Hello,
There are two versions of libbfd in the mirror. They do not conflict with
each other and they have different names.
/debian/hamm/hamm/binary-i386/libs/libbfd2.8.1.0.15_2.8.1.0.15-1.deb
/debian/hamm/hamm/binary-i386/libs/libbfd2.8.1_2.8.1-2.deb
Is this intentional and if not, how do I
Hi,
How can I make a bootable diskette that has a minimal root filesystem on
it (maybe just mount, cp, ps, e2fsck, /etc and probably no networking)??
I know how to make a bootable disk by copying the kernel and using rdev,
however I don't know how I'd place a root filesystem on the diskette.
On Wed, 3 Dec 1997, Unga Synskadade Smaland Blekinge / Peter Nilsson wrote:
Now that I have went over to using PPP over a modem line, I have got some
trouble. The problem is that I have no official hostname. Therefore, I
call my host peter. I have configured smail for Internet site
How can I make a bootable diskette that has a minimal root filesystem on
The debian install disk has some of this functionality. It
prompts you when you first put it in about what you want to do. I think
after the kernel is loaded you have to switch to virtual console 2. I
don't
Dominic Davidson wrote:
Yup. I was checking regularly for the results of the poll. They didn't
have the results of the poll up after it finished, so who knows what
the final results were... apart from those @slashdot.org. Makes it
rather pointless really.
They stopped the poll when redhat 5
Hi,
The ALT key works under emacs when in console mode. But it doesn't work
under X. Is there any reason for this? How can I fix it?
Perhaps I need to use xmodmap? I heard something about a userfriendly
version of this. Does anyone know what it's called?
Thanks,
Mark.
Probably this does not apply to you or it won't solve your problems
(because your SCSI controller is different than mine) but I was
getting SCSI timeouts with 2.0.30 and an Adaptec AHA-2940U with two
hard disks and one DAT tape unit. I was unable to make it work but all
the problem went away when
Hi,
First off: _very_ cool list! Lurking here has been exceedingly helpful.
Hi.
Thanks, we'll keep up :)
We're running Debian 1.3.1 (bo, kernel 2.0.30) on an Intel Premier
PCI II motherboard, with a 90MHz Penti, 32MB, BusLogic BT-948, and
Quantum Fireball Drive. Several times a day
How can I make a bootable diskette that has a minimal root filesystem on
it (maybe just mount, cp, ps, e2fsck, /etc and probably no networking)??
I know how to make a bootable disk by copying the kernel and using rdev,
however I don't know how I'd place a root filesystem on the diskette.
Probably this does not apply to you or it won't solve your problems
(because your SCSI controller is different than mine) but I was
getting SCSI timeouts with 2.0.30 and an Adaptec AHA-2940U with two
hard disks and one DAT tape unit. I was unable to make it work but all
the problem went away when
On Thu, 4 Dec 1997, Martin Bialasinski wrote:
On Wed, 3 Dec 1997, Unga Synskadade Smaland Blekinge / Peter Nilsson wrote:
Now that I have went over to using PPP over a modem line, I have got some
trouble. The problem is that I have no official hostname. Therefore, I
call my host peter. I
Now that I am leaving the Debian leadership, I am embarking on a new project.
Debian is consistently coming in second in popularity polls for Linux
distributions. It's become very successful as a hobby system, and somewhat
acceptable among informed business users. I intend to work on Debian
I have libc4 installed on my Debian system (running the latest from
unstable). How can I find out if any programs depend on libc4, so that I
can remove it if it isn't needed? Or is there a good reason to keep it?
Thanks.
James
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word
On 4 Dec 1997 [EMAIL PROTECTED] wrote:
: Now that I am leaving the Debian leadership, I am embarking on a new project.
: Debian is consistently coming in second in popularity polls for Linux
: distributions. It's become very successful as a hobby system, and somewhat
: acceptable among informed
I wrote a e-mail to gateway2000's tech support team asking them if Linux
was compatible with my Promise Ultra 33 here is an EXACT copy of what was
returned:
Hello Allen,
Thanks for your message. Unfortunatly, Linus has not been tested on any
system that Gateway sells and therefore we off no
Great! thanks!!
I think that will help...
Ricardo
On Wed, 3 Dec 1997, Alan Su wrote:
Debian List wrote (Wed, 3 Dec 1997 17:37:43 -0800 (PST) ):
|Hi,
|
|How can I make a bootable diskette that has a minimal root filesystem on
|it (maybe just mount, cp, ps, e2fsck, /etc and probably no
I don't know about any debian-related command that will produce this
information, but if you search for libc4 in the file /var/lib/dpkg/status
you will find the packages dependent on it.
Thanks,
Dennis
--
dpk [EMAIL PROTECTED], Systems/Network | work: 353.4844
Division of Engineering
William D. Rendahl wrote:
Hi,
First off: _very_ cool list! Lurking here has been exceedingly helpful.
We're running Debian 1.3.1 (bo, kernel 2.0.30) on an Intel Premier
PCI II motherboard, with a 90MHz Penti, 32MB, BusLogic BT-948, and
Quantum Fireball Drive. Several times a day we
An innocent mistake made by a rep who supports Windows. Funny that you
mention, you just reminded me a post on usenet few years ago by a linux
user who wrote this on the Subject line:
Help! How do I download Linus
On Wed, Dec 03, 1997 at 09:53:13PM -0700, Allen Burns wrote:
I
Dear Debian Users,
Sorry about that partial message. Telnet over a radio modem fails sometimes.
It's real nice to be on the net with no wires, though.
As I was saying, now that I am leaving the Debian project leader
position, I want to work on commercialization. Debian consistently comes
in
Fuzzy wrote:
On Wed, 3 Dec 1997, Allen Burns wrote:
Date: Wed, 03 Dec 1997 21:53:13 -0700
From: Allen Burns [EMAIL PROTECTED]
I wrote a e-mail to gateway2000's tech support team asking them if Linux
was compatible with my Promise Ultra 33 here is an EXACT copy of what was
George Bonser wrote:
Notice the 'Linus' ?? What the h*ll was he somking? Crack?
--
Look, they are operating under very tight margins. They can not go around
hiring COMPETANT people or they would soon eat up all of their profits by
PAYING them.
Ask them why they do not
On Wed, Dec 03, 1997 at 11:32:03PM -0500, James Dietrich wrote:
I have libc4 installed on my Debian system (running the latest from
unstable). How can I find out if any programs depend on libc4, so that I
can remove it if it isn't needed? Or is there a good reason to keep it?
You could just
[EMAIL PROTECTED] wrote:
Dear Debian Users,
[Quoting SCO] 1. Linux has no technical support or maintenance.
I am instituting a 24/7 commercial email support desk for
Huzzah! The more commercial support the better.. It's strange, but
corporations just don't think they're getting
On Wed, 3 Dec 1997, Joey Hess wrote:
They stopped the poll when redhat 5 was released, when redhat had about 50
to 100 more votes in the poll (1 or 2% more of the vote, in other words). The
problem with that poll was, they basically stopped it when they felt like it.
If they had stopped it
Automatiskt svar
Angånde: Problem with IP-Masquerade 97-12-03
Hi Debian folks
I have a problem.. don´t we all..
I have a machine with two netcards, eth0 and eth1
eth0 is connected to the internet with ip:
Hello again!!
Thanks for all the help yesterday! It was very quick!
You were right! I didn't have xbase installed. I installed it and tried to
run startx (without configuring, just to see whether it runs). It didn't,
said it couldn't connect to the server (Or something like that, I'll try to
James Dietrich wrote:
I have libc4 installed on my Debian system (running the latest from
unstable). How can I find out if any programs depend on libc4, so that I
can remove it if it isn't needed?
This may not answer quite the same question, but you can search for a.out
executables:
I agree with you 100%... I sat on a tech support line for 2 hours at a cost of $
35 for networking help in Windows 95. After all of that I ended up fixing the
configuration problem in my networking myself. They tried to convince me it
was my new 200 MMX processor and board that wasn't handling
My father wants to make some changes in his Bussines and I am
trying to get Debian/Linux into those changes.
I will explain myself:
He is going to change his system:
Computer: FUJITSU TITAN2600 (with 24 terminals)
O.S.: PICK O.A. v5.2
With: Terminal based menues for entering,
On Thu, 4 Dec 1997, Wintermute wrote:
William D. Rendahl wrote:
We're running Debian 1.3.1 (bo, kernel 2.0.30) on an Intel Premier
PCI II motherboard, with a 90MHz Penti, 32MB, BusLogic BT-948, and
Quantum Fireball Drive. Several times a day we get messages on the
console describing
On Thu, 4 Dec 1997, Hamish Moffatt wrote:
On Wed, Dec 03, 1997 at 11:32:03PM -0500, James Dietrich wrote:
I have libc4 installed on my Debian system (running the latest from
unstable). How can I find out if any programs depend on libc4, so that I
can remove it if it isn't needed? Or is
G John Lapeyre writes:
On Wed, 3 Dec 1997, Steve Mayer wrote:
Have you checked out the sample configurations in the /usr/doc/majordomo
G John Lapeyre wrote:
I can't seem to get majordomo to work. I don't understand much
about setting uid 's . The following transcript
On 3 Dec 1997 [EMAIL PROTECTED] wrote:
Can anyone give me some feedback on dunc? I'm revising it and would like
to hear opinions on what should be changed. Already planned are pap/chap
support and use of the standard option and chat files.
What version of dunc are you looking at? The last
On 03 Dec 1997 15:43:13 you asked:
Can anyone give me some feedback on dunc?
Several weeks ago I experimented with dunc 1.5. The major bug I
found was in the dialup_connect script. There is what I think is
called a race condition that causes the /bin/rm -f /tmp/wchatfile
to remove
I'm looking for the documentation of outb() and its friends.
man outb(2) claims to document only the extra info to use outb from user
space, and refers to outb(9) but I have no section 9.
The IO port programming mini-HOWTO says There are man pages for these
macros in reasonably recent releases
On Thu, 4 Dec 1997, Fuzzy wrote:
I have slackeware more or less running on 386sx8
and want to install debian 1.3.1 (bo) on a new 6x86 p200+ based system
that will be a server.
I have the 2 CD distribution from lsl.com and the contents of the
stable/non-free directory from an ftp mirror
Orn E. Hansen [EMAIL PROTECTED] writes:
If you have to remove all the classes in c++ to get threads working,
there isn't much sense in using c++ :-)
I've had the same problem, and as far as I've been able to collect,
g++ simply isn't, and won't be thread safe. If you wish for a thread
safe
Daniel Martin writes:
Among other things, the satellite setup makes using fetchmail near
impossible. I personally think that a big warning should be issued if
you choose this option, as people seem to think that it's the appropriate
choice for intermittently connect PPP machines.
It seems
On Thu, 4 Dec 1997, Fuzzy wrote:
and want to install debian 1.3.1 (bo) on a new 6x86 p200+ based system
that will be a server.
I have the 2 CD distribution from lsl.com and the contents of the
stable/non-free directory from an ftp mirror on a ez135 disk, (yes the
new system also has a
William D. Rendahl [EMAIL PROTECTED] writes:
Hi,
First off: _very_ cool list! Lurking here has been exceedingly helpful.
We're running Debian 1.3.1 (bo, kernel 2.0.30) on an Intel Premier
PCI II motherboard, with a 90MHz Penti, 32MB, BusLogic BT-948, and
Quantum Fireball Drive.
On Thu, 4 Dec 1997, Dale Martin wrote:
Orn E. Hansen [EMAIL PROTECTED] writes:
If you have to remove all the classes in c++ to get threads working,
there isn't much sense in using c++ :-)
I've had the same problem, and as far as I've been able to collect,
g++ simply isn't, and won't
Hello!
Can you help me to get documentation for driver writing for NE2000?
I must write driver for it, but I can't find any information for it.
Thanks,
Sergey Zelerny
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
On 30-Nov-97 Matt Thompson wrote:
I seem to be having trouble configuring a custom kernel. The only
kernels that work are on the 'tecra' rescue disk, and the one I got from
Valery Petrov's site, but those don't support fat32 and when I make a boot
floppy from the rescue disk, it loads the kernel
Hi all,
my problem is that I cannot run more than one X server at the same time.
When I am logged in as a user one and run startx on display :0.0, I do
Ctrl-Alt-F2, log in as a user two and type startx -- :1.0
The second X server attempts to start (the gray default background appears)
and gets
Thanks to all who responded to my question.
I was able to delete the file last night by resetting attribute
flags using chattr. The attribute flags on that file were ALL set!
(Actually, this seems somewhat consistent with the group ID getting
mysteriously changed to 65535). No other files were
The SCO letter is just fud. They didn't point out any capability that
Unixware has that linux does not.
Corporations like to have someone to blame. The culture is to make safe
dicisions. Accepting total responsibility for something isn't done very
often. (exceptions are things like process
Last week I issued a plea for help:
I just made a new installation of bo, and emacs no longer seems to
read my ~/.Xdefaults file like it used to in rex.
And Wintermute [EMAIL PROTECTED] came to the rescue:
Try this..
xrdb -merge ~/.Xdefaults
That does the job!
Since it only works for the
Mark Phillips [EMAIL PROTECTED] wrote:
The ALT key works under emacs when in console mode. But it doesn't work
under X. Is there any reason for this? How can I fix it?
Perhaps I need to use xmodmap? I heard something about a userfriendly
version of this. Does anyone know what it's
[EMAIL PROTECTED] writes:
I often have some nfs filesystems mounted on my machine and whenever cron
runs updatedb I end up with a huge mail listing each file on the nfs
filesystems saying permission denied. Is there a way to stop this message
without unmounting the filesystems?
Hi G'razel!
I was wondering if there was a debian package that'd let me do the
following:
I need to get information of bandwidth used over time on our leased ISDN
link... I could stare at 'netwatch' all day and write down the data (where
it says ROUTER), but then I wouldn't be able to get any work done.
Hi,
I got a new message from my kernel today:
Dec 4 13:22:07 garfield kernel: Warning: dev (03:01) tty-count(1) !=
#fd's(2) in do_tty_hangup
anybody knows what this is ?
Thanks
George
[EMAIL PROTECTED] wrote:
What I think he needs:
A PICK interpreter or so.
Something to convert the old data.
Some program to later on replace that PICK interpreter?
Probably some way to keep both systems in parallel.
That sounds like a pretty complete list. However, it's likely to be
On Thu, 27 Nov 1997, Kevin Traas wrote:
Is there a way to crypt a whole e2-filesystem or at least a whole
directories? Or is there any other way to overcome this?
Yes there is. Whether or not Debian has a package for this yet I do not
know, however here is an address that should answer
In order to use the ipfwadm command set, what options and modules need to
be selected in configuring the kernel? I thought I had done this
correctly, but keep getting an error message when I try to use ipfwadm.
The error message is something like SOCKOPT error: protocol not
available.
Mark
On Thu, 4 Dec 1997, Fuzzy wrote:
On Thu, 4 Dec 1997, Daniel Martin wrote:
(about installing the kernel-source package, etc.)
I think the CDs have kernel 2.0.30? we've heard that 0.29 and 0.32
were stable but 30 was a problem, but than again, .deb has local
patches that maybe stablized it?
[EMAIL PROTECTED] wrote:
My father wants to make some changes in his Bussines and I am
trying to get Debian/Linux into those changes.
I will explain myself:
He is going to change his system:
Computer: FUJITSU TITAN2600 (with 24 terminals)
O.S.: PICK O.A. v5.2
With:
Making 2.0.32, from its tarball
gestalt:#make-kpkg kernel_image --revision gestalt.1.5.0
...
cp vmlinux debian/tmp-image/boot/vmlinux-2.0.32
cp System.map debian/tmp-image/boot/System.map-2.0.32
chmod 644 debian/tmp-image/boot/vmlinuz-2.0.32 \
Kevin Traas wrote:
I've been getting the following message in /var/log/messages ever since I
installed qpopper on my system:
Dec 2 13:09:35 inetgw in.qpopper[742]: (v2.2) Unable to get canonical
name of client, err = 0
Everything works fine, but I always get that message - filling up
Stop
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Look at mrtg under 'contrib/net'. This works really nice - running from
crontab, it updates daily, weekly, monthly, and yearly information.
If you want a quick view of it's output see www.egr.msu.edu/~dpk/mrtg
Thanks,
Dennis
--
dpk [EMAIL PROTECTED], Systems/Network | work: 353.4844
Stop
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
On Thu, 4 Dec 1997, Alexander Chepegin wrote:
Stop
done
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Ian Gill Watkins wrote:
I have started receiving this message since installing the remainder / most
of the Debian system.
The domain on my home net is called watkins (original huh?).
I have had a look out on the net and it appears to be something to do with
TCP/IP / DHCP but I could
On Thu, 04 Dec 1997 11:52:38 +0200, Liran Zvibel wrote:
You were right! I didn't have xbase installed. I installed it and tried to
run startx (without configuring, just to see whether it runs). It didn't,
said it couldn't connect to the server (Or something like that, I'll try to
install
robert havoc pennington wrote:
Hi,
I just got a new disk and mainboard (yay!) but I have to do some work
tonight. So I just put my old disk in the new system and booted, and
things are working great (and a whole lot faster - 386-16 to K6).
However, I'd love to have a fresh new install
I am trying to compile perl 5.004.04 and am having problems. My
compiler is unable to locate -lnsl (for some reason). But I'm sure that
the reqd library is in /lib -
$ cd /lib
$ ls -l *nsl*
-rwxr-xr-x 1 root root17448 Jun 5 1997 libnsl-2.0.4.so*
lrwxrwxrwx 1 root root
I've been getting the following message in /var/log/messages ever since
I
installed qpopper on my system:
Dec 2 13:09:35 inetgw in.qpopper[742]: (v2.2) Unable to get canonical
name of client, err = 0
Interesting. I wouldn't think what you did would fix it. The api for
name/IP lookup makes
Matthew Tebbens wrote:
I have 2 harddrives in my system. The main hd is going bad
and I would like to copy everything to the second and use
that as the main drive.
Is it possible to copy EVERYTHING to the second hd and just
run lilo on it ?
If so, anyone know all the options to use with
Hi,
From the /usr/doc/kernel-package/Problems.gz file :
__
c) dpkg-gencontrol fails with the error message
failure: chown new files list file: Illegal seek
This is an error in older versions of dpkg-dev.
William D. Rendahl [EMAIL PROTECTED] writes:
Hi,
First off: _very_ cool list! Lurking here has been exceedingly helpful.
We're running Debian 1.3.1 (bo, kernel 2.0.30) on an Intel Premier
PCI II motherboard, with a 90MHz Penti, 32MB, BusLogic BT-948, and
Quantum Fireball Drive. Several
Orn E. Hansen [EMAIL PROTECTED] writes:
If you have to remove all the classes in c++ to get threads working,
there isn't much sense in using c++ :-)
I've had the same problem, and as far as I've been able to collect,
g++ simply isn't, and won't be thread safe. If you wish for a thread
safe
Daniel Martin writes:
Among other things, the satellite setup makes using fetchmail near
impossible. I personally think that a big warning should be issued if
you choose this option, as people seem to think that it's the appropriate
choice for intermittently connect PPP machines.
It seems
You have not been removed, I couldn't find your name on the list.
If this wasn't your intention or you are having problems getting yourself
unsubscribed, reply to this mail now (quoting it entirely (for diagnostic
purposes), and of course adding any comments you see fit).
Transcript of
On Thu, 4 Dec 1997, Dale Martin wrote:
Orn E. Hansen [EMAIL PROTECTED] writes:
If you have to remove all the classes in c++ to get threads working,
there isn't much sense in using c++ :-)
I've had the same problem, and as far as I've been able to collect,
g++ simply isn't, and won't be
On Thu, 4 Dec 1997, Fuzzy wrote:
and want to install debian 1.3.1 (bo) on a new 6x86 p200+ based system
that will be a server.
I have the 2 CD distribution from lsl.com and the contents of the
stable/non-free directory from an ftp mirror on a ez135 disk, (yes the
new system also has a ez135
On 4 Dec 1997, Larry G. Gariepy Jr. wrote:
I hope I don't sound heretical: I imagine that a lot of people like Linux for
the fact that there is something new to try every week or two. :) (or more
often?) But practically, how often do people think it is worth the trouble to
upgrade major
I follow the Red Hat list on Usenet ... it is a ZOO compared to this list.
Thinking about it, it makes sense. What market is Red Hat aiming at?
People who can't install Linux!
We have a very active mailing list and that somehow reduces Debian posts
in the general linux groups. I
when I'm playing multiplayer quake (1.09) I can't move forwards or
backwards.. I can in single player mode.. My opponents are win95 tcp/ip
with quake 1.06.. is there an incompatibility?
IIRC, there is indeed an incompatibility between 1.09 and earlier
quakes. You or they need to down- or
I hope you can help me find out the origin or how we got this catch 22
phrase?
I would appreciate a respomse from you. I got to you page when I did a
search on catch 22
Thank you in advance.
Ofori Boateng
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED]
Krzysztof,
How did you know that I was trying since yesterday to get this CD-ROM
drive to work in my machine :-)
My 875th sense told me. :-)
It didn't halt it just would not mount.
It halted for me because I mount the cdrom when I bootup...
Thank you very much.
Use the option satellite system.
No - DON'T. Satellite is useful if and only if all the usernames of
any account that will ever receive any mail are either mentioned in
/etc/aliases or match the usernames on your smarthost. Among other
things, the satellite setup makes using fetchmail
I am using the current version of the stable tree (I guess Debian 1.3.1 r6). I
have recently upgraded my video card from an ancient old thing to the Diamond
Stealth 3000 3D. I have used both xf86config and XF86Setup to produce
XF86Config files that provided some usable modes. However, if I
Eloy A. Paris [EMAIL PROTECTED] writes:
Probably this does not apply to you or it won't solve your problems
(because your SCSI controller is different than mine) but I was getting
SCSI timeouts with 2.0.30 and an Adaptec AHA-2940U with two hard disks
and one DAT tape unit. I was unable to make
I successfully reinstalled Debian on my Thinkpad 365XD. This time
I used the Oficial Debian 1.3 CD's from LSL. This worked fine with the Tecra
disks (which maybe should be renamed). Thank you to all who have worked on
Debian (it was sure easier to install 1.3 on this laptop than 1.2 - back
On Thu, 4 Dec 1997, Paul Rightley wrote:
XF86Config files that provided some usable modes. However, if I exit X and
then
restart it (with startx), my machine will hang (i.e. no keystrokes will modify
I've got the same problem with the same video card, and I'm running a
pretty-much
Three people gave me the answer I was looking for. This list is a
godsend.
Thanks everyone...
Thomas.
On Thu, 4 Dec 1997, dpk wrote:
From: dpk [EMAIL PROTECTED]
To: Tommy Lakofski [EMAIL PROTECTED]
Cc: Debian User List debian-user@lists.debian.org
Date: Thu, 4 Dec 1997 13:36:32 -0500
I notice that MIT now has a Linux build for PGP5.0
US version. I know that there is a PGP Debian package
available internationally, but not on the US site.
Anyone know if a U.S. PGP package for Debian will be
created?
Curt-
--
---
Curt Howland [EMAIL PROTECTED] http://www.Priss.com
The
Hi all,
I guess this doesn't pertain specifically to Debian, but I have a
philosophical question about software upgrades, and I just thought I would take
a poll to see what Joe Debian User (or Jane Debian-User) thinks...
So I bought a new machine in October, and from the outset I wanted
--- Keith Holler wrote:
I agree with you 100%... I sat on a tech support line for 2 hours at a cost of
$
35 for networking help in Windows 95. After all of that I ended up fixing the
configuration problem in my networking myself. They tried to convince me it
was my new 200 MMX processor and
Debian libc5 to libc6 Mini-HOWTO
Scott K. Ellis, [EMAIL PROTECTED]
$Id: libc5-libc6-Mini-HOWTO.sgml,v 2.10 1997/11/12 15:23:04
storm Exp $
1. Introduction
The Debian project is currently in the process of putting together the
next release of the Debian system. This version will
On Thu, 4 Dec 1997, Martin Bialasinski wrote:
Use the option satellite system.
No - DON'T. Satellite is useful if and only if all the usernames of
any account that will ever receive any mail are either mentioned in
/etc/aliases or match the usernames on your smarthost. Among other
Ya... its one of those days, and the subject pretty well sums it up.
I forced xlib6g over xlib6, so I could install the Gimp package. I later
rebooted, and now I get this everytime I do a startx..
xauth: can't load library 'libXmu.so.6'
xinit: can't load library 'libXmu.so.6'
Now, this does
On Thu, 4 Dec 1997, Paul Rightley wrote:
Will,
Thanks for the information (and commiseration). I will file a bug with the
xfree folks.
You're quite welcome. Two other notes:
it seemed to work ok with (the demo version of) Accel-X. Not free, but
an alternative. I ran their
On Thu, 4 Dec 1997, Dana Epp wrote:
Ya... its one of those days, and the subject pretty well sums it up.
I forced xlib6g over xlib6, so I could install the Gimp package. I later
rebooted, and now I get this everytime I do a startx..
Bad idea, you just hosed every libc5 program on your
My new drive came, and i'm trying to do a fresh install, as some stuff got
tossed in strange places a few months ago.
I've already found that base-files.deb won't install onto a raw file system,
so I have the .tgz untarring at the moment (gee, this maxtor is louder than i
expected). ANd the
On Thu, 4 Dec 1997, Dana Epp wrote:
xauth: can't load library 'libXmu.so.6'
xinit: can't load library 'libXmu.so.6'
Now, this does exist. Its located in /usr/X11R6/lib so I can't figure why
do an
ls -l /usr/X11R6/lib/libXmu.so.6
and make sure the symlink's not broken.
The question below and recent email about commercializing Debian inspired
me to add ammo for some, maybe information for others. If 'commercializing'
is a bad word, just view it as 'clearing up some common misconceptions
about linux, Debian specifically,' but anyway:
I think Debian should
I hope you can help me find out the origin or how we got this catch 22
phrase?
I would appreciate a respomse from you. I got to you page when I did a
search on catch 22
Thank you in advance.
Ofori Boateng
Searching for catch 22 brought you to the Debian pages because of
this
What techniques do folks use for editting web pages? I use
Netscape's Composer for editting and would like to let a couple of users
edit the files under /var/www.
I've thought about making /var/www group writeable (right now it's
only group read and executable), but I was worried that may
1 - 100 of 101 matches
Mail list logo