re: Mldonkey-server ne démarre plus / mlnet démarre
Message du 06/09/10 09:44 De : Aurelien A : debian-user-french@lists.debian.org Copie à : Objet : Mldonkey-server ne démarre plus / mlnet démarre Salut, Depuis mon l'upgrade de Vendredi (SID), mldonkey-server ne démarre plus, ni au démarrage ni via /etc/init.d/mldonkey-server start. Aucun message d'erreur, mais pas de processus mlnet non plus. Par contre, si je tape mlnet en root, alors il démarre, mais il démarre dans le répertoire root, ce qui n'était pas tout à fait l'idée. Pas un message dans les logs de mldonkey ni dans ceux du système. Je n'arrive pas à trouver de posts pertinents (étant donné que mldonkey-server ne démarre pas est une phrase qu'on retrouver un peu partout). Quelqu'un a-t-il une idée ? A plus tard. Aurélien -- Aurélien -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100906074445.gn10...@sebkhachott.net Hello, Il a peut-être reçu une injonction de la Hadopi ? Blague à part, est-ce que tu peux te connecter avec son utilisateur dédié et le lancer à la mano, pour voir comment il se comporte ? Tu as plus de chances d'avoir ainsi des messages probants. Sinon, il n'y a même pas de message dans /var/log/daemon, qui justement doit recevoir les logs des services ? Cordialement, Guillaume -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/22701416.43127.1283761432420.javamail@wwinf1f03
Re: Mldonkey-server ne dém arre plus / mlnet démarre
On Mon, Sep 06, 2010 at 10:23:52AM +0200, Guillaume Caron wrote : Message du 06/09/10 09:44 De : Aurelien Objet : Mldonkey-server ne démarre plus / mlnet démarre Salut, Depuis mon l'upgrade de Vendredi (SID), mldonkey-server ne démarre plus, ni au démarrage ni via /etc/init.d/mldonkey-server start. Aucun message d'erreur, mais pas de processus mlnet non plus. Par contre, si je tape mlnet en root, alors il démarre, mais il démarre dans le répertoire root, ce qui n'était pas tout à fait l'idée. Pas un message dans les logs de mldonkey ni dans ceux du système. Je n'arrive pas à trouver de posts pertinents (étant donné que mldonkey-server ne démarre pas est une phrase qu'on retrouver un peu partout). Quelqu'un a-t-il une idée ? A plus tard. Aurélien Hello, Il a peut-être reçu une injonction de la Hadopi ? Arf, ça serait vraiment pas de bol, vu la fréquence à laquelle je m'en sers ! Blague à part, est-ce que tu peux te connecter avec son utilisateur dédié et le lancer à la mano, pour voir comment il se comporte ? Tu as plus de chances d'avoir ainsi des messages probants. Tu veux dire avec mon utilisateur usuel. Le pb, c'est qu'il marche quand je le lance direct en utilisateur ou en root. Peut-être que je m'en sers mal, mais jusqu'ici, il était démarré tout seul au démarrage, comme démon, l'utilisateur, c'était mldonkey, je crois. Moi j'allais juste sur l'interface web, et c'était OK. Les répertoires de téléchargement étaient dans /var/lib/mldonkey, et je les ai en l'occurence, redirigés (liens symboliques) vers une autre partition plus grande. C'est surtout pour ça que ça me gène, parce que, du coup, comme il ne démarre plus selon ce mode, le résultat, c'est qu'il ne voit plus les downloads qui étaient en cours. Sinon, il n'y a même pas de message dans /var/log/daemon, qui justement doit recevoir les logs des services ? Rien du tout dans les logs à ce sujet, un vide total, à vrai dire. Cordialement, Guillaume -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/22701416.43127.1283761432420.javamail@wwinf1f03 -- Aurélien -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100906093314.gp10...@sebkhachott.net
grub2 et raid
J'ai mes disques en raid1 (via md) et à chaque mise à jour de grub il me redemande sur quel disques il doit s'instamler, me proposant /dev/sda, /dev/sdb et /dev/md0 (la partition de /) à chaque fois je laisse le défaut qui est sda + sdb (comme ça marche...) mais j'aimerais bien avoir une config solide (dont je sois sur qu'elle marche si un des disques meurt) et pérenne (qu'on ne me redemande pas à chaque fois). Que faut-il donc mettre dans la config de grub2 pour que ça marche dans un cas comme ça, qui ne doit quand même pas être si rare ? -- Erwan -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100906093630.ga5...@trusted-logic.com
utilisation des paquets de debug -dbg ?
Bonjour, J'un un programme qui plante avec un core, au beau milieu de la librairie libncurses5. Je voudrais en savoir plus, j'ai donc installé les paquets libc6-dbg et libncurses5-dbg (version Debian Lenny). Malheureusement, si le premier est utilisé, le second semble être ignoré : gdb ecran core.ecran GNU gdb 6.8-debian Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type show copying and show warranty for details. This GDB was configured as i486-linux-gnu... warning: Can't read pathname for load map: Input/output error. Reading symbols from /lib/libncurses.so.5...done. Loaded symbols for /lib/libncurses.so.5 Reading symbols from /usr/lib/libefence.so.0...done. Loaded symbols for /usr/lib/libefence.so.0 Reading symbols from /usr/lib/libstdc++.so.6...done. Loaded symbols for /usr/lib/libstdc++.so.6 Reading symbols from /lib/i686/cmov/libm.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libm-2.7.so...done. done. Loaded symbols for /lib/i686/cmov/libm.so.6 Reading symbols from /lib/libgcc_s.so.1...done. Loaded symbols for /lib/libgcc_s.so.1 Reading symbols from /lib/i686/cmov/libc.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libc-2.7.so...done. done. Loaded symbols for /lib/i686/cmov/libc.so.6 Reading symbols from /lib/i686/cmov/libdl.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libdl-2.7.so...done. done. Loaded symbols for /lib/i686/cmov/libdl.so.2 Reading symbols from /lib/i686/cmov/libpthread.so.0...Reading symbols from /usr/lib/debug/lib/i686/cmov/libpthread-2.7.so...done. done. Loaded symbols for /lib/i686/cmov/libpthread.so.0 Reading symbols from /lib/ld-linux.so.2...Reading symbols from /usr/lib/debug/lib/ld-2.7.so...done. done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /lib/i686/cmov/libnss_files.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_files-2.7.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_files.so.2 Reading symbols from /lib/i686/cmov/libnss_dns.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_dns-2.7.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_dns.so.2 Reading symbols from /lib/i686/cmov/libresolv.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libresolv-2.7.so...done. done. Loaded symbols for /lib/i686/cmov/libresolv.so.2 Core was generated by `ecran -m 8192'. Program terminated with signal 11, Segmentation fault. [New process 13064] #0 0xb76df975 in _nc_freewin () from /lib/libncurses.so.5 (gdb) Du coup, je n'ai pas plus d'information disponible :-( Je voudrais savoir s'il faut recompiler qq chose pour utiliser ces paquets -dbg (ou un lien vers une doc qui explique leur utilisation), et si vous avez une idée du pourquoi gdb utilise les symboles de debug de la libc6 et pas de la libncurses5 ? Fred. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100906114913.76571...@prem6s
Re: Mldonkey-server ne démarre plus / mlnet d émarre
On Mon, 6 Sep 2010 11:33:14 +0200, Aurelien tyran...@free.fr wrote: On Mon, Sep 06, 2010 at 10:23:52AM +0200, Guillaume Caron wrote : Message du 06/09/10 09:44 De : Aurelien Objet : Mldonkey-server ne démarre plus / mlnet démarre Salut, Depuis mon l'upgrade de Vendredi (SID), mldonkey-server ne démarre plus, ni au démarrage ni via /etc/init.d/mldonkey-server start. Aucun message d'erreur, mais pas de processus mlnet non plus. Par contre, si je tape mlnet en root, alors il démarre, mais il démarre dans le répertoire root, ce qui n'était pas tout à fait l'idée. Pas un message dans les logs de mldonkey ni dans ceux du système. Je n'arrive pas à trouver de posts pertinents (étant donné que mldonkey-server ne démarre pas est une phrase qu'on retrouver un peu partout). Quelqu'un a-t-il une idée ? A plus tard. Aurélien Hello, Il a peut-être reçu une injonction de la Hadopi ? Arf, ça serait vraiment pas de bol, vu la fréquence à laquelle je m'en sers ! Blague à part, est-ce que tu peux te connecter avec son utilisateur dédié et le lancer à la mano, pour voir comment il se comporte ? Tu as plus de chances d'avoir ainsi des messages probants. Tu veux dire avec mon utilisateur usuel. Le pb, c'est qu'il marche quand je le lance direct en utilisateur ou en root. Peut-être que je m'en sers mal, mais jusqu'ici, il était démarré tout seul au démarrage, comme démon, l'utilisateur, c'était mldonkey, je crois. Moi j'allais juste sur l'interface web, et c'était OK. Les répertoires de téléchargement étaient dans /var/lib/mldonkey, et je les ai en l'occurence, redirigés (liens symboliques) vers une autre partition plus grande. C'est surtout pour ça que ça me gène, parce que, du coup, comme il ne démarre plus selon ce mode, le résultat, c'est qu'il ne voit plus les downloads qui étaient en cours. Sinon, il n'y a même pas de message dans /var/log/daemon, qui justement doit recevoir les logs des services ? Rien du tout dans les logs à ce sujet, un vide total, à vrai dire. Cordialement, Guillaume -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/22701416.43127.1283761432420.javamail@wwinf1f03 -- Aurélien Salut, Est-ce que tu peux regarder s'il ne resterait pas un fichier mlnet.pid ou config_files_space.tmp dans le répertoire de travail de mldonkey ? Leur présence peut empêcher le démarrage de mlnet. Sinon, n'as tu vraiment rien qui apparaît dans /var/lib/mldonkey/mlnet.log lorsque tu tentes un démarrage avec /etc/init.d/mldonkey start ? A+ Jean-Jacques -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/7a4c5d304a438ea27ab40977a86fa...@localhost
Re: Configuration 3 écrans
Bonjour, D'abord de quoi parle-t-on ? Un bureau étendu sur 3 écrans ou un affichage en miroir sur 3 écrans ? Le 2 septembre 2010 10:06, xuser xuser xu...@freesoftconsulting.com a écrit : Bonjour à Tous, Je suis à la recherche d'un configuration compatible sous linux. Le but du jeu étant de pouvoir faire fonctionner 3 écrans en LVDS ou1 en AGP et 2 en LVDS. Là non plus ce n'est pas clair, le LVDS est une sortie vidéo alors que l'AGP est un bus... Auriez-vous un retour d'expérience sur le sujet ? Ben pour la configuration de xorg, je crois que les options varient pas mal d'un pilote à l'autre... Pour activer et désactiver les différentes sorties sous X il faut voir du coté de xrandr. J'ai tester des configurations mais sans succès par exemple un chipset 945MGE et XGI z7/z9 XG20 la carte 945MGE fonctionne parfaitement mais la XGI nécessite la recompilation du noyau. Et même après la recompilation rien a faire la XGI ne veut pas tourner :( Une idée ? Qu'est ce que tu entends par ne veut pas tourner ? Écran noir au boot ? Kernel panic ? Xorg ne se lance pas ? Quel est le problème si la 945MGE fonctionne parfaitement ? Pourquoi la XGI nécessite-elle la recompilation du noyau ? On joue aux devinettes là... Il faudrait préciser un un peu ce qui fonctionne et ce qui ne fonctionne pas, donner des logs, des messages d'erreur, etc. Cordialement Franck -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktimbg0hrzhbmcql2kqg_19ojjfx0cm8wdemnf...@mail.gmail.com
Re: Mldonkey-server ne démarre plus / mlnet d émarre
On Mon, 6 Sep 2010 13:09:13 +0200, Aurelien tyran...@free.fr wrote: On Mon, Sep 06, 2010 at 11:50:21AM +0200, Jean-Jacques Doti wrote : On Mon, 6 Sep 2010 11:33:14 +0200, Aurelien tyran...@free.fr wrote: On Mon, Sep 06, 2010 at 10:23:52AM +0200, Guillaume Caron wrote : Message du 06/09/10 09:44 De : Aurelien Objet : Mldonkey-server ne démarre plus / mlnet démarre Salut, Depuis mon l'upgrade de Vendredi (SID), mldonkey-server ne démarre plus, ni au démarrage ni via /etc/init.d/mldonkey-server start. Aucun message d'erreur, mais pas de processus mlnet non plus. Par contre, si je tape mlnet en root, alors il démarre, mais il démarre dans le répertoire root, ce qui n'était pas tout à fait l'idée. Pas un message dans les logs de mldonkey ni dans ceux du système. Je n'arrive pas à trouver de posts pertinents (étant donné que mldonkey-server ne démarre pas est une phrase qu'on retrouver un peu partout). Quelqu'un a-t-il une idée ? A plus tard. Aurélien Hello, Il a peut-être reçu une injonction de la Hadopi ? Arf, ça serait vraiment pas de bol, vu la fréquence à laquelle je m'en sers ! Blague à part, est-ce que tu peux te connecter avec son utilisateur dédié et le lancer à la mano, pour voir comment il se comporte ? Tu as plus de chances d'avoir ainsi des messages probants. Tu veux dire avec mon utilisateur usuel. Le pb, c'est qu'il marche quand je le lance direct en utilisateur ou en root. Peut-être que je m'en sers mal, mais jusqu'ici, il était démarré tout seul au démarrage, comme démon, l'utilisateur, c'était mldonkey, je crois. Moi j'allais juste sur l'interface web, et c'était OK. Les répertoires de téléchargement étaient dans /var/lib/mldonkey, et je les ai en l'occurence, redirigés (liens symboliques) vers une autre partition plus grande. C'est surtout pour ça que ça me gène, parce que, du coup, comme il ne démarre plus selon ce mode, le résultat, c'est qu'il ne voit plus les downloads qui étaient en cours. Sinon, il n'y a même pas de message dans /var/log/daemon, qui justement doit recevoir les logs des services ? Rien du tout dans les logs à ce sujet, un vide total, à vrai dire. Cordialement, Guillaume -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/22701416.43127.1283761432420.javamail@wwinf1f03 -- Aurélien Salut, Est-ce que tu peux regarder s'il ne resterait pas un fichier mlnet.pid ou Non, c'est d'ailleurs l'un des moyens qui me permet de voir que ça ne démarre pas. config_files_space.tmp dans le répertoire de travail de mldonkey ? Leur présence peut empêcher le démarrage de mlnet. /var/run/mldonkey est totalement vide : ls -la /var/run/mldonkey/ total 2 drwxr-xr-x 2 mldonkey mldonkey 1024 3 sept. 09:06 . drwxr-xr-x 15 root root 1024 6 sept. 09:33 .. Et une recherche sur config_file* ne me donne rien non plus : .816 Mo /root $ find /var/lib/mldonkey/ -name config_file* .816 Mo /root $ find /var/run/mldonkey/ -name config_file* Sinon, n'as tu vraiment rien qui apparaît dans /var/lib/mldonkey/mlnet.log lorsque tu tentes un démarrage avec /etc/init.d/mldonkey start ? Rien du tout. Le néant. Ca m'ennuie bien aussi, parce que ça ne facilite pas la tache. Pour info, la commande que je lance est /etc/init.d/mldonkey-server start Quelques remarques : - pense à répondre à la liste de diffusion (debian-user-french@lists.debian.org), sinon les autres ne vont plus rien comprendre ;-) - /var/run/mldonkey ne devrait contenir, après démarrage, que le fichier mlnet.pid - tous les fichiers et répertoires de travail de mldonkey doivent se trouver dans /var/lib/mldonkey - les log de mldonkey sont écrites dans le fichier /var/log/mldonkey/mlnet.log Après viennent les questions : 1- est-ce qu'il y a quelque chose dans le fichier /var/log/mldonkey/mlnet.log ? 2- est-ce que ds fichiers bougent (voir date de modification) dans /var/lib/mldonkey ? 3- est que dans le fichier /etc/default/mldonkey-server tu as bien LAUNCH_AT_STARTUP=true ? 4- est-ce que le fichier /var/lib/mldonkey/downloads.ini existe bien et appartient à mldonkey ? 5- est-ce que le fichier de log /var/log/mldonkey/mlnet.log appartient bien à mldonkey (groupe mldonkey) Solutions possible en cas de réponse non aux questions 4 ou 5 : 4- exécuter dpkg-reconfigure mldonkey-server 5- exécuter chown -R mldonkey:mldonkey /var/log/mldonkey/ (bug 593091 : http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=593091) - si c'est ça, à l'avenir pense à regarder le gugtracker Debian (http://bugs.debian.org) lorsque tu
Re: Mldonkey-server ne dém arre plus / mlnet démarre
On Mon, Sep 06, 2010 at 02:22:55PM +0200, Jean-Jacques Doti wrote : On Mon, 6 Sep 2010 13:09:13 +0200, Aurelien tyran...@free.fr wrote: On Mon, Sep 06, 2010 at 11:50:21AM +0200, Jean-Jacques Doti wrote : On Mon, 6 Sep 2010 11:33:14 +0200, Aurelien tyran...@free.fr wrote: On Mon, Sep 06, 2010 at 10:23:52AM +0200, Guillaume Caron wrote : Message du 06/09/10 09:44 De : Aurelien Objet : Mldonkey-server ne démarre plus / mlnet démarre Salut, Depuis mon l'upgrade de Vendredi (SID), mldonkey-server ne démarre plus, ni au démarrage ni via /etc/init.d/mldonkey-server start. Aucun message d'erreur, mais pas de processus mlnet non plus. Par contre, si je tape mlnet en root, alors il démarre, mais il démarre dans le répertoire root, ce qui n'était pas tout à fait l'idée. Pas un message dans les logs de mldonkey ni dans ceux du système. Je n'arrive pas à trouver de posts pertinents (étant donné que mldonkey-server ne démarre pas est une phrase qu'on retrouver un peu partout). Quelqu'un a-t-il une idée ? A plus tard. Aurélien [...] Blague à part, est-ce que tu peux te connecter avec son utilisateur dédié et le lancer à la mano, pour voir comment il se comporte ? Tu as plus de chances d'avoir ainsi des messages probants. Tu veux dire avec mon utilisateur usuel. Le pb, c'est qu'il marche quand je le lance direct en utilisateur ou en root. Peut-être que je m'en sers mal, mais jusqu'ici, il était démarré tout seul au démarrage, comme démon, l'utilisateur, c'était mldonkey, je crois. Moi j'allais juste sur l'interface web, et c'était OK. Les répertoires de téléchargement étaient dans /var/lib/mldonkey, et je les ai en l'occurence, redirigés (liens symboliques) vers une autre partition plus grande. C'est surtout pour ça que ça me gène, parce que, du coup, comme il ne démarre plus selon ce mode, le résultat, c'est qu'il ne voit plus les downloads qui étaient en cours. Sinon, il n'y a même pas de message dans /var/log/daemon, qui justement doit recevoir les logs des services ? Rien du tout dans les logs à ce sujet, un vide total, à vrai dire. Cordialement, Guillaume Salut, Est-ce que tu peux regarder s'il ne resterait pas un fichier mlnet.pid ou Non, c'est d'ailleurs l'un des moyens qui me permet de voir que ça ne démarre pas. config_files_space.tmp dans le répertoire de travail de mldonkey ? Leur présence peut empêcher le démarrage de mlnet. /var/run/mldonkey est totalement vide : ls -la /var/run/mldonkey/ total 2 drwxr-xr-x 2 mldonkey mldonkey 1024 3 sept. 09:06 . drwxr-xr-x 15 root root 1024 6 sept. 09:33 .. Et une recherche sur config_file* ne me donne rien non plus : .816 Mo /root $ find /var/lib/mldonkey/ -name config_file* .816 Mo /root $ find /var/run/mldonkey/ -name config_file* Sinon, n'as tu vraiment rien qui apparaît dans /var/lib/mldonkey/mlnet.log lorsque tu tentes un démarrage avec /etc/init.d/mldonkey start ? Rien du tout. Le néant. Ca m'ennuie bien aussi, parce que ça ne facilite pas la tache. Pour info, la commande que je lance est /etc/init.d/mldonkey-server start Quelques remarques : - pense à répondre à la liste de diffusion Oups, désolé, ça ne m'arrive pas souvent, normalement, j'utilise L dans mutt, et ça va très bien, sans doute un mauvais réflexe... Sorry ! - /var/run/mldonkey ne devrait contenir, après démarrage, que le fichier mlnet.pid Oui, je sais. Mais en fait, il ne contient pas ce fichier y compris après démarrage (enfin, si on peut appeler ça démarrage puisqu'il s'arrête direct). - tous les fichiers et répertoires de travail de mldonkey doivent se trouver dans /var/lib/mldonkey Je sais aussi, d'où ma recherche dans ce fichier pour le fichier que tu me conseillais. - les log de mldonkey sont écrites dans le fichier /var/log/mldonkey/mlnet.log Oui. Ce fichier est interminablement vide. A mon avis le serveur ne se lance même pas, et donc n'a pas le temps d'activer l'écriture des logs. j'ai bien essayé de voir s'il y avait moyen de rendre verbeuse la commande /etc/init.d/mldonkey-server start, mais non. Après viennent les questions : 1- est-ce qu'il y a quelque chose dans le fichier /var/log/mldonkey/mlnet.log ? Non. 2- est-ce que ds fichiers bougent (voir date de modification) dans /var/lib/mldonkey ? Ah, je n'y avais pas pensé. Seulement certains : .816 Mo /root $ ls -l /var/lib/mldonkey/ |grep 6 sept -rw-r--r-- 1 mldonkey mldonkey 33847 6 sept. 09:40 downloads.ini -rw-r--r-- 1 mldonkey mldonkey 77956 6 sept. 20:32 mlnet_strings.fr_FR.UTF-8 drwxr-xr-x 2 mldonkey mldonkey 1024 6 sept. 20:32 mlnet_tmp drwxr-xr-x 2 mldonkey mldonkey 1024 6 sept. 20:32 searches drwxr-xr-x 2 mldonkey mldonkey 1024 6 sept. 20:32 web_infos
[Nota] Backports, casi oficiales
Hola, Ayer recibí esta nota¹ vía news: *** Backports service becoming official September 5th, 2010 The Debian Project is proud to announce that the backports service, previously available at www.backports.org is now an official Debian service available at backports.debian.org. (...) *** Creo que es una buena noticia ¿no? :-) ¹http://www.debian.org/News/2010/20100905 Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.06.08.03...@gmail.com
Re: Problemas con Flash, Iceweasel 3.5.10 y Debian 2.6.32-5
El Sun, 05 Sep 2010 17:10:30 -0300, ciracusa escribió: Me está sucediendo que cuando ingreso a una página que contiene flash (con Iceweasel) se genera un swap al disco interminable generando no solo pérdida de performance sino un ruido bastante molesto. Cuando cargues la página con flash, ejecuta top y ordena las columnas por consumo de CPU o ram, verás el susto que te llevas :-) Alguien sabe que puede estar sucediendo? Que flash es una patata y consume muchos recursos. En equipos modestos casi mejor desactivarlo :-/ En verdad nunca me funcionó bien el Flash sobre equipos con Linux. A mí tampoco... en windows pasa igual, no creas, aunque está más pulido. El plugin es un horror, en todas sus formas y encarnaciones. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.06.08.09...@gmail.com
Debian en PowerEdge T310
A la lista: Estoy corriendo el disco de instalación en un Dell PowerEdge T310 y aparentemente Dell -ni el menú- brindan accesibilidad para la instalación de Debian en estos servidores, sólo están en el menú de selección de S.O.: Red Hat y Suse Enterprise. Tampoco hay opción para instalar un Linux 2.6x genérico. En los documentos de Debian on no hay información sobre este modelo de servidor. ¿Alguien sabe algo al respecto? ¿Alguna idea? Un saludo a la lista, -- Demián
Re: Debian en PowerEdge T310
Debe de tener accesibilidad, primero revisa un poco la configuración de tu PowerEdge T310, revisa si estas booteando el CD activo en el CMOS, segundo que tienes que revisar él o los procesadores del PowerEdge T310, si son i386 ó amd64? , es decir, si trabaja común como los computadores desde i386-i686(32 bits) ó acepta EMT64(64 bits) , todas la arquitecturas de computadoras ( SPARC,RISC,i386,amd64,etc) Debian las soporta, si mal no me equivoco es la Meta Distribución que mas arquitecturas soporta, espero quitado un poco la duda. Saludos, Atentamente, Rafael Urbina G. Caracas - Venezuela Linux User# 434786 De: Demián Pazos demian...@gmail.com Para: Lista Debian debian-user-spanish@lists.debian.org Enviado: lun, septiembre 6, 2010 11:39:26 AM Asunto: Debian en PowerEdge T310 A la lista: Estoy corriendo el disco de instalación en un Dell PowerEdge T310 y aparentemente Dell -ni el menú- brindan accesibilidad para la instalación de Debian en estos servidores, sólo están en el menú de selección de S.O.: Red Hat y Suse Enterprise. Tampoco hay opción para instalar un Linux 2.6x genérico. En los documentos de Debian on no hay información sobre este modelo de servidor. ¿Alguien sabe algo al respecto? ¿Alguna idea? Un saludo a la lista, -- Demián
Re: [Nota] Backports, casi oficiales
On 06/09/2010 5:03, Camaleón wrote: Hola, Ayer recibí esta nota¹ vía news: *** Backports service becoming official September 5th, 2010 The Debian Project is proud to announce that the backports service, previously available at www.backports.org is now an official Debian service available at backports.debian.org. (...) *** Creo que es una buena noticia ¿no? :-) ¹http://www.debian.org/News/2010/20100905 Sin duda, es una buena noticia para los que sufren de versionitis :P Saludos -- Carlos Miranda Molina cmira...@ngen.com.ar -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c852415.2070...@ngen.com.ar
sobre configuración eth0 y eth1
Hola Lista, En wind2003server, Cproxy, para dar servicio a Internet. Tiene este server la configuración siguiente, eth0 192.168.9.1 IP 255.255.255.0 Mascara de subred 192.168.9.1 Servidor DNS Preferido. 192.168.159.163 Servidor DNS alternativo eth1-conectada al router. 192.168.9.2 IP 255.255.255.0 Mascara de subred 192.168.9.254 Puerta de Enlace Predeterminada. 192.168.9.1 Servidor DNS Preferido. 192.168.159.163 Servidor DNS alternativo con esta configuración, puedo hacer ping al 192.168.159.167 (proxy nodo) y da respuesta satisfactoriamente, Ahora, comencé a configurar las dos interfaces para debian, otro server. en la interfaz eth0 192.168.9.3 IP 255.255.255.0 Mascara de subred 192.168.9.1 Servidor DNS. En la interfaz eth1 Cómo logro configurar esta interfaz, y pueda hacer ping al 192.168.159.167 esta configuración de eth1 en wind, no se como lograrla en debian. disculpen el mal empleo del lenguaje técnico. gracias y disculpen por su tiempo, sld2. liuber's -- Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas Infomed: http://www.sld.cu/ -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009061331.02403.liu...@fts.vcl.sld.cu
Re: [Nota] Backports, casi oficiales
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 El 06/09/10 19:25, Carlos Miranda Molina escribió: Sin duda, es una buena noticia para los que sufren de versionitis :P Saludos Ya está uno para las versionitis... :P:P:P:P - -- Slds. de Santiago José López Borrazás. -BEGIN PGP SIGNATURE- iQIVAwUBTIUw84FZAuZYtJmMAQqlfQ/+PpuwY2wezjJS9vI9zu8kBYkQ248yIQNt S2nL2VIpkrpUVZ534iKd99xi9qeFLbbst7xA+xsJzGM31EvIS2fIPpdtE9CGgmDl ldWt/VQVKl519IOPoGznjAV6VUUd4eq7caVIDi104bRoeG769gPslA1E9vB2PpOU KnlYsviKs/rcwCFD219oFemD5qz7Emxdc8P3+TL3Hc8l5Izc953LnGNkL6w44fT1 CxAWr+rgeIgjO7BUvpur3391Pih0XwxSsXbCClYvKgaTeMFEoOkMPvNXxzOLXoBc gGveZ1sqkbqKK70TDjN0MxSM+LNwC6MiOdC1S8ot7IWcXuzglrRKpnM+1t6A/lil akaQMTVZ8F9Vvtw6wEwIv7CXXHMI+37aryjxHqydWqZWY8Negvp7M46nYp6e63J6 BYlaylF1biWV+BpGcBJ5n1YqQd0KTZBnmvmqoEVEYFpn8bUIwuJSq4tuZRdLvgfH iQVQON7v2L/jx69KCMU5mlTeQw/QXB++YnbhCGUZHxFuQFb5BgK39OzjZZI2/ttW Rs8/RZT1la7YifLCEhrSLAdx0hbwWYsYuIH2KDkiNRU9E4YAJtlaZefSOOPl6mzZ 2jTtKiV077gsgYoW/VTWqTVit03fuZS/EUvn4Cij9EsBgTAotvvFKTBPXs4L96po iJiITh81TjE= =ZBRm -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c8530f3.9030...@sjlopezb.yahoo.es
Re: Debian en PowerEdge T310
El Mon, 06 Sep 2010 13:09:26 -0300, Demián Pazos escribió: Estoy corriendo el disco de instalación en un Dell PowerEdge T310 y aparentemente Dell -ni el menú- brindan accesibilidad para la instalación de Debian en estos servidores, sólo están en el menú de selección de S.O.: Red Hat y Suse Enterprise. Tampoco hay opción para instalar un Linux 2.6x genérico. Creo que Dell sólo soporta oficialmente RedHat y SLES: http://linux.dell.com/distributions.shtml Lo cual no impide que instales la versión de linux que prefieras, teniendo en cuenta que es posible que pierdas el soporte de producto. No sé cómo funciona Dell en ese aspecto :-? Precisamente lo comentaban en una de sus listas: *** Will Debian Lenny run on t310? http://lists.us.dell.com/pipermail/linux-poweredge/2010-July/042814.html *** En los documentos de Debian on no hay información sobre este modelo de servidor. ¿Alguien sabe algo al respecto? ¿Alguna idea? Puedes iniciar con la versión LiveCD de Debian para ver qué componentes te reconoce y cuáles no, antes de tomar una decisión. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.06.18.31...@gmail.com
Re: sobre configuración eth0 y eth1
El Mon, 06 Sep 2010 13:31:02 +0200, Liuber Hernández Leyva escribió: (...) Ahora, comencé a configurar las dos interfaces para debian, otro server. en la interfaz eth0 192.168.9.3 IP 255.255.255.0 Mascara de subred 192.168.9.1 Servidor DNS. En la interfaz eth1 Cómo logro configurar esta interfaz, y pueda hacer ping al 192.168.159.167 esta configuración de eth1 en wind, no se como lograrla en debian. disculpen el mal empleo del lenguaje técnico. Supongo que tendrías que crear la ruta correspondiente con route add. A ver si alguien te puede afinar el comando exacto porque las redes no son mi fuerte :-P Por cierto, tienes documentación excelente sobre la configuración del enrutado en Debian en la guía de referencia: http://www.debian.org/doc/manuals/debian-reference/ch-gateway.es.html Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.06.19.09...@gmail.com
Re: sobre configuración eth0 y eth1
El día 6 de septiembre de 2010 06:31, Liuber Hernández Leyva liu...@fts.vcl.sld.cu escribió: Hola Lista, En wind2003server, Cproxy, para dar servicio a Internet. Tiene este server la configuración siguiente, eth0 192.168.9.1 IP 255.255.255.0 Mascara de subred 192.168.9.1 Servidor DNS Preferido. 192.168.159.163 Servidor DNS alternativo eth1-conectada al router. 192.168.9.2 IP 255.255.255.0 Mascara de subred 192.168.9.254 Puerta de Enlace Predeterminada. 192.168.9.1 Servidor DNS Preferido. 192.168.159.163 Servidor DNS alternativo con esta configuración, puedo hacer ping al 192.168.159.167 (proxy nodo) y da respuesta satisfactoriamente, Ahora, comencé a configurar las dos interfaces para debian, otro server. en la interfaz eth0 192.168.9.3 IP 255.255.255.0 Mascara de subred 192.168.9.1 Servidor DNS. En la interfaz eth1 Cómo logro configurar esta interfaz, y pueda hacer ping al 192.168.159.167 esta configuración de eth1 en wind, no se como lograrla en debian. disculpen el mal empleo del lenguaje técnico. gracias y disculpen por su tiempo, sld2. liuber's Te paso la info general, tendrás que adaptarla a tu red sea [direccion_ip] la direccion IP de tu adaptador [mascara_de_red] la mascara de red [puerta_de_enlace_predeterminada] la direccion de tu gateway [servidor_DNS_1] y [servidor_DNS_2] Las direcciones de los DNS Server ifconfig eth1 [direccion_ip] netmask [mascara_de_red] como paso adicional puedes bajar y subir la eth1 para que guarde la config ifconfig eth1 down ifconfig eth1 up route add default gw [puerta_de_enlace_predeterminada] Aquí, deberias de poder dar ping a los nodos de tu red, manejados por el gateway especificado arriba edita /etc/resolv.conf alli agrega nameserver [servidor_DNS_1] nameserver [servidor_DNS_2] Suerte -- Hector -- El Pic no pudo Iniciar correctamente. Inserte el disco de arranque y presione cualquier pin para continuar... Linux Registered User #467500 http://counter.li.org/ -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikvzdcp0fjpqvkbus81sxbfo_yaz2d87-hsq...@mail.gmail.com
Re: Problemas drivers propietarios nvidia con Geforce2 mx/mx 400 [Solucionado]
Después de mucho mirar me di cuenta en el directorio /usr/lib había librerias como libGL.so.96.43.14 con enlace simbolicos libGL.so.1 apuntando a estas librerias, las cuales debía ser la versión antigua instalada com m-a y que no se desinstaló bien por alguna razón, (lo desinstalé con aptitude). También había alguna librería mas con la versión 96.43.14. Estas y sus respectivos enlaces simbólicos los he borrado manualmente y después he instalado el paquete NVIDIA-Linux-x86-96.43.18-pkg1.run y todo perfecto. Parece que puede haber problemas si se instalan estos modulos por diferentes fuentes. El día 28 de agosto de 2010 10:01, Ric M ric.deb...@gmail.com escribió: Hola, Tengo una tarjeta nvidia Geforce2 mx/mx 400, la tenia funcionando con los drivers nvidia instalados con el module-assistant, pero en una de las actualizaciones que hice dejo de funcionar. Tengo debian sqeeze con sid para poder descargar los drivers de nvidia. Decidí instalarmelo descargandolo de la página de nvidia, la versión que requiere mi tarjeta es la 96.xx, me descargué NVIDIA-Linux-x86-96.43.18-pkg1.run. Con /etc/init.d/gdm stop paré las x Con aptitude desinstalé los paquetes de nvidia y con sh NVIDIA-Linux-x86-96.43.18-pkg1.run ejecuté la instalación. En principio me daba un mensaje del compilador, decía algo así como que la versión del compilador actual no era la misma con la que se había compilado el kernel. mirando en /usr/bin vi que tenia las versiones gcc-4.3 gcc-4.4 y un enlace gcc apuntando a gcc-4.4. Borré el enlace y con ln -s gcc-4.3 gcc cree uno a la versión anterior, con lo que en el mensaje (warning) dejo de salir y la instalación finalizó correctamente. inicio las x con previa configuracion del fichero /etc/X11/xrog.conf /etc/init.d/gdm start y todo parece funcionar correctamente pero al reiniciar, ya no vuelve a arrancar el entorno gráfico, da unos pantallazos como intentando arrancar pero no lo hace. Mirando el archivo log de xorg no da errores solo algunos warnigs que yo creo no son importantes para que arranque, y el caso es que la primera vez. ¿Puede que al desintalar los paquetes nvidia instalados con m-a quetara algo necesario? -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlkti=zvbvcx8x2c1qgzze_4k12frsdpeqnukhz_...@mail.gmail.com
Re: sobre configuración eth0 y eth1
El 06/09/2010, a las 21:26, Hector Garcia hectorogar...@gmail.com escribió: El día 6 de septiembre de 2010 06:31, Liuber Hernández Leyva liu...@fts.vcl.sld.cu escribió: Hola Lista, En wind2003server, Cproxy, para dar servicio a Internet. Tiene este server la configuración siguiente, eth0 192.168.9.1 IP 255.255.255.0 Mascara de subred 192.168.9.1 Servidor DNS Preferido. 192.168.159.163 Servidor DNS alternativo eth1-conectada al router. 192.168.9.2 IP 255.255.255.0 Mascara de subred 192.168.9.254 Puerta de Enlace Predeterminada. 192.168.9.1 Servidor DNS Preferido. 192.168.159.163 Servidor DNS alternativo con esta configuración, puedo hacer ping al 192.168.159.167 (proxy nodo) y da respuesta satisfactoriamente, Ahora, comencé a configurar las dos interfaces para debian, otro s erver. en la interfaz eth0 192.168.9.3 IP 255.255.255.0 Mascara de subred 192.168.9.1 Servidor DNS. En la interfaz eth1 Cómo logro configurar esta interfaz, y pueda hacer ping al 192.168.159.16 7 esta configuración de eth1 en wind, no se como lograrla en debian. disculpen el mal empleo del lenguaje técnico. gracias y disculpen por su tiempo, sld2. liuber's Te paso la info general, tendrás que adaptarla a tu red sea [direccion_ip] la direccion IP de tu adaptador [mascara_de_red] la mascara de red [puerta_de_enlace_predeterminada] la direccion de tu gateway [servidor_DNS_1] y [servidor_DNS_2] Las direcciones de los DNS Server ifconfig eth1 [direccion_ip] netmask [mascara_de_red] como paso adicional puedes bajar y subir la eth1 para que guarde la config ifconfig eth1 down ifconfig eth1 up route add default gw [puerta_de_enlace_predeterminada] Aquí, deberias de poder dar ping a los nodos de tu red, manejados por el gateway especificado arriba edita /etc/resolv.conf alli agrega nameserver [servidor_DNS_1] nameserver [servidor_DNS_2] Suerte -- Hector -- El Pic no pudo Iniciar correctamente. Inserte el disco de arranque y presione cualquier pin para continuar... Linux Registered User #467500 http://counter.li.org/ -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikvzdcp0fjpqvkbus81sxbfo_yaz2d87-hsq...@mail.gmail.com Dependiendo de si el ip forwarding está activo o no, ¿cierto?. Saludos, Ramses -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1bb0c099-83fd-4b18-9ff1-c63936d50...@gmail.com
Re: sobre configuración eth0 y eth1
2010/9/6 Liuber Hernández Leyva liu...@fts.vcl.sld.cu Hola Lista, En wind2003server, Cproxy, para dar servicio a Internet. Tiene este server la configuración siguiente, eth0 192.168.9.1 IP 255.255.255.0 Mascara de subred 192.168.9.1 Servidor DNS Preferido. 192.168.159.163 Servidor DNS alternativo eth1-conectada al router. 192.168.9.2 IP 255.255.255.0 Mascara de subred 192.168.9.254 Puerta de Enlace Predeterminada. 192.168.9.1 Servidor DNS Preferido. 192.168.159.163 Servidor DNS alternativo con esta configuración, puedo hacer ping al 192.168.159.167 (proxy nodo) y da respuesta satisfactoriamente, Ahora, comencé a configurar las dos interfaces para debian, otro server. en la interfaz eth0 192.168.9.3 IP 255.255.255.0 Mascara de subred 192.168.9.1 Servidor DNS. En la interfaz eth1 Cómo logro configurar esta interfaz, y pueda hacer ping al 192.168.159.167 esta configuración de eth1 en wind, no se como lograrla en debian. disculpen el mal empleo del lenguaje técnico. Pues puedes configurar eth1 de la misma forma que has configurado eth0. Como lo has hecho? ifconfig? network manager? editando el fichero interfaces? Si has podido con una puedes con dos ;) -- Marc
Re: hardw antiguo
El sáb, 04-09-2010 a las 02:41 +0200, alejo piulachs escribió: mande una pregunta a debian-proj...@lists.debian.org y me dieron esta direccion bueno tengo un ordenador viejo de 16bits con 1giga y yo pense en 16 bits ??? 1 giga?? de que?? como direcciona??? usarlo como servidor dns el problema es el software que tengo etch tenia woody pero lo perdi e igualmente no se podria podriais darme consejo porfa? no quiero tirar el ordenador saludos -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1283816389.2658.0.ca...@gabita2.angel-alvarez.com.ar
Fosscomm 2011
Η ομάδα οργάνωσης των συνεδρίων Fosscomm σαν ανακοινώνει με χαρά, ότι άρχισε η υποβολή υποψηφιοτήτων μέχρι τις 30 Σεπτεμβρίου από συλλόγους/κοινότητες/ομάδες που ασχολούνται με το ελεύθερο λογισμικό στην Ελλάδα, και ενδιαφέρονται να διοργανώσουν το επόμενο Fosscomm. Το συνέδριο θα πραγματοποιηθεί την Άνοιξη του 2011, σε ημερομηνία που θα επιλέξει η εκλεγείσα οργανωτική επιτροπή. Η διοργάνωση και ο χώρος διεξαγωγής θα πρέπει να τηρεί τις εξής προϋποθέσεις: α) Μια κύρια αίθουσα ομιλιών χωρητικότητας τουλάχιστον 100 ατόμων β) Δύο αίθουσες με υπολογιστές που θα χρησιμοποιηθούν στα workshops, χωρητικότητας τουλάχιστον 20 ατόμων έκαστη. γ) Δυνατότητα για επιπλέον αίθουσες σε περίπτωση που υπάρξει πληθώρα παρουσιάσεων/ομιλιών/workshops δ) Μικροφωνικές εγκαταστάσεις (τουλάχιστον) στην κύρια αίθουσα παρουσιάσεων/ομιλιών ε) Μπουφές με καφέ, αναψυκτικά, νερό και μικρά γεύματα (σνακ) ζ) Να υπάρχει δυνατότητα σύνδεσης και παροχής διαδικτύου στην αίθουσα και στους γύρω χώρους. η) Καταγραφή των ομιλιών σε βίντεο και διάθεσή τους στην ιστοσελίδα του συνεδρίου μετά από εύλογο χρονικό διάστημα με άδεια Creative Commons. Συνίσταται επίσης, να υπάρχει η δυνατότητα ζωντανής μετάδοσης του συνεδρίου στο διαδίκτυο μέσο video streaming. Μετά την εκλογή της, η οργανωτική επιτροπή, καλείται: α) Να δημιουργήσει την ιστοσελίδα της εντός του domain του fosscomm.gr β) Να ανακοινώσει την ημερομηνία διεξαγωγής του συνεδρίου γ) Να ενημερώσει έγκαιρα τον κόσμο, για διαδικαστικά ζητήματα όπως η μεταφορά προς το συνέδριο, επιλογές διαμονής στην πόλη, κά. δ) Να φροντίσει για την καλύτερη δυνατή διοργάνωση του συνεδρίου Από την πλευρά μας, θα παρέχουμε τις γνώσεις και την εμπειρία που αποκτήσαμε από τα προηγούμενα Fosscomm, ώστε να βοηθήσουμε την οργανωτική επιτροπή στο δύσκολο έργο της. Το email που θα δεχόμαστε τις υποβολές των υποψηφιοτήτων είναι το omada [at] fosscomm [.] gr Με τιμή, Η ομάδα Fosscomm
Squid 2 Links
Galera, tenho 2 links de internet e preciso que metade da empresa sia por 1 link e outra metada por outro link. Fiz as configurações do iproute e tudo certo. Porem quando a pessoa navega ela vai pelo link default. Criei estas regras no proxy que resolveu isso # -- ACL Balanceamento Link -- acl ips_link1 src /srv/squid/EmbVBL tcp_outgoing_address 189.3.9.14 ips_link1 acl ips_link2 src /srv/squid/EmbPME tcp_outgoing_address 192.168.1.2 ips_link2 Porem ta ocorrendo o seuinte. Quando um dos links sai do ar, ele para de funcionar. Alguem solução no squid que possa fazer com que so navegue quando o link esta on, se estiver off todos sai pelo segundo? Aguardo... Att aGustavo
Re: Squid 2 Links
Ate onde eu sei o squid só consegue trabalhar pelo link default. At. Em 6 de setembro de 2010 12:37, gunix gustavo.gru...@gmail.com escreveu: Galera, tenho 2 links de internet e preciso que metade da empresa sia por 1 link e outra metada por outro link. Fiz as configurações do iproute e tudo certo. Porem quando a pessoa navega ela vai pelo link default. Criei estas regras no proxy que resolveu isso # -- ACL Balanceamento Link -- acl ips_link1 src /srv/squid/EmbVBL tcp_outgoing_address 189.3.9.14 ips_link1 acl ips_link2 src /srv/squid/EmbPME tcp_outgoing_address 192.168.1.2 ips_link2 Porem ta ocorrendo o seuinte. Quando um dos links sai do ar, ele para de funcionar. Alguem solução no squid que possa fazer com que so navegue quando o link esta on, se estiver off todos sai pelo segundo? Aguardo... Att aGustavo -- --- At. Guilherme Moraes Da Fonseca *LPIC1 - Linux Professional Institute Certified** * *CLA - Novell Certified Linux Administrator* *DCTS - Novell Data Center Technical Specialist* ** Analista de Suporte Gnu/Linux
Re: Squid 2 Links
Com este comando uqe postei eu consigo trabalhar com + de 1 Link. O problema é que quando esta com o link off, ele não joga as conexões no link default. Em 6 de setembro de 2010 13:11, Guilherme Moraes guimfons...@gmail.comescreveu: Ate onde eu sei o squid só consegue trabalhar pelo link default. At. Em 6 de setembro de 2010 12:37, gunix gustavo.gru...@gmail.com escreveu: Galera, tenho 2 links de internet e preciso que metade da empresa sia por 1 link e outra metada por outro link. Fiz as configurações do iproute e tudo certo. Porem quando a pessoa navega ela vai pelo link default. Criei estas regras no proxy que resolveu isso # -- ACL Balanceamento Link -- acl ips_link1 src /srv/squid/EmbVBL tcp_outgoing_address 189.3.9.14 ips_link1 acl ips_link2 src /srv/squid/EmbPME tcp_outgoing_address 192.168.1.2 ips_link2 Porem ta ocorrendo o seuinte. Quando um dos links sai do ar, ele para de funcionar. Alguem solução no squid que possa fazer com que so navegue quando o link esta on, se estiver off todos sai pelo segundo? Aguardo... Att aGustavo -- --- At. Guilherme Moraes Da Fonseca *LPIC1 - Linux Professional Institute Certified** * *CLA - Novell Certified Linux Administrator* *DCTS - Novell Data Center Technical Specialist* ** Analista de Suporte Gnu/Linux
Re: Squid 2 Links
amigo, tenho o mesmo ambiente que vc disse, talvez ateh um pouco pior, pois um dos links tem ip dinamico. uso as mesma configurações, mais as configurações de iproute2. até aonde sei, essas configurações para dividir as saidas (ACL´s), não trabalham com automatização, se por acaso um link cair, rotear os clientes para o outro link. não sei se existe uma configuração com essa finalidade dentro so squid. idéia 1: vc poderia criar um script que monitore os links (iptables + mark + ping) e utilizando sed, vc edita o squid de acordo com a necessidade, roteando os usuarios para cada link de sua necessidade. ideia 2: vc pode fazer o mesmo esquema de monitoramento acesso, porém ter 3 squid.conf: squidlink1.conf squidlink2.conf e squiddefault.conf, e criar um link simbolico de squid.conf para cada um desses 3 arquivos de configuração, de acordo com o alerta do seu script, porém acho mais dificil dessa forma para administrar as novas regras entre os 3 arquivos de configuração (novas ACL´s, e etc). Flw [.]´s Serial Em 6 de setembro de 2010 14:58, gunix gustavo.gru...@gmail.com escreveu: Com este comando uqe postei eu consigo trabalhar com + de 1 Link. O problema é que quando esta com o link off, ele não joga as conexões no link default. Em 6 de setembro de 2010 13:11, Guilherme Moraes guimfons...@gmail.comescreveu: Ate onde eu sei o squid só consegue trabalhar pelo link default. At. Em 6 de setembro de 2010 12:37, gunix gustavo.gru...@gmail.comescreveu: Galera, tenho 2 links de internet e preciso que metade da empresa sia por 1 link e outra metada por outro link. Fiz as configurações do iproute e tudo certo. Porem quando a pessoa navega ela vai pelo link default. Criei estas regras no proxy que resolveu isso # -- ACL Balanceamento Link -- acl ips_link1 src /srv/squid/EmbVBL tcp_outgoing_address 189.3.9.14 ips_link1 acl ips_link2 src /srv/squid/EmbPME tcp_outgoing_address 192.168.1.2 ips_link2 Porem ta ocorrendo o seuinte. Quando um dos links sai do ar, ele para de funcionar. Alguem solução no squid que possa fazer com que so navegue quando o link esta on, se estiver off todos sai pelo segundo? Aguardo... Att aGustavo -- --- At. Guilherme Moraes Da Fonseca *LPIC1 - Linux Professional Institute Certified** * *CLA - Novell Certified Linux Administrator* *DCTS - Novell Data Center Technical Specialist* ** Analista de Suporte Gnu/Linux -- [.]´s ..:: S.e.r.i.a.L ::..
Re: Squid 2 Links
boa dica... fiz isso aqui. Vamos ver se resolve o problema :) Valeu amigos Em 6 de setembro de 2010 15:23, ..:: S.e.r.i.a.L ::.. skr...@gmail.comescreveu: amigo, tenho o mesmo ambiente que vc disse, talvez ateh um pouco pior, pois um dos links tem ip dinamico. uso as mesma configurações, mais as configurações de iproute2. até aonde sei, essas configurações para dividir as saidas (ACL´s), não trabalham com automatização, se por acaso um link cair, rotear os clientes para o outro link. não sei se existe uma configuração com essa finalidade dentro so squid. idéia 1: vc poderia criar um script que monitore os links (iptables + mark + ping) e utilizando sed, vc edita o squid de acordo com a necessidade, roteando os usuarios para cada link de sua necessidade. ideia 2: vc pode fazer o mesmo esquema de monitoramento acesso, porém ter 3 squid.conf: squidlink1.conf squidlink2.conf e squiddefault.conf, e criar um link simbolico de squid.conf para cada um desses 3 arquivos de configuração, de acordo com o alerta do seu script, porém acho mais dificil dessa forma para administrar as novas regras entre os 3 arquivos de configuração (novas ACL´s, e etc). Flw [.]´s Serial Em 6 de setembro de 2010 14:58, gunix gustavo.gru...@gmail.com escreveu: Com este comando uqe postei eu consigo trabalhar com + de 1 Link. O problema é que quando esta com o link off, ele não joga as conexões no link default. Em 6 de setembro de 2010 13:11, Guilherme Moraes guimfons...@gmail.comescreveu: Ate onde eu sei o squid só consegue trabalhar pelo link default. At. Em 6 de setembro de 2010 12:37, gunix gustavo.gru...@gmail.comescreveu: Galera, tenho 2 links de internet e preciso que metade da empresa sia por 1 link e outra metada por outro link. Fiz as configurações do iproute e tudo certo. Porem quando a pessoa navega ela vai pelo link default. Criei estas regras no proxy que resolveu isso # -- ACL Balanceamento Link -- acl ips_link1 src /srv/squid/EmbVBL tcp_outgoing_address 189.3.9.14 ips_link1 acl ips_link2 src /srv/squid/EmbPME tcp_outgoing_address 192.168.1.2 ips_link2 Porem ta ocorrendo o seuinte. Quando um dos links sai do ar, ele para de funcionar. Alguem solução no squid que possa fazer com que so navegue quando o link esta on, se estiver off todos sai pelo segundo? Aguardo... Att aGustavo -- --- At. Guilherme Moraes Da Fonseca *LPIC1 - Linux Professional Institute Certified** * *CLA - Novell Certified Linux Administrator* *DCTS - Novell Data Center Technical Specialist* ** Analista de Suporte Gnu/Linux -- [.]´s ..:: S.e.r.i.a.L ::..
Como identificar um modem
Caros colegas, estou configurando uma máquina para meu pai e tenho que ajustar algumas coisas antes de passar pra ele. Uma delas é o modem para ele usar linha discada. Utilizei o lspci e o lsusb mas não vejo nada. O notebook é um toshiba satellite A200-AH3. Podem me ajudar? vejam o resultado dos ls: dan...@maquina:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 04:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01) 06:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 06:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 06:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) 06:04.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller dan...@maquina:~$ lsusb Bus 005 Device 003: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 005 Device 002: ID 04f2:b008 Chicony Electronics Co., Ltd Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Muito obrigado. Daniel -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktimyyqrszgxxmsxcw5iularejd01_uxrbpzrh...@mail.gmail.com
Como determinar um programa para abrir um determinado arquivo?
Caros colegas, estou enfrentando um pequeno problema no computador do meu irmão, que usa Ubuntu. Suponhamos que ele abra o Open Office escreva o que pretende, então salva o arquivo no DESKTOP e fecha o editor de texto. quando ele deseja abrir o arquivo salvo ele simplesmente clica no arquivo localizado no desktop e o editor é aberto. Porem quando ele salva ou copia qualquer arquivo para fora do desktop o Ubuntu não consegue identificar qual programa se deve usar, gerando o pequeno problema de sempre ter que selecionar qual o aplicativo dever ser aberto para abrir o arquivo desejado. Pergunto aos senhores: como gerencio os aplicativos que devam ser executados para os seus determinados arquivos. Ex.: jpg -- visualizador de imagens txt -- gedit odt -- open office obrigado... Daniel -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikjnuklvbp6a21c4fritcfqrnh+xccbusm0y...@mail.gmail.com
Re: Como identificar um modem
Sim, o modem 3G é daqui de casa. Nao moro como meu pai. Segui sua sugestao e aparentemente ele só me mostra o 3g que ja havia configurado a tempos. Agora que surgiu a necessidade de configurar uma linha discada.segue o resultado do wvdialconf, se alguem puder me ajudar agradeço, abraço maquina:/home/daniel# wvdialconf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. Modem Port Scan*1: S0 S1 S2 S3 ttyUSB0Info: Device or resource busy Modem Port Scan*1: USB0 WvModem*1: Cannot get information for serial port. ttyUSB1*1: ATQ0 V1 E1 -- OK ttyUSB1*1: ATQ0 V1 E1 Z -- OK ttyUSB1*1: ATQ0 V1 E1 S0=0 -- OK ttyUSB1*1: ATQ0 V1 E1 S0=0 C1 -- OK ttyUSB1*1: ATQ0 V1 E1 S0=0 C1 D2 -- OK ttyUSB1*1: ATQ0 V1 E1 S0=0 C1 D2 +FCLASS=0 -- OK ttyUSB1*1: Modem Identifier: ATI -- Manufacturer: huawei ttyUSB1*1: Speed 9600: AT -- OK ttyUSB1*1: Max speed is 9600; that should be safe. ttyUSB1*1: ATQ0 V1 E1 S0=0 C1 D2 +FCLASS=0 -- OK Found a modem on /dev/ttyUSB1. /etc/wvdial.confWarn: Ignoring malformed input line: ;Do NOT edit this file by hand! DAniel Em 7 de setembro de 2010 01:40, Helio Loureiro he...@loureiro.eng.brescreveu: Caros colegas, estou configurando uma máquina para meu pai e tenho que ajustar algumas coisas antes de passar pra ele. Uma delas é o modem para ele usar linha discada. [...] dan...@maquina:~$ lsusb Bus 005 Device 003: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Discada? Com um modem 3G? Bom... gosto não se discute. Instale wvdial e rode wvdialconf pra ver se o modem é reconhecido. []´s Helio Loureiro http://helio.loureiro.eng.br http://hloureiro.multiply.com http://twitter.com/helioloureiro
Re: Como determinar um programa para abrir um determinado arquivo?
Em Mon, 6 Sep 2010 22:42:04 -0300 Daniel Bianchi danielpbian...@gmail.com escreveu: Caros colegas, estou enfrentando um pequeno problema no computador do meu irmão, que usa Ubuntu. Suponhamos que ele abra o Open Office escreva o que pretende, então salva o arquivo no DESKTOP e fecha o editor de texto. quando ele deseja abrir o arquivo salvo ele simplesmente clica no arquivo localizado no desktop e o editor é aberto. Porem quando ele salva ou copia qualquer arquivo para fora do desktop o Ubuntu não consegue identificar qual programa se deve usar, gerando o pequeno problema de sempre ter que selecionar qual o aplicativo dever ser aberto para abrir o arquivo desejado. Pergunto aos senhores: como gerencio os aplicativos que devam ser executados para os seus determinados arquivos. Ex.: jpg -- visualizador de imagens txt -- gedit odt -- open office Abra o gerenciador de arquivos na pasta que você quiser, selecione o arquivo de seu interesse, clique com o botão direito e escolha Abrir com..., deve haver uma opção que diga mais ou menos o seguinte: usar como padrão para este tipo de arquivo, selecione-a e pronto (no xfce4, funciona). obrigado... abraço, -- ...agora, só nos sobrou o futuro..., visto em www.manuchao.net Gunther Furtado Curitiba - Paraná - Brasil gunfurt...@gmail.com -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100907023021.5cda3...@azul.gbcm
Re: gnome mounts all fstab entries
On Mon, 06 Sep 2010 00:35:42 +, T o n g wrote: Did you migrate from old sysvinit to any new booting system? I recently was asked to do it after a system update. I've been using file-rc for several years. Package: file-rc (...) So I don't know if this answer your question or not. Did you mean the parallel booting? What's the package name for that? I was referring to upstart or systemd, yep :-) And I asked because I've read some problems precisely with this, not so long ago, from Fedora devel list: systemd and filesystems with noauto http://lists.fedoraproject.org/pipermail/devel/2010-August/141367.html But maybe this has no connection with your issue :-? Have you considered to open a report at Debian BTS? It seems Ubuntu has already one opened: mount noauto not working https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/575620 Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.06.06.24...@gmail.com
Re: Unicode Character key-in problem
On Mon, 06 Sep 2010 10:58:22 +0530, Thomas Vazhappilly wrote: I am a migrant from MS Windoz to Gnu/Linux. Only one problem where I stuck is, I cannot key in some characters in UTF-8 such as CURRENCY SIGN as in typing MS Windoz. In MSW I can get the character by holding the alt key and type 0164 and on release the alt key, I get the CURRENCY SIGN in the editor. Is there a ditto input method in Debian Gnu/Linux system? Somebody help. Yes, it is called compose :-) If you are using GNOME, you're in luck: Currency sign → ¤ In GNOME, you can get it by pressing Ctrl+Shift+u and release the keys. You'll get an underline u. Then you have to type the desired characters sequence, i.e., for currency sign type 00a4 and press enter: http://www.hermit.org/Linux/ComposeKeys.html Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.06.06.45...@gmail.com
Re: sid: Console problems after starting X
On Fri, 3 Sep 2010 00:58:21 -1000 Joel Roth jo...@pobox.com wrote: [...] What video card/driver are you using? -- Rares Aioanei debian.dev.list -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100906101456.3089ea1d.debian.dev.l...@localhost.localdomain
How can I create a FAT32 or NTFS FS
Hi, I sometimes use gparted to make a filesystem in an easier way than using CLI. The fact is that gparted appears, to me, as a frontend for CLI commands. I want to format an USB key, and change the filesystem to fat32, or ntfs. It is currently under ext3. I unmount it, delete the FS, and manage to create a new partition. But `fat32' and `ntfs' are impossible choices when creating the new FS. (They are deactivated.) Why? Thanks. -- Merciadri Luca See http://www.student.montefiore.ulg.ac.be/~merciadri/ I use PGP. If there is an incompatibility problem with your mail client, please contact me. To live is the rarest thing in the world. Most people exist, that's all. (Oscar Wilde) signature.asc Description: OpenPGP digital signature
Re: How can I create a FAT32 or NTFS FS
On Lu, 06 sep 10, 09:25:25, Merciadri Luca wrote: Hi, I sometimes use gparted to make a filesystem in an easier way than using CLI. The fact is that gparted appears, to me, as a frontend for CLI commands. I want to format an USB key, and change the filesystem to fat32, or ntfs. It is currently under ext3. I unmount it, delete the FS, and manage to create a new partition. But `fat32' and `ntfs' are impossible choices when creating the new FS. (They are deactivated.) Why? You are probably missing the packages dosfstools and ntfsprogs. They are both 'Suggested' by gparted, but not 'Recommended' because most GNU/Linux users should not need them. Regards, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Re: Emergence: recover deleted files
Hey, Rodolfo Medina wrote at 2010-09-05 16:54 -0500: To avoid that risk, would it be all right, from within hda6, just cd to hda8 and there perform writes? Is the machine in question still booted and running with hda6 as /home? I would shutdown, use a liveCD, mount hda6 as ro, and hda8 as rw and do it from there. But if you cant do that, then I suppose it should be ok. I dont *think* shutting down will cause any problems, but I am not 100% sure. Excuse so many questions, but the issue is a major one. Thanks Rodolfo -- Regards, Angus Hedger Debian GNU/Linux User PGP Public Key 0xEE6A4B97 signature.asc Description: PGP signature
Fw: Fw: udev rules network
Hi Bob, Short answer: Remove the file and reboot. If missing it will be created based upon the current situation at boot time. By accident found out that is indeed how it works. I had deleted te old file bacuse it created more problems then it solved. ;-) After a reboot the file was indeed regererated. Bonno Bloksma -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4aadaca7472347448600dec8fc04e...@staf.tio.nl
Re: How can I create a FAT32 or NTFS FS
Andrei Popescu wrote: On Lu, 06 sep 10, 09:25:25, Merciadri Luca wrote: Hi, I sometimes use gparted to make a filesystem in an easier way than using CLI. The fact is that gparted appears, to me, as a frontend for CLI commands. I want to format an USB key, and change the filesystem to fat32, or ntfs. It is currently under ext3. I unmount it, delete the FS, and manage to create a new partition. But `fat32' and `ntfs' are impossible choices when creating the new FS. (They are deactivated.) Why? You are probably missing the packages dosfstools and ntfsprogs. They are both 'Suggested' by gparted, but not 'Recommended' because most GNU/Linux users should not need them. Exactly. It installs, among others, mkntfs. Well, I don't fiddle anymore with Microsoft stuff, but someone needs to share pictures with me, and, obviously, he's not a GNU/linux user. -- Merciadri Luca See http://www.student.montefiore.ulg.ac.be/~merciadri/ I use PGP. If there is an incompatibility problem with your mail client, please contact me. As soon as a man is born, he begins to die. signature.asc Description: OpenPGP digital signature
bashrc, bash_profile, /etc/skel/ - Debian Squeeze
Hi, I was tried Gentoo Linux system but after a while I come back to Debian GNU/Linux system again on my PC Box. So, in my /home/csanyipal/ directory there remain some dot files from Gentoo system, eg.: .bashrc, .bash_profile. When I installed 64bit Debian GNU/Linux Squeeze, I used my $HOME directory with it's dot files too. So, I think the .bashrc and .bash_profile remain in the state in which was on Gentoo. Now I have the empty /etc/skel/ directory! I try to reinstall bash, but still get not in my $HOME directory the debianized .bashrc and .bash_profile, and still the /etc/skel/ directory is empty. What should I reinstall to get the default /etc/skel/ directory? When 'ls' on my bash prompt, I get not colorized output too. How can I get the default BASH shell, with default .bashrc and .bash_profile again, and why is the /etc/skel/ directory empty? Any advices will be appreciated! -- Regards, Paul Chany You can freely correct me in my English. http://csanyi-pal.info -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/877hizuvej@debian-asztal.excito
Re: bashrc, bash_profile, /etc/skel/ - Debian Squeeze
¡Warning: bad english here! I guess the /etc/skel debian directory isn't actually empty: try ls --all /etc/skel You've to restore your fancy-console-files from a previous backup or browsing in gentoo svn to find the files (maybe some base-files or something) On Mon, Sep 6, 2010 at 10:29, Csanyi Pal csanyi...@gmail.com wrote: Hi, I was tried Gentoo Linux system but after a while I come back to Debian GNU/Linux system again on my PC Box. So, in my /home/csanyipal/ directory there remain some dot files from Gentoo system, eg.: .bashrc, .bash_profile. When I installed 64bit Debian GNU/Linux Squeeze, I used my $HOME directory with it's dot files too. So, I think the .bashrc and .bash_profile remain in the state in which was on Gentoo. Now I have the empty /etc/skel/ directory! I try to reinstall bash, but still get not in my $HOME directory the debianized .bashrc and .bash_profile, and still the /etc/skel/ directory is empty. What should I reinstall to get the default /etc/skel/ directory? When 'ls' on my bash prompt, I get not colorized output too. How can I get the default BASH shell, with default .bashrc and .bash_profile again, and why is the /etc/skel/ directory empty? Any advices will be appreciated! -- Regards, Paul Chany You can freely correct me in my English. http://csanyi-pal.info -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/877hizuvej@debian-asztal.excito
[OT] permissions on samba share
Dear all! I have some problem with permissions of files saved from a windows XP to a samba share. Some files from a proprietary software are saved with permissions -rwxrw 1 johannes tandem 4686 2010-09-06 11:24 BCK2000.DAT other data from the same software are saved with permissions -rw--w 1 tandem tandem 5870 2010-09-06 11:01 das-A040g-90deg-20VV.DAT I would ideally save all files with permissions -rw-rw. The directories of the files have the permissions drwxrws--- 2 johannes tandem 4096 2010-09-03 09:09 backup/ drwxrws--- 4 johannes tandem 69632 2010-09-06 11:03 pmma-film/ Is there any way that I am missing to force all files stored from that 'guest OS' to have -rw-rw ? Thanks for help! Cheers, Johannes -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c84b519.2000...@aktendiener.de
Re: bashrc, bash_profile, /etc/skel/ - Debian Squeeze
Csanyi Pal: When I installed 64bit Debian GNU/Linux Squeeze, I used my $HOME directory with it's dot files too. So, I think the .bashrc and .bash_profile remain in the state in which was on Gentoo. Yes, that's how it should be. Debian package managers must never touch anything under /home. Now I have the empty /etc/skel/ directory! Check with ls -la. I try to reinstall bash, but still get not in my $HOME directory the debianized .bashrc and .bash_profile, This is by design. Debian never overwrites user files. and still the /etc/skel/ directory is empty. What should I reinstall to get the default /etc/skel/ directory? What do you need that for? It is only used when you create new users. J. -- Driving behind lorries carrying hazardous chemicals makes me wish for a simpler life. [Agree] [Disagree] http://www.slowlydownward.com/NODATA/data_enter2.html signature.asc Description: Digital signature
Re: iomega 2TB external USB drive
I accidentally sent my reply to Celejar direct instead of to the list so I am reposting it to the group. If my 'dmseg' is too long -- sorry about that -- elejar wrote: On Sat, 04 Sep 2010 22:22:04 -0400 John Lindsay jcl...@sentex.net wrote: I just picked up an Iomega 2TB external USB drive. It is formatted NTSF. When plugged into my Win7 pc it is seen however it does not show up on screen under Debian (lenny). Is this drive supported? How can I get it seen by debian? You need to explain what you mean by show up on screen. What does dmesg / syslog say? Celejar Hi Celejar and Boyd I used synaptic to search for ntsf and installed it as it was unmarked. I am using gnome as a desktop. Celejar -- here is my dmesg -- first time I have used this -- I am making the assumption that the latest info is at the bottom of the list -- it looks like it is attached but I see no icon like I do when I plug in a memory stick. It does not show up when I click on 'computer' under places. John dmesg: 2086389.733663] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.733669] ide: failed opcode was: unknown [2086389.733672] hdc: drive not ready for command [2086389.733712] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.733719] ide: failed opcode was: unknown [2086389.733724] hdc: drive not ready for command [2086389.733766] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.733773] ide: failed opcode was: unknown [2086389.733778] hdc: drive not ready for command [2086389.733852] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.733859] ide: failed opcode was: unknown [2086389.733864] hdc: drive not ready for command [2086389.733968] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.733975] ide: failed opcode was: unknown [2086389.733982] hdc: drive not ready for command [2086389.734056] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.734064] ide: failed opcode was: unknown [2086389.734069] hdc: drive not ready for command [2086389.734211] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.734219] ide: failed opcode was: unknown [2086389.734225] hdc: drive not ready for command [2086389.734580] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.734588] ide: failed opcode was: unknown [2086389.734597] hdc: drive not ready for command [2086389.734732] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.734740] ide: failed opcode was: unknown [2086389.734744] hdc: drive not ready for command [2086389.771899] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.771907] ide: failed opcode was: unknown [2086389.771912] hdc: drive not ready for command [2086389.771941] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.771945] ide: failed opcode was: unknown [2086389.771948] hdc: drive not ready for command [2086389.771976] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.771981] ide: failed opcode was: unknown [2086389.771984] hdc: drive not ready for command [2086389.772011] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.772016] ide: failed opcode was: unknown [2086389.772019] hdc: drive not ready for command [2086389.772022] hdc: weird block size 0 [2086389.772024] hdc: default to 2kb block size [2086389.772051] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.772056] ide: failed opcode was: unknown [2086389.772058] hdc: drive not ready for command [2086389.772086] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.772090] ide: failed opcode was: unknown [2086389.772093] hdc: drive not ready for command [2086389.772121] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.772125] ide: failed opcode was: unknown [2086389.772128] hdc: drive not ready for command [2086389.772156] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.772161] ide: failed opcode was: unknown [2086389.772164] hdc: drive not ready for command [2086389.772191] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.772196] ide: failed opcode was: unknown [2086389.772199] hdc: drive not ready for command [2086389.772227] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.772232] ide: failed opcode was: unknown [2086389.772235] hdc: drive not ready for command [2086389.772262] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } [2086389.772267] ide: failed opcode was: unknown [2086389.772270] hdc: drive not ready for command [2086389.772298] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Re: bashrc, bash_profile, /etc/skel/ - Debian Squeeze
Pier Paolo pierpaolo.fra...@gmail.com writes: I guess the /etc/skel debian directory isn't actually empty: try ls --all /etc/skel Uh, yes, of course!! You've to restore your fancy-console-files from a previous backup or browsing in gentoo svn to find the files (maybe some base-files or something) After I copy .bashrc and .profile to my $HOME directory, and setup owner for these files to be owned by user: by me, everything back to the normal. Thanks! OK, I edited these files and add some lines there, like: EDITOR=emacsclient; export EDITOR -- Regards, Paul Chany http://www.debian.org http://wiki.debian.org/DebianEdu http://csanyi-pal.info -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/87eid7dvhc@debian-asztal.excito
Re: iomega 2TB external USB drive
I did it again; sending a reply to the sender rather than the group -- hopefully I will be more careful in future -- Bob Proulx wrote: John Lindsay wrote: I just picked up an Iomega 2TB external USB drive. It is formatted NTSF. When plugged into my Win7 pc it is seen however it does not show up on screen under Debian (lenny). Is this drive supported? How can I get it seen by debian? You need to be more specific in your question. Seen is such a terrible word in a technical sense. For me that would mean that the kernel's usb module detected it and logged it to /var/log/syslog. Please look at the activity in /var/log/syslog and report what is happening when you insert or remove the usb device. You're right. Seen is a terrible 'technical' word. I should have said 'no drive icon appears as it does when I install a 32g memory stick'. But I imagine that you are using a GNOME desktop environment (or a KDE desktop environment) and no icon is appearing on your desktop after plugging it in? Is that what is happening for you? Unfortunately with those it all depends upon what packages you have installed. (Personally I despise those types of happy extras and disable them on my machine so I won't be much help for you but at least it will identify the problem.) It doesn't mean that your machine isn't seeing the usb device. Do you have gnome-mount installed? $ dpkg -l gnome-mount This is what shows up when I 'dpkg -l gnome-mount'. It looks like it is installed. Whether that is the latest version or not -- haven't check that out yet. Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name VersionDescription +++-==-==- ii gnome-mount0.7-2 wrapper for (un)mounting and ejecting storag ve3...@tux-net:~$ Summary: Both *before* and *after* inserting the usb device: $ cat /proc/partitions This is with the drive disconnected major minor #blocks name 3 0 78125000 hda 3 1 75473338 hda1 3 22650725 hda2 364 120060864 hdb This is with the drive connected--- major minor #blocks name 3 0 78125000 hda 3 1 75473338 hda1 3 22650725 hda2 364 120060864 hdb 8 0 1953514584 sda 8 1 1953512001 sda1 So it is there. I just cannot see an icon or access the drive. I don't know much about accessing drives from the command line and what little I know gets me into a lot of 'trouble' especially if I screw up the email (which I have done in the past and 'she who must be obeyed' was not to impressed!!! $ less /var/log/syslog Observing any differences will be clues to what is happening. Bob I did the last statement and there is way too much information for my ancient brain to make heads or tales over!!! What information am I looking for in this syslog? Is it at the beginning or end? John -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c84c1d1.9020...@sentex.net
Re: Re (2): Linux hub
In 4c847f8a.3060...@hardwarefreak.com, Stan Hoeppner wrote: Layer 2 ethernet switches, the bulk of all sold to date, don't have any knowledge of packets. They don't store information about seen packets. Packets exist at layer 3 in OSI. Sorry, I was overusing the term packet. I was not referring to an IP packet. I was referring to an Ethernet frame. It's still packet-ized data, rather than something like a TCP stream. Switches are quite aware of Ethernet frames. I've even uttered the the phrase Ethernet packet and most people understood what I meant, even though no such animal actually exists. I own a switch (actually, it is a roommate's) that operates at layers 2 and 3, does QOS, Vlans, STP, etc. It does not handle true routing, as all this configuration is either static or based on recently seen related packets. It doesn't understand BGP, OSPF, or any of the other routing protocols. Processing and possibly emitting data from one of the routing protocols is the main requirement to call something a router in my mind. Anything less is just a switch. Some of them are quite smart; others are relatively dumb. But, they are still smart devices when compared to a hub, cable, repeater, or other device that operates with no internal state. -- Boyd Stephen Smith Jr. ,= ,-_-. =. b...@iguanasuicide.net ((_/)o o(\_)) ICQ: 514984 YM/AIM: DaTwinkDaddy `-'(. .)`-' http://iguanasuicide.net/\_/ signature.asc Description: This is a digitally signed message part.
Re: [OT] permissions on samba share
On Mon, 06 Sep 2010 11:32:09 +0200, Johannes Wiedersich wrote: I have some problem with permissions of files saved from a windows XP to a samba share. Some files from a proprietary software are saved with permissions (...) Is there any way that I am missing to force all files stored from that 'guest OS' to have -rw-rw ? Have you tried by setting create mask¹ value for the share? ¹ http://www.samba.org/samba/docs/man/manpages-3/smb.conf.5.html#CREATEMASK Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.06.11.35...@gmail.com
Re: Emergence: recover deleted files
On Mon, 06 Sep 2010, Rodolfo Medina wrote: ...And: suppose I had only partition hda6 on the hard disk: even using a live CD, as suggested by other listers, where could recovered file have been stored, since we don't want to write on hda6? You'd have to get another place to store the files - another disk, a pendrive, etc. -- Boys are beyond the range of anybody's sure understanding, at least when they are between the ages of 18 months and 90 years. -- James Thurber Eduardo M KALINOWSKI edua...@kalinowski.com.br -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100906085909.43972aqq1am37...@mail.kalinowski.com.br
Re: Emergence: recover deleted files
On Mon, 06 Sep 2010, Rodolfo Medina wrote: To avoid that risk, would it be all right, from within hda6, just cd to hda8 and there perform writes? It doesn't really matter from where you run the program, only where it writes to. And you must only write to another disk. That said, it is better if you unmount the partition with deleted files, or at least remount it read-only. If it is busy, stop the processes that have open files in it (see lsof and fuser programs). While it may cause writes to the system, it's better that simply pull the power cord and risk file system corruption. And if programs are running, they might be writing files. If it's the root partition, you'll need to reboot in another system, either from a CD (easiest way) or another system in your HD, if you have one. Excuse so many questions, but the issue is a major one. If it's major, why so much resistance in following the advice that has been given? First, it seems you haven't yet unmounted the partition where files were deleted, even after some 24 hours of the problem. That should have been the first thing to do. The easiest way to do that is turn off the system. (While not strictly necessary - the important bit is to unmount the partition with deleted files, since you'll be doing a reboot, it doesn't matter.) Download and burn a live CD, if necessary using another computer. If it already has the recovery program, it is easier, if not, select one that allows installing new packages from the live system (Ubuntu does, packages go in RAM filesystem.) Run the recovery program from the live CD on the partition. It may be that the program requires the partition to be unmounted, if not, and you must mount it, mount it as read-only. Let it run, and store the results somewhere else - another partition, another drive, pen drive, in another computer (via network, etc.) -- Don't know what time I'll be back, Mom. Probably soon after she throws me out. Eduardo M KALINOWSKI edua...@kalinowski.com.br -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100906091114.16674dy8w545a...@mail.kalinowski.com.br
Re: [OT] permissions on samba share
Camaleón wrote: On Mon, 06 Sep 2010 11:32:09 +0200, Johannes Wiedersich wrote: I have some problem with permissions of files saved from a windows XP to a samba share. Some files from a proprietary software are saved with permissions (...) Is there any way that I am missing to force all files stored from that 'guest OS' to have -rw-rw ? Have you tried by setting create mask¹ value for the share? ¹ http://www.samba.org/samba/docs/man/manpages-3/smb.conf.5.html#CREATEMASK Yes, plus the 'force create mode'. The relevant part of my smb.conf is /== [winshare] comment = xxx path = /home/projekte valid users = xxx, read only = No create mask = 0664 force create mode = 0660 directory mask = 0770 force directory mode = 0770 \== Greetings, Johannes -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c84dfad.5050...@aktendiener.de
Re: [OT] permissions on samba share
On Mon, 06 Sep 2010 14:33:49 +0200, Johannes Wiedersich wrote: Camaleón wrote: Have you tried by setting create mask¹ value for the share? ¹ http://www.samba.org/samba/docs/man/manpages-3/ smb.conf.5.html#CREATEMASK Yes, plus the 'force create mode'. The relevant part of my smb.conf is /== [winshare] comment = xxx path = /home/projekte valid users = xxx, read only = No create mask = 0664 force create mode = 0660 directory mask = 0770 force directory mode = 0770 \== Try adding write list and force group directives to the share and see if that helps. Also, look at the [global] section to check there is no value overriding/ conflicting with the [winshare] settings :-? Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.06.13.06...@gmail.com
Re: .xsession kills X server with sqeeze/fluxbox
Javier Vasquez j.e.vasque...@gmail.com writes: It sounds to me it's not a ~/.xsession issue. Have you tried just loading X without window manager at all, to see if it dies? If so it might be a xorg.conf problem or some other configuration... Something just occured to me. Please excuse a bit of senility and the distraction of other pressing work, but I now believe I recall having initially created an .xsession file and putting into it these statements: xset s 3600 xset -dpms When I found the time too short, I added a 0, and it did take longer to blank, but then seemed to revert to a shorter time by itself. So, if my memory serves, the .xsession file didn't initially kill the xserver, but my fidding with xset statements may have done damange. When I lost the X sessions altogether, I removed those lines. I now try to restore them in .xsession, but it doesn't help. Going back to elaborate the initial scenario, when I first installed squeeze, I de-selected the Graphical Desktop Environment bundle of packages, for I startx from command line and never install a graphical desktop environment such as KDE. Then, After some preliminaries, I installed xorg and tested it by doing $ startx, and got the expected graphical mode (blank screen with graphical prompt (?) in UL corner). I then installed fluxbox, and much to my surprise, it was started automatically by the X server call. That is, for years I've started the window manager by putting a statement in .xsession such as: exec fluxbox || exec xterm -fg red So I no longer know how fluxbox gets called and how to stop it to carry out your test. I looked into /etc/X11/ and off-hand couldn't find a call for fluxbox, although there's a fluxbox directory to define its default behavior. So I no longer know how to stop fluxbox except by terminating its process, which will do me no good because fluxbox is recalled when I start the X server. I did check root account behavior: I logged in as root and for first time started X for it. I found again that fluxbox starts automatically when I startx. I created an empty .xsession file, and when that file exists, the X server gives up the ghost without any suicide note. That is, each time I try to start X and it fails because of the presence of the .xsession file, it only shows up in .xsession-errors as: Xsession: X session started for ... However, there nothing like: $ ps aux | grep X brownh 3928 0.0 0.0 2864 808 tty1 S+ Sep02 0:00 xinit /etc/X11/xinit/xinitrc -- /etc/X11/xinit/xserverrc :0 -auth /tmp/serverauth.bkLgHxoJbD so apparently the server is not running despite what Xsession says. There's nothing relevant in user.log or syslog. I did an call trace: $ strace -o xsession-trace startx The enormous result was beyond my ken, but for whatever its worth, it ends like this: ... stat64(/bin/rm, ...) = 0 clone(child_stack=0 ...) = 3303 wait4(-1 ...) = 3303 exit_group(0) = ? Ps-aux does not say there's any process 3303 still running. Haines -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/87lj7f81g9@teufel.historicalmaterialism.info
Re: iomega 2TB external USB drive
On Mon, 06 Sep 2010 06:26:25 -0400 John Lindsay jcl...@sentex.net wrote: ... Summary: Both *before* and *after* inserting the usb device: $ cat /proc/partitions This is with the drive disconnected major minor #blocks name 3 0 78125000 hda 3 1 75473338 hda1 3 22650725 hda2 364 120060864 hdb This is with the drive connected--- major minor #blocks name 3 0 78125000 hda 3 1 75473338 hda1 3 22650725 hda2 364 120060864 hdb 8 0 1953514584 sda 8 1 1953512001 sda1 So it is there. I just cannot see an icon or access the drive. I don't Yes, it's there. sda is the drive, and sda1 is a partition on it. At this point, dmesg and syslog won't be as much use, since the kernel knows about the drive, and the problem is with the higher level tools. I don't use those tools, so I won't really be able to help; perhaps someone else will. know much about accessing drives from the command line and what little I know gets me into a lot of 'trouble' especially if I screw up the email (which I have done in the past and 'she who must be obeyed' was not to impressed!!! It's really just a matter of 'mount /dev/sda1 /mnt' (as root). See if it works, and if not, report the errors (and syslog may help here). $ less /var/log/syslog Observing any differences will be clues to what is happening. Bob I did the last statement and there is way too much information for my ancient brain to make heads or tales over!!! What information am I looking for in this syslog? Is it at the beginning or end? The end. In linux, log messages are generally appended to the ends of files. What one generally does here is watch syslog, like so (from a console): 'tail -F /var/log/syslog' This will print the new lines to the screen as they are added to the file. So you start the 'tail' command, then do the 'mount' or whatever, and note what gets added. Celejar -- foffl.sourceforge.net - Feeds OFFLine, an offline RSS/Atom aggregator mailmin.sourceforge.net - remote access via secure (OpenPGP) email ssuds.sourceforge.net - A Simple Sudoku Solver and Generator -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100906091241.1fab067b.cele...@gmail.com
Re: uPnP state in debian ?
answering myself: http://www.queret.net/blog/post/2009/05/15/FreeBox-UPnP-AV-%3A-Installation-de-MediaTomb-sous-Debian/Ubuntu apt-get install mediatomb :) On Sun, Sep 5, 2010 at 2:38 PM, Mathieu Malaterre mathieu.malate...@gmail.com wrote: Hi, I would like to know if anyone has setup a uPnP server on a debian box ? I am looking at the following ITP: #469397 #450520 but it seems they have not been integrated in debian AFAIK Thx -- Mathieu -- Mathieu -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlkti=hqlxyfwg_vqn+vukvh+vmsrzv-bsb+jdz=...@mail.gmail.com
Re: Can start X once but no more
On Sun, 05 Sep 2010 20:08:14 -0400 (EDT), Tong mlist4sunt...@yahoo.com wrote: On Sun, 05 Sep 2010 17:41:34 -0400, Stephen Powell wrote: I also use the nv driver, and I can start the X server multiple times, but usually not without manual intervention. What usually happens is that the old session only partially dies. The new session tries to grab vt 7, but finds it unavailable for allocation; so it allocates vt 8. If I switch to a text console with, say, Ctrl+Alt+F1, then if I attempt to switch back to X with Alt+F7, I see a black screen. But if I use Alt+F8 instead, I get back to X. Multiple restarts can force the use of higher numbered vts. YES! that's *exactly* the symptom that I'm experiencing. I have to jump through some hoops to get the X server back on vt 7. I usually just reboot because it's easier, but it is possible to do it without rebooting. I don't mind jumping through some hoops to get the X to start at VT 7. I want to avoid rebooting as much as possible. How were you able to do that? I run GNOME, so this technique may not work for you or may need to be adapted. But here's what I do: (1) I click on System - Logout from the GNOME action bar. The logout completes, and the gdm daemon restarts, but not necessarily on vt7. (2) I switch to text console number 1 via Ctrl+Alt+F1, then attempt to switch back to X via Alt+F7. If I see a black screen, I know it restarted on the wrong vt. I don't know which one yet, but I know it's not vt7. (3) If I get a black screen in step 2, I switch back to text console number 1 via Alt+F1. (Note: the Ctrl key is not needed here, since X is not running on vt7!) (4) On text console number 1, I login as root. I find the console-kit-daemon process via ps aux|grep console-kit-daemon Sample output looks something like this: smp3:~# ps aux|grep console-kit-daemon root 1609 0.0 0.6 17424 3116 ?Sl Sep05 0:00 /usr/sbin/console-kit-daemon --no-daemon root 4274 0.0 0.1 3796 780 pts/0S+ 09:51 0:00 grep console-kit-daemon smp3:~# I obtain the process id from the output of the above command, in this case 1609, and use it in the kill command: kill 1609 I can then deallocate vt 7 with deallocvt 7 I find that the deallocvt 7 command fails unless I kill console-kit-daemon first. I also find which vt gdm started on via ps aux|grep gdm Typical output might look something like this: smp3:~# ps aux|grep gdm root 1080 0.0 0.4 16100 2072 ?Ss Sep05 0:00 /usr/sbin/gdm root 1087 0.0 0.6 16412 3252 ?SSep05 0:10 /usr/sbin/gdm root 1094 0.7 6.6 41044 34180 tty7 Ss+ Sep05 10:40 /usr/bin/X :0 -audit 0 -auth /var/lib/gdm/:0.Xauth -nolisten tcp vt8 root 4294 0.0 0.1 3796 780 pts/0S+ 10:03 0:00 grep gdm smp3:~# The above output shows it started on vt 8. I keep that in mind for later. Then I restart gdm with /etc/init.d/gdm restart The X server restarts on vt 7. When the restart occurs, the active vt automatically switches to vt 7 and I see the gdm login screen. I switch back to text console number 1 with Ctrl+Alt+F1, and repeat the process of finding and killing the console-kit-daemon process and deallocating vt 8 (or whatever vt it was on before). I then logout of my root session on vt 1. I then switch back to vt 7 via Alt+F7 and login. Note: it is important not to switch back to X between killing console-kit-daemon and deallocating the vt. For this procedure I owe someone else on this list who helped me months ago, but I don't remember who it was. But thanks again to you, sir, though I don't remember your name. This is clearly a bug. I shouldn't have to do this. The question is, against what Debian package do I report the bug? My first thought was against xserver-xorg-video-nv, but I have seen these symptoms (though less often) with other video drivers, such as intel. Perhaps console-kit is the right package, since it owns the executable whose process must be killed in order to deallocate the vt. If this process, or an adaptation thereof, works for you, you may be able to circumvent it by issuing (as root) mv /usr/sbin/console-kit-daemon /usr/sbin/console-kit-daemon.disabled killall console-kit-daemon But I don't know what other ramifications this might have; so I can't recommend it at this time. -- .''`. Stephen Powell : :' : `. `'` `- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/818893726.634530.1283784124294.javamail.r...@md01.wow.synacor.com
Re: Backing up email to a CD
If the tool you are looking for is to do a mirror of all the mails from IMAP erver to your local disk, then, toy can look at this http://freshmeat.net/projects/imapsync/ This will create a copy of the complete mails in all your folders in the imap server to your disk so that you can later copy them into a DVD with the burner of your choice (i particularly like mkisofs and growisofs/cdrecord appropriately) In case it is pop, then it is easy. Use the mail folders present in the client machine which will contain all the mails. On Sat, 4 Sep 2010, James Stuckey wrote: Hi, I asked a question a week or so ago about backing up e-mail. What I meant was that I wanted to back it up to a CD. The responses I got talked about backing it up to an IMAP server. Does anyone know how to back it up to a CD? Bhasker C V Registered linux user #306349 Fedora Ambassador: Bhaslinux -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/alpine.deb.2.00.1009061640260.15...@server.uk.unixindia.com
Re: Backing up email to a CD
Thanks for the reply! I understand what imapsync does, but I don't know how to use it. Everyone has told me to use it, but no one has told me how. I don't have another server to sync these to, so the tutorial someone linked doesn't help me. I tried the man page but (in testing) it's not any help. The only access I have to this email account as of now is via http://webmail.dreamhost.com/src/login.php or at least that's what dreamhost tech-support told me. I have a half-dozen or so accounts hosted with them, and I'd like to somehow take all that mail from those accounts and dump it to a CD so that if I want to in the future, I could read through it/etc. ciao James S. On Mon, Sep 6, 2010 at 5:43 PM, Bhasker C V bhas...@unixindia.com wrote: If the tool you are looking for is to do a mirror of all the mails from IMAP erver to your local disk, then, toy can look at this http://freshmeat.net/projects/imapsync/ This will create a copy of the complete mails in all your folders in the imap server to your disk so that you can later copy them into a DVD with the burner of your choice (i particularly like mkisofs and growisofs/cdrecord appropriately) In case it is pop, then it is easy. Use the mail folders present in the client machine which will contain all the mails. On Sat, 4 Sep 2010, James Stuckey wrote: Hi, I asked a question a week or so ago about backing up e-mail. What I meant was that I wanted to back it up to a CD. The responses I got talked about backing it up to an IMAP server. Does anyone know how to back it up to a CD? Bhasker C V Registered linux user #306349 Fedora Ambassador: Bhaslinux
Re: .xsession kills X server with sqeeze/fluxbox
On 9/6/10, brownh bro...@historicalmaterialism.info wrote: Javier Vasquez j.e.vasque...@gmail.com writes: ... ... installed xorg and tested it by doing $ startx, and got the expected graphical mode (blank screen with graphical prompt (?) in UL corner). I then installed fluxbox, and much to my surprise, it was started automatically by the X server call. That is, for years I've started the window manager by putting a statement in .xsession such as: exec fluxbox || exec xterm -fg red So I no longer know how fluxbox gets called and how to stop it to carry out your test. That's because of: /etc/X11/Xsession.d/50x11-common_determine-startup /etc/alternatives/x-window-manager /usr/bin/x-window-manager When you have no other window manager than fluxbox, then your alternative by default is fluxbox, then that's called for you. When you control things by using ~/.xinitrc (for me ~/.xsession is just a link to ~/.xinitrc, but then ~/.xinitrc needs execute permissions), then the alternative doesn't matter, it's what you put in there what gets executed by startx, or in the case of ~/.xsession, by the session manager (xdm/gdm/kdm/wdm/...). I looked into /etc/X11/ and off-hand couldn't find a call for fluxbox, although there's a fluxbox directory to define its default behavior. So I no longer know how to stop fluxbox except by terminating its process, which will do me no good because fluxbox is recalled when I start the X server. I don't know what you're trying to attempt. Again, if you use startx, and have ~/.xinitrc, then it's what you have in there what get called. I you used a session manager (like xdm), and you have ~/.xession then it's what's there in ~/.xsession what gets called. That's why I don't have 2 configuration files, I just have ~/.xinitrc and then ~/.xession is just a link to it, but that implies giving execute permissions to ~/.xinitrc. Beyond that, you fluxbox menu have entries to exit fluxbox (kill it), load different window managers, reload it, etc... I did check root account behavior: I logged in as root and for first time started X for it. I found again that fluxbox starts automatically when I startx. I created an empty .xsession file, and when that file exists, the X server gives up the ghost without any suicide note. Can you try the following? As you already have ~/.xsession, make sure it has execute permissions. Then make a link to it naming such link ~/.xinitrc. Once you have that, if it's empty, then I would expect X to just die, since there's NO window manager specified. At the end of ~/.xsession, you now need to specify the window manger you want to run. In my case startfluxbox, you could call fluxbox directly as well, or any other thing such as startkde, gnome-session, or any other thing... In absence of ~/.xsession, you'll get the alternative when calling a session manager such xdm, and in presence of ~/.xsession then the session manger will pay attention to ~/.xsession (they do not pay attention to ~/.xinitrc), and if you use instead startx, it pays attention to ~/.xinitrc. If you don't include a window manger or desktop manager in your ~/.xinitrc or ~/.xession, and you're meant to use it, then X will just die... -- Javier. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktimd1yc68wbkjn0snc78cevposdz-o2xczw7o...@mail.gmail.com
Re: Backing up email to a CD
2010/9/6 James Stuckey jhstuc...@gmail.com: Thanks for the reply! I understand what imapsync does, but I don't know how to use it. Everyone has told me to use it, but no one has told me how. I don't have another server to sync these to, so the tutorial someone linked doesn't help me. I tried the man page but (in testing) it's not any help. The only access I have to this email account as of now is via http://webmail.dreamhost.com/src/login.php or at least that's what dreamhost tech-support told me. I have a half-dozen or so accounts hosted with them, and I'd like to somehow take all that mail from those accounts and dump it to a CD so that if I want to in the future, I could read through it/etc. I think dreamhost also offers mail via imap. You can easily setup local imap server on debian machine by installing dovecot and then just imapsync from dreamhost to localhost. remember to use maildir format on dovecot.. -- Eero -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlkti=llkwcc32fgqw3akrqoaa0axs0w9jejhk0f...@mail.gmail.com
Re: Backing up email to a CD
On Mon, 06 Sep 2010, James Stuckey wrote: The only access I have to this email account as of now is via http://webmail.dreamhost.com/src/login.php or at least that's what dreamhost tech-support told me. I have a half-dozen or so accounts hosted with them, and I'd like to somehow take all that mail from those accounts and dump it to a CD so that if I want to in the future, I could read through it/etc. If you don't have IMAP access (or even POP3, it could work for retrieving emails), then see if the web interface has some kind of export feature. If not, then you're out of luck. You'd need to contact the support staff of that email provider and see if they can do anything, or resort to hacks (such as forwarding emails somewhere else). -- A triangle which has an angle of 135 degrees is called an obscene triangle. Eduardo M KALINOWSKI edua...@kalinowski.com.br -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100906130211.16845kgnvhzff...@mail.kalinowski.com.br
Release: A Solidariedade Toca Aqui...
Prezados, Encaminho um release para leitura e eventual publicação. Após publicação em seu veículo, avise-nos, para que possamos coloca-los na seção de imprensa, e divulgar o seu apoio em nosso twitter. envie o link da publicação para agencia_noticias_netw...@hotmail.com Atenciosamente, Bárbara Ferraz Agência de Notícias do Terceiro Setor A Solidariedade Toca Aqui... Portal GloboRadio e Planeta Voluntários iniciam parceria virtual O Portal GloboRadio criou uma rádio exclusiva para o site planeta voluntários com músicas de artistas engajados ou com mensagens por um mundo melhor. Na lista estão U2, Gilberto Gil, Michael Jackson entre outros artistas. O objetivo é criar uma trilha sonora temática para quem navega no site entrar no clima das causas sociais. O banner do Portal também vai ter um destaque especial no planeta voluntários e vice-versa. O Portal GloboRádio reúne as rádios tradicionais Beat98, CBN, BHfm e Rádio Globo, além de outras 40 emissoras temáticas e as online Multishow FM, Globo FM, Rádio GNT e Rádio Zona de Impacto. Assim, os internautas acessam notícias, especiais musicais, promoções e interagem com as emissoras pelas redes sociais. O Planeta Voluntários é um site não governamental, apartidário e ecumênico, criada em maio de 2009 por iniciativa do empresário Marcio Demari, da empresa Demari Ferreira, sediada em Londrina, Paraná, no Brasil, com a visão de desenvolver a cultura do trabalho voluntário organizado, que levará o serviço voluntariado a auxiliar milhões de brasileiros e entidades que necessitam de todo tipo de ajuda;a missão é a de conectar pessoas, que, através da transformação pessoal e social, destinam-se a construir uma solução justa, pacífica e sustentável para o mundo, refletindo a unidade de toda a humanidade. O site conta com uma Rede Social que cruza as informações dos voluntários com as instituições cadastradas, sendo um elo entre elas. PLANETA VOLUNTÁRIOS Porque ajudar faz bem ! A maior Rede Social de Voluntários e ONGs do Brasil
Re: Backing up email to a CD
2010/9/6 Eduardo M KALINOWSKI edua...@kalinowski.com.br: On Mon, 06 Sep 2010, James Stuckey wrote: The only access I have to this email account as of now is via http://webmail.dreamhost.com/src/login.php or at least that's what dreamhost tech-support told me. I have a half-dozen or so accounts hosted with them, and I'd like to somehow take all that mail from those accounts and dump it to a CD so that if I want to in the future, I could read through it/etc. If you don't have IMAP access (or even POP3, it could work for retrieving emails), then see if the web interface has some kind of export feature. If not, then you're out of luck. You'd need to contact the support staff of that email provider and see if they can do anything, or resort to hacks (such as forwarding emails somewhere else). Dreamhost supports imap: http://blog.dreamhosters.com/kbase/index.cgi?area=357 -- Eero -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikaakudu8qrwa2sjtkemw=f8udwi=hsaafw7...@mail.gmail.com
Re: Unicode Character key-in problem
On Mon, Sep 06, 2010 at 10:58:22AM +0530, Thomas Vazhappilly wrote: Hi..! I am a migrant from MS Windoz to Gnu/Linux. Only one problem where I stuck is, I cannot key in some characters in UTF-8 such as CURRENCY SIGN as in typing MS Windoz. In MSW I can get the character by holding the alt key and type 0164 and on release the alt key, I get the CURRENCY SIGN in the editor. Is there a ditto input method in Debian Gnu/Linux system? Somebody help. Thanks in advance. Currency sign may be done just by simple compose with binary code trick. But if you wish to type any indic fancy text, I recommend you to look into ibus or SCIM tool chain which provide GUI input method. http://www.debian.org/doc/manuals/debian-reference/ch08.en.html#_the_input_method_support_with_ibus Osamu -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100906163101.ga17...@debian.org
Re: Backing up email to a CD
Thanks for all the replies guys. I asked dreamhost and they have a service for backing up e-mail. It took me a while to figure out where the mails actually were after I got it downloaded but they're all there. Now I can burn it to a cd! On Mon, Sep 6, 2010 at 6:23 PM, Eero Volotinen eero.voloti...@iki.fiwrote: 2010/9/6 Eduardo M KALINOWSKI edua...@kalinowski.com.br: On Mon, 06 Sep 2010, James Stuckey wrote: The only access I have to this email account as of now is via http://webmail.dreamhost.com/src/login.php or at least that's what dreamhost tech-support told me. I have a half-dozen or so accounts hosted with them, and I'd like to somehow take all that mail from those accounts and dump it to a CD so that if I want to in the future, I could read through it/etc. If you don't have IMAP access (or even POP3, it could work for retrieving emails), then see if the web interface has some kind of export feature. If not, then you're out of luck. You'd need to contact the support staff of that email provider and see if they can do anything, or resort to hacks (such as forwarding emails somewhere else). Dreamhost supports imap: http://blog.dreamhosters.com/kbase/index.cgi?area=357 -- Eero -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikaakudu8qrwa2sjtkemw=f8udwi=hsaafw7...@mail.gmail.com
Re: Upgrade of squeeze hangs on apt (0.7.26~exp3)
Boyd Stephen Smith Jr. wrote: In 87tym48l1e@teufel.historicalmaterialism.info, brownh wrote: With a brand new installation of squeeze, one of my first steps was to do a package update and a safe-upgrade. The former went well, but when I tried to upgrade the 22 updated packages, the upgrade proceedure terminated with: Reading changelogs ... done apt (0.7.26~exp3) experimental; urgency=low * apt-ftparchive now reads the standard configuration files in /etc/apt/apt.conf and /etc/apt/apt.conf.d and after some more lines ends with /tmp/tmp (END) Sounds like your have apt-listchanges installed, and it is showing you the new Changelog entries. These are longer than one screen, so it has written them to a temporary file and is displaying them via less. q should quit less. Most likely apt-listchanges uses $PAGER, so if you are setting this variable to a command other than less, check the documentation for that command. On Squeeze it now looks like apt-listchanges is a default install, I removed it and aptitude is trying to install it again, we'll probably be seeing a lot of WTF questions. -- Jimmy Johnson Ubuntu Lucid and Trinity KDE 3.5.11 - EXT4 at sda10 Registered Linux User #380263 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c852561.7060...@gmail.com
Re: Upgrade of squeeze hangs on apt (0.7.26~exp3)
On Lu, 06 sep 10, 10:31:13, Jimmy Johnson wrote: On Squeeze it now looks like apt-listchanges is a default install, I removed it and aptitude is trying to install it again, we'll probably be seeing a lot of WTF questions. $ apt-cache rdepends apt-listchanges apt-listchanges Reverse Depends: apticron kolab-cyrus-common education-common cyrus-common-2.2 apticron amavisd-new education-common cyrus-common-2.2 apticron amavisd-new cyrus-common-2.3 (I have stable, testing and unstable in sources.list...) Do you have any of those packages? You might also want to try 'aptitude why apt-listchanges'. Regards, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Re: .xsession kills X server with sqeeze/fluxbox
Javier Vasquez j.e.vasque...@gmail.com writes: Can you try the following? As you already have ~/.xsession, make sure it has execute permissions. Then make a link to it naming such link ~/.xinitrc. Once you have that, if it's empty, then I would expect X to just die, since there's NO window manager specified. At the end of ~/.xsession, you now need to specify the window manger you want to run. In my case startfluxbox, you could call fluxbox directly as well, or any other thing such as startkde, gnome-session, or any other thing... Yes, now fluxbox starts OK with the .xsession file command. In retrospect, it all makes sense. Startx looks for .xsession, and finding it executes the window manager specified in it, but not finding the file executes the default window manager. However, if there is an .xsession file, but without any exec windowmanager statement at its end, the X server falls through the cracks. I had assumed it looked for a statement in the file, not for the file itself I now removed the executable permissions from .xsession, killed the symlink, and it still works. I'm not clear why you asked me to take these two steps unless it merely served to cover other possibilities for the test. Looks like I'm now all set. Thanks! Haines -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/87aanu92fy@teufel.historicalmaterialism.info
Re: No ALSA on 2.6.32-5
On Sunday 05 September 2010 22:57:22 debian-user-digest- requ...@lists.debian.org wrote: ALSA sound is not working after booting stock linux-image 2.6.32-5 (i386 from Do you get any errors from sound playing software or just no output. Did you try some console players (like asound or speaker-test) Sid). Get error like the following trying to manually modprobe any of the drivers: This should not be necessary [snip out of context errors] Fix? Would you mind sharing with us the type of sound card installed in that system? lspci at least ;) Output of 'cat /proc/asound/cards' would also be nice. There is an ens1371, the MBs intel sound, and an mpu401 device. There is NO /proc/asound/cards That is the whole point. In the past, I had compiled one of the snd_seq modules into the kernel to solve this. Using a stock Debian kernel and initrd, I hae no ALSA. Nada. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009062053.43977.d_ba...@012.net.il
Re: Upgrade of squeeze hangs on apt (0.7.26~exp3)
On 2010-09-06 19:40 +0200, Andrei Popescu wrote: On Lu, 06 sep 10, 10:31:13, Jimmy Johnson wrote: On Squeeze it now looks like apt-listchanges is a default install, I removed it and aptitude is trying to install it again, we'll probably be seeing a lot of WTF questions. $ apt-cache rdepends apt-listchanges apt-listchanges Reverse Depends: apticron kolab-cyrus-common education-common cyrus-common-2.2 apticron amavisd-new education-common cyrus-common-2.2 apticron amavisd-new cyrus-common-2.3 Neither of these are strong dependencies, FWIW. (I have stable, testing and unstable in sources.list...) Do you have any of those packages? You might also want to try 'aptitude why apt-listchanges'. Or Jimmy has removed it in the aptitude TUI and got hit by bug #570492¹. Sven ¹ http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=570492 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/87zkvura7v@turtle.gmx.de
Re: No ALSA on 2.6.32-5
On Lu, 06 sep 10, 20:53:43, David Baron wrote: Would you mind sharing with us the type of sound card installed in that system? lspci at least ;) Output of 'cat /proc/asound/cards' would also be nice. There is an ens1371, the MBs intel sound, and an mpu401 device. There is NO /proc/asound/cards That is the whole point. lspci might still work... In the past, I had compiled one of the snd_seq modules into the kernel to solve this. Using a stock Debian kernel and initrd, I hae no ALSA. Nada. Do you have alsa-base installed? Regards, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Re: iomega 2TB external USB drive
Hi Celejar I tried 'mount /dev/sdb1 /mnt' as /sda1 returned drive does not exist. Using 'tail -F /var/log/syslog' when I try the mount command using /sdb1 returns - Sep 6 15:40:38 tux-net kernel: [119018.389495] sdb: sdb1 Sep 6 15:40:38 tux-net kernel: [119018.422500] sd 4:0:0:0: [sdb] Attached SCSI disk Sep 6 15:40:38 tux-net NetworkManager: debug [1283802038.156908] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Iomega_E_xternal_HD_FAF0FDF1FFF1BF600914_0_0'). Sep 6 15:44:34 tux-net kernel: [119289.522770] NTFS volume version 3.1. Sep 6 15:44:34 tux-net kernel: [119289.538772] NTFS-fs error (device sdb1): load_system_files(): $LogFile is not clean. Mounting read-only. Mount in Windows. Sep 6 15:45:00 tux-net ntpd[3215]: synchronized to 132.246.168.148, stratum 2 Sep 6 15:47:15 tux-net ntpd[3215]: synchronized to 199.212.17.34, stratum 2 It shows a NTSF formatted omega drive. It states read only. This much I understand. I am taking a wild guess and thinking that it will show up a an external drive under 'wine' -- I could be totally wrong in that assumption. All the rest is information lost on me!!! I thank you for your assistance. My expertise is in hardware repair not software/command line issues so please bear with me. John I -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c854887.4010...@sentex.net
multiple interfaces: eth0 wlan0
Hi, I was not able to find an answer to the following question. So here it is: how do I know which interfaces is being used by default (wget, apt-get...) in debian ? Right now both eth0 and wlan0 are up (as reported by ifconfig) thanks, -- Mathieu -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlkti=mmopauc8f4zxhmgbgjnkxs-bhxav8uyxzh...@mail.gmail.com
Re: multiple interfaces: eth0 wlan0
Mathieu Malaterre wrote: I was not able to find an answer to the following question. So here it is: how do I know which interfaces is being used by default (wget, apt-get...) in debian ? Right now both eth0 and wlan0 are up (as reported by ifconfig) What is your default route? Any of these: $ netstat -nr $ route -n $ ip route show Bob signature.asc Description: Digital signature
Re: Debian based NAS? What to buy?
On Sun, Sep 5, 2010 at 4:36 AM, Jeff Latta engin...@windpumps.ca wrote: Francisco Borges wrote: I am thinking about buying a new NAS box. Not a DIY box, but a ready to use NAS (2 to max 4 trays) for home use (it has to be *small* and quiet). I'm looking for one of those too. I will probably go with the QNAP TS-219P because of its relatively small size and low power consumption which is 5W in sleep and 21W in operation. It does have one fan. Sound level is specified at 36.3 dB in operation. The only NAS (I know of) without a fan is also from QNAP but IIRC it's a single drive (TS-119). There was a thread on Debian-ARM about installation so it will run Debian. I was impressed with the number of features that the QNAP products had. It comes with embedded Linux and is expandable with their QPKG Software Package Platform. I haven't owned a QNAP product before. Any comments from those of you that do? I also never owned a QNAP box, but I do own a ReadyNas Duo which has been giving me some trouble. (BTW, actual owners of QNAP gear: I am also waiting to hear from you!) The ReadyNas Duo (and AFAIK all ReadyNas'es) run a modified version of Debian, so you could just run apt-get but you can't just install regular Debian on them (at least not in the Sparc based Duo). In practice it means I have a machine with dead software support. The Debian version on my ReadyNas is Sarge so being able to install Debian directly is indeed a major selling point for me as well. Before I had the ReadyNas I wanted a NAS with wake-on-lan (which neither my ReadyNas nor the QNAP TS-219P have). But I found that using scheduled power on/off is sufficient for my needs. Kind regards, -- Francisco -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/AANLkTi yf2s3vz1tmt5egtqk8odbhmtkuluh_...@mail.gmail.com
Re: multiple interfaces: eth0 wlan0
On Mon, Sep 6, 2010 at 10:46 PM, Bob Proulx b...@proulx.com wrote: Mathieu Malaterre wrote: I was not able to find an answer to the following question. So here it is: how do I know which interfaces is being used by default (wget, apt-get...) in debian ? Right now both eth0 and wlan0 are up (as reported by ifconfig) What is your default route? Any of these: $ netstat -nr $ route -n $ ip route show Hum... this is bad, it looks like I am using wlan0 Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 0.0.0.0 192.168.0.254 0.0.0.0 UG0 0 0 wlan0 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.21 default via 192.168.0.254 dev wlan0 Is there a way to change the default. Otherwise I'll comment out the wlan0 section in etc/network/interfaces thanks again, -- Mathieu -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktinlnhlmnougo8+p4puwtyjt2c0yoyheddiyq...@mail.gmail.com
Re: multiple interfaces: eth0 wlan0
On Mon, 06 Sep 2010 22:43:10 +0200, Mathieu Malaterre wrote: I was not able to find an answer to the following question. So here it is: how do I know which interfaces is being used by default (wget, apt-get...) in debian ? Right now both eth0 and wlan0 are up (as reported by ifconfig) Quick and dirty: make a traceroute to any Internet host and you'll know what device is in use :-) Just guessing, but I think wifi devices take preference over ethernet ones (unless otherwise specified). Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.06.20.51...@gmail.com
Re: multiple interfaces: eth0 wlan0
Mathieu Malaterre wrote: Right now both eth0 and wlan0 are up (as reported by ifconfig) Kernel IP routing table Destination GatewayGenmaskFlags MSS Window irtt Iface 192.168.0.0 0.0.0.0255.255.255.0 U 0 0 0 wlan0 0.0.0.0 192.168.0.254 0.0.0.0UG0 0 0 wlan0 This doesn't show eth0 as being up and online. This only shows wlan0. Are you sure eth0 is up and online? Bob signature.asc Description: Digital signature
Re: Any one getting aptitude frozen on update with Translation-en bzip2 ?
Yes, my aptitude is frozen right now at the same spot :( AH I am also experiencing this, seems to just be a problem with the main AH repo. I use http://ftp.uk.debian.org. The problem is http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=595691 FT Too late to hope this problem will not be discovered. FT There are many 'unofficial' repos out there, that up to now have been working fine, but now stall updating Squeeze. FT And many of us use synaptic or similar, and have no idea why a whole bunch of Translation files can not be downloaded. FT Even running apt-get shows only a Translation file hangs, but not from which server. FT I think we need to advertise the fix, maybe on the debian main page? -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/87fwxmsh82@jidanni.org
Re: sid: Console problems after starting X
On Mon, Sep 06, 2010 at 10:14:56AM +0300, Rares Aioanei wrote: On Fri, 3 Sep 2010 00:58:21 -1000 Joel Roth jo...@pobox.com wrote: [...] What video card/driver are you using? -- Rares Aioanei debian.dev.list The card is: lspci | grep -i radeon 01:05.0 VGA compatible controller: ATI Technologies Inc RS780MC [Radeon HD 3100 Graphics] The driver, I don't know. You can maybe find it in the /var/log/Xorg.0.log file pasted into a previous mail. The problem seemed to be solved by going to a stock kernel. Thanks for your questions. Joel -- Joel Roth -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100906224711.ga19...@sprite
Re: Re (2): Linux hub
Original Message From: b...@iguanasuicide.net To: debian-user@lists.debian.org Subject: Re: Re (2): Linux hub Date: Sun, 5 Sep 2010 14:56:53 -0500 In 380-22010905162433...@netptc.net, ow...@netptc.net wrote: Original Message From: peasth...@shaw.ca From: PT M. pen...@gmail.com Quoting from http://en.wikipedia.org/wiki/Network_switch, Switches may operate at one or more OSI layers, including physical, data link, network, or transport (i.e., end-to-end). Lots of terminology confusion. It used to be hubs were at level 1, switches at level 2, routers at level 3 and gateways above level 3. Larry That's not quite true; it's never been that clear cut, although some would like to believe that. Hubs are dumb devices, almost always implemented entirely in hardware, and as such basically ignored everything above layer 1. Mostly they should be avoided for TCP/IP over Ethernet, since they generate more traffic then required by Ethernet (which is layer 1 and 2). In hubs, the most complex IC would not be complex enough to call a CPU in modern times. Switches are smart devices, but not traditionally programmable. They do use some RAM to store information about seen packets in order to make decisions about future packets. They do not use out-of-band information to make switching decisions. With TCP/IP over Ethernet, they generally operate at layer 2 (Ethernet, which is also layer 1) or 3. Switches that do understand a layer above 2 will generally fall back to layer 2 when encountering a higher layer protocol they do not recognize. Switches generally have a CPU, for handling the configuration interface, which might be extensive, even on layer 2 switches, given all the parts of the Ethernet protocol. However, the hardware is designed so that packets do not have to travel through the CPU bus. Routers are programmable devices. They have detailed configurations plus static routes and routing rules. In addition, they generally use out-of-band information (like BGP etc.) to update their routes and rules in near-real- time. They likely drop data that doesn't correspond to a layer 3 protocol they understand, but could be configured to route it somewhere. They will inspect layer 4 and possibly above data to aid their layer 3 routing. They will certainly have a CPU, but they also have switch-like hardware so that packets do not have to travel through the CPU bus. Even packets that need to travel to the CPU for special processing may be routed but also saved so that traffic doesn't have to wait on the CPU; alternatively there may be specialized processors have more bandwidth then the CPU but much more limited functionality. A PC can pretend to be a router, switch, or even a hub. However, unless it has some fairly specialized hardware, high load will reveal the PC. The main cause of this is saturation of the bus between the network card and the CPU, since all the packets have to flow to the CPU and back. Gateway is a much more generic term, but basically it connects your network with an outside network (or the Internet). It will generally have at least minimal routing capabilities, but it may simply be an intermediary, linking a single switch/router to a single other gateway. However, it may also be a feature-complete router and firewall along with doing layer 5-7 inspection to enforce network policy. For most personal and small business needs, it can simply be a PC; the traffic to outside networks being too constrained to need more bandwidth then is available across a modern PC bus, especially if all that bandwidth is through a single connection to a single ISP at any one time. Once external traffic reaches some level though, you'll need specialized hardware, so your gateway will likely be an enterprise router. The specialized hardware that routers need, basically a programmable version of the hardware in a switch, was/is one of the main roadblocks on the way to a optical-only Internet backbone. For the longest time, even when the links where optical cable, the routers where traditional electronic devices, so that the signal had to be decoded/encoded from optical to electric to optical which can introduce unnecessary delays. TL;DR: That's an over-simplification or a case of nostalgia. -- Boyd Stephen Smith Jr. ,= ,-_-. =. b...@iguanasuicide.net ((_/)o o(\_)) ICQ: 514984 YM/AIM: DaTwinkDaddy `-'(. .)`-' http://iguanasuicide.net/\_/ Boyd I'm not disagreeing with you in practice but many years ago these WERE the definitions the ITU and ISO dealt with. IIRC it was the vendors who screwed things up by introducing such products as swithcing hub L -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/380-2201091623840...@netptc.net
Re: Re (2): Linux hub
In 380-2201091623840...@netptc.net, ow...@netptc.net wrote: Original Message From: b...@iguanasuicide.net In 380-22010905162433...@netptc.net, ow...@netptc.net wrote: Original Message From: peasth...@shaw.ca From: PT M. pen...@gmail.com Quoting from http://en.wikipedia.org/wiki/Network_switch, Switches may operate at one or more OSI layers, including physical, data link, network, or transport (i.e., end-to-end). Lots of terminology confusion. It used to be hubs were at level 1, switches at level 2, routers at level 3 and gateways above level 3. Larry TL;DR: That's an over-simplification or a case of nostalgia. I'm not disagreeing with you in practice but many years ago these WERE the definitions the ITU and ISO dealt with. I love to see an actual ISO or ITU document that provides a normative definition of the any of those terms. Since you are claiming such a document exists, perhaps you could provide a URL, ISBN, or other reference? -- Boyd Stephen Smith Jr. ,= ,-_-. =. b...@iguanasuicide.net ((_/)o o(\_)) ICQ: 514984 YM/AIM: DaTwinkDaddy `-'(. .)`-' http://iguanasuicide.net/\_/ signature.asc Description: This is a digitally signed message part.
Latest Lenny update: What new hardware is supported?
I'm specifically interested in whether the Verizon USB 760 broadband wireless modem is now supported, but in general, when the kernel image is upgraded, where can I find a list of the new hardware inclusions without asking anyone to lead me by the hand? I tried linuxhardware.org but apparently they have stopped accepting new users. Thanks for any help. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/7d410a0830959e1c0ab0272eee1de90a.squir...@webmail.ntelos.net
Re: iomega 2TB external USB drive
On Mon, 06 Sep 2010 16:01:11 -0400 John Lindsay jcl...@sentex.net wrote: Hi Celejar I tried 'mount /dev/sdb1 /mnt' as /sda1 returned drive does not exist. Using 'tail -F /var/log/syslog' when I try the mount command using /sdb1 returns - The drive can be assigned different letters by the kernel, depending on what else has already been seen by it when you plug it in. That's why in general, once you have things working, the recommended method is to mount by label or uuid. Sep 6 15:40:38 tux-net kernel: [119018.389495] sdb: sdb1 Sep 6 15:40:38 tux-net kernel: [119018.422500] sd 4:0:0:0: [sdb] Attached SCSI disk Sep 6 15:40:38 tux-net NetworkManager: debug [1283802038.156908] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Iomega_E_xternal_HD_FAF0FDF1FFF1BF600914_0_0'). Sep 6 15:44:34 tux-net kernel: [119289.522770] NTFS volume version 3.1. Sep 6 15:44:34 tux-net kernel: [119289.538772] NTFS-fs error (device sdb1): load_system_files(): $LogFile is not clean. Mounting read-only. Mount in Windows. Sep 6 15:45:00 tux-net ntpd[3215]: synchronized to 132.246.168.148, stratum 2 Sep 6 15:47:15 tux-net ntpd[3215]: synchronized to 199.212.17.34, stratum 2 It shows a NTSF formatted omega drive. It states read only. This much I understand. I am taking a wild guess and thinking that it will show up a an external drive under 'wine' -- I could be totally wrong in that assumption. It may or it may not, but we're not interested in that. Since the mount seems to have worked, you now need to look at /mnt using your favorite file manager - anything from 'ls' to 'mc' to Nautilus, Thunar, etc. All the rest is information lost on me!!! Don't know much about NTFS, but IIRC, the linux support (in particular the vanilla in-kernel support) in incomplete, and insufficient for certain repair operations, which is why you're being told to mount in Windows, so that OS can do some housekeeping. Don't know how serious such a message is likely to be, but if you're only mounting read-only, you probably don't have much to lose. Famous last words - don't hold me to them! I thank you for your assistance. My expertise is in hardware repair not software/command line issues so please bear with me. Good luck, and report back on your findings (even a simple 'ls /mnt' will be useful for a start). Celejar -- foffl.sourceforge.net - Feeds OFFLine, an offline RSS/Atom aggregator mailmin.sourceforge.net - remote access via secure (OpenPGP) email ssuds.sourceforge.net - A Simple Sudoku Solver and Generator -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100906202646.e4b27ac9.cele...@gmail.com
Re: Re (2): Linux hub
On Mon, 06 Sep 2010 00:43:38 -0500 Stan Hoeppner s...@hardwarefreak.com wrote: ... A traditional el cheapo desktop 8 port ethernet switch, such as the $10 Rosewill 10/100 switch on my desk, has a single simple 8x8 crossbar switch ASIC, enough RAM to store 8192 MAC addresses, and possibly a ... The larger switch ASICs cost far more than those in $10 eight port switches, have more memory for storing MAC addresses, and have extensive I'm curious; especially for the cheap switches, why would they need to store so many MAC addresses? What's the use case for a cheap switch actually seeing thousands of MACs since 'boot'? Celejar -- foffl.sourceforge.net - Feeds OFFLine, an offline RSS/Atom aggregator mailmin.sourceforge.net - remote access via secure (OpenPGP) email ssuds.sourceforge.net - A Simple Sudoku Solver and Generator -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100906214237.da06e888.cele...@gmail.com
Re: Unicode Character key-in problem
On Mon, 6 Sep 2010 06:45:06 + (UTC) Camaleón noela...@gmail.com wrote: ... In GNOME, you can get it by pressing Ctrl+Shift+u and release the keys. You'll get an underline u. Then you have to type the desired characters sequence, i.e., for currency sign type 00a4 and press enter: http://www.hermit.org/Linux/ComposeKeys.html General GTK thing; I do it on my XFCE system. Celejar -- foffl.sourceforge.net - Feeds OFFLine, an offline RSS/Atom aggregator mailmin.sourceforge.net - remote access via secure (OpenPGP) email ssuds.sourceforge.net - A Simple Sudoku Solver and Generator -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100906214513.7a0fab24.cele...@gmail.com
Re: How can I create a FAT32 or NTFS FS
On Mon, 6 Sep 2010 10:32:12 +0300 Andrei Popescu andreimpope...@gmail.com wrote: On Lu, 06 sep 10, 09:25:25, Merciadri Luca wrote: Hi, I sometimes use gparted to make a filesystem in an easier way than using CLI. The fact is that gparted appears, to me, as a frontend for CLI commands. I want to format an USB key, and change the filesystem to fat32, or ntfs. It is currently under ext3. I unmount it, delete the FS, and manage to create a new partition. But `fat32' and `ntfs' are impossible choices when creating the new FS. (They are deactivated.) Why? You are probably missing the packages dosfstools and ntfsprogs. They are both 'Suggested' by gparted, but not 'Recommended' because most GNU/Linux users should not need them. I suppose that's debatable. I never touch Windows unless I have to, but I do often need to sneaker-net files between my Debian system and other Windows systems via USB flash drive, which therefore must be manipulated via dosfstools ... Celejar -- foffl.sourceforge.net - Feeds OFFLine, an offline RSS/Atom aggregator mailmin.sourceforge.net - remote access via secure (OpenPGP) email ssuds.sourceforge.net - A Simple Sudoku Solver and Generator -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100906214843.9983b10f.cele...@gmail.com
Re: iomega 2TB external USB drive
Hi Celelar Just going through 'applications-Debian-applications-system-administration' and started up 'gnome partition editor'. It showed me that its file system is ntsf; its mountpoint is /mnt; its label is IOMEGA HDD; total size is 1.82TB and I have used 61.37 GB. It is mounted -- but not visible on the desktop. I first used it to backup my win7 drive -- I wonder if I were to repartition it would it then be visible to the desktop? The data that is on the drive is just a backup of my win7 and of no real concern at this time. John -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c85a1f3.5090...@sentex.net
kredit tanpa agunan scb cepat dan mudah
kredit tanpa agunan dari SCB memberikan pinjaman hingga Rp.100.000.000Rp.-150.000.000 , bunga hingga 1,50 % / bulan.Proses yang mudah dan cepat 7- 10 hari kerja dengan kepastian approval yg tinggi DATA YG DIBUTUHKAN UNTUK PENGAJUAN 1 BUNGA 1,50 %: 1.Foto copy KTP 2.Foto copy Credit Card 3.Foto copy billing credit card 1 bulan terakhir 4.Foto copy NPWP untuk pinjaman diatas Rp.50 juta 5.Foto Copy nomor rek.tabungan 6.Materai Rp. 6.000 1 bh. Untuk keterangan lebih lanjut hubungi : HARTAWAN 0858-83824829 Or harta...@yahoo.co.id -- View this message in context: http://old.nabble.com/kredit-tanpa-agunan-scb-cepat-dan-mudah-tp29639130p29639130.html Sent from the Debian User mailing list archive at Nabble.com. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/29639130.p...@talk.nabble.com
Re: iomega 2TB external USB drive
On Mon, 06 Sep 2010 22:22:43 -0400 John Lindsay jcl...@sentex.net wrote: Hi Celelar Just going through 'applications-Debian-applications-system-administration' and started up 'gnome partition editor'. It showed me that its file system is ntsf; its mountpoint is /mnt; its label is IOMEGA HDD; total size is 1.82TB and I have used 61.37 GB. It is mounted -- but not visible on the desktop. I first used it to backup my win7 drive -- I wonder if I were to repartition it would it then be visible to the desktop? The data that is on the drive is just a backup of my win7 and of no real concern at this time. I can't help you with desktop stuff, since I do all my mounting and file-management via cli / tui (mc) tools. I have no idea if repartitioning would make a difference, but it seems rather a drastic step for such a simple thing as desktop visibility. Sorry I can't help with the desktop stuff. I still recommend you check if the data is there and accessible. This way, if you repost the question, you'll be able to say exactly what works and what doesn't. Celejar -- foffl.sourceforge.net - Feeds OFFLine, an offline RSS/Atom aggregator mailmin.sourceforge.net - remote access via secure (OpenPGP) email ssuds.sourceforge.net - A Simple Sudoku Solver and Generator -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100906232552.0ae6ae93.cele...@gmail.com
Re: Unicode Character key-in problem
Celejar cele...@gmail.com writes: On Mon, 6 Sep 2010 06:45:06 + (UTC) Camaleón noela...@gmail.com wrote: ... In GNOME, you can get it by pressing Ctrl+Shift+u and release the keys. You'll get an underline u. Then you have to type the desired characters sequence, i.e., for currency sign type 00a4 and press enter: http://www.hermit.org/Linux/ComposeKeys.html General GTK thing; I do it on my XFCE system. General X11 thing; they can all be done at the command line. A full list for UTF-8 is at /usr/share/X11/locale/en_US.UTF-8/Compose, and similar for other locales. -- Carl Johnsonca...@peak.org -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/87fwxmb4mm@oak.localnet
Citeste - Produse Natural si BioFlavonoizi
Buna ziua, Probabil e cel mai ciudat e-mail pe care l-ati primit pana acum, dar acordati doar doua minute de atentie si nimic nu va va sta in cale sa il stergeti dupa. Prin acest mesaj (pentru a nu fi interpretati ca spam sau rauvoitori, consideram acest e-mail ca pe un gest de apreciat datorita moralitatii de care incercam sa dam dovada), cerem acordul dumneavoastra in privinta primirii unei reclame la Produsele promovate de site-ul nostru : www.tratament-celulestem.ro Produsele noastre (Olimpiq Stem Xcell, Flavonoid Flavin 7 , etc.) reprezinta un tratament natural pentru inmultirea celulelor Stem adulte ( probabil ati auzit din diverse surse cat de importante sunt acestea pentru sanatate, avand capacitatea sa inlocuiasca orice celula din organism, vindecand sau cel putin imbunanatind starea sanatatii dumneavoastra). Punem accent pe ideea increderii ca accesarea acestui website nu constituie nici un pericol. Insistam chiar sa apelati la un specialist care sa verifice si sa garanteze siguranta accesarii. Este posibil sa va ganditi : A, doar unii cu reclama mincinoasa . Calitatea produselor noastre este in primul rand reflectata atat prin pretul acestora cat mai ales prin marturii reale ale actualilor clienti. O lista detaliata privind raportul boala-tratament gasiti pe site-ul nostru. Asteptam raspunsul dumneavoastra pozitiv sau negativ cu privire la acordul pentru primirea mesajului ce va contine reclama produselor noastre. Va asteptam la un tur al website-ului nostru, iar daca vreti sa comandati produsele noastre aveti un formular online prin care va cerem numele si numarul de telefon pentru a va contacta in maxim 10 minute dupa primirea comenzii dumneavoastra. Pentru siguranta si transparenta comenzile vor fi expediate prin FanCurier iar plata transportului, in functie de valoarea comenzii , o vom suporta . Pentru comenzi directe, aveti puse la dispozitie numerele de telefon la care ne puteti contacta si pentru alte detalii. FOARTE IMPORTANT : Daca nu va intereseaza produsele, poate sunteti interesat(a) in a deveni distribuitor. In acest fel veti putea castiga bani din vanzare. Pentru mai multe detalii ne puteti contacta la numerele de telefon puse la dispozitia dumneavoastra pe site, sau completand formularul de contact din sectiunea cu acelasi nume, prin care ne puteti adresa intrebari 24/24 , 7 zile pe saptamana. PS: V-am introdus in acest mesat text si o lista completa cu afectiunile pe care le trateaza produsele noastre (Nu spune nimeni ca vindeca boli precum Parkinson sau Autism, insa putem garanta ca produsele vor imbunatati simtitor starea de sanatate a consumatorului) Afectiune Acnee Acondropatie (hipoplazia cartilajului de crestere) Afectiuni ale ficatului Afectiuni ale glandei tiroide Afectiuni ale prostatei Afectiuni ale rinichilor Afectiuni ale sistemului nervos Afectiuni ale sistemului osos Afectiuni ale sistemului vascular Afectiuni ale vezicii urinare Afectiuni Cardiovasculare Afectiuni dermatologice Afectiuni gastro-intestinale Afectiuni Oftalmologice Alergie la faina Alergii Alzheimer Anemii Angina Pectorala Anorexie nervoasa Anxietate Arsuri (refacerea pielii) Arteriopatie Artrita Artroza Ascita carcinomatoasa(cancer in faza terminala) Astm Ateroscleroza Autism Bronsita Caderea Parului Calculi biliari Cancer Cancer de col uterin Cancer de colon Cancer de piele Cancer de prostata Cancer de rect Cancer de vezica urinara Cancer esofagian Cancer faringian Cancer Gastric Cancer mamar Cancer Microcelular (plamani) Cancer pulmonar Cancer pulmonar in faza incipienta Candida Candidoza vaginala Cardiomiopatie dilatativa Cardiopatie Cardiopatie ischemica Carii si alte afectiuni Dentare Cataracta Celulita Ciroza Hepatica Colesterol Ridicat Colita de fermentatie Colita ulceroasa, boala Chron Constipatie Cresterea Imunitatii Depresii Dereglari Hormonale Dermatita seboreica Dermatite Desprindere de retina Dezechilibre endocrine DIABET Discopatie Disfunctii erectile Disfunctii pancreatice Distonie Distrofie Musculara Dureri Menstruale Eczeme Edeme la membrele inferioare Endocardita de valva mitrala, insuficienta mitrala, insuficienta aortica Epilepsie Fibroza pulmonara Gastrita Gastrita Glaucom ( Cataracta Verde ) Gripa Guta Hemoragie si hipoxie cerebrala la nastere (pentru copii) Hemoragii Hemoragii Cerebrale Hemoroizi Hepatita Hepatita C Hernie de disc Hernie de disc Herpes Hiperaciditate gastrica Hiperlipidemie Hipertensiune arteriala Imbunatatirea vederii(micsoreaza dioptriile) IMPOTENTA Imunitate scazuta Inarirea si regenerarea organismului Incostienta Infarct Cerebral Infarct Miocardic Infectii Infectii ale intestinelor Infectii ale sangelui Infectii ale stomacului Infectii ale tesutului cutanat Infectii cu Helicobacter Pylori Infectii Urinare Infectii urinare Infectii Virale Infertilitate Inflamatii Inflamatii ale colonului Inflamatii ale mucoaselor Inflamatii articulare Inflamatii la nivelul urechilor
Re: Unicode Character key-in problem
On Mon, 06 Sep 2010 20:43:13 -0700 Carl Johnson ca...@peak.org wrote: Celejar cele...@gmail.com writes: On Mon, 6 Sep 2010 06:45:06 + (UTC) Camaleón noela...@gmail.com wrote: ... In GNOME, you can get it by pressing Ctrl+Shift+u and release the keys. You'll get an underline u. Then you have to type the desired characters sequence, i.e., for currency sign type 00a4 and press enter: http://www.hermit.org/Linux/ComposeKeys.html General GTK thing; I do it on my XFCE system. General X11 thing; they can all be done at the command line. A full list for UTF-8 is at /usr/share/X11/locale/en_US.UTF-8/Compose, and similar for other locales. I don't usually use X without GTK, but I was relying on this: http://en.wikipedia.org/wiki/Unicode_input#Hex_input Celejar -- foffl.sourceforge.net - Feeds OFFLine, an offline RSS/Atom aggregator mailmin.sourceforge.net - remote access via secure (OpenPGP) email ssuds.sourceforge.net - A Simple Sudoku Solver and Generator -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100906235811.ba9817aa.cele...@gmail.com
Re: How can I create a FAT32 or NTFS FS
On Mon, Sep 6, 2010 at 6:48 PM, Celejar cele...@gmail.com wrote: On Mon, 6 Sep 2010 10:32:12 +0300 Andrei Popescu andreimpope...@gmail.com wrote: You are probably missing the packages dosfstools and ntfsprogs. They are both 'Suggested' by gparted, but not 'Recommended' because most GNU/Linux users should not need them. I suppose that's debatable. I never touch Windows unless I have to, but I do often need to sneaker-net files between my Debian system and other Windows systems via USB flash drive, which therefore must be manipulated via dosfstools ... dosfstools, libfuse2, ntfs-3g, and ntfsprogs are pretty much essential to have full Windows file compatibility for copying/sharing functions, at least in my experience.
Re: iomega 2TB external USB drive
On 9/6/2010 9:22 PM, John Lindsay wrote: Hi Celelar Just going through 'applications-Debian-applications-system-administration' and started up 'gnome partition editor'. It showed me that its file system is ntsf; its mountpoint is /mnt; its label is IOMEGA HDD; total size is 1.82TB and I have used 61.37 GB. It is mounted -- but not visible on the desktop. I first used it to backup my win7 drive -- I wonder if I were to repartition it would it then be visible to the desktop? The data that is on the drive is just a backup of my win7 and of no real concern at this time. John It may help a little to change the label to something not containing a whitespace character. This may not be the source of your problem, but it could be a cause of other problems. The architects of the *nixes never really planned for spaces inside file names, I think. You can use them, but some programs may be confused by them. Better to avoid it by using hyphens, dots, and underscores. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c85b830.4010...@allums.com
Re: How can I create a FAT32 or NTFS FS
Merciadri Luca put forth on 9/6/2010 3:26 AM: Well, I don't fiddle anymore with Microsoft stuff, but someone needs to share pictures with me, and, obviously, he's not a GNU/linux user. MIME attachments, FTP, Photo bucket, etc. Lots of ways to transfer pictures in the absence of physical media or problems with it. He could always just burn you a CD, or vice versa. -- Stan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c85bf35.4000...@hardwarefreak.com
Re: How can I create a FAT32 or NTFS FS
On Lu, 06 sep 10, 20:59:00, Mark wrote: On Mon, Sep 6, 2010 at 6:48 PM, Celejar cele...@gmail.com wrote: On Mon, 6 Sep 2010 10:32:12 +0300 Andrei Popescu andreimpope...@gmail.com wrote: You are probably missing the packages dosfstools and ntfsprogs. They are both 'Suggested' by gparted, but not 'Recommended' because most GNU/Linux users should not need them. I suppose that's debatable. I never touch Windows unless I have to, but I do often need to sneaker-net files between my Debian system and other Windows systems via USB flash drive, which therefore must be manipulated via dosfstools ... dosfstools, libfuse2, ntfs-3g, and ntfsprogs are pretty much essential to have full Windows file compatibility for copying/sharing functions, at least in my experience. Please note the use of should vs. do ;) and also, I was just trying to point out that interesting packages can be found in the Suggests of a package. I agree with the importance of ntfs-3g, especially since the kernel driver is not likely to replace it soon, but whether it's actually necessary to create any more NTFS partitions is indeed debatable :) Regards, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Re: multiple interfaces: eth0 wlan0
On Lu, 06 sep 10, 22:43:10, Mathieu Malaterre wrote: Hi, I was not able to find an answer to the following question. So here it is: how do I know which interfaces is being used by default (wget, apt-get...) in debian ? Right now both eth0 and wlan0 are up (as reported by ifconfig) In cases where you have wired and wireless interfaces and use both it makes sense to use a dedicated software to manage them, like wicd. It switches automatically to wired if present (configurable), network-manager probably does this as well. Regards, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Re: Latest Lenny update: What new hardware is supported?
On Mon, Sep 06, 2010 at 07:46:00PM -0400, tw...@cstone.net wrote: I'm specifically interested in whether the Verizon USB 760 broadband wireless modem is now supported, but in general, when the kernel image is upgraded, where can I find a list of the new hardware inclusions without asking anyone to lead me by the hand? New hardware support? I don't think updates to the stable release adds that. According to the news[1], the only thing changed is a few dozens of packages where miscellaneous bugs were fixed and some security updates was applied. -- Regards, Alexander Batischev 1024D/69093C81 F870 A381 B5F5 D2A1 1B35 4D63 A1A7 1C77 6909 3C81 signature.asc Description: Digital signature