: Wednesday, August 23, 2006 3:51 PM
To: debian-user@lists.debian.org
Subject: Re: Debian ATI Radeon X300 don't mix? (errata corrige)
Yu,Glen [Ontario] ha scritto:
Hi,
Now that my NIC is working, it's time that I bring up the next issue
with my new PC: the ATI video card. When I bought this PC
On Tue, Aug 22, 2006 at 11:13:07AM -0400, Yu,Glen [Ontario] wrote:
Hi,
Wow, it's great that your Marvell NIC worked with Sarge right out of
the box, but I'm not as lucky. Googling shows that a lot of people has
similar problems as I do...
Well, my ASUS board is the P5GD2-X and uses
Title: Debian ATI Radeon X300 don't mix?
Hi,
Now that my NIC is working, it's time that I bring up the next issue with my new PC: the ATI video card. When I bought this PC, I had SuSE on my mind (which is what I used to use on my old PC and my laptop), but I started to like using Debian
Bloch [mailto:[EMAIL PROTECTED]
Sent: Monday, August 21, 2006 10:53 AM
To: Yu,Glen [Ontario]
Cc: debian-user@lists.debian.org
Subject: Re: Debian support for Marvell Yukon Gigabit Ethernet NIC?
#include hallo.h
* Yu,Glen [Ontario] [Mon, Aug 21 2006, 09:52:26AM]:
Hi everyone,
Over the weekend I
: Tuesday, August 22, 2006 10:36 AM
To: debian-user@lists.debian.org
Subject: Re: Debian support for Marvell Yukon Gigabit Ethernet NIC?
Yu,Glen [Ontario] wrote:
Hi,
I've tried compiling it into the kernel, as a module (module loaded but still
no eth0), and tried the other modules as well, but none
Title: Debian support for Marvell Yukon Gigabit Ethernet NIC?
Hi everyone,
Over the weekend I decide to put Debian on my new PC at home, and while it was detecting hardware, it said it couldn't find the proper driver for my NIC (Marvell Yukon Gigabit) that's onboard my ASUS MB (P4P800?? I
for Marvell Yukon Gigabit Ethernet NIC?
Yu,Glen [Ontario] wrote:
I recompiled the kernel and...still
nothing -- ifconfig only shows the loopback and no eth0.
Hello,
Silly question, but did you compile it in as a module? If so, did you
load said module?
Best regards,
--
George Borisov
Title: Exim4 send/receives local and inter-organizational mail, but not to/from outside e-mails
Hi everyone,
We are running Debian 3.1 Sarge on a Dell PowerEdge 2800 server, and I was configuring Exim4 to send/receive e-mails. It was the first going through the procedure, as we've always
Title: Any recommendations on open source MUAs that can allow to read Microsoft Exchange Server e-mails?
Hi everyone,
I'm trying to look for an e-mail client that can allow me to check Microsoft Exhange Server e-mails. I googled the topic and XFMail was suggested, but when I tried it, it
I would just like to add that since you're install it on an Intel-based
machine, the i386 architechture would be a safe bet.
Cheers,
-Glen
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Friday, August 11, 2006 11:24 AM
To: debian-user@lists.debian.org
Hi everyone,
We have a Dell PowerEdge 2800 server that uses a PERC 4e/Di RAID controller.
In the 2.4.27 kernel, it used the megaraid2.ko but in the Debian
2.6.8-3-686-smp kernel, the name megaraid2.ko is no longer used because of some
name changes to the module from 2.4 to 2.6. However, the
Hi everyone,
I was running a custom 2.4 kernel on my laptop (Dell Inspiron 4000; P3 800Mhz)
and recently decided to upgrade it to the most recent 2.6 kernel (2.6.16.14
from www.kernel.org). It compiled successfully, however after rebooting with
the new kernel, I realized my laptop didn't have
I use AntiVir. It's free!
http://www.free-av.com/
--
Glen Yu | 416-739-4861 | [EMAIL PROTECTED]
--
-Original Message-
From: lmyho [mailto:[EMAIL
Hi everyone,
This is a question about GRUB not on Debian, but SuSE. I just felt that this
is not really a Debian-specific topic so I decided to ask here so don't flame
me if you don't like it..
First of all, I don't really like splash screens/pics during boot and would
rather see the details
Yu | 416-739-4861 | [EMAIL PROTECTED]
--
-Original Message-
From: Mike McCarty [mailto:[EMAIL PROTECTED]
Sent: Wednesday, April 19, 2006 12:43 PM
To: Yu,Glen [Ontario]
Cc: debian-user@lists.debian.org
Subject: Re: System
Hi,
We had a similar problem with our Dell PE2800 recently. At the moment, you
have no choice but to install with the default 2.4.27 kernel and then compile
your own 2.6 kernel afterwards.
HTH
-Glen
Btw, can you do a cat /proc/cpuinfo on your system and tell me how much cache
it sees
When you do make oldconfig, it just takes all the settings from your existing
kernel (or the one you used to make .config with) and transfers them directly
to the new kernel that you want to upgrade to. If there are new
options/settings available in the new kernel (and there probably will be),
Well said.
And it's not just the UK. That's how it is in Canada as well. I'm not the
type to keep score, but I believe its 2-1 now?
Cheers,
-Glen
--
Glen Yu | 416-739-4861 | [EMAIL PROTECTED]
Hello everyone,
I'm trying to get my IDE CD-RW drive to work on Debian 3.1 (with
2.4.27-2-686-smp kernel). cdrecord -scanbus shows the MegaRAID controllers on
0,0,0 and 0,1,0, and none of the entries include my CD-RW. If I were to do
cdrecord -scanbus dev=ATAPI:, it shows my CD-RW, but also
What's the output when you do: dmesg | grep -i scsi ? If possible, can you
post it?
--
Glen Yu | 416-739-4861 | [EMAIL PROTECTED]
--
-Original
Hello everyone,
I was wondering if it's possible to copy the vmlinuz-x.y.z from one machine to
another and have the other machine run properly with it. Here's the scenario:
I have 2 systems, both running Debian 3.1 (Sarge), and their hardware is a
little different from each other. Suppose
Hello everyone,
In the very beginning, our intention was to install Debian 3.1 Sarge with the
2.6.8 kernel (via 'linux26' at install prompt) on our Dell PowerEdge 2800
server, but at the step in the installation process where it was suppose to
partition the hard disks, it gave an error citing
Subject: Re: How do I make a bootable cd?
Yu,Glen [Ontario] wrote:
Hi,
I'm looking to back up my kernel and make a bootdisk prior to recompiling the
kernel, but we don't have a floppy on our system and hence can't use mkboot.
We do, however, have a CD-RW, so I was wondering what the mkboot
Hi,
I'm looking to back up my kernel and make a bootdisk prior to recompiling the
kernel, but we don't have a floppy on our system and hence can't use mkboot.
We do, however, have a CD-RW, so I was wondering what the mkboot-equivalent is
for making a bootable cd?
Thanks,
-Glen
Hi,
Our Debian 3.1 (2.4.27-2-686-smp kernel) server contains (among other things)
4x2GB sticks of RAM giving us a grand total of 8GB, however, free and cat
/proc/meminfo sees roughly only 4GB:
output of free:
total used free sharedbuffers cached
Mem:
Hi everyone,
This is kind of long, so bear with me...
I have used Linux (FC, SuSE, and recently Debian 3.1) for many years in the
past, but have never actually done and modification/configuration of the
kernel, and would like some pointers/tips or maybe a useful link to a guide
which give
PROTECTED]
--
-Original Message-
From: Matt Zagrabelny [mailto:[EMAIL PROTECTED]
Sent: Friday, March 24, 2006 1:58 PM
To: debian-user@lists.debian.org
Subject: Re: Memory trouble
On Fri, 2006-03-24 at 13:28 -0500, Yu,Glen
Interestingly enough, I was just looking into a similar thing yesterday. I
have yet to try it out, but here's the info:
Server:
Use apt-get install vcnserver to get vcnserver
Run vncpassword to setup a password which will be encrypted and saved in
~/.vnc/passwd
Run vncserver
Client:
On a
Integration Research Section
Science and Technology Branch
Environment Canada
4906 Dufferin St., Downsview, ON, M3H 5T4
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
David Kirchner
Sent: Wednesday, March 08, 2006 2:28 PM
To: Yu,Glen [Ontario]
Cc: debian-user
Hi,
I've recently installed Debian 3.1 (2.4.27 kernel) on a Dell PowerEdge 2800
server w/dual Xeon 3.6GHz Processors and 2MB L2 cache per processor core,
however when I do cat /proc/cpuinfo, it gives shows that I only have 1
processor and 16k cache:
snippets of /proc/cpuinfo
and sees only 16k
cache =(
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wed, 8 Mar 2006 10:22:04 -0500
Yu,Glen [Ontario] [EMAIL PROTECTED] wrote:
Hi,
I've recently installed Debian 3.1 (2.4.27 kernel) on a Dell
PowerEdge 2800 server w/dual Xeon 3.6GHz Processors and 2MB L2 cache
per
Hi everyone,
I'm trying to install Debian 3.1 (2.6.x kernel) onto a Dell PowerEdge 2800
server (yes, I know they support only Windoze RH) and it gave an error during
the detecting hard drives/partition part of the install process. It said that
no partitions were found and asked me to make
not detecting my hard drives =(
Yu,Glen [Ontario] wrote:
Hi everyone,
I'm trying to install Debian 3.1 (2.6.x kernel) onto a Dell PowerEdge 2800
server (yes, I know they support only Windoze RH) and it gave an error
during the detecting hard drives/partition part of the install process
Message-
From: Joris Huizer [mailto:[EMAIL PROTECTED]
Sent: Friday, March 03, 2006 2:56 PM
To: debian-user@lists.debian.org
Subject: Re: Debian 3.1 installation not detecting my hard drives =(
Yu,Glen [Ontario] wrote:
Hi,
Thanks for your reply Jorge, but I've already tried that ISO before
-user@lists.debian.org
Subject: Re: Debian 3.1 installation not detecting my hard drives =(
Yu,Glen [Ontario] wrote:
Hmm...I think there's some confusion here, so allow me to clear things up a
little.
1) I am trying to install Debian 3.1 Sarge (at the moment I don't care which
kernel
Hi everyone,
I'm plan on installing Debian 3.1 (2.4.27 kernel) on a Dell PE2800 server soon
(just waiting for a few more pieces of equip. to arrive) and while I have used
Debian a little bit in the past, I've never installed in on a server before. I
was hoping somebody who has done this
Hi everyone,
Recently I tried using monit (http://www.tildeslash.com/monit), but I'm unable
to view my processes or check my server status as described on the site. I can
access my page that is running from apache2, but if I add the :2812 at then
end, the Firefox (and IE) tells me they can't
Hi everyone,
I've googled this but never actually got a definite answer...
What I want to know is: What filesystems does lvm (or lvm2) support?
Cheers,
-Glen
@lists.debian.org
Subject: Re: Cannot change Apache2 ServerName/ServerAlias
El Mon, 06-02-2006 a las 16:47 -0500, Yu,Glen [Ontario] escribió:
I'm having trouble changing the ServerName ServerAlias to look up my page.
Have you addded a line in /etc/hosts to point newpagename to your IP
address
ServerName/ServerAlias
On Tue, Feb 07, 2006 at 12:08:19PM -0500, Yu,Glen [Ontario] wrote:
I'm still having trouble trying to access my page through an alias
Here's what I've fixed/done so far:
1) changed ServerName http://server to ServerName server
2) used the a2ensite tool to enable the site
Did
I'm having trouble changing the ServerName ServerAlias to look up my page.
I'm running Debian 3.1 with 2.4.x kernel on an old Dell laptop, however, I can
only access my page via http://server but not as something else (i.e.
http://newpagename). This is what I have at the moment inside
41 matches
Mail list logo