My sound system was working perfectly but something must have changed
when I ran apt-get update and apt-get dist-upgrade. The system is lenny
with kernel-image-2.6.22-2. I ran alsaconf but still get the message,
Cannot initialize DSP
I scrolled through the October archive but didn't spot a
Many thanks for all the helpful leads. I believe every one of them
could do the tasks I want to tackle. I am happily experimenting to
determine my favorite.
Tom George
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I'm feeling stupid. I used to have a math package which inverted
matrices to solve systems of linear equations - i.e. enter the matrix
and the y values and the program inverts the matrix and reports the x
values. I know how to do it manually but it is laborious for large
matrices. Perhaps
On Tue, Oct 02, 2007 at 02:39:41PM +0100, Chris Davies wrote:
Thomas H. George [EMAIL PROTECTED] wrote:
There was no esfw41.bin in my system. I added a line usb 0x048b 0x011b
to snapscan.conf and after this gimp ran 4 succesful color scans with
the Perfection 2400 before locking up
On Tue, Sep 25, 2007 at 12:59:26PM -, Chris Davies wrote:
Thomas H. George [EMAIL PROTECTED] wrote:
I own two Epson scanners, a Perfection 2400 Photo and a Perfection V100
Photo.
Neither work with Debian Linux.
Check the location of the firmware file, esfw41.bin. A few upgrades ago
On Tue, Sep 25, 2007 at 12:12:15AM +, Felix Karpfen wrote:
On Mon, 24 Sep 2007 12:19:16 -0400, Thomas H. George wrote:
On Mon, 24 Sep 2007 12:19:16 -0400, Thomas H. George wrote:
I own two Epson scanners, a Perfection 2400 Photo and a Perfection V100
Photo.
Neither work
I own two Epson scanners, a Perfection 2400 Photo and a Perfection V100
Photo.
Neither work with Debian Linux.
Both are known to work flawlessly with Windows XP Professional. I hate
to reboot to Windows XP Professional and do so only as a last resort.
At present I have no choice when I need to
I was able to run iscan for my Epson Perfection V100 Photo scanner but
only as root. This no longer works. I get a message, Could not send a
command to scanner.
The system is lenny with a 2.6.21 linux-image kernel.
I have tried unplugging and plugging the usb cable to reset the scanner.
I
Joerg Schily's original cdrecord works perfectly.
Apparently I have a box of bad blank cdrw disks, 100 of them unfortunately.
I tried cdrw disks from another box and cdrecord ran the Lite-On drive at
25x with no problems.
Tom George
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
On Sept. 7 I posted a problem,
I have an Etch box with a linux-image-2.6.18-5-k7. All works well but
wodim -devices
Beginning native device scan. This may take a while ...
wodim: Invalid argument. Cannot Set SG_SET_TIMEOUT
Apt-get install wodim confirms I have the latest release. I
.
.
.
I created this file but in /etc/postfix/sasl/ as somewhere there is a
note that this is the Debian way.
Any reference please? (I'm keen on having everything The Debian Way)
/usr/share/doc/postfix/README.Debian
Actually, /etc/postfix/sasl was already a directory.
.
.
.
Still posting from iceape.
I removed the server line; it was clearly a mistake. I don't remember
entering such a line. I believe it was automatically generated or
picked up from some previous configuration.
I am attaching the last 20 lines of /var/log/mail/mail.log. They show
that if I
On Fri, Sep 14, 2007 at 08:24:54PM +0300, Andrei Popescu wrote:
Thomas H. George [EMAIL PROTECTED] wrote:
Still posting from iceape.
No, now posting from mutt
I removed the server line; it was clearly a mistake. I don't
remember entering such a line. I believe it was automatically
at 11:58:38AM -0400, Thomas H. George wrote:
I know there is another package which must be installed before make
menuconfig will work but I have forgotten what it is.
Please refresh my memory.
Tom George
run make menuconfig otherwise (you'll need libncurses5-dev installed)
I
Still using iceape. I have tried dpkg-reconfigure postfix selecting
Smarthost. First I entered my ISP provider, ran /etc/init.d/postfix
reload and then sent a message from mutt to my other mail box,
[EMAIL PROTECTED] Next I repeated this entering
outgoing.verizion.net which I must use for
I am again posting from iceape. I had thought I had solved the problem
when after running dpkg-reconfigure postfix one of my earlier postings
from mutt appeared on the list. I then tried to respond to the original
thread from mutt but after 24 hours the response has not appeared on the
list.
I know there is another package which must be installed before make
menuconfig will work but I have forgotten what it is.
Please refresh my memory.
Tom George
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I struggled for two days trying to fix exim4. I posted the following
message,
I changed the /etc/apt/sources.list entries from etch to lenny and ran
apt-get update followed by apt-get dist-upgrade. All went well but I
did not accept the new exim4 configuration as in the past I had to edit
On Fri, Sep 07, 2007 at 05:34:13PM -0500, Mumia W.. wrote:
On 09/07/2007 03:19 PM, Thomas H. George wrote:
I have an Etch box with a linux-image-2.6.18-5-k7. All works well but
wodim -devices
Beginning native device scan. This may take a while ...
wodim: Invalid argument. Cannot
On Fri, Sep 07, 2007 at 05:34:13PM -0500, Mumia W.. wrote:
On 09/07/2007 03:19 PM, Thomas H. George wrote:
I have an Etch box with a linux-image-2.6.18-5-k7. All works well but
wodim -devices
Beginning native device scan. This may take a while ...
wodim: Invalid argument. Cannot
I purchased an HP desktop with a SATA hard drive and a SATA dvdrom/cdrw
and added a second SATA hard drive on which I want to install Debian Etch.
I downloaded debian-40r1-amd64-netinst.iso, burnt a cd and booted the
box with the cd. Initially all went well - i.e. the netinst program
booted
I have an Etch box with a linux-image-2.6.18-5-k7. All works well but
wodim -devices
Beginning native device scan. This may take a while ...
wodim: Invalid argument. Cannot Set SG_SET_TIMEOUT
Apt-get install wodim confirms I have the latest release. I have also
run apt-get
I had this problem with an earlier version of exim4 and was advised to
change the line
smtp_accept_queue_per_connection = *
to
smtp_accept_queue_per_connection = 0
in the file /etc/exim4/exim4.conf.template. There is no longer such a
line in exim4.conf.template.
Is there a new
Kumar Appaiah wrote:
On Sun, Sep 02, 2007 at 06:16:05PM -0400, Thomas H. George wrote:
Does /var/log/mail.log say to where the messages were delivered?
Ben
It says connection refused by 127.0.0.1
What is the output of mailq?
Kumar
exim: permission denied
Kumar Appaiah wrote:
On Mon, Sep 03, 2007 at 08:26:19AM -0400, Thomas H. George wrote:
In ./usr/sbin exim is a symlink to exim4. exim is owned by root:root with
777 permissions. exim4 was owned by root:tom with 731 permissions. I
changed the permissions to 777 but this did not correct
Benjamin A'Lee wrote:
On Mon, Sep 03, 2007 at 10:52:12AM -0400, Thomas H. George wrote:
Kumar Appaiah wrote:
On Mon, Sep 03, 2007 at 08:26:19AM -0400, Thomas H. George wrote:
In ./usr/sbin exim is a symlink to exim4. exim is owned by root:root
with 777 permissions. exim4
I changed the /etc/apt/sources.list entries from etch to lenny and ran
apt-get update followed by apt-get dist-upgrade. All went well but I
did not accept the new exim4 configuration as in the past I had to edit
the configuration. As a result exim4 was left in a broken state that
could
Benjamin A'Lee wrote:
On Sun, Sep 02, 2007 at 02:26:44PM -0400, Thomas H. George wrote:
I changed the /etc/apt/sources.list entries from etch to lenny and ran
apt-get update followed by apt-get dist-upgrade. All went well but I did
not accept the new exim4 configuration as in the past I
I have been given an emachine M5310 laptop with a dead battery and am
considering trying to convert it to a debian etch laptop. I can boot it
with a GRML cd and lsdev reports wifi0 when an Activa wifi card is
plugged in. I tried using wlanconfig but have not been able to specify
a static IP
Problem: USB Scanner locks up (does not reset?) after one or two scans.
Disconnecting the usb cable and reconnecting it solves the problem for
another couple scans.
The system is Etch with a 2.6.18 kernel compiled from the Debian source.
The problem was first encountered several months ago
On Wed, Jun 20, 2007 at 10:02:12AM -0500, Hugo Vanwoerkom wrote:
Thomas H. George wrote:
mplayer worked once, then no more. Using the iceape browser I went to a
www.whyy.org and connected to the sound stream - no problem. Then
stopped this stream, went to www.wrti.org and connected
mplayer worked once, then no more. Using the iceape browser I went to a
www.whyy.org and connected to the sound stream - no problem. Then
stopped this stream, went to www.wrti.org and connected to the sound
stream - mplayer quickly reported 99% complete and the buffer just kept
on filling.
On Fri, Jun 08, 2007 at 05:25:10PM -0400, Bernard wrote:
Hi,
What kind of applications can open and use RAW image file created by
digital cameras? Does such applications exist for Linux?
See the article DEEP IMAGES in the July issue of Linux Journal. I
found it helpful.
Tom George
On Mon, Apr 16, 2007 at 11:17:25AM -0700, Andrew Sackville-West wrote:
On Sun, Apr 15, 2007 at 05:06:38PM -0400, Thomas H. George wrote:
On bootup - Etch, stock 2.6.18 kernel - my Brothers HL-730 laser printer
prints a partial test page and stops with the error light flashing.
I don't
On bootup - Etch, stock 2.6.18 kernel - my Brothers HL-730 laser printer
prints a partial test page and stops with the error light flashing.
I don't need or want this test page. The printer is almost 10 years old
but it works fine on those rare occasions (like income tax preparation)
when I
On Thu, Apr 05, 2007 at 09:20:26AM -0400, Greg Folkert wrote:
On Thu, 2007-04-05 at 09:01 -0400, Thomas H. George wrote:
I installed kino with apt-get. Capture from my video camera worked fine
but export to dvd failed. Help showed mjpegtools was required. When
apt-cache search couldn't
I installed kino with apt-get. Capture from my video camera worked fine
but export to dvd failed. Help showed mjpegtools was required. When
apt-cache search couldn't find it I downloaded a copy from the
internet. With mjpegtools installed export still failed with a message
mjpeg2enc:
On Tue, Apr 03, 2007 at 10:02:02PM -0400, Douglas Allan Tutty wrote:
On Tue, Apr 03, 2007 at 08:25:15PM -0400, Thomas H. George wrote:
On Tue, Apr 03, 2007 at 06:32:47PM +0300, Andrei Popescu wrote:
Thomas H. George [EMAIL PROTECTED] wrote:
Before shutting the old system down I
On Mon, Apr 02, 2007 at 05:19:29PM -0700, Jeff D wrote:
On Mon, 2 Apr 2007, Thomas H. George wrote:
On Mon, Apr 02, 2007 at 08:17:05AM -0700, Jeff D wrote:
On Mon, 2 Apr 2007, Thomas H. George wrote:
After netinst of etch attempts to start iceape and openoffice as a
regular
user fail
On Tue, Apr 03, 2007 at 06:32:47PM +0300, Andrei Popescu wrote:
Thomas H. George [EMAIL PROTECTED] wrote:
I rebooted and gdm starts, opens icewm with aforementioned problems.
I can only stop gdm as root.
If I run startx as tom it starts gdm and opens icewm with the same
After netinst of etch attempts to start iceape and openoffice as a
regular user fail. I was able to alter permissions to allow a regular
user to open a console window. If, in the console window I become root,
then as root I can successfully start and user both iceape and
openoffice. I need
On Mon, Apr 02, 2007 at 08:17:05AM -0700, Jeff D wrote:
On Mon, 2 Apr 2007, Thomas H. George wrote:
After netinst of etch attempts to start iceape and openoffice as a regular
user fail. I was able to alter permissions to allow a regular user to
open a console window. If, in the console
mozilla openoffice wont start.
netinst of Etch worked perfectly with all hardware working, internet
accessible from console, xorg.conf ok, gdm and icewm ok, but
mozilla start from default fails, openoffice start fails with internal
error message. The .xsesseion-error file ends with
On Sat, Mar 24, 2007 at 08:14:35PM -0400, Thomas H. George wrote:
Relevant information:
Box assembled with ASUS M2N4-SLI motherboard, AMD64 cpu, two
hard drives, 2 GB memory
In BIOS setup, POWER there is an option ACPI APIC Support. When this is
disabled the system boots
I just built a system with an ASUS M2N2-SLI motherboard and an AMD64
cpu. It looks very good so far. I have Etch running from a netinst.
The ASUS installation CD contains a directory for Linux giving links to
several websites to setup audio and 64 bit operation. I haven't checked
these out yet
Tried both etch RC2 netinst amd64 and daily built netinst amd64. Both
stalled after
io scheduler cfq registered (default)
Tried to run reportbug installation-report but this failed.
Relevant information:
Box assembled with ASUS M2N4-SLI motherboard, AMD64 cpu, two
On Sun, Mar 11, 2007 at 08:28:00PM -0400, Roberto C. Sanchez wrote:
On Sun, Mar 11, 2007 at 08:15:37PM -0400, Thomas H. George wrote:
The motherboard supports a SATA drive but on bootup there is no entry
for it in /dev
If I recompile the 2.6.18 kernel including the module Device
The motherboard supports a SATA drive but on bootup there is no entry
for it in /dev
If I recompile the 2.6.18 kernel including the module Device
Drivers/SCSI Device Support/Low Level SCSI Drivers/Serial ATA (SATA)
support the /dev has an entry for SDA and SDA1 BUT
during bootup irq is
On Wed, Mar 07, 2007 at 10:28:24AM -0500, Thomas H. George wrote:
When I boot from a grml-0.9 cd my dvdrw and cdrw drives are found on hde
and hdf. They are mountable and usable.
snip
I complied a kernel from Debian linux-source-2.6.18. On boot up the
system fails to find the dvdrw
When I boot from a grml-0.9 cd my dvdrw and cdrw drives are found on hde
and hdf. They are mountable and usable.
The grml release info says it is based on Debian and uses a vanilla
2.6.18-3 kernel with patches and additional modules.
I complied a kernel from Debian linux-source-2.6.18. On
On Wed, Mar 07, 2007 at 12:55:52PM -0500, Tom Pfeifer wrote:
Thomas H. George wrote:
When I boot from a grml-0.9 cd my dvdrw and cdrw drives are found on hde
and hdf. They are mountable and usable.
The grml release info says it is based on Debian and uses a vanilla
2.6.18-3 kernel
On Mon, Mar 05, 2007 at 10:42:11PM +1300, Chris Bannister wrote:
On Sat, Mar 03, 2007 at 04:21:18PM -0500, Thomas H. George wrote:
I built a new computer with two hard drives and installed XP Home
Edition on the first drive. The second drive contains my Debian system
- kernel 2.6.17
Without research I purchased the ECS KA3 MVP motherboard AMD Athlon 64
AM2 combo from NewEgg.
This seems like a very nice MB in many respects but I have encountered
two problems.
First, Standard CMOS Features does not list my dvdrw and cdrw drives.
There are two ide headers on the board
On Mon, Mar 05, 2007 at 04:32:12PM +, Joe wrote:
Thomas H. George wrote:
Without research I purchased the ECS KA3 MVP motherboard AMD Athlon 64
AM2 combo from NewEgg.
This seems like a very nice MB in many respects but I have encountered
two problems.
First, Standard CMOS Features
On Sat, Mar 03, 2007 at 11:19:53PM +0100, Joe Hart wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Thomas H. George wrote:
I built a new computer with two hard drives and installed XP Home
Edition on the first drive. The second drive contains my Debian system
- kernel 2.6.17
On Sun, Mar 04, 2007 at 12:47:50AM -0500, Kevin Mark wrote:
On Sat, Mar 03, 2007 at 04:21:18PM -0500, Thomas H. George wrote:
I built a new computer with two hard drives and installed XP Home
Edition on the first drive. The second drive contains my Debian system
- kernel 2.6.17
On Sat, Mar 03, 2007 at 04:21:18PM -0500, Thomas H. George wrote:
I built a new computer with two hard drives and installed XP Home
Edition on the first drive. The second drive contains my Debian system
- kernel 2.6.17 and Testing. I intended to use disc 1 of a Sarge
installation set
My new box has a cdrw drive and a dvdrw drive but there are no entries
for these devices in /dev.
My old box has similar devices and there are entries for them in /dev
and they are both soft links to scd0. There are also entries for hdc
and hdd which is reasonable as these devices are master
I built a new computer with two hard drives and installed XP Home
Edition on the first drive. The second drive contains my Debian system
- kernel 2.6.17 and Testing. I intended to use disc 1 of a Sarge
installation set as a rescue disk to access hdb and run lilo to convert
this box to a dual
On Sat, Mar 03, 2007 at 09:26:04AM -0500, Thomas H. George wrote:
I built a new computer with two hard drives and installed XP Home
Edition on the first drive. The second drive contains my Debian system
- kernel 2.6.17 and Testing. I intended to use disc 1 of a Sarge
installation set
I built a new computer with two hard drives and installed XP Home
Edition on the first drive. The second drive contains my Debian system
- kernel 2.6.17 and Testing. I intended to use disc 1 of a Sarge
installation set as a rescue disk to access hdb and run lilo to convert
this box to a dual
I just purchased an Epson V100 Photo Scanner but apparently the sane
epson backend does not support this model. As root scanimage -L finds
the scanner but the test scanimage image.pnm suggested in the sane man
page results in scanimage: sane_start: Invalid argument. I have set
SANE_DEBUG_DLL
On Sat, Feb 17, 2007 at 01:36:39PM -0800, Alan Ianson wrote:
On Sat February 17 2007 13:32, Thomas H. George wrote:
I just purchased an Epson V100 Photo Scanner but apparently the sane
epson backend does not support this model. As root scanimage -L finds
the scanner but the test scanimage
On Sat, Feb 17, 2007 at 05:24:03PM -0600, Ron Johnson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02/17/07 17:03, Thomas H. George wrote:
On Sat, Feb 17, 2007 at 01:36:39PM -0800, Alan Ianson wrote:
On Sat February 17 2007 13:32, Thomas H. George wrote:
I just purchased
My Epson Perfection 2400 Photo scanner has died and must be replaced.
The Epson 4990 is too rich for my budget and the Epson 4490 is not on
the Sane list of supported scanners? Has anyone had success with the
4490? Are there better choices in the $100-200 range?
Tom
--
To UNSUBSCRIBE,
The recent upgrade from mozilla to iceape is very nice indeed but it has
erased the localstart.html page.
Tom
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Purged hotplug and the problem went away. The apparently dead usb
socket is live and lsusb reports the device attached to it.
Tom
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
After struggling for a week with strange usb problems - posted xsane usb
problem - I believe my problem is a hardware problem. One usb socket
has failed: device not seen but device and hotplug ok if another usb
socket is used. Since I only have motherboard usb sockets I am
considering
Just did a large dist-upgrade on another computer. A message scrolled
by saying /etc/init.d/hotplug was found, please purge hotplug. Could
this be right? The apt-cache show hotplug description says hotplug can
now do almost everything but slice bread.
Tom
--
To UNSUBSCRIBE, email to
On Sat, Jan 13, 2007 at 01:26:47PM -0800, Andrew Sackville-West wrote:
On Sat, Jan 13, 2007 at 10:23:00AM -0500, Thomas H. George wrote:
A binary scan works, a color scan stalls the scanner.
A posting to sane-devel on 1/6/07 drew no responses.
The backend maintainer pointed out
A binary scan works, a color scan stalls the scanner.
A posting to sane-devel on 1/6/07 drew no responses.
The backend maintainer pointed out that If the USB system stalls, the
scanner can not get rid of it's data. I tried scanimage -B to increase
the buffer size but this did not help.
Until now my Athlon XP 1800+ has been adequate for everything I do. Now
I want to capture digital video from my video camera and burn it on CD's
or DVD's.
I tried reading the debian-user archives by subject but they are so
extensive it is slow going. Perhaps there is a better way to search
On Mon, Jan 01, 2007 at 11:05:57AM -0600, Hugo Vanwoerkom wrote:
Thomas H. George wrote:
Until now my Athlon XP 1800+ has been adequate for everything I do. Now
I want to capture digital video from my video camera and burn it on CD's
or DVD's.
I tried reading the debian-user archives
On Mon, Jan 01, 2007 at 02:42:22PM -0500, Douglas Tutty wrote:
On Mon, Jan 01, 2007 at 01:29:55PM -0600, Hugo Vanwoerkom wrote:
Thomas H. George wrote:
On Mon, Jan 01, 2007 at 11:05:57AM -0600, Hugo Vanwoerkom wrote:
Thomas H. George wrote:
Until now my Athlon XP 1800+ has been adequate
On Mon, Jan 01, 2007 at 02:20:47PM -0800, Kevin Ross wrote:
You didn't say what kind of camcorder you have. Is it a digital camcorder,
that you can download the video via FireWire or USB 2.0? Or does it only
have analog output that you must capture with a traditional video capture
card?
On Mon, Oct 30, 2006 at 09:35:40PM +1300, Chris Bannister wrote:
On Sat, Oct 28, 2006 at 09:13:36AM -0400, Thomas H. George wrote:
Now my Wacom Graphire 4 mouse moves in fits and starts. It worked
smoothly before the upgrade. The upgrade was from Debian Sarge with a
2.6.11 kernel
On Mon, Oct 30, 2006 at 07:57:08AM -0500, Thomas H. George wrote:
On Mon, Oct 30, 2006 at 09:35:40PM +1300, Chris Bannister wrote:
On Sat, Oct 28, 2006 at 09:13:36AM -0400, Thomas H. George wrote:
Now my Wacom Graphire 4 mouse moves in fits and starts. It worked
smoothly before
On Thu, Oct 26, 2006 at 01:42:44PM -0400, Thomas H. George wrote:
After a dist-upgrade from Sarge to testing and to a kernel built from
linux-source-2.6.17 my mice - one old fashioned ball mouse and one Wacom
Graphire mouse - only move in jumps and starts.Clearly there is
something
I have tried changing the Motion_Buffer from 256 to 0 with xsetwacom set
cursor Motion_Buffer 0. Result: Motion_Buffer is an unknown parameter.
My object is to correct the following problem resulting from the move
from Sarge to testing:
Now my Wacom Graphire 4 mouse moves in fits and
After a dist-upgrade from Sarge to testing and to a kernel built from
linux-source-2.6.17 my mice - one old fashioned ball mouse and one Wacom
Graphire mouse - only move in jumps and starts.Clearly there is
something wrong with my setup but I am having difficulty finding the
fault. I
Somewhere I have seen an option to change the mouse position between
relative and absolute but I can no longer find it. Can someone tell me
where it is?
Tom
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
modprobe wacom results in:
wacom: version magic '2.6.16Jun03 preempt K7 gcc-4.1' should be
'2.6.16Jun03 preempt K7 gcc-3.3'
FATAL: Error inserting wacom
(lib/modules/2.6.16Jun03/kernel/drivers/usb/input/wacom.ko): Invalid
module format.
Background: The box was Sarge with a 2.6.11
I forgot that I had encountered a problem when I first attached the
wacom pad which I ultimately solved by editing the xorg.conf file to add
the following sections:
Section InputDevice
Identifier stylus
Driver wacom
Option Device
Add me to the list of devoted Debian users. I mailed a donation of $50
this morning. I hope it helps.
Tom
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Tue, Sep 19, 2006 at 09:07:05PM -0400, Roberto C. Sanchez wrote:
On Tue, Sep 19, 2006 at 08:48:24PM -0400, Thomas H. George wrote:
Are there any good Spanish Lesson Programs that run on linux? I can
shutdown and reboot to Windows but I hate to do it.
Not sure what your requirements
Are there any good Spanish Lesson Programs that run on linux? I can
shutdown and reboot to Windows but I hate to do it.
Tom George
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
If, when fetchmail finishes downloading a batch of mail, I immediately
run mutt it displays only a few messages - and these may actually be
from a previous download. In time - measured in hours, not minutes - a
re-run of mutt will display a large batch of messages retrieved by
fetchmail much
p wrote:
On Fri, Jul 14, 2006 at 12:08:56PM -0400, Alec Berryman wrote:
Fetchmail is downloading messages but mutt is not displaying them? I
have not changed any settings and I saw nothing in the latest
dist-upgrade of testing which related to mutt. What can have gone
wrong?
Fetchmail is downloading messages but mutt is not displaying them? I
have not changed any settings and I saw nothing in the latest
dist-upgrade of testing which related to mutt. What can have gone wrong?
Tom George
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
If gdm is started with the mouse on the wacom tablet, the mouse wont
work. If gdm is started with the mouse off the tablet and the mouse is
placed on the tablet after the sign in screen is displayed it will
work. This is with a debian testing box and a 2.6.15 kernel.
I discovered this about
On Sat, Jul 08, 2006 at 11:47:16AM +0200, LeVA wrote:
2006. július 7. 16:11,
Thomas H. George [EMAIL PROTECTED]
- debian-user@lists.debian.org,:
On Thu, Jul 06, 2006 at 10:26:28PM +0200, LeVA wrote:
[...]
When my daughter who is still wedded to windows listens to this
station
On Sat, Jul 08, 2006 at 05:52:25PM +0200, LeVA wrote:
2006. július 8. 16:49,
Thomas H. George [EMAIL PROTECTED]
- debian-user@lists.debian.org,:
On Sat, Jul 08, 2006 at 11:47:16AM +0200, LeVA wrote:
2006. július 7. 16:11,
Thomas H. George [EMAIL PROTECTED]
- debian-user
On Thu, Jul 06, 2006 at 10:26:28PM +0200, LeVA wrote:
[...]
When my daughter who is still wedded to windows listens to this station
on line there is a continually changing light show in the window as the
music plays. This makes me think that somehow my setup is incomplete.
[...]
On Wed, Jul 05, 2006 at 06:37:12PM +0200, LeVA wrote:
2006. július 5. 18:17,
Thomas H. George [EMAIL PROTECTED]
- debian-user@lists.debian.org,:
Hi Tom!
Using the mplayer plugin for mozilla I listen to a fm radio station on
line. The sound is fine but mplayer occupies a large gray
Using the mplayer plugin for mozilla I listen to a fm radio station on
line. The sound is fine but mplayer occupies a large gray window. When
my daughter who is still wedded to windows listens to this station on
line there is a continually changing light show in the window as the
music
On Sun, Jul 02, 2006 at 10:05:37PM -0400, Hubert Chan wrote:
On Sun, 02 Jul 2006 12:41:00 -0400, Thomas H. George [EMAIL PROTECTED]
said:
With Etch it is recognized as SCSI device sdb and located at /dev/sg1.
It cannot be mounted, mount fails with a message that /dev/sg1 is not
a block
On Mon, Jul 03, 2006 at 12:11:16PM -0400, Hubert Chan wrote:
On Mon, 03 Jul 2006 08:29:09 -0400, Thomas H. George [EMAIL PROTECTED]
said:
On Sun, Jul 02, 2006 at 10:05:37PM -0400, Hubert Chan wrote:
On Sun, 02 Jul 2006 12:41:00 -0400, Thomas H. George
[EMAIL PROTECTED] said
I start mplayer from mozilla and listen to a radio station not available
locally - works perfectly.
There is a hitch though. If mozilla is stopped there is no longer a
window for mplayer. I stop it from a console by getting its pid and
killing it. This works but shouldn't there be a better
I cannot access my Jumpdrive from a Etch box with a 2.6.15 kernel.
I have successfully used this Lexar 256 MB Jumpdrive Pro (usb 2.0) with
Sarge box and a 2.6.11 kernel compiled from source.
With Sarge it is recognized as SCSI device sda and located at
/dev/sda1. It can be mounted and has a
On Tue, Jun 27, 2006 at 10:22:00PM +0200, LeVA wrote:
2006. június 27. 20:30,
Thomas H. George [EMAIL PROTECTED]
- debian-user@lists.debian.org,:
Gimp 2.2 has forgotten that I have a printer. Actually I have two both
defined in Cups and working from a console, from Xsane and from
401 - 500 of 810 matches
Mail list logo
