Bonjour,
excuses-moi Daniel, j'aurais dû en effet commencer par là.
En fait, je vois le problème en lisant les message de debug de linphone.
En fait, derière mon routeur (ailleurs, ça marche parfaitement),
ortp résoud le dns de freephonie.net ;
puis envoie son message de connexion sip à mon
Le 23 avril 2011, Jean-Jacques Doti a écrit :
Salut,
On Sat, 23 Apr 2011 17:03:29 +0200, Alain Rpnpif wrote:
Bonjour,
Depuis toujours quand je mettais en première ligne d'un script python
:
#!/usr/bin/python
Python était lancé sur le script.
Pourquoi maintenant (Debian
Le 24 avril 2011, Antoine Vagabonddurail a écrit :
Bonjour,
je viens de faire un tesst peut-être intéressant.
A un ami situé également en Turquie et utilisant également gmail j'ai
envoyé 2 mails.
Le premier directement depuis ma liste de contact ;
le second en répondant à un de ses mails
Le 25/04/2011 09:17, Antoine Vagabonddurail a écrit :
Bonjour,
Bonjour
[...]
En fait, derière mon routeur (ailleurs, ça marche parfaitement),
Ton routeur étant la cause du problème et ne le connaissant pas, je ne
peux plus t'aider. Éventuellement tu peux jouer avec la MTU (la baisser
1492
Je suis passé de squeeze a wheezy sans problème. Sauf que maintenant je ne peux
télécharger les mises en jour (Actuellement 177 mises a jour sont impossibles a
télé charger. J'obtiens les messages suivants :
installation interrompue
le sous processus script post-installation install a retourné
Le Mon, 25 Apr 2011 11:22:41 +0200 (CEST),
Albert DURANTON albert.duranton...@orange.fr a écrit :
bonjour
Je suis passé de squeeze a wheezy sans problème. Sauf que maintenant
je ne peux télécharger les mises en jour (Actuellement 177 mises a
jour sont impossibles a télé charger. J'obtiens les
Bonjour,
la commande whois IP ne fonctionne plus sur ma Debian Lenny 32 bits
(quelquesoit le n° IP)
Une fois la commande tapée [entrer],
le curseur se place en dessous, sans réponse ... = CTRL-C ...
Merci.
--
Lisez la FAQ de la liste avant de poser une question :
Bonjour,
Je suis passé de squeeze a wheezy sans problème. Sauf que maintenant
je ne peux télécharger les mises en jour (Actuellement 177 mises a
jour sont impossibles a télé charger. J'obtiens les messages suivants
: installation interrompue le sous processus script post-installation
install
Albert DURANTON albert.duranton...@orange.fr writes:
Je suis passé de squeeze a wheezy sans problème. Sauf que maintenant
je ne peux télécharger les mises en jour (Actuellement 177 mises a
jour sont impossibles a télé charger. J'obtiens les messages suivants
:
installation interrompue
le
On Mon, Apr 25, 2011 at 12:12:03PM +0200,
cor...@free.fr cor...@free.fr wrote
a message of 17 lines which said:
la commande whois IP ne fonctionne plus sur ma Debian Lenny 32
bits (quelquesoit le n° IP)
% cat /etc/debian_version
5.0.8
% whois 87.88.6.218
..
inetnum:87.88.6.0 -
Le lundi 25 avril 2011, Stephane Bortzmeyer a écrit :
On Mon, Apr 25, 2011 at 12:12:03PM +0200,
cor...@free.fr cor...@free.fr wrote
a message of 17 lines which said:
la commande whois IP ne fonctionne plus sur ma Debian Lenny 32
bits (quelquesoit le n° IP)
% cat /etc/debian_version
On Mon, Apr 25, 2011 at 10:55:46PM +0200,
cor...@free.fr cor...@free.fr wrote
a message of 47 lines which said:
# strace whois 87.88.6.218
J'ai oublié de dire qu'un -f après strace aurait aidé.
connect(3, {sa_family=AF_INET6, sin6_port=htons(43),
inet_pton(AF_INET6,
J'ai oublié de dire qu'un -f après strace aurait aidé :
strace -f whois 87.88.6.218
socket(PF_INET6, SOCK_STREAM, IPPROTO_TCP) = 3
connect(3, {sa_family=AF_INET6, sin6_port=htons(43),
inet_pton(AF_INET6, 2001:67c:2e8:22::c100:687, sin6_addr), sin6_flowinfo=0,
sin6_scope_id=0}, 28
(blocage ...)
Bonjour,
merci encore Daniel, je me doute qu'il daudrait plus d'éléments pour avancer.
En fait, mon routeur est un speedstream 5200.
Un modem/routeur DSL ethernet/usb que j'ai récupéré ici en Turquie en
second main,
et quand je dis second main c'est certainement un dous euphémisme.
La chose se
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
EMNI Yoan García Cáceres escribió:
Hola lista.
Tengo un servidor de salvas bacula. El mismo hace las salvas bien.
Existe algun sofware que sea capaz de reconocer un volumen de bacula
y manipularlo osea leer copiar archivos etc... ?
Buenos
El Sun, 24 Apr 2011 23:23:46 +0200, AngelD escribió:
Sun, 24 Apr 2011, Usuario Debian:
La buena noticia es que Google esta dando pasas para olvidar Flash y
usar estandares abiertos en relacion a video en internet, ya queda
menos!
Que San W3C te oiga :-)
Bueno, si crees que a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
jmramirez (mas_ke_na) escribió:
Mediante la interface BAT no puedo restaurar archivos de hace un mes o
dos meses atras, en el *version browser* solo me deja marcar los del mes
actual, por que??
Buenas.
Ahora que estoy mas
El 25/04/11 07:45, Camaleón escribió:
El Sun, 24 Apr 2011 23:23:46 +0200, AngelD escribió:
Sun, 24 Apr 2011, Usuario Debian:
La buena noticia es que Google esta dando pasas para olvidar Flash y
usar estandares abiertos en relacion a video en internet, ya queda
menos!
Que San W3C te oiga
El 24 de abril de 2011 12:18, Camaleón noela...@gmail.com escribió:
El 2011-04-24 a las 10:48 -0600, Carlos Alvarez escribió:
(reenvío)
Yo hace poco tenia un problema similar. Instale con KDE, luego de esto
entre
en modo recovery y desinstale el KDE, par volver a instalarlo. Luego de
From: listas_quij...@hotmail.com
To: debian-user-spanish@lists.debian.org
Subject: Problema con Lenny+Samba+Ldap como pDC
Date: Mon, 25 Apr 2011 18:10:26 +
Estoy tratando de montar un server con samba como PDC usando a openldap para
autentificarme en mi red de windows pero esto ha
- Original Message -
From: Juan Wifi jawif...@gmail.com
To: BasaBuru basab...@basatu.org
Cc: debian-user-spanish@lists.debian.org
Sent: Friday, April 22, 2011 7:23 PM
Subject: Re: OpenOffice 3.3 [desẗrolliandonos]
Este comentario fue una tremenda estupidez. Ahora, los cubanos no se
Gente tengo el siguiente instale en una portátil algo vieja un debian 6. A
eso le puse lxde. Ahora la cuestión es que quiero evitar que en la pantalla
de login o acceso cuando te pide usuario y contraseña me figure el usuario
que existe. Me acuerdo que eso se solucionaba de diferente formas. Por
Que hilo tan eterno parenlo porfavor creo que hay otros espacios
para que discutan, mandense privados que se yo, pero este hilo ya no tiene
nada del título, Openoffice 3.3 LO RECUERDAN de eso era el hilo.
2011/4/25 Pablo pablocar...@gmail.com:
Gente tengo el siguiente instale en una portátil algo vieja un debian 6. A
eso le puse lxde. Ahora la cuestión es que quiero evitar que en la pantalla
de login o acceso cuando te pide usuario y contraseña me figure el usuario
que existe. Me acuerdo que
2011/4/25 Carlos Zuniga carlos@gmail.com
La configuración es en el gdmsetup, si es diferente en la otra distro
Probando el gdmsetup me pasa lo mismo. Me sale una versión del mismo, pero
por alguna extraña razón no me aparecen las mismas opciones que tengo en una
maquina en donde si puedo
El día 25 de abril de 2011 16:52, Juan Pablo Jaramillo Pineda
juanpablo...@gmail.com escribió:
Que hilo tan eterno parenlo porfavor creo que hay otros espacios
para que discutan, mandense privados que se yo, pero este hilo ya no tiene
nada del título, Openoffice 3.3 LO RECUERDAN de
Hola trabajo en pg y me pidieron que eligiera unas LTO y un SAN para
comprar... preferiblemente HP (aunque nuestros servidores son IBM...
sin embargo no creo que haya problemas). Necesito que me digan sobre
un sitio que me recomienden, yo he buscado pero mi problema es que no
se si tengan soporte
Tengo un portatil antiguo Aopem 1557 con Debian Testing, para levantar la
red wifi necesita instalar el módulo acerhk que mapea las teclas especiales
y una de ella es la de la red inalambrica. Con el kernel 2.6.32-5 se instaló
perfectamente con module-assistant.
Ha estado funcionando hasta que se
colega comienza desde el inicio, pero siguiendo esta guía
http://www.esdebian.org/wiki/controlador-primario-dominio-pdc-debian-lenny-50-mediante-samba-pamnss-openldap
y me dices.
El lun, 25-04-2011 a las 18:23 +, Edwin Quijada escribió:
Hola gente: al final pude solucionar el problema que tenía en esta red...
El 14/04/11 14:36, Roberto Quiñones escribió:
Estimado,
El día 14 de abril de 2011 14:21, Walter O. Dariwlin...@gmail.com escribió:
Hola Roberto:
El 14/04/11 14:06, Roberto Quiñones escribió:
cuando asignastes la ip
Se a partição tiver sistema de arquivos ext2/3/4, basta usar:
tune2fs -L rótulo dispositivo
para definir um rótulo.
--
Prof. Dr. Flávio M. Matsumoto
UFPR - ET - Departamento de Química
Caixa Postal 19050, 81531-990, Curitiba, PR.
Linux user #66569 (http://counter.li.org)
Em Dom, Abril 24,
Caro Cleber eu utilizo um HD Externo (da empresa) diariamente no meu
notebook com Debian Squeeze + Gnome (utilizando o automount)... nunca
tive problemas, a única coisa é que ele coloca um nome estranho no
/media
/dev/sdb1 on /media/af42445b-3daa-405f-84c4-38c868fc9296 type ext3
Em 24 de abril de 2011 22:09, Vinicius De Mario deb...@git.eti.brescreveu:
O que eu faço é dar um rótulo a cada partição dos hds, assim quando monta
vai aparecer o nome do rótulo, p.ex., backup1, backup2, etc.
Acredito que com o Gparted seja possível renomear o rótulo sem ter que
reformatar,
Ola Rafael!
Estou usando VirtualBox versão 4.0.4r70112
Maquina virtual com Linux Squeeze ( que seria meu servidor )
Primeira adaptador está como bridge na eth0.
Configurado assim:
allow-hotplug eth0
iface eth0 inet dhcp
Segundo adapatador está como rede interna.
configurado assim:
auto eth1
Cara o ping vai funcionar pois seu script (abaixo) quando você da um
stop nele ele não fecha o forwarding ... tenta fazer assim:
parar(){
echo 0 /proc/sys/net/ipv4/ip_forward
iptables -F
iptables -F -t nat
}
Veja se depois de executar o stop (parar) ele continua conseguindo
Dica em off:
Tenta dropar a conexão de todas as chains da tabela filter (pelo
menos)... daí depois você libera conforme sua necessidade.. desta forma:
# iptables -P INPUT DROP
# iptables -P OUTPUT DROP
# iptables -P FORWARD DROP
Abraço!
Em 25-04-2011 10:32, Rafael Henrique da Silva Correia
Bom Dia e Boa Páscoa Debianos!
Sou Marcos Egito, a muito faço parte desta lista, ja fui muito ajudado por
vocês, acompanho a todas as discussões.
Bom quero compartilhar com todos minha felicidade, Trabalho em um centro de
re-condicionamento de computadores e formação (Centro Marista Circuito
Galera,
Gostaria de colaborar com o grupo com esse vídeo-tutorial:
http://www.youtube.com/watch?v=PVBJsH0nC4w
Desde já muito obrigado!
Atenciosamente,
Henrique Fagundes
magnat...@yahoo.com.br
Skype: magnata-br-rj
Linux User: 475399
http://www.aprendendolinux.com/
Olá pessoal,
Instalei o Squeeze com Lxde e estou encontrando dois problemas:
1 - Mouse serial - achei o comando - inputattach --micorosoft /dev/ttyS0
mas não estou conseguindo por na configuração da sessão esse comando.
2 - o botão de desligar está desativado e não estou achando informação
de
Em 25 de abril de 2011 13:58, Marcos João dos Santos
mar...@acheperto.com.br escreveu:
Olá pessoal,
Instalei o Squeeze com Lxde e estou encontrando dois problemas:
1 - Mouse serial - achei o comando - inputattach --micorosoft /dev/ttyS0
mas não estou conseguindo por na configuração da sessão
Boa tarde,
Gostaria de umas informações, li em varios site sobre chaves RSA e
DSA, para uso com ssh, qual algoritimo de chave é mais recomendado,
mais seguro, tem sites que dizem que DSA é mais seguro, e sites que
RSA é mais seguro.
Aguardo.
Att.
--
To UNSUBSCRIBE, email to
Em Segunda-feira 25 Abril 2011, às 17:59:29, villani escreveu:
Boa tarde,
Gostaria de umas informações, li em varios site sobre chaves RSA e
DSA, para uso com ssh, qual algoritimo de chave é mais recomendado,
mais seguro, tem sites que dizem que DSA é mais seguro, e sites que
RSA é mais
Já tive problemas com o botão de desligar antes e no caso era apenas uma
questão de permissão do usuário, que não estava no grupo (não lembro o nome
de cabeça) que tem autorização para desligar o sistema.
André Nunes Batista
Blog: http://tagesuhu.wordpress.com/
PGP Public Key: 0x7b0590cb6722cf80
Caros,
Após um boot minha conexão wireless (doméstica) cai com muita frequência (1 ou
2 vezes por minuto), durante vários minutos. Após algum tempo (15 ou 30
minutos, talvez) ela finalmente se estabiliza e raramente volta a cair,
permanecendo estável por dias, até. Ela reconecta
Tenho um problema semelhante, algumas redes (com ou sem criptografia)
conectavam e outras não.
Resolvi desabilitando o gerenciamento de energia para a placa (porém a
minha é uma Broadcom) a cada boot. Talvez ajude no seu caso:
*iwconfig wlan0 power off*
Espero ter ajudado;
On 04/25/2011
merhaba arkadaşlar
güncelleme sırasında hata alıyorum. synaptic'te de konsolda da aynı
şekişde yine hata iletisi var. ancak sudo aptitude update yapınca hata
yok. sudo apt-get update ile güncelleme yapınca çıkan sonuç şöyle:
Hit http://ftp.tr.debian.org squeeze Release.gpg
Ign
malesef bu wifi işi beni zorladı
mehmetak:/home/mehmet# apt-get install firmware-iwlwifiReading package lists...
DoneBuilding dependency tree Reading state information...
Donefirmware-iwlwifi is already the newest version.0 upgraded, 0 newly
installed, 0 to remove and 4 not
On 2011-04-24 15:19:05 Stephen Powell wrote:
Don't file bugs upstream
If you file a bug in Debian, don't send a copy to the upstream software
maintainers yourself, as it is possible that the bug exists only in
Debian. If necessary, the maintainer of the package will forward the bug
Using Debian Squeeze. In my .weatherrc, I have the following stanza
[home]
City = Newark
Forecast = True
ID = KEWR
St = NJ
However, if I do
$weather home
weather: error: failed to retrieve
On Sun, Apr 24, 2011 at 7:47 PM, Kamaraju S Kusumanchi
raju.mailingli...@gmail.com wrote:
shawn wilson wrote:
sense no one has mentioned it yet - nmap -sP 192.168.1.*
Thanks for the nmap command. This lists some of the machines but not all.
For example, when I look at 192.168.1.1 in a web
On 04/19/2011 05:42 PM, Stan Hoeppner wrote:
[snip]
XFS beats EXT4 hands down in nearly every category,
Including not being able to xfs_check very large filesystems on 32 bit
machines. (Which if why I'm going back to ext4.)
--
Neither the wisest constitution nor the wisest laws will
Hi all,
I've got a preseed file, with a partitioning recipe that I think is
valid, but I'm having trouble getting past the partitioner with no
interaction. Unfortunately the documentation is a bit lacking on how the
various partman values interact.
This is the partitioning section of my
On Mon, 2011-04-25 at 18:27 +1200, Richard Hector wrote:
Hi all,
I've got a preseed file, with a partitioning recipe that I think is
valid, but I'm having trouble getting past the partitioner with no
interaction. Unfortunately the documentation is a bit lacking on how the
various partman
On 25/04/11 07:16, Kamaraju S Kusumanchi wrote:
Using Debian Squeeze. In my .weatherrc, I have the following stanza
[home]
City = Newark
Forecast = True
ID = KEWR
St = NJ
However, if I do
$weather home
weather: error: failed to retrieve
On 24 Apr 2011, shawn wilson wrote:
On Sun, Apr 24, 2011 at 5:10 PM, Anthony Campbell a...@acampbell.org.uk
wrote:
On 24 Apr 2011, Anthony Campbell wrote:
On 24 Apr 2011, Camaleón wrote:
Well, it's beginning to look as if it was a hardware problem all along.
The Windows partition
Dne, 25. 04. 2011 05:02:40 je Huang, Tao napisal(a):
Yes. Debian is installed and running on sda and I am trying to
overwrite the current installation with this disk image.
to my understanding, writing with dd on a mounted device leads to
unpredictable results, and never guarantees to work.
On 24 Apr 2011, Allan Wind wrote:
On 2011-04-24 22:18:02, Anthony Campbell wrote:
I just did a fresh installation of Debian. Everything seemed to go off
correctly but when I came to reboot I got:
Non-system disk or disk error: replace and strike any key when ready.
I reinstalled
Dne, 25. 04. 2011 01:47:01 je Kamaraju S Kusumanchi napisal(a):
Any other ideas?
thanks
Well, here's the one-liner I use (a crontab entry actually):
for ip in $(seq 1 254); do ping -c 1 192.168.1.$ip/dev/null; [ $? -eq
0 ] echo 192.168.1.$ip || : ; done
Found it on the Internet a while
Dne, 25. 04. 2011 05:46:18 je Jason Hsu napisal(a):
I've been able to get libtrash to PARTIALLY work. It only works on
non-empty files and ONLY files deleted through the GUI. Libtrash
does NOT work for files deleted through the rm command.
What do I need to do to get for libtrash to work
On Mon, Apr 25, 2011, at 11:02:40 +0800, Huang, Tao wrote:
to my understanding, writing with dd on a mounted device leads to
unpredictable results, and never guarantees to work.
I understand what you mean but it does work 100% of the time on the
versions I mentioned including Lenny, just not
On Du, 24 apr 11, 16:19:05, Stephen Powell wrote:
But that brings up another issue, which is reporting bugs upstream.
The official Debian policy is Don't report bugs upstream. I quote from
http://www.debian.org/Bugs/Reporting:
Don't file bugs upstream
If you file a bug in Debian,
On Mon, Apr 25, 2011, at 10:09:58 +0200, Klistvud wrote:
It would seem we're finally getting somewhere. This should be fairly
easy to test, namely: performing dd on an *unmounted* (not live)
system and seeing if it finally works.
Yes, I tried this yesterday. Using dd to write the image to
On Lu, 25 apr 11, 08:44:46, Dom wrote:
I just had a look at the Weather homepage:
http://fungi.yuggoth.org/weather/
and it looks like the format of the request and data has changed.
There is a partial fix on that page, and a new version of Weather is
being worked on. No idea when that
Hi,
the
# lspci
00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port
(rev 09)
00:01.1 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port
(rev 09)
00:16.0 Communication controller: Intel
Also barriers should be enabled for data safety. Barriers are enabled for ext4
by default.
By the way, detailed mount options should always be considered when comparing
file systems.
See this discussion: Large HDD/SSD Linux 2.6.38 File-System Comparison
Dne, 25. 04. 2011 10:54:52 je Mark Kane napisal(a):
On Mon, Apr 25, 2011, at 10:09:58 +0200, Klistvud wrote:
It would seem we're finally getting somewhere. This should be fairly
easy to test, namely: performing dd on an *unmounted* (not live)
system and seeing if it finally works.
Yes, I
Dne, 25. 04. 2011 11:06:45 je Jörg-Volker Peetz napisal(a):
Also barriers should be enabled for data safety. Barriers are enabled
for ext4
by default.
By the way, detailed mount options should always be considered when
comparing
file systems.
See this discussion: Large HDD/SSD Linux 2.6.38
On 2011-04-25, Hal Vaughan h...@halblog.com wrote:
--- SNIP ---
A couple points here. I checked the source code for the Dynamic Tree Demo
that is used as a JNLP demo. Now I will admit I haven't been using Java for
a couple years and have some catching up to do (I think I was using Java 5,
On Mon, Apr 25, 2011 at 4:51 PM, Richard Hector rich...@walnut.gen.nzwrote:
On Mon, 2011-04-25 at 18:27 +1200, Richard Hector wrote:
Hi all,
I've got a preseed file, with a partitioning recipe that I think is
valid, but I'm having trouble getting past the partitioner with no
Klistvud wrote:
Dne, 25. 04. 2011 05:46:18 je Jason Hsu napisal(a):
I've been able to get libtrash to PARTIALLY work. It only works on
non-empty files and ONLY files deleted through the GUI. Libtrash does
NOT work for files deleted through the rm command.
What do I need to do to get for
On Sun, 24 Apr 2011 22:02:21 +0200, Siard wrote:
Op Sun, 24 Apr 2011 Andrei Popescu wrote:
On Du, 24 apr 11, 13:18:25, Siard wrote:
I'm following this list through the newsgroup using Sylpheed.
Which newsgroup? Make sure it's using a bi-directional gateway (like
gmane does).
On Sun, 24 Apr 2011 23:10:10 +0100, Lisi wrote:
On Sunday 24 April 2011 18:34:55 Camaleón wrote:
On Sun, 24 Apr 2011 18:28:29 +0100, Lisi wrote:
On Sunday 24 April 2011 16:38:23 Camaleón wrote:
On Sun, 24 Apr 2011 08:27:33 -0800, peasthope wrote:
MS invented docx. Now when John Doe
On Sun, 24 Apr 2011 17:19:35 -0800, peasthope wrote:
From: Camaleon
Date: Sun, 24 Apr 2011 16:28:01 + (UTC)
What you are getting is a common/documented error, don't worry. To
solve it you have to edit the XML file and remove the line at the top
that links the XML with a stylesheet (XSL).
On Sun, 24 Apr 2011 21:29:55 -0400, Jim Green wrote:
I have a asus p8p67 deluxe board and it has two nics and two ports, I am
thinking of bonding them to one nic, but I only have one cable so will
only use one port. Will this do much help to the throughput/speed? If I
have two cables
On Mon, Apr 25, 2011 at 4:54 PM, Mark Kane m...@mkproductions.org wrote:
[...]
So the problem only happens when overwriting the live system in either
Etch or Squeeze. Lenny works exactly as expected so I guess I could try
upgrading the remote server from Etch to Lenny and then do it, but it
On Mon, 25 Apr 2011 05:08:11 +, i'll teach you to turn away. wrote:
Camaleón wrote: Cn On Sun, 24 Apr 2011 08:54:12
+, i'll teach you to turn away. wrote:
but the point is still being missed. will it fix gimp? i can
live without firefox buttons, but the gimp problem is
On Mon, Apr 25, 2011, at 12:04:41 +0200, Klistvud wrote:
Hmm, perhaps your live system is performing some disk writes *while*
your dd is doing its thing, thus effectively overwriting
(corrupting) some sectors already written by dd?
All of the OS versions I was trying in my test environment
Dom wrote:
On 25/04/11 07:16, Kamaraju S Kusumanchi wrote:
I just had a look at the Weather homepage:
http://fungi.yuggoth.org/weather/
and it looks like the format of the request and data has changed. There
is a partial fix on that page, and a new version of Weather is being
worked on.
On Apr 25, 2011 4:15 AM, Klistvud quotati...@aliceadsl.fr wrote:
Dne, 25. 04. 2011 01:47:01 je Kamaraju S Kusumanchi napisal(a):
Any other ideas?
thanks
Well, here's the one-liner I use (a crontab entry actually):
for ip in $(seq 1 254); do ping -c 1 192.168.1.$ip/dev/null; [ $? -eq 0 ]
On Apr 25, 2011 7:25 AM, Camaleón noela...@gmail.com wrote:
On Sun, 24 Apr 2011 21:29:55 -0400, Jim Green wrote:
I have a asus p8p67 deluxe board and it has two nics and two ports, I am
thinking of bonding them to one nic, but I only have one cable so will
only use one port. Will this do
Mark writes:
So the problem only happens when overwriting the live system in either
Etch or Squeeze. Lenny works exactly as expected...
They all work as expected: unpredictably.
I could try upgrading the remote server from Etch to Lenny and then do
it...
And get unpredictable results. What
On Sun, 24 Apr 2011, Jim Green wrote:
I have a asus p8p67 deluxe board and it has two nics and two ports, I
am thinking of bonding them to one nic, but I only have one cable so
will only use one port. Will this do much help to the
throughput/speed? If I have two cables connecting to both ports
Hi, everyone
From onetime ago, In my desktop screen,
the icons of direcotry and files in my home folder appears.
When I remove the icon in my desktop screen,
the folder of that icons is removed really.
I do not like the icons of my folder appears in default desktop screen.
How can I remove the
On Mon, 25 Apr 2011, shawn wilson wrote:
Can this even be done on a dumb switch? I remember there were quite a few
No. The switch needs to support LACP for auto-configuring bonded links.
You might even find an unmanaged switch capable of such, but it won't be a
dumb switch by any means.
Your
This discussion
http://phoronix.com/forums/showthread.php?36507-Large-HDD-SSD-Linux-2.6.38-File-System-Comparison/page6
treats also how to weigh safety against performance and the developer of ext4
(tytso) participated in the forum.
--
Best regards,
Jörg-Volker.
--
To UNSUBSCRIBE, email to
On Mon, 2011-04-25 at 22:35 +0900, J.Hwan.Kim wrote:
Hi, everyone
From onetime ago, In my desktop screen,
the icons of direcotry and files in my home folder appears.
When I remove the icon in my desktop screen,
the folder of that icons is removed really.
I do not like the icons of my
Jim Green wrote at 2011-04-23 22:53 -0500:
first is run time and the latter is compile time, but what is the
difference here, is one of the other's subset? do their parameters
overlap? which is the preferred file to change? changing .config
requires a recompile.
I suppose that if a setting
On Thursday 21 April 2011 21:15:11 Heddle Weaver wrote:
...
Yes, I've found this to be exactly the case. I've developed a strong
interest in quantum, chaos and game theory so I decided to up my math
ability. Applied to the local tech. colleges and discovered that they could
teach me
2011년 04월 25일 22:49, Steven 쓴 글:
On Mon, 2011-04-25 at 22:35 +0900, J.Hwan.Kim wrote:
Hi, everyone
From onetime ago, In my desktop screen,
the icons of direcotry and files in my home folder appears.
When I remove the icon in my desktop screen,
the folder of that icons is removed really.
I do
On Sun, 24 Apr 2011 20:33:45 +, Liam O'Toole wrote:
On 2011-04-24, Camaleón wrote:
(...)
Once the user trusts the application, the local JVM will load and
run the JAR file exactly as if it had originally resided on the local
hard drive.
Yes, but not all java applications are ready to
Camaleon Lisi,
From: Camaleon noela...@gmail.com
Date: Mon, 25 Apr 2011 11:01:58 + (UTC)
I took the above just as a sarcastic example...
Definitely a sarcastic example; to accompany my remark
about the computer being a sorcerer's apprentice for
most users. At a social event such as
Cedric,
I don't have much to offer on your problem with tripwire, but your emails
to debian-user are being caught by a spam filter that I have recently
installed that is claimed by its author to filter out 'unreadable' spam.
This may be happening to other subscribers ot debian-user. If one of
Hello Paul E Condon,
Am 2011-04-24 14:13:26, hacktest Du folgendes herunter:
## 'unreadable' mail
:0:
* 1^0
^\/Subject:.*=\?(.*big5|iso-2022-jp|ISO-2022-KR|euc-kr|gb2312|ks_c_5601-1987|windows-1251|windows-1256)\?
* 1^0
1/ Instruct tripwire to use a real e-mail sender (whether possible)
I have read the man tripwire. It's not possible to specify the sender email
address.
2/ Configure your MTA/MDA to go out with a real/routeable e-mail address.
I try to translate the email address @proxy by @mydomain.com
On Mon, 25 Apr 2011 23:16:39 +0900, J.Hwan.Kim wrote:
2011년 04월 25일 22:49, Steven 쓴 글:
Assuming gnome:
start gconf-editor (start with terminal or the menu: Applications -
System tools - Configuration editor)
go to apps - nautilus - desktop
There you can find check boxes to enable/disable
On Mon, 25 Apr 2011 16:28:09 +, Cedric DC wrote:
1/ Instruct tripwire to use a real e-mail sender (whether possible)
I have read the man tripwire. It's not possible to specify the
sender email address.
Recheck man 8 tripwire (test mode), it seems you can configure some e-
mailing
I have change a settings in my hotmail email.
I hope that's OK now.
Date: Mon, 25 Apr 2011 08:40:39 -0600
From: pecon...@mesanetworks.net
To: debian-user@lists.debian.org
Subject: Re: Tripwire can't send report by email [OT but not really]
Cedric,
Hi, all
Suppose that
$ cat /etc/apt/apt.conf
Acquire {
http::Proxy http://my.proxy.example:80/;;
[snip]
}
then I had a problem:
$ apt-get source util-linux -o Acquire::http::Proxy=''
E: Option Acquire::http::Proxy=: Configuration item specification must
have an =val.
$ apt-get -o
On 2011-04-25, Camaleón noela...@gmail.com wrote:
On Sun, 24 Apr 2011 20:33:45 +, Liam O'Toole wrote:
On 2011-04-24, Camaleón wrote:
(...)
Once the user trusts the application, the local JVM will load and
run the JAR file exactly as if it had originally resided on the local
hard
On 25 April 2011 09:32, Henrique de Moraes Holschuh h...@debian.org wrote:
On Sun, 24 Apr 2011, Jim Green wrote:
I have a asus p8p67 deluxe board and it has two nics and two ports, I
am thinking of bonding them to one nic, but I only have one cable so
will only use one port. Will this do much
1 - 100 of 136 matches
Mail list logo