Re: installer can't detect my usb adapter

On 1/3/23 08:41, Timothy M Butterworth wrote: Which installation medium are you using? I have a RealTek WiFi adapter and it requires the non-free installer for binary blobs to work.

installer can't detect my usb adapter

i have realtek 8188eus usb adapter, it works in buster but after reboot, it can't be recognized, i have to unplug and plug usb adapter to help detection. this isn't big inconvenience for me because i rarely reboot my problem is bullseye installer can't detect it even after i unplug and plug

Re: problem with loading installer (hard disk method)

Thank Brian and Max! On 12/30/22 01:42, Brian wrote: Two problems encountered. Two problems resolved in an unknown way. i suppose many users here are expert, explanation isn't necessary. hard disk installation method doesn't work, usually because user or i make mistake I doubt GRUB would

Re: problem with loading installer (hard disk method)

i have solved my 2nd problem on my own, thanks anyway! but i am not sure where i go wrong last time i have 2 suggestions: 1st, (hd0,msdos1) in installation manual is too mysterious, i suggest adding some explanation 2nd, option name msdos1 in grub is too misleading, i suggest changing it to

Re: problem with loading installer (hard disk method)

Thank Max, but i have solved my problem on my own but i have other problem, installer says possible mismatch version between iso file and kernel i have downloaded  debian-11.6.0-amd64-netinst.iso at vfat sda1 i prefer site http://ftp.sunet.se/debian/ which vmlinuz and initrd set shall i use?

problem with loading installer (hard disk method)

menuentry 'New Install' { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' linux /boot/newinstall/vmlinuz initrd /boot/newinstall/initrd.gz } above is from installation manual, i use it, grub says can't find vmlinuz i boot installer from buster, installed at sda4, i wonder if i shall change

Re: no sound after installing pulseaudio

Christoph, your "pactl list" command didn't work because i didn't reboot buster after installing pulseaudio, Thanks anyway!

Re: no sound after installing pulseaudio

Thank Jude! i try your command anyway though i have said i give up i install pulseaudio again and have to reboot to get it to work then i run your command, it solves my problem, Thanks!

Re: no sound after installing pulseaudio

Thank Christoph and Andrew! i can use stretch if i need pulseaudio my problem is so strange that i give up ps: Andrew, my experience shows that new isn't always better than old. many wifi adapter makers on Chinese market today support Windows XP for their new products

Re: no sound after installing pulseaudio

Thank Jude and Christoph! i run "pactl list": Connection failure: Connection refused pa_context_connect() failed: Connection refused but in stretch, pulseaudio works after i install it

no sound after installing pulseaudio

i am running buster and install pulseaudio to let pulseaudio take effect i have to reboot but there's no sound though pavucontrol seems ok (pavucontrol shows sound is playing properly) to get sound back, i have to remove pulseaudio and reboot Thanks!

Re: which X11 app can show wifi info

Thank David Wright! "wpa_cli status" is handy for me

Re: which X11 app can show wifi info

On 6/11/22 7:00 PM, Brian wrote: You are associating with a wireless access point. You must be using wpasupplicant. Have you tried installing wpagui? Thanks, wpagui seems to work for me.

Re: which X11 app can show wifi info

On 6/11/22 4:57 PM, Brian wrote: You may want wpagui, a graphical frontend for wpasupplicant. Use of Qt apps does not involve installing KDE. Thanks, but i use ifup/ifdown (not wpasupplicant) to manage network connection.

Re: which X11 app can show wifi info

On 6/10/22 4:12 PM, Stanislav Vlasov wrote: пт, 10 июн. 2022 г. в 05:12, lou : i want a small app that show wifi info, including connected network name (wpa-ssid) You may try gkrellm with gkrellmwireless plugin I don't use it some years, so it may be wrong answer. hopefully it doesn't

which X11 app can show wifi info

i want a small app that show wifi info, including  connected network name (wpa-ssid) hopefully it doesn't depend on qt as i don't use kde ( i use twm for buster) Thanks!

Re: which program can show X/Y position of mouse pointer

Thank Michael Lange! it's what i need, and it works fine in twm no wonder python is so popular these days PS: why isn't there some existing application that can do this job? is my need too special?

Re: which program can show X/Y position of mouse pointer

On 5/9/22 9:21 AM, Dan Ritter wrote: No, I've never used twm. fvwm, sawmill/sawfish, and xfwm can all do that. Probably most others. -dsr- Thanks! i have success with icewm, not with fvwm xeyes knows mouse movement, it's too bad it doesn't show X/Y coordinates

Re: which program can show X/Y position of mouse pointer

On 5/9/22 7:09 AM, Dan Ritter wrote: xdotool getmouselocation Thanks! are you sure that xterm can be made always-on-top in twm?

which program can show X/Y position of mouse pointer

i use twm for bullseye i want to record screen with ffmpeg, it allows me to select some region of screen i need a program that can display X/Y coordinates of mouse pointer as i move mouse

Re: how to install zoom for bullseye for i386

it seems i have solved it with 'apt --fix-broken install' Thanks anyway!

how to install zoom for bullseye for i386

i download  zoom_i386.deb from zoom.us and run dpkg -i: dpkg: dependency problems prevent configuration of zoom:  zoom depends on libgl1-mesa-glx; however:   Package libgl1-mesa-glx is not installed.  zoom depends on libegl1-mesa; however:   Package libegl1-mesa is not installed.  zoom depends

Re: why some wifi connection method is better than other

Thank tomas! i'm mistaken, gnome can't connect to weak wifi network too though cell phone can use it, but it's unstable, sometime it disconnects

Re: why some wifi connection method is better than other

Thanks! it's same hardware, bullseye is in hard disk while opensuse live image is copied to usb disk

Re: how to join 2 video files with ffmpeg or mencoder

Thank tomas! it seems i have used wrong keywords with "ffmpeg concatenate" as keywords, bing.com can return desired url duckduckgo.com seems blocked in china

Re: how to join 2 video files with ffmpeg or mencoder

Thank Pankaj Jangid and Teemu Likonen! it's more complicated than i thought from https://trac.ffmpeg.org/wiki/Concatenate ffmpeg -i input1.mp4 -c copy -bsf:v h264_mp4toannexb -f mpegts intermediate1.ts ffmpeg -i input2.mp4 -c copy -bsf:v h264_mp4toannexb -f mpegts intermediate2.ts ffmpeg -i

how to join 2 video files with ffmpeg or mencoder

i have 2 video files, they are of same format because they are both created by android's screen recorder and then resized with same ffmpeg command to reduce file size now i want to concatenate them with ffmpeg or mencoder how to specify options using either command? Thanks!

Re: why pdf viewer is missing in firefox for bullseye?

Thank Cater! actually firefox for debian 11 can view my local pdf file maybe those web sites with PDF files set MIME type incorrectly

why pdf viewer is missing in firefox for bullseye?

how to install pdf plugin? firefox for old debian distro can open pdf file

Re: why copying big file fails?

Thank Michael! i install go-mtpfs for i386 and it can copy 4G file, and i can check progress with "ls -l" strange thing about go-mtpfs is you'd better add & at end of command go-mtpfs seems faster than jmtpfs

Re: is it possible to install bullseye by copy whole disk?

Thank Andrei and David! i've tried, it doesn't work, i give up if install by copy is complicated, i won't do it that way instead, i just install as usual

is it possible to install bullseye by copy whole disk?

i've installed bullseye on usb disk can i copy it to hard disk (sda2) and make necessary change in /etc/fstab and then update grub of usb disk to boot sda2? Thanks!

Re: why i can't download debian-live-10.11.0-i386-gnome.iso?

Thank Keith and David! Sorry,  i've not been able to receive replies from both of you on time because of mail service problem

Re: why i can't download debian-live-10.11.0-i386-gnome.iso?

Thank Dan and Stefan! file system is ext3, it has no 2G limit IMO i've installed curl, it doesn't have such bug

why i can't download debian-live-10.11.0-i386-gnome.iso?

http://ftp.sunet.se/cdimage/archive/10.11.0-live/i386/iso-hybrid/ i use wget to download, length is 2G though ftp.sunet.se shows 2.6G ftp.funet.fi has same problem, live gnome image is more than 2G, i can't get it with wget

Re: where to find wifi card info in linux-doc

Thank David, you have better memory than i my memory is poor because of insomnia

Re: where to find wifi card info in linux-doc

Thank David! i want info about wifi adapters supported by kernel without using non-free firmware. i haven't been able to find such info in linux-doc yes, search for such info isn't easy, i give up many web pages have stories of linux users' success with wifi adapter but they might use

Re: where to find wifi card info in linux-doc

On 11/26/21 11:08 AM, Christian Britz wrote: Christian Britz wrote: This actually works recursively with the zgrep command from the zutils package, thank you! And still it doesn't find the file mentioned by deloptes, amazing! :-D Thanks to all that reply! WUSB-Design-overview.txt is

Re: where to find wifi card info in linux-doc

sorry, i use wrong word i mean wifi adapter, not wifi card in Chinese, it's called wireless card, though it's really USB wifi adapter

where to find wifi card info in linux-doc

i've installed linux-doc for bullseye  i browse /usr/share/doc/linux-doc, but can't find info about wifi card i want info about wifi cards supported by kernel Thanks!

Re: Debian

On 10/19/21 8:13 AM, Greg Wooledge wrote: No, that's fully believable. It's a fairly specialized knowledge set,which a Computer Science student may not possess. What's more worrying is the vagueness of the help request. You'd think such a student would provide at least a modicum of detail,

Re: Debian

On 19/10/2021 12:11, courtneyxshort wrote: I am a Computer Science Masters student and part of my degree involves me downloading Debian on my Mac. I have tried this countless times and I have been unsuccessful. I've watched Youtube videos/ read the information on your website and I am still

Re: why pae kernel has only 3G memory

On 10/16/21 10:32 AM, Stefan Monnier wrote: Any particular reason why you must use pae rather than the standard 32 bit kernel? Hmm... isn't "the standard 32 bit kernel" `linux-image-686-pae` ? At least the `linux-image-686` package seems to describe itself as for use only on those machines

Re: why pae kernel has only 3G memory

Thank Likonen and piorunz! https://support.hp.com/us-en/product/hp-t5740e-thin-client/4282707/manuals from hp's QuickSpecs: Note: Minimum of 1GB and a maximum of 4GB* (2 X 2GB) can be supported (*Up to 1 GB may not be available with 32-bit operating systems due to system resource

Re: why pae kernel has only 3G memory

On 10/15/21 4:57 AM, Andy Smith wrote: Hello, This is unlikely to fix things unless it's a known bug. Cheers, Andy Thanks! you are right, i've just tried bullseye, result is same in memtest86+, 2x2G memory are detected though 3G are tested my PC is 32bit, it can use only kernel for i386

why pae kernel has only 3G memory

i have stretch, it use 3G memory, 1G memory can't be used top: KiB Mem :  3038696 total,  2221904 free,   400628 used, 416164 buff/cache uname: Linux debian 4.9.0-13-686-pae #1 SMP Debian 4.9.228-1 (2020-07-05) i686 GNU/Linux i think pae kernel can use 4G memory do i have to upgrade to

Re: why smart phone can't show song's Title and Artist?

On 10/6/21 4:26 AM, Stanislav Vlasov wrote: Try exfalso as tags editor. Thank Stanislav Vlasov! i use exfalso and phone can show Artist and Title now.

why smart phone can't show song's Title and Artist?

i use stretch to create mp3 song, use gmp3info to add info on Title and Artist these info are in Chinese and i guess it use utf encoding then i copy song to smart phone, but phone can't show song's Title and Artist

Re: how to record sound being played using arecord

On 10/3/21 9:23 AM, Michael Lange wrote: Hi, Because the thing you wanted to do did *not* work for you? ;-) after loading them, they don't help, i can't hear anything from recording which commands exactly did you try? Did you set the capture channel to "Vol" either by some gui mixer or

Re: how to record sound being played using arecord

On 10/2/21 9:38 AM, Dan Ritter wrote: Yes, you want to read https://dt.iki.fi/record-system-output-alsa for an example. -dsr- to Dan: it's not easy to follow instruction at https://dt.iki.fi/record-system-output-alsa after running "|modprobe snd-aloop", i can hear sound being played|

Re: how to record sound being played using arecord

On 10/2/21 7:46 AM, Dan Ritter wrote: Do you have a microphone plugged in? Try arecord test.wav and make some noise, then hit ctrl-c to stop the recording. Use aplay test.wav to play it back. If you need a more sophisticated interface, consider installing audacity. -dsr- Thank Dan!

how to record sound being played using arecord

Could you give me commands that record sound being played? i don't know how to use alsaloop Can arecord use mp3 format? Thanks!   ~$ amixer Simple mixer control 'Master',0   Capabilities: pvolume pswitch pswitch-joined   Playback channels: Front Left - Front Right   Limits: Playback 0 - 65536

how to record sound being played

i have bullseye and want to record sound being played using ffmpeg https://trac.ffmpeg.org/wiki/Capture/ALSA $ arecord -l List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]   Subdevices: 1/1   Subdevice #0: subdevice #0 how to use

Re: foolish problem with installer: can't load firmware

On 9/22/21 2:32 AM, to...@tuxteam.de wrote: Of course. Lots and lots. This doesn't mean it is a good thing. Think of that American tractor company (John Deere) where you can't exchange parts yourself because the built-in software will notice and refuse to work. And changing that would be a

Re: foolish problem with installer: can't load firmware

On 9/21/21 3:49 PM, piorunz wrote: . Many Linux distributions are made that way. After all, we want to come away from closed source software. Debian tries to avoid all closed source and/or non-free software, as per The Debian Free Software Guidelines (DFSG):

Re: foolish problem with installer: can't load firmware

On 9/20/21 5:38 AM, Stanislav Vlasov wrote: 2021-09-20 14:04 GMT+05:00, lou : installer using hard disk method can read firmware in ext3 partition May you take installer with integrated firmware? https://cdimage.debian.org/images/unofficial/non-free/images-including-firmware/ Thanks

Re: foolish problem with installer: can't load firmware

Thank David, i have installed successfully by hard disk method installer using hard disk method can read firmware in ext3 partition i have 2 usb sticks, one for installer, the other for firmware, but bullseye installer can't read firmware stick last mail is sent thru mail provider's web

Re: how to remove grub's background image

On 8/26/21 4:37 AM, Brian wrote: Try: Edit /etc/default/grub to have GRUB_BACKGROUND="" Execute 'update-grub'. Thank Brian, i follow your instruction, it works, background image isn't shown Nicolas George, autoremove option doesn't work as manual promise, apt remove xfce4 apt

how to remove grub's background image

i install xfce4 in stretch, unhappy with it, and remove it but i'm unable to remove grub boot menu's background image that is installed with xfce4 i browse /boot/grub, unable to find related file i attach grub.cfg, Thanks! # # DO NOT EDIT THIS FILE # # It is automatically generated by

Re: moderators, I would appreciate if you could interfere

Andrew, i thought you r moderator because you post monthly list guideline and you speak kindly with some authority when some list user deviate

Re: how to to start X Window in debian-live-11.0.0-i386-standard.iso

On 8/14/21 11:32 PM, Greg Wooledge wrote: The "-standard" in the image name means that this is a "Standard" Debian installation, with no Desktop Environment. It probably doesn't have an X server either, or X fonts, or any of the other things you would need in order to actually run an X

Re: how to to start X Window in debian-live-11.0.0-i386-standard.iso

On 8/14/21 11:08 PM, Weaver wrote: At the prompt, type `startx'. Depending on permissions, you may need to become root. Cheers! Harry. startx don't seem to be included in ISO image and what is password for root?

how to to start X Window in debian-live-11.0.0-i386-standard.iso

i've copied debian-live-11.0.0-i386-standard.iso  to USB stick and run it X app are included, but how to start X Window?

Re: Debian 11 is released!

Thank piorunz! i'll install it today PS: www.debian.org hasn't published the news, 1st item in Project News is bad news (mourning)

Re: Intel nuc 11 i5 kit 安裝debian後，首次開機就失敗，黑化面左上角遊標一直閃

more complete translation of subject: after debian installation, first boot fails, cursor in upper-left corner blinks

Re: Intel nuc 11 i5 kit 安裝debian後，首次開機就失敗，黑化面左上角遊標一直閃

Antonio Russo, you don't understand Chinese language? i'm afraid you can't help OP might not understand English in OP's subject, he says debian installation fails, cursor in upper-left corner blinks in OP's message body, he want to you to explain message in journal: the unit

why toolbar in thunderbird can't be customized?

there are three toolbars in thunderbird the 1st can be customized to one of iconOnly/textOnly/iconWithtext but other two can't be, no matter where do i right-click beside toolbar, popup window doesn't show thunderbird for stretch and buster all have such problem

Re: need help on setting up thunderbird

tomas, thunderbird is working now

Re: need help on setting up thunderbird

Thank didier and tomas! i've set up thunderbird when i receive mail, thunderbird prompts me for password, i enter 16-char-long code, password used in their web-based mail isn't used

Re: Changement de PC : lenteur au boot

Le Fri, 3 Aug 2018 11:00:20 +0200, andre_deb...@numericable.fr a écrit : > On Friday 03 August 2018 07:29:06 Pascal Hambourg wrote: > > Le 02/08/2018 à 23:40, andre_deb...@numericable.fr a écrit : > > > J'ai copié ma Debian Stretch vers un nouveau pc. > > > Tout marche bien sauf qu'au boot

Re: Chromium ne joue plus les vidéos

Le Sat, 21 Jul 2018 15:00:22 +0200, andre_deb...@numericable.fr a écrit : > On Friday 20 July 2018 18:26:58 lou wrote: > > Je connait pas le problème, je n'utilise pas chromium, mais > > j'utilise vivaldi et il est basé sur chromium et ça marche... > > # apt-cache sear

Re: Ajouter un programme dans le menu Debian Jessie

Le Mon, 16 Jul 2018 20:53:14 +0200, G2PC a écrit : > > Le raccourci n'est pas ajouté dans le menu :'( > > >  Aille, je n'avais pas mis le fichier dans le bon dossier. > > Ajouter une entrée dans le menu XFCE de Debian 8.7 Jessie : > Ajouter une entrée dans le dossier /usr/share/applications/

Re: Chromium ne joue plus les vidéos

Le Fri, 20 Jul 2018 06:28:08 -0400, roger gm a écrit : > Bonjour > J'ai le même problème depuis quelques semaines. > Cela ne doit pas provenir nécessairement du noyau car je suis encore > sous linux 4.9.0-6-amd64 > Roger > > > - Message Transféré - > > Date: Fri, 20 Jul 2018 11:40:18

Re: monter un disque dur externe en ntfs

Le Tue, 26 Jun 2018 00:19:57 +0200 (CEST), Bernard Schoenacker a écrit : > bonjour, > > l'environnement c'est xfce4 > > merci > slt > bernard > > - Mail original - > > > De: "Belaïd" > > À: "Belaïd MOUNSI" > > Cc: "Liste Debian" > > Envoyé: Lundi 25 Juin 2018 19:05:53 > >

Re: tout arrive avec grub2

e bien ces imprudences > brouillonnes.* > * non si elle est configuré comme login (nitrokey fait ça très bien > mais on peut le faire à la main).* > > > To: debian-user-french@lists.debian.org > Subject: Re: Rien ne se passe après Grub2...oops oubliez la pièce > jointe

Re: remettre windows

Le Tue, 03 Oct 2017 22:38:07 +0200, zulian a écrit : > Le mardi 3 octobre 2017, 17:28:33 CEST Pascal Hambourg a écrit : > > Le 03/10/2017 à 17:11, hamster a écrit : > > > Quelqu'un a qui j'ai installé débian en double boot n'est pas > > > séduit par le bidule et me demande de

Re: Rien ne se passe après Grub2...oops oubliez la pièce jointe dans le dernier message...

Le Tue, 3 Oct 2017 17:16:17 +0200, Sébastien NOBILI a écrit : > Le mardi 03 octobre 2017 à 10:48, louis a écrit : > > Pensez-vous que le screenshot en PJ a à voir avec ce problème? > > Aaaah, voilà la pièce-jointe :D > > Le « -.mount » est étrange… Un problème avec le

Re: XFCE pb lancement Synaptic depuis le menu

Le Mon, 18 Sep 2017 14:07:46 +0200, "Pierre L." a écrit : > Bonjour, > > Je pense suite à upgrade Jessie 8 > Stretch 9, > dans le menu XFCE, plus moyen de lancer Synaptic. > > Celui-ci fonctionne depuis un terminal en l'appelant par son nom via > root. > > Tentative

W: Kernel Task Compendium

loaded modules and services I don't use? Thanks, Lou -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/blu0-smtp139bc71e9cbe765645ba3afd8...@phx.gbl

wheezy: findsmb output different compared to squeeze

shares instead of all 3. I'd like to know why? All machines use an identical smb.conf Regards, Lou -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/blu0

Re: Re: privoxy kinda slowish

default actions, I don't understand what's wrong with the same defaults I use in squeeze. I enabled the debug mode and checked for errors in /var/log/privoxy/logfile , but that won't point me to a possible problem. Any ideas what to look at when speed drops like that? Regards, Lou

privoxy kinda slowish

Hi list If I run privoxy with filtering disabled in the webinterface it still feels a lot slower compared to surfing without a proxy at all. Is this to be expected, and can speed improve with config adjustments? I just use the default actions on debian/squezze, and no tor. -- To

Re: Wheezy and Sun-Java

On Fri, 17 Aug 2012 06:14:58 -0300, Dr Beco wrote: I wonder, this solutions give us not only JDK or JRE, but also the plugin, don't they? The plugin's included in jre and jdk - if you don't see it in about:plugins most likely the symlink to libnpjp2.so has gone missing. The debian-way of

Re: Wheezy and Sun-Java

On Tue, 14 Aug 2012 20:29:41 -0300, Dr Beco wrote: 3) If there is an easy way of creating a .deb package from the .tgz on the original site, that would also be nice. Something like the google-earth package, I believe. There are many solutions, so please, just take a kind look into this!

Re: Re: How /etc/hosts.allow /etc/hosts.deny and smb.conf play along

Thanks for clearing this up Juan and Shawn. I noticed I could change smbd to run in inetd mode if I flip the switch in /etc/default/samba, but I don't known how this would improve things, eventually create new drawback in cifs performance ... so I'll keep it as it is with additional smb.conf

Re: Re: How /etc/hosts.allow /etc/hosts.deny and smb.conf play along

Hello Clive Thanks for pointing me to to ipcalc, I noticed smb.conf has a commented entry for 127.0.0.0/8 This would cover the whole local subnet: HostMin: 127.0.0.1 HostMax: 127.255.255.254 Does it make sense to cover more than 127.0.0.1 and 127.0.1.1 in /etc/hosts.allow ? I don't

Re: SATA disc spindown

Hello Ramon, Please check the wdc link [1] I gave you again, WD20EARS is on the list. The wiki article can't keep up all the time with newer green series coming out. [1] http://wdc.custhelp.com/app/answers/detail/a_id/5357 Regards Lou Ramon Hofer wrote: Sorry, one more question

Re: Re: SATA disc spindown

Luck! Lou -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/blu0-smtp33ba81c6d3bef2b8f7ecb2d8...@phx.gbl

Re: SATA disc spindown

Hallo Ramon, On Fri, 25 Nov 2011 11:49:42 +, Ramon Hofer wrote: Therefore I uncommented the spindown_time line and set the value to 241 which should spin down all the drives after 30 minutes. To speed up testing I have set spindown_tim = 1 but the drives still stays active... Can I check

Re: SATA disc spindown

with hdparm -S int drive , then wait while monitoring syslog :-) regards Lou -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/blu0-smtp460a4e58174d9c4ffbf2b5ad8...@phx.gbl

Re: SATA disc spindown

care to only use capital -S parameter, not -s ... otherwise it could mess up the device firmware. Regards Lou -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/blu0

Re: comment diff files

From: Jerome BENOIT g6299304p at rezozer.net Is there any way to comment a diff file ? I don't think so - you apply the diff using patch, then you put comments into the modified file, then you run a diff against the original version to get the difference with comments included. -- To

Re: debian-user-digest Digest V2011 #293

unsubscribe

Re: debian-user-digest Digest V2011 #220

unsubscribe

Quickcam Express

crash. Ci dessous le log /var/log/messages avec les info kernel (avec xawtv). Quelqu'un à essayer de compiler le pilote sans les sources packager debian ? il y a quelque mois, j'ai vu qqun soupsonner nvidia dans cette affaire, qu'en est il ? Jean-lou Oct 7 16:00:09 Pantouflebox kernel

Re[6]:

Mcmullen Ned

evolution 2.0 broken on sarge

, but crashed on startup afterwards, and then every subsequent time I attempted it. So, my question is, does anyone know how to get the wretched thing to work, or to file a more formal set of bug reports? I can only use my web-based email for so long before my eyeballs begin to bleed. -Lou (off to try

Re: [OT] Microsoft's teeny punishment by the EU

the ticket either but it usually does not do much to keep you from speeding again, just makes you more observant to avoid the police. Lou -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: [OT] Microsoft's teeny punishment by the EU

* John Hasler [EMAIL PROTECTED] [2004-03-23 23:25]: Lou writes: They may not like it, however, with over $50 billion in cash reserves paying a $600 million fine is sort of like a normal person paying a speeding ticket. A $5000 speeding ticket. Don't understand how you figure

Re: What mail program does this?

on the server y is your password x is the msg in question regards, Lou Regards, -- Sridhar M.A. GPG KeyID : F6A35935 Fingerprint: D172 22C4 7CDC D9CD 62B5 55C1 2A69 D5D8 F6A3 5935 Whatever occurs from love is always beyond good and evil

  1   2   >