Fw: una-al-dia (05/12/2000) Vulnerabilidad en el cifrado de la password de KMail
Supongo q muchos lo habreis recibido para los q no aqui lo posteo. - Original Message - From: Noticias Hispasec [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, December 05, 2000 1:37 AM Subject: una-al-dia (05/12/2000) Vulnerabilidad en el cifrado de la password de KMail Hispasec - una-al-día 05/12/2000 Todos los días una noticia de seguridad www.hispasec.com Vulnerabilidad en el cifrado de la password de KMail KMail es un cliente de correo electrónico muy difundido porque forma parte del conocido entorno KDE. Desafortunadamente, tiene una grave vulnerabilidad que permite que cualquier persona con acceso de lectura al fichero de configuración pueda descifrar inmediatamente la contraseña de correo. La configuración de las cuentas se guarda en el fichero .kde/share/config/kmailrc, en el cual hay una entrada denominada passwd que guarda la contraseña para acceder al servicio POP3. Esta contraseña se guarda cifrada, pero el algoritmo de cifrado es tan simple que convierte en trivial la tarea de recuperarla. El algoritmo de cifrado puede expresarse como: E(c) = ASCII(287-ASCII(c)) Por ejemplo, E(ñ) = ASCII(287-ASCII(ñ)) = ASCII(287-241) = ASCII(46) = . y E(kde) = E(k) E(d) E(e) = = ASCII(287-ASCII(k)) ASCII(287-ASCII(d)) ASCII(287-ASCII(e)) = = ASCII(287-107) ASCII(287-100) ASCII(287-101) = = ASCII(180) ASCII(187) ASCII(186) = = ´»º Evidentemente, este hecho supone una seria amenaza para la seguridad de las contraseñas cifradas. Afortunadamente, KMail por defecto no guarda la contraseña POP3 sino que para hacerlo hay que activar la opción Store password in config file. A la vista del método de cifrado utilizado, recomendamos encarecidamente no utilizar dicha opción, a pesar de la incomodidad que ello supone. Existe, además, el problema adicional de que al borrar una cuenta toda la información de ésta, incluída la contraseña débilmente cifrada, permanece en el fichero de configuración. Opina sobre esta noticia: http://www.hispasec.com/unaaldiacom.asp?id=772 Más información: KDE http://www.kde.org/ Julio César Hernández [EMAIL PROTECTED] (c) Hispasec, 2000 www.hispasec.com/copyright.asp
Trident 9750 y XFree 3.3.6
Hola Tengo una Trident 9750 con 4Mb de memoria y no consigo configurarla bien. Sistema: Debian 2.2 Potato XFree 3.3.6 Monitor LG 55i de 15'' 800*600 85 Hz y 1024*768 60Hz configuro con xf86config para que salgan todos los modelines No consigo que funcione bien mas que a 640x480 y a 800*600 72 Hz y se ve muy mal el resto de modos hace que el monitor se desconecte Alguien tiene una respuesta a mis preguntas? Gracias por adelantado Nota: el ordenador con Linux es el de casa y escribo desde la universidad donde no son tan sensibles al movimiento GNU... Si necesitais trozos de la salida de algo los puedo enviar, pero me parecen normales y sin errores aparentes
Re: Fw: una-al-dia (05/12/2000) Vulnerabilidad en el cifrado de la password de KMail
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 El Mar 05 Dic 2000 04:03, tomkat escribió: - -- Vulnerabilidad en el cifrado de la password de KMail KMail es un cliente de correo electrónico muy difundido porque forma parte del conocido entorno KDE. Desafortunadamente, tiene una grave vulnerabilidad que permite que cualquier persona con acceso de lectura al fichero de configuración pueda descifrar inmediatamente la contraseña de correo. Yo no lo veo como una vulnerabilidad. Veamos, sólamente puede conseguir la clave quien tenga derecho de lectura al fichero ~/.kde/share. En el caso de que alguien tenga derecho a ese fichero sin que sea el usuario, la vulnerabilidad no es del kmail, si no del administrador de la máquina. Si no, el fetchmail, tb tendría una vulnerabilidad si cabe un poco más grabe, porque no se molesta ni en aplicarle un algoritmo (ni siquiera tan simple) para ocultar la lectura de ésta. - -- void practical_c(void){windows2000=++PC; linux=PC++;} Yo uso software libre (declaración a petición de Richard M. Stallman) Mario Teijeiro Otero mailto:asimovi at teleline dot es clave: correo con Asunto: [PGPKEY] Usr. Reg. 122438 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.4 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE6LOAWMKsc+XeZcdwRAgv+AJ9GsJGmRyxs+4l0nPXsXGHJ6iwZeQCfU+/e 4FAyrvmoL9Ye8yy6i8OBguY= =akWD -END PGP SIGNATURE-
Re: Fw: una-al-dia (05/12/2000) Vulnerabilidad en el cifrado de la password de KMail
Hola. Mario Teijeiro Otero wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 El Mar 05 Dic 2000 04:03, tomkat escribió: - -- Vulnerabilidad en el cifrado de la password de KMail KMail es un cliente de correo electrónico muy difundido porque forma parte del conocido entorno KDE. Desafortunadamente, tiene una grave vulnerabilidad que permite que cualquier persona con acceso de lectura al fichero de configuración pueda descifrar inmediatamente la contraseña de correo. Yo no lo veo como una vulnerabilidad. Veamos, sólamente puede conseguir la clave quien tenga derecho de lectura al fichero ~/.kde/share. En el caso de que alguien tenga derecho a ese fichero sin que sea el usuario, la vulnerabilidad no es del kmail, si no del administrador de la máquina. Si no, el fetchmail, tb tendría una vulnerabilidad si cabe un poco más grabe, porque no se molesta ni en aplicarle un algoritmo (ni siquiera tan simple) para ocultar la lectura de ésta. Pero fetchmail rechaza ficheros de configuración con permisos distintos de 600. Saludos. -- José Esteban Granada. Spain.
instalacion via red
Hola, estoy intentando instalar Potato via ftp, primero he creado unos discos con el sistema base y lo he instalado. Hasta aqui sin problemas. Ahora quiero configurar la tarjeta de red, escribir el sources.list e instalar via ftp. Los problemas: La tarjeta creo que es una DE305, que modulos tengo que cargar y que debo tocar para que funcione? He probado con varios modulos y todos me responden: init_module: Device or resource busy no he elegido bien los modulos? o falla algo mas? Arrancando con un cd de la Suse que tenia por ahi veo que me arranca el modulo tlan.o (compaq netelligent 10/100/netflex3) pero lo he probado tanto con insmod como con modprobe obteniendo el mismo resultado que antes. No se que mas probar, a ver si me podei echar una mano, si no tendré que bajarme los cd's. Gracias por adelantado. TA LUEG Quimi
Tarjeta de red
Hola de nuevo gente. Estoy aqui intentando configurar la tarjeta de red de mi pc en la universidad. Al hacer un lspci me dice que: Ethernet controller 3com 3c905 100bTx Medium devsel, irq 10. Master Capable. Latency=64 Min Gnt=3 max Lat=8 IO at 0x1000 [0x1001] Bus 0, device 15, function 0 Pero cuando hago un modconf con el driver 3c9x y despues hago ifconf no me aparece. He probado con no ponerle parametros con ponerle ( combinaciones multiples) options=4 options=12 debug=1 io=0x1000 io-0x1001 pero sigue sin aparecerme en ifconfig. ?Alguien tiene alguna idea de como puedo hacerlo? Gracias de antemano Gabriel Do You Yahoo!? Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk or your free @yahoo.ie address at http://mail.yahoo.ie
Tarjeta de red (2)
Perdon, entre las opciones se me olvido poner la interrupcion irq=10 Gracias Gabriel Do You Yahoo!? Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk or your free @yahoo.ie address at http://mail.yahoo.ie
Re: Tarjeta de red
Buenas, ?Alguien tiene alguna idea de como puedo hacerlo? Mi tarjeta de red (una NE-2000 compatible) tampoco aparecia. La configure con modconf y no me dio ningun mensaje de error al cargar el modulo. Si hacia un lsmod el modulo estaba ahi pero si hacia un ifconfig no aparecia el eth0, pero no pasa nada yo simplemente teclee ifconfig eth0 up y... Voila!! alli estaba mi tarjeta. Espero que tambien te funcione, Saludos, Pablo.
Re: Tarjeta de red
Has probado a ver si te aparece con ifconfig -a ? De esta forma te aparecen todos los interfaces aunque no esten activos Saludos El Tuesday 05 December 2000 16:34, first last escribió: Hola de nuevo gente. Estoy aqui intentando configurar la tarjeta de red de mi pc en la universidad. Al hacer un lspci me dice que: Ethernet controller 3com 3c905 100bTx Medium devsel, irq 10. Master Capable. Latency=64 Min Gnt=3 max Lat=8 IO at 0x1000 [0x1001] Bus 0, device 15, function 0 Pero cuando hago un modconf con el driver 3c9x y despues hago ifconf no me aparece. He probado con no ponerle parametros con ponerle ( combinaciones multiples) options=4 options=12 debug=1 io=0x1000 io-0x1001 pero sigue sin aparecerme en ifconfig. ?Alguien tiene alguna idea de como puedo hacerlo? Gracias de antemano Gabriel Do You Yahoo!? Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk or your free @yahoo.ie address at http://mail.yahoo.ie -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Joaquin Urrutia Gonzalez Powered by Debian Potato GNU/LiNUX [EMAIL PROTECTED] [EMAIL PROTECTED] Kernel 2.2.17
Re: Tarjeta de red
At 18:08 05/12/00 +0100, you wrote: Buenas, ?Alguien tiene alguna idea de como puedo hacerlo? Mi tarjeta de red (una NE-2000 compatible) tampoco aparecia. La configure con modconf y no me dio ningun mensaje de error al cargar el modulo. Si hacia un lsmod el modulo estaba ahi pero si hacia un ifconfig no aparecia el eth0, pero no pasa nada yo simplemente teclee ifconfig eth0 up y... Voila!! alli estaba mi tarjeta. Siempre y cuando esté en /etc/network/interfaces... = Jaume Sabater i Lleal mailto:[EMAIL PROTECTED] =
Re: Tarjeta de red
Me interesa. Tengo una igual pero deje de intentar configurarla pues consegui una NE200-PCI. Al principio intente con la vortex (ver descripcion en la Documentacion del nucleo linux) ?funciono? Nunca la probe. Puedo probar nuevamente (en la noche lo hare en casa despacio y sin ruido). Es mas, en el 2.2.17 viene el controlador? No me parece haberlo visto. On Tue, 5 Dec 2000, first last wrote: Hola de nuevo gente. Estoy aqui intentando configurar la tarjeta de red de mi pc en la universidad. Al hacer un lspci me dice que: Ethernet controller 3com 3c905 100bTx Medium devsel, irq 10. Master Capable. Latency=64 Min Gnt=3 max Lat=8 IO at 0x1000 [0x1001] Bus 0, device 15, function 0 Pero cuando hago un modconf con el driver 3c9x y despues hago ifconf no me aparece. He probado con no ponerle parametros con ponerle ( combinaciones multiples) options=4 options=12 debug=1 io=0x1000 io-0x1001 pero sigue sin aparecerme en ifconfig. ?Alguien tiene alguna idea de como puedo hacerlo?
traffic control
Hola Alguien que esté usando traffic control (tc) con el 2.4.0test11 me puede decir que opciones son las necesarias para que funcione? es que el menú de QoS hay mucho help is no available, lo he puesto todo como módulo pero tengo problemas con los modulos del directorio /shed, así que lo compilaré en el kernel pero no quiero meter todo el QoS dentro del kernel a saco (sí que lo he hecho con los módulos) Gracias Carles Pina i Estany E-Mail: [EMAIL PROTECTED] || #ICQ: 14446118 || Nick: Pinux / Pine URL: http://www.salleurl.edu/~is08139 Yo, en la mañana, abro la ventana: el mundo se tiene de ventilar
RE: Bugs en Debian
-Mensaje original- De: Javier Fdz-Sanguino Pen~a [EMAIL PROTECTED] Para: [EMAIL PROTECTED] [EMAIL PROTECTED]; Usuarios de Debian en español debian-user-spanish@lists.debian.org; Andres Seco Hernandez [EMAIL PROTECTED] Fecha: sábado 2 de diciembre de 2000 16:48 Asunto: Re: Bugs en Debian [...] Así que *sí* hay mecanimos, pero hay que andar con cuidado, no se le epuede quitar un paquete a un desarrollador que simplemente no responde a los bug reports porque está de vacaciones de verano... Pues el que se encarga del paquete xzx hace ya casi un año que no responde. Ese paquete tiene reportado un error muy importante desde hace más de 300 días. Me bajé el código fuente de woody y encontré otro fallo. Lo reporté y envié un parche que ¡corrige los dos bugs! Sigo esperando a que lo arreglen (aún no he recibido la respuesta de bug cerrado). -- Ricardo Villalba [EMAIL PROTECTED] [EMAIL PROTECTED] http://members.xoom.com/rvmsoft
generacion de Packages.gz
Hola a todos, Tengo .deb en un disco duro y necesito generar los archivos Packages para los paquetes que tengo. Alguien podria colaborarme diciendome como generar este archivo? Gracias de antemano at Julian
Re: Tarjeta de red
El martes 05 de diciembre de 2000 a la(s) 18:18:42 +0100, Jaume Sabater contaba: no aparecia el eth0, pero no pasa nada yo simplemente teclee ifconfig eth0 up y... Voila!! alli estaba mi tarjeta. Siempre y cuando esté en /etc/network/interfaces... Y si no, 'ifconfig eth0 192.168.12.34' y a funcionar. [EMAIL PROTECTED] -- David Serrano [EMAIL PROTECTED] - Linux Registered User #87069 pgpl6asp7Txey.pgp Description: PGP signature
Re: generacion de Packages.gz
Hola. Seguro que hay algo más elegante, pero a mí me funciona esto: if [ -s $1 ]; then # echo ** Sí existe: $1 dpkg-deb --field $1 nombreFi=`echo $1 | cut --delimiter=/ --fields=5,6,7,8,9,10` echo Filename: $nombreFi (ls -lL $1) | # lo mete a la entrada de este shell while read a b c d tam f g h i do echo Size: $tam; done (md5sum $1) | # idem while read md5sum b do echo MD5sum: $md5sum; done echo fi Como ves, te da en salida estándar la entrada Packages del paquete que le das como primer argumento. Saludos. Julian Armando Mena Zapata wrote: Hola a todos, Tengo .deb en un disco duro y necesito generar los archivos Packages para los paquetes que tengo. Alguien podria colaborarme diciendome como generar este archivo? Gracias de antemano at Julian -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- José Esteban Granada. Spain.
Re: generacion de Packages.gz
Julian Armando Mena Zapata wrote: Hola a todos, Tengo .deb en un disco duro y necesito generar los archivos Packages para los paquetes que tengo. Alguien podria colaborarme diciendome como generar este archivo? ... Este es el script que tengo para actualizar el Packages y el Packages de los updates de seguridad: dpkg-scanpackages dists/stable/updates/main/binary-i386 /www/public/linux/debian/indices/override.potato.gz dists/stable/updates/main/binary-i386/Packages rm dists/stable/updates/main/binary-i386/Packages.gz cat dists/stable/updates/main/binary-i386/Packages | gzip -9 dists/stable/updates/main/binary-i386/Packages.gz dpkg-scanpackages dists/stable/updates/non-free/binary-i386 /www/public/linux/debian/indices/override.potato.gz dists/stable/updates/non-free/binary-i386/Packages rm dists/stable/updates/non-free/binary-i386/Packages.gz cat dists/stable/updates/non-free/binary-i386/Packages | gzip -9 dists/stable/updates/non-free/binary-i386/Packages.gz -- Saludos, O__ Enzo.,/ ()=\() Enzo A. Dari | Instituto Balseiro / Centro Atomico Bariloche 8400-San Carlos de Bariloche, Argentina | email: [EMAIL PROTECTED] Phone: 54-2944-445208, 54-2944-445100 Fax: 54-2944-445299 Web page: http://cabmec1.cnea.gov.ar/darie/darie.htm
Instalacion En Disco Rigido Para Otra Pc
Hola lista, queria preguntarles si es posible instalar en un disco rigido y luego usar ese disco rigido en otra Pc. Resulta que tengo una pc en mi trabajo que la queremos usar como estacion de trabajo para lo cual me pidieron que le instalara la distribucion de Mandrake ya que esta se aclopa muy bien a las necesidades de usuario pero esta no tiene booteo desde cd-rom y cuando quiero instalar usando un diskette con la imagen para bootear con cd-rom se queda colgado, la unidad es totalmente standard por lo que no necesita de alguna configuracion especial, entonces pensaba si era posible instalar desde mi pc (que si tiene booteo desde cd-rom y no he tenido ningun problema), configurarle las X y luego usar ese disco rigido en la otra Pc, las maquinas son diferentes, estas son las especificaciones: Maquina 1: Booteable desde Cd-Rom Marca : Clone Procesador : Pentuim II 350 MHZ Memoria Ram : 64 MB Tarjeta De Video : S3 Maquina 2 Marca : AST Bravo LC 5100 Procesador: Pentim 100 Mhz Memoria Ram : 32 MB Tarjeta de Video : Sis 6205 Como ven las maquinas son diferentes pero ambas cumplen con las especificaciones minimas para instalar Linux, se que esta lista es de Debian pero les pregunto esto ya que yo uso Debian y el servidor que va a utilizar la maquina remota sera un Debian, espero no molestar a nadie de la lista por usar la distribucion de Mandrake pero es la distribucion que me pidieron que instale :(, gracias a todos y espero que puedan ayudarme. Una ultima pregunta, si tengo configurado correctamente las X en Debian que archivos necesito copiar para que en Mandrake no tenga que volver a configurarlas?? el XF86config.conf ?? alguno otro?? Gracias a todos. _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
No puedo instalar desde particion...
Hola a todos, como estan? yo aca con problemas que les paso a contar: Me bajé de la red el KDE, todos los archivos porque no sabia cual instalar y cual necesitaria tal aplicacion... en fin, bajé todos para no tener problemas después. Voy a preguntar brevemente porque hice muchas cosas que ni yo recuerdo ya, asi que solo les preguntaré esto: Como hago para instalar el KDE desde un directorio? porque si pongo file:/kde en sources.list, al querer usar el apt-get install nombre_paquete me da este error: Reading Package List... Error! E: Read error - Read (21 Is a directory) problem opening /var/state/apt/lists/_kde_dists_stable_main_binary-i386_Packages E: The package lists or status file can not be parsed or opened Cual es la lista de paquetes? solo baje los .deb y supuse que era suficiente con eso. Qué tengo que modificar para que me reconozca ese directorio como fuente de archivos? modifiqué el sources.list y demas, cree unos directorios tipo /var/state/apt/lists/_kde_dists_stable_main_binary-i386_Packages que me decia no existian, y despues de crearlos los encuentra pero me da el error de antes. Meti los .deb ahi y todo, pero nada sale. Cómo hago para instalarlos? Antes de que me tiren con algo, les aclaro que hace poco comencé con Linux y tengo un winmodem que no pude instalar en Linux. Por tanto, los archivos los bajé desde Windows y los pasé a Linux, razón por la cual es unicamente un directorio, la fuente de archivos que puedo utilizar para instalar el KDE. Uso Potato pero no lo tengo completo, por eso no tengo KDE. Les mando un abrazo y espero me puedan ayudar... en unos días supongo ya tendré el nuevo modem, pero mientras tanto no me queda otra que instalar asi las cosas. Hasta pronto.
Re: Instalacion de Potato
Esa es la q yo tengo... :- Cómo la configuraste???
Re: Instalacion de Potato
Esa es la mia :- Como la configuraste? Un saludo [EMAIL PROTECTED] escribió: On Mon, Dec 04, 2000 at 03:52:59AM +0100, Aurelio Diaz-Ufano wrote: ¿Conocéis algún programa con la Tarjeta gráfica S3 3D 8 Mb? Gracias ¿A qué te refieres con algún programa para esa tarjeta?. Yo tengo la S3 Trio 3D/2X 8Mb y va de maravilla con todos los programas. Saludos. Diego -- * Diego Bote BarcoEscuela de Ingenierías Industriales Área de Matemática Aplicada Avda. de Elvas s/nº Departamento de Matemáticas C.P.: 06071 BADAJOZ Universidad de Extremadura Tlf.: 924 289600 ext 9754 Fax: 924 289601 correo-e: [EMAIL PROTECTED] * -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Boot error (PCMCIA Modules)
dpkg --purge pcmcia-cs Eileen Orbell wrote: Thank you that removed most of the errors. When I ran that command I did receive the following errors though: directory not empty so it could not remove all reference.. can I delete these directories??? I still get some reference to pcmcia on boot... Thanks At 01:41 AM 12/5/2000 +0100, you wrote: On Mon, Dec 04, 2000 at 07:21:38PM -0500, Eileen Orbell wrote: I reconfig my kernel and now on boot I get about 5 -6 lines of error re PCMICIA modules. Because it boots fast I cannot read them all but I am assuming I am missing the modules. I do not have any PCMCIA hardware anyway so can I remove this? I did not see any reference to it in make xconfig?? apt-get --purge remove pcmcia-cs -- ,---. Name: Alson van der Meulen Personal: [EMAIL PROTECTED] School: [EMAIL PROTECTED] `---' We don't support that. We won't support that. - -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] Eileen Orbell Software Internet Applications Capitol College mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] Don't Fear the Penguin. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- ::: ICQ: 75132336 http://www.aphroland.org/ http://www.linuxpowered.net/ [EMAIL PROTECTED]
apt: http vs. ftp?
Dear debian-users, Just curious, is there any particular reason to favor http vs. ftp, or vice versa, in one's sources.list? tia, =wl -- Albert ``Willy'' Lee, Emacs user, game programmer They call me CRAZY - just because I DARE to DREAM of a RACE of SUPERHUMAN MONSTERS!
apt-get doesn't install everything
Hi, since I've upgraded to woody (about 3-4 weeks ago) apt-get sometimes installs only part of the package. I have this from time to time and it seems not to be related to the package. Example: Last night I installed isdnutils, and it didn't install the /etc/isdn/ parts. I converted then the deb package to tgz and yes -- the tgz CONTAINED the stuff. So it's likely not a package but a dpkg problem. I friend of mine experienced the same. apt-get install --reinstall doesn't help either. Did someone experience the same ? -- Johannes
Re: apt: http vs. ftp?
On 4 Dec 2000, Willy Lee wrote: Just curious, is there any particular reason to favor http vs. ftp, or http is faster if you are not proxied. Jason
Re: XFree 4 + Woody + DGA
On Wed, Nov 29, 2000 at 04:20:23PM -0700, Jeremy Nickurak wrote: Allright, I've been trying to take this up with matroxusers, matrox' technical support people, etc, and I still don't seem any closer to an answer. Matrox G400 32mb DH card on an up-to-date woody installation, 2.4.0-test11 kernel. The problem described below has appeared for as long as I can remember. (Relatively early in Branden's phase-2 debs) DGA display does not want to work. Whenever a program attempts to do display the video mode changes, but only a black screen is displayed. Everything else (sound, input etc) seems to go on, but there's no display whatsoever. Once the program stops using dga or terminates, display is restored. This has been observed in Wine, snes9x, and the dga test program. No errors are reported, by the server, nor on the standard output of the program in question. I've attached my XF86Config-4 file, but I get the impression this isn't going to help much, and I'll tell you why. Between XF86 3.x and 4.x, there were some major changes in DGA. Lots of things break with it (you left xmame off your list, too). But there's now a patch on the xmame list for DGA2 and Matrox (though it probably broke other things... I know Hans, the xmame maintainer is running 3.3.6 and hasn't bothered seriously looking at the DGA1 vs DGA2 differences.) The summary of the patch from Shyouzou Sugitani: | With this patch, xmame works well with DGA2.0 on my Matrox G200. | My conclusion is that we need to call XF86DGADirectVideo() before | XF86VidModeSwitchToMode(). | | From README.DGA(version 2.0): | XDGAOpenFramebuffer() should be called prior to initializing | a dga mode if direct framebuffer access is desired for that mode. I _can_ get DGA working if I switch to Matrox's now-over-2-month-old driver. The only problem with this solution is that it's designed for DRM1, so using it will kill off my currently working (and very well i should add) GL. I also haven't been able to extract from matrox any information on when they plan to release updated drivers. It's not a Matrox issue per se. It's the changes in DGA. I'm not sure of any other information to add, but if there's something you need, ask and you shall recieve. I also cannot confirm whether or not these symptons exhibit themselves in the current XFree4 CVS. (I'm on a 28.8 modem, and my access to the local T1 is sporadic). Any comment with respect to that, or anything else, would be greatly appreciated. Yes, you'll have similar problems with any application that calls XF86VidModeSwitchToMode -before- XDGAOpenFramebuffer. -- CueCat decoder .signature by Larry Wall: #!/usr/bin/perl -n printf Serial: %s Type: %s Code: %s\n, map { tr/a-zA-Z0-9+-/ -_/; $_ = unpack 'u', chr(32 + length()*3/4) . $_; s/\0+$//; $_ ^= C x length; } /\.([^.]+)/g;
Re: Boot error (PCMCIA Modules)
Try # dmesg to read boot messages at your leisure. The remaining pcmcia messages probably come from scripts in etc/rc*.d/ directories. Try # ls -l /etc/rc*.d/ | grep pcmcia to see which such scripts are softlinked there. I should be 'OK' to remove those links as well as the corresponding script in /etc/init.d
Re: xinetd vs. inetd
try tcpserver is suppose to be very secure replacement for inetd, it was written by the same guy who wrote qmail - secure replacement for sendmail. On Mon, Dec 04, 2000 at 09:05:17PM -0800, Nate Amsden wrote: S.Salman Ahmed wrote: Finally, the sole reply to my posting. Thanks for the info. One of these days when I reinstall Debian on my FW system, I will use xinetd instead of inetd. curious what do you need (x)inetd for on a firewall? perhaps the only daemon running on such a system is ssh..which by default runs outside of inetd/xinetd. although xinetd is better, if it were my firewall i wouldnt have either. nate -- ::: ICQ: 75132336 http://www.aphroland.org/ http://www.linuxpowered.net/ [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- ^X^C q quit :q ^C end x exit ZZ ^D ? help shit .
Re: xinetd vs. inetd
On Tue, Dec 05, 2000 at 01:33:21AM -0500, [EMAIL PROTECTED] wrote: try tcpserver is suppose to be very secure replacement for inetd, it was written by the same guy who wrote qmail - secure replacement for sendmail. Sadly, that means it is non-free since djb doesn't believe in free software. :-( sam th [EMAIL PROTECTED] http://www.abisource.com/~sam/ GnuPG Key: http://www.abisource.com/~sam/key pgpqFQY1RBkq5.pgp Description: PGP signature
spidermonkey.helixcode.com down?
Dear debian-users, I decided to take the plunge and add the HelixCode site to sources.list, and 'apt-get install task-helix-gnome task-helix-gnome-dev' -- I figured I might as well get up to date with Gnome and see how it is these days. I get some errors from apt-get of this nature (for about 5 packages): Err http://spidermonkey.helixcode.com unstable/main sawfish-gnome 0.33.1-helix2 404 Not Found Failed to fetch http://spidermonkey.helixcode.com/distributions/debian/dists/woody/main/binary-i386/sawfish-gnome_0.33.1-helix2_i386.deb 404 Not Found Unable to correct missing packages. E: Aborting Install. I tried again, a couple times. Then I tried apt-get update just to make sure things were square, and the connection is timed out. Now I can't even ping spidermonkey. Am I just unlucky in my timing, or what? Anyone else seeing this? =wl -- Albert ``Willy'' Lee, Emacs user, game programmer They call me CRAZY - just because I DARE to DREAM of a RACE of SUPERHUMAN MONSTERS!
Re: samba 2.0.7 vs. 2.0.5
On Mon, 04 Dec 2000 16:55:26 CST, Phil Brutsche writes: A long time ago, in a galaxy far, far way, someone said... I thought I saw some sort of posting here or elsewhere that mentioned that 2.0.7 works with kernels 2.2.x but not 2.0.x (mine) ? If you're trying to use the distributed samba 2.0.7 on a 2.0.x kernel it won't work - you'll need to recompile samba or upgrade the kernel to 2.2.x. Shouldn´t samba 2.0.7 depend on a kernel = 2.2 then? This seems like a bug to me (I ran into the same problem but have put samba on hold since then). rw -- / Ing. Robert Waldner | Network Engineer | T: +43 1 89933 F: x533 \ \ [EMAIL PROTECTED] |KPNQwest/AT | Diefenbachg. 35, A-1150 /
Re: spidermonkey.helixcode.com down?
Yes, the site was down for a bit earlier today. It's back up now as of 1:40 a.m CST. Cheng Dear debian-users, I decided to take the plunge and add the HelixCode site to sources.list, and 'apt-get install task-helix-gnome task-helix-gnome-dev' -- I figured I might as well get up to date with Gnome and see how it is these days. I get some errors from apt-get of this nature (for about 5 packages): Err http://spidermonkey.helixcode.com unstable/main sawfish-gnome 0.33.1-helix2 404 Not Found Failed to fetch http://spidermonkey.helixcode.com/distributions/debian/dists/woody/main/binary-i386/sawfish-gnome_0.33.1-helix2_i386.deb 404 Not Found Unable to correct missing packages. E: Aborting Install. I tried again, a couple times. Then I tried apt-get update just to make sure things were square, and the connection is timed out. Now I can't even ping spidermonkey. Am I just unlucky in my timing, or what? Anyone else seeing this? =wl
Re: 3Com network card
On Tue, Dec 05, 2000 at 12:12:32AM -, Robert Feri wrote: Now I want to know, how to install my network card (3Com Etherlink III 10Mbit ISA). Under win98 I have 3c509b drivers. It is very well described in the Ethernet-HOWTO. Basically you load the module for your card, add the correct parameters in /etc/network/interfaces (see #man interfaces) and bring the card up with ifup. I've heard somwhere that you must firstly disable pp mode under DOS and then try to install it under linux. No, not in DOS. The setting you are talking about is in the BIOS. Phil
Re: Upgrade to Woody
on Mon, Dec 04, 2000 at 08:26:22AM -1000, Amal Phadke ([EMAIL PROTECTED]) wrote: Hi All, I am running Potato on a Pentium II box and I would like to upgrade to Woody. I modified /etc/apt/sources.list file correctly to point to unstable distribution. After updating the database, I ran apt-get -s dist-upgrade to see what packages will be upgraded. But when I issue that command, I see [shellutils on hurd] in the Inst list, eg Inst cron [shellutils on hurd] Inst man-db [shellutils on hurd] Inst groff [shellutils on hurd] Inst info [shellutils on hurd] ... I believe these messages are indicating that the specified package is part of the shellutils package on hurd, which would be meaningful if you were running hurd. -- Karsten M. Self kmself@ix.netcom.com http://www.netcom.com/~kmself Evangelist, Zelerate, Inc. http://www.zelerate.org What part of Gestalt don't you understand? There is no K5 cabal http://gestalt-system.sourceforge.net/http://www.kuro5hin.org pgpHSzHqk8qBC.pgp Description: PGP signature
Re: xf86cfg does signal 11 crash
Raphael Deimel [EMAIL PROTECTED] wrote: I'm currently working on a problem with Xfree 4.0.1 and it's xf86cfg. Everytime the Server aborts with Signal 11, I tried different server and even while running it crashes Does anyone has similar problems with it ? The bug tracking system is your friend. :) http://bugs.debian.org/76251 http://bugs.debian.org/76411 http://bugs.debian.org/76484 -- Colin Watson [EMAIL PROTECTED]
Re: updated mount packages for Potato
On Mon, Dec 04, 2000 at 02:22:06PM -0600, Fred Gray wrote: Hi, The recent Debian 2.2r2 release shipped with the 2.2.18pre21 kernel, which includes significant changes to the Network File System (NFS) code. Unfortunately, it did not come with a version of mount that is needed to support these changes. shouldn't the userspace nfs utilities also be upgraded to 2.0? that seems reccommended on nfs.sourceforge.net. (nfs-common, nfs-kernel-server) though the nfs-common from potato seems to work ok, i have not yet tried it against a 2.2.18/NFSv3 server. just a pedantic note, the mount in potato does work, but not with nfs v3 (i presume) and it complains about being old. -- Ethan Benson http://www.alaska.net/~erbenson/ pgpwynixeoFvd.pgp Description: PGP signature
Re: Monolithic kernels and init scripts
On Tue, Dec 05, 2000 at 01:00:16AM +0100, scr wrote: Thank you very much for your suggestions and the patch against /etc/init.d/kerneld you supplied. Well, for your patch: this doesn´t apply cleanly to my (plain potato) kerneld script, but I got the idea. ;-) odd that it didn't apply cleanly, i made it against a potato kerneld script... (maybe your not following security updates, modutils was upgraded about 5 times to fix the same bug recently...) (or maybe it was because you needed -p2 the [lazy] way i made the patch) The source of my troubles with the modutils script might be the fact that I tried to boot my hand-rolled kernel from another directory than /boot (the other script I complained about, /etc/init.d/modutils, seems to get fooled because /boot is present, but I´m not booting from there). i don't see why that should matter really, i know people to just drop the kernel in / and things work properly. you do need to put the System.map-`uname -r` in /boot or else some things may complain. Not in the current state of my research/newbieness/whatever. ok, ill check woody's modutils and see if this bug is still there and if so file a bug against it. -- Ethan Benson http://www.alaska.net/~erbenson/ pgpQpptYj79oI.pgp Description: PGP signature
OT: Perl or PHP
hi. sorry for the off-topic post. i'm embarking on a journey to be a web developer and would like to know if i should use mod.perl or mod.php for cgi? i've searched and read alot of faqs and so far they're all just howtos. the only conclusion i can come up with is with php u can use it directly with html (plus also call it from html code) whereas with perl the only way u can use it is to call it from your html code. am i right with that assumption?
Re: OT: Perl or PHP
On Tue, Dec 05, 2000 at 01:27:02PM +0400, [EMAIL PROTECTED] wrote: hi. sorry for the off-topic post. i'm embarking on a journey to be a web developer and would like to know if i should use mod.perl or mod.php for cgi? Uh, this depends on what you wan't to do. One basic thing: cgi stands foc common gateway interface. Through this interface you can start all binarys or other programm code wich is supported by the operating system. php has nothing to do with cgi. It's a special apache mod. i've searched and read alot of faqs and so far they're all just howtos. the only conclusion i can come up with is with php u can use it directly with html (plus also call it from html code) whereas with perl the only way u can use it is to call it from your html code. Don't know if you got it exectly. The main difference it between cgi's and php. A cgi (could be Perl, C or whatever) prints the html code, in a php doc you normaly put the results within the php code. Start a little bit reading in the manual and you'll get it. For work with databeses php is one of the best thinks in the web! Cu, Sven
XFree86 4.0.1 packages and Potato
Hiya I'm wondering how things are standing with XFree86 4.0.1 packages for Debian 2.2 (Potato). I've noticed that they are already available for Woody, but not for Potato. I've tried to compile the woody source package, but I keep recompiling libs to get it the libs compiled I need to get X compiled, so if I would continu I would probably end up having a Woody system. Is there any solution to this, apart from switching to Woody? Thanks a lot in advance, Erik Noort PS I need XF86 4.0.1 to get my Matrox G450 working.
RE: [UNIX help]
It seems easier to find Universities to study in in America! However, I am willing to try anything. I am gathering as much information/books as possible and will hopfully be getting a cheap computer soon to play on at home! I would like to thank everyone for helping me and pointing me in the right direction. Thanks All Alex -Original Message- From: Tino Ionescu [mailto:[EMAIL PROTECTED] Sent: 02 December 2000 19:04 To: [EMAIL PROTECTED]; debian-user@lists.debian.org Subject: Re: [UNIX help] Did you try what is available free? Download courses from internet these are 2 places where u can start : http://www.linuxtraining.co.uk/ http://www.oase-shareware.org/shell/links/index.html. Also, many universities have very good specific application Florentin Alex Horsnell [EMAIL PROTECTED] wrote: Hi I have just started learning UNIX and unfortunatley my 'teacher' has been very busy lately and unable to show me anything. I have started on our company printers and am using putty, I don't have any problems in that area, but I would like to learn more. Does anyone out there have any prefered methods/books on learning UNIX? Thanks Alex .. . If you have received this message in error, please contact the sender immediately by return e-mail or ring 020 7498 9898 and ask for the sender. Killby Gayford Group have taken every reasonable precaution to ensure that any attachment to this e-mail has been checked for viruses. However, we cannot accept liability for any damage sustained as a result of software viruses and would advise that you carry out your own virus checks before opening any attachment. .. . -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] Get your own FREE, personal Netscape WebMail account today at http://home.netscape.com/webmail -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: What should a Debian-security metapackage should provide?
J C Lawrence [EMAIL PROTECTED] writes: etheral? That's an X program - I would _never_ install X on a server. :) Which does not mean that you can't install the X libraries and run ethereal from a remote X server. Yes, X clients on servers are bad. X client libraries are not so bad. Could you be a little more precise on that? I wouldn't install an X-server on my machine either, but why are X-clients evil? Bye, Fx -- Who do you think you are today?
Unidentified subject!
unsubscribe Original Message On 12/4/00, 10:24:45 PM, [EMAIL PROTECTED] wrote regarding debian-user-digest Digest V100 #738: Content-Type: text/plain debian-user-digest Digest Volume 100 : Issue 738 Today's Topics: Re: coping with a high-volume mailin [ Chad '^chewie' Walstrom [EMAIL PROTECTED] ] Re: konquerer won't run ... [ Bruce Sass [EMAIL PROTECTED] ] Re: Does unsubscribing from this lis [ Ringo De Smet [EMAIL PROTECTED] ] Harddisk controller _almost_ solved! [ Mathias Gehrung [EMAIL PROTECTED] ] Re: exim+fetchmail[ Timmy Douglas [EMAIL PROTECTED] ] yada and perl-5.6 [ Jeronimo Pellegrini [EMAIL PROTECTED] ] Re: Xmas shopping (will this bit of [ David Z. Maze [EMAIL PROTECTED] ] Re: Hi all[ Robert Guthrie [EMAIL PROTECTED] ] Re: debian-user-digest Digest V100 # [ [EMAIL PROTECTED] ] Re: Realplayer.deb for Netscape? [ Hubert Chan [EMAIL PROTECTED] ] Re: coping with a high-volume mailin [ Chad '^chewie' Walstrom [EMAIL PROTECTED] ] Re: Gnome [ Hubert Chan [EMAIL PROTECTED] ] anacron wrote me [ Andre Berger [EMAIL PROTECTED] ] Re: Mount ftp fs [ Chris Gray [EMAIL PROTECTED] ] MSaccess to mysql in Linux[ Fraser McAninch [EMAIL PROTECTED] ] Re: How to purge and reinstall XFree [ David Z. Maze [EMAIL PROTECTED] ] Re: slaying the inodosaur [ William T Wilson [EMAIL PROTECTED] ] Re: Laptops for Debian GNU/Linux? [ Chris Black [EMAIL PROTECTED] ] Package pool information? [ Paul D. Smith [EMAIL PROTECTED] ] Re: SCSI [ john gennard [EMAIL PROTECTED] ] Re: SCSI [ john gennard [EMAIL PROTECTED] ]
Betr.: (no subject)
Yes. If you prefer to use System Commander - which I do because I have several Windows configurations and a debian on my PC and the different users (kids, wife and I) have each there password for their own os - then: during install of debian choose lilo to put the boot stuff NOT in the masterbootrecord; you should install it in root partition of debian. Btw systemcommander should be installed on FAT16 (systemcommander 2000 can also be installed on FAT32) If you are not stuck on System Commander - no need for more than one password - you can also use linux' lilo and put an extra stanza in it for your windows. Regards [EMAIL PROTECTED] 3-12-2000 19:14:39 is it possible to double boot windows and debian on a PIII pc, perhaps using system commander? sm
Why to prefer Apache mod_ssl over Apache-SSL?
Hi there, someone recently told me that the apache-ssl is obsolete, and that you should use apache plus mod-ssl instead. Is this true, and why is this so? Thanks, Ralf -- Sign the EU petition against SPAM: L I N U X .~. http://www.politik-digital.de/spam/The Choice /V\ of a GNU /( )\ Generation ^^-^^
[OT] debianHELP is down??
No response from $ ping www.debianHELP.org. Anyone knows what happens to this good website? Jonathan Chang
HP Colorado 8GB IDE tapestreamer
Hi, I've problems getting the HP Colorado 8GB IDE tapestreamer to work. Using ide-tape, i get I/O errors after +/- 5000 blocks writing, reading gives a I/O error too, it doesnt' read any blocks. mt status doesn't work either. I use the /dev/(n)ht0 devices. Ide-scsi seems to work ok, mt status appears to work, but writing results in a read-only filesystem error... reads are resulting in an I/O error too in ide-scsi mode It's primary slave on an old (486) IDE controller, together with an IDE HD. Some dmesg entries: scsi0 : SCSI host adapter emulation for IDE ATAPI devices scsi : 1 host. Vendor: HPModel: COLORADO 8GB Rev: 2.08 Type: Sequential-Access ANSI SCSI revision: 02 st: bufsize 32768, wrt 30720, max buffers 5, s/g segs 16. Detected scsi tape st0 at scsi0, channel 0, id 0, lun 0 st0: Error with sense data: Info fld=0x40, Current st09:00: sense key Medium Error st: Unloaded. scsi : 0 hosts. ide-tape: hdb: overriding capabilities-speed (assuming 650KB/sec) ide-tape: hdb: overriding capabilities-max_speed (assuming 650KB/sec) ide-tape: hdb - ht0, 650KBps, 16*32kB buffer, 3200kB pipeline, 250ms tDSC ide-tape: ht0: I/O error, pc = a, key = 7, asc = 27, ascq = 0 ide-tape: Couldn't write a filemark -- ,---. Name: Alson van der Meulen Personal: [EMAIL PROTECTED] School: [EMAIL PROTECTED] `---' Terminated??! -
Re: DLINK NIC modules via-rhine.c
The Card is a DLINK 530TX (not the TX+) but the problem is that it has the newer via chipset (3065) so i need the updated via-rhine module.. Martin Würtele wrote: On Tue, Dec 05, 2000 at 11:42:26AM +1100, Stephen Lavelle wrote: Hello, I have just installed a DLINK 530TX Nic in a debian 2.2 box. This card uses the via-rhine module However when I do #insmod via-rhine I get: using /lib/modules/2.2.17/net/via-rhine.o /lib/modules/2.2.17/net/via-rhine.o: init_module: Device or resource busy Hint: this error can be caused by incorrect module parameters, including invalid IRQ... The output of #lspci for this device is: 00:10.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3065 (rev 4) I have looked at the drivers page at http://www.scyld.com and for this device I need the via-rhine module 1.07. Debian 2.2 only has version 1.01. scyld.com has a via-rhine.c file which is a correct version, but I cannot get this to compile. Is there a debianised version of vi-rhine.o? Am i barking up the wrong tree completely is use it with kernel 2.4.0-test9 and it works fine. hth martin -- mailto:[EMAIL PROTECTED]
Re: [OT] debianHELP is down??
On Tue, Dec 05, 2000 at 06:25:35PM +0800, Jonathan Chang wrote: No response from $ ping www.debianHELP.org. Anyone knows what happens to this good website? It appears to be (a bit) up to me, though they seem to have some diffuculties. Ping doesn't work for all sites. Some sites block icmp (like microsoft.com for example :) debianhelp.org appears to reply to icmp replies bnow btw. -- ,---. Name: Alson van der Meulen Personal: [EMAIL PROTECTED] School: [EMAIL PROTECTED] `---' What do you mean that wasn't a copy? -
apache segfaults
i'm using woody with with 2.4-test10 kernel. as i did apt-get update apt-get dist-upgrade yesterday. My apache is not running anymore. it goes segfaulting. But the other comp with the same settings does not segfault. know any idea how to fix this? # strace -f apache execve(/usr/sbin/apache, [apache], [/* 20 vars */]) = 0 uname({sys=Linux, node=livia.netfoo.org, ...}) = 0 brk(0) = 0x8098bd8 open(/etc/ld.so.preload, O_RDONLY)= -1 ENOENT (No such file or directory) open(/etc/ld.so.cache, O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=7169, ...}) = 0 old_mmap(NULL, 7169, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40017000 close(3)= 0 open(/lib/libm.so.6, O_RDONLY)= 3 read(3, \177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240I\0..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0644, st_size=117224, ...}) = 0 old_mmap(NULL, 118520, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40019000 mprotect(0x40035000, 3832, PROT_NONE) = 0 old_mmap(0x40035000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x1b000) = 0x40035000 close(3)= 0 open(/lib/libcrypt.so.1, O_RDONLY)= 3 read(3, \177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0P\20\0\000..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0644, st_size=20788, ...}) = 0 old_mmap(NULL, 183580, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40036000 mprotect(0x4003b000, 163100, PROT_NONE) = 0 old_mmap(0x4003b000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x4000) = 0x4003b000 old_mmap(0x4003c000, 159004, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x4003c000 close(3)= 0 open(/lib/libdb.so.3, O_RDONLY) = 3 read(3, [EMAIL PROTECTED]..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0644, st_size=237708, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40063000 old_mmap(NULL, 240628, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40064000 mprotect(0x4009e000, 3060, PROT_NONE) = 0 old_mmap(0x4009e000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x39000) = 0x4009e000 close(3)= 0 open(/lib/libdl.so.2, O_RDONLY) = 3 read(3, \177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0x\32\0\000..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0644, st_size=8792, ...}) = 0 old_mmap(NULL, 11724, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x4009f000 mprotect(0x400a1000, 3532, PROT_NONE) = 0 old_mmap(0x400a1000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x1000) = 0x400a1000 close(3)= 0 open(/lib/libc.so.6, O_RDONLY)= 3 read(3, \177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\344\314..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0755, st_size=1074632, ...}) = 0 old_mmap(NULL, 1089540, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x400a2000 mprotect(0x401a3000, 36868, PROT_NONE) = 0 old_mmap(0x401a3000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x10) = 0x401a3000 old_mmap(0x401a9000, 12292, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x401a9000 close(3)= 0 open(/lib/libc.so.6, O_RDONLY)= 3 read(3, \177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\344\314..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0755, st_size=1074632, ...}) = 0 close(3)= 0 open(/lib/libc.so.6, O_RDONLY)= 3 read(3, \177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\344\314..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0755, st_size=1074632, ...}) = 0 close(3)= 0 open(/lib/libc.so.6, O_RDONLY)= 3 read(3, \177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\344\314..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0755, st_size=1074632, ...}) = 0 close(3)= 0 open(/lib/libc.so.6, O_RDONLY)= 3 read(3, \177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\344\314..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0755, st_size=1074632, ...}) = 0 close(3)= 0 munmap(0x40017000, 7169)= 0 getpid()= 2332 brk(0) = 0x8098bd8 brk(0x809abf8) = 0x809abf8 brk(0x809b000) = 0x809b000 brk(0x809e000) = 0x809e000 brk(0x80a1000) = 0x80a1000 brk(0x80a4000) = 0x80a4000 brk(0x80a6000) = 0x80a6000 stat(/usr/lib/apache/suexec, {st_mode=S_IFREG|S_ISUID|0755, st_size=12564, ...}) = 0 lstat(/etc/apache/httpd.conf, {st_mode=S_IFREG|0644, st_size=35072, ...}) = 0 open(/etc/apache/httpd.conf, O_RDONLY|0x8000) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=35072, ...}) = 0 fstat(3, {st_mode=S_IFREG|0644, st_size=35072, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40017000 read(3,
Re: Telling Emacs how to use Alt as Meta
Christoph Groth schrieb: Joerg Johannes [EMAIL PROTECTED] writes: Hi there Emacs is using the windows key as meta. I'd like to use Alt instead, because I'm used to it from when I was running SuSE and RedHat. Is there an emacs-specific command for the .emacs file to do that? I can understand you. The next keyboard I'll buy won't have those nasty keys. What about declaring your Alt-Keys in XF86Config as Meta? This snippet is taken from the Keyboard section of my /etc/X11/XF86Config snippet LeftAlt Meta RightAltMeta /snippet 'Done this. ALt is still Alt and Windows key is still meta. BTW, where did you last see a keyboard without windows key? joerg -- Did you know that if you play a Windows 2000 cd backwards, you will hear the voice of Satan? That's nothing! If you play it forward, it'll install Windows 2000.
Re: Gnome
Hi, Sorry to but in... try /etc/init.d/xdm stop because xdm is still running. I have had issues with this in the past (though I believe it should work) and needed to find running xdm processes (ps -ef|grep xdm) and kill them and then do /etc/init.d/xdm stop again. I've removed xdm yet have an active /var/log/xdm.log that watches me starting X. What's up? Thanks, Jonathan -- Hey, I think I finally got the hang of i-
100Mbs ether cards talking @ 10Mbs ...
hi, I have two computers connected with a crossover cable (BTW, thanks rw), both with 100Mb/s ethernet cards (SIS900 RealTek 8139) but they seem to be connected only by 10Mb/s (NFS transfers are at a bit more than 1 mbyte/s). I just compiled the drivers into the kernel. am I forgetting to set something ? I think maybe this is a too specific question for this list (sorry), so any pointers to other lists/documents are welcome. thanks, :-) jan ps.: I've read the Ethernet and NFS HOWTO, but found nothing appropriate. ps2.: Kernel (2.4.0-test9) messages about eth0: Machine1: ... 8139too Fast Ethernet driver 0.9.10 loaded eth0: RealTek RTL8139 Fast Ethernet at 0xca82ff00, 00:e0:7d:8c:85:df, IRQ 10 eth0: Identified 8139 chip type 'RTL-8139B' ... Machine 2 (Diskless): ... sis900.c: v1.07.04 09/06/2000 eth0: SiS 900 PCI Fast Ethernet at 0xda00, IRQ 11, 00:d0:09:3c:d9:75. eth0: SiS 900 Internal MII PHY transceiver found at address 1. eth0: Using SiS 900 Internal MII PHY as default ... eth0: Media Link On 100mbps full-duplex ...
Re: 100Mbs ether cards talking @ 10Mbs ...
it might be limited by speed of disks, not by speed of network. try to get some diagnostics for the network card you use (not sure if it's available for your particular card, nor where to find it) and see what it says about conection. also, try some connection that is not disk related, I am not sure how to test it, maybe huge RAM-disk, or write some simple network program, well, two programs, one generating data (faster then 100Mbs), another one reading data... or open few VNCs with some graphics intensive stuff and see what you can squeeze out of the cards... erik Jan Pfeifer wrote: hi, I have two computers connected with a crossover cable (BTW, thanks rw), both with 100Mb/s ethernet cards (SIS900 RealTek 8139) but they seem to be connected only by 10Mb/s (NFS transfers are at a bit more than 1 mbyte/s). I just compiled the drivers into the kernel. am I forgetting to set something ? I think maybe this is a too specific question for this list (sorry), so any pointers to other lists/documents are welcome. thanks, :-) jan ps.: I've read the Ethernet and NFS HOWTO, but found nothing appropriate. ps2.: Kernel (2.4.0-test9) messages about eth0: Machine1: ... 8139too Fast Ethernet driver 0.9.10 loaded eth0: RealTek RTL8139 Fast Ethernet at 0xca82ff00, 00:e0:7d:8c:85:df, IRQ 10 eth0: Identified 8139 chip type 'RTL-8139B' ... Machine 2 (Diskless): ... sis900.c: v1.07.04 09/06/2000 eth0: SiS 900 PCI Fast Ethernet at 0xda00, IRQ 11, 00:d0:09:3c:d9:75. eth0: SiS 900 Internal MII PHY transceiver found at address 1. eth0: Using SiS 900 Internal MII PHY as default ... eth0: Media Link On 100mbps full-duplex ... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: 100Mbs ether cards talking @ 10Mbs ...
I have two computers connected with a crossover cable (BTW, thanks rw), both with 100Mb/s ethernet cards (SIS900 RealTek 8139) but they seem to be connected only by 10Mb/s (NFS transfers are at a bit more than 1 mbyte/s). I just compiled the drivers into the kernel. Try to turn off autodetection mode in cards and set it in 100Mb/s. Serguei.
Re: 100Mbs ether cards talking @ 10Mbs ...
On Tue, 05 Dec 2000 09:13:38 -0200, Jan Pfeifer writes: I have two computers connected with a crossover cable (BTW, thanks rw), both with 100Mb/s ethernet cards (SIS900 RealTek 8139) but they seem to be connected only by 10Mb/s (NFS transfers are at a bit more than 1 mbyte/s). I just compiled the drivers into the kernel. The only way to really measure the speed of the cards (and not of hard disk, nfs-subsystem etc) is to send _huge_ amounts of data really, really fast. Personally I like netcat (it´s debianized) for that sort of stuff, just dd if=/dev/null | netcat 1.2.3.4 and, on the other side netcat -listen /dev/null (I´m not sure about the exact synta, but it´s easy enough). am I forgetting to set something ? I think maybe this is a too specific question for this list (sorry), so any pointers to other lists/documents are welcome. If the cards are autosensing there´s a good possibility that they negotiated 10 mbit/s, most cards come with a DOS-driver where you can explicitly set sppedduplex (they memorize that, so you need only do it once). cheers, rw -- / Ing. Robert Waldner | Network Engineer | T: +43 1 89933 F: x533 \ \ [EMAIL PROTECTED] |KPNQwest/AT | Diefenbachg. 35, A-1150 /
multiple pages fax
Hello since recently I am using a debian computer as a fax machine (it works really good with the mgetty packages). In the same time I am having a number of problems which I was not able to resolve even with a reasonable reading effort. Non of them is a death-blow, but overall they are kind of annoying. Do any of you know: 1) how to glue a multiple paged fax into a single file (It is not fun to print 50 pages one by one) 2) hiw to translate a multiple paged fax (.g3) into something more reasonable--single ps or something like that. In fact I am interested in a package which can do the job in the batch mode. I have been searching the net and found multiple links to the software which is either can not be compiled on my debian box or does not seem to be in development. The mgetty manual tells a lot how to make a g3 file to send but nearly nothing about the inverse process. Right, there are references how to print a file to the laser jet, but what if I want to store my faxes in a kind of archive and want to be able to view them in a good viwer? Hence, the problem is to find not just a reference to a prog on the Net, but to find a solution which actually works. Does anybody have an working solution to share? thanks a lot -- Peter O. Fedichev (Ph.D.) ITP, Innsbruck
update 2.2 - 2.2r2
Hi there Well, my computer has no internet connection itself, so I won't be able to do apt-get dist-update. I must download all packages I need at university, put them on Iomega ZIP's, carry them home ant install them from the ZIP's. Now, is there a way to find out 1.) which packages have changed 2.) which I have to download (I don't need to update the ones I don't have installed yet;-)) ? When all this is done, do I have to put them on my local harddisk in the same directory structure as on the debian mirrors? What will I have to add to my sources.list? This were quite a lot of questions, I know. Is there a howto on such a way to make an update? thanks a lot joerg -- Did you know that if you play a Windows 2000 cd backwards, you will hear the voice of Satan? That's nothing! If you play it forward, it'll install Windows 2000.
Re: multiple pages fax
Peter Fedichev wrote: since recently I am using a debian computer as a fax machine (it works really good with the mgetty packages). In the same time I am having a number of problems which I was not able to resolve even with a reasonable reading effort. Non of them is a death-blow, but overall they are kind of annoying. Do any of you know: 1) how to glue a multiple paged fax into a single file (It is not fun to print 50 pages one by one) 2) hiw to translate a multiple paged fax (.g3) into something more reasonable--single ps or something like that. In fact I am interested in a package which can do the job in the batch mode. I use Hylafax, and exmh as a mail client. For me, faxes with multiple pages end up as a single file which I can display or print with a single mouse-click. I did not have to do anything special to achieve this. -- Oliver Elphick[EMAIL PROTECTED] Isle of Wight http://www.lfix.co.uk/oliver PGP: 1024R/32B8FAA1: 97 EA 1D 47 72 3F 28 47 6B 7E 39 CC 56 E4 C1 47 GPG: 1024D/3E1D0C1C: CA12 09E0 E8D5 8870 5839 932A 614D 4C34 3E1D 0C1C Go ye therefore, and teach all nations, baptizing them in the name of the Father, and of the Son, and of the Holy Ghost; Teaching them to observe all things whatsoever I have commanded you; and, lo, I am with you alway, even unto the end of the world. Amen. Matthew 28:19,20
Re: Betr.: (no subject)
On Tue, Dec 05, 2000 at 11:10:13AM +0100, Piet Knoester wrote: If you are not stuck on System Commander - no need for more than one password - you can also use linux' lilo and put an extra stanza in it for your windows. [please fix your line wrap] lilo also supports different passwords for different images/OSes: boot=/dev/hda map=/boot/map install=/boot/boot.b message=/boot/boot.msg vga=normal compact prompt timeout=30 default=linux image=/boot/vmlinuz label=linux root=/dev/hda1 read-only password=singleusermode restricted image=/boot/vmlinuz.old label=linux root=/dev/hda1 read-only password=backupkernel other=/dev/hda12 label=bloat password=msbloat other=/dev/hda13 label=bloat2 password=anotherpassword grub however only supports one global password AFAICT, which is unfortunate. -- Ethan Benson http://www.alaska.net/~erbenson/ pgpqHMrCcUYun.pgp Description: PGP signature
mt: /dev/nst0: Input/output error
Hope someone can help here... I've been testing out Arkeia as a backup system (it's free for small configurations - server plus two clients - now). I've got a SCSI DLT4000 (Quantum). I think my problem happened when a cron job tried to write to the tape at the same time as I was playing with Arkeia. Now I get: ns1:~ sudo mt -f /dev/nst0 status mt: /dev/nst0: Input/output error The machine is remote so I've tried a soft reboot but to no avail. I don't think it's Arkeia's fault because it happened once before and a poer down reboot did the trick. Is there any way I can clear the fault without physically visiting the machine? I've searched the WWW and, while there are quite a few reports of people havign similar problems, there doesn't seem to be any workable solutions. Thanks in advance. Liam Liam Ward DV4 t: +353 1 672 7250 e: [EMAIL PROTECTED] w: www.dv4.com
HD Error...
Hi, I have some strange error when I try to read my HD (kernel-2.4.0test11) Dec 5 13:54:39 zaya kernel: hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } Dec 5 13:54:39 zaya kernel: hdc: read_intr: error=0x40 { UncorrectableError }, LBAsect=26564179, sector=6553363 Dec 5 13:54:39 zaya kernel: end_request: I/O error, dev 16:03 (hdc), sector 6553363 Any idea what might cause this error? How to get rid of it? How to check my HD for more errors. Its relatively new IBM HD, I don't think it would be physical error... Jirka -- Jiri Klouda [EMAIL PROTECTED] http://atrey.karlin.mff.cuni.cz/~jk
Re: HD Error...
search the archives for DriveReady SeekComplete. this has been discussed to some extent before ;-) rw On Tue, 05 Dec 2000 14:38:13 +0100, Jiri Klouda writes: Hi, I have some strange error when I try to read my HD (kernel-2.4.0test11) Dec 5 13:54:39 zaya kernel: hdc: read_intr: status=0x59 { DriveReady SeekComp lete DataRequest Error } Dec 5 13:54:39 zaya kernel: hdc: read_intr: error=0x40 { UncorrectableError } , LBAsect=26564179, sector=6553363 Dec 5 13:54:39 zaya kernel: end_request: I/O error, dev 16:03 (hdc), sector 6 553363 Any idea what might cause this error? How to get rid of it? How to check my HD for more errors. Its relatively new IBM HD, I don't think it would be physical error... Jirka -- / Ing. Robert Waldner | Network Engineer | T: +43 1 89933 F: x533 \ \ [EMAIL PROTECTED] |KPNQwest/AT | Diefenbachg. 35, A-1150 /
Re: XFree86 4.0.1 packages and Potato
On Tue, 5 Dec 2000 10:45:28 +0100 (CET), Erik Noort said: Hiya I'm wondering how things are standing with XFree86 4.0.1 packages for Debian 2.2 (Potato). I've noticed that they are already available for Woody, but not for Potato. I've tried to compile the woody source package, but I keep recompiling libs to get it the libs compiled I need to get X compiled, so if I would continu I would probably end up having a Woody system. Is there any solution to this, apart from switching to Woody? Thanks a lot in advance, Erik Noort PS I need XF86 4.0.1 to get my Matrox G450 working. I have a mainly potato installation and added XFree86- 4 from woody. Now that its configured it runs without problems. Biggest hassle was the xf86config. I could not get any config setup program (including the preferred dexter) to config the new xserver. Finally setup an ATI rage 128 pro from instructions on a web site. It works fine. However i have not been able to get the matrox G450 working even with the new mga driver from matrox and many configuration attempts. I could never get the xserver to come up. At this point i have no clues about getting the G450 to work under XFree86-4 even with single head display. If you come up with a working xf86Config for the G450 or any suggestions please let me know. I have asked on this list, but no replies yet about G450 working under XF86-4.
Re: XFree86 4.0.1 packages and Potato
On 5 Dec 2000, mikpolniak wrote: On Tue, 5 Dec 2000 10:45:28 +0100 (CET), Erik Noort said: I'm wondering how things are standing with XFree86 4.0.1 packages for Debian 2.2 (Potato). I've noticed that they are already available for Woody, but not for Potato. I've tried to compile the woody source package, but I keep recompiling libs to get it the libs compiled I need to get X compiled, so if I would continu I would probably end up having a Woody system. Is there any solution to this, apart from switching to Woody? I believe the potato debs are on people.debian.org/~branden, and otherwise I believe someone from the Netherlands, CP Botha if I recall correctly, did them too. Scan the archives. If you come up with a working xf86Config for the G450 or any suggestions please let me know. I have asked on this list, but no replies yet about G450 working under XF86-4. Indeed, if you get it to work, PLEASE tell me too, 'cause I've been trying for days now, to no aval. I bought a Matrox, 'cause I wanted to support a company that developes open source drivers, but man, I'm starting to regret that decision ;-) -- Maryann's Law: You can always find what you're not looking for.
Re: X4 and my Voodoo Banshee
I'm having a hell of a time getting this to work. Ahhh, the painful process of learning. I'm running a mostly-clean install of Debian. It'd be wholly clean, except that when I set my sources to woody to get the .debs I'd like, dselect threw in a bunch more and I wasn't inclined to argue :) Anyways, as the subjects says, I'm trying to get X4 running _properly_ with my video card, meaning that I'd like to have proper acceleration of X with my Banshee. I followed the instructions at debianplanet for X4 under 3dfx cards, but it balked at the libglide3 step, and when I searched the packages under dselect I couldn't find it either. But I have installed the proper libglide2 packages, or so it appears. As I understand it, I now have to install the device3dfx packages for libglide2 to run properly. I've downloaded and installed the source .deb, to want compiled kernel sources in /usr/src/linux? I tried out the header-package, ran debian/buildpkg, got a .deb out of that, but it doesn't install properly. So what's the secret? What am I supposed to do? I'm not sure exactly _how_ I'm supposed to compile the .deb myself, so it's possible and likely that I've done something wrong in that regards. I'm willing to compile a kernel, if I have to. I'm willing to reinstall if that's needed. So what am I supposed to do? I'm no pro at this, but I did get 3D acceleration working on my Banshee, so I know it works. Here we go... Glad to see you followed the debainplanet tutorial. Along with cleaning out my old XF3.3.6 stuff, I also removed most (if not all) of my glide/3d stuff. IIFC, you need libglide3 and that's it. Libglide2 and device3dfx are for XF3.3.6. Someone correct me if I'm wrong. I'd look at my installed packages, but, that box is at home. Also, you need to recompile a kernel to support DRI and tdfx. I'm running 2.4.test10. The only problem I with my setup was that my default depth for X was set to 32. It should be 16 as that is what the Voodoo Banshee supports for 3D acceleration. Once I changed that, I had 3d support fullscreen and in windows. Email me if you need more help (am I asking for trouble???). Nigel http://www.flipside.org/vol3/apr00/00ap20a.htm Scott
How get Netscape 6 theme work Mozilla M18??
Hi There's a great theme called Sky Pilot for Netscape 6. Since the browsers are so similiar, will it work with Mozilla. And if so, how? I haven't even managed to get Mozilla's chrome's working... They say they are loading and nothing appears? Thanks, Jonathan -- Hey, I think I finally got the hang of i-
RE: konquerer won't run ...
Take a look at the debian-kde list to stay on top of all this. Last night Ivan was uploading version 2.0.1, and I believe that included ssl support on konqueror (although I'm waiting a few days until it all stabilises) tim -Original Message- From: Rick [SMTP:[EMAIL PROTECTED] Sent: 042000 3:24 PM To: Adam Shand Cc: Debian User List Subject: Re: konquerer won't run ... I just did this last night for the purpose of promoting debian to my gf. To do so, they say to add deb http://kde.tdyc.com potato main crypto optional qt1apps or the miror deb http://kde.rap.ucar.edu potato main crypto optional qt1apps to your /etc/apt/source.list---but I needed to append /debian to the URL, and didn't use the words crypto, optional, or qa1apps (but never tried either). After that, apt-get update, then I believe I did apt-get install kdebase konqueror konsole and startx startkde after terminating xdm. The new KDE is pretty and crisp, but I really like wmaker. note, this is as I recall so there may be a few tweaks or such required...check the ftp site for filenames and directory structure. have fun rick Adam Shand writes: i just tried to switch from windowmaker (which i've been using for years) to kde2. i did: # apt-get install task-kde # echo startkde ~/.xsession # startx when i run kde most things won't run and i get a lot of segfaults. when i open the control panel there's nothing in there. no modules, no icons. when i try and run konquerer (really the reason i'm trying kde cause i'm sick of netscape) it won't even start. is this something that has a known fix? i'm running a mostly woody system (it was pototo but large chucks of it have been upgraded as needed). adam. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- A picture is worth about 25000 characters. Any more and it takes too long to download.
Re: Gnome
On Dec 04 2000, Hubert Chan wrote: Or, if you don't want to change the system default, make a .xsession file in your home directory. Mine says: #!/bin/sh gnome-session Well, that's almost what I do, except that I use exec gnome-session, instead (so that it execs gnome-session in place of the shell script). []s, Roger... -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Rogerio Brito - [EMAIL PROTECTED] - http://www.ime.usp.br/~rbrito/ =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Re: /usr/tmp instead of /tmp
On Dec 04 2000, Lee Maguire wrote: making /tmp a symlink to /var/tmp is usually fine. The only caveat I'm aware of is that it changes some standard housekeeping issues. Not only that, but /tmp is unavailable until /var becomes mounted, which is a bad thing. []s, Roger... -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Rogerio Brito - [EMAIL PROTECTED] - http://www.ime.usp.br/~rbrito/ =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Re: auto load root window image
ktb [EMAIL PROTECTED] wrote: I've got a command I run as a regular user that works just fine from the command line but when I put it in my ~.xinitrc it doesn't work Doesn't work? In what way? the command is - /usr/X11R6/bin/xsetbg -onroot -at 0,0 /home/kent/img.jpg The file also contains fvwm to load the window manager. Permissions for .xinitrc - -rwxr-xr-x1 kent kent 118 Dec 4 21:13 .xinitrc Why isn't this working for me? Do you also have a ~/.xsession file? If you're using a display manager (xdm/gdm/kdm/wdm) rather than startx, ~/.xsession is read rather than ~/.xinitrc. -- Colin Watson [EMAIL PROTECTED]
Re: appropriate compiler for kernel
Stuart Marshall [EMAIL PROTECTED] wrote: I use some kernel patches that cause trouble for the standard debian compiler. The particular errors are like: utime.c: In function `update_jiffies_u': /usr/src/linux/include/asm/mutime-M586.h:73: Invalid `asm' statement: /usr/src/linux/include/asm/mutime-M586.h:73: fixed or forbidden register 0 (ax) was spilled for class AREG. I am told this is due to the standard gcc being more stringent in its handling of clobbers within inline asm statements than the old gcc (2.72). I've seen the same thing in other packages (e.g. koules before I fixed it ;)). I don't want to go back to 2.72 and I understand that there is a redhat package called kgcc which is billed as their standard kernel compiler and it is based on egcs 1.1.2. Does Debian have a similar package or some other recommended kernel compiler? Try the gcc272 package. You can install it alongside the normal gcc package, so you don't have to go back to 2.7.2 as such. Is this a 2.2 or 2.4 kernel? For 2.2, you're best using the older gcc (or so I'm told); for 2.4, you'd be best finding out how the patch you're using could be fixed for the newer gcc. -- Colin Watson [EMAIL PROTECTED]
Re: update 2.2--2.2r2
| is there a way to find out | 1.) which packages have changed | 2.) which I have to download (I don't need to update the ones I don't | have installed yet;-)) From Nils Lohner's announcement: A complete list of the packages that have changed with this release can be found at: http://http.us.debian.org/debian/dists/Debian2.2r2/ChangeLog http://non-us.debian.org/debian-non-us/dists/Debian2.2r2/non-US/ChangeLog It seems that if you've been keeping up with proposed-updates and with debian.security, there is nothing to upgrade in 2.2r2, Jim
Re: Routing question
On Tue, Dec 05, 2000 at 11:58:48AM -0300, Eduardo Gargiulo wrote: :Hi. : :I've tried your configuration and now I can ping the second interface (eth1) from the router, but not the other hosts. I run the following commands : :ifconfig eth1 200.16.224.3 netmask 255.255.255.255 up :route add -host 200.16.224.3 eth1 :route add -host 200.16.224.4 eth1 :route add -host 200.16.224.5 eth1 : :eth0 have 200.16.224.2 and the router 200.16.224.1 :The netmask is 255.255.255.248 First I'm not sure, my suggestion will work so don't bang your head on it for too long. Some things to check though: can you ping all machines from the box you're configuring did you echo 1 /proc/sys/net/ipv4/ip_forward did you set the default gateway properly Another thing to try is a netmask calculator to make sure 255.255.255.248 is what you want. In fact if you're going that far figure out the masking you need on each interface so you don't have to bother with static routing. http://www.csc.fi/english/funet/calc/laskin2.html don't forget when playing with strange subnetting that the network address and broadcast will change too (this calculator shows all the info) -Jon
Re: HD Error...
search the archives for DriveReady SeekComplete. this has been discussed to some extent before ;-) rw Dec 5 13:54:39 zaya kernel: hdc: read_intr: status=0x59 { DriveReady SeekComp lete DataRequest Error } Dec 5 13:54:39 zaya kernel: hdc: read_intr: error=0x40 { UncorrectableError } , LBAsect=26564179, sector=6553363 Dec 5 13:54:39 zaya kernel: end_request: I/O error, dev 16:03 (hdc), sector 6 553363 Unfortunately my problem is slightly different. The messages are different and this situation in particular was not discussed though some person earlier had problems with similar HD (also IBM 30Gb, but a bit different) mine is HD IBM-DTLA-307030. Well... I would really like to know where is problem here. I tried to change DMA, but it says that the function is not avaiable and DMA is off by default (it seems right since even W2k complain about no DMA on this disk). And I tried all 0-3 in hdparm -c, but no help. Here are some more details about my disks: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later hda: QUANTUM FIREBALL EX12.7A, ATA DISK drive hdc: IBM-DTLA-307030, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 24901632 sectors (12750 MB) w/418KiB Cache, CHS=1550/255/63 hdc: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63 Jirka
Re: Loading Modules (PLIP)
I'm following up on a query of my own from some time ago, in case it's of use to anybody who has encountered similar problems. I wrote: |one of my | frustrations since upgrading to 2.2. series kernels has been that I | lost PLIP. If I try to load the plip module, I get just this | error message: | | % insmod plip |Using /lib/modules/2.2.17/net/plip.o |/lib/modules/2.2.17/net/plip.o: init_module: Device or resource |busy |Hint: this error can be caused by incorrect module parameters, |including invalid IO or IRQ parameters The solution was to tell the parport driver explicitly which IRQ to use: echo 7 /proc/parport/0/irq I don't know why this is necessary, but the PLIP module loaded without complaint afterwards. Jim
Re: Telling Emacs how to use Alt as Meta
Hi Joerg, to answer you question let me attache the answer I got when I asked the same question quite some time ago. Works perfectly for me every time I updated ;-) On Tue, Dec 05, 2000 at 11:53:04AM +0100, Joerg Johannes wrote: I can understand you. The next keyboard I'll buy won't have those nasty keys. That exactly the right attitude! BTW, where did you last see a keyboard without windows key? Looking down, yep! ;-) -- Date: Thu, 20 Aug 1998 09:27:46 -0500 From: Jens B. Jorgensen [EMAIL PROTECTED] To: Michael Symalla [EMAIL PROTECTED] CC: Debian User debian-user@lists.debian.org Subject: Re: meta key in emacs Resent-Date: 20 Aug 1998 14:28:51 - Resent-Cc: recipient list not shown: ; Resent-Message-ID: 3zzjG.A.iAD.jKD31@murphy Resent-From: debian-user@lists.debian.org Resent-Sender: [EMAIL PROTECTED] X-Envelope-Sender: [EMAIL PROTECTED] Organization: Business Data Services, Inc. X-Mailer: Mozilla 4.05 [en] (WinNT; I) X-Mailing-List: debian-user@lists.debian.org archive/latest/15768 X-Loop: debian-user@lists.debian.org Precedence: list This problem has come up so many times since hamm started getting used that it almost merits its own HOWTO. What's happened is that you've upgraded X and now you are using the XKEYBOARD extension. As you've noticed, the ALT key now does ALT and the windows key is now the META key. I've argued several times that this is a bug since it changes behavior. Alas no one listens to this raving madman. Where's whatcha do (as root): sed -e 's/Alt_L/Foo_L/' -e 's/Alt_R/Foo_R/' /usr/lib/X11/xkb/symbols/us |\ sed -e 's/Meta_L/Alt_L/' -e 's/Meta_R/Alt_R/' |\ sed -e 's/Foo_L/Meta_L/' -e 's/Foo_R/Meta_R/' /usr/lib/X11/xkb/symbols/us.new mv /usr/lib/X11/xkb/symbols/us /usr/lib/X11/xkb/symbols/us.old mv /usr/lib/X11/xkb/symbols/us.new /usr/lib/X11/xkb/symbols/us Now restart X and Things should work normally. Michael Symalla wrote: Dear Debian users, can anyone help me to let my Alt-key be the metakey in emacs? Now I am using the ESC key, which works fine but is not as comfortable as the ALT key. Thanks a lot. -- Bye Mitch Bye Mitch. -- Michael Symalla (Uni-Dortmund Physik E5) DESY HERA-B Bldg.66/1, Notkestr.85, D-22607 Hamburg voice: 040/8998 4985 fax: 040/8998 4033 In the beginning was the word, and the word was content-type: text/plain pgpFqe4q69DQn.pgp Description: PGP signature
Re: DLINK NIC modules via-rhine.c
John Bagdanoff wrote: On Tue, Dec 05, 2000 at 11:42:26AM +1100, Stephen Lavelle wrote: Hello, I have just installed a DLINK 530TX Nic in a debian 2.2 box. This card uses the via-rhine module However when I do #insmod via-rhine I get: using /lib/modules/2.2.17/net/via-rhine.o /lib/modules/2.2.17/net/via-rhine.o: init_module: Device or resource busy Hint: this error can be caused by incorrect module parameters, including invalid IRQ... The output of #lspci for this device is: 00:10.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3065 (rev 4) I have looked at the drivers page at http://www.scyld.com and for this device I need the via-rhine module 1.07. Debian 2.2 only has version 1.01. scyld.com has a via-rhine.c file which is a correct version, but I cannot get this to compile. Is there a debianised version of vi-rhine.o? Am i barking up the wrong tree completely Regards Stephen I think the driver for this card is RealTek RTL8139. That is defnetly wrong. Go to the dlink website down the latest drivers for your card. Compile them as modules like it is written in the readme. Do not forget to uncomment the lines in /etc/modutils/via-rhine and in /etc/modules.conf similar to: options via-rhine irq=9 add via-rhine in your /etc/modules reboot and have fun I did it and it does work :) John -- Using Linux -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
autorestart pppd
Hello, I am running a little server on a xDSL connection. It worked fine, until I was not able to connect to the server today. After some examination of the logs, I found this in /var/log/messages: pppd[90]: No response to 4 echo-requests pppd[90]: Serial link appears to be disconnected pppd[90]: Connection terminated. (blabla) So it seems that the connection has been lost somehow. Now my question: Is it possible that when something like this happens, pppd will automatically reconnect? In that case, my down time will be minimized after such resets. Any ideas? Thanks, Sebastiaan
Xircom PCMCIA Etherent/Modem Card
Hi, all! Is there anyone have the experience of using: Xircom RealPort CardBus Ethernet 10/100+Modem 56 RBEM56G-100 under Debian Linux Potato 2.2? Does it give any problems to notebooks like Dell or Sony? Could anyone please recommend to me any links got the latest information on PC/Laptop hardware compatibility with Debain Linux? Thanks in advance.
Re: PPP connection.
On 4 Dec 2000, John Hasler wrote: From the pppd man page: 8 The connect script failed (returned a non-zero exit status). Any sugestions? Run pppconfig and try connecting with pon. I did that already... No results... pon starts the connection, seems to make the transaction and dies. After that, poff doesn't even find any pppd... So, I don't know whats going on. Daniel. __ Daniel Doro Ferrante email: [EMAIL PROTECTED] http://www.physics.brown.edu/Users/students/ferrante/index.html Physics Graduate Student - Brown University Course of Molecular Sciences - USP: http://www.cecm.usp.br
Re: Debian GNU/Linux 2.2r2 Released
So basically all I have to do is apt-get dist-upgrade and sit back to watch the show?? --- Nils Lohner [EMAIL PROTECTED] wrote: Debian Projecthttp://www.debian.org/ Debian GNU/Linux 2.2r2 Released [EMAIL PROTECTED] December 5, 2000 News A new revision of the Debian GNU/Linux 2.2 'potato' distribution has been released. This update, version 2.2r2, includes both security updates and fixes to important bugs in the stable distribution. Upgrading to this revision online can be done pointing the 'apt' package tool (see sources.list(5) manpage) to one of Debian's many FTP mirrors. A list is available at: http://www.debian.org/distrib/ftplist A complete list of the packages that have changed with this release can be found at: http://http.us.debian.org/debian/dists/Debian2.2r2/ChangeLog http://non-us.debian.org/debian-non-us/dists/Debian2.2r2/non-US/ChangeLog Files that are included in the update as well as the entire stable and unstable distributions can be found in the locations listed below. Updates that have been accepted into the stable distribution are merged into the stable tree. URLs The current stable distribution: ftp://ftp.debian.org/debian/dists/stable ftp://non-us.debian.org/debian-non-US/dists/stable Proposed updates to the stable distribution: ftp://ftp.debian.org/debian/dists/proposed-updates ftp://non-us.debian.org/debian-non-US/dists/proposed-updates Stable distribution information (release notes, errata, etc.): http://www.debian.org/releases/stable/ Security announcements and information: http://security.debian.org/ About Debian The Debian project is an organization of many users who volunteer their time and effort. Its tasks include maintaining and updating Debian GNU/Linux which is a free distribution of the GNU/Linux operating system, and the development of the Debian GNU/Hurd operating system. Contact Information For further information, please send email to the Debian Press Team [EMAIL PROTECTED] or visit the Debian homepage at http://www.debian.org/. Anthony Towns [EMAIL PROTECTED] is the release manager for the Debian Project. -- Nils Lohner E-Mail: [EMAIL PROTECTED] Debian Press Team Press: [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] = Shel ICQ- 23454126 AIM- CacheMonet Trying to master Storm Linux 2000 http://www.stormix.com/ __ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/
Re: HD Error...
On Tue, 05 Dec 2000 16:28:08 +0100, Jiri Klouda writes: Dec 5 13:54:39 zaya kernel: hdc: read_intr: status=0x59 { DriveReady SeekC omp lete DataRequest Error } I tried to change DMA, but it says that the function is not avaiable and DMA is off by default (it seems right since even W2k complain about no DMA on this disk). And I tried all 0-3 in hdparm -c, but no help. Try running the disk in pio mode 4, this helped me once... rw -- / Ing. Robert Waldner | Network Engineer | T: +43 1 89933 F: x533 \ \ [EMAIL PROTECTED] |KPNQwest/AT | Diefenbachg. 35, A-1150 /
Re: Voodoo 3, XFree 4.0 and DRI
Can anybody tell me, what I have to install / configure to have a working GL-lib based on DRI with hardware acceleration? mfg Mischel S aus P Go to http://www.debianplanet.org and look on the left hand side. There is a nice tutorial on installing XF4 in Debian using a Voodoo card. Scott Ok, I succeeded in installing my voodoo properly, but it is very slow (20fps XFree4.0 DRI, 35 fps XFree3.6 dev3dfx) and applications using GL seems to stop from time to time (for just a second or less). But games are not playable with this. Is this a driver-related issue and can I speed up things a little bit (20fps are ok, but those short freezes of my Quake3 are not)? mfg Mischel S aus P Homepage: http://fsinfo.cs.uni-sb.de/~waldi E-Mail: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] ICQ: #27995885
Re: update 2.2 - 2.2r2
On Tue, Dec 05, 2000 at 01:44:36PM +0100, Joerg Johannes wrote: Hi there Well, my computer has no internet connection itself, so I won't be able to do apt-get dist-update. I must download all packages I need at university, put them on Iomega ZIP's, carry them home ant install them from the ZIP's. Now, is there a way to find out 1.) which packages have changed 2.) which I have to download (I don't need to update the ones I don't have installed yet;-)) ? When all this is done, do I have to put them on my local harddisk in the same directory structure as on the debian mirrors? What will I have to add to my sources.list? This were quite a lot of questions, I know. Is there a howto on such a way to make an update? Read the apt-offline guide (in /usr/share/doc/apt) or look at apt-zip, a package build to do what you want. iirc apt-zip implements some of the technics described in the apt-offline guide. -- ,---. Name: Alson van der Meulen Personal: [EMAIL PROTECTED] School: [EMAIL PROTECTED] `---' Was that your directory? -
xserver-xfree86 4.0.1-9
I'm getting the following error and system hang (can exit with Ctrl-C) Setting up xserver-xfree86 (4.0.1-9) ... /var/lib/dpkg/info/xserver-xfree86.config: [: -eq: unary operator expected Is this a bug, or something I need to fix on my end? Charles Lewis [EMAIL PROTECTED]
Re: auto load root window image
On Tue, Dec 05, 2000 at 03:07:50PM +, Colin Watson wrote: ktb [EMAIL PROTECTED] wrote: I've got a command I run as a regular user that works just fine from the command line but when I put it in my ~.xinitrc it doesn't work Doesn't work? In what way? It doesn't load the pic. the command is - /usr/X11R6/bin/xsetbg -onroot -at 0,0 /home/kent/img.jpg The file also contains fvwm to load the window manager. Permissions for .xinitrc - -rwxr-xr-x1 kent kent 118 Dec 4 21:13 .xinitrc Why isn't this working for me? Do you also have a ~/.xsession file? If you're using a display manager (xdm/gdm/kdm/wdm) rather than startx, ~/.xsession is read rather than ~/.xinitrc. I use startx. kent -- In order to make an apple pie from scratch, you must first create the universe. - Carl Sagan
Re: Voodoo 3, XFree 4.0 and DRI
Can anybody tell me, what I have to install / configure to have a working GL-lib based on DRI with hardware acceleration? mfg Mischel S aus P Go to http://www.debianplanet.org and look on the left hand side. There is a nice tutorial on installing XF4 in Debian using a Voodoo card. Scott Ok, I succeeded in installing my voodoo properly, but it is very slow (20fps XFree4.0 DRI, 35 fps XFree3.6 dev3dfx) and applications using GL seems to stop from time to time (for just a second or less). But games are not playable with this. Is this a driver-related issue and can I speed up things a little bit (20fps are ok, but those short freezes of my Quake3 are not)? Good question...I got this from http://www.linuxgames.com. It was the latest article I found about 3dfx and XF4. It's dated Friday Aug 18 23:26:06 2000. ---START--- There are new XFree86 4.0.1 X Server/Mesa prereleases for the Voodoo Banshee, Voodoo3, Voodoo4 and Voodoo5 available. These drivers should be used in conjunction with XFree86 4.0 and Glide 3 with DRI support (provided). These are the drivers that were used in the demonstrations at 3dfx's Linux World Expo booth. They ran games such as Quake3, Unreal Tournament (with OpenGL renderer), Soldier of Fortune and others. Note these drivers will still not work with, Myth2, Quake2 or other Glide and Mesa2x based applications but, the the DGA mouse bug been has been fixed. Also note, these drivers are still in early development. At this time only a single chip on the board is supported, that means that the board will not run at its full speed potential, nor are Full Scene Antialiasing (FSAA) and T-Buffer Cinematic effects available. As development continues these features will be implemented in the drivers. ---END--- Anyone know if they've been updated since??? Scott
debian-cd.deb for 2.2r2 ?
In http://www.debian.org/releases/stable/ I read: Building CD images People wishing to create CD images for 2.2r2 will need to use the CVS version of 'debian-cd' and not the version currently installed in potato. Is there any deb around which works when one doesn't have time to investigate CVS ? -Igor Mozetic
Re: 3Com network card
On Tue, Dec 05, 2000 at 09:11:19AM +0100, Philipp Schulte wrote: On Tue, Dec 05, 2000 at 12:12:32AM -, Robert Feri wrote: I've heard somwhere that you must firstly disable pp mode under DOS and then try to install it under linux. No, not in DOS. The setting you are talking about is in the BIOS. Um, not in this case. 3Com has a DOS utility on their site which disables PnP mode on the card. There's supposed to be a linux version of this utility as well but I've never used it. -- Nathan Norman - Staff Engineer | A good plan today is better Micromuse Inc. | than a perfect plan tomorrow. mailto:[EMAIL PROTECTED] | -- Patton pgp2iy9T37MHx.pgp Description: PGP signature
Re: autorestart pppd
On Tue, Dec 05, 2000 at 04:41:54PM +0100, Sebastiaan wrote: Hello, I am running a little server on a xDSL connection. It worked fine, until I was not able to connect to the server today. After some examination of the logs, I found this in /var/log/messages: pppd[90]: No response to 4 echo-requests pppd[90]: Serial link appears to be disconnected pppd[90]: Connection terminated. (blabla) So it seems that the connection has been lost somehow. Now my question: Is it possible that when something like this happens, pppd will automatically reconnect? In that case, my down time will be minimized after such resets. look at pppupd, it was at least packaged i think, doesn't appear to be there anymore... if it's gone, compile it from source... -- ,---. Name: Alson van der Meulen Personal: [EMAIL PROTECTED] School: [EMAIL PROTECTED] `---' The backup procedure works fine, but the restore is tricky! -
fetchmail problem
I create .fetchmailrc file in my /home/satyajit . like this : default forcecr poll spnetctg.com with proto POP user satyajit with password fetchall and give command in root # chmod 0710 /home/satyajit/.fetchmailrc I take connection and use this command in my /home/satyajit $ fetchmail -K pop.spnetctg.com password : I give password here but fetchmail give me following error but it show me how many message in my pop server. fetchmail : SMTP connect to localhost failed fetchmail : SMTP transaction error while fetching from pop.spnetctg.com fetchmail : Query status = 10 please help me how can I solve this problem.
Xpdq installation
I want to install xpdq and PDQ sourceforge said that GTK and GLib at least 1.2 is needed (pdq.sourceforge.net/download.html) but when I try to install them using dselect I cannot do it because dselect sais that gtklib and glib are in conflict. So I can install only one o f them and xpdq installation cries out that it has not the lib I didn't install. Can anyone tell me how can I succefully install xpdq ? begin:vcard n:Nims;Adrian x-mozilla-html:FALSE org:Galaxy Telecommunications srl adr:;; version:2.1 email;internet:[EMAIL PROTECTED] title:Network Administrator/System engineer x-mozilla-cpt:;0 fn:Adrian Nims end:vcard
Re: Xircom PCMCIA Etherent/Modem Card
Yes. I have one. Driver support is not reliable in potato. If you fiddle with bringing up and down interfaces and restarting pcmcia, you can occasionally get it to work. The documentation says that support for this card is experimental. From what I hear, the card will be much better supported in the next major release of the pcmcia drivers. Cheers, Tim Wilson H Yau wrote: Hi, all! Is there anyone have the experience of using: Xircom RealPort CardBus Ethernet 10/100+Modem 56 RBEM56G-100 under Debian Linux Potato 2.2? Does it give any problems to notebooks like Dell or Sony? Could anyone please recommend to me any links got the latest information on PC/Laptop hardware compatibility with Debain Linux? Thanks in advance. -- Timothy H. Keitt Department of Ecology and Evolution State University of New York at Stony Brook Phone: 631-632-1101, FAX: 631-632-7626 http://life.bio.sunysb.edu/ee/keitt/
Offline mail reader for several lists
I think you need to ask debian-user about the packages named uqwk and multimail or something like that. Having never used either I can't help, but many many years ago I used a QWK reader to read usenet news. Anything else that is QWK compatible under development? I would almost be interested in a GTK based QWK reader... - Forwarded by Vince Mulhollon/Norlight on 12/05/2000 10:55 AM - Nils Rennebarth [EMAIL PROTECTED]To: Debian Development list debian-devel@lists.debian.org ttgart.de cc: (bcc: Vince Mulhollon/Norlight) Fax to: 12/05/2000 10:31 Subject: Offline mail reader for several lists AM I use procmail to sort my incoming mail (a dozen or so mailinglists) to different folders. To read mail from home, I ssh to the computer at work and read mail with mutt. But as phone lines ar expensive here, instead of spending an hour of online mail reading, I would like to connect, download new mails, disconnect, read and delete most of them, then connect again and write back eventual changes to the folders. Is there a piece of software that allows me to do just that? It doesn't sound like a very exotic problem so someone else might have wanted a solution. Using imap does not count, it won't work offline, as it makes a connection to the server for every message to be read. Nils -- *New* *New* *New*- on shellac records Windows HE- see top 10 reasons to downgrade on Historical Edition http://www.microsoft.com/windowshe (See attached file: att0rnxr.dat) att0rnxr.dat Description: Binary data
Re: DLINK NIC modules via-rhine.c
I too have a D-Link DFE530tx and I'm using the scyld driver. I'm no kernel compile Guru, what errors did you get ? From memory I think I had to add a -I/usr/src/linux/include to the compile command. /usr/src/linux is where the kernel sources are on my machine. The deb package I've used for the source is kernel-source-2.2.17 and then unpacked the kernel-source-2.2.17.tar.bz2 file. Dont forget to get and compile the pci-scan package from scyld also. Hope this is of some help. Derm - Original Message - From: Willi Dyck [EMAIL PROTECTED] To: John Bagdanoff [EMAIL PROTECTED] Cc: Debian User List debian-user@lists.debian.org Sent: Tuesday, December 05, 2000 3:32 PM Subject: Re: DLINK NIC modules via-rhine.c John Bagdanoff wrote: On Tue, Dec 05, 2000 at 11:42:26AM +1100, Stephen Lavelle wrote: Hello, I have just installed a DLINK 530TX Nic in a debian 2.2 box. This card uses the via-rhine module However when I do #insmod via-rhine I get: using /lib/modules/2.2.17/net/via-rhine.o /lib/modules/2.2.17/net/via-rhine.o: init_module: Device or resource busy Hint: this error can be caused by incorrect module parameters, including invalid IRQ... The output of #lspci for this device is: 00:10.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3065 (rev 4) I have looked at the drivers page at http://www.scyld.com and for this device I need the via-rhine module 1.07. Debian 2.2 only has version 1.01. scyld.com has a via-rhine.c file which is a correct version, but I cannot get this to compile. Is there a debianised version of vi-rhine.o? Am i barking up the wrong tree completely Regards Stephen I think the driver for this card is RealTek RTL8139. That is defnetly wrong. Go to the dlink website down the latest drivers for your card. Compile them as modules like it is written in the readme. Do not forget to uncomment the lines in /etc/modutils/via-rhine and in /etc/modules.conf similar to: options via-rhine irq=9 add via-rhine in your /etc/modules reboot and have fun I did it and it does work :) John -- Using Linux -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: fetchmail problem
New Star Service Company wrote: I create .fetchmailrc file in my /home/satyajit . like this : default forcecr poll spnetctg.com with proto POP user satyajit with password fetchall and give command in root # chmod 0710 /home/satyajit/.fetchmailrc I take connection and use this command in my /home/satyajit $ fetchmail -K pop.spnetctg.com password : I give password here but fetchmail give me following error but it show me how many message in my pop server. fetchmail : SMTP connect to localhost failed fetchmail : SMTP transaction error while fetching from pop.spnetctg.com fetchmail : Query status = 10 please help me how can I solve this problem. I think that the problem is not with fetchmail: fetchmail get's you mail from the POP server, but fails to deliver it to your local MTA (sendmail/exim/postfix/qmail/whatever). I had this problem before... I had to remove a smtpd package (IIRC) and change a thing in sendmail configuration... I know this isn't much help, but at least you know where the problem is (if I'm right, that is :) ). yours, fsm -- Frederico Serrano Muñoz GNU: http://www.gnu.org [EMAIL PROTECTED] Debian: http://www.debian.org SDF - Public Access Unix Systems - http://sdf.lonestar.org
Re: autorestart pppd
On Tue, 05 Dec 2000 17:16:01 +0100, Alson van der Meulen writes: On Tue, Dec 05, 2000 at 04:41:54PM +0100, Sebastiaan wrote: Hello, I am running a little server on a xDSL connection. Geez, who not ;-) ? It worked fine, until I was not able to connect to the server today. After some examination of the logs, I found this in /var/log/messages: pppd[90]: No response to 4 echo-requests pppd[90]: Serial link appears to be disconnected pppd[90]: Connection terminated. (blabla) cron is fine for that, for example: * * * * * /bin/ping -c 1 193.154.142.1 /dev/null || \ /usr/local/bin/reconnect /dev/null reconnect just kills all pppd´s (JIC) and all pptp´s (my dsl-connection is over pptp sigh). works just fine. So it seems that the connection has been lost somehow. Now my question: Is it possible that when something like this happens, pppd will automatically reconnect? In that case, my down time will be minimized after such resets. rw -- / Ing. Robert Waldner | Network Engineer | T: +43 1 89933 F: x533 \ \ [EMAIL PROTECTED] |KPNQwest/AT | Diefenbachg. 35, A-1150 /
[OT] Need to sync a directory tree _to_ a WinNT ftp server
Hello, I'm building an HTML tree on Debian potato that I need to move over to a (gasp!) WinNT web server. The web server admin gave me ftp access to the WinNT machine. Ideally, I want to run a script that uses ftp to keep the files on the NT machine in sync with my development tree on Debian (not the reserve). Is there an rsync-like tool that uses ftp only? (I couldn't find an rsync server for NT). Thanks, Peter
Re: samba 2.0.7 vs. 2.0.5
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 A long time ago, in a galaxy far, far way, someone said... Shouldn?t samba 2.0.7 depend on a kernel = 2.2 then? This seems like a bug to me (I ran into the same problem but have put samba on hold since then). IMO that would break when you don't havea 2.2 kernel package installed and do everything the old fasioned way :) But you really should ask the samba package maintainer that question. - -- - -- Phil Brutsche [EMAIL PROTECTED] GPG fingerprint: 9BF9 D84C 37D0 4FA7 1F2D 7E5E FD94 D264 50DE 1CFC GPG key id: 50DE1CFC GPG public key: http://tux.creighton.edu/~pbrutsch/gpg-public-key.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.4 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE6LSRS/ZTSZFDeHPwRAkI7AKDbVijlopsl7O+IM9UlUT1Yh4PG3gCg4YUa LD9wR8uoCxo7ovaI4t6e8Wo= =DS2M -END PGP SIGNATURE-