Hoi Gijs en anderen,
Op 10-01-2024 om 10:12 schreef Gijs Hillenius:
On 10 January 2024 09:06 Paul van der Vlis, wrote:
Hoi,
Sinds kort heb ik er last van dat fail2ban erg grote logfiles heeft,
nu is hij bijvoorbeeld alweer 5,9GB. Volgens mij gaat het om SSH
aanvallen. Ik heb maar weinig
On 9 Jan 2024 14:34 -0800, from dpchr...@holgerdanske.com (David Christensen):
>> I don't know how to interpret the "Pre-fail" notation for the other
>> attributes.
>
> AIUI "Pre-fail" indicates the drive is going to fail soon and should be
> replaced.
Only if the attribute hits the "failure"
On 10 January 2024 09:06 Paul van der Vlis, wrote:
> Hoi,
>
> Sinds kort heb ik er last van dat fail2ban erg grote logfiles heeft,
> nu is hij bijvoorbeeld alweer 5,9GB. Volgens mij gaat het om SSH
> aanvallen. Ik heb maar weinig machines waar SSH openstaat voor de
> wereld, daarom kan ik niet
Hoi,
Sinds kort heb ik er last van dat fail2ban erg grote logfiles heeft, nu
is hij bijvoorbeeld alweer 5,9GB. Volgens mij gaat het om SSH aanvallen.
Ik heb maar weinig machines waar SSH openstaat voor de wereld, daarom
kan ik niet goed vergelijken. Mijn pogingen om de logs minder verbose te
Hello,
On Wed, Jan 10, 2024 at 05:06:33AM +, miphix wrote:
> If you were to issue 'ls -l /' You'll find that /bin, /sbin,
> lib{32,64,x32} are linked to their counterparts in /usr/. I under-
> stand the logic in doing so. However, for specific reasons that would
> require exhaustive
Hello,
I can help with that.
I will start contributing on Webslate as soon as possible.
Thank you,
Iliana Panagopoulou
Στις Τετ 10 Ιαν 2024 στις 2:24 μ.μ., ο/η έγραψε:
>
> Hello,
>
> I am upstream maintainer of "Back In Time" [1] [2] a GUI backup tool
> using rsync in the back.
>
> I would
Op 10-01-2024 om 11:15 schreef Paul van der Vlis:
Misschien heb ik de oplosssing. Ik heb de loglevel van "3" veranderd in
"INFO".
Het probleem is hierdoor opgelost ;-)
Groet,
Paul
--
Paul van der Vlis Linux systeembeheer Groningen
https://vandervlis.nl/
On 1/10/24 01:35, Michael Kjörling wrote:
On 9 Jan 2024 14:34 -0800, from dpchr...@holgerdanske.com (David Christensen):
I don't know how to interpret the "Pre-fail" notation for the other
attributes.
AIUI "Pre-fail" indicates the drive is going to fail soon and should be
replaced.
Only if
Hello,
I am upstream maintainer of "Back In Time" [1] [2] a GUI backup tool
using rsync in the back.
I would like to kindly ask if someone want so contribute to the Greek
translation of that application. The current state of translation is at
26%. Some strings are left for translation and
On 2024-01-10, David Christensen wrote:
>
>
> Given the OP's situation -- 8 consumer SSD's, same make and model,
> possibly from a defective manufacturing batch, all purchased at the same
> time, all deployed in the same RAID-6, all run 2.5 years 24x7, and all
> suddenly showing lots of SMART
Curt wrote:
> On 2024-01-10, David Christensen wrote:
> >
> >
> > Given the OP's situation -- 8 consumer SSD's, same make and model,
> > possibly from a defective manufacturing batch, all purchased at the same
> > time, all deployed in the same RAID-6, all run 2.5 years 24x7, and all
> >
Debian 12 on Thinkpad T450s.
The error message `Temporary failure in name resolution' appears whenever I log
into X with `startx' at prompt after boot, but it *only* occurs if the PC is
*not* connected to internet; otherwise it does not appear; nevertheless, it
annoys me and I wish to get rid of
On Wed, Jan 10, 2024 at 10:41:05AM -0800, Mike Castle wrote:
> On Wed, Jan 10, 2024 at 9:53 AM Andy Smith wrote:
> > น There was another use-case which is "sharing a read-only /usr
> > between systems by NFS, etc." but at the time this was widely
> > regarded a lost cause as so many other
The issue began after update from debian 10 to 11. And it persists in 12.
Before, Vmware Workstation help was shown in default browser (it's an
html guide).
After, guide was not showing anymore. Calling it (click on "help" on
Vmware application) began opening Abiword.
Vmware Workstation has
On Wed, Jan 10, 2024 at 07:19:41PM +, Rodolfo Medina wrote:
> Greg Wooledge writes:
> > What is the output of the "hostname" command?
>
> It's: `thinkpad'.
>
> > What is the output of "grep -F $(hostname) /etc/hosts"?
>
> It's:
>
> 127.0.1.1 caterina-thinkpad.home
On 10 Jan 2024 17:07 -, from cu...@free.fr (Curt):
> It's curious, but I just heard something on French TV from a journalist
> that's relevant to this. She said she'd covered the aeronautics field in
> the past and mentioned the *principe de dissemblance* (dissimilarity
> principle). Critical
On Wed, Jan 10, 2024 at 06:13:55PM +, Rodolfo Medina wrote:
> Debian 12 on Thinkpad T450s.
>
> The error message `Temporary failure in name resolution' appears whenever I
> log
> into X with `startx' at prompt after boot, but it *only* occurs if the PC is
> *not* connected to internet;
Greg Wooledge writes:
> On Wed, Jan 10, 2024 at 06:34:53PM +, Rodolfo Medina wrote:
>> writes:
>> > Where/how does this error message "appear"?
>>
>> As an output of the `startx' command.
>
> It would be lovely to see the *entire* error message, in case some part
> of it identifies the
Jan Ingvoldstad writes:
> Hi,
>
> It seems that Bookworm's zfs-dkms package (from contrib) has the data
> corruption bug that was fixed with OpenZFS 2.1.14 (and 2.2.2) on 2023-11-30.
>
> https://github.com/openzfs/zfs/releases/tag/zfs-2.1.14
>
> However, I see no relevant bug report in the bug
On 1/10/24, Valerio Vanni wrote:
> The issue began after update from debian 10 to 11. And it persists in 12.
>
> Before, Vmware Workstation help was shown in default browser (it's an
> html guide).
> After, guide was not showing anymore. Calling it (click on "help" on
> Vmware application) began
> On 9 Jan 2024, at 06:41, Jan Ingvoldstad wrote:
>
> Hi,
>
> It seems that Bookworm's zfs-dkms package (from contrib) has the data
> corruption bug that was fixed with OpenZFS 2.1.14 (and 2.2.2) on 2023-11-30.
>
> https://github.com/openzfs/zfs/releases/tag/zfs-2.1.14
>
> However, I see no
writes:
> On Wed, Jan 10, 2024 at 06:13:55PM +, Rodolfo Medina wrote:
>> Debian 12 on Thinkpad T450s.
>>
>> The error message `Temporary failure in name resolution' appears whenever I
>> log into X with `startx' at prompt after boot, but it *only* occurs if the
>> PC is *not* connected to
On Wed, Jan 10, 2024 at 06:34:53PM +, Rodolfo Medina wrote:
> writes:
> > Where/how does this error message "appear"?
>
> As an output of the `startx' command.
It would be lovely to see the *entire* error message, in case some part
of it identifies the program that produced the error. Many
Il 08/01/2024 04:29, Max Nikulin ha scritto:
On 07/01/2024 12:44, Max Nikulin wrote:
setpriv --reuid 1000 --regid 1000 --init-groups --reset-env -- \
env XDG_RUNTIME_DIR="/run/user/1000" \
systemd-run --user --slice=app.slice -- \
xterm
Instead of tricks with setting proper
On Wed, Jan 10, 2024 at 9:53 AM Andy Smith wrote:
> น There was another use-case which is "sharing a read-only /usr
> between systems by NFS, etc." but at the time this was widely
> regarded a lost cause as so many other things violated the
> premise.
I did that for years.
Then again,
Am 10.01.2024 um 19:19:41 Uhr schrieb Rodolfo Medina:
> > What is the output of "grep -F $(hostname) /etc/hosts"?
>
> It's:
>
> 127.0.1.1 caterina-thinkpad.home caterina-thinkpad
Add
::1 localhost localhost.localdomain ip6-localhost ip6-loopback
127.0.0.1 localhost
On Wed, Jan 10, 2024 at 10:57 AM wrote:
> Yes, the main reason for the separation of /usr has more or less
> disappeared with the arrival of initramfs, but still... why.
To some extent, it will make it easier for packaging.
Look at any package built using autoconf, for instance, you run:
Hello,
On Wed, Jan 10, 2024 at 10:41:05AM -0800, Mike Castle wrote:
> I did that for years.
>
> Then again, when I started doing that, I was using PLIP over a
> null-printer cable. But even after I could afford larger harddrives
> (so I had room to install /usr), and Ethernet cards (and later a
On 11/01/2024 03:25, Greg Wooledge wrote:
On Wed, Jan 10, 2024 at 07:19:41PM +, Rodolfo Medina wrote:
Greg Wooledge writes:
What is the output of the "hostname" command?
It's: `thinkpad'.
What is the output of "grep -F $(hostname) /etc/hosts"?
127.0.1.1
Does this method also create the modules?
-Herb
On Tue, 2024-01-09 at 13:17 +0100, Michel Verdier wrote:
> On 2024-01-08, Herb Garcia wrote:
>
> > I was able to compile Linux kernel 6.1.X.
> >
> > When I tried compiling kernel 6.5.x and ran into issues.
> >
> > I download the required
On 1/10/24 09:07, Curt wrote:
On 2024-01-10, David Christensen wrote:
Given the OP's situation -- 8 consumer SSD's, same make and model,
possibly from a defective manufacturing batch, all purchased at the same
time, all deployed in the same RAID-6, all run 2.5 years 24x7, and all
suddenly
On 1/10/24 09:30, Michael Kjörling wrote:
My understanding is that it's even relatively common, at least
for flight-critical components, to use totally different
implementations (of both hardware and software), not just sourced from
different vendors, resellers or batches, such that the same
On 10/01/2024 04:43, Valerio Vanni wrote:
Il 07/01/2024 06:44, Max Nikulin ha scritto:
setpriv --reuid 1000 --regid 1000 --init-groups --reset-env -- \
env XDG_RUNTIME_DIR="/run/user/1000" \
systemd-run --user --slice=app.slice -- \
xterm
setpriv --reuid="$kafuid"
On 10/01/2024 01:59, Valerio Vanni wrote:
Il 06/01/2024 17:38, Max Nikulin ha scritto:
I would expect something like "Stop" either from /Player or from
org.mpris.kaffeine.
I too expected something similar: stop and play (play for resume)
Have you tried "tree" and "introspect" for
On 11/01/2024 02:32, Valerio Vanni wrote:
Il 08/01/2024 04:29, Max Nikulin ha scritto:
On 07/01/2024 12:44, Max Nikulin wrote:
setpriv --reuid 1000 --regid 1000 --init-groups --reset-env -- \
env XDG_RUNTIME_DIR="/run/user/1000" \
systemd-run --user --slice=app.slice -- \
xterm
Il 10/01/2024 22:28, Cindy Sue Causey ha scritto:
On 1/10/24, Valerio Vanni wrote:
The issue began after update from debian 10 to 11. And it persists in 12.
Before, Vmware Workstation help was shown in default browser (it's an
html guide).
After, guide was not showing anymore. Calling it
On 11/01/2024 02:44, Valerio Vanni wrote:
After, guide was not showing anymore. Calling it (click on "help" on
Vmware application) began opening Abiword.
In kde control panel -> app -> default, Firefox is set as default browser.
Likely when sorted by name Abiword is before Firefox and even
On Thu, Jan 11, 2024 at 10:10:43AM +0700, Max Nikulin wrote:
> On 11/01/2024 03:25, Greg Wooledge wrote:
> > On Wed, Jan 10, 2024 at 07:19:41PM +, Rodolfo Medina wrote:
> > > Greg Wooledge writes:
> > > > What is the output of the "hostname" command?
> > >
> > > It's: `thinkpad'.
> > >
> >
> If you were to issue 'ls -l /' You'll find that /bin, /sbin,
> lib{32,64,x32} are linked to their counterparts in /usr/. I under-
> stand the logic in doing so. However, for specific reasons that would
> require exhaustive explanations that I would prefer to save us all from
> me doing, I would
On Thu 11 Jan 2024 at 10:10:43 (+0700), Max Nikulin wrote:
> There was a thread that "home" as the top level domain might not be
> really safe (somebody might register it). A reserved domain is
> "home.arpa" so e.g. to have "thinkpad", the /etc/hosts entry should be
>
> 127.0.1.1
On Wed, Jan 10, 2024 at 07:19:41PM +, Rodolfo Medina wrote:
> Greg Wooledge writes:
>
> > On Wed, Jan 10, 2024 at 06:34:53PM +, Rodolfo Medina wrote:
> >> writes:
> >> > Where/how does this error message "appear"?
> >>
> >> As an output of the `startx' command.
> >
> > It would be
On Wed, Jan 10, 2024 at 11:49:02AM -0800, Mike Castle wrote:
> On Wed, Jan 10, 2024 at 10:57 AM wrote:
> > Yes, the main reason for the separation of /usr has more or less
> > disappeared with the arrival of initramfs, but still... why.
>
> To some extent, it will make it easier for packaging.
42 matches
Mail list logo
