Se ve que el uso del Mutt aumenta ;)
Tengo el problema de que quiero bajarme el correo desde el trabajo, con
fetchmail en modo daemon, y mantenerlo ahí para bajarmelo todo junto desde
casa para guardarlo. Mi problema surge porque el sistema va sin problemas
con el servidor de wanadoo, pero el de
Buenas.
Tengo una máquina que quiero que tenga los mismos paquetes instalados que
otra. Me imagino que debe haber un ficherito por ahí que, copiándolo de uno
al otro, permitirá al otro tener los mismos paquetes instalados que el
primero. ¿Podría alguien ayudarme en ello, por favor?
Gracias por
Ok. Haré las pruebas. Gracias ...
--- [EMAIL PROTECTED] escribió:
On Wed, 6 Sep 2000, Carlos López wrote:
Aguien conoce algún soft de gestor de correo via
interface web con soporte de múltiples dominios y
cargas altas.
Puede que la convinacion de qmail con vpopmail
qmailadmin
el archivo es /var/dpkg/dpkg.list (o /var/cache/dpkg/dpkg.list) o algo asi
(no me acuerdo muy bien, pero esta por ahi ;))
Supongo que si lo copias haciendo un APT deberia coger los paquetes e
instalarlos lo malo es que no fuera que le diera por decirte eso de latest
version is installed ;)
De
Hola:
Hace poco en respuesta a una pregunta mía alguien me respondió que
si tenía asignada la variable de entorno http_proxy.
Y mi pregunta es la siguiente:
¿ Existe en algún sitio un listado de las variables de entorno
digamos, estándar ?
(Si no existe, podríamos crearlo indicando variable
Hola,
Mírate dpkg --get-selections y dpkg --set-selections
Javi
-Mensaje original-
De: TooMany [mailto:[EMAIL PROTECTED]
Enviado el: jueves 7 de septiembre de 2000 9:22
Para: Lista Debian
Asunto: lista paquetes
Buenas.
Tengo una máquina que quiero que tenga los mismos
Hola.
Estoy usando 'Woody' y después de actualizar los paquetes con apt hace
dos días, no consigo rearrancar la máquina. Bueno, me ha pasado en dos
máquinas. El kernel parece arrancar bien. Llega a INIT. En una máquina
he puesto el kernel 2.4.0-pre6 y en otra el 2.2.17
La única manera en que
On Thu, 31 Aug 2000, you wrote:
Tengo unas dudas:
- Como se utiliza un compilador cruzado.
Esencialmente, haces CC=compilador-cruzado y ejecutas make :-)
Se supone que el compilador cruzado debe saber ya dónde están los
ficheros de cabecera y las bibliotecas del sistema para el que quieres
Hola:
Acabo de actualizarme a potato, y tengo un problema con el latex:
Durante la instalación, la configuración de latex falló (no se porque),
así que tuve que correrla manualmente. Ahora cuando trato de compilar
cualquier
documento, me genera el siguiente error:
!undefined control sequence
On Thu, 7 Sep 2000, Fernando wrote:
¿ Existe en algún sitio un listado de las variables de entorno
digamos, estándar ?
(Si no existe, podríamos crearlo indicando variable y programas que
la usan)
el comando env pasado sin argumentos o export te devuelven una lista de
las variables de
Hola
Hace un tiempo estoy intentando hacer que en mi equipo funcionen las X
como es debido, pero no consigo más que ver las cosas grandotas. La conjunción
de hard es la que os pongo en el título. Creo recordar que alguien tenía algo
parecido y le iba bien. Por favor que esa
Hola,
Me ha parecido curioso que en ninguna de las potato a las que tengo
acceso el root tenga en su directorio un .bash_logout como el resto de
usuarios, ¿ Se me escapa alguna razón para que pueda ser así?
Lo de curioso lo digo porque sorprende un poco que el sistema limpie la
terminal al hacer
[EMAIL PROTECTED] wrote:
On Thu, 7 Sep 2000, Fernando wrote:
¿ Existe en algún sitio un listado de las variables de entorno
digamos, estándar ?
(Si no existe, podríamos crearlo indicando variable y programas que
la usan)
el comando env pasado sin argumentos o export te devuelven
On Thu, 7 Sep 2000, you wrote:
Me ha parecido curioso que en ninguna de las potato a las que tengo
acceso el root tenga en su directorio un .bash_logout como el resto de
usuarios, ¿ Se me escapa alguna razón para que pueda ser así?
Lo de curioso lo digo porque sorprende un poco que el sistema
El mié, sep 06, 2000 at 04:12:57 +0200 TooMany ha dit:
Buenas.
¿Existe algún paquete que trabaje en conjunción con el adduser, y que
genere automáticamente una password para el usuario que se cree?
Lógicamente, al crearla deberá mostrarla (un poco estúpido el comentario,
pero por si las
El mié, sep 06, 2000 at 07:28:24 -0500 Carlos López ha dit:
Aguien conoce algún soft de gestor de correo via
interface web con soporte de múltiples dominios y
cargas altas ??
TWIG: es libre, muy potente, basado en php y SQL. Pronto en paquete
debian, no jordi? ;-) También tienes Webmail (es
Necesito poner un servidor de correos pero no se si poner sendmail o exim
cual me recomiendan y porque?
De Gracias
--
INTRUDER A3
C Corp
-
Por lo que yo sé de LaTeX, la cosa es:
\begin{abstract}
Lo que sea
\end{abstract}
Y no
\abstract Lo que sea
¿Cómo lo tienes tú?
Saludos,
Jesus.
Camilo Alejandro Arboleda writes:
Hola:
Acabo de actualizarme a potato, y tengo un problema con
Quien:TooMany
Cuando: jueves, 07 de septiembre del 2000, a las 09:21,
Qué: lista paquetes
Buenas.
Tengo una máquina que quiero que tenga los mismos paquetes instalados que
otra. Me imagino que debe haber un ficherito por ahí que, copiándolo de uno
al otro,
Quien:[EMAIL PROTECTED]
Cuando: jueves, 07 de septiembre del 2000, a las 02:05,
Qué: S3 trio 3D/2X y monitor 15'
Hola
Hace un tiempo estoy intentando hacer que en mi equipo funcionen las X
como es debido, pero no consigo más que ver las cosas
Hola:
No se lo que he echo. Pero cuando intento hacer login y passw para acceder
al sistema como usuario, me sale el mensaje de: unable cd to usuario.
Propietario y grupo califa11 y los permisos para el dueño xxx y para los
demas nada.
Tambien he probado pocer xxx xxx xxx y tampoco no puedo
Hace poco que he instalado exim para probar, y el caso es que usa unos logs
aparte, es decir pone sus logs en el directorio /var/log/exim/ y no genera en
el syslog los mensajes del tipo mail.*, por lo que yo tenia configurado antes
en mi syslog ya no me funciona:
mail.* |/dev/tty10
Que mensajes
Hola lista, estaba intentado montar un recurso compartido con NFS en un
servidor desde mi maquina pero cuando intento hacerlo recibo el
siguiente error:
mount: RPC: Program not registered
El servicio del NFS esta levantado porque desde el servidor si puedo
montar recursos compartidos en mi
El caso es que estoy usando fetchmail+exim+procmail y tengo algunos
problemillas.
1.- Como le digo a exim que reescriba el From de todos los mensajes que salgan
por SMTP?
2.- Al ejecutar fetchmail pop.servidor.com -vvv funciona, pero si hago fetchmail
-vvv, con su .fetchmailrc correspondiente me
¿como si linux está usando la transferencia de 66m/s de mi disco duro?
¿que programa o como se puede hacer para que use esa transferencia?
tengo el kernel 2.4.0-test7 ¿que opciones le pongo? ¿necesito algun soft
adicional?
--
Saludos borxa ;)
On Thu, Sep 07, 2000 at 10:11:31AM +0200, Fernando wrote:
Hace poco en respuesta a una pregunta mía alguien me respondió que
si tenía asignada la variable de entorno http_proxy.
No guardo ese mensaje :|
¿ Existe en algún sitio un listado de las variables de entorno
digamos, estándar ?
man
On Thu, Sep 07, 2000 at 04:23:00PM +0200, Miquel wrote:
TWIG: es libre, muy potente, basado en php y SQL. Pronto en paquete
debian, no jordi? ;-)
El script de postinst está saliendo más largo de lo esperado. Toca
reescribir a mano todos los archivos de configuración para no violar la
policy :)
On Thu, Sep 07, 2000 at 11:46:34AM -0500, Lemus Moreno Jose A wrote:
Necesito poner un servidor de correos pero no se si poner sendmail o exim
cual me recomiendan y porque?
Postfix, porque es más seguro, eficiente, y fácil de administrar.
--
Jordi Mallach Pérez || [EMAIL PROTECTED] ||
Alguien lo compilo para Slink?
Jordi Mallach [EMAIL PROTECTED] con fecha 07/09/2000 16:55:05
Destinatarios: Lista de Debian debian-user-spanish@lists.debian.org
CC:(cci: JUAN VICENTE/BANELCO/AR)
Asunto: Re: QUE CONVIENE
On Thu, Sep 07, 2000 at 11:46:34AM -0500, Lemus Moreno
Hola
El 07 Sep 2000 a las 09:49PM +0200, Lluís Vilanova escribio:
El caso es que estoy usando fetchmail+exim+procmail y tengo algunos
problemillas.
1.- Como le digo a exim que reescriba el From de todos los mensajes que salgan
por SMTP?
Mira al final del /etc/exim.conf, yo tengo puesto:
Lluís Vilanova dijo:
1.- Como le digo a exim que reescriba el From de todos los mensajes que salgan
por SMTP?
No hace mucho (finales de Julio o primeros de Agosto) se publicó por esta
lista un mini-como al respecto.
Puedes encontrar dicho correo en la página de debian (www.debian.org/search)
Holas, acabo de darme cuenta de que cuando pongo a repoducir un mp3 con xmms
o un ram con realplayer el gestor de ventanas se queda frito, al Navigator
le desaparece la barra de título del gestor de ventanas y no responde al
click del ratón.
Tengo puesto Helixcode (actualizado ayer) sobre Potato
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
TooMany [EMAIL PROTECTED] writes:
Buenas.
Tengo una máquina que quiero que tenga los mismos paquetes instalados que
otra. Me imagino que debe haber un ficherito por ahí que, copiándolo de uno
al otro, permitirá al otro tener los mismos paquetes
Jesus M. Gonzalez-Barahona wrote:
Por lo que yo sé de LaTeX, la cosa es:
\begin{abstract}
Lo que sea
\end{abstract}
Y no
\abstract Lo que sea
¿Cómo lo tienes tú?
De la primera forma (los podía compliar en slink).
No se si alguien mas haya tenido el
Para quem tiver interessem em aprender o GnuPGP, tem um documento muito
bom
em http://www.cipsga.org.br que ensina muito a entender e operar o
gnupg.
Recomendo mesmo! Pois além de ser útil é necessário para quem deseja se
tornar um Debian Developer ;-)
Abraços
Gustavo Noronha Silva wrote:
Olá pessoal,
Eu normalmente acabo não postando muito aqui, mas vocês podem me encontrar
na -devel facilmente :-) Se quiserem, estejam a vontade pra me por na lista
dos debianzeiros.br. Só não me tornei maintainer ainda por falta de
tempo...
(Por sinal, seria possível marcar uma keysigning party
Mario Olimpio de Menezes wrote:
Pelo que pude constatar ligando para o suporte da telefônica,
eu não preciso de um modem ISDN.
Alguem por aqui ja esta utilizando ISDN da Telefonica
(SP-capital) sem modem ISDN (ou seja, apenas o seu modem normal)?
Impossível. RDSI é
On Mon, 04 Sep 2000, Leandro Guimarães Faria Corcete Dutra wrote:
Mas já que você tocou nesse assunto, estou balançando entre o RDSI e o
DSL. No site da Telefônica não constam informações suficientes para uma
boa comparação de preço e conveniência. Com base em que você decidiu
pelo
On Mon, 4 Sep 2000, Leandro Guimarães Faria Corcete Dutra wrote:
Mario Olimpio de Menezes wrote:
Pelo que pude constatar ligando para o suporte da telefônica,
eu não preciso de um modem ISDN.
Alguem por aqui ja esta utilizando ISDN da Telefonica
(SP-capital) sem modem
Mario Olimpio de Menezes wrote:
Pelo que pude constatar ligando para o suporte da telefônica,
eu não preciso de um modem ISDN.
Alguem por aqui ja esta utilizando ISDN da Telefonica
(SP-capital) sem modem ISDN (ou seja, apenas o seu modem normal)?
Impossível.
1. Impossível utilizar o RDSI sem um modem digital
2. Impossível alcançar a velocidade prometida com um modem normal.
Vamos deixar bem claro: 128Kbps somente com modem RDSI. O resto e'
conversa fiada da companhia telefonica.
- Cesar
On Wed, Sep 06, 2000 at 10:56:13PM -0500, Jianbo Zhang wrote:
Dear group:
I just installed Debian 2.2 and Helix gnome. I works great except the
defaultcolordepth is 8. How can I set it to 32? Please help me.
I use gdm to start X. Can I go back to startx to start X easily? I know how to
On Thu, Sep 07, 2000 at 12:13:24AM -0400, [EMAIL PROTECTED] wrote:
Hey, I had the same question... I'm aware of that command (startx -- -bpp
32), but I was wondering if there's any file I can edit to automatically
start up in 32. Thanks in advance, bye!
Sorry, I didn't read what you were
Omitting the question of whether JavaScript is broken to begin with,
it looks like *nix versions of Netscape don't support JavaScript in
the same way that Windows versions do. In my case this means, some of
my web banking services work under Windows, but give JavaScript errors
under linux
On Mon, 13 Oct 2036, Jianbo Zhang wrote:
Dear group:
I just installed Debian 2.2 and Helix gnome. I works great except the
defaultcolordepth is 8. How can I set it to 32? Please help me.
I use gdm to start X. Can I go back to startx to start X easily? I know how to
get 32 bpp with startx.
Edit your XF86Config file. Set your DefaultColorDepth to 32. In
the section for the driver your using. Restart X.
hth,
kent
snip
Which, if you don't know, is located in /etc/X11/
Bill
Hi everyone,
I tried to re-compile the kernel (to include
generic SCSI support for my scanner) and ran into problems. Here's what I
did - as far as I can remember (following the instructions in the README file
found in the kernel source directory):
1) logged in as root
1) ran the xconfig
A long time ago, in a galaxy far, far way, someone said...
So, does this mean that if I try and install potato on my home system
using the boot floppies (to avoid having to burn 1 or more CDs) and I
select the DHCP net configuration option for doing a network/internet
install that the
i am naively using gdm. where do i go to edit the color depth setting.
On Wed, Sep 06, 2000 at 11:42:42PM -0500, William Jensen wrote:
Edit your XF86Config file. Set your DefaultColorDepth to 32. In
the section for the driver your using. Restart X.
hth,
kent
snip
Which, if you
Legend QDI Advance 5/133E AGP Pentium III motherboard
(VIA Apollo Pro 133 chipset)
Intel Pentium III/500 cpu
128MB 133mhz ram
hard drive: WDC WD102BA, 9779MB w/2048kB Cache
ATI Xpert 98 AGP video card, 8MB
3Com 3c905b NIC
SoundBlaster AWE64 isapnp sound card
Creative Labs ATAPI 52X cdrom
USR 33.6
apt-get install bin86 kernel-package
# cd kernel source dir
# make [config | menuconfig | xconfig]
# make-kpkg clean
# make-kpkg --revision=[epoch:]version kernel_image
# dpkg -i ../kernel-image*.deb
See man make-kpkg (really is easier, and dpkg will know about your
kernel).
On Wed, Sep 06,
I have seen such error messages below before too.it was when I decided
to enable dma support for the hd via hdparmcheck to see whether that
that has been enabled (hdparm /dev/hda). Anyway, after that incident, my
hardisk had bad cluster/sectors!
Patrick Cheong
Information Systems
On Wed, 06 Sep 2000, Eric G . Miller wrote:
apt-get install bin86 kernel-package
# cd kernel source dir
# make [config | menuconfig | xconfig]
# make-kpkg clean
# make-kpkg --revision=[epoch:]version kernel_image
# dpkg -i ../kernel-image*.deb
See man make-kpkg (really is easier, and
Hi Gutierrez Family...(and List),
Hey...I got the same error messsage too while attempting to compile the
patched 2.2.17 kernelI downloaded the patches for 2.2.16 and 2.2.17
and applied those to my 2.2.15 source tree in /usr/src/linux (-
/usr/src/2.2.15). I did get some error message while
Brian Schramm writes:
OK. I asked for help once before on this. I now need this fixed so I am
back to it.
I have Debian potato running at this time. I did use Debian slink working
fine. I saved the etc and other configuration data off the old slink
system on CD so I could use it
I am replying to the list...having read ktb [EMAIL PROTECTED] 's postjust
a question...is the as86 file located in the /, /bin, /sbin , /lib
directories..if so then it explains a possible / corruption before I
attempted to compile the 2.2.17 kernel
Patrick Cheong
Information Systems
On Wed, Sep 06, 2000 at 11:51:01AM -0400 or thereabouts, [EMAIL PROTECTED]
wrote:
It sounds like you're not actually running at 32 bpp. If I remember correctly,
there is a file in /proc that lists the X-server specs. It should have the bpp
you're actually running (assuming X is running
On Wed, Sep 06, 2000 at 09:46:06PM -0700, thus spake Gutierrez Family:
Hi everyone,
I tried to re-compile the kernel (to include generic SCSI support for my
scanner) and ran into problems. Here's what I did - as far as I can remember
(following the instructions in the README file found in
Dear .deb,
I've installed potato, but I can't seem to find the right driver for a
SMC9332/9334 EtherPower 10/100 card. Any idea?
I've tried epic100 and the smc* drivers without parameters but all I
get is a device or resource is busy ... :-(
TIA,
--
Olaf Meeuwissen Epson Kowa
Hello!
I try to add users to groups with adduser, and
usermod complains about max number of groups, which is 32,
so I can't add a user to more than 32 groups.
Is there a limitation to 32 of maximum number of groups
that a user can be a member?
If it is, can be changed to 64?
By,
Karesz.
On Thu, Sep 07, 2000 at 01:28:15PM +1100, loki wrote:
I thought Solaris used binary databases for speed, with a text one
as backup and for readability. What if we had both a text and
binary database, and added the following options to dpkg:
[snip]
no need install dlocate:
$ time dlocate -s
On Thu, Sep 07, 2000 at 10:31:38AM +1000, [EMAIL PROTECTED] wrote:
[snip]
Still you have to admit if there was an inteligent way of moving from text
to binary format (like cron??) it would keep two camps happy for a while...
[EMAIL PROTECTED] eb]$ time dlocate -s dlocate
Package: dlocate
Mark Simos wrote:
I did the floppies thing, and switching out floppies, even vmware point
and click floppy change, sucks.
now my install disk is hosed (didn't shutdown often enough) and I am
more interested in the learning experience of installing debian in a
different way than to save
David wrote:
Does anyone know if the kernel on potato has been patched to support
reiserfs? but the real question is how do I make my own bootable debian
installs if they don't, and/or I have a new kernel driver I want to be
able to install?
The default kernels (and also those on potato
make[1]: Entering directory =
`/usr/src/kernel-source-2.2.17/arch/i386/boot'
as86 -0 -a -o bootsect.o bootsect.s
make[1]: as86: Command not found
make[1]: *** [bootsect.o] Error 127
make[1]: Leaving directory =
`/usr/src/kernel-source-2.2.17/arch/i386/boot'
make: ***
On Thu, Sep 07, 2000 at 03:27:03PM +0900, Olaf Meeuwissen wrote:
Dear .deb,
I've installed potato, but I can't seem to find the right driver for a
SMC9332/9334 EtherPower 10/100 card. Any idea?
I've tried epic100 and the smc* drivers without parameters but all I
get is a device or
I want install Debian on Dell PowerEdge 2450 with DELL PERC
3/Si - RAID controller. This controller is based on Adaptec
technology but I dont know wich. Does exists Debian driver for this
controller? Is this contoller in Debian HCL :-)?
Kamil Sotak
MORAVIAPRESS, a.s.
U pony 3061
690 02 Breclav
Greetings! I'm running Debian 2.2, kernel 2.2.17. And I can't
start Gnome! I'm starting X from the command line (startx) and
have tried
exec gnome-session
in my .xinitrc and even in an .Xsession file, but all I get in
reposne is an X stuck at the corss-hatched screen and when I
Couldn't agree more!
--On Wednesday, September 6, 2000 19:31 -0500 John Hasler [EMAIL PROTECTED]
wrote:
David.Middleton writes:
...horse [EMAIL PROTECTED] ...crap...
plonk
test for mailserver failure
ok -it works
Me too. My mail doesn't seem to be getting through.
Hi everyone,
The kde.tdyc.com Woody tree for kde2 has been emptied, I'm sure of it because I
used to apt kde2 from there. I happened to have been reinstalling my Woody box
from scratch yesterday (the 6th), starting from a couple of potato disks. All
went well, but when it came to installing kde2
On Wed, Sep 06, 2000 at 11:17:40PM +0200, Philipp Schulte wrote:
On Wed, Sep 06, 2000 at 10:22:44PM +0200, Wouter Hanegraaff wrote:
Hi,
I have some files that I would like to store encrypted. Of course I can
just type them in, encrypt them using gpg and delete the original, but
that
Hi
I'm forwarding this message again because it didn't seem to get to the
list; I will add a couple of questions.
I recently installed Potato and now would like to set up sound.
I have already read on the mailing list some stuff about installing
sound support but would like to check a few
Hello list,
I'm not able to mount /cdrom any more. I get the error Too many levels
of symbolic links. This is my entry on fstab for the cdrom /dev/scd0
/cdrom iso9660 defaults,ro,user,noauto.
Does someone know where the problem could be?
I've used XF86Config to configure X but despite that from the XF86COnfig
point of view everything is fine and it made an X server runninig, I have no
mouse working (not even in XF86Setup interface) and X freeze after showing
me white and black dots and a black X (wich is not moving no matter how
Hi,
You need to install binutils, as you are missing the as86 assembler.
Also, i would run make bzImage, instead of make zImage, compression on the
kernel will be better.
Jason
-Original Message-
From: Gutierrez Family [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 06, 2000 11:46
On Thu, Sep 07, 2000 at 10:58:38AM +, Vicente Ferrando Berenguer wrote:
Hello list,
I'm not able to mount /cdrom any more. I get the error Too many levels
of symbolic links. This is my entry on fstab for the cdrom /dev/scd0
/cdrom iso9660
oops, my bad. you need the bin86 package. sorry about that.
jason
-Original Message-
From: Jason Holland [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 07, 2000 6:18 AM
To: Gutierrez Family; debian-user@lists.debian.org
Subject: RE: Error compiling kernel
Hi,
You need
A calendar.hindu file is needed for 2000/2001 and the yearly
calendar.christian needs to be updated to the new syntax.
Duplicated events needs to be removed from the yearly calendar.judaic
files.
I'll also be happy to add the events of your religion of choice.
--
ciao,
Marco
Debian Ghost [EMAIL PROTECTED] writes:
D ghost here. Just wanted to ask if anyone had had any success with
Staroffice. I was not sure what to do with the 97 meg *.bin file that I
d/l from Sun site. I have nothing to README :)
Are you pretty sure? Have a look at www.sun.com's download page,
On Thu, Sep 07, 2000 at 11:53:44AM +, Vicente Ferrando Berenguer wrote:
Hi Ethan,
Thanks for your help. The problem is that /dev/scd0 is a link to
/dev/sr0 and /dev/sr0 is a link to /dev/scd0. Do you know what the cause
could be?
rm /dev/scd0
mknod -m 660 /dev/scd0 b 11 0
On Thu, 7 Sep 2000, Jonathan Wheelhouse wrote:
Some people say to install from unstable the debs for ALSA and then
run alsaconf. A couple of questions - I could change my sources to
point at unstable but I don't want to upgrade to woody so how do I get
just the debs for ALSA without
Jonathan Markevich wrote:
On Tue, Sep 05, 2000 at 05:05:48PM -0400, Richard Black wrote:
I have just upgrade to wine (my first upgrade of wine for some time).
I've run into a couple of problems. The first one was:
shared libraries: libwine_unicode.so: cannot open shared object file: No
On Wed, Sep 06, 2000 at 10:06:58PM -0400, Michael Soulier wrote:
On Wed, 6 Sep 2000, Nathan E Norman wrote:
You only need a shell to edit a text file. You also only need to read
and understand pseudo-english.
Not to mention the fact that text editors are a tad more common
and
Try getting the slackware or mandrake installation kernel and use it
to boot the installation. Maybe it could be better to use loadlin here
to boot the setup process.
Bye.
On Wed, Sep 06, 2000 at 03:53:32PM -0400, brandont wrote:
i have quite a predicament in installing linux flavor debian
On Wed, Sep 06, 2000 at 04:29:17PM -0700, Jeff Partin wrote:
This is what I need to do..
With a cron script once every 15min dialup
and connect.. Then send a command that starts
a download and sends it to my home dir. or ftps it
to a location on another server.
Anyone ever set something up
On Wed, Sep 06, 2000 at 07:57:21PM -0400, Daniel Barclay wrote:
From: Juli-Manel Merino Vidal [EMAIL PROTECTED]
On Tue, Sep 05, 2000 at 11:42:51PM -0400, Daniel Barclay wrote:
Simply because the -l option links static libraries, those which end
in .a and not dynamic ones (.so).
On Thu, Sep 07, 2000 at 12:21:35PM +1100, Shao Zhang wrote:
Hi,
I am getting some harddisk errors on one of our production
servers. We also have the same hardware for two other
servers(web/proxy) running 2.0.36/hamm with no problems.
Hardware:
4 x 9GB Fujisu
Hello,
is there any way to install on a Debian system the same packages
that are found on another Debian system? The machines are not strictly
equal.
Tia,
Etienne
Hi,
I've installed kde2 packages for potato (before Qt went
GPL). Almost everything is working fine, except I'm not being able to
start kwm either from kdm or from console (using startkde).
Also, looking at /etc/X11 I found I don't have a window-manager
file anymore (just a
hey list
I'd love to identify some mystery files in my home
directory. there are 14 of them. they are big, and
apparently binary. they are: xaa thru xam, and the last
one is xxml.el. Just noticed them yesterday.
I have been updating and installing new stuff (including an
emacs package). I
Quoting Juli-Manel Merino Vidal [EMAIL PROTECTED]:
On Thu, Sep 07, 2000 at 12:21:35PM +1100, Shao Zhang wrote:
Hi,
I am getting some harddisk errors on one of our production
servers. We also have the same hardware for two other
servers(web/proxy) running 2.0.36/hamm with no
hey list
I'd love to identify some mystery files in my home
directory. there are 14 of them. they are big, and
apparently binary. they are: xaa thru xam, and the last
one is xxml.el. Just noticed them yesterday.
I have been updating and installing new stuff (including an
emacs package). I
Does anyone know of a website where I could enter a motherboard serial
number and find out who made the motherboard.. I used to have an URL, but
I lost it.. thanks!!
=
Shel
[EMAIL PROTECTED]
ICQ- 23454126
AIM- CacheMonet
Trying to master Storm Linux 2000 http://www.stormix.com/
On Thu, Sep 07, 2000 at 08:12:59AM +0100, [EMAIL PROTECTED] wrote:
hey list
I'd love to identify some mystery files in my home
directory. there are 14 of them. they are big, and
apparently binary. they are: xaa thru xam, and the last
one is xxml.el. Just noticed them yesterday.
The x??
Wouter Hanegraaff wrote:
Hi,
I have some files that I would like to store encrypted. Of course I can
just type them in, encrypt them using gpg and delete the original, but
that seems to be a bit of a kludge. It would mean the file is at some
time readable unencrypted (after saving in the
On Thu, Sep 07, 2000 at 10:25:00AM +0400, Rino Mardo wrote:
yes i'm running at 32 bpp. to double check i stopped gdm and did a startx --
-bpp 32 from console and i still get the grainy res. the defaulcolordepth
i'm
not sure but i'll check later.
But maybe you don't have you graphics card
On Thu, Sep 07, 2000 at 12:48:10AM -0400, Patrick Dahiroc wrote:
i am naively using gdm. where do i go to edit the color depth setting.
/etc/X11/gdm/gdm.conf
look at the end of the file; there is a line like this:
0=/usr/bin/X11/X vt7
replace with:
0=/usr/bin/X11/X vt7 -bpp 32
And should
1 - 100 of 228 matches
Mail list logo
