Promocion MKNET

MKNET ARGENTINA Internet Web Server TEL/FAX: 4644-1659 -- SU GRAN NEGOCIO VIRTUAL JUNTO A MKNET -- Comience el nuevo

Re: pon no funciona

Hola a todos/as: El Fri, Feb 18, 2000 at 10:01:41PM -0500, ADnoctum escribió: [...] aquí está el /var/log/ppp.log: [...] Feb 18 16:17:38 ozono chat[352]: send (ATF^M) -- Yo supongo que es esto. ¿De dónde diablos salió ese ^M? [...] Dónde se guarda la cadena de inizialización del módem. Por

Re: Error en Squid y otros

Luis Clausell wrote: Yep José! El Tue, 15 de Feb de 2000 a las 09:19 AM, José Illescas Pérez escribió: Tengo una máquina con Debian haciendo de Proxy con squid y ultimamente estoy obteniendo mensajes del tipo: No buffer space available También tengo Squid y nunca me ha

Re: Editar documentos postcript

Hola a todos Gracias a todos por vuestras respuestas. Me han sido de gran ayuda. Por cierto, mirando el GYVD (Gnu Yellow Vector Drawing) al que Xose Manoel Ramos hacia referencia (promete, pero está verde), he llegado a uno llamado sketch y que está incluido en potato. Hice una instalación

Por fin Windows2000

Perdonadme pero no me he podido resistir. Ya va a salir Windows 2000 según he oído esta mañana, pero no va a ser esta la versión que me lleve de nuevo a ese ambiente. La noticia es que SOLO TIENE UNOS 63000 FALLOS y además en Europa, siempre a remolque de USA, se estudia la

Imagenes de CD's

Alguien me puede indicar algun sitio en la web donde pueda coger las imagenes de potato o woody? He mirado en ftp://ceu.fi.udc.es/ pero ya no estan, y en cdimages.debian.org solo me deja crear las imagenes de slink y nunca las de woody o potato. Gracias

Re: Imagenes de CD's

On Thu, 17 Feb 2000, GNFR wrote: Alguien me puede indicar algun sitio en la web donde pueda coger las imagenes de potato o woody? He mirado en ftp://ceu.fi.udc.es/ pero ya no estan, y en En ceu.fi.udc.es estarán mañana por la tarde de nuevo las de Potato. También las puedes coger en

Sobre sendmail relay y MX

estoy tratando de configurar sendmail, el tema es que no me deja que las maquinas de mi red salgan por en smtp me dice no relay viendo documentacion adjunta lei que hay que armar un archivo llamado access.db ¿esto es correcto? con este archivo se permite el relay ¿el formato es este:? 192.168.1.0

Red Casera

Os voy a proponer un pequeño reto, ya que creo que voy a pedir bastante cosa Me estoy montando una red casera de 2 (posiblemente en un futuro no muy lejano 3) ordenadores. El mas potente va a tener (bueno, de hecho ya lo tiene) linux instalado (con un kernel 2.214) y va a actuar como

Re: Red Casera

On Thu, 17 Feb 2000, Pookie wrote: 1) Como configuro los servidores SMTP (sendmail) y POP3 (que porgrama??). Mi idea es que ademas de poder actuar como servidor propio (¿¿eso seria enviar mails con [EMAIL PROTECTED]) pueda contactar con el servidor SMTP/POP3 de mi ISP para asi enviar mails con

Re: Paquete emacs para X

On Tue, Feb 15, 2000 at 11:27:09PM +0100, David Muriel wrote: creo que lo que buscas es esto: ii emacs20 20.3-7 The GNU Emacs editor. ii emacsen-common 1.4.8 Common facilities for all emacsen. Pues efectivamente, era eso. Muchas gracias. Emacs is a religion

Re: Red Casera

El jueves 17 de febrero de 2000 a la(s) 14:54:26 +0100, Pookie contaba: 1) Como configuro los servidores SMTP (sendmail) y POP3 (que porgrama??). Para poner el sendmail vas a tener que leer mucho :^). No me suena que haya un sendmail-HOWTO. Cuando necesito ver algo, lo miro

Re: [Web Browser Svgalib]

Guenas On Wed, Feb 16, 2000 at 09:46:46AM -0500, Ugo Enrico Albarello wrote: 1. El framebuffer es para tarjetas que soporten VESA 2.0 (es aqui donde puedo estar metiendo la gamba), basicamente tarjetas de un antiguedad escasa o mediana. Si y no :o) También hay soporte para VGA-16. Pregunta:

Re: [Web Browser Svgalib]

Guenas On Wed, Feb 16, 2000 at 01:21:30PM +0100, Grzegorz Adam Hankiewicz wrote: El framebuffer es un fichero /dev/fbx que simula la memoria gráfica de la tarjeta de vídeo instalada. Esto quiere decir que leyendo y escribiendo el fichero, se modifica la pantalla. Las ventajas de abstracción son

RE: [Web Browser Svgalib]

1. El framebuffer es para tarjetas que soporten VESA 2.0 (es aqui donde puedo estar metiendo la gamba), basicamente tarjetas de un antiguedad escasa o mediana. [...] PD: DinX es un sistema de ventanas basado en el kernel que usa fb, la página es http://dinx.sourceforge.net/ Se ha hablado de

Novato: Actualizar Debian 2.1

Hola, Es la primera vez que voy a actualizar un sistema con Debian y me gustaria valerme de vuestra experiencia. Estoy usando Debian Citius 2.1 Lite, los CDs que venian con Linux Actual de Prensa Tecnica. Como no se ni siquiera si esta es una version oficial de debian no se si habra algun

Sugerencias a la traduccion de Powered by

Que tal? He echado un ojo a la votacion que hay en ORCA respecto a la traduccion de Powered by, y me ha extrañado que no se incluya la traduccion que viene en la mayor parte de los diccionarios: Impulsado por, pues incluye los dos sentidos que tiene Powered by en ingles: funcionando con y

Re: [Web Browser Svgalib]

At 03:40 PM 2000-02-17 +0100, Andres Herrera wrote: Guenas On Wed, Feb 16, 2000 at 09:46:46AM -0500, Ugo Enrico Albarello wrote: [...] Si y no :o) También hay soporte para VGA-16. Pregunta: ¿podria usar framebuffer con una VGA de las antiguas (de aquellas de 256K de memoria? Es que no tengo

RE: Sugerencias a la traduccion de Powered by

Apoyo la mocion! :)) Estoy completamente de acuerdo contigo... Pero no encuentro ninguna idea q me termine de gustar... :( Saxa -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Enviado el: jueves, 17 de febrero de 2000 17:36 Para:

Unidentified subject!

unsubscribe [EMAIL PROTECTED]

RE: [Web Browser Svgalib]

On Sat, 19 Feb 2000, ADnoctum wrote: Se ha hablado de svgalib, fb y de hasta otro del kernel(no me acuerdo ahora), pero ¿no sería más fácil implementar una API independiente de librería que permita escoger si utilizamos el fb o svgalib al momento de compilar?. De esta forma se puede utilizar

Re: [Web Browser Svgalib]

On Thu, 17 Feb 2000, Andres Herrera wrote: Seria interesante saber cuantas son esas muchas mas, y sobre todo cuales. No te doy la lista simplemente porque no sigo nunca los kernels inestables :-) Si tienes uno a mano, con hacer un enable framebuffer en el menuconfig ya deberías ver la lista. Y

OFFTOPIC: Nueva versión de Libre

Espero que os guste esta nueva versión de LIBRE: LIBRE Lleva apenas veinte horas y ya está buscando un Service Pack Porque le soltó una pantalla azul el Visual C++ Luego navegando por la red lo vio con claridad un compilador llamado GCC rezaba sin parar

Re: [Web Browser Svgalib]

On Sat, Feb 19, 2000 at 05:57:15PM -0500, ADnoctum wrote: Se ha hablado de svgalib, fb y de hasta otro del kernel(no me acuerdo ahora), pero ¿no sería más fácil implementar una API independiente de librería que permita escoger si utilizamos el fb o svgalib al momento de compilar?. De esta

rsync question

Hi, I'm in the middle of do the rsync and I found out that the symbolic link from main/binary-i386/.../.../some-file to main/binary-all/.../.../some-file were actual the two same files. They are not symlinked. Therefore, my harddrive is filled up very fast. Could someone help?

Re: which 2.2 kernel?

On Thu, 17 Feb 2000, Peter Palfrader aka Weasel wrote: palfra Debian 2.1, codename slink, used kernel 2.0.36 IIRC this may not be accurate on all versions of slink as the one that comes with the oreilley book defaults to 2.2.12(anyone know why??) nate

Re: samba 2.0.5a-1 - win2k

make sure encryption is turned on an everything. id suggest moving to samba 3.0 if you can, ive found it to be very reliable and quite compadible with win2k. you can get it from CVS. im using CVS from 1-14-2000, running with security set to SERVER and pointing it to a PDC for password auth(nt4)

SMP

Hi, I have: bdg:~# dmesg | more Linux version 2.2.13 ([EMAIL PROTECTED]) (gcc version 2.95.2 19991109 (Debian GNU/Linux)) #6 SMP Mon Feb 14 16:22:26 JAVT 2000 mapped APIC to e000 (00229000) mapped IOAPIC to d000 (0022a000) ... CPU0: Intel 486 DX/2 stepping 05 SMP motherboard not

X config for Mouse

Hi, I'd like to know what protocol should I put in the XF86Config for the Logitech wheel mouse? I tried the MouseMan protocol and the mouse cursor jump/move out of control :( TIA --- tcp

Re: SMP

you sure that MB supports dual processors? it seems as if linux doesn't say its a SMP capable MB at all. can linux run on SMP 486s ? never heard of anyone who ever ran a dual cpu 486, although ive heard of their existance.. nate On Thu, 17 Feb 2000, Oki DZ wrote: litban litban Hi, litban

Re: X config for Mouse

If it's ps/2 try either ps/2 or imps/2 Chanop Once upon a time, I heard Timothy C. Phan said Hi, I'd like to know what protocol should I put in the XF86Config for the Logitech wheel mouse? -- ,-. | Chanop

Re: firewall

On Wed, Feb 16, 2000 at 11:46:45PM +0100, [EMAIL PROTECTED] wrote: Is this to be a dial-up router? If so, I'd say to look at: http://mpsdr.unx.nu/MINI/ This thing runs off of a single 3.5 floppy - doesn't even use the hard drive. I've got it running here on a 486DX2/66 with 16 megs

Re: Boot problem

Most of the time this means that you have Lilo configured wrong. There are essentially two steps needed to get Lilo going: editing the file /etc/lilo.conf to correctly reflect your setup, and then running the /sbin/lilo command to install Lilo. If you post more information, such as... 1) the

Re: Video card recommendation?

Unfortunately there's not a video card for XF86/Linux that does both great 2D and 3D at the same time as far as I know. G400 is great for 2D but it's very CPU dependent as far as 3D is concerned. The reason why geforce cards are so slow currently in 3D in XF86 is because drivers are not ready

Re: afterstep

On Tue, Feb 15, 2000 at 07:38:31PM -0600, Gregory T. Norris wrote: Possibly a stupid question, but are you sure that you have xterm installed? If I remember correctly it used to be included in one of the main X packages (xbase?), but now has it's own package. On Tue, Feb 15, 2000 at

Re: Video card recommendation?

[EMAIL PROTECTED] wrote: If you'll just be playing 3D games go with a 3dfx card. I know visual quality sucks, but at least your games will be playable. I've found the Voodoo3 to have excellent 2D visual quality, and very good 3D visual quality. I chose it over the other options because I have

Resolved but not solved Unable to handle kernel paging request

I re-compiled the kernel and it is working... When I removed the sdram I forgot that I had added an append to lilo.conf. Would that have caused the kernel to crash so utterly and completely? Thank God for the rescue disk...

Re: Your notice in Internet.

Would this be of any help in my coding? David - Original Message - From: Zygmunt Orlowski [EMAIL PROTECTED] To: debian-user debian-user@lists.debian.org Sent: Wednesday, February 16, 2000 11:21 AM Subject: Your notice in Internet. You drive a car very often. Sometimes you

ppp_on_boot disconnects?

I've got /etc/ppp/ppp_on_boot so that my machine connects immediately on boot-up. However, the connection has been going down after a few minutes. The last few lines of ppp.log show this: Feb 16 20:41:27 roberts pppd[149]: rcvd [LCP EchoRep id=0x23 magic=0xc45a5c32] Feb 16 20:41:43 roberts

Re: Correct PAM settings for login

On Wed, 16 Feb 2000, Ben Collins wrote: But did you configure /etc/libnss-ldap.conf? Yes, I configured the host and base parameters. I didn't think I needed to configure any of the other options. If so, does an ls -l /home show the correct owners (even if they are gone from /etc/passwd)?

debconf: Dialog front end failed to initialise

Hi, sorry if I missed this thread. All packages in potato that use debconf now give me this message when I upgrade: debconf: failed to initialize Dialog frontend debconf: falling back to Text frontend furthermore they don't seem to fall back to text, they just move on. I've tried

Re: debconf: Dialog front end failed to initialise

Brendan Cully wrote: furthermore they don't seem to fall back to text, they just move on. I've tried dpkg-reconfigure debconf, with the same results, and also dpkg-reconfigure -fText debconf. The latter command just completes, without errors, but without letting me reconfigure. Any hints? If

Re: Cannot compile newest Afterstep

On Tue, Feb 15, 2000 at 07:41:36PM -0600, Gregory T. Norris wrote: AfterStep 1.8.0 compiles just fine here on potato, provided that all of the necessary x-dev packages are installed. ---end quoted text--- Yeah, I must have been missing some dev libraries. I apt-getted the png, jpeg, and xpm

Re: Video card recommendation?

On Thu, Feb 17, 2000 at 02:23:40AM +, Sean Johnson generated a stream of 1s and 0s: [EMAIL PROTECTED] wrote: If you'll just be playing 3D games go with a 3dfx card. I know visual quality sucks, but at least your games will be playable. I've found the Voodoo3 to have excellent 2D

Re: SMP

A long time ago, in a galaxy far, far way, someone said... you sure that MB supports dual processors? it seems as if linux doesn't say its a SMP capable MB at all. It's concievable that the BIOS would enable it's SMP support when the second CPU card in added. It's also possible that there was

Re: firewall

On Wed, Feb 16, 2000 at 20:40, Mike Werner wrote: On Wed, Feb 16, 2000 at 11:46:45PM +0100, [EMAIL PROTECTED] wrote: Is this to be a dial-up router? If so, I'd say to look at: http://mpsdr.unx.nu/MINI/ This thing runs off of a single 3.5 floppy - doesn't even use the hard drive.

ISO distribution

Can you please tell me is there is a distribution of Debian-Linux available for downloading? If there is can you point the way? Thanx - Michael

laptop in a bad place - won't boot

Hola~ I have a laptop that seems to be beyond help. When I try to boot it, I get: Kernel panic: No init found. Try passing init= option to kernel. What exactly does this mean? When I boot the rescue floppy, then type rescue root=/dev/hda1 I get: VFS: Mounted root (ext2 filesystem)

Re: ppp_on_boot disconnects?

On Wed, Feb 16, 2000 at 09:09:29PM -0600, Matthew W. Roberts wrote: I've got /etc/ppp/ppp_on_boot so that my machine connects immediately on boot-up. However, the connection has been going down after a few minutes. The last few lines of ppp.log show this: Feb 16 20:41:27 roberts pppd[149]:

Re: ISO distribution

check ftp.linuxberg.com /pub/ISO they got isos of most every linux distro out there corel caldera debian suse slackware stormix redhat mandrake etc. nate On Wed, 16 Feb 2000, Michael Kayne wrote: mkayne Can you please tell me is there is a distribution of Debian-Linux available mkayne for

Re: which 2.2 kernel?

On Thu, 17 Feb 2000, Micha Feigin wrote: I was wondering which is the stablest 2.2 kernel curently I am never shure if it is the even or uneven numbers ( is it 2.2.13 or 2.2.14 ?) I am using kernel 2.2.9 , is it worth the update? [EMAIL PROTECTED]:~ finger @ftp.kernel.org [zeus.kernel.org]

PCI card never can be set up

Hi all. Can anyone say how to stop the PCI D-Link 528 card taking an IRQ of 255 in this 1996 system using Phoenix BIOS 4.4? I had it go wrong on a friend's machine during installation and its driving me nuts as I have to go back today. ne.c PCI BIOS reports NE 2000 close at io0x4000 irq=255

Soundblaster AWE64

Hi! I tried to install a Soundblaster AWE64 under Debian 2.2. The Kernel 2.2.14 is compiled with the following options: * Sound card support * OSS sound modules Additional low level sound drivers --- [*] Additional low level sound drivers * AWE32 synth But the only message I

PCI BIOS problems

Hi all. Can anyone say how to stop the PCI D-Link 528 card taking an IRQ of 255 in this 1996 system using Phoenix BIOS 4.4? I had it go wrong on a friend's machine during installation and its driving me nuts as I have to go back today. ne.c PCI BIOS reports NE 2000 close at io0x4000 irq=255

Re: firewall

Sounds nice and the infos at there homepage looks good, but where to get it? Down at the bottom of the page - there's a banner labelled Download. Under that banner are two links: Download by http and Download by ftp Ok, I saw that but last night I've got the message that the address was

Re: firewall

** On Wed, Feb 16, 2000 at 04:03:50PM -0500, mountaincable.net scribbled: I've picked up an ORION 486DLC-33 w/386 BIOS that I want to set up as a firewall. Newer distr's of linux have min requirements above my system. What distr. should I use (Debian has been recommended)? Is there an

Re: ISO distribution

check ftp.linuxberg.com /pub/ISO they got isos of most every linux distro out there corel caldera debian suse slackware stormix redhat mandrake etc. Check also: http://linuxos.webprovider.com/; Uwe

Re: Debian Newbie problems.

Hi, I am surprised to note that debian distributions in cdrom donot contain netscape. Why is it that Redhat distributions contain netscape while debian cdrom doesnot? As I a newbie to Debian, could anyone please tell me the plus/minus points of debian over redhat distribution. Please consider

dosemu + netware

Hi all, I have slink + kernel 2.0.38 + dosemu 0.98.8-2 (compiled from potato sources). I want to login to netware server using dosemu. When I run 'dos' as _root_ (then 'netx' + 'login') everything works very well. But it doesn't work when I run 'dos' as a non-root user. I have messages:

Recording cd's with cdrecord or xcdroast

Does anybody here know how to copy an audio using cdrecord or xcdroast, I've checked out the manpage of cdrecord but couldn't find anything interesting and xcdroast won't allow me to select my IDE cd-rom as the audio reading device, it'll only allow me to use my SCSI burner... but that one has to

Re: PCI BIOS problems

An irq of 255 ? Can't be!! io of 0x4000 ? You are using the ne driver... that one is for ISA ne compatible network cards and should ALWAYS be used in combination with the option io=0x and optional with irq=XX I guess you should try using the ne2k-pci driver, or insert the module with

Re: Recording cd's with cdrecord or xcdroast

According to my docs here, you need to run your ide cdrom in scsi emulation mode, least that's how i had to do it. Not sure, but it worked for me. Peter Good. On Thu, 17 Feb 2000, Ron Rademaker wrote: Does anybody here know how to copy an audio using cdrecord or xcdroast, I've checked out the

OT: SCSI hostadapter SYMBIOS - Adaptec

Hi, I've got an Adaptec SCSI host adapter and tried to use it instead of my old SYMBIOS adapter, which has no bios interface onboard. After the change fdisk spit out a lot of errors, and I remembered that both adapters have different sorts of hard formats. Do anyone know of a way to go? Backing

Re: ppp_on_boot disconnects?

On Feb 16, 2000 at 10:28:11PM, John Hasler wrote: Matthew W. Roberts writes: I'm not sure what that means. It's almost like the connection is terminated after running scripts in /etc/ppp/ip-up.d . I searched Deja and the web but could not find any documentation on how this is supposed

Re: Soundblaster AWE64

On Thu, 17 Feb 2000, Michael Symalla wrote: Hi! I tried to install a Soundblaster AWE64 under Debian 2.2. The Kernel 2.2.14 is compiled with the following options: It's not the same case, but I have a SoundBlaster AWE 128 and only runs with the es1370 driver. You can try

Re: Correct PAM settings for login

Okay, I am having more problems. I decided to enable logging for slapd so I can see when connections are made, what is being searched for, and be better able to determine what is and isn't working with my setup. No luck. I can't get logging to work. I have set 'loglevel 1', 'loglevel 256', and

Re: Correct PAM settings for login

On Thu, Feb 17, 2000 at 08:19:23AM -0500, Joseph A. Martin wrote: Okay, I am having more problems. I decided to enable logging for slapd so I can see when connections are made, what is being searched for, and be better able to determine what is and isn't working with my setup. No luck. I can't

Re: Soundblaster AWE64

Hi, I think that won't solve my problem as my AWE64 is not an pci device ;-( As far as I understood the help for the es1370 driver, it is for pci soundcards. On Thu, Feb 17, 2000 at 02:04:47PM +0100, Darlock wrote: It's not the same case, but I have a SoundBlaster AWE 128 and only runs with

Re: PCI BIOS problems

Thanks for suggestion. I'm telnetting in from work so should be able to reboot as needed. Output of dmesg: ne.c:v1.10 9/23/94 Donald Becker ([EMAIL PROTECTED]) NE*000 ethercard probe at 0x2c0: 00 c0 df b1 3a 25 eth0: NE2000 found at 0x2c0, using IRQ 10. ne.c: PCI BIOS reports NE 2000 clone at

Re: Recording cd's with cdrecord or xcdroast

Quoting Ron Rademaker ([EMAIL PROTECTED]): Does anybody here know how to copy an audio using cdrecord or xcdroast, I've checked out the manpage of cdrecord but couldn't find anything interesting and xcdroast won't allow me to select my IDE cd-rom as the audio reading device, it'll only allow

Re: C++ dev environment advice

Michael I'm sorry not to be more prompt in my reply to this. Some have advised using the STL -- the Standard Template (not 'type') Library. That is sound advice. ANSI C++ Standard Document is the athority, but is expensive and hard to understand unless you are a language lawyer, let alone

Re: Recording cd's with cdrecord or xcdroast

On Thu, 17 Feb 2000 13:49:49 GMT, David Wright writes: I'm not sure reading and writing simultaneously is a good idea so it might not matter if the burner has to perform both operations (via hard disk). Well, on my 166 mhz machine it's possible to rip from hdc and burn to hdd on-the-fly, so that

How can go back to 'stable' from 'frozen'

Hi, Other than replacing my ethernet card 3com595, I don't seem to have an alternative as I have a dual Processor Pentium machine (the second processor isn't recognised by the 2.0.36 kernel) with 'frozen' loaded and can't get my compiled kernel, 2.2.14 to talk to the internet. I want to go

APT 0.5.x debian packages anywhere?

Are there any Debian packages for Alsa 0.5.x yet? I've got a SB Live and I'd like to test it with them, so if there's a developer with a staging area, please come forward... -- V.K. [EMAIL PROTECTED]

make dep failed as did make menuconfig

Any suggestions on what to install? Still desperately trying to get a PCI card to work. flash:/usr/src/linux# make dep gcc -I/usr/src/linux/include -O2 -fomit-frame-pointer -o scripts/mkdep scripts/m kdep.c make: gcc: Command not found make: *** [scripts/mkdep] Error 127 flash:/usr/src/linux#

Re: PCI BIOS problems

Well dmesg says it all Try not inserting the module at boot time for a change but insert it from the commandline. First remove all ne modules (if any are loaded), next try: modprobe ne io=0x2c0 irq=10 if that doesn't work try: insmod ne io=0x2c0 irq=10 (The first should work) Then do:

Re: make dep failed as did make menuconfig

On Thu, Feb 17, 2000 at 02:25:08PM -, Patrick Kirk wrote: Any suggestions on what to install? Still desperately trying to get a PCI card to work. flash:/usr/src/linux# make dep gcc -I/usr/src/linux/include -O2 -fomit-frame-pointer -o scripts/mkdep scripts/m kdep.c make: gcc: Command

Re: Debian Newbie problems.

[EMAIL PROTECTED] wrote: I am surprised to note that debian distributions in cdrom donot contain netscape. Why is it that Redhat distributions contain netscape while debian cdrom doesnot? Netscape is non-free. In this context, that means that it doesn't fit the DFSG (Debian Free Software

Re: PCI BIOS problems

If I take out the PCI card and put in a second NE2000 with jumpers set to io=0x300 and irq=11, is there any reason why that would fail? Getting desperate here. Patrick

Re: Soundblaster AWE64

On N¨m, 17 Hai 2000, Michael Symalla wrote: I tried to install a Soundblaster AWE64 under Debian 2.2. The Kernel 2.2.14 is compiled with the following options: * Sound card support * OSS sound modules Additional low level sound drivers --- [*] Additional low level sound drivers

Re: PCI BIOS problems

Hi Ron, The ne.o module loads cleanly. Its the false reading on ne2k-pci that kills me. I have to leave ne.o installed as its the card I've telnetted in from at work. Patrick

Re: Recording cd's with cdrecord or xcdroast

I have a Athlon 500 so I guess it should also be able to rip and burn on-the-fly, please let me know how you did this... Ron On Thu, 17 Feb 2000, Robert Waldner wrote: On Thu, 17 Feb 2000 13:49:49 GMT, David Wright writes: I'm not sure reading and writing simultaneously is a good idea so it

Re: PCI BIOS problems

There is a reason why that could fail: irq 11 or io 0x300 could be taken already, you can check that by: cat /proc/interrupts and cat /proc/ioports There you see what interrupts and io adresses are taken by your devices, if irq 11 and io 0x300 are not taken... there would be no reason that that

Re: PCI BIOS problems

So you have 2 ne compatible cards in that computer? Have you tried loading in ne2k-pci with irq=XX io=0xXXX arguments that make sense? (irq=255 is something I think is IMPOSSIBLE because as far as I know irq go between 0 and 16 (16 not included), in other words 4 bit not 8). Ron On Thu, 17 Feb

Re: PCI BIOS problems

Would modprobe ne2k-pci io=0x300 irq=11 work when: cat /proc/io... -001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : npu 0170-0177 : ide1 01f0-01f7 : ide0 02c0-02df : NE2000 02f8-02ff :

Re: mandb, man, manpath question

On Thu, 17 Feb 2000, Johann Spies wrote: On Wed, Feb 16, 2000 at 04:31:53PM -0700, Rick Macdonald wrote: On Tue, 15 Feb 2000, Johann Spies wrote: After installing a few potato packages the manpages of some of them are not available although they are there. I hope that you didn't

Re: PCI card never can be set up

try 1) getting the latest drivers from NASA (go to yahoo.aphroland.org search for nasa if you dont have the url i dont have it handy) 2) changing PCI slots nate On Thu, 17 Feb 2000, Patrick Kirk wrote: patric Hi all. patric patric Can anyone say how to stop the PCI D-Link 528 card taking an

Re: Soundblaster AWE64

On Thu, 17 Feb 2000, Michael Symalla wrote: msymal Sound initialization started msymal AWE32: not detected msymal Sound initialization complete on SBAWE32 you need to use isapnp to init the wavetable portion of the card, it is probably the same on awe64. see man isapnp for more info nate

Re: PCI BIOS problems

If the card can work on irq 11 and io 0x300 it should work because both the irq as the io adress aren't taken. You should try it... Ron On Thu, 17 Feb 2000, Patrick Kirk wrote: Would modprobe ne2k-pci io=0x300 irq=11 work when: cat /proc/io... -001f : dma1 0020-003f : pic1 0040-005f

Re: Debian Newbie problems.

On Thu, 17 Feb 2000, Suresh Kumar.R wrote: cetvm Why is it that Redhat distributions contain netscape while debian cdrom cetvm doesnot? it does not comply with the free software defenition(sp) let alone an open source one, debian is much more strict as to what they include. for some it can be

Re: Recording cd's with cdrecord or xcdroast

On Thu, 17 Feb 2000, Ron Rademaker wrote: ron Does anybody here know how to copy an audio using cdrecord or xcdroast, ron I've checked out the manpage of cdrecord but couldn't find anything ron interesting and xcdroast won't allow me to select my IDE cd-rom as the ron audio reading device, it'll

Re: Recording cd's with cdrecord or xcdroast

Well, I tried with the cpu being on its default 133 mhz, but did it only occasionally without buffer underruns, now I've overclocked to 166 mhz and that works just fine (of course I made sure that not any single unnecessary process is running while burning, no cron, no at, no anything). I'm

Re: PCI BIOS problems

So to make it work - please point out any obvious things I may have forgotten assuming I get the jumper settings right. /etc/conf.modules alias eth0 ne alias eth1 ne options ne io=0x2c0,0x300 irq=10,11 /etc/modules #auto ne #ne2k-pci ip_alias ip_masq_quake ip_masq_raudio rarp - Original

Re: How can go back to 'stable' from 'frozen'

On Thu, 17 Feb 2000, Rajesh Radhakrishnan wrote: Hi, Other than replacing my ethernet card 3com595, I don't seem to have an alternative as I have a dual Processor Pentium machine (the second processor isn't recognised by the 2.0.36 kernel) with 'frozen' loaded and can't get my compiled

Re: PCI BIOS problems

Are you planning to reboot to make this work??? You can test anything using modprobe and/or insmod... But the config files look good, so it should work (assuming you got the jumpers right). Ron On Thu, 17 Feb 2000, Patrick Kirk wrote: So to make it work - please point out any obvious things I

Re: PCI BIOS problems

The problem is the hardware. The PCI bios cannot assign a free interrupt to the card in the PCI slot. Therefore it assigned a value of 255 to it. Try to assign a interrupt to the pci device by changing the bios settings. Frank Dost

default bpp for x

Hi, Is there anyway to configure X to come up at a certain bpp. It always default to 8. I'd like it to have 24 bpp. I currently have to bring x up by xinit -- -bpp 24. TIA. --- tcp

Re: which 2.2 kernel?

Hi there, Even second digit(s) kernels are stable, odd second digit(s) kernels are unstable or development kernels, use at your own risk. I've found no problems with 2.2.13, others may know different. Don't use 2.3.x unless you want bleeding edge and are prepared to suffer the

Re: PCI BIOS problems

A long time ago, in a galaxy far, far way, someone said... Would modprobe ne2k-pci io=0x300 irq=11 work when: For PCI cards (indicated by the fact that you're using the driver ne2k=pci) you don't need to bother with io= and irq= statements on the command line. All that information is read from

strange mke2fs problem - SOLVED

Hi, All thanks for all the advices indeed, it was sparse superblock feature which prevents partition mounting with slink rescue. thank you OK

  1   2   >