Package: maxima-emacs
Version: 5.10.0-1
maxima-emacs depends on tetex-extra, which can't be installed alongside
texlive. However texlive should satisfy the dependency. I wish I could
install both maxima-emacs and texlive.
Thanks - Jack
signature.asc
Description: This is a digitally signed
, child_tidptr=0x30036728) = 4224
It's not clear to me what gnome-session is doing while it hangs. I'm
not sure what to do next to diagnose this problem.
Thanks, Jack
signature.asc
Description: This is a digitally signed message part
pgm
pgmpipe
md5
Thanks - Jack
signature.asc
Description: This is a digitally signed message part
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Oops! My mistake.
Jack.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.5 (GNU/Linux)
iD8DBQFFFrTy7l4lrvUNGf4RAsSMAJ4tuIoGc2FOfnKVLbLTLlwogxV0aQCfYLhJ
WMEfTvIX/0XRf9qIM2uOmWM=
=1OaZ
-END PGP SIGNATURE-
--- /etc/default/ntpdate2006
one suggested -r would be the best option, I do agree.
Yes, indeed, of course!
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Actually, on second thoughts, I prefer -e, since if /etc/ntp.conf has no
read permission, I'd prefer to have it print an error than to continue
silently (But it's maintainers' decision of course).
Jack
-BEGIN PGP SIGNATURE-
Version: GnuPG
this (ntpdate.default.patch).
I've also included a patch to fix this in the source package
(ntpdate.srcpkg.patch).
Hope this helps,
Jack
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.5 (GNU/Linux)
iD8DBQFFFqN67l4lrvUNGf4RAlbFAKCD7LWH+x26DZis2lk1/BAr0YnTZQCbByVu
GY0gTHykgmmhObJf6gtRNjk
this patch upstream.
The source package is currently awaiting sponsorship, but is meanwhile
available at: http://mentors.debian.net/debian/pool/main/p/png2html
Regards, Jack.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.5 (GNU/Linux)
iD8DBQFFFW977l4lrvUNGf4RAlJ7AJ9
there is still a problem, please reopen it.
The source package is currently awaiting sponsorship, but is meanwhile
available at: http://mentors.debian.net/debian/pool/main/p/png2html
Regards, Jack.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.5 (GNU/Linux
, and I've attached a patch that fixes this bug, which
has already been applied to the next Debian version awaiting upload, but which
you may like to apply to allow everyone else to benefit.
Kind Regards,
Jack Grahams
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.5 (GNU/Linux
in Debian, so I could use gpg keys for https.
Thanks - Jack
signature.asc
Description: This is a digitally signed message part
not sure whether checkroot.sh should call on_ac_power with
PATH=/usr/bin:$PATH or on_ac_power should call /usr/bin/awk instead of
awk.
Thanks - Jack
signature.asc
Description: This is a digitally signed message part
, it did not.
Thanks - Jack
signature.asc
Description: This is a digitally signed message part
Package: zaptel-source
Version: 1.2.8.dfsg-1
I encounter this error building zaptel-source with linux 2.6.18-rc5-mm1 -
[...]
CC [M] /home/jablko/src/modules/zaptel/vzaphfc/vzaphfc_main.o
/home/jablko/src/modules/zaptel/vzaphfc/vzaphfc_main.c: In function
'hfc_sniff_zaptel_d_channel':
- Jack
signature.asc
Description: This is a digitally signed message part
Package: beagle
Version: 0.2.8-1
Severity: wishlist
Hi there,
I'd like to ask the inclusion of the thunderbird backend in the next
packaging of Beagle. Such feature has entered 0.2.8 but it is not available
in the -1 release in Debian:
[EMAIL PROTECTED]:~/Desktop/beagle-0.2.8$ beagled
I don't think this bug has to be closed. Here's the requested output on
my Sid AMD64 machine (looks like an AMD64 problem, given the kanotix
parent poster? And I have SMP too...):
nostromo:~# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree... Done
Calculating
Loïc Minier wrote:
Uhoh, looks like a dpkg or APT bug.
Definitely, see under
Can you please send the output of:
COLUMNS=200 dpkg -l libbonobo\*
and:
apt-cache policy libbonobo2-0
nostromo:~# COLUMNS=200 dpkg -l libbonobo\*
Desired=Unknown/Install/Remove/Purge/Hold
|
On Fri, Aug 18, 2006 at 02:31:59PM +0100, Alastair McKinstry wrote:
Hi,
Could you please test with the symlink in /etc.rcS.d in place, but with
all the
options in /etc/console-tools/config commented out?
The system boots normally. The bottom half of the text-mode screen
doesn't
Michael Vogt wrote:
I can't reproduce this segfault here, can you please do the following
(as root):
# gdb synaptic
(gdb) run
[make synaptic crash by install hddtemp]
(gdb) backtrace
and attach the resulting backtrace to this bugreport?
Hi there Michael,
sorry for the delay but I was on
On Sun, Aug 13, 2006 at 09:59:19AM +0100, Alastair McKinstry wrote:
Aha! Removing the symlink in /etc/rcS.d to
/etc/init.d/console-screen does indeed make the bug go away. If that
caused any side effects, I didn't detect them.
This is confusing; console-tools has not changed in
On Mon, Aug 07, 2006 at 08:30:58AM -0300, Henrique de Moraes Holschuh wrote:
On Sun, 06 Aug 2006, Jack Carroll wrote:
In general, it's _most_ unwise for any program to touch video modes,
until the user has logged in and taken control. Otherwise, there is too
Agreed. But AFAIK
- Forwarded message from Jack Carroll [EMAIL PROTECTED] -
From: Jack Carroll [EMAIL PROTECTED]
To: Henrique de Moraes Holschuh [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re: [Pkg-sysvinit-devel] Bug#381641: Video mode change during init
script disrupts fixed freq monitor
On Mon, Aug
Package: initscripts
Version: 2.86.ds1-14.1
Part way through the boot scripts, the bottom half of the
text mode display suddenly goes black and stays that way. The screen isn't
compressed; the messages that have already scrolled to the top half are
still there, but all the
Package: synaptic
Version: 0.57.11
Severity: normal
Hi there,
I have a problem with synaptic. It segfaults reproducibly everytime there is
an upgrade in package hddtemp. Installation of the package is fine but
Synaptic dies when debconf is supposed to ask about changing or keeping the
Package: bash
Version: 3.1-4
In Debian etch, the following lines appear in ~/.bash_profile:
# set PATH so it includes user's private bin if it exists
if [ -d ~/bin ] ; then
PATH=${HOME}/bin:${PATH}
fi
If the user logs in from a text-mode screen, .bash_profile executes
and
Package: exim4-base
Version: 4.62-1
By design, exim4 generates an envelope-sender address by
concatenating the user name and host FQDN, when the From: header contains an
e-mail address different from the user account and host name. As described
in the manual, there is no way to turn this
Package: sensors-applet
Version: 1.6.2-1
Severity: wishlist
Hello there,
I'd like to ask how likely is it to have NVidia support on future versions of
sensors-applet.
I have tried to compile it myself starting from debianized sources and
adding the --with-nvidia flag to debian/rules, but
Hi there,
I have tried doing the same as above using latest nvidia-settings
sources from Debian (1.0+20060516), but I get the same error, that I
report, on ./configure for sensors-applet:
[cut]
checking X11/Xlib.h usability... yes
checking X11/Xlib.h presence... yes
checking for
On Sun, Jun 11, 2006 at 05:54:04PM -0400, David Nusinow wrote:
On Sun, Jun 11, 2006 at 12:26:03AM -0400, Jack Carroll wrote:
Package: xorg
Version: 1:7.0.20
Under Etch, an ordinary user can't start the windowing system.
In this test, /etc/rc2.d has been edited so
Package: gdm
Version: 2.14.5-1
When logging in from the command line, ~/.bash_profile executes as
expected. A clause such as:
if [ -d ~/bin ] ; then
PATH=~/bin:${PATH}
export PATH
fi
does what it's expected to.
But if /etc/rc2.d starts gdm at boot time, and the
Package: xorg
Version: 1:7.0.20
Under Etch, an ordinary user can't start the windowing system.
In this test, /etc/rc2.d has been edited so that it doesn't start
gdm at boot time.
The user anna logs in and issues the command
startx
The result is
Package: linux-image-2.6.15-1-686
Version: 2.6.15-8
This report is for Etch as of 5/28/2006.
Etch was installed on 4/15/2006. It was upgraded around 5/24/2006,
and that appears to have broken the smc-ultra driver. A number of utilities
and libraries were automatically upgraded
A test of aptitude on Sarge shows that it doesn't install Suggests:
dependencies by default there either. Some of the Suggests: dependencies of
mozilla-firefox are not installed under Sarge; nevertheless cupsys-bsd is
installed by default when Print server is selected in tasksel.
On Sun, Apr 30, 2006 at 06:05:47PM +0100, Roger Leigh wrote:
Make sure you are using the lpr from cupsys-bsd.
You have narrowed down the bug. The lpr command installed by etch
belongs to the lpr package, not to cupsys-bsd. Nevertheless, the Etch
cupsys package shows cupsys-bsd as a
Package: cupsys
Version: 1.1.23-12
This report is for the version of cupsys currently installed by
etch.
The version installed by sarge does not exhibit the bugs reported
here.
Attempting to add or modify an H-P 5100 printer using the GUI config
tool does not display any
Package: cupsys
Version: 1.1.23-12
This report is for the version of cupsys currently installed by
etch.
The version installed by sarge behaves differently.
The Software Users Manual says the lpr command has the same -o
options as the lp command. For the past several
- Forwarded message from Jack Carroll [EMAIL PROTECTED] -
Date: Fri, 7 Apr 2006 17:08:45 -0400
From: Jack Carroll [EMAIL PROTECTED]
To: Frans Pop [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re: Bug#361180: Debian installer doesn't install kernel
Two of you
On Fri, Apr 07, 2006 at 08:21:52AM +0200, Geert Stappers wrote:
Tags 361180 moreinfo
thanks
On Fri, Apr 07, 2006 at 12:23:00AM -0400, Jack Carroll wrote:
Package: installation-reports
Debian-installer-version: www.debian.org/devel/debian-installer 2006-0406
daily build
uname
This is a preliminary report. I can do more detailed tests and file
a new bug report, if desired.
A quick test with debian-installer on floppies, which uses a 2.4.27
kernel, shows that the Tulip board works with two 3C905B boards also
present, if I unload the de4x5 driver and
If the target machine is configured with two identical 3C905B
boards:
eth0 gets assigned to IRQ 11 and shared with uhci_hcd:usb1.
eth1 gets assigned to IRQ 10 and shared with cs46xx.
With two 3C509B boards installed and configured, the kernel can also
assign an IRQ to one ISA-PNP
Package: linux-image-2.6.15-1-686
Version: 2.6.15-8
Unlike kernel-image-2.6.8, this kernel does not leave enough IRQs
available for ISA boards.
The test machine has hardware configured as a 3-port Ethernet router
and firewall. It works as intended under a stock Sarge distribution
On Mon, Apr 10, 2006 at 10:20:36PM +0200, Frans Pop wrote:
reassign 361180 base-installer
retitle Selecting 2.6 kernel when installing using 2.4 will break install
thanks
On Monday 10 April 2006 21:11, Jack Carroll wrote:
That revealed the place where the files get deleted. I'll see
On Mon, Apr 10, 2006 at 10:20:36PM +0200, Frans Pop wrote:
So, if you'd just accept the 2.4 kernel offered by default, the
installation will go fine. You can upgrade to a 2.6 kernel after the
installation finishes.
This procedure worked with a PCI network board (3c59x). The
On Mon, Apr 10, 2006 at 11:55:26PM +0200, Frans Pop wrote:
Please do not reply to all. I had set a correct reply-to header for my
previous mail. In general: please only reply to the bug report
([EMAIL PROTECTED]).
OK.
On Monday 10 April 2006 23:36, Jack Carroll wrote:
I don't
Two of you replied to my bug report. I'll send my replies to both
of you.
On Fri, Apr 07, 2006 at 01:21:50PM +0200, Frans Pop wrote:
On Friday 07 April 2006 06:23, Jack Carroll wrote:
FIRST RUN:
At reboot, the GRUB screen listed only Other operating systems,
showing the kernel
- Forwarded message from Jack Carroll [EMAIL PROTECTED] -
Date: Fri, 7 Apr 2006 17:08:45 -0400
From: Jack Carroll [EMAIL PROTECTED]
To: Frans Pop [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re: Bug#361180: Debian installer doesn't install kernel
Two of you
)
This doesn't make any sense to me. I'll see if I can get an answer
from Comcast as to why it's doing this.
On Saturday 08 April 2006 00:03, Jack Carroll wrote:
During kernel download, ls /target/boot shows
System.map-2.6.15-1-686
config-2.6.15-1-686
initrd.img-2.6.15-1-686.new
On Sat, Apr 08, 2006 at 12:19:30AM +0200, Frans Pop wrote:
On Saturday 08 April 2006 00:03, Jack Carroll wrote:
During kernel download, ls /target/boot shows
System.map-2.6.15-1-686
config-2.6.15-1-686
initrd.img-2.6.15-1-686.new
vmlinuz-2.6.15-1-686
Good so far. I'm assuming
On Fri, Apr 07, 2006 at 08:21:52AM +0200, Geert Stappers wrote:
Tags 361180 moreinfo
thanks
On Fri, Apr 07, 2006 at 12:23:00AM -0400, Jack Carroll wrote:
Package: installation-reports
Debian-installer-version: www.debian.org/devel/debian-installer 2006-0406
daily build
uname
On Fri, Apr 07, 2006 at 08:21:52AM +0200, Geert Stappers wrote:
Please provide the output of
fdisk -l /dev/hda
Here you are:
Disk /dev/hda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start
Package: installation-reports
Debian-installer-version: www.debian.org/devel/debian-installer 2006-0406
daily build
uname -a: Not available. Boot failed.
Date: 20060406 1800
Method: How did you install? Network, with 3C905 card, DHCP
What did you boot off? Floppies
If network
Loïc Minier wrote:
Installing gstreamer010? Which exact package did you mean?
Sorry for the lousy information, I was in a hurry :)
This is what I meant:
[EMAIL PROTECTED]:~$ dpkg -l *gstreamer0.10*
Desired=Unknown/Install/Remove/Purge/Hold
|
Hello there,
I'd like to confirm the bug for rhythmbox 0.9.3.1-1, and to confirm that
installing gstreamer010 fixes the problem.
Two questions:
1) Shouldn't Rhythmbox depend on gstreamer010 then?
2) Do I have to keep both 08 and 010 or can gstreamer08 be uninstalled?
I suppose there is some
Quote from the dashboard-hackers mailing list:
Hi,
On Tue, 2006-02-07 at 11:59 +, Andrei Mikhailovsky wrote:
I've installed beagle from a debian unstable distribution package. The
version is 0.2.0. I am experiencing occasional segmentation faults (once
every hour or so), while the
Just to update with the new mono and Beagle packages:
[EMAIL PROTECTED]:~$
=
Got a SIGSEGV while executing native code. This usually indicates
a fatal error in the mono runtime or one of the native libraries
used by your
Distribution: Debian testing/unstable
Package: beagle
Severity: critical
Version: GNOME2.10.2 0.1.3
Gnome-Distributor: Debian
Synopsis: Beagled crashes on startup
Bugzilla-Product: beagle
Bugzilla-Component: General
Bugzilla-Version: 0.1.3
Description:
Description of Problem:
I am running Debian
in detail what happens on my box, but in short I guess it's the
same bug.
I can reproduce the bug regularly through this sequence:
1) start a plain X session (xterm)
2) run xscreensaver - flickering
3) kill xscreensaver - stop flickering.
Riccardo `Jack' Lucchetti
Dipartimento di Economia
Università
Package: install
Severity: minor
Hello,
I have tried the d-i gtk installer on an iBook G4 as suggested in this
powerpc list message:
http://lists.debian.org/debian-powerpc/2005/11/msg00109.html
As reported in the thread, looks like these minor problems are known, but
there are no bugs filed
: 4570
admin(19170): HTTP_ACCEPT_LANGUAGE: en-us
admin(19170): HTTP_ACCEPT_ENCODING: gzip, deflate
--
ANY help would be appreciated.
Best regards,
Jack Greene
IT Manager
tel: (858) 450-4420 Ext. 14
cel: (858) 722-7911
. In
any case, the package should be nearly uploadable. I'm a little busier
these days than I was last year, but I can still sponsor this package if
no one else is up for it.
jack.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
is best here.
I believe I was only sponsoring matplotlib and it's dependecies that
weren't already in Debian. I'm not sure if Vittorio has sponsors for
other packages, so you might want to wait for him to chime in.
jack.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
Package: libaspell15c2
Followup-For: Bug #317873
I'd just like to confirm that the last distupgrade (15/7/2005) tends to fail
because of
this package. It is however enough to exclude gaim/gaim-data and
gedit/gedit-common from upgrade to go straight without problems.
I also tried to pull Gaim
The Penis Patch is amazing
http://www.felmuh.com/ss/
The truth is more important than the facts.
Silent gratitude isn't much use to anyone.
It is a true saying that One falsehood leads easily to another.
A problem well stated is a problem half solved.
I stand in awe of my
Having problems in bed? We can help!
http://wrong.bestmedz4healt.info/?Macedonianxtvuytotaledzgvornament
Fortune favors the bold.
Pray you now, forget and forgive.
With just enough of learning to misquote.
Under capitalism, man exploits man. Under communism, it's just the
Following the final release of Sarge, I was able to spend a day and
a half testing the behavior of netcfg with ISA boards in more detail.
Things are a little clearer now.
First, the behavior changes if all PCI network boards are removed
from the system.
RUN #1: If I installed
Package: net-tools
Version: 1.60-10
Severity: normal
With a 2.4 kernel, the route command works as described by its man page.
With a 2.6 kernel, any form of route add -net or route add -host other than
route add -net default produces an error message
SIOCADDRT: Invalid argument
In at least
Software should be easy to use!
http://dyxgrw.8xcntpq1niqx5r8.aconitumil.com
Bad spellers of the world, untie!
Things are only impossible until they're not.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: netcfg
Debian-installer-version: RC3, from lcs.mit.edu
uname -a:
Date: 5/11/2005 +/- 1 day
Method: RC3 CDs
Machine: H-P Vectra VL
Processor: Pentium 2
Memory: 128M
Root Device: IDE /dev/hda
Root Size/partition table:
/ 4.8 GB
/var2.5 GB
/home
information or to have a broker contact you please visit:
http://35955.t0wers.com/formupdate.asp
Best Regards,
Jack Cash,
Account Manager
Database Deletion:
http://35955.t0wers.com/deletion.asp
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
network boards through netcfg
should have a higher severity than that.
thanks
On Saturday 14 May 2005 07:10, Jack Carroll wrote:
The installer is able to configure PCI network boards, but not ISA
network boards.
This machine is set up to be a multihomed router/firewall, among
Package: installation-reports
Debian-installer-version: RC3, from lcs.mit.edu
uname -a:
Date: 5/11/2005 +/- 1 day
Method: RC3 CDs
Machine: H-P Vectra VL
Processor: Pentium 2
Memory: 128M
Root Device: IDE /dev/hda
Root Size/partition table:
/ 4.8 GB
/var2.5 GB
Client Update:
Several Companies have been competing for your mortgage
refinance application over the past 2 weeks.
The company that offered the lowest rate, and largest
loan quantity has requested your information be verified.
http://obvcollard.1ndeed.com/formupdate.asp
Thanks,
Jack Abel
to reinstall and retest.
-Jack
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I have experienced problems with Nimbus Sans L on both Woody and Sarge
(using Gnome in both cases). Nimbus Sans L Condensed was used when I
specified Nimbus Sans L. Also, specifying Helvetica (which I believe
should cause Nimbus Sans L to be substituted) resulted in Nimbus Sans L
Condensed
Package: tomcat4
Version: 4.1.31-2
Severity: grave
Justification: renders package unusable
When tomcat4 is started, it gives a brief password prompt, which then times
out. The output looks like this:
Starting Tomcat 4.1 servlet engine using Java from /usr/share/j2sdk1.5-sun:
Password: su:
This was caused with me messing around with pam and breaking it. It is not a
bug with tomcat4. Tomcat 4 works fine, thanks! Please close this bug.
Sorry for wasting your time!
-Jack
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Package: tetex-bin
Version: 2.0.2-26
Followup-For: Bug #293179
i use the courier font a lot to typeset linux shellcode,
but in the debian testing the backticks appear wrongly
in the output. pdflatex got it all right, but dvips messed them up.
So I compared the strace of both and found that the
to gnome-sessi
on.
[EMAIL PROTECTED]:~$ ps aux | grep session
jack 1737 0.0 3.2 18540 8456 ?S18:13 0:00 x-session-manager
jack 1773 0.0 0.3 3016 900 ?Ss 18:13 0:00 /usr/bin/ssh-agen
t x-session-manager
[EMAIL PROTECTED]:~$ sudo update-alternatives --list x
Package: abiword
Version: 2.0.14-1
When installing abiword on sarge, no entry appears in the Debian Menu System.
Please reference
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=258918 when deciding
on Abiword, Abiword Personal or some other name for the entry.
Thanks,
-Jack
501 - 580 of 580 matches
Mail list logo
