,
sometimes kmail deactivates itself without any reason. This behaviour
seems to show, whenever an email arrives with no subject. This behavior
shows randomly, not always.
Best regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: linux-image-2.6.14-2-amd64-k8
Version: 2.6.14-6
Severity: critical
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux
Am Dienstag, 25. Oktober 2005 11:31 schrieb Gerd Knorr:
What do I have to do ? I have to force the module to a special tuner,
and the pll. Any clue ? Or did I understand something wrong ?
I couldn't say. Gerd, do you have a pointer to some documentation that
might help Hans?
Oh well
and thanks to your help, I could find the reason why !
Thank you very much indeed !!!
Best regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
to be loaded.
I confirmed, to have the newest firmware. With 32-bit-systems the module
and the same firmware runs fine (tested with knoppix, kanotix and whax)
So I suppose, this might be a bug, when compiled for 64-bit-systems.
Thanks for help and best regards
Hans
--
To UNSUBSCRIBE, email
], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Hello dear maintainers,
I use usermin-forward, and it will not switch to German.
Only some descriptions changed, but not all.
Best regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
with udev, my tv card is older, the tuner is
a pal tuner (must be type=5 , pll=2).
I suppose, it is a bug in tuner.o. If it is not, please drop me a line,
so I will look for the mistake here.
Best regards and thanks
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
Am Mittwoch, 6. Dezember 2006 22:57 schrieb Jose Carlos Medeiros:
Hi, Hans
I updated my webalizer package from Testing/Etch and works.
Maybe for a while webalizer wasnt in testing. Because a RC bug.
Can yout test again ?
Regards
Hi Jose,
you asked, if I upgraded or installed new: I did
Der Wohltaetigkeitsfonds Leaming Charity wurde 2001 nach den beruehmten
Explosionen am 11 September
in New York gegruendet. Zuerst war er vorlaeufig und sammelte nur Gelder fuer
die Opfer der Terrorakts,
nach 2 Monaten erwies er sich als sehr erfolgreich und erweiterte seine
Taetigkeit in der
in an older version and was fixed meamnwhile. Now this bug
appears again. In my case the language of the site: http://www.debian.org
should be displayed in German, but it is displayed in English.
Maybe it is the same reason as some months ago ?
Best regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL
regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
(--configure):
subprocess post-installation script returned error exit status 1
Errors were encountered while processing:
flashplugin-nonfree
--- snap --
If I am wrong, please let me know.
Regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
Am Sonntag, 25. November 2007 schrieb Rob Andrews:
On 25-Nov-2007 10:40.45 (GMT), Hans wrote:
nspluginwrapper: no appropriate viewer found for
/usr/lib/flashplugin-nonfree/libflashplayer.so
Hi Hans,
Do you have a chroot?
If so, can you update it and retry the operation?
Kind regards
Please add:
# Brother MFC 210C
SYSFS{idVendor}==04f9, SYSFS{idProduct}==018c, MODE=0664,
# GROUP=scanner, ENV{libsane_matched}=yes
File /etc/sane.d/dll.conf
Please add:
brother2
Thank you very much !
Best regards
Hans
FYI: The scanner driver and the printer driver are working very well on
amd64
to reinstall (case the binary was defective), but with no success.
Maybe some libs are incompatible. This only effects the 64-bit wapua.
Regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
and it works.
(Could it be the reason, that I have now /var on an encrypted partition ??)
Regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
suppose, you might already know it, but wine crashes with segfault on
amd64-system. I checked the original sources from winehq, to, but got the
same result.
At the moment, I can not tell any more, that would help.
Regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
maintainers, sorry to report, that the latest version is still crashing
with segfault on amd64-systems.
Please feel free to ask for more information. I will help, as much as I can
!
Best regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble
it
is no use for me, to upgrade to a newer kernel. Sorry for that !
Thanks for your help !
Best regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
for your help !
regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
/dev. Might be, it will work.
Thank you for youre work !
Best regards
Hans-J. Ullrich
--
Firma
Ullrich-IT-Consult
Inh.: Hans-J. Ullrich
Münstedter Weg 10
31246 Oberg
Tel.: 0160 8156 079
www: http://www.ullrich-it.de
Ihr Berater für Ihre IT-Probleme !
and thank you very much for your work in the past and
the future !!
Hans-J. Ullrich
--
Firma
Ullrich-IT-Consult
Inh.: Hans-J. Ullrich
Münstedter Weg 10
31246 Oberg
Tel.: 0160 8156 079
Ihr Berater für Ihre IT-Probleme !
holes appear)
Thank you for your help and (if I am wong with critical) your patience.
Kind regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
and
without no errors.
Please contact me, if I can help you.
Best regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
.
-- no debconf information
Dear maintainers,
in the last version the script powerbtn.sh is missing. What is the reason
for it ? If it was forgotten, please change it in the next version.
Thanks !
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
protheus2 snort[7724]: FATAL ERROR: Failed to load
//usr/lib/snort_dynamicengine/libsf_engine.so:
///usr/lib/snort_dynamicengine/libsf_engine.so: wrong ELF class: ELFCLASS32
snap
Thank you !
Best regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
-- snap ---
It looks for me, that there are some problems with the rights.
If I am wrong with the package kdebase, please forward this report
to the maintainer(s) with the correct package.
Thank you !
Regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
.
Regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
package.
Thank you for your help !
Regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
=scanner
You get idVendor and idProduct by using lsusb.
The same report was sent to udev. It can be deleted there.
Thanks for all ones , who helped me , to find this bug.
best regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
{idProduct}==018c, MODE=664,
# GROUP=scanner
idVendor and idProduct you will get when making lsusb in console.
Thanks for everyone, who helped me to find this error !!!
Best regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
other programm on my system is able to print.
The printer is a Brother DP-115C.
Please feel free to contact me for further information.
best regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
recommends no packages.
-- no debconf information
Error Description: udev version 0.100 inhibits loading of firmware for
broadcom wireless card bcm43xx (kernel module) and breaks the
dhcp-function.
The version 0.93 was o.k. !
If you need more info, please feel free to contact me.
Regards
Hans
Package: linux-image-2.6.17-2-amd64
Version: linux-image-2.6.17-2-amd64
Severity: normal
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux
will not be confused. :)
Thanks for your attention and your work !
Regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
might be in the
kernel-headers itself.
With older kernel-headers all nvidia-kernel-sources are compiled perfectly.
Thanks for your help !
Regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
inhibit to compile NON-GPL-software.
Please feel free to contact me for any further information.
Best regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
version (100.14.11-1) on a 32-bit-system is working perfectly.
Thank you very much for your attention.
Best regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
?
Blackdown ? Sun ?
If you do need some more information, feel free to email me.
Thanks for your work anyway !!!
Best regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
, too. They are not. They are falling back to English,
too.
Thanks for help !
Best regards
Hans
:wq!
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
processing:
elilo
E: Sub-process /usr/bin/dpkg returned an error code (1)
protheus1:/home/ullhan63#
snap ---
Anyway, I uninstalled it. But I suppose, you should know the bug.
regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble
, that the cache is very, very slow read by
aptitude.
I cannot say, what the is reason for this behaviour. But I can
see, something is working not as normal, although all functions of aptitude
seem to work fine.
apt in the commandline is working o.k.
Regards
Hans
--
To UNSUBSCRIBE, email
need more information.
Best regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
while processing:
linux-image-2.6.22-1-k7
kqemu-modules-2.6.22-1-k7
E: Sub-process /usr/bin/dpkg returned an error code (1)
protheus1:~#
--- snap ---
Thank you very much for youre help !
Best regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
(I have a German environment). I know, I can somehow
change to English environment (something like LANG=C nessus ???), but I
forgot, how, sorry.
This error appears ONLY in Debian-amd64 !
Thank you very much for your help.
Regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
files, and never manually changed the rights. Which
one is correct ?
Regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
mails might cause the bugs. Again, I had no success.
Hint: These bugs seem to be in kmail already since a long time, as mails in
~/Mails/trash are pretty old. It was just random, I discoverd the bugs.
Please feel free to ask for further information.
Best regards
Hans
will not
start. Downgrade to the testing version works.
2. The latest version to get access should be (as reportbug says)
3.0.0.dfsg-2, but I only can download dfsg-1
Thanks for your help !
Regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
to libopenh323 ans libpt (1.8.2 - 1.8.1) ,
apt wants to deinstall libplugin-xxx, too. Reason: libplugin-xxx requires
version 1.8.2 , NOT 1.8.1 . So, it is a dependency problem either with
gnomemeeting oder libpt and libopenh323.
There is no workaround yet.
Greetings
Hans
--
To UNSUBSCRIBE, email
0x454d49545f303034 in ?? ()
#390 0x0036313430393431 in ?? ()
#391 0x6e69622f7273752f in ?? ()
#392 0x0061746e6175712f in ?? ()
#393 0x in ?? ()
Does this help ???
Best regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
something wrong ??? I hope not..
Best regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
this.
Am I wrong ?
Best regards,
Hans
+cvs20040610-2 Ukrainian dictionary for myspell
This is the output, when starting nvu in konsole:
/usr/lib/nvu-1.0PR/run-mozilla.sh: line 159: 12733
Speicherzugriffsfehler $prog ${1+$@}
Best regards
Hans
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
parameters, but then
it does not work correctly.
I am using Debian GNU/Linux 3.1 (sid) , kernel 2.6.11
and libc6 2.3.2.dsl-22
Thanks for your help !
Best regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Package: nvu
Version: 0.99+1.0pre-1
Severity: normal
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.11-100-amd64-k8
Locale: [EMAIL PROTECTED],
correctly, since version 2.1
Thank you for your work !!!
Best regards
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
]:~$ qtwengophone
qtwengophone: error while loading shared libraries:
../../../../wifo/phapi/libphapi.so: cannot open shared object file: No such
file or directory
[EMAIL PROTECTED]:~$
So, does this help ?
Cheers
Hans
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble
it changes the setting of all console letters to unreadable signs.
This happens only on 64-bit-machies. The same version on 32-bit works
fine.
Please feel free to ask me for more information.
Best regards
Hans
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
The package cannot be installed, as the package linux-kbuild-2.6.17 is missing
and it is not in the Debian repository.
Regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
Package: kdm
Version: 4:3.5.3-2
Severity: normal
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-1-k7
Locale: [EMAIL PROTECTED],
before, but it still seemed not to be
solved (please feel free to correct me).
With this bug, the package is sadly unusable for me at the moment.
Thanks for any help.
Best regards
Hans
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble
not work at all).
Please feel free to ask for more information, but first of all, I have to
apologize, when my answer will be late ( I am in the hospital for the next 2
or 3 weeks) since tomorrow.
Regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
Package: mysql-server-5.0
Version: 5.0.67-1
Severity: normal
The package should not be checked out to testing or stable.
When using a WHERE claused with COUNT() and no criteria is met, the result
should be 0, not an empty set.
mysql SELECT COUNT(*) FROM user WHERE User='joe' GROUP BY User;
the invitation or the
offering the webcam.
I looked at stdout, but somehow these functions seem to be complete dead.
Pressing the button do nothing. Maybe they were deactivated and compiling?
Please feel free to ask for further information, I will be pleased to help
any way I can.
Best regards
Hans
hints are welcome.
Best regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Hans
(charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash
Hi dear maintainers,
I am missing the scripts wessid-ng and eassid-ng in the debian package.
Would be nice, to add them (they seem to be available in the latest source
package) in the next version.
Thank you for reading.
Regards
Hans-J
this is just a versions problem, not a real bug. Maybe it is possible, just
to change the entry in openoffice.org-kde
to the latest version of openoffice.org and rebuild???
Thanks for the help!
Cheers
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
/kcheckpass manually to 4755 with owner root:root
Thanks for your attention!
Best regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
to the
next it did not work any more.
It would be nice, if you could take an eye on it.
Thank you very much!
Regards
Hans
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
to upgrade to the latest version.
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: ipvsadm
Version: 1:1.25.clean-1
Severity: minor
Tags: squeeze upstream
Currently ipvsadm -L reports the wrong ActiveConn values compared to the output
of /proc/net/ip_vs.
This problem was reported in the lvs-devel mailing list:
-nonfree, too, from multimedia.debian.org, but that
showed no difference.
Do you have any ideas, what might be wrong?
Thank you for your help.
Best regards
Hans
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
be nice, if you could have a look at it.
Thank you very much for your help!
Best regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
be nice.
Best regards
Hans
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
regards
Hans
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: linux-2.6
Severity: normal
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What
information. Any help is very
apreciated.
Kind regards
Hans-J. Ullrich
-- Package-specific info:
** Version:
Linux version 3.2.0-2-amd64 (Debian 3.2.12-1) (debian-ker...@lists.debian.org)
(gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Tue Mar 20 18:36:37 UTC 2012
** Command line:
root=UUID
in the interent, but all solutions exist from
a time, when ia32-libs were aktive = before multiarch!
Thank you for reading this.
Best regards
Hans
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
-glx + libvdpau1 is causing this problem. As nvidia-glx
is proprietrary, maybe libvdpau1 should be fixed or should we wait, if
nvidia fixes theire package?
Thank you for reading this.
Best regards
Hans-J. Ullrich
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
Package: src:linux
Severity: normal
Dear Maintainer,
Dear maintainers,
please open a new bug or reopen #bug 665881, as this bug appears randomly
again and again. I suppose, it is still not solved, as I believed some time
ago.
Thank you for reading this report.
Hans
*** Please consider
in their packages. Would be nice, if you could add them again.
Thank you very much.
Best regards
Hans
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
is installed, I cannot deinstall ia32-libs.
As
you know, ia32-libs are no more needed in multiarch (wheezy and higher, of
course).
Thank you for readinbg it. I guess, you are already working on it.
It is ok for me, to change the status to minor.
Best regards
Hans
--
To UNSUBSCRIBE, email
is, that blind people (and especially blind noobs) need as much guidance and
information as possible. You cannot expect them to read in the internet or
books like seeing people.
Hope this helps a little bit. :)
Best regards
Hans
--
Please make sure that the hardware-summary log file
it. As a result you get a graphical infrastructure of
the network with all hosts and its relationships shown.
There is also an portscanner integrated.
On the other hand it is also useful, when you plan a network or want to
document a known network.
Best regards
Hans
--
To UNSUBSCRIBE
/share/doc-base/kino-
fr: format html already defined.
Registering documents with scrollkeeper...
Errors were encountered while processing:
polipo
snap
Thanks for looking at and reading my message.
Best regards
Hans
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ
or umts-panel for example. You
can see signal strength, send and receive SMS and it is highly configurable.
It is really worth, to take a look at it. Pity that it is orphaned, really!
Thank you for reading this.
Best regards
Hans-J. Ullrich
P.S. my ryportbug does not work, so I had to send
Hans
-- Xorg.90.log --
X.Org X Server 1.15.0
Release Date: 2013-12-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.12-1-amd64 x86_64 Debian
Current Operating System: Linux protheus1 3.12-1-amd64 #1 SMP Debian 3.12.9-1
(2014-02-01) x86_64
Kernel command line
it is a problem with the rights? In former times kscreenlocker_greet got
sticky bit set (rwsr-xr-x with root:root), but now it has rwxr-xr-x with
root:root.
This problem appears on ALL my computers as well as on 32-bit as on 64-bit
systems.
Thank you for reading this.
Best regards
Hans
close this bugreport.
Have a nice day.
Best regards
Hans
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
tell you, you can close this bug.
The bug never appeared here for a long time.
Sorry, I should have reported this a lot earlier, but I almost forgot of this
open bugreport.
As I said: you can safely close this bug.
Thank you for all the help.
Best regards
Hans
--
To UNSUBSCRIBE, email
I have been able to consistently crash/reproduce - see below.
I am using a USB SundTek DVB-C tuner, with user space drivers. When ever I
do a channel installation in MythTV, system crashes half way the channel
scan.
Sep 10 21:19:56 ijntema-svr kernel: [11201.351504] [ cut here
Dear maintainer,
I believe (but not 100% sure) - based on reading on Fritzbox VPN behavior,
that the endpoint has lifetime expired every hour (not sure what exactly
that means).
I cannot judge whether vpnc responds correctly.
Best regards
Hans Yntema
On Sat, May 16, 2015 at 4:51 PM, Debian Bug
.
Is this entry not needed any more?
Thank you for reading this.
Best regards
Hans
I am experiencing same on a stock Jessie, when creating a VM from existing
image (created on a Wheezy system).
Hans Yntema
-a it shows me enp1s0 instead of eth0.
And as enp1s0 is not defined in /etc/network/interfaces, I get the delay.
I could prove:
NO renaming and eth0 = working correctly
renaming eth0 to enp1s0 = no network, delay at boot and ifconfig -a shows
NO eth0 but enp1s0.
Hope this helps
Best
Hans-J
could take a look at it.
At the moment I have to stay at kernel 3.16 due it is not usable for me at
the
moment as this one and another major bug (#792627).
Thank you for any help!
Best regards
Hans-J. Ullrich
Thank you very much.
free to ask for any more information.
And: Thanks for your help!
Best
Hans
P.S. Sorry, sent this mail twice, as I forgot to add the file.
[0.00] Initializing cgroup subsys cpuset
[0.00] Initializing cgroup subsys cpu
[0.00] Initializing cgroup subsys cpuacct
free to ask for any more information.
And: Thanks for your help!
Best
Hans
1 - 100 of 2572 matches
Mail list logo
