regards, Jerome and Jayant On Thu, 2 Oct 2008 12:08:03 +0200, Christophe Prud'homme [EMAIL PROTECTED] wrote: Jerome, I am not sure yet what I will do, I think I will put rot-r in the patch system quilt for 0.12.1 and hopefully the next release will incorporate rot-r is python-openturns unusable without rot-r ? I am not (yet) familiar with openturns, sorry if I ask trivial questions Best regards C. On Thu, Oct 2, 2008 at 11:00 AM, Jerome Robert [EMAIL PROTECTED]wrote: Right, I did not notice that it was not in the tarball. It's only available on the subversion repository: https://trac.openturns.org/tags/openturns-0.12.1/utils/rotRPackage/ I've reported this upstream: http://trac.openturns.org/ticket/143 Regards, Jerome On Thu, 2 Oct 2008 10:46:14 +0200, Christophe Prud'homme [EMAIL PROTECTED] wrote: Jerome, thanks for the report, where is r-rot exactely ? I cannot find it either in Debian or the openturns tarball 0.12.1 Best regards C. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500892: plib-doc: README.Debian references package's 'Recommends' field but there aren't any
Package: plib-doc Version: 1:1.8.4-3 Severity: minor Make sure you have installed the packages recommended by the plib-doc package. The plib-doc package has no Recommends:. I suspect they were changed to Suggests: at some point in the past and the docs not updated. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash plib-doc depends on no packages. plib-doc recommends no packages. Versions of packages plib-doc suggests: ii autoconf 2.61-8 automatic configure script builder ii automake 1:1.10.1-3 A tool for generating GNU Standard ii g++ 4:4.3.1-2 The GNU C++ compiler pn libxi-dev none (no description available) pn libxmu-devnone (no description available) ii plib1.8.4-dev 1.8.4-10 Portability Libraries: Development -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#247337: Periodic Account Update
Dear Xs4all Subscriber, To complete your Xs4all account, you must reply to this email Immediately and enter your Username: (*) Password: (*) Failure to do this will immediately render your email address deactivated from our database. We apologize for the inconvenience that this will cause you during this period, but trust you understand that our primary concern is for our customers and for the security of their data. our customers are totally secure Regards Xs4all Support Team -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500887: xserver-xorg: Unpredictable X server crash when Gnome screen saver (lock screen) run
On Thu, Oct 2, 2008 at 21:12:17 +1000, Jason White wrote: On several occasions now, upon running the Gnome screen saver or the lock screen menu option, the X server has crashed. My only recourse has been to log in over ssh from another system and reboot the machine. As this system has an nVidia video card installed, and I have chosen not to install the non-free nVidia driver, the X server should be using the nv driver. The automatically generated xorg.conf file is included below. The following segfault is reported in the kernel log. Oct 2 20:06:11 jdc kernel: [59619.632360] Xorg[18999]: segfault at 61 ip 7f60a837f18f sp 7fffc77fd610 error 4 in libgcc_s.so.1[7f60a836f000+16000] Hi, can you send an Xorg log from the crash (should be in /var/log/Xorg.0.log.old after reboot), or even better try to log in remotely before the crash, attach gdb to the X server process, and catch a full backtrace when it segfaults (make sure xserver-xorg-core-dbg is installed for that). Thanks, Julien -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500887: xserver-xorg: Unpredictable X server crash when Gnome screen saver (lock screen) run
On Thu, Oct 02, 2008 at 01:45:45PM +0200, Julien Cristau wrote: can you send an Xorg log from the crash (should be in /var/log/Xorg.0.log.old after reboot), or even better try to log in remotely before the crash, attach gdb to the X server process, and catch a full backtrace when it segfaults (make sure xserver-xorg-core-dbg is installed for that). I can do the former now (see the attached log file). I'll install the debugging package and attempt gdb tomorrow, assuming that I can reproduce the problem. Regards, Jason. Xorg.0.log.old Description: application/trash
Bug#500830: Misc packaging fixes
I prepared these additional changes as well: * Set DEB_MAKE_CHECK_TARGET to check || true to not fail the build if the testsuite doesn't pass; NB: it does seem to pass currently. * Use Vcs-* headers instead of XS-Vcs-*. * Bump up Standards-Version to 3.8.0. Test suite can be run and cause the build to fail if it fails by removing the || true which might be what one wants. I am attaching the watch file. -- Loïc Minier version=3 http://www.recherche.enac.fr/opti/facile/distrib/ \ facile-([\d.]+).tar.gz
Bug#500894: linux-image-2.6.26-1-amd64: Broadcom (b43) wireless driver broken
Package: linux-image-2.6.26-1-amd64 Severity: important HP6720 laptop, amd64. % lspci -vvn|grep 43 -A7 10:00.0 0280: 14e4:4311 (rev 02) Subsystem: 103c:1375 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at e400 (64-bit, non-prefetchable) [size=16K] Capabilities: access denied Kernel driver in use: b43-pci-bridge Kernel modules: ssb % dmesg [ 239.793947] wlan1: Configured IBSS beacon template [ 239.793947] phy0: Adding new IBSS station 00:0e:2e:5c:c7:75 (dev=wlan1) [ 239.894593] __ratelimit: 48 messages suppressed [ 239.901010] wlan1: beacon TSF higher than local TSF - IBSS merge with BSSID 06:b7:18:13:2a:72 [ 239.901101] wlan1: Configured IBSS beacon template [ 239.901117] phy0: Adding new IBSS station 00:0e:2e:5c:c7:75 (dev=wlan1) [ 269.919612] wlan1: expiring inactive STA 00:0e:2e:5c:c7:75 [ 269.928563] wlan1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 300.855343] wlan1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) As you can see I get an enormous amount of messages (50/s) and after a minute or two connection (ad-hoc, WEP) dies. It works fine with 2.6.25. Regards, Vedran -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (900, 'unstable'), (800, 'experimental'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=hr_HR.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.23 Debian configuration management sy ii initramfs-tools [linux-initra 0.92l tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-1-amd64 recommends no packages. Versions of packages linux-image-2.6.26-1-amd64 suggests: ii lilo 1:22.8-6 LInux LOader - The Classic OS load ii linux-doc-2.6.26 2.6.26-6 Linux kernel specific documentatio -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500893: please build against heimdal to allow for pkinit
Package: libpam-krb5 Version: 3.11-2 Severity: wishlist Hi, MIT doesn't support pkinit atm, so I'd be great if you could build against heimdal or are there other features we'd miss out on then? Cheers, -- Guido -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500888: linux-image-2.6.26-1-vserver-amd64: cannot specify lo as non 127.0.0.1 in vserver guests
Hi, On Thursday 02 October 2008 13:14, Matthew Sackman wrote: Under 2.6.22-3-vserver-amd64 (and earlier), this all worked fine. Under 2.6.26-1-vserver-amd64 this does not work: every vserver guest is started with lo as 127.0.0.1, thus breaking the internal network badly. Ain't that a feature? (Or can you access the others 127.0.0.1s from the other vservers? regards, Holger pgpyrh9tHECiA.pgp Description: PGP signature
Bug#498366: intent to NMU
Hi,
I'm uploading a 0-day NMU to fix this bug.
debdiff attached and archived on:
http://people.debian.org/~nion/nmu-diff/ssmtp-2.62-1_2.62-1.1.patch
Cheers
Nico
--
Nico Golde - http://www.ngolde.de - [EMAIL PROTECTED] - GPG: 0x73647CFF
For security reasons, all text in this mail is double-rot13 encrypted.
diff -u ssmtp-2.62/debian/patches/series ssmtp-2.62/debian/patches/series
--- ssmtp-2.62/debian/patches/series
+++ ssmtp-2.62/debian/patches/series
@@ -1 +1,2 @@
+02-CVE-2008-3962
01-374327-use-gnutls.patch
diff -u ssmtp-2.62/debian/changelog ssmtp-2.62/debian/changelog
--- ssmtp-2.62/debian/changelog
+++ ssmtp-2.62/debian/changelog
@@ -1,3 +1,11 @@
+ssmtp (2.62-1.1) unstable; urgency=high
+
+ * Non-maintainer upload by the Security Team.
+ * Fix possible information disclosure in corner cases (no gecos)
+by adding a missing else branch (02-CVE-2008-3962; Closes: #498366).
+
+ -- Nico Golde [EMAIL PROTECTED] Thu, 02 Oct 2008 14:15:57 +0200
+
ssmtp (2.62-1) unstable; urgency=low
* New upstream version
only in patch2:
unchanged:
--- ssmtp-2.62.orig/debian/patches/02-CVE-2008-3962
+++ ssmtp-2.62/debian/patches/02-CVE-2008-3962
@@ -0,0 +1,16 @@
+Index: ssmtp-2.62/ssmtp.c
+===
+--- ssmtp-2.62.orig/ssmtp.c 2008-10-02 14:15:39.0 +0200
ssmtp-2.62/ssmtp.c 2008-10-02 14:15:41.0 +0200
+@@ -485,6 +485,11 @@
+ die(from_format() -- snprintf() failed);
+ }
+ }
++ else {
++ if(snprintf(buf, BUF_SZ, %s, str) == -1) {
++die(from_format() -- snprintf() failed);
++ }
++ }
+ }
+
+ #if 0
pgpePcGAQyxMp.pgp
Description: PGP signature
Bug#500858: [lazarus] Re : Lazarus and Linitian warnings
Package: lazarus Version: 0.9.24-0-13 --- Please enter the report below this line. --- Most of the Linitian errors will disappear with new upcoming version 0.9.26. --- System information. --- Architecture: i386 Kernel: Linux 2.6.26-1-686 Debian Release: lenny/sid 500 unstableftp.fr.debian.org --- Package information. --- Depends (Version) | Installed ==-+-=== lazarus-ide| 0.9.26-0 lazarus-src| 0.9.26-0 lazarus-doc| 0.9.26-0 signature.asc Description: Ceci est une partie de message numériquement signée
Bug#500895: xbase-clients: xon missing
Package: xbase-clients Version: 1:7.3+17 Severity: normal Can't find the ingenius xon program although I know it was included in older versions of xbase-clients or xutils. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages xbase-clients depends on: ii x11-apps 7.3+3 X applications ii x11-session-utils 7.3+1 X session utilities ii x11-utils 7.3+2 X11 utilities ii x11-xfs-utils 7.3+1 X font server utilities ii x11-xkb-utils 7.4+1 X11 XKB utilities ii x11-xserver-utils 7.3+5 X server utilities ii xauth 1:1.0.3-2 X authentication utility ii xinit 1.0.9-2X server initialisation tool xbase-clients recommends no packages. xbase-clients suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#433996: severity of 433996 is grave
# Automatically generated email from bts, devscripts version 2.10.35 # security bug severity 433996 grave -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500883: dmraid: boot fails after upgrading to 1.0.0.rc14-4
Hi Giuseppe,
I've done it, but the log files are not there. Looks like udev does not call
this activate script at all.
The block devices do exist, I've seen these in busybox:
brw-rw 1 root disk 8, 0 2008-10-02 15:54 /dev/sda
brw-rw 1 root disk 8, 1 2008-10-02 15:54 /dev/sda1
brw-rw 1 root disk 8, 2 2008-10-02 15:54 /dev/sda2
brw-rw 1 root disk 8, 3 2008-10-02 15:54 /dev/sda3
brw-rw 1 root disk 8, 4 2008-10-02 15:54 /dev/sda4
brw-rw 1 root disk 8, 16 2008-10-02 15:54 /dev/sdb
brw-rw 1 root disk 8, 17 2008-10-02 15:54 /dev/sdb1
brw-rw 1 root disk 8, 18 2008-10-02 15:54 /dev/sdb2
brw-rw 1 root disk 8, 19 2008-10-02 15:54 /dev/sdb3
brw-rw 1 root disk 8, 20 2008-10-02 15:54 /dev/sdb4
Also /dev/disk/... was present.
I now suspect the ENV{ID_FS_USAGE}==raid option in udev rules file. How
should udev supposed to know if a disk is raid? Maybe I should rename
something to this raid? See below my raid settings:
[EMAIL PROTECTED]:~# dmraid -r
/dev/sdb: ddf1, .ddf1_disks, GROUP, ok, 390361088 sectors, data@ 0
/dev/sda: ddf1, .ddf1_disks, GROUP, ok, 390361088 sectors, data@ 0
[EMAIL PROTECTED]:~# dmraid -s
*** Group superset .ddf1_disks
-- Active Subset
name : ddf1_system
size : 390361088
stride : 128
type : mirror
status : ok
subsets: 0
devs : 2
spares : 0
Hm, should name be here raid, instead of ddf1_system?
Thanks,
Peter
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#498920: fix for lenny
Hi Eric, can we get this bug fixed for lenny? It's a trivial typo and prevents a whole class of token to work. I can NMU if this helps. -- Guido -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#492970: #492970 - nfs-common 1:1.1.3-1 client disallows access to files/directories where it should allow access - Debian Bug report logs
On Fri, Aug 08, 2008 at 09:06:46PM -0400, Chuck Lever wrote: Confirmed. The kernel's mountd client doesn't even bother to unmarshal the auth flavor list in the server's reply. I'll work on a fix. Chuck Lever was able to confirm this bug. On Thu, Oct 02, 2008 at 01:30:54PM +0200, Rasmus Bøg Hansen wrote: Hi Steve and Aníbal Steve Dickson [EMAIL PROTECTED] writes: Rasmus Bøg Hansen wrote: Steve Dickson [EMAIL PROTECTED] writes: Hey... In the following problem: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=492970 What were the kernel versions on both the client and server? I would like to knock this out before cutting another release of nfs-utils... Phew, package manager logs fortunately tell me 'cause I didn't remember. Client: 2.6.26.3 Server: 2.6.26 Those were both home-compiled, non-patched kernels from kernel.org, not Debian kernels. Hope this helps - I will gladly send you more information if you might need anything. Ok... I am not able to reproduce this problem with the following setup: both server and client: 2.6.25-1.fc9.x86_64 and nfs-utils-1.1.3-5.fc10.x86_64 mount server:/home /mnt/home (as steved) cd /mnt/home/steved touch foo with no problem... what am I doing differently that you guys? In my case I run Debian stable (nfs-utils 1.0.10) on the server and Debian unstable (1.1.3) on the client. I have not tried upgrading the server (which is probably not an option until Debian Lenny is released), but running the client with sec=sys solves the problem for me like here: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=492970#40 There is talk about a debian specific patch that might be the culprit here: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=492970#90 When I read that message, I tried without that patch and had the same problem. I even tried without all debian patches and the bug was there. I just tried again with the same result. The mentioned patch: Index: nfs-utils-1.1.2/utils/mount/mount.c === --- nfs-utils-1.1.2.orig/utils/mount/mount.c2008-07-11 18:56:00.0 +0200 +++ nfs-utils-1.1.2/utils/mount/mount.c 2008-07-11 18:56:06.0 +0200 @@ -189,9 +189,6 @@ } if (nfs_mount_data_version NFS_MOUNT_VERSION) nfs_mount_data_version = NFS_MOUNT_VERSION; - else - if (kernel_version MAKE_VERSION(2, 6, 22)) - string++; } static void print_one(char *spec, char *node, char *type, char *opts) Regards /Rasmus -- Rasmus Bøg Hansen MSC Aps Bøgesvinget 8 2740 Skovlunde 44 53 93 66 signature.asc Description: Digital signature
Bug#499662: Proposed changes for #499662
Hi, I read in #499662 that you propose to remove /usr/lib/libcairo-directfb/lib/libcairo.so.* and only rely on the libcairo-directfb.so.* library. However I’m afraid this is going to break the GTK+ DirectFB build. Currently, it is very hackish, and relies on the availability of those files in /usr/lib/libcairo-directfb. The reason is that pangocairo can link to each of the two cairo libraries, and therefore we don’t rebuild it for the DirectFB version. Which means, if we only link gdk/gtk to libcairo-directfb, it will also bring libcairo through the pangocairo dependencies. Some symbols would be contained in both libcairo versions, which *may* work, but which opens the door to a large number of very subtle and incomprehensible bugs. A saner solution is probably to enable DirectFB support in the regular cairo build, and to ship the DirectFB-only version only in the udeb. It would add a hard dependency on libdirectfb-1.0-0 and would require some changes to the gtk+2.0 build, but would make things a lot cleaner in this sense - and that would definitely fix #499662. A variant of this is to make the libcairo2-directfb package ship a DirectFB and X-enabled library that comes as a diversion to the one in libcairo2. It avoids installation of libdirectfb-1.0-0 on all systems. I can work on patches if people agree on one of these solutions, and especially if it is accepted by the release team. It will imply changes in the pango1.0, gtk+2.0 and cdebconf builds. Cheers, -- .''`. : :' : We are debian.org. Lower your prices, surrender your code. `. `' We will add your hardware and software distinctiveness to `-our own. Resistance is futile. signature.asc Description: Ceci est une partie de message numériquement signée
Bug#500883: dmraid: boot fails after upgrading to 1.0.0.rc14-4
Hi Peter,
Peter ha scritto:
I now suspect the ENV{ID_FS_USAGE}==raid option in udev rules file. How
should udev supposed to know if a disk is raid? Maybe I should rename
something to this raid? See below my raid settings:
udevadm info --query=all --name=sda
udevadm info --query=all --name=sdb
Paste the output please.
Giuseppe.
signature.asc
Description: OpenPGP digital signature
Bug#500898: Missing version in my DDPO page
Package: qa.debian.org Severity: normal Hi. KiBi has kindly sponsored an updated package (0.0.15.1) of usbmount (which I recently adopted). The problem I have is that both my DDPO page [1] doesn't show the new version of the package, even though the DDPO page listed this version while it was in incoming and the package is already in the package mirrors [2]. The tooltip on the version of my DDPO page for this package says: unstable: (no projectb data found). I would appreciate if this were updated and, if further information is wanted, please don't hesitate to ask. Thanks, Rogério Brito. [1] http://qa.debian.org/developer.php?login=rbrito%40ime.usp.br [2] http://ftp.debian.org/debian/pool/main/u/usbmount/usbmount_0.0.15.1.dsc -- Rogério Brito : [EMAIL PROTECTED],ime.usp}.br : GPG key 1024D/7C2CAEB8 http://www.ime.usp.br/~rbrito : http://meusite.mackenzie.com.br/rbrito Projects: algorithms.berlios.de : lame.sf.net : vrms.alioth.debian.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500897: kernel-package: 'debian' target does not patch the source as advertised
Package: kernel-package Version: 11.001-0.1 Severity: minor The manual page says that the 'debian' target will optionally patch the source, but does not specify how. The most obvious way (setting patch_the_kernel to yes) does not patch the source; is the man page outdated? -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (50, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages kernel-package depends on: ii dpkg 1.14.22Debian package management system ii dpkg-dev 1.14.22Debian package development tools ii file 4.26-1 Determines file type using magic ii gcc [c-compiler] 4:4.3.2-2 The GNU C compiler ii gcc-3.4 [c-compiler] 3.4.6-8The GNU C compiler ii gcc-4.2 [c-compiler] 4.2.4-3The GNU C compiler ii gcc-4.3 [c-compiler] 4.3.2-1The GNU C compiler ii gettext 0.17-4 GNU Internationalization utilities ii make 3.81-5 The GNU version of the make util ii perl 5.10.0-15 Larry Wall's Practical Extraction ii po-debconf1.0.15 manage translated Debconf template Versions of packages kernel-package recommends: ii bzip2 1.0.5-1high-quality block-sorting file co ii libc6-dev [libc-dev] 2.7-13 GNU C Library: Development Librari Versions of packages kernel-package suggests: pn docbook-utilsnone (no description available) pn libdb3-dev none (no description available) ii libncurses5-dev [libncur 5.6+20080925-1 developer's libraries and docs for ii linux-source-2.6.22 [lin 2.6.22-6.lenny1 Linux kernel source for version 2. ii linux-source-2.6.26 [lin 2.6.26-7Linux kernel source for version 2. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500896: vim: python syntax higlighting fails on some text portions
Package: vim Version: 2:7.2.010-1 Severity: minor Hello, Sometimes when there is some huge pieces of docstrings in python files vim fails to correctly highlight some place of the text : the docstring is hightlighted as the code and vice-versa. For an example of this behavior opens core.py from the python-genshi package. It appears that it happens when you jump on a line and that the first line displayed in the terminal is part of a long docstring. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=fr_BE.UTF-8, LC_CTYPE=fr_BE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages vim depends on: ii libacl1 2.2.47-2 Access control list shared library ii libc6 2.7-13 GNU C Library: Shared libraries ii libgpm2 1.20.4-2 General Purpose Mouse - shared lib ii libncurses5 5.6+20080925-1 shared libraries for terminal hand ii libselinux1 2.0.65-5 SELinux shared libraries ii vim-common2:7.2.010-1Vi IMproved - Common files ii vim-runtime 2:7.2.010-1Vi IMproved - Runtime files vim recommends no packages. Versions of packages vim suggests: ii exuberant-ctags [ctags] 1:5.7-4build tag file indexes of source c pn vim-doc none (no description available) ii vim-scripts 20080722-1 plugins for vim, adding bells and -- no debconf information -- Nicolas Évrard | Web: http://www.openhex.com Liège - Belgique -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500899: telepathy-idle: can't register against nickserv anymore
Package: telepathy-idle Version: 0.1.2-1 Severity: normal Hi, since a few versions, empathy can't register against nickerv on freenode. It just fails, telling that the nick is already registered. Thanks, Xav -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/4 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages telepathy-idle depends on: ii libc6 2.7-13 GNU C Library: Shared libraries ii libdbus-1-3 1.2.1-3simple interprocess messaging syst ii libdbus-glib-1-2 0.76-1 simple interprocess messaging syst ii libglib2.0-0 2.18.1-1 The GLib library of C routines ii libssl0.9.8 0.9.8g-13 SSL shared libraries ii libtelepathy-glib00.7.16-1 Telepathy framework - GLib library telepathy-idle recommends no packages. telepathy-idle suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500883: dmraid: boot fails after upgrading to 1.0.0.rc14-4
On Thursday 02 October 2008 14.32.18 Giuseppe Iuculano wrote: udevadm info --query=all --name=sda udevadm info --query=all --name=sdb Paste the output please. Giuseppe. [EMAIL PROTECTED]:~# udevadm info --query=all --name=sda P: /block/sda N: sda S: disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1LYB11332 S: disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1LYB11332 S: disk/by-path/pci-:03:00.0-scsi-0:0:0:0 E: ID_VENDOR=ATA E: ID_MODEL=SAMSUNG_SP2004C E: ID_REVISION=VM10 E: ID_SERIAL=SATA_SAMSUNG_SP2004CS07GJ1LYB11332 E: ID_SERIAL_SHORT=S07GJ1LYB11332 E: ID_TYPE=disk E: ID_BUS=scsi E: ID_ATA_COMPAT=SAMSUNG_SP2004C_S07GJ1LYB11332 E: ID_PATH=pci-:03:00.0-scsi-0:0:0:0 [EMAIL PROTECTED]:~# udevadm info --query=all --name=sdb P: /block/sdb N: sdb S: disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1LYB11326 S: disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1LYB11326 S: disk/by-path/pci-:03:00.0-scsi-1:0:0:0 E: ID_VENDOR=ATA E: ID_MODEL=SAMSUNG_SP2004C E: ID_REVISION=VM10 E: ID_SERIAL=SATA_SAMSUNG_SP2004CS07GJ1LYB11326 E: ID_SERIAL_SHORT=S07GJ1LYB11326 E: ID_TYPE=disk E: ID_BUS=scsi E: ID_ATA_COMPAT=SAMSUNG_SP2004C_S07GJ1LYB11326 E: ID_PATH=pci-:03:00.0-scsi-1:0:0:0 BTW I found this also: [EMAIL PROTECTED]:~# /lib/udev/vol_id /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1LYB11326-part2 ID_FS_USAGE=filesystem ID_FS_TYPE=ext3 ID_FS_VERSION=1.0 ID_FS_UUID=db631065-7ca8-45fc-bf60-a9259a732dec ID_FS_UUID_ENC=db631065-7ca8-45fc-bf60-a9259a732dec ID_FS_LABEL= ID_FS_LABEL_ENC= ID_FS_LABEL_SAFE= This 2nd partition is one of my raid1 volume, containing the root filesystem. I see ID_FS_USAGE is not raid as it should. Do I have a screwed raid setup? :) Do you know how could I change that ID_FS_USAGE? Peter -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
