On Sun, Jan 08, 2006 at 09:28:24AM +0100, Harald Dunkel wrote:
Michael Vogt wrote:
You can run apt-get with --allow-unauthenticated or
APT::Get::AllowUnauthenticated=true in apt.conf
Thanx for the hint, but this option just changed the error
message. Now I get:
W: There are no
Package: libmysql-java
Version: 3.1.11-1
Severity: important
The error is:
Caused by: java.lang.RuntimeException: Unable to initialize character
set mapping tables at
com.mysql.jdbc.CharsetMapping.clinit(CharsetMapping.java:73)
This has been reported by numerous people, all seem
Package: apt
Followup-For: Bug #388708
I also encountered this problem and thank you Manoj for explaining how
to fix it. I was totally lost. Because apt didn't work, users have to
download the deb of 0.6.45 directly from the repository and install it
with dpkg. It's a gnarly fix.
Seems like
Package: mozilla-psm
Version: 2:1.7.12-1.2
Severity: normal
Sorry for the lack of information, but the other day, I was
filling out a form at a rental listing service, and before
I completed the form, for no reason I was prompted for the
master password. I did not hit anything, and after
Package: xulrunner-1.9
Version: 1.9.0.3-1
Severity: important
Backgrounds of table cells or of div elements do not line up
correctly. This has been a problem since Iceweasel 3.0.1 and
it's starting to get difficult to use some sites. It happens
in both Iceweasel and Epiphany, but not in
I think these bugs are related. They are NOT fixed as of
3.0.3. This happens with both Iceweasel 3.0.3 and Epiphany
2.22.3, but does not occur in Konqueror.
I filed bug 501856 for xulrunner-1.9.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=501856
See http://www.boardmod.org - backgrounds
On Sat, 11 Oct 2008, Mike Hommey wrote:
I think these bugs are related. They are NOT fixed as of
3.0.3. This happens with both Iceweasel 3.0.3 and Epiphany
2.22.3, but does not occur in Konqueror.
This sounds like typical offscreen pixmap problem with X.org drivers.
Try what is
On Sun, 12 Oct 2008, Mike Hommey wrote:
On Sat, Oct 11, 2008 at 10:02:03PM -0700, Mark Hedges wrote:
Yes, adding
Option AccelMethod XAA
to the driver section worked. I did not have to add
Option XaaNoOffscreenPixmap on
It was reverted because XAA breaks Xv. Which means EXA
On Tue, 14 Oct 2008, Mike Hommey wrote:
packages depending on the architecture you are using:
http://people.debian.org/~glandium/xulrunner-1.9_1.9.0.3-1.0.1_amd64.deb
http://people.debian.org/~glandium/xulrunner-1.9_1.9.0.3-1.0.1_i386.deb
Unfortunately, people.debian.org went down...
The latest libcairo2_1.6.4-6.1 did not contain this fix. I
had to downgrade using your packages.
Any chance your patch to libcairo2_1.6.4-6.0.1 can make it
into the next upgrade?
Mark
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
On Mon, 20 Oct 2008, Dave Beckett wrote:
I don't now where this fix that was in Mike's build called
libcairo2_1.6.4-6.0.1 came from. It's not in the #495620
comments and I don't have the source to this build either.
So those are reasons enough for not including it; apart
from not wanting
Actually it happened whether I used the intel driver or the
generic driver, framebuffer or not.
But I just re-installed and now it is fine. Weird.
Mark
On Sun, 24 Aug 2008, Brice Goglin wrote:
Mark Hedges wrote:
Package: xserver-xorg
Version: 1:7.3+15
Severity: grave
Justification
Package: apache2.2-common
Version: 2.2.3-4+etch5
Severity: important
etch version of /etc/logrotate.d/apache2 should use reload, not restart.
Otherwise a site with an SSL cert that uses a passphrase will not restart.
This renders SSL certificates with passphrases useless under default config.
Package: splashy
Version: 0.3.10-2
Followup-For: Bug #486400
I also encounter the same problem using either the stock kernel
for 2.6.26 or my own custom kernel when resuming from hibernation.
The normal boot-up splash screen works fine and prompts me for
the passwords to the encrypted
Package: splashy
Version: 0.3.10-2
Severity: normal
I have two kernels on my machine, the stock kernel and a
custom kernel. I had the custom kernel running when I
installed splashy. It correctly loaded the splash screen
at boot time because initramfs was rebuilt. However, the
stock kernel
Also see 497313. When splashy was installed running under my
custom kernel, initramfs for the stock kernel was not
rebuilt due to that bug.
So when I booted under the stock kernel, splashy never
loaded until after I unlocked the encrypted drives and
normal boot began.
Resume from hibernation
I was going to write that this was an update-initramfs
problem, but I just found in the manpage that one can call
update-initramfs -u -k all to update initramfs for all
kernel versions. I guess splashy should do this?
Yeah I saw that too after I filed. Makes sense to me. If I
installed
On Tue, 2 Sep 2008, Tim Dijkstra wrote:
Well, this is what splashy used to do, but there were complains about
this. Some people want to keep old initramfses around which are known to
work. Also updating all initramfses could potentially take a very long
time. It is now agreed, that all
As I said, there is the possibility to configure
initramfs-tools to rebuild all initramfses on removal, why
isn't that a solution for your use case?
Oh I see, I didn't get that. That would work.
Maybe a debconf option for Splashy that lets the user choose
to configure it that way
Package: xserver-xorg
Version: 1:7.3+15
Severity: grave
Justification: renders package unusable
I just installed lenny with the netinst installer on a Thinkpad X61.
All the fonts are blank. gdm or kdm. I log into gnome and the fonts
and menus are all blank. I can click on the menu, and the
Package: console-tools
Version: 1:0.2.3dbs-65.1
Severity: normal
I just made a brand new install of lenny using netinst on my Thinkpad
X61. (My hard drive died and I had to reinstall.)
The bottom pixel line of the capital S is blank on the console.
I don't know if it's related, but I also
Package: eog
Version: 2.22.3-1
Severity: wishlist
In the Sarge version of eog there was a gallery view option
that was immensely useful when browsing a gigantic directory
of icons. Please bring back this wonderful functionality. :-)
It arranged a grid of thumbnails that grew with window size
Package: eog
Version: 2.22.3-1
Severity: normal
I wanted to browse the theme pngs from pkg 'splashy-themes'
to figure out which one I wanted.
[EMAIL PROTECTED]:/etc/splashy/themes$ eog `find . -name *.png*`
There's no way to tell which 'background.png' I'm looking at
when the pictures load.
On Fri, 5 Sep 2008, Josselin Mouette wrote:
Upstream replied:
That's a decision design and the gallery view won't come back
again. However, if you want you can set the gconf
key /apps/eog/ui/image_collection_resizable to true to use a
multirow approach. See
It has been decided that this won't be changed in etch
(because reload had different problems at the time).
However, the problem and the fix is already documented in
README.Debian.
Indeed it is. Which is what I figured out to do.
Am I going to run into these unspecified problems with
On Fri, 5 Sep 2008, Stefan Fritsch wrote:
Am I going to run into these unspecified problems with
reload? It's just a PHP site with a few perl CGI's and no
mod_perl handlers.
Uhh... Possibly.
Some apache child processes may hang on reload. After many reloads,
you may run into the max
Package: gimp
Version: 2.4.6-1
Severity: normal
It used to be, that if I selected something and did Copy, or if
I copied an image out of the browser or another program, that
then if I created a new document, the image size dimensions
would already be set to an exact rectangle that fit the
Package: eog
Version: 2.16.3-3
Severity: wishlist
Please bring back the gallery view of etch eog. It is no fun
to do eog `find /usr/share/icons -type f` or something
like that when you can only see one line of thumbnails. thx! -m-
-- System Information:
Debian Release: 4.0
APT prefers
The problem I have is similar. In my case, my VPN provides an
internal search domain blah.local and an internal DNS server for
answering queries about internal server addresses, i.e. the servers
inside the VPN where I do my work.
With resolvconf package installed, VPN DNS settings never appear
Package: gnome-applets
Version: 2.14.3-3
Severity: minor
Create a weather applet on a vertical panel. The temperature
is next to the icon as it would be on a horizontal panel.
Move the applet to a horizontal panel, then back to the vertical
panel, and it corrects itself. (After creating, it
Package: cdrecord
Version: 9:1.1.0-1
Severity: important
Put in a cdrom. Tried right click, Copy Disc... to file image.
Choose a filename, then File image creation failed - Could not
run sub process: Failed to execute child process readcd
(No such file or directory). Click OK and cdrom
Incidentally, doing `ln -s /usr/bin/readom /usr/bin/readcd` does make it
work, but I couldn't find any new version in unstable or experimental.
-m-
-Original Message-
From: Peter Samuelson [mailto:[EMAIL PROTECTED]
Sent: Monday, December 18, 2006 8:47 PM
To: Mark Hedges; [EMAIL PROTECTED
Package: gnome-utils
Version: 2.14.0.dfsg-4
Severity: normal
On a side (vertical) panel, add items. Add a drawer and a separate
dictionary applet (dict on the panel, not in the drawer.) Open the
drawer and middle-drag the dict applet into the drawer. When it
loads into the drawer, the button
Package: libspreadsheet-parseexcel-perl
Version: 0.2603-3
Severity: wishlist
Spreadsheet::ParseExcel::Simple builds easily with dh-make-perl
and would be a nice addition to the package.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Package: apache2-utils
Version: 2.2.3-4+etch4
Severity: normal
Version 2.2.3-4+etch4 of apache2-utils contains an `htpasswd`
that does this:
[EMAIL PROTECTED]:~$ htpasswd -mbn foo bar
foo:$apr1$.C9HN...$VJYoF1cM6sqQkjgiltBWA1
[EMAIL PROTECTED]:~$ htpasswd -mbn foo bar
Please upgrade libgtkhtml3.8-15 as well :)
Cheers,
Heikki
I filed a bug report this morning when evolution broke after an upgrade.
Should have looked first. Using the unstable version of libgtkhtml3.8-15
fixed it.
I guess evolution-2.4 should not have moved to testing while depending
Package: electricsheep
Version: 2.6.5-1
Severity: grave
Justification: renders package unusable
Got 2.6.5-1 in a dist-upgrade when migrated to testing.
Now it won't run.
xscreensaver reports child pid 0208 (electricsheep) terminated
with signal 9. Running from the command line just says
On Sat, 29 Apr 2006, Jonathan Kleinehellefort wrote:
I ran into the same problem and think this cannot be considered a bug.
/usr/lib/yaird/exec/run_init is really complaining about /dev/console
missing on the new cryptoroot, which is caused by this step:
cp -ax / /mnt
Because a
Package: yaird
Version: 0.0.12-3
Severity: important
To summarize:
EXT3-fs: mounted filesystem with ordered data mode.
Switching root ...
/usr/lib/yaird/exec/run_init: opening console: No such file or directory
Kernel panic - not syncing: Attempted to kill init!
This is the beginning
On Fri, 3 Mar 2006, Jonas Smedegaard wrote:
On Thu, 2 Mar 2006 19:52:37 -0800 (PST)
Mark Hedges [EMAIL PROTECTED] wrote:
I do get a prompt to type the luks password. Yay!
But immediately I see:
EXT3-fs: mounted filesystem with ordered data mode.
Switching root ...
/usr/lib/yaird/exec
On Fri, 3 Mar 2006, Mark Hedges wrote:
EXT3-fs: mounted filesystem with ordered data mode.
Switching root ...
/usr/lib/yaird/exec/run_init: opening console: No such file or
directory Kernel panic - not syncing: Attempted to kill init!
It would appear that yaird is not putting the console
Package: gksu
Version: 1.2.5-3
Severity: important
From an etch system, I try to get into this host as follows:
ssh -X myhost gksu --ssh-fwd cmd
Regardless of cmd (gnome-terminal, gvim, echo foo, whatever),
this causes a massive amount of network traffic that brings my
local machine to a
Package: gnome-panel
Version: 2.14.1-1+b1
Severity: normal
Upon this upgrade, the transparency yields a bad color if my
desktop background is set to vertical or horizontal gradient
or any background image that sets a gradient background beneath.
It is usually a poo-brown or vomit-green, of
There is no need for this bug report. Before this worked for me because I had a bash alias 'perlc' that is 'perl -c' and so it tries dir/filename completion fine.
Mark
This email message is for the sole use of the intended recipient(s) and may contain privileged information. Any
There is no need for this bug report. Before this worked for me
because I had a bash alias 'perlc' that is 'perl -c' and so it
tries dir/filename completion fine.
Mark
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: groff-base
Version: 1.18.1.1-12
Followup-For: Bug #334210
I don't think it should try to be clever and rewrite man pages
with curly-quotes in utf8. For code examples and tutorials, this is
horrendous, for example copying/pasting SQL examples from man pages.
I think if the authors
Package: man-db
Version: 2.4.3-3
Followup-For: Bug #354418
If you change your LANG to en_us.ISO-8859-1, it works fine.
It is a problem in groff-base under unicode. Someone tried to
get clever. But it should never do that for preformatted
sections and code especially. It screws up
On Tue, 23 May 2006, Alexis Sukrieh wrote:
I just installed a fresh new etch system (in a vserver) and
installed xscreensaver and electricsheep. I'm surprised, I cannot
reproduce that bug.
Everything goes fine on my etch system.
Anyway, I know that 2.6.5 (the version in etch) is affected
On Thu, 3 Apr 2008, Michael Biebl wrote:
hedges wrote:
Package: network-manager
Followup-For: Bug #465471
I have to run my firewall script manually after the interface
wlan0_rename comes up and the applet tells me it's connected.
Do you rename your interface by udev? wlan0_rename
Given that evidence proves this does not happen for everybody (/me
included), I see no real reason for this bug to be release
critical. It fits the definition of important.
Sure okay, didn't know what to choose.
Is that fully reproducible on your system.
Yes, it happens every time now.
On Fri, 4 Apr 2008, Michael Biebl wrote:
Mark Hedges wrote:
On Thu, 3 Apr 2008, Michael Biebl wrote:
I have to run my firewall script manually after the interface
wlan0_rename comes up and the applet tells me it's connected.
Do you rename your interface by udev? wlan0_rename should only
On Fri, 4 Apr 2008, Mark Hedges wrote:
# PCI device 0x8086:0x4227 (ipw3945)
SUBSYSTEM==net, DRIVERS==?*, ATTR{address}==00:1b:77:7c:9a:a5,
NAME=eth2
I removed ipw3945d, which was still trying to run and failing
because I've switched to iwl3945 driver, but this line remains the
same
Yes, it happens every time now.
It does not happen at all now. I recompiled my kernel. I had not
checked before under 2.6.24-686-1 but that works fine, and my custom
kernel works fine too. But it worked fine before. Close the bug I
guess. If you don't mind, please tell me where the core
On Sat, 5 Apr 2008, Michael Biebl wrote:
to send DNS requests through lo and eth1. Now for some reason it is
trying to start network services and do DHCP at boot again. Is
there some package doing that which I should remove?
Check, if you have configured your network interfaces in
On Tue, 8 Apr 2008, Marco d'Itri wrote:
Since the udev: rename wmaster0 to eth2 hangs for 20 seconds or so
at boot time, and both eth2 and wlan0_rename show up in ifconfig,
could this be a bug with iwl3945 or with udev? If the interface
What happens if you move away
Package: update-manager
Version: 0.68.debian-7
Severity: normal
When update-manager is running in a window, downloading files,
the icon in the tray is grey instead of orange. It seems like
clicking on the icon at that time should focus the existing
window instance of update-manager instead of
Package: gnome-themes
Version: 2.26.2-1
Severity: normal
I recently upgraded to squeeze. I'd never selected any theme, used
default theme. I tried darklooks, but after coming back from suspend,
the text of icons was the wrong color, and sometimes flipped colors
on mouseover. Also, iceweasel
On Tue, 22 Sep 2009, Josselin Mouette wrote:
Most likely a X bug. What is your graphics hardware and
what driver are you using?
OK, but it never happened until I applied a theme.
Maybe it is related to the offscreen pixmaps bug in the
intel driver, I still have the fix enabled in xorg.conf.
BTW It doesn't help to turn all of those options off in the
device section. I guess I will see if there's a bug under
the driver that covers this and move the bug.
Mark
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Package: openssh-server
Version: 1:5.1p1-5
Severity: minor
hed...@li16-163:/etc/ssh$ sudo grep PermitRootLogin sshd_config
PermitRootLogin no
Yet, logwatch report says this:
- pam_unix Begin
cron:
Sessions Opened:
mail: 98 Time(s)
Package: iceweasel
Version: 3.0.14-1
Severity: normal
https://bugzilla.mozilla.org/show_bug.cgi?id=519763
dark linux gtk theme makes pages look bad; use system colors should apply to
input elements as well as fonts, or separate option needed
In Gnome (Debian Squeeze) I use a modified
Package: gtk2-engines
Version: 1:2.18.2-1
Severity: normal
Themes installed with Gnome Art Manager (such as the eMaCs desktop theme)
are not selectable from the Appearance control panel. If I choose
customize I can select the theme as a base, but then it has the warning
This theme will not look
I am having the same problem trying to use rezound to open a
.flac file recorded with gnome-sound-recorder. However, I
cannot open the file in `snd` either: can't translate:
can't translate
/home/hedges/Desktop/music/home-on-the-range-1.flac
(Flac header: unknown (0x0) data format) with some
Package: denemo-data
Version: 0.8.16-1
Severity: minor
I loaded /usr/share/denemo/soundfonts/A320U.sf2 into rosegarden via
FluidSynth-DSSI to try out the sounds. Most of them work (they are great!) but
it seems like most of the instruments in bank 128 are actually the same plain
tom, except
I mean they are all the same percussion set. --m--
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Subject: system-config-printer-udev: window manager hook to authorize
configuration
Package: system-config-printer-udev
Version: 1.2.3-3
Severity: wishlist
*** Please type your report below this line ***
If I could set an option for a box to pop up and ask configure printer?
with the
I use a proxy with 3.5.15 (Squeeze) and get a totally
informative message when the proxy is off-line. Should this
be closed?
Mark
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
found 587672 3.5.15-1
thanks
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: iceweasel-dbg
Version: 3.5.15-1
Severity: normal
I installed iceweasel-dbg to test a problem.
hed...@maggie:~$ iceweasel -g
/usr/bin/iceweasel: line 122: gdb: command not found
Mark
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990,
Package: xul-ext-noscript
Version: 1.9.9.69-1
Severity: normal
I was trying to figure out why Facebook stopped working a couple
days ago. All the ajax component buttons were broken-- sending
the message, posting a status, deleting a status-- and also little
things like auto-expansion of text
Weird, now about:blank still appears in the NoScript menu
when I'm logged onto Facebook, but the FB system ajax
buttons work even if I do not enable about:blank.
Mark
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
If I restrict about:blank, then go to news.google.com, the
'fast flip' section gets blocked by NoScript. When I click
on it, NoScript alerts Temporarily allow about:blank
(OBJECT, text/html) with cancel/OK.
I think this means publishers have found a way to bypass
noscript, since if everyone
Package: electricsheep
Version: 2.7~b12+svn20091224-1+b1
Severity: important
When Squeeze became stable, electricsheep stopped working as a
gnome screensaver. The screen is just blank when the screensaver
is activated.
All other screensavers appear to still work. In the gnome
screensaver
I've been having this problem too, just the last few weeks.
I have to kill the python process. I also see the same
error in .xsession-errors.
Mark
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Why do three `python hp-systray` procs get started anyway.
I guess each one tries a lock after the fork, instead of the
parent locking before the fork, and probably someone
expected that doesn't matter because they assumed the child
processes would get around to locking the file after the
parent
Update manager stopped letting me uncheck something. Maybe
that's another bug. So I did a dist-upgrade and then tried
to go back to the libcairo2-6.0.1 package that Mike Hommey
distributed. Most sites are okay, but not everything - now
Iceweasel omits some of the borders of simple tables
Package: libapache2-mod-perl2-doc
Version: 2.0.4-4
Severity: normal
The doc package for the mod_perl v.1 has all the HTML of the docs
at http://perl.apache.org/. That package is not available in Lenny.
Please include the HTML docs in libapache2-mod-perl2-doc. Thanks!
Mark
-- System
I guess you're right that no more work-arounds should be
applied without fixing the driver. It looks like they
closed the bug in xserver-xorg-video-intel because it
stopped happening. Using the xorg.conf workaround of
Option XaaNoOffscreenPixmaps on
... is not really a fix either.
All the
Package: ttf-tuffy
Version: 20071106-1
Severity: important
I verified that closing curly quotes ('”') print in a sample
of other fonts, berylium, liberation serif, default times new roman.
Only Tuffy does not print them. They still show on the screen, though.
How is that possible?
Single
Package: grub2
Severity: wishlist
It would be great for the grub2 switchover if it first offered
the option to format a cd-rom or usb stick which would restore
a backup of the old boot partition if grub2 doesn't work.
Mark
-- System Information:
Debian Release: squeeze/sid
APT prefers
On Sun, 2 Aug 2009, Felix Zielcke wrote:
tag 539648 wontfix
thanks
Am Sonntag, den 02.08.2009, 10:36 -0700 schrieb Mark Hedges:
It would be great for the grub2 switchover if it first offered
the option to format a cd-rom or usb stick which would restore
a backup of the old boot
On Mon, 3 Aug 2009, Fabian Greffrath wrote:
If it appears on screen but not on a printout it's most
probably not a bug in the font itself, but I'd like to try
out your example file first.
tuffytest.odt
Description: tuffytest.odt
Package: gnome-terminal
Version: 2.26.2-2
Severity: important
Apologies if this is not the source of this bug but it's
the only place I see it. This doesn't make a lot of sense.
I first encountered this problem on a buggy wireless at a cafe.
Now I'm having it at home.
I can't explain this:
Package: libsword8
Version: 1.6.0+dfsg-1
Severity: normal
I do need to fix my firewall and this is a great opportunity
to do so, but often people do not have control over their
firewalls and only passive FTP connections work. It might
be a good idea to send the PASV command in the ftp
close 539794 libsword8
--
I block unknown outbound connections from my machine that
are not state RELATED,ESTABLISHED. This has always worked
before, and worked fine with gnomesword in lenny.
Hrmm, I will try it with the updated kernel package, I
compiled this kernel under lenny and upgraded
On Tue, 4 Aug 2009, Emilio Pozuelo Monfort wrote:
reassign 539784 general
thanks
I get the same in an xterm. Not a gnome-terminal bug.
Yeah on the console too. Is it a network-manager problem
maybe? I use iwl3945 - it is definitely broken at Brendan's
Bakery on Mission in Santa Cruz -
Package: gnome-control-center
Version: 1:2.26.0-1
Severity: normal
I dragged a tab from iceweasel onto the desktop which created
a url shortcut. But when I double-click on the icon, it opens
with epiphany-browser. However, Preferred Applications panel
lists Iceweasel (`iceweasel %s` greyed out
Where do I file bug reports about my brain?
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: network-manager
Version: 0.7.1-1
Severity: important
No scripts in if-pre-up.d or if-post-down.d are running.
Scripts in if-up.d and if-down.d run fine.
Example, try this script in each directory chmod 755 chown root:root:
#! /bin/sh
/usr/bin/logger -t LAME LAMER
/usr/bin/logger -t
Package: acpi-support
Version: 0.109-9
Severity: normal
At times I have experienced acpi bugs which cause the system to crash
during hibernation or suspension. While these bugs eventually get
fixed, or cannot be repeated for unknown reasons, they cause data loss.
As a measure to prevent data
I had downgraded back to 2.6.27 to make it work at
linode.com. I just upgraded and do not see that error
booting 2.6.32. Thanks. --mark--
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
On Tue, 9 Feb 2010, Michael Biebl wrote:
So, we really have two separate issues here, thus I cloned
the bug to handle them separately:
1.) network-manager does not support pre-up/pre-down
scripts
Right, see https://bugzilla.gnome.org/show_bug.cgi?id=387832
2.) the current 01ifupdown
On Tue, 9 Feb 2010, Michael Biebl wrote:
However, I would guess it is still more useful for most
packages to run if-down.d scripts instead of
if-post-down.d, if only one of them is going to run.
Not exactly sure what you mean by that. Would you please elaborate.
I see. Maybe I'm the
On Tue, 9 Feb 2010, Michael Biebl wrote:
The if-down.d hooks were written under the premise that
the network is still up, which it currently in NM's case
is not.
But to have a better answer to this question, I guess one
would have to analyze the existing ifupdown hooks in
Debian and check,
On Tue, 9 Feb 2010, Michael Biebl wrote:
/etc/network/if-up.d/debug
PHASE=post-up
You see, there is no down resp. up PHASE for the hooks in there.
Maybe you also understand, what I mean with that the names of the hook
directories do not reflect the PHASE variable.
Yes okay. Either way it
Package: network-manager
Version: 0.7.2-2
Severity: important
https://bugzilla.gnome.org/show_bug.cgi?id=605579
nm_device_state_changed() in src/nm-device.c waits until the interface goes
down to call nm_utils_call_dispatcher(down,...).
As a result, scripts in /etc/network/if-down.d do not
On Mon, 28 Dec 2009, Mike Hommey wrote:
On Thu, Dec 24, 2009 at 08:50:01AM -0800, Mark Hedges wrote:
On Thu, 24 Dec 2009, Mike Hommey wrote:
There were two levels to this problem, and one of them
is gone: GTK elements *can* be styled with CSS since
version 3.5, see the attached
Package: iceweasel
Version: 3.5.6-1
Severity: normal
https://bugzilla.mozilla.org/show_bug.cgi?id=537004
While debugging http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=549371 it was
suggested I add some ui prefs to user.js which are listed at
http://www.mozilla.org/unix/customizing.html#ui .
On Mon, 28 Dec 2009, Mark Hedges wrote:
Any idea how I can restore Iceweasel's menus without
deleting my whole profile and losing my preferences,
passwords, cookies etc.?
Aha these were assimilated into prefs.js because they had no
defaults there.
https://bugzilla.mozilla.org/show_bug.cgi
On Thu, 24 Dec 2009, Mike Hommey wrote:
There were two levels to this problem, and one of them is
gone: GTK elements *can* be styled with CSS since version
3.5, see the attached file, for example. It means you can
do something by editing the userContent.css file in your
profile.
I hope this
1 - 100 of 298 matches
Mail list logo
