Hit this crash sometime during apt-get upgrade. The avahi-daemon was
running but not taking 100%. Set LogLevel=debug2 and attempted a print
operation, no failure.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to cups in Ubuntu.
Public bug reported:
Last update to this Quantal Beta install was to update these packages
libgdk-pixbuf2.0-common libglib2.0-0 libldap-2.4-2 libnss3 nautilus-data
gnome-settings-daemon libatk-bridge2.0-0 libdrm2 libgdk-pixbuf2.0-0
Had not seen this error prior.
ProblemType: Bug
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1040024
Title:
Nautilus crashes, trap int3 on start from launch bar
Status in “nautilus” package in Ubuntu:
New
Bug description:
This is the System Log entry from above failure
cliffsyx kernel: [ 1422.814780] nautilus[2639] trap int3 ip:7f12cdd56e89
sp:7fff9940d290 error:0
These are the messages from starting nautilus from the command line
cliff@cliffsyx:~$ nautilus
Fontconfig warning:
Since the system was unuseable reinstalled with the 08/24/12 daily build
of 12.10. Have not seen this problem on this level.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1040024
Produced this failure in LibreOffice Impress when exiting edit of a
chart.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1042187
Title:
soffice.bin crashed with SIGSEGV in
Public bug reported:
Adding addition data points to a presentation chart failed. The
LibreOffice-calc Data Table opened, added the new row but can't close
the table. The application appears to be stuck inputing the new
information.
ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package:
Used the System Monitor to end the officebin process since there was no
way to close the LibreOffice calc window. Started LibreOffice Pres
again, when through a sucessful recovery, and opened edit on the data
for the chart. The new data was in the table but again in the situation
that there was
The get into the condition start LibreOffice Impress, load the attached
document, edit the first chart (Electric Usage), and edit the data.
This bring up the Data Table window but there is no way that I can close
the window out after doing the edits. Will attach a screen shot of this
condition.
** Attachment added: Screen shot of failing condition
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1074311/+attachment/3421994/+files/Screenshot%20from%202012-11-02%2015%3A08%3A24.png
--
You received this bug notification because you are a member of Desktop
Packages, which is
The lo-menubar package is not installed.
cliff@cliffhp:~$ sudo apt-get remove lo-menubar
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package 'lo-menubar' is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 2 not
Removed libreoffice-gtk and retried the presentation. It certain had a
different look and feel (fonts and windows) but still had the Data Table
window banner without a way to close the window. Don't recall if I
tried a right click to open the select box but with this attempt did
that and was
libreoffice-gtk3 was not installed. Just to try something, re-
installed libreoffice-gtk and still had the problem. Installed
libreoffice-gtk3 and still had the problem. Removed libreoffice and
installed the PPA level, still have the problem.
In all cases above doing right click and select
Had this problem on two different 12.10 but both built with a release
upgrade from 12.10 beta. Updated one of the systems from the 12.10
distribution level of 12.10 and the problem does not exists.
--
You received this bug notification because you are a member of Desktop
Packages, which is
Reproduced the problem on the system that was updated to 12.10
distribution by installing GNOME3.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1074311
Title:
Can't close Data
Added
add-apt-repository ppa:gnome3-team/gnome3
to the repository and after update the Data Table banner lacks a close
option.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
Ok, GNOME3 was not the cause, still had the problem after removing.
Went back and determined things changed since installing 12.10
distribution. Found that the real cause is the theme you are using. If
you set Adwaita or High Contrast or High Contrast Inverse the Data Table
banner looses it's
Removal of the AC power cord will cause my older HP Laptop to go into
hibernation even when the battery is fully charged.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-power-manager in Ubuntu.
Public bug reported:
Been having problems getting any 14.10 build (Gnome and Unity) to boot
on this desktop. Submitting problem report on Unity since seems easist
to document. I downloaded the Ubuntu 14.10 daily build dated 8/29/14
and went through the install process without any problem.
Public bug reported:
This is one of two problems I'm seeing on the Gnome version of 14.10.
Since there is a boot problem using the normal process (the first
problem) I've boot systemd with init=/lib/systemd/systemd rather than
using normal upstart boot. The system comes up but trying to open the
Public bug reported:
Running 13.04 and unable to keep gedit up. Syslog enter (kern.log)
shows
traps: gedit[3976] trap invalid opcode ip:7f26c3131d7c sp:7fff9c3aa370
error:0 in libgtksourceview-3.0.so.0.0.0[7f26c3104000+71000]
ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: gedit
*** This bug is a duplicate of bug 1121631 ***
https://bugs.launchpad.net/bugs/1121631
Running Firefox and VLC (radio streaming) and saw no external indictions
of any problems.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to
Crash occurred while the system was processing an sudo upgrade.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gdm in Ubuntu.
https://bugs.launchpad.net/bugs/1207600
Title:
gdm-session-worker crashed with signal 7 in
Public bug reported:
When displaying a web page some single characters are garbage. This is
most noticable when displaying pages like Facebook when there are a
number of page application causing the page text to be re-written. If
you have a lot of this re-write activity you can see random
Public bug reported:
Consistant Segmentation fault in users-admin during termination.
System log entry
Sep 23 09:21:37 cliffsyx kernel: [ 7296.047153] traps: users-admin[8934]
general protection ip:414f7c sp:75fd4890 error:0 in
users-admin[40+22000]
ProblemType: Bug
DistroRelease:
apport information
** Attachment added: BootLog.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943504/+files/BootLog.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
I see two, what I though were related, 13.10 problems on my Laptop
(reported this bug on that system) and my desktop. The first, as
reported in this bug, is single characters becoming garbage which can be
corrected by causing that character to be refeshed (ie; marking the word
with the mouse).
apport information
** Attachment added: GconfCompiz.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943508/+files/GconfCompiz.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
apport information
** Attachment added: ProcModules.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943513/+files/ProcModules.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
apport information
** Attachment added: BootDmesg.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943503/+files/BootDmesg.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
apport information
** Attachment added: Lsusb.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943510/+files/Lsusb.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
apport information
** Attachment added: DpkgLog.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943507/+files/DpkgLog.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
apport information
** Attachment added: Lspci.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943509/+files/Lspci.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
apport information
** Attachment added: CurrentDmesg.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943505/+files/CurrentDmesg.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
apport information
** Attachment added: Dependencies.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943506/+files/Dependencies.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
apport information
** Attachment added: ProcInterrupts.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943512/+files/ProcInterrupts.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
apport information
** Attachment added: xdpyinfo.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943519/+files/xdpyinfo.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
apport information
** Attachment added: UdevLog.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943515/+files/UdevLog.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
apport information
** Attachment added: Xrandr.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943518/+files/Xrandr.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
apport information
** Attachment added: ProcCpuinfo.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943511/+files/ProcCpuinfo.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
apport information
** Attachment added: UdevDb.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943514/+files/UdevDb.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
apport information
** Attachment added: XorgLogOld.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943517/+files/XorgLogOld.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
apport information
** Attachment added: XorgLog.txt
https://bugs.launchpad.net/bugs/1214051/+attachment/3943516/+files/XorgLog.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
Christopher, I installed today's daily build of Gnome 14.04 on my
laptop. I see no indication of either problem (bad single characters or
blank rectangles) with this system. I don't need any fix for 13.10
since this is only a display problem and doesn't stop me from any task I
want to do. I had
Cannot add the local shared printer to another system. The remote
system doesn't see the network printer. Error log on the print server
shows that cups process dnssd had a problem.
E [13/Oct/2013:10:04:59 -0400] [cups-deviced] PID 5363 (dnssd) stopped with
status 1!
E [13/Oct/2013:10:05:39
Public bug reported:
Installed daily build of gnome 14.04 dated 12/17 can not share
directories. Getting
'net usershare' returned error 255: net usershare add: cannot convert
name Everyone to a SID. Access denied.
Copied a unmodified version of smb.conf from my 13.10 system, ran sudo
service
See the same problem with Osmo. Starting Osmo from the command line the
Pipelight plugin gets called. Have a backtrace after stopping after
entering Pipelight's basicplugin.c routine attach(). Shows Osmo GUI
calling webkit - g_object - g_type_create - g_module_open -
_dlerror_run - dl_open_doit
forgot to add the Osmo bug. See bug 1297872 for details.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to empathy in Ubuntu.
https://bugs.launchpad.net/bugs/1289239
Title:
emapthy loads ./mozilla/plugins on chat start
Status in
Public bug reported:
Been having boot hangs for a couple of months on 14.04. Appears to be a
display problem (black screen or hang before logon). Removed quiet
splash from linux boot command but still occurs. Added only
nomodeset and the problem appears much less frequently. Noticed poor
** Attachment added: output from beta1 14.04 system
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1294643/+attachment/4032282/+files/lshw_14_04.txt
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
Reinstall 14.04 from the 3/18/14 gnome daily build and do not see the
above problem. Have rebooted and no hangs have occurred. The lshw -c
display is as expected (no UNCLAIMED). Display appears normal.
--
You received this bug notification because you are a member of Desktop
Packages, which
Installed Gnome 16.10 and the problem still exists.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1549269
Title:
Closing the Location Options menu will hang the Nautilus window
Public bug reported:
Selecting the option Invert Selection in the Nautilus window will cause
a system hang which frees up after a minute or so but the Nautilus
window continues to be non-responsive and must be Forced out.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: nautilus
Tried two different folders selecting one file and then Invert
Selection. Had the system monitor running and saw that for over a
minute all four processors were running around 50%. Couldn't access
anything in the system for over a minute.
--
You received this bug notification because you are a
Yes, occurs on every directory I've tried so far.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1549269
Title:
Invert Selection in Nautilus Window causes hang
Status in nautilus
Another test...open Home, open the Locations option menu, close the menu
(click on the Nautilus window) and the system will go unresponsive. All
processors running about 50%. Had to force close Nautilus.
--
You received this bug notification because you are a member of Desktop
Packages, which
OK, maybe not the Invert Selection. I got it to fail if I went to a
directory selected two files and opened the Locate Options menu selected
nothing and then closed the menu by clicking on the Nautilus window.
The CPU activity went to about 50% for all processors but this only
lasted about 10-15
Although the system is up-to-date if other people can't see this error
will rebuild from daily build unless there is something I should try on
this failing system.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
Need some instruction on how to bring up a Unity session. Also can't
find out how to login to a Guest ID or enable a Guest ID. Here is what
I have tried.
- started a 15.10 gnome system using the same /home directory structure...no
problems noticed
- created a new Standard user under the 16.04
Just trying gather more info. Was watching the processor usage with top
and saw that when I closed the Location Options menu Nautilus and gnome-
shell were to top tasks running both around 50%. Only xorg was doing
anything (about 9%).
--
You received this bug notification because you are a
Rebuilt the system with the Gnome 16.04 Daily Build for 2/25. The
problem continues to occur when I try to open and close the Locations
Option menu in Nautilus.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
** Summary changed:
- Invert Selection in Nautilus Window causes hang
+ Closing the Location Options menu will hang the Nautilus window
** Description changed:
- Selecting the option Invert Selection in the Nautilus window will cause
- a system hang which frees up after a minute or so but the
The right most button on the Nautilus toolbar. Used the term Location
options because when you mouse over the button that's it's title.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
Need help debugging this problem. Have a debug version of nautilus and
get it up and reproduce the loop but don't have enough gdb experience to
understand where this loop is taking place. Did find using the
NAUTILUS_DEBUG environmental variable you can stop and examine the
threads (4 in most
Install nautilus 3.18.5 and the high cpu problem is gone but the
"location option" menu appears to be incomplete. Missing some of the
select options (invert selection) and the call to open a shell.
--
You received this bug notification because you are a member of Desktop
Packages, which is
Have built a debug version of nautilus 3.14.3 but not being gdb fluent
don't know how to stop the loop condition to see where it is occurring.
Did place a breakpoint in the nautilus.toolbar.c where the button click
gets control and saw the gdb indicate at that location but the system
was locked up
Thanks, didn't look around much just determined that closing the menu
didn't cause a loop between nautilus and gnome-shell. Screw up the
removal of 3.18.5 or the re-installation of 3.14.4 but had to rebuild
the system to recover. Just for my own interest still trying to
understand where this
Trying to understand how the Location Options menu is closed and found
in nautilus-toolbar.c a call to gtk_menu_shell_deactivate in function
gear_menu_key_press. This gtk call is used to remove the menu. Don't
know what the problem could be but the external symptoms of a high cpu
loop between
The update to Nautilus 1:3.20.1-0ubuntu2 has remove this problem
although there is no menu pull-down that contains "Invert Selection".
The CTL-Shift-I does provide this function.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus
Public bug reported:
Unable to control the gallery background color. When starting Shotwell
the background is black even though the preferences are set to a medium
gray. With the preference window open changing the background color
does nothing except when it's move to the white side the tags
Running 16.10 Gnome and regularly suspend the laptop. The background
picture turns into random rectangles on a black ground. No other
problems noticed. Restoring the same picture via right-click on the
desktop work until the next suspend.
--
You received this bug notification because you are
Public bug reported:
Running firefox 50.1 on gnome 17.04 and every restart of firefox I have
to reset my homepage. Tried the normal way by dragging the current tab
to the homepage icon and manually editing prefs.js to the wanted
homepage. Once set the homepage setting is held until firefox
Public bug reported:
Consistent memory leak during normal use. Seen increase in the firefox
task memory use from <500 met to over 3 gig. Attaching an output of
pidstat showing steady increase over the day.
ProblemType: Bug
DistroRelease: Ubuntu 17.04
Package: firefox 50.1.0+build2-0ubuntu1
See this failure every day at different times after boot. When it
starts to fail every cell copy/paste will fail. Just because I don't
know what to do next and I know there is a memory leak problem with
gnome-shell I got into the failing condition and issued "gnome-shell
--replace" and the next
Simplified failure description...
Mark a single cell that has data and formula. Hit ctl-c once, move to an open
cell and hit ctl-v. When this is failing the data in the marked cell is copied
to the new cell but not the formula.
Unmark the cell by marking any other cell and then mark the
Tried many times to reproduce this problem since my last append and it
did come back. There are three methods to copy/paste. Using
ctl-c/ctl-v, the copy/paste icons, and the edit pull-down. Each method
results in the same failure. I mark a number of cells to be copied, do
the copy, move to a
Public bug reported:
When doing a copy/paste of rows only the text information is copied (a
"Text Import" dialog box is displayed which normally wasn't before). If
the copy/paste operation is repeated than the text and calculations are
copied. In fact if the copy (ctl-c) is hit twice and then
Interesting. Tried again on my laptop to do a copy/paste and had the
failure. Marked the cells to be copied and hit ctl-c. Moved to open
area and hit ctl-v and this opened a "text import" box (which is not
normal) and after hitting OK the cells where copied but did not include
any calcs. Have
That should be Keepass2. Keepassx is the older version.
** Package changed: libreoffice (Ubuntu) => keepass2 (Ubuntu)
** Summary changed:
- Libreoffice copy paste doesn't copy calculations
+ Keepass2 on Zesty causes copy/paste problem in other applications
--
You received this bug
It appears that there is a problem using Keepassx in Zesty. I have been
using Keepassx across many release of Ubuntu and not seen this problem.
I can reproduce the problem above by just having the Keepassx window
open (all Keepassx setting are at default). This now makes sense for the
problem
gnome-shell has nothing to do with this problem. Replaced the Ubuntu
Gnome system with Ubuntu Unity and continue to have the problem in the
spreadsheet, in fact fails more consistently. Could almost agree that
this is a hardware problem if there were not so many ways to do the
copy/paste using
This is not a problem in Zesty Unity. Have two Zesty Gnome system that
will not retain their home page.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
https://bugs.launchpad.net/bugs/1676463
Title:
Unable to keep
Public bug reported:
Intermittent problem shows up as the desktop background partially opens
after login and then freezes. After a short pause the screen clears and
goes back to the login screen. Logging in again will result in a
working system. Add the file PartialDT.txt which is the syslog
I see nothing for this time/date (2017-09-21 05:35) in the /var/crash.
The system didn't indicate there was a problem only saw a partial
desktop background screen for 10-20 seconds then the screen when back to
the login screen again.
--
You received this bug notification because you are a member
This is no longer a problem in my environment. Don't recall which
release or update fixed it. Now running 18.10.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/780782
Title:
Unable to
Running Ubuntu 18.10 and Nautilus at
+++-===-==-==-===
ii nautilus1:3.26.4-0ubun amd64 file manager and
graphical shell for GNOME
and the NFS volumes again showing up on the desktop when the
Don't recall seeing this problem on any subsequent releases of Ubuntu.
Now running 18.10.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1354596
Title:
Internal Server Error accessing
Public bug reported:
Have several NFS volumes that I mount and unmount. Have always seen the
volume ICON show up on the desktop and the nautilus shortcut panel but
this is no longer occurring in 18.04. The mount is available. Have
verified that the tweaks-ui setting is ON for mounted volumes.
Seen this problem twice when going to Settings-Devices-Printer. The
Settings window and the apport error is displayed. The second time
Settings-Devices-Printer is selected the Printer selection window
appears.
--
You received this bug notification because you are a member of Desktop
Packages,
The prior attempt to install was with a USB. Create a bootable DVD with
the same daily build level and the install process failed at the same
location, right after the Who are You? screen. Couldn't get to the
syslog because the install process was no longer responding so could not
verify the
Trying to install daily build 3/1/18 and seeing the install window close
(no error indicated) right after collecting user data from the Who are
You screen. Checking the syslog on the install system found this error
as the last entry.
--
You received this bug notification because you are a
Can get a consistent memory error by opening gedit from a command line
and then adding 3 small text files (have three tabs open). Then using
the window close terminating the gedit window. Get one of two error
indications but no error processing.
cliff@cliffps:~$ gedit
malloc_consolidate():
Added the three debug ddebs and re-ran the test with valgrind. Just as
a note calling gedit and only adding a single text file will also fail
with a memory error. Have a second system also running 19.04 which also
appears to fails the same way with gedit.
** Attachment added: "valgrind.log"
Created Bugzilla bug report 128151 per request.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1846940
Title:
Loop in libreoffice-calc when scrolling to top of spreadsheet
Public bug reported:
Install recent version of 19.10 daily build. All is well but can't set
a static route for my wired ethernet. Going to Settings-Network-Wired
tried to fill in IP Address/NetMask/Route and although all appears to be
correct the Apply button is never activated to set the
Found an additional spreadsheets that fail. Appears to be associated
with a user defined button/macro. In the TheGrid sheet the button/macro
is placed near the top of the sheet so the failure occurs when I scroll
to the top of the sheet. In the case of another sheet the button/macro
os down
Public bug reported:
Have a spreadsheet used in many past release of calc that is now
failing. When opening this sheet and if not currently at the top of the
sheet using the mouse wheel to move to the top (top line to the top of
the window) soffice.bin goes to 100% cpu and stays there. Can't
The work around indeed worked for me but when I tried to recover my
Bookmarks from an archive file after pressing "Choose a file" chromium
terminated. Think this message in syslog is associated with the error:
Feb 15 13:17:54 cliffps chromium_chromium.desktop[6306]:
Public bug reported:
Have a simple two item chart and when I try to add rows to the data
table the columns expand. Display the data table and try to move the
cursor to the bottom so that I can add a row and as soon as I go to the
second row two empty columns are added. When I get to the bottom
Install Office Impress V6.4.2.2 and the problem still exists.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1863785
Title:
Error adding rows to data table
Status in libreoffice
1 - 100 of 120 matches
Mail list logo