Am Samstag, 7. Mai 2005 13:53 schrieb Marco d'Itri:
On May 07, Hendrik Sattler [EMAIL PROTECTED] wrote:
Package: ppp
Version: 2.4.3-20050321+1
Please upgrade.
Sorry, that did not help:
May 8 15:19:02 coruscant pppd[14083]: rcvd [LCP TermReq id=0xcc]
May 8 15:19:02 coruscant pppd[14083
Package: capiutils
Version: 1:3.6.2005-01-03-5
Severity: minor
Hi,
under load bootcode [contrnr [protocol:
The URL ftp://ftp.avm.de/cardware/b1/linux/firmware
is mentioned there.
However, this URL is not there, anymore. Instead, see #171446 for
a working URL.
Additionally, the firmware
Package: ifupdown
Version: 0.6.7
Severity: normal
Hi,
I am using the madwifi-ng driver from http://www.madwifi.org and use the
following in my /etc/network/interfaces file:
snip-
allow-hotplug ath0
iface ath0 inet dhcp
retitle 238314 ITP: siefs -- virtual filesystem for accessing memory of
Siemens mobiles
owner !
quit
Note that the URL changed from the original request:
http://chaos.allsiemens.com/siefs/
Since fuse is included in linux-2.6.14, this makes it more interesting than
before.
HS
Am Samstag, 29. Oktober 2005 00:17 schrieb Silvestre Zabala:
Package: obexftp
Version: 0.10.7-3
Followup-For: Bug #289181
the beta releases at http://triq.net/obexftp/beta-testing/ contain the
fix:
2005-08-06 Christian W. Zuckschwerdt [EMAIL PROTECTED]
* Nokia hack (suppressing
Am Montag, 31. Oktober 2005 21:27 schrieb John M Flinchbaugh:
Package: obexftp
Version: 0.10.7+0.10.8pre9-1
Severity: grave
Justification: renders package unusable
Previous obexftp version worked, but this one just does this:
---
[EMAIL PROTECTED]:~$ obexftp -t /dev/rfcomm0 -l
Custom
The previous message had numerous typos, here a corrected version:
The bug is believed to be fixed with obexftp-0.10.7+0.10.8pre9-3 in Debian
unstable. Actually it was fixed in obexftp-0.10.7+0.10.8pre9-2 which was not
uploaded to the archive.
pgptflzmVsjp5.pgp
Description: PGP signature
Am Montag 11 Dezember 2006 12:02 schrieb Rémi Denis-Courmont:
And again: where is this documented?
Partly in RFC 3542. Otherwise in glibc source code.
Ok, if this is a standard way, then that's valid behaviour. However, the words
in the RFC are _not_ that specific:
When the address is a
Package: linda
Version: 0.3.24
Severity: normal
Hi,
In the german UTF-8 locale, I get an incomplete output (english first for your
reference):
$ LC_ALL=C linda obexfs_0.10-2.dsc obexfs_0.10-2_i386.deb
E: obexfs; No manual page for binary obexautofs.
E: obexfs; No manual page for binary obexfs.
Am Sonntag 10 September 2006 00:35 schrieb Jurij Smakov:
Did you make any progress on this? It turned out that it was not easy for
me to prevent automatic spin-up of disks on power-up, so I could not
reproduce this problem. Please try installing using the latest dailies and
let me know if the
Hi,
although as KDE user, I am not fully happy about that, the ITP for bluez-gnome
(see #387923) also solves #382771. The BTS does not allow to express this,
AFAIK, that's why I send this message...
HS
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
Hi,
are there any plans for this package? Help needed? Is there a package already
available somewhere?
HS
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
remove libopenobex-1.0 source and its binary package from unstable
and testing.
thanks
Hendrik Sattler
PS: Edd Dumbill ist still marked as maintainer of libopenobex-1.0 because I
never did a re-upload to change the maintainer field in that package,
targetting its removal (and not put a non-sense
Am Freitag 20 Oktober 2006 21:34 schrieb Hadmut Danisch:
I experience the problem to be unable to sync with a Sony Ericsson
K610i. Before reporting bugs, the package should be updated.
Upgrading to the latest version does not always solve problems. It can also
create new ones.
I will not
Am Samstag 21 Oktober 2006 08:21 schrieb Hadmut Danisch:
I am currently trying to fix the problem with the upstream maintainer
and the usb library maintainer.
Did you get a solution that works for you? If yes, what was it?
HS
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Hi,
again an I wish I had a 64bit machine at home bug.
You can find the fix at:
http://obexpushd.svn.sourceforge.net/viewvc/obexpushd/trunk/src/obex_auth.c?r1=2r2=4view=patch
HS
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Am Mittwoch 11 Oktober 2006 15:06 schrieb Luca Capello:
Cc:ing all the interested people, sorry if you receive a double mail.
On Thu, 20 Apr 2006 14:30:57 +0200, Michael Holzt wrote:
The upstream author only intended it to be a hack and has orphaned
it. Unfortunately the package has a
Package: xmms-wma
Severity: important
Hi,
your package can link dynamically against upstream ffmpeg and thus should do
so because of e.g. security updates.
I attached a patch to achieve this and a new rules file to use the changes.
Please note that you still need to add build dependencies.
HS
retitle 244001 serial connection to Siemens 5x-series does not work
severity 244001 normal
found 244001 0.19-7
tags 244001 - upstream sid
stop
This applies to all 5x model (S56 is the USA version of the S55 but other *55
models also suffer from this).
Suggestion: use bluetooth or irda.
--
To
Package: apt-listchanges
Version: 2.63
Severity: important
Hi,
When running aptitude update; aptitude upgrade, the changes are displayed
just fine.
When doing essentially the same but with the aptitude GUI
(pressing 'u', 'U' 'g' 'g'), the message about reading the changelogs is
shown but NO
Package: libasound2
Version: 1.0.11-7
Severity: important
Hi,
with the upgrade from libasound2 to 0.12-1 breaks e.g. kaffeine:
snd_pcm_open() failed:-22:Invalid argument
Downgrading to libasound2_1.0.11-7 fixed the problem.
HS
-- System Information:
Debian Release: testing/unstable
APT
Hi,
In its postinst, apt-listchanges creates a configuration
file /etc/apt/listchanges.conf. It tries to remove it in its postrm
during a purge, using ucf, but ucf might not be installed when the
postrm runs when purgning (policy 7.2: postrm cannot rely on any
non-essential packages to be
Am Samstag 23 September 2006 17:25 schrieb Eugeniy Meshcheryakov:
I'm interested to see obexpushd in Debian. I'am a DD so I can package it
myself. I can also be your sponsor if you prefer to be it's maintainer.
Like with scmxx, I prefer to split up the roles of Debian maintainer and
upstream
reopen 387092
stop
Am Mittwoch 27 September 2006 16:46 schrieb Hendrik Sattler:
This bug was fixed by obexfs 0.10-2 but the changelog misses the closes
entry. Sorry.
Nope wasn't, how did it get through?
Even more sorry...
HS
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
Hi,
the problem actually is a misbehaviour in libopenobex.
It send the STREAMAVAIL too early, thus the file handle is not open, yet.
This is triggered by the K700i sending the first (END-OF-)BODY Header in the
first push packet (Siemens phones send it in the second packet and obexpushd
was
Am Samstag 02 Dezember 2006 13:08 schrieb Hendrik Sattler:
the problem actually is a misbehaviour in libopenobex.
It send the STREAMAVAIL too early, thus the file handle is not open, yet.
This is triggered by the K700i sending the first (END-OF-)BODY Header in
the first push packet (Siemens
reassign 398051 fuse
stop
Am Samstag 11 November 2006 15:25 schrieb Samuel Thibault:
Package: obexfs
Version: 0.10-3
Severity: normal
Adding
obexfs#-u1 /media/telephone fuse defaults,user,noauto 0 0
to /etc/fstab is not sufficient for letting users umount
/media/telephone: they get the
Package: opensync-plugin-irmc
Version: 0.19-2
Severity: wishlist
Hi,
The possible option of the plugin are documented nowhere in the package.
Actually, you can take a look at the source code. That's a bit thin, though.
Including upstreams README would be a start but it does not list all
Package: bluez-utils
Version: 3.1-3.1
Severity: important
Hi,
there is a changelog entry and an extremely thin (means: not useful at all)
manpage about passkey-agent.
Sounds like an important part, so where is it?
HS
-- System Information:
Debian Release: testing/unstable
APT prefers testing
Package: bluez-utils
Version: 3.1-3.1
Severity: important
Hi,
You say in the changelog that bluez-pin is no longer needed. This is clearly
wrong if you wanted interactive pin entry:
- bluez-pin already used d-bus, maybe only needs an update
- kdebluetooth' pin app doesn't work anymore
Is there
Package: installation-reports
Boot method: CD
Image version: etch beta 3
Date: 2006-08-14
Machine: SUN SparcStation 20 clone (WS-20L)
Processor: SuperSparc II 70MHz
Memory: 448 MB
Partitions:
Output of lspci and lspci -n:
(System has only SBUS)
Base System Installation Checklist:
[O] = OK,
Am Montag, 1. September 2008 00:04:49 schrieb Micha Lenk:
does the success report in the attached mail solve your problem or do
you have a different reader?
THe PCMCIA smart card readers differ from the USB ones and use a different
driver.
I didn't get around doing anything with it in the
Package: hotkey-setup
Version: 0.1-23
Severity: normal
Tags: patch
Hi,
appended is a .hk file that maps all unknown keys to something sensible.
The inclusion in the init script looks like
TravelMate\ 6592*)
. /usr/share/hotkey-setup/acer-travelmate-6592.hk
;;
Package: bluez-utils
Version: 3.36-1
Severity: important
Hi,
hcid (and probably other bluetooth stuff) will not startup if bluetooth is only
available
as kernel module. Thus, not loading it makes those pieces of software unusable.
Thus, the init script should make a call to modprobe bluetooth
Hi,
in addition to the bluetooth kernel module, the rfcomm kernel module must also
be loaded or else the built-in SDP server will silently fail to work. And
bluetooth without SDP can be seen as non-functional.
HS
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
Am Sonntag, 27. Juli 2008 20:02:31 schrieb Filippo Giunchedi:
hcid (and probably other bluetooth stuff) will not startup if bluetooth
is only available as kernel module. Thus, not loading it makes those
pieces of software unusable. Thus, the init script should make a call to
modprobe
Am Montag, 4. August 2008 13:49:09 schrieb Guus Sliepen:
What is missing here is whether or not mobile-manager comes with a GUI
component to interact with the daemon.
...and how it can maybe interact with network-manager. There is not so much
special about a GPRS/whatever device apart from the
Hi,
this bug is not present anymore with current bluez in Lenny. The SDP stuff was
finally fixed, there.
However, I still think that the SDP entry management in kdebluetooth is buggy,
so I leave it up to you to close it or set the severity to something lower,
e.g. normal or wishlist.
HS
Am Montag 11 Februar 2008 schrieb Neil Williams:
+CROSS=CC=$(DEB_HOST_GNU_TYPE)-gcc
Thanks for answering the first part. What is the CROSS variable about? Is it
not needed as configure finds right gcc by default.
HS
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Am Montag 11 Februar 2008 schrieb Neil Williams:
The cache file is handled externally.
+ --cache-file=$(DEB_HOST_GNU_TYPE).cache
What is this about. Is this absolutely necessary for cross-build support? I
don't think so.
HS
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Am Dienstag 12 Februar 2008 schrieb Neil Williams:
On Tue, 2008-02-12 at 00:09 +0100, Hendrik Sattler wrote:
Am Montag 11 Februar 2008 schrieb Neil Williams:
+CROSS=CC=$(DEB_HOST_GNU_TYPE)-gcc
Thanks for answering the first part. What is the CROSS variable about? Is
it not needed
Am Samstag 16 Februar 2008 schrieben Sie:
On Sun, Oct 07, 2007 at 07:59:01PM +0200, Hendrik Sattler wrote:
Hi,
In earlier versions of Bluez, it was not explicitely necessary to call
sdp_close() as the entry went away automatically when the connection to
the SDP was closed (e.g. when
Am Samstag 16 Februar 2008 schrieb Filippo Giunchedi:
On Sun, Oct 07, 2007 at 07:59:01PM +0200, Hendrik Sattler wrote:
Hi,
In earlier versions of Bluez, it was not explicitely necessary to call
sdp_close() as the entry went away automatically when the connection to
the SDP was closed
is activated NO MATTER WHAT :-( The
last setting is not preserved. In some environments, this may not be wanted!
I would have contacted upstream but it is unclear what the current upstream
contact address actually is.
Have fun
Hendrik Sattler
-- System Information:
Debian Release: lenny/sid
Am Dienstag 15 Januar 2008 schrieb Dmitry Borodaenko:
Greetings,
I've built latest version available from upstream (0.22-uctest),
packages are available from here:
http://people.debian.org/~angdraug/obexftp/
It didn't help me with my A1200 (I'm beginning to suspect it lacks
proper OBEX
Am Samstag 19 Januar 2008 schrieb Michal Čihař:
Package: obexfs
Version: 0.10-3+b2
Severity: normal
Hi
first I have to say that I have no clue where the bug actually is. But
when I follow obexfs documentation how to specify mount point in fstab,
it does not work. Simply
Am Sonntag 02 Dezember 2007 schrieb Sebastian Schmidt:
Package: obexfs
Version: 0.10-3+b2
Severity: wishlist
ObexFS 0.10 isn't able to connect to my phone without explicitly
specifying -B, ObexFS 0.11-rc3 seems to fix that.
Could you please upload an updated version of ObexFS, maybe into
Package: libgnome-keyring0
Version: 2.20.1-1
Severity: normal
Hi,
grepping through the sources, the hard dependency of libgnome-keyring0 on
gnome-keyring is bogus. I agree that you need the daemon to actually use the
keyring but since gnome libs (including this one) are often only chained
Am Donnerstag, 26. Mai 2005 19:05 schrieb Andreas Tille:
Thanks for the bug report. Because I have no idea how to
fix this I foreward this to the upstream authors.
Kind regards and thanks for using tipptrainer
Currently, Tipptrainer is abandoned by the upstream authors due to lack of
to the obexftp package that I maintain.
If you need help on this package, please tell me :)
Hendrik Sattler
Am Freitag, 3. Juni 2005 19:26 schrieb Michael Meskes:
On Fri, Jun 03, 2005 at 03:29:05PM +0200, Hendrik Sattler wrote:
did anything on this happen? I currently use the package from Fred
Schättgen: deb http://fred.hexbox.de/debian ./
I'm working on it, but have put it on hold until 3.4
Package: ssh
Version: 1:3.8.1p1-8.sarge.4
Severity: important
Hi,
I try to setup IPv6 on my local network. Ping6 already works but sshd refuses
to cooperate:
# sshd -d -e
debug1: sshd version OpenSSH_3.8.1p1 Debian-8.sarge.4
debug1: private host key: #0 type 0 RSA1
debug1: read PEM private key
Package: kdepim-dev
Severity: normal
Hi,
currently, to install kdepim-dev, I have to install ALL kdepim application
(as of 2005-02-18, this is BROKEN IN SARGE!). That is 12,5MB(!) as of today
to install a 55KB package :-/
However, I do not have a palm, why am I forced to install kpilot, I don't
Package: isdnactivecards
Severity: important
Hi,
With version 1:3.6.2005-01-03-3, the upgrade from Woody broke:
package isdnactivecards provided all the capi utils, including
/etc/isdn/capi.conf, see
Am Samstag, 12. März 2005 18:53 schrieb Ilya Voronin:
I clearly understand that.
But how can i build applications which uses libobexftp?
For example gobexftp - http://triq.net/obexftp/gobexftp-0.2.tar.gz.
They #include's obexftp/*.h and build fails - there is no 'uuid.h'.
libobexftp-dev
Package: docbook2x
Version: 0.8.3-1
Followup-For: Bug #262990
Hi,
this is extremely inconvenient situation. The docbook-utils have misleading name
because the cannot handle docbook-XML but provide a docbook2man script that just
gives you lots of errors on docbook-XML input.
The alternative is
Package: docbook-utils
Version: 0.6.14-1
Severity: important
Hi,
You state in the description:
Description: Convert Docbook files to other formats (HTML, RTF, PS, man, PDF)
The docbook-utils is a set of a few small programs intended to ease
everyday use of technical documentation software and
Package: xmlto
Version: 0.0.18-5
Severity: wishlist
Hi,
xmlto cannot check an XML file itself or change the encoding, so using
xmllint and piping to xmlto would be most useful :)
xsltproc already accepts stdin by using - as file name,
I guess xmlto uses it?
HS
-- System Information:
Debian
Package: xmlto
Version: 0.0.18-5
Severity: normal
Hi,
checking the created HTML file validator.w3c.org shows the main flaw with
many HTML files:
You HAVE TO specify the DOCTYPE in the HTML document.
HS
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500,
Package: xmlto
Version: 0.0.18-5
Severity: normal
Hi,
is there any reason why ISO-8859-1 is enforces and entities used for everything
that does not fit in?
Why isn't the encoding of the XML file used? It has to fit anyway and makes the
output much more readable!
I assume you agree that forcing
Package: isdnutils-base
Version: 3.6.2005-01-03-5
Severity: minor
Hi,
I only use this to start isdnlog but with the new start script (probably due to
the LSB stuff?)
I cannot see anymore what items were started. When entering:
myservername /etc/init.d# ./isdnutils start
* Starting ISDN
Hi,
another suggestion for this:
.PHONY: %-all
%-all:
make -C $* all
.PHONY:all
all: src-all po-all
(as replacement for the old all target). You can do equivalent with the other
targets. I checked it and it works nice. If you know an even more generic
rule, let me know.
I doubt,
Am Montag, 11. April 2005 00:45 schrieb Hendrik Sattler:
another suggestion for this:
.PHONY: %-all
%-all:
make -C $* all
.PHONY:all
all: src-all po-all
The following solution is now in the tipptrainer-CVS:
--snip
[EMAIL PROTECTED
Package: alsaplayer-common
Severity: normal
Hi,
just try out to install the following combination of alsaplayer components:
apt-get install alsaplayer-text alsaplayer-alsa
Reading Package Lists... Done
Building Dependency Tree... Done
The following extra packages will be installed:
tags 271627 + wontfix
stop
Hi,
although I am the author of the requested programs and debian maintainer of
obexftp, I will not include them in the package.
However, the current CVS of the flexmem-tools have a proper debian subdir (may
be delayed by a few hours by the time of this writing). To
Package: lintian
Version: 1.23.7
Severity: normal
Hi,
lintian outputs the following error:
E: obexftp: changelog-file-not-compressed ChangeLog.html
N:
N: Changelog files must be compressed using `gzip -9'. Even if they start
N: out small, they will become large with time.
N:
N: Refer to
Hi,
I tried to test the .deb from your site but it is compiled against a version
of kdelibs4 that is not available in Debian sid
HS
--
Mein GPG-Key ist auf meiner Homepage verfügbar: http://www.hendrik-sattler.de
oder über pgp.net
PingoS - Linux-User helfen Schulen:
Am Mittwoch, 12. Januar 2005 22:57 schrieb Adam Goode:
Package: obexftp
Version: 0.10.6-3
Tags: patch
Followup-For: Bug #251252
Very close, but off by 1 error keeps it broken. (No idea how this
bug got in there in the first place. Byte 1 is reserved in the
structure.)
Probably my fault,
Package: qt3-designer
Version: 3:3.3.3-7
Severity: normal
Hi,
after installing qt3-designer, it does not show up in the Development section
of the KDE menu but in lostfound (nicht zuzuordnen in German).
HS
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500,
Package: bluez-utils
Version: 3.13-1
Severity: important
Hi,
In earlier versions of Bluez, it was not explicitely necessary to call
sdp_close() as the entry went away automatically when the connection to the
SDP was closed (e.g. when a program was killed).
This does not work anymore and is a
Am Samstag 30 Juni 2007 13:33 schrieb [EMAIL PROTECTED]:
Package: wnpp
Severity: wishlist
*** Please type your report below this line ***
* Package name: siefs
Version : 0.5
Upstream Author : Dmitry Zakharov [EMAIL PROTECTED]
* URL :
Am Samstag 30 Dezember 2006 14:58 schrieb Filippo Giunchedi:
On Wed, Dec 27, 2006 at 12:27:22PM +0100, Hendrik Sattler wrote:
I am not sure why SCAN_INQUIRY is not set in discovto is not 0 (see
hcid/main.c:295). This is probably to not make it discoverable after
plugging the bt dongle
Am Sonntag 31 Dezember 2006 13:36 schrieb Marcel Holtmann:
Note that deleting the config file in /var/lib/bluetooth is an
essential part of the solution.
this is a big _NO_. Don't mess with the configuration storage directly.
The configuration storage has priority over the hcid.conf file
Am Sonntag 31 Dezember 2006 15:40 schrieb Marcel Holtmann:
The administrator should be able to change the default (visibility or
not) or there should be an always working default.
The default is not visible (due security reasons) and if you decide it
to switch it to visible (even with a
Happy New Year 2007.
Am Sonntag 31 Dezember 2006 16:22 schrieb Marcel Holtmann:
* plugging the dongle in and then chaning to connectable may be too
late Practically the same thing as the default from above.
This is why we go back to non-discoverable after 180 seconds by default.
Am Sonntag 31 Dezember 2006 15:40 schrieb Marcel Holtmann:
Beside that, running the dbus command suggested in this bug report works,
too. It should be noted, though, that you have to be root.
No. You have to be console user (or root).
I cite from dbus policy that I somehow just don't get
Am Dienstag 02 Januar 2007 18:52 schrieb Marcel Holtmann:
this is a bluez-utils-2.x config file and simply outdated. Check the
source code for the latest one.
The problem is not that the message does not arrive at hcid. If that is the
problem, setting mode to off would also not work but it
Am Dienstag 02 Januar 2007 18:52 schrieb Marcel Holtmann:
Beside that, running the dbus command suggested in this bug report
works, too. It should be noted, though, that you have to be root.
No. You have to be console user (or root).
I cite from dbus policy that I somehow just
Am Dienstag 02 Januar 2007 20:13 schrieb Marcel Holtmann:
Hi Hendrik,
this is a bluez-utils-2.x config file and simply outdated. Check the
source code for the latest one.
The problem is not that the message does not arrive at hcid. If that is
the problem, setting mode to off would
Hi,
as of this writing, w32api was updated to version 3.8 and mingw runtime was
update to 3.11.
Additionally, your README.Debian is wrong, caused by the fact that the Debian
minw32-runtime actually includes w32api _and_ mingw-runtime. Only linking
with the latter should actually need the
Package: kaffeine
Version: 0.8.3-1
Severity: important
Hi,
I use the i810 driver in current Xorg (Debian Etch) and this bugs makes
kaffeine totally useless when used with xv or xxmc output method.
Before running any (MPEG-2/DIVX/etc.) movie with kaffeine:
$ xvattr
Found Xv 2.2
Adaptor: 0
Name:
Hi,
there is a solution to this. After thoroughly stuying the bluez-utils code, I
saw the reference to a config file, namely dir/bdaddr/config.
This file needs an entry
mode discoverable
However, if the file is present in /var/lib/blueooth, that one is used.
So you must delete the latter bdaddr
Am Dienstag 06 März 2007 10:53 schrieb Daniel Leidert:
is there any reason why ISO-8859-1 is enforces and entities used for
everything that does not fit in?
You should ask docbook-xsl upstream.
Why isn't the encoding of the XML file used? It has to fit anyway and
makes the output much
Am Donnerstag 22 März 2007 21:26 schrieb martin f krafft:
also sprach Debian Bug Tracking System [EMAIL PROTECTED]
[2007.03.22.2118 +0100]:
Note that the printed output refers to what is _detected_ (via
SDP) and not necessarily to what is used. You can use hcidump to
check that. I just
Am Montag 26 März 2007 04:38 schrieb Cyril Brulebois:
currently, no libbluetooth2-dev is available on GNU/kFreeBSD (and
that is quite normal, I'd say, given the description and the
source of bluez-libs), so your package can't be built on this
platform. Please find attached a patch to make
Am Montag 26 März 2007 04:38 schrieb Cyril Brulebois:
Package: libopenobex
Version: 1.3-3
Severity: wishlist
Tags: patch
Hi,
currently, no libbluetooth2-dev is available on GNU/kFreeBSD (and
that is quite normal, I'd say, given the description and the
source of bluez-libs), so your
Am Montag 26 März 2007 21:12 schrieb martin f krafft:
What does it:
1. In the parameter -b, it does an SDP lookup for the given
address. _There_, it prints the message that you see.
What does it look for, which SDP service?
It looks for the service that is described in the
Bluetooth
Am Montag 12 März 2007 12:30 schrieb Tim Brown:
Package: wnpp
Severity: wishlist
Owner: Tim Brown [EMAIL PROTECTED]
* Package name: sucrack
Version : 1.1
Upstream Author : Nico Leidecker [EMAIL PROTECTED]
* URL : http://www.leidecker.info/
* License :
Am Montag 12 März 2007 17:19 schrieb Tim Brown:
On Monday 12 March 2007 16:08, Hendrik Sattler wrote:
Am Montag 12 März 2007 12:30 schrieb Tim Brown:
Package: wnpp
Severity: wishlist
Owner: Tim Brown [EMAIL PROTECTED]
* Package name: sucrack
Version : 1.1
reopen 315165
thanks
Hi,
the current version again does not compile with -ansi (or -std=c99).
The following error messages come up with -ansi:
usr/include/usb.h:67: error: expected specifier-qualifier-list
before ‘u_int8_t’
/usr/include/usb.h:73: error: expected specifier-qualifier-list
Package: hdparm
Version: 6.9-1
Severity: normal
Hi,
There is a problem with the boot order. Lets take a look at it:
1. udev calls hdparm script even on coldplug
2. init.d script itself runs
3. hal will start and take a look at the disks
You may think: what's wrong?
Well, the suspend and sleep
Package: docbook-xsl-doc-html
Version: 1.72.0.dfsg.1-1
Severity: normal
Hi,
The Recommends for a webserver seems a bit VERY strong.
You probably meant to recommend (as abstract example)
webserver or browser
not
webserver and browser
Thus, the recommends line should be
apache | httpd |
Am Samstag 19 Mai 2007 12:24 schrieb Achim Bohnet:
I've tried to build kdebluetooth-dbus-integration and it fails
due to missing symbol in 0.19. So I need 0.21 too.
Can you give me the output (or the symbol name)?
[11:59] dgollub allee: i needed latest version of opbexftp
[11:59] allee
Hi,
Am Dienstag, 16. August 2005 14:55 schrieb Jukka Suomela:
It seems that I had the same problem with my Nokia 6680 as described in
the bug report #289181. I use a USB-Bluetooth dongle to communicate
with the device, and I have the latest packages from Debian unstable.
All obexftp commands
Am Samstag, 18. Juni 2005 03:40 schrieb Ben Pfaff:
Hendrik Sattler [EMAIL PROTECTED] writes:
running configure might reveal that it depends on the following files:
config.guess
config.sub
install-sh
There does not seem to any method to get those files by looking only
at the autoconf
Am Freitag, 1. Juli 2005 12:50 schrieb SDiZ:
tag: patch
I have experience the same problem on My Sharp GZ100, the following
patch fix it.
I know it's ugly, but it works..
+++ scm-075/src/actions.c 2005-07-01 10:35:48.0 +
@@ -109,6 +109,15 @@
char* ack;
Am Freitag, 1. Juli 2005 17:39 schrieb SDiZ:
I guess there are some old data in the read buffer, because of what i
see in the debug output:
Sending command: ATZ
Received: ERROR
Value matched ERROR.
Value matched ERROR.
Received: CPM=
Value matched nothing.
Value matched nothing.
Am Freitag, 1. Juli 2005 18:33 schrieb SDiZ:
I have tried you patches, it worked only once out of five trials...
Maybe the tcflush() function never works with my IrDA dongle?
nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100
Works here:
write(4, +++, 3) = 3
nanosleep({1,
Hi,
Info: I'm the developer of kvpnc and have still build debian packages for
kvpnc (see download page).
Your donwload page is empty (Konqueror and FireFox).
HS
pgpzntjjDfFeh.pgp
Description: PGP signature
Package: pingus
Version: 0.6.0-8
Severity: minor
Hi,
I use the german l10n and 8bit characters like üöä are missing from the
texts in the game.
HS
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell:
1 - 100 of 246 matches
Mail list logo