Hi, can anyone please confirm me whether the following SCSI controller
by HP works fine on Debian Sarge?
Thanks.
http://snipurl.com/18tvg
It's also reported as part number 374654-B21.
--
Ciao,
Marco.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble
Gruesse!
* Gerhard Brauer [EMAIL PROTECTED] schrieb am [20.06.06 00:52]:
Gruesse!
* Florian (flobee) [EMAIL PROTECTED] schrieb am [19.06.06 23:42]:
Hallo
Ich bin bei diesem Thema so gar kein Fachmann:
Hat jemand den SCSI Controller LSI 22320-R [1] bei sich im System und
kann mir sagen
Hallo
Ich bin bei diesem Thema so gar kein Fachmann:
Hat jemand den SCSI Controller LSI 22320-R [1] bei sich im System und
kann mir sagen wie meinem Debian system den erkennen kann.
So wie es aussieht gibt es nur etwas für andere system :-(.
Habe ich da überhaupt eine Chance?
Gruß Florian
[1
Gruesse!
* Florian (flobee) [EMAIL PROTECTED] schrieb am [19.06.06 23:42]:
Hallo
Ich bin bei diesem Thema so gar kein Fachmann:
Hat jemand den SCSI Controller LSI 22320-R [1] bei sich im System und
kann mir sagen wie meinem Debian system den erkennen kann.
So wie es aussieht gibt es nur etwas
Am Samstag, 5. November 2005 02:09 schrieb Gerhard Brauer:
Kingt ziemlich mysteriös...
Danke, der Rechner ist es auch. Netzteil ist bei hochgefahrenem Rechner kalt,
heruntergefahren eignet sich das Netzteil zum Eier braten. Was es nicht alles
gibt ... Seitdem ich das SCSI-Kabel getauscht
Da hier ja einige SCSI-Spezialisten mitlesen, hoffe ich, dass mir wer einen
entscheidenden Tipp geben kann.
Ich verwende einen Dawicontrol DC-2975U (Symbios Logic 53c875) mit 1
SCSI-CDROM TEAC CD-ROM CD-532S und einem CD-Brenner TEAC CD-R58S, sowie
weiteren IDE-Geräten. Das Motherboard ist ein
Gruesse!
* Al Bogner [EMAIL PROTECTED] schrieb am [04.11.05 23:28]:
Da hier ja einige SCSI-Spezialisten mitlesen, hoffe ich, dass mir wer einen
entscheidenden Tipp geben kann.
Nu, ja... ;-)
Ich verwende einen Dawicontrol DC-2975U (Symbios Logic 53c875) mit 1
SCSI-CDROM TEAC CD-ROM CD-532S
witam
mam taki problem:
mam kontroler symbios logic i 3 dyski scsi
nie moge zainstalowac debiana :(
wywala mi ze nie znaleziono urzadzenia do partycjonowania :(
probowalem na rozne sposoby i nic :(
nie widzi dysku i juz :(
jesli moglibyscie cos podeslac w tej sprawie to bede wdzieczny
z
Dnia 30-07-2005, sob o godzinie 12:17 +0200, [EMAIL PROTECTED] napisał(a):
witam
mam taki problem:
mam kontroler symbios logic i 3 dyski scsi
nie moge zainstalowac debiana :(
wywala mi ze nie znaleziono urzadzenia do partycjonowania :(
probowalem na rozne sposoby i nic :(
nie widzi dysku i
witam
mam taki problem:
mam kontroler symbios logic i 3 dyski scsi
nie moge zainstalowac debiana :(
wywala mi ze nie znaleziono urzadzenia do partycjonowania :(
probowalem na rozne sposoby i nic :(
nie widzi dysku i juz :(
jesli moglibyscie cos podeslac w tej sprawie to bede wdzieczny
z gory thx
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Alle 16:58, venerdì 6 agosto 2004, Andraz Sraka ha scritto:
On Fri, 2004-08-06 at 16:44, Dino wrote:
We have a new IBM xSeries 335 8676-71X with 1GB RAM, two SCSI Disks 10K
RPM 36.4GB and a LSI 53C1030 Mirroring Raid controller.
We have
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I'm Dino Ciuffetti, Linux network administrator.
We have a new IBM xSeries 335 8676-71X with 1GB RAM, two SCSI Disks 10K RPM
36.4GB and a LSI 53C1030 Mirroring Raid controller.
We have problems installing Debian Woody 3 because it doesn't
re
On Fri, 2004-08-06 at 16:44, Dino wrote:
We have a new IBM xSeries 335 8676-71X with 1GB RAM, two SCSI Disks 10K RPM
36.4GB and a LSI 53C1030 Mirroring Raid controller.
We have problems installing Debian Woody 3 because it doesn't recognize the
Logical Volume. We obviously made the
On Thu, Jul 01, 2004 at 10:45:00PM -0500, Nick Lidakis wrote:
I was looking into replacing the hard disk on my debian box with a 36GB
15k Fujitsu SCSI disk. I was hoping that by doing this I would be able
to reduce boot times and increase system responsiveness. I would like to
hear about
I was looking into replacing the hard disk on my debian box with a 36GB
15k Fujitsu SCSI disk. I was hoping that by doing this I would be able
to reduce boot times and increase system responsiveness. I would like to
hear about people's experience with SCSI disk on the desktop, and hope
they
Pretty new to linux here, so bear with me.
Ok. I have to get debian on this machine with this raid controller - no
other drives in the box. It will be the first linux box for this company
and I've been the linux evangelist here... and I'm needing help.
I've pretty much given up on getting
John Hitzfelder wrote:
Ok. I have to get debian on this machine with this raid controller - no
other drives in the box. It will be the first linux box for this company
and I've been the linux evangelist here... and I'm needing help.
I've never played with RAID, so can't help at all there.
Hello,
Posted this yesterday but cant find it or any
response sorry if I missed it or the spam filter ate it.
Pretty new to linux here, so bear with me.
Trying to install on a server with intel scsi controller
srczcr. Im using woody/debian3.0r1 cd image to get started.
I try
the message without reading it.
Pretty new to linux here, so bear with me.
Just keep asking questions. Don't be put off by what appears as terse
reponses. Everyone is just busy.
Trying to install on a server with intel scsi controller srczcr. I'm using
woody/debian3.0r1 cd image to get
Problem:
I have an advansys 3940-uw (ABP940/U) scsi controller which is not
recognized by the installer.. I get no hard disks found. In expert mode on the sarge
netinst, it detected my biosless Adaptec scsi controller, but not my Advansys.
I have no floppy, and no where to get
I'm frequently on #debian in freenode as wethion, if it'd be more convenient or
preferred.
Peace,
Secher
Jon Postel, you are missed.
http://www.isi.edu/div7/people/postel.home/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jörg Volkmann schrieb:
| On Sat, 06 Dec 2003 02:50:08 +0100, Alexander Nagel
| [EMAIL PROTECTED] wrote:
|
|
|Hi,
|es ist ein Tekram 395UW mit einem Tekramchipsatz TRM-S1040. Mittlerweile
|habe ich entdeckt dass der Treiber im Kernel 2.6 mit drin ist.
On Sat, 06 Dec 2003 02:50:08 +0100, Alexander Nagel
[EMAIL PROTECTED] wrote:
Hi,
es ist ein Tekram 395UW mit einem Tekramchipsatz TRM-S1040. Mittlerweile
habe ich entdeckt dass der Treiber im Kernel 2.6 mit drin ist. Nun w=E4rs
nat=FCrlich klasse gleich den neuen Kernel aufzuspielen.
Ich denke
)
Unter Suse 8.1 und Mandrake 9.0 wird der Tekram 395U selbständig
erkannt und läuft einwandfrei.
Die neuen Treiber von Tekram.de für Debian werde ichs etzt für Debian
3.0r.1 aufsetzen.
Gruß Jörg
Nochmal kurz such...
Ah, Du bist der mit dem exotischen scsi-controller, sag das doch gleich
bzw. warum
README auf garloff.de hoert sich ja nicht gerade
prickelnd an.
Nochmal kurz such...
Ah, Du bist der mit dem exotischen scsi-controller, sag das doch gleich
bzw. warum machst Du so zusammenhangslos einen neuen thread auf?
Und wech,
Manne
--
Haeufig gestellte Fragen und Antworten (FAQ):
http
On Wednesday 03 December 2003 15:08, Alexander Nagel wrote:
ich habe einen ziemlich exotischen SCSI-Controller
Hast du's noch etwas genauer? Modell/Chipsatz?
Eventüll wirst du dir auf einem anderen Rechner eine Debian- Bootdisk stricken
müssen. Dafür brauchst du dann imho die Chipsatz- Angabe
On Wed, 03 Dec 2003 15:10:12 +0100, Alexander Nagel
[EMAIL PROTECTED] wrote:
Hi,
ich habe einen ziemlich exotischen SCSI-Controller der nicht standardm=E4=
=DFig vom=20
vanilla Kernel unterst=FCtzt wird. Deshalb wird man bei der Installation=20
aufgefordert eine entsprechende Treiberdisk
Hi,
es ist ein Tekram 395UW mit einem Tekramchipsatz TRM-S1040. Mittlerweile
habe ich entdeckt dass der Treiber im Kernel 2.6 mit drin ist. Nun wärs
natürlich klasse gleich den neuen Kernel aufzuspielen.
Ich denke auch dass das nur mit Startdisk geht.
mfg
alex
--
Haeufig gestellte Fragen und
Hi,
ich habe einen ziemlich exotischen SCSI-Controller der nicht standardmäßig vom
vanilla Kernel unterstützt wird. Deshalb wird man bei der Installation
aufgefordert eine entsprechende Treiberdisk einzulegen.
Wie muss ich nun den Sourcecode kompilieren um ihn nutzen zu können?
Bin für jeden
Tja,
jäklas lite med en gammal hemsk maskin som inte ens med det senaste BIOS'et
klarar att boota från cd. Trodde ett så enkelt kort som 1505 skulle hittas
automatiskt från de vanliga root.bin/rescue.bin floppy diskarna. Men så var
tydligen inte fallet.
Nån som har en clue?
Googlar
On Fri, 2003-08-01 at 23:08, Niclas Söderlund wrote:
jäklas lite med en gammal hemsk maskin som inte ens med det senaste BIOS'et
klarar att boota från cd. Trodde ett så enkelt kort som 1505 skulle hittas
automatiskt från de vanliga root.bin/rescue.bin floppy diskarna. Men så var
tydligen
Tja,
jäklas lite med en gammal hemsk maskin som inte ens med det senaste BIOS'et
klarar att boota från cd. Trodde ett så enkelt kort som 1505 skulle hittas
automatiskt från de vanliga root.bin/rescue.bin floppy diskarna. Men så var
tydligen inte fallet.
Nån som har en clue?
Googlar
[..]
[..]
Sodele, die installation des Intel Controlles het eigentlich ohne große
Probleme geklappt. Ich hab vorm installieren ne Diskette erstellt und dort
ins Verzeichnis /boot/ das Modul gdth.o gelegt. ( Ohne dei preload Diskette
) Diese dann beim Installieren mit angegeben.
Das hat schonmal
Hallo Leute,
ich möchte eigentlich nur ne woody Installation bei nem SCSI System
durchführen. Dabai hab ich zwei ?kleine? Probleme.
1. Der Intel Controller, ( gdt ) wird beim Installieren nicht erkannt,
somit auch kein Partitionieren möglich. Kann ich mir das Modul gth.o von
der Debian CD
Hallo Thomas,
On Mon, 09 Jun 2003 16:37:45 +0200
Thomas Lusar [EMAIL PROTECTED] wrote:
Hallo Leute,
ich möchte eigentlich nur ne woody Installation bei nem SCSI System
durchführen. Dabai hab ich zwei ?kleine? Probleme.
2. In der zu installierende Kiste is noch nen Adaptec Controller
muss ich extra nen neuen Kernel damit bauen ?
Boote den 2.4er-Kernel. Beim Booten der Install-CD einfach
bf24 eingeben. Wenn das nicht geht: wundern, dass der Treiber
fehlt.
Ich habe auf Compaq-Servern auch Intel-SCSI-Controller (mit RAID und
allem drum und dran) und die ließen sich mit dem 2.4er
[..]
Boote den 2.4er-Kernel. Beim Booten der Install-CD einfach
bf24 eingeben. Wenn das nicht geht: wundern, dass der Treiber
fehlt.
Ok, ich wundere mich =) Ne im Ernst, der SCSI Controller wird nicht
automatisch erkannt. Am Boot Promt bf24 eingegeben. Kernel is 2.4.18 und
die CD sind von
On Mon, Jun 09, 2003 at 05:54:48PM +0200, Thomas Lusar wrote:
Ok, ich wundere mich =) Ne im Ernst, der SCSI Controller wird nicht
automatisch erkannt. Am Boot Promt bf24 eingegeben. Kernel is 2.4.18 und
die CD sind von linuxland.de, Version Debian 3.0r0.
Äußerst merkwürdig. Ich würde jetzt
Moin Thomas!
Thomas Lusar schrieb am Monday, den 09. June 2003:
Boote den 2.4er-Kernel. Beim Booten der Install-CD einfach
bf24 eingeben. Wenn das nicht geht: wundern, dass der Treiber
fehlt.
Ok, ich wundere mich =) Ne im Ernst, der SCSI Controller wird nicht
Brauchst dich nicht zu
[..]
Brauchst dich nicht zu wundern. Ein bf2.4-Kernel mit _allen_
SCSI/CDROM-Treibern würde IMO nicht mal auf zwei Disketten passen.
automatisch erkannt. Am Boot Promt bf24 eingegeben. Kernel is 2.4.18 und
die CD sind von linuxland.de, Version Debian 3.0r0.
Es gibt eine Diskette mit
On 13 Jan 2003, 15:30:52, nate wrote:
Doug MacFarlane said:
So I apt-got a 2.4.19-686 kernel image, and when I rebooted, I had to use
modconf to enable the 3c59x driver, and when I rebooted, it runs like
molasses . . . during boot, it takes minutes to complete the calculate
module
-
From: Doug MacFarlane [mailto:[EMAIL PROTECTED]]
Sent: 14 January 2003 14:28
To: [EMAIL PROTECTED]; nate; Eduard Bloch
Subject: Re: Adding SCSI Controller, SCSI Tape, and SCSI Disk to
2.2.20-idepci system
On 13 Jan 2003, 15:30:52, nate wrote:
Doug MacFarlane said:
So I apt-got
: Doug MacFarlane [mailto:[EMAIL PROTECTED]]
Sent: 14 January 2003 15:30
To: Colin Ellis; [EMAIL PROTECTED]
Subject: RE: Adding SCSI Controller, SCSI Tape, and SCSI Disk to
2.2.20-idepci system
On 14 Jan 2003, 14:51:26, Colin Ellis wrote:
From looking at your dmesg output, it looks like your drive
Doug MacFarlane said:
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [557/240/63] p1 p2 p5
/dev/ide/host0/bus0/target1/lun0:hdb: set_multmode: status=0x51 {
DriveReady SeekComplete Error }
hdb: set_multmode: error=0x04 { DriveStatusError }
[PTBL] [/240/63] p1 p5 p6 p7 p8
the woody CD, so I did a floppy
install of the 2.2.20-idepci kernel. No sweat. Running fine.
But now I want to add a SCSI controller (Symbios), SCSI Tape-drive (HP), and SCSI
disk, none of which were on my old desktop. So I figure
So I apt-got a 2.4.19-686 kernel image, and when I rebooted, I had
a floppy
install of the 2.2.20-idepci kernel. No sweat. Running fine.
But now I want to add a SCSI controller (Symbios), SCSI Tape-drive (HP), and SCSI
disk, none of which were on my old desktop. So I figure
Forget it. -idepci is the worst kernel among the installation kernels.
OTOH
Doug MacFarlane said:
But now I want to add a SCSI controller (Symbios), SCSI Tape-drive (HP),
and SCSI disk, none of which were on my old desktop. So I figure
So I apt-got a 2.4.19-686 kernel image, and when I rebooted, I had to use
modconf to enable the 3c59x driver, and when I rebooted
1030 SCSI controller card, but it doesn't find it (I
got 2 36 GB HD's connected to it with RAID 0, it should see /dev/hda). I
believe that I may have to pass some arguments when booting, but can't
figure what they are...anybody knows what should I pass it to boot up
successfully?.
I know
PROTECTED]
Subject
Re: Can't boot server with a LSI Logic 1030 SCSI controller card
#include hallo.h
* Jorge Martinez [Mon, Jan 06 2003, 03:08:38PM]:
I know Linux can be installed 'cause I could install RH 8.0, so I think
Woody should also be able to boot with the right arguments.
Look
Hi:
I am attempting to install Woody (got
the CD's from Tuxcd's), but it doesn't find my controller card (I got 2
36 GB HD's). I believe that I have to pass some arguments when booting,
but can't figure what they are...anybody knows what should I pass it to
boot up successfully?.
I know Linux
(note: I am resending it because I am not sure if my first attempt
succeeded; the mail was setup for html, not text, I changed that now).
Hi:
I am attempting to install Woody (got the CD's from Tuxcd's) on a server
with an LSI Logic 1030 SCSI controller card, but it doesn't find it (I
got 2
#include hallo.h
* Jorge Martinez [Mon, Jan 06 2003, 03:08:38PM]:
I know Linux can be installed 'cause I could install RH 8.0, so I think
Woody should also be able to boot with the right arguments.
Look for the modules-preload-Floppy on the Woody-Errata site.
Gruss/Regards,
Eduard.
--
They
Hallo Thomas,
Am 02:28 2002-12-12 +0100 hat Thomas Templin geschrieben:
Alle SCSI Controller die vom Kernel untersttzt werden sollten im
Prinzipp laufen. Allerdings von Tecram und DawiControll würde ich
aus Erfahrung das nur mit Einschränkung behaupten.
Gut sind Adaptec 19160 (32Bit PCI) 29160
Sys aufzubauen. D.h. das
vorhandene Sys mit einem SCSI Controller und einer HD zu
ergänzen. Problem? Ich habe diverse Leute gefragt was so
empfehlenswert ist und von jedem eine andere Antwort
bekommen.
Darf ich neugierig sein und nach dem warum fragen?
Aber natürlich. Ich
[EMAIL PROTECTED] (Thomas Templin) writes:
Alle SCSI Controller die vom Kernel untersttzt werden sollten im
Prinzipp laufen. Allerdings von Tecram und DawiControll würde ich
aus Erfahrung das nur mit Einschränkung behaupten.
Solange da jeweils ein SymbiosLogic-Chip drauf ist, geht das
Andreas Metzler [EMAIL PROTECTED] writes:
Wenn man den richtigen Hostadapter (z.B. NCR/Symbios oder wie immer
das heute heisst) kauft, ist das so schmerzlos wie IDE.
LSI Logic, http://www.lsilogic.com/products/stor_prod/index.html
die teile sind auesserst empfehlenswert.
--
frobnicate foo
Hallo,
auch wenn es ein bischen OT ist: Ich habe vor mir zu Weihnachten ein
kleines SCSI Sys aufzubauen. D.h. das vorhandene Sys mit einem SCSI
Controller und einer HD zu ergänzen. Problem? Ich habe diverse Leute
gefragt was so empfehlenswert ist und von jedem eine andere Antwort
bekommen
On Wednesday 11 December 2002 22:25, J. Volkmann wrote:
[...]
auch wenn es ein bischen OT ist: Ich habe vor mir zu Weihnachten
ein kleines SCSI Sys aufzubauen. D.h. das vorhandene Sys mit
einem SCSI Controller und einer HD zu ergänzen. Problem? Ich
habe diverse Leute gefragt was so
J. Volkmann [EMAIL PROTECTED] wrote:
auch wenn es ein bischen OT ist: Ich habe vor mir zu Weihnachten ein
kleines SCSI Sys aufzubauen. D.h. das vorhandene Sys mit einem SCSI
Controller und einer HD zu ergänzen. Problem? Ich habe diverse Leute
gefragt was so empfehlenswert ist und von jedem
Andreas Metzler ([EMAIL PROTECTED]) schrieb:
J. Volkmann [EMAIL PROTECTED] wrote:
auch wenn es ein bischen OT ist: Ich habe vor mir zu Weihnachten ein
kleines SCSI Sys aufzubauen. D.h. das vorhandene Sys mit einem SCSI
Controller und einer HD zu ergänzen. Problem? Ich habe diverse Leute
On Thursday 12 December 2002 01:25, J. Volkmann wrote:
Andreas Metzler ([EMAIL PROTECTED]) schrieb:
J. Volkmann [EMAIL PROTECTED] wrote:
auch wenn es ein bischen OT ist: Ich habe vor mir zu
Weihnachten ein kleines SCSI Sys aufzubauen. D.h. das
vorhandene Sys mit einem SCSI Controller
ob ich so Dinger hier irgendwo
finde und was sowas kostet.
Alle SCSI Controller die vom Kernel untersttzt werden sollten im
Prinzipp laufen. Allerdings von Tecram und DawiControll würde ich
aus Erfahrung das nur mit Einschränkung behaupten.
Gut sind Adaptec 19160 (32Bit PCI) 29160 (64Bit PCI
Can anyone recommend a cheap SCSI controller? I'm putting together a
little network server for my home LAN and want to attach a SCSI DDS2
DAT drive I have for backups. It's an older DDS2 drive so I think just
about any PCI controller will be able to keep it's channel filled, and
that's the only
Carolina, Chapel Hill
[EMAIL PROTECTED] * andrew_perrin (at) unc.edu
On 12 Nov 2002, Gary Hennigan wrote:
Can anyone recommend a cheap SCSI controller? I'm putting together a
little network server for my home LAN and want to attach a SCSI DDS2
DAT drive I have for backups. It's an older DDS2
recommend a cheap SCSI controller? I'm putting together a
little network server for my home LAN and want to attach a SCSI DDS2
DAT drive I have for backups. It's an older DDS2 drive so I think just
about any PCI controller will be able to keep it's channel filled, and
that's the only device
On Sun, Oct 06, 2002 at 12:55:08PM +0200, Andraz Sraka wrote:
I'm having difficulty making teac scsi cdrom to work with aha-2940 scsi
controller under kernel 2.4.19.
Termination. In my experience, the automatic termination on the 2940
usually isn't. Make sure that the bus is terminated
re
I'm having difficulty making teac scsi cdrom to work with aha-2940 scsi
controller under kernel 2.4.19. I've tried with aic7xxx module as well
as aic7xxx_old module. With aic7xxx_old the whole thing doesn't work at
all, because the SCSI bus is being reset all the time. (see enclosed log
file
- Original Message -
From: Andraz Sraka [EMAIL PROTECTED]
To: Stephan Hachinger [EMAIL PROTECTED]
Sent: Sunday, October 06, 2002 4:23 PM
Subject: Re: aha-2940 scsi controller problem
Are you sure that the controller and drive is properly connected
and terminated and that the drive
Hello-
I am having problems with my advansys scsi controller on boot. What happens
is it goes through and looks for devices on each of the 7 scsi chains 2
times each. I don't know if it is the wrong driver that is loading or what.
I thought i could pass in a kernel command on boot.
boot
Hello-
I am having problems with my advansys scsi controller on boot. What happens
is it goes through and looks for devices on each of the 7 scsi chains 2
times each. I don't know if it is the wrong driver that is loading or what.
I thought i could pass in a kernel command on boot.
boot
this and/or know what to do about it? is it
more likely to be a kernel (software) issue, or a SCSI controller
issue (or the PCI controller!?) ? the scsi controller is a Adaptec
7890, using the AIC7xxx kernel config option.
also, eth0 was complaining (immediately after the scsi problem, and at
no other
times now, and i don't think it is going
to stop. has anyone had this and/or know what to do about it? is it
more likely to be a kernel (software) issue, or a SCSI controller
issue (or the PCI controller!?) ? the scsi controller is a Adaptec
7890, using the AIC7xxx kernel config option
Hi List
Now that I have a real fast CPU and really a lot of RAM, my
SCSI-Controller (an old Adaptec 2940-Ultra) is the speed-limit in my
box. I have three harddisks, two U-SCSI and one U2W with an adaptor, two
SCSI-CD-Roms and an SCSI-scanner. I'm thinking about either a
dual-channel controller
Ok, im pretty sure this is just a boot parm that i am not finding. Im trying
to install libranet(based on debian) on my system here. Adaptec 2940-UW, 4
scsi disks and a scsi cdrom.
Once it gets past the first boot messages and into the installation. It
always prompts me to install special modules
On Thu, 2 Aug 2001, Ron Bettle wrote:
Ok, im pretty sure this is just a boot parm that i am not finding. Im trying
to install libranet(based on debian) on my system here. Adaptec 2940-UW, 4
scsi disks and a scsi cdrom.
Once it gets past the first boot messages and into the installation. It
Hallo,
ich habe hier einen P133 der frueher ohne Probleme mit einer 3Com 509B NIC
(ISA) gelaufen ist doch seit ich eine SCSI-Platte und den Tekram DC-390
Controller (PCI) im System habe bleibt der Rechner beim starten an der
Stelle der NIC stehen. Was kann man da machen? Was koente das Problem
I am considering buying a set of Debian installation CDs to install on
my PS/2 with a 486 SLC CPU, and an integral SCSI controller on the
motherboard. The bus is MCA, of course. I have a 540 MB SCSI hard
drive, and a 4X Sony, SCSI CD-ROM.
With this equipment, is it likely that a Debian
Pre-purchase question about Debian on a PS/2 9557.
I am considering buying a set of Debian installation CDs to install on
my PS/2 with a 486 SLC CPU, and an integral SCSI controller on the
motherboard. The bus is MCA, of course. I have a 540 MB SCSI hard
drive, and a 4X Sony, SCSI CD-ROM
Peter:
Hi again,
I can get a Tekram DC310U PCI Ultra-SCSI controller (based on the
Symbios Logic SYM53C860 SCSI-3 Chip) for the same price as
the Advansys 3940UA. It uses the sym53c8xx.o driver.
Should I go for that instead?
Thanks!
--
Peter Galbraith, research scientist
I can get this controller from buy.com for CDN$79 so it's very
cheap. I intent to use it mostly for external devices (CDRW,
Zip, and an Ultra-SCSI ORB 2.2 GB removable-media drive).
Anyone have comments or better suggestions?
Thanks!
BTW, I already have an Adaptec 2940U Ultra-SCSI controller
I wrote regarding the Advansys 3940UA Ultra-SCSI controller:
I can get this controller from buy.com for CDN$79 so it's very
cheap. I intent to use it mostly for external devices (CDRW,
Zip, and an Ultra-SCSI ORB 2.2 GB removable-media drive).
Anyone have comments or better suggestions?
I
Hi again,
I can get a Tekram DC310U PCI Ultra-SCSI controller (based on the
Symbios Logic SYM53C860 SCSI-3 Chip) for the same price as
the Advansys 3940UA. It uses the sym53c8xx.o driver.
Should I go for that instead?
Thanks!
--
Peter Galbraith, research scientist [EMAIL PROTECTED
On Thu, Jul 06, 2000 at 02:15:10PM -0400, Peter S Galbraith wrote
Hi again,
I can get a Tekram DC310U PCI Ultra-SCSI controller (based on the
Symbios Logic SYM53C860 SCSI-3 Chip) for the same price as
the Advansys 3940UA. It uses the sym53c8xx.o driver.
Should I go for that instead
I've got a problem installing debian GNU/Linux 2.1.
All works well until the point where the system is checked for
peripherals.
All but the SCSI-Adapter is correctly detected. I've got an
AdvancePeripherals-Hostadapter. (2931 U2W HOME) The program tries to detect the
adapter-card (pci) but
problems with a Tecram DC390 SCSI-controller and hadn't
had any chance to install from scratch neither Debian 2.0/1 nor W95
because of the (wrong) hardware realizing.
I just picked up a cheap Adaptec AHA-1520B ISA SCSI controller. Do I stand
a chance of getting it working with my system (currently upgraded to
'frozen')? If so, which SCSI driver (kernel module, whatever) should I be
using? I haven't managed to get it to do anything so far; it'd be nice to
know
In the kernel is a driver for the aha 152x, so it should work.
In other words you stand a chance and it is possible!
Ron Rademaker
On Tue, 23 May 2000, Mark Carroll wrote:
I just picked up a cheap Adaptec AHA-1520B ISA SCSI controller. Do I stand
a chance of getting it working with my system
Hello,
I've got some problems when installing Debian GNU/Linux on a COMPAQ
Proliant 1600R (2x cpu 550MHz - 655 Mb RAM - 4x 9Gb Ultra 2 SCSI). I
want to have a RAID 5 array with a DPT PM2654U2 SCSI controller.
I need to compile a linux kernel supporting this controller. So i used
the source code
I have a machine here with an AHA-1520B/1522B SCSI card in it (or at least
that's how it identifies itself) that works fine under Win98, but refuses to
cooperate in Linux. Specifically, using kernels 2.2.9 or 2.2.12 compiled
with generic SCSI, SCSI CD-ROM, and AHA-152x support, no hosts are
/LincolnFP/BerisfordPlc)
Subject: AHA-1520B/1522B SCSI controller
I have a machine here with an AHA-1520B/1522B SCSI card in it (or at least
that's how it identifies itself) that works fine under Win98, but refuses to
cooperate in Linux. Specifically, using kernels 2.2.9 or 2.2.12 compiled
[EMAIL PROTECTED] said:
You probably need to add append=x,x,x,x to your /etc/lilo.conf file to force
detection at boot. I believe it's explained in the lilo man pages.
The syntax of append is in man lilo.conf, and then I had to look in kernel
tree/drivers/scsi/aha152x.c to find out what to
Sounds like you have to load the modules for the Zip drive and the
SCSI-CDROM. Not sure what the syntax is, though, since I don't use
SCSI.
Bryan
On 19-Oct-99 Michelle Konzack wrote:
Hello and thanks to all, which had helped me.
(7 and some doubled Mails).
Please one more time: I am on
Michelle Konzack wrote:
Hello and thanks to all, which had helped me.
(7 and some doubled Mails).
Please one more time: I am on the List and I do not like if
I get all Answers as CC two times.
It's the kind of Courtesy Copy that is no courtesy, right? ;-)
[cut]
Hello and nice afternoon.
OK, now I was able to get my 'stupid' SCSI-Controller running
but only from my Rescue-Disk. :-((
If I start with my Rescue-Disk and I use the following parameter
linux aha152x=0x340,11
it finds my Sony-CD-Rom at ID4.
But if I bot from harddisk the aha152x
On Tue, 19 Oct 1999, Michelle Konzack wrote:
: Hello and nice afternoon.
:
: OK, now I was able to get my 'stupid' SCSI-Controller running
: but only from my Rescue-Disk. :-((
:
: If I start with my Rescue-Disk and I use the following parameter
:
: linux aha152x=0x340,11
...
If I start with my Rescue-Disk and I use the following parameter
linux aha152x=0x340,11
Are you using a VLbus card with one of these built in? A something-or-other
VL300?
If so what is the ide controller chipset? (other than hopeless)
But if I boot from harddisk the aha152x is
Look at the append parameter for LILO.
Michelle Konzack wrote:
Hello and nice afternoon.
OK, now I was able to get my 'stupid' SCSI-Controller running
but only from my Rescue-Disk. :-((
If I start with my Rescue-Disk and I use the following parameter
linux aha152x=0x340,11
Hello and thanks to all, which had helped me.
(7 and some doubled Mails).
Please one more time: I am on the List and I do not like if
I get all Answers as CC two times.
The entry 'append' was not in the /etc/lilo.conf and I have added
them in a new line as
Hello,
I have tried it again to install the BASE of Debian 2.1 from Floppy.
OK, it works.
But now I must install the SCSI-Controller AH1502 (AIC 6x60).
In the BASE installation is no option to select Adaptec controller.
How can I install it ???
I have this question, because the controller
But now I must install the SCSI-Controller AH1502 (AIC 6x60).
In the BASE installation is no option to select Adaptec controller.
How can I install it ???
I searched through archives a few days ago about installing driver for adaptec
ava-1505 (ISA bus). In one post, the author said
1 - 100 of 161 matches
Mail list logo