Bonjour,
J'ai voulu essayer d'utiliser kino sous lenny. Mais j'ai lu que dans
les noyaux récents la pile firewire était réorganisée. Plus de raw1394
donc. Quand je branche ma caméra j'ai un /dev/fw1 qui se crée. Mais
bon je n'arrive pas à l'utiliser sous kino pour récupérer mes vidéos
en dv.
Peut-il y avoir des barrettes RAM incompatibles,
pourtant identiques, sur le même PC ? :
DDR 400 3200B 2 X 184 pins
DDR 400 3200R 2 X 184 pins
DDR 400 3200 2 X 184 pins
Serait-ce la lettre après 3200 : B , R ou rien ?
Les B marchent, mais pas les R.
3200R :
Le PC démarre, aucun message,
[EMAIL PROTECTED] a écrit :
Peut-il y avoir des barrettes RAM incompatibles,
pourtant identiques, sur le même PC ? :
DDR 400 3200B 2 X 184 pins
DDR 400 3200R 2 X 184 pins
DDR 400 3200 2 X 184 pins
Serait-ce la lettre après 3200 : B , R ou rien ?
sans doute une réf particulière au
DDR 400 3200B 2 X 184 pins
DDR 400 3200R 2 X 184 pins
DDR 400 3200 2 X 184 pins
Serait-ce la lettre après 3200 : B , R ou rien ?
--
sans doute une réf particulière au fondeur pour les RAS CAS
soit elle est morte, soit ses timings ne sont pas supportés par la
[EMAIL PROTECTED], samedi 28 juin 2008, 15:46:56 CEST
Peut-il y avoir des barrettes RAM incompatibles,
pourtant identiques, sur le même PC ? :
DDR 400 3200B 2 X 184 pins
DDR 400 3200R 2 X 184 pins
DDR 400 3200 2 X 184 pins
Serait-ce la lettre après 3200 : B , R ou rien ?
Les B
[EMAIL PROTECTED] a écrit :
DDR 400 3200B 2 X 184 pins
DDR 400 3200R 2 X 184 pins
DDR 400 3200 2 X 184 pins
Serait-ce la lettre après 3200 : B , R ou rien ?
--
sans doute une réf particulière au fondeur pour les RAS CAS
soit elle est morte, soit ses timings ne sont pas
par ailleurs, tu dis qu'elle tournent normalement sur un *serveur*, le
R doit-être pour registered: soit tu as l'option voulue dans ton BIOS
(ECC) et tu l'actives et ça marcheras; soit tu ne l'as pas, auquel cas elle
ne fonctionneront jamais sur ta carte.
Il n'y a
[EMAIL PROTECTED] a écrit :
par ailleurs, tu dis qu'elle tournent normalement sur un *serveur*, le
R doit-être pour registered: soit tu as l'option voulue dans ton BIOS
(ECC) et tu l'actives et ça marcheras; soit tu ne l'as pas, auquel cas elle
ne fonctionneront jamais sur ta carte.
Am 2008-06-23 18:27:57, schrieb Alain Vaugham:
Bonjour la liste,
Par habitude j'utilise top pour tuer un processus. Exemple:
$ top | grep spamd
Dans le cas présent :
$ top | grep minicom
n'affiche rien car ce ne doit pas être le bon nom.
Comment je peux m'en sortir pour tuer Minicom
Salut Jean-Michel,
Am 2008-06-25 14:50:36, schrieb Jean-Michel OLTRA:
Bonjour,
J'ai un souci avec ce /etc/bash.bashrc.
Avec ce fichier en place, les ~/.bashrc ne sont pas sourcés, donc plus
aucun paramétrage perso.
Si je renomme ce fichier, alors tout redevient comme avant,
Il n'y a aucun réglage sous mon BIOS pour la mémoire,
mais il m'affiche : 166 Mhz et DDR 333 !
alors que il est marqué sur étiquette DDR 400 sur la barrette.
---
wai, c'est une feature connue sur certaines cartes: lorsque les banques
de RAM sont pleines, la vitesse
[EMAIL PROTECTED] a écrit :
Il n'y a aucun réglage sous mon BIOS pour la mémoire,
mais il m'affiche : 166 Mhz et DDR 333 !
alors que il est marqué sur étiquette DDR 400 sur la barrette.
---
wai, c'est une feature connue sur certaines cartes: lorsque les banques
de RAM
Le Saturday 28 June 2008 02:02:41 Michelle Konzack, vous avez écrit :
Am 2008-06-23 18:27:57, schrieb Alain Vaugham:
Bonjour la liste,
Par habitude j'utilise top pour tuer un processus. Exemple:
$ top | grep spamd
Dans le cas présent :
$ top | grep minicom
n'affiche rien car ce ne
Buenos días,
llega el verano y con ello las vacaciones para los que vivimos en el
viejo continente.
Ahora que hay algo de tiempo libre os propongo una idea: ayudar a
traducir Debian.
Muchas veces no se da la suficiente importancia a que los sistemas
estén traducidos, pero la realidad es que da
On Sat, Jun 28, 2008 at 4:01 PM, Ignacio Mondino [EMAIL PROTECTED]
wrote:
Maximiliano Marin Bustos wrote:
Aqui recien comienza el invierno =(
Pero igual no mas .. a echarle ganas no mas!
Saludos
Te acompaño en el sentimiento, de todas formas que mejor forma de encarar
el frio que una
Hola
Alguien ha instalado Testing recientemente?
Quisiera saber, como configurar la siguiente tarjeta:
debian:/home/francisco# lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51 [Geforce 6150
Go] (rev a2)
Si hago # dpkg-reconfigure xserver-xorg, no logro nada, y si hago #
Title: Manfra Cia. Ltda.
Obrigado pela atenção, Fabiano.
Todos os programas que eu instalei o fiz com o aptitude. Daria pra
atualizar estes programas para suas versões 64bits? Caso não dê, usando
somente o kernel de 64bits haveria algum ganho de performance?
Fabiano Manoel de Andrade
Este comportamento de ele não mostrar o pedido de login é realmente o
getty que não está sendo acessado, ou não está esperando conexões.
Você já tentou usar outro programa que não o Hyper Terminal? Aqui eu uso
o minicom em um notebook rodando debian e funciona direitinho. E, quando
tentei
Olá a todos,
vejam isso :
http://www.baboo.com.br/absolutenm/templates/content.asp?articleid=32370zoneid=221resumo=
isso parece verdade e pode ser desabilitado, vejam no proprio site da
Mozilla:
http://support.mozilla.com/fr/kb/Firefox+makes+unrequested+connections
Isso foi detectado
* Konnichiwa Luciana Sousa-sama:
Olá a todos,
vejam isso :
http://www.baboo.com.br/absolutenm/templates/content.asp?articleid=32370zoneid=221resumo=
isso parece verdade e pode ser desabilitado, vejam no proprio site da
Mozilla:
Still escreveu:
* Konnichiwa Luciana Sousa-sama:
vejam isso :
http://www.baboo.com.br/absolutenm/templates/content.asp?articleid=32370zoneid=221resumo=
isso parece verdade e pode ser desabilitado, vejam no proprio site da
Mozilla:
Luciana Sousa escreveu:
vejam isso :
http://www.baboo.com.br/absolutenm/templates/content.asp?articleid=32370zoneid=221resumo=
http://www.baboo.com.br/absolutenm/templates/content.asp?articleid=32370zoneid=221resumo=
isso parece verdade e pode ser desabilitado, vejam no proprio site da
Em Sáb, 2008-06-28 às 08:33 -0300, Paulo escreveu:
Obrigado pela atenção, Fabiano.
Todos os programas que eu instalei o fiz com o aptitude. Daria pra
atualizar estes programas para suas versões 64bits? Caso não dê,
usando somente o kernel de 64bits haveria algum ganho de performance?
Olá Lista,
Vcs conhecem algum software para controle juridico feito em PHP com MySQL que
seja open source, para rodar no linux ?
##
# Gustavo V. Goulart #
# Linux Debian Sarge #
##
Novos endereços, o Yahoo! que
Em Sáb, 28/06/2008 10:51, Gustavo Goulart escreveu:
Vcs conhecem algum software para controle juridico feito em PHP com
MySQL que seja open source, para rodar no linux ?
Veja o Legal Case Management:
http://www.lcm.ngo-bg.org/en
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
Olá,
Uso Debian Sid com o driver proprietário da Nvidia. Recentemente após uma
atualização do xorg, perdi a aceleração 3D, isso ocorre sempre, porém dessa
vez,
quando tento acessar o terminal (Ctrl+Alt+F1), no lugar das letras tem
quadrados verdes, não dá pra ler nada.
Com isso não consigo
Grande Júnior,
Resolveu meu problema! Muito obrigado!
Att,
Tony
On Fri, Jun 27, 2008 at 8:55 AM, Anacleto Pavão [EMAIL PROTECTED]
wrote:
procure informações sobre firewall/proxy utilizando o PpTables/Squid. Boa
sorte.
Em: www.vivaolinux.com.br
--- Em *sex, 27/6/08, Antognoni
Em Sat, 28 Jun 2008 16:08:05 -0300
Elias Diniz [EMAIL PROTECTED] escreveu:
Olá,
Uso Debian Sid com o driver proprietário da Nvidia. Recentemente após
uma atualização do xorg, perdi a aceleração 3D, isso ocorre sempre,
porém dessa vez,
quando tento acessar o terminal (Ctrl+Alt+F1), no
Elias Diniz escreveu:
quando tento acessar o terminal (Ctrl+Alt+F1), no lugar das letras tem
quadrados verdes, não dá pra ler nada.
Com isso não consigo reinstalar o driver da Nvidia.
Dê boot pela opção single-user mode disponível no Grub, porém o acesso
será limitado, tanto é que os discos
2008/6/28 Gunther Furtado [EMAIL PROTECTED]:
Em Sat, 28 Jun 2008 16:08:05 -0300
Elias Diniz [EMAIL PROTECTED] escreveu:
Olá,
Uso Debian Sid com o driver proprietário da Nvidia. Recentemente após
uma atualização do xorg, perdi a aceleração 3D, isso ocorre sempre,
porém dessa vez,
2008/6/28 Renato S. Yamane [EMAIL PROTECTED]:
Elias Diniz escreveu:
quando tento acessar o terminal (Ctrl+Alt+F1), no lugar das letras tem
quadrados verdes, não dá pra ler nada.
Com isso não consigo reinstalar o driver da Nvidia.
Dê boot pela opção single-user mode disponível no Grub,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 28-06-2008 21:09, Elias Diniz wrote:
Eu tenho interface gráfica, o gdm carrega normalmente, apenas não tenho
acesso aos modo texto através dos comandos Ctrl+Alt+F1.
Posso abrir um emulador de terminal como o gnome-terminal ou konsole,
porém o
Elias Diniz escreveu:
Renato S. Yamane escreveu:
Eu montaria o disco e editaria o xorg.conf para o usar o driver genérico
nv ao invés do driver da NVidia.
Eu tenho interface gráfica, o gdm carrega normalmente, apenas não tenho
acesso aos modo texto através dos comandos Ctrl+Alt+F1.
Então
2008/6/28 Felipe Augusto van de Wiel (faw) [EMAIL PROTECTED]:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Então mude pra vesa, remova o driver da nvidia,
reinicie o computador e faça a correção/atualização.
Abraço,
- --
Felipe Augusto van de Wiel (faw)
Debian. Freedom to code.
2008/6/28 Elias Diniz [EMAIL PROTECTED]:
2008/6/28 Felipe Augusto van de Wiel (faw) [EMAIL PROTECTED]:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Então mude pra vesa, remova o driver da nvidia,
reinicie o computador e faça a correção/atualização.
Abraço,
- --
Felipe
isso eh interressante.. eu gostaria de saber tbm se funcionam os modens no
linux, pois estou para comprar um, mas preciso ter alguma certeza de que ira
funcionar...hehehe...
ps: utilizo o slackware...
2008/6/26 Fernando Ike de Oliveira [EMAIL PROTECTED]:
Em Thu, 26 Jun 2008 13:53:29 -0300
controle juridico? como assim meo?
explica um poco melhor ai vlw...
2008/6/28 Gustavo Goulart [EMAIL PROTECTED]:
Olá Lista,
Vcs conhecem algum software para controle juridico feito em PHP com MySQL
que seja open source, para rodar no linux ?
##
#
* Konnichiwa Junior Polegato - Linux-sama:
Olá,
De acordo com as informações, é enviado:
- IP do computador (óbvio, internet é sobre IP)
- Hora local (?, deve ser para saber de onde...)
- Versão do produto utilizado (analisar se tem versão nova, mas o
processo poderia ser
Para tirar seu nome da lista envie um e-mail para: to
[EMAIL PROTECTED]
Observe que no final de todos os e-mails do grupo aparece isso.
Em Sex, 2008-06-27 às 09:05 -0300, Gunther Furtado escreveu:
2008/6/27 Alexandre Lopes [EMAIL PROTECTED]:
Favor retirar meu email de vossa lista
Hi,
What tools should I use for the following:
- ripping a cd
- burning a cd
- ripping a dvd
- burning a dvd
I used ripit for ripping a cd, is this a good tool? It seemed to go
quite slow, but was ok.
- Will wodim burn audio cds? Is this the best tool to use?
I ripped a dvd with 'dvdbackup' is
Kamaraju S Kusumanchi wrote:
H.S. wrote:
guys. In C++, do the names of arguments in a function declaration (or
prototype) need to match the names of the arguments in function
definition?
They don't need to match (either in C or in C++). The function declarations
Thanks for the detailed
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 06/27/08 23:23, Kamaraju S Kusumanchi wrote:
Ron Johnson wrote:
It doesn't matter that I have used 'i' in the declaration and 'j' in the
definition, does it?
What happens if you create a small test program and try it out?
Oh come on! H.S.
Daniel Dalton wrote:
Hi,
What tools should I use for the following:
I am sure there are multiple choices. But here goes a starting point:
- ripping a cd
grip
- burning a cd
k3b (does everything), or wodim for command line
- ripping a dvd
Never did this really, but try dvdbackup.
On Sat, Jun 28, 2008 at 02:36:19AM -0400, H.S. wrote:
- ripping a cd
grip
Thanks, will try that.
- burning a cd
k3b (does everything), or wodim for command line
Isn't k3b qt based (kde)?
- ripping a dvd
Never did this really, but try dvdbackup. Further, try:
$ apt-cache search rip
On Friday 27 June 2008 11:57:21 pm Daniel Dalton wrote:
Isn't k3b qt based (kde)?
Yes, it is. For a Gtk based burning application, take a look at Brasero. wodim
is very easy to use, though, and the man page contains examples of most use
cases (including audio files).
--
Lee Glidewell
On Sat, Jun 28, 2008 at 12:07:24AM -0700, Lee Glidewell wrote:
On Friday 27 June 2008 11:57:21 pm Daniel Dalton wrote:
Isn't k3b qt based (kde)?
Yes, it is. For a Gtk based burning application, take a look at Brasero.
wodim
Can that do dvds? (that will play in all dvd players?)
Thanks,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 06/28/08 01:24, Daniel Dalton wrote:
Hi,
What tools should I use for the following:
- ripping a cd
abcde, which is a great CLI tool.
- burning a cd
In GNOME, I haven't had success burning ISO images to CD.
- ripping a dvd
For what
On Saturday 28 June 2008 12:31:55 am Daniel Dalton wrote:
Yes, it is. For a Gtk based burning application, take a look at Brasero.
wodim
Can that do dvds? (that will play in all dvd players?)
Yes, it can. That said, whether or not it plays in a DVD player is more a
function of the file
On Wed, Jun 25, 2008 at 06:26:07PM +0200, Michelle Konzack wrote:
Salut AP,
Am 2008-06-25 13:54:37, schrieb Andrei Popescu:
On Tue, Jun 24, 2008 at 06:12:30PM -0400, Michael Pobega wrote:
Getmail is pretty good, it's a bit slower than fetchmail but it works.
Did you test or is
On 06/27/2008 11:30 PM, Kamaraju S Kusumanchi wrote:
[...]
I think that C++ or any programming related questions are appropriate on
this list. [...]
With all due respect Mr. Kusumanchi, you're wrong.
http://clipmarks.com/clipmark/2D078D31-24DA-4CC9-A3D2-E90325AC2817/
,Hello world'
I am using Sid, not ready for Lenny and far away from stable release;
Give me some time;
end;
__
Not happy with your email address?.
Get the one you really want - millions of new email addresses available now at
Yahoo!
On Sat, Jun 28, 2008 at 12:39:40AM -0700, Lee Glidewell wrote:
On Saturday 28 June 2008 12:31:55 am Daniel Dalton wrote:
Yes, it is. For a Gtk based burning application, take a look at Brasero.
wodim
Can that do dvds? (that will play in all dvd players?)
Yes, it can. That said,
Daniel Dalton wrote:
On Sat, Jun 28, 2008 at 12:39:40AM -0700, Lee Glidewell wrote:
On Saturday 28 June 2008 12:31:55 am Daniel Dalton wrote:
Yes, it is. For a Gtk based burning application, take a look at Brasero.
wodim
Can that do dvds? (that will play in all dvd players?)
Yes, it can.
On Friday 27 June 2008, Daniel Dalton wrote:
Hi,
What tools should I use for the following:
- ripping a cd
- burning a cd
- ripping a dvd
- burning a dvd
I used ripit for ripping a cd, is this a good tool? It seemed to go
quite slow, but was ok.
- Will wodim burn audio cds? Is this the
On 27 Jun 2008, at 23:49, Star Liu wrote:
On lenny amd64, I often get the prompt to install flash plugin, but
result in unknown plugin... x-shockwave-flash, how could i fix it?
Thanks!
For etch, (from memory so check the package names) I downloaded some
ia32 libs and nspluginwrapper and
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 06/28/08 03:13, Daniel Dalton wrote:
On Sat, Jun 28, 2008 at 12:39:40AM -0700, Lee Glidewell wrote:
On Saturday 28 June 2008 12:31:55 am Daniel Dalton wrote:
Yes, it is. For a Gtk based burning application, take a look at Brasero.
wodim
Can
Hi Debian users
I am running a forum with small video clips (from YouTube and others). I
convert those Macromedia Flash videos with:
$ mencoder example.flv -ovc xvid -xvidencopts bitrate=1000:autoaspect
-vf pp=lb -oac mp3lame -lameopts fast:preset=standard -o example.avi
I use mencoder RPM
Funny issue here: when I launch gtk apps like Gimp, Sonata, gThumb from KMenu,
kicker quick launcher or run command the gtk theme is not applied.
When I run from a terminal, all fine.
Created a new user account, fired up a kde session - all fine there, too.
Any idea how come?
Dex
--
-BEGIN
$ mencoder example.flv -ovc xvid -xvidencopts bitrate=1000:autoaspect
-vf pp=lb -oac mp3lame -lameopts fast:preset=standard -o example.avi
1) Its very generic command line to convert videos. What would you
improve?
What's improve? Only the file size or also the quality?
The size is much
I'm afraid ia32 libs won't support amd64, i heard that no solution provided
for x86_64 cpus, but not sure.
On Sat, Jun 28, 2008 at 6:06 PM, michael [EMAIL PROTECTED]
wrote:
On 27 Jun 2008, at 23:49, Star Liu wrote:
On lenny amd64, I often get the prompt to install flash plugin, but result
On Sat, 28 Jun 2008 13:58:01 +0200
Dexter Filmore [EMAIL PROTECTED] wrote:
Hello Dexter,
Funny issue here: when I launch gtk apps like Gimp, Sonata, gThumb
from KMenu, kicker quick launcher or run command the gtk theme is
not applied. When I run from a terminal, all fine.
In KDE Control
Hello,
I've upgraded a Dell D820 (laptop) to 2.6.24 2.6.25 kernel with Debian (so
standard kernel).
But with that kernel, the machine doesn't boot anymore. He can't find the
disks (/dev/sda* in my case) anymore.
With the older 2.6.23, this still works.
Somebody who has the same problem?
Bart
Hi
I cannot seem to get VLC to display the video when I am playing it.
Instead, it only seems to play it as an audio file. The progress bar
moves, but there is no video display. The settings seem to be fine, at
least to my untutored eye. This is the same regardless of the format I
am playing
But with that kernel, the machine doesn't boot anymore. He can't find the
disks (/dev/sda* in my case) anymore.
Is there initrd?
Have you tried with make oldconfig?
Pol
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hi,
Google searching is (still?) primitive.
I would like to know the answer to a simple question:
What are the most recent laptops that run Linux *and* have a working
analog (RJ-11) modem installed?
Listed by highest price first.
Hugo
PS All the searching I have done lead me to believe
El sáb, 28-06-2008 a las 13:56 +0100, andy escribió:
Hi
I cannot seem to get VLC to display the video when I am playing it.
Instead, it only seems to play it as an audio file. The progress bar
moves, but there is no video display. The settings seem to be fine, at
least to my untutored
andy wrote:
Hi
I cannot seem to get VLC to display the video when I am playing it.
Instead, it only seems to play it as an audio file. The progress bar
moves, but there is no video display. The settings seem to be fine, at
least to my untutored eye. This is the same regardless of the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 06/28/08 07:56, andy wrote:
Hi
I cannot seem to get VLC to display the video when I am playing it.
Instead, it only seems to play it as an audio file. The progress bar
moves, but there is no video display. The settings seem to be fine, at
On Sat, Jun 28, 2008 at 01:56:50PM +0100, andy wrote:
Hi
I cannot seem to get VLC to display the video when I am playing it.
Instead, it only seems to play it as an audio file. The progress bar
moves, but there is no video display. The settings seem to be fine, at
least to my untutored
On Sat, Jun 28, 2008 at 01:28:47PM +0200, Simon Jolle sjolle wrote:
I am running a forum with small video clips (from YouTube and others). I
convert those Macromedia Flash videos with:
Under US law, you may want to think about copyright issues. I don't know
about any other country's laws.
On Sat, Jun 28, 2008 at 2:59 PM, Hugo Vanwoerkom [EMAIL PROTECTED] wrote:
Hi,
Google searching is (still?) primitive.
I would like to know the answer to a simple question:
What are the most recent laptops that run Linux *and* have a working analog
(RJ-11) modem installed?
Listed by
James Youngman wrote:
On Sat, Jun 28, 2008 at 2:59 PM, Hugo Vanwoerkom [EMAIL PROTECTED] wrote:
Hi,
Google searching is (still?) primitive.
I would like to know the answer to a simple question:
What are the most recent laptops that run Linux *and* have a working analog
(RJ-11) modem
Kamaraju S Kusumanchi wrote:
andy wrote:
Hi
I cannot seem to get VLC to display the video when I am playing it.
Instead, it only seems to play it as an audio file. The progress bar
moves, but there is no video display. The settings seem to be fine, at
least to my untutored eye. This is the
El sáb, 28-06-2008 a las 16:51 +0100, andy escribió:
Kamaraju S Kusumanchi wrote:
andy wrote:
Hi
I cannot seem to get VLC to display the video when I am playing it.
Instead, it only seems to play it as an audio file. The progress bar
moves, but there is no video display. The
I have a mini case with a VIA motherboard and CPU. It has an on-board
ethernet port. I'd like to use it as a Linux firewall/NAT router to replace
the (wired only) LinkSys I have now. It only has one PCI slot, but I want
to be able to provide both wired and wireless LAN access. I'm looking for
both
On Sat, 28 Jun 2008 03:28:09 + (UTC)
[EMAIL PROTECTED] wrote:
On lenny amd64, I often get the prompt to install flash plugin, but
result in unknown plugin... x-shockwave-flash, how could i fix it?
Thanks!
Do you have the multimedia repository in your sources.list? If not,
add
deb
On Sat, Jun 28, 2008 at 01:27:20PM -0300, Gabriel Parrondo wrote:
Of course you could also downgrade to last debian-multimedia compatible
version if you have other packages that depend on ffmpeg, libavcodec51
and friends.
That seemed like a lot of trouble to me, so I just switched to totem.
Hi,
Is it a known bug? How could I work it around? though i can use amsn
instead, but i prefered pidgin.
sorry I cannot really help you, but aMSN (in etch) doesn't work, either
since some days. In the aMSN forum I read that it's not a server issue
but an issue of aMSN itself. Anyhow, something
Simon Jolle sjolle:
1) Its very generic command line to convert videos. What would you
improve? The size is much bigger than the original FLV :(
Why do you convert in the first place? Re-encoding files with a lossy
codec can only degrade their quality, no matter what bitrate you are
using.
Daniel Dalton wrote:
Well, it is legal, all dvds belong to me, and others are just other
people's home movies...
So, mostly for backing up on other disks and on my hard drive and as I
said home movies.
(and im just playing with this stuff for a bit of fun)
I didn't try to hint that you were
Daniel Dalton wrote:
So, do I need to create the video_ts folder into an iso image and then
burn the iso?
hmm .. other should correct me if I am wrong, but I don't think you
really need to create the ISO image of a folder containing the VIDEO_TS
folder. Just copying the VIDEO_TS (and the
On 06/28/2008 01:59 PM, Pol Hallen wrote:
What's improve? Only the file size or also the quality?
IMHO the quality of the original FLV is the same as my converted AVI. So
I only need to improve file size
Sure! U do the coding at 1000kb/s
I remember that flv files (from youtube) are about
On 06/28/2008 08:28 PM, Jochen Schulz wrote:
Why do you convert in the first place? Re-encoding files with a lossy
codec can only degrade their quality, no matter what bitrate you are
using.
I know that re-encoding degrades the quality. But my eyes don't see the
difference :-)
I already
On 06/28/2008 04:36 PM, Carl Fink wrote:
Under US law, you may want to think about copyright issues. I don't know
about any other country's laws.
Good input.
There's a Debian packaged mencoder at debian-multimedia.org. Just add that
repository to your sources.list.
thanks.
It's going
On 27 Jun., 19:30, Jeff Soules [EMAIL PROTECTED] wrote:
Hi all,
Hi!
After install, I attempt to start X using startx. A few lines of text flash
on the screen, then it blacks out and the system buzzer gives me one
short beep. I cannot alt-Fx to any other terminal and lose the terminal
I'm
On 28-jun-2008, at 18:30, Gregory Seidman wrote:
I have a mini case with a VIA motherboard and CPU. It has an on-board
ethernet port. I'd like to use it as a Linux firewall/NAT router to
replace
the (wired only) LinkSys I have now. It only has one PCI slot, but
I want
to be able to provide
* Hugo Vanwoerkom [EMAIL PROTECTED] [2008 Jun 28 09:01 -0500]:
I can't answer except from personal experience. The former Lucent now
Agere chipset seems well supported by the Martian Modem driver in
Non-free. I have Thinkpads 390e and T23 with that chipset and nary a
problem. I know they're
On Sat, Jun 28, 2008 at 12:34:50PM -0700, Memnon Anon wrote:
On 27 Jun., 19:30, Jeff Soules [EMAIL PROTECTED] wrote:
Hi all,
Hi!
After install, I attempt to start X using startx. A few lines of text flash
on the screen, then it blacks out and the system buzzer gives me one
short beep.
I am trying to do a network install of Debian 4.0r3 and unfortunately
I am receiving a message about modules unavailable.
This the part of installation dialog with the messages.
//
No kernel modules were found. This probably is due
Thanks for the help so far, everyone.
I have retried using both of the generic drivers. Now I'm getting a
fatal server error -- no screens found.
Still not working, but at least it's enough to start me on further
research.
The monitor in question is an Acer 22 lcd, if anyone out there
I am trying to do a network install of Debian 4.0r3 and unfortunately
I am receiving a message about modules unavailable.
This the part of installation dialog with the messages.
//
No kernel modules were found. This probably is due
Simon Jolle sjolle:
On 06/28/2008 08:28 PM, Jochen Schulz wrote:
Why do you convert in the first place? Re-encoding files with a lossy
codec can only degrade their quality, no matter what bitrate you are
using.
I know that re-encoding degrades the quality. But my eyes don't see the
oneman wrote:
On 28-jun-2008, at 18:30, Gregory Seidman wrote:
I have a mini case with a VIA motherboard and CPU. It has an on-board
ethernet port. I'd like to use it as a Linux firewall/NAT router to
replace
the (wired only) LinkSys I have now. It only has one PCI slot, but I want
to be
Simon Jolle sjolle:
It means AVI is the best choice for out-of-the-box playing on all
platforms and devices?
AVI is only a container for audio and video content. It can contain
video encoded in many formats (MPEG2, MPEG4, H.264 etc). Just because a
player knows the container format doesn't
Jochen Schulz:
Simon Jolle sjolle:
How accepted is Ogg Theora in Non-Geek environments?
Not at all. It is even quite uncommon in non-geek environments.
Of course I meant to write even quite uncommon on geek environments.
J.
--
When I am at nightclubs I enjoy looking at other people and
I ve found the next link
http://www.hoernerfranzracing.de/kde/ldap.html?PHPSESSID=512fcd85b4816ca869bcb3c8ab2d35e5that
explains it.
the strange thing is that names in hebrew are deleated from the kaddressbook
file.
--- Jabka Atu ===---
bsh83.blogspot.com
---=== Encryption is a way of
On Sun, Jun 29, 2008 at 12:15:15AM +0200, Jochen Schulz wrote:
Quoting me, but with attribution removed.
BTW, I convert FLV to AVI with this command line:
ffmpeg -i filename.flv -sameq filename.avi
This converts to MPEG4 (ffmpeg's default choice, at least on my system)
in an AVI
The instalation log:
Jun 28 23:37:58 main-menu[689]: INFO: Modifying debconf priority limit
from 'high' to 'medium'
Jun 28 23:37:58 debconf: Setting debconf/priority to medium
Jun 28 23:37:58 main-menu[689]: DEBUG: resolver (libc6): package
doesn't exist (ignored)
Jun 28 23:38:02 main-menu[689]:
El sáb, 28-06-2008 a las 16:57 -0400, Jeff Soules escribió:
Thanks for the help so far, everyone.
I have retried using both of the generic drivers. Now I'm
getting a
fatal server error -- no screens found.
Still not working, but at least it's enough to
On Sat, 28 Jun 2008 15:45:13 +0100
James Youngman [EMAIL PROTECTED] wrote:
On Sat, Jun 28, 2008 at 2:59 PM, Hugo Vanwoerkom [EMAIL PROTECTED] wrote:
Hi,
Google searching is (still?) primitive.
I would like to know the answer to a simple question:
What are the most recent laptops
1 - 100 of 112 matches
Mail list logo