[Desktop-packages] [Bug 1586528] Re: Avahi-daemon withdraws address record
I am also seeing this same problem on a Raspberry Pi4 4GB. I purchased the Pi last November and installed from the then-available 2019-09-26-raspbian-buster.zip but routinely keep it updated (apt update / apt upgrade). The Pi was rock solid and did not exhibit any problems until 2020-02-24 when I applied some updates followed by a "sudo reboot" but the boot process did not complete. The Pi runs headless so I don't know whether it never actually completed the shutdown, or failed to reboot. I power- cycled the device and it came back OK. Another set of updates were applied on 2020-03-11 and the subsequent reboot completed without incident so I assumed the earlier problem was a one-off. Then, on 2020-03-14 the Pi froze. Wouldn't respond to pings, ssh or vnc. It is Ethernet-connected but the WiFi interface is active and it did not occur to me to try connecting via WiFi. I just did another power-cycle and then started nosing around through the logs. Which brought me to: Mar 14 12:48:16 iot-hub avahi-daemon[361]: Withdrawing address record for 192.168.132.60 on eth0. Mar 14 12:48:16 iot-hub avahi-daemon[361]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.132.60. Mar 14 12:48:16 iot-hub avahi-daemon[361]: Interface eth0.IPv4 no longer relevant for mDNS. and, from there, to this post. The main reasons I'm adding a comment to this post are (a) as a "me too" as of March 2020, and (b) in case the pattern of the RPi being perfectly OK until 2020-02-24 causes someone to say "ahah!" The updates in question were (from the history log): Upgrade: libpython3.7-minimal:armhf (3.7.3-2, 3.7.3-2+deb10u1), libraspberrypi- bin:armhf (1.20200114-1, 1.20200212-1), libopenjp2-7:armhf (2.3.0-2, 2.3.0-2+deb10u1), rc-gui:armhf (1.34, 1.36), libcom-err2:armhf (1.44.5-1+deb10u2, 1.44.5-1+deb10u3), libcups2:armhf (2.2.10-6+deb10u1, 2.2.10-6+deb10u2), libraspberrypi-dev:armhf (1.20200114-1, 1.20200212-1), libraspberrypi-doc:armhf (1.20200114-1, 1.20200212-1), python3.7-venv:armhf (3.7.3-2, 3.7.3-2+deb10u1), raspberrypi-ui- mods:armhf (1.20200127, 1.20200218), qt5-gtk-platformtheme:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), libfm4:armhf (1.3.1-1+rpt12, 1.3.1-1+rpt13), libsystemd0:armhf (241-7~deb10u2+rpi1, 241-7~deb10u3+rpi1), raspi-config:armhf (20200205, 20200207), libfm- modules:armhf (1.3.1-1+rpt12, 1.3.1-1+rpt13), libfm-extra4:armhf (1.3.1-1+rpt12, 1.3.1-1+rpt13), mariadb-common:armhf (1:10.3.17-0+deb10u1, 1:10.3.22-0+deb10u1), binutils:armhf (2.31.1-16+rpi1, 2.31.1-16+rpi2), e2fsprogs:armhf (1.44.5-1+deb10u2, 1.44.5-1+deb10u3), sudo:armhf (1.8.27-1+deb10u1, 1.8.27-1+deb10u2), libqt5dbus5:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), libqt5sql5-sqlite:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), python3-pil:armhf (5.4.1-2, 5.4.1-2+deb10u1), libpython3.7:armhf (3.7.3-2, 3.7.3-2+deb10u1), python3.7:armhf (3.7.3-2, 3.7.3-2+deb10u1), openssh-sftp-server:armhf (1:7.9p1-10+deb10u1, 1:7.9p1-10+deb10u2), libqt5widgets5:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), libfm-gtk4:armhf (1.3.1-1+rpt12, 1.3.1-1+rpt13), udev:armhf (241-7~deb10u2+rpi1, 241-7~deb10u3+rpi1), python3.7-dev:armhf (3.7.3-2, 3.7.3-2+deb10u1), binutils-arm-linux-gnueabihf:armhf (2.31.1-16+rpi1, 2.31.1-16+rpi2), libpython3.7-stdlib:armhf (3.7.3-2, 3.7.3-2+deb10u1), libudev1:armhf (241-7~deb10u2+rpi1, 241-7~deb10u3+rpi1), python3.7-minimal:armhf (3.7.3-2, 3.7.3-2+deb10u1), libqt5xml5:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), libqt5printsupport5:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), raspberrypi- kernel:armhf (1.20200114-1, 1.20200212-1), libss2:armhf (1.44.5-1+deb10u2, 1.44.5-1+deb10u3), libqt5concurrent5:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), libext2fs2:armhf (1.44.5-1+deb10u2, 1.44.5-1+deb10u3), raspberrypi-bootloader:armhf (1.20200114-1, 1.20200212-1), libexif12:armhf (0.6.21-5.1, 0.6.21-5.1+deb10u1), libqt5gui5:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), libimobiledevice6:armhf (1.2.1~git20181030.92c5462-1, 1.2.1~git20181030.92c5462-2), gldriver- test:armhf (0.4, 0.5), ssh:armhf (1:7.9p1-10+deb10u1, 1:7.9p1-10+deb10u2), systemd-sysv:armhf (241-7~deb10u2+rpi1, 241-7~deb10u3+rpi1), guile-2.2-libs:armhf (2.2.4+1-2, 2.2.4+1-2+deb10u1), realvnc-vnc-server:armhf (6.6.0.41949, 6.7.1.42348), libpython3.7-dev:armhf (3.7.3-2, 3.7.3-2+deb10u1), libpam-systemd:armhf (241-7~deb10u2+rpi1, 241-7~deb10u3+rpi1), libmatroska6v5:armhf (1.4.9-1, 1.4.9-1+deb10u1), systemd:armhf (241-7~deb10u2+rpi1, 241-7~deb10u3+rpi1), libwebkit2gtk-4.0-37:armhf (2.26.3-1~deb10u1+rpi1, 2.26.4-1~deb10u1+rpi1), libqt5core5a:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), piwiz:armhf (0.8, 0.9), libraspberrypi0:armhf (1.20200114-1, 1.20200212-1), openssh-server:armhf (1:7.9p1-10+deb10u1, 1:7.9p1-10+deb10u2), openssh-client:armhf (1:7.9p1-10+deb10u1, 1:7.9p1-10+deb10u2), libmysofa0:armhf (0.6~dfsg0-3, 0.6~dfsg0-3+deb10u1), rpi-chromium-mods:armhf
[Desktop-packages] [Bug 1773516] Re: [Lenovo Yoga 300-11IBY] Right click not working
*** This bug is a duplicate of bug 1759300 *** https://bugs.launchpad.net/bugs/1759300 Although the buttons are integral to the touchpad, they are clearly marked with a dividing line. Having read the proposed duplicate, while this issue may have the same underlying cause, this is not a mere configuration preference on this device because it has clearly identified buttons, albeit with nothing more than a coloured dividing line. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1773516 Title: [Lenovo Yoga 300-11IBY] Right click not working Status in xorg package in Ubuntu: Incomplete Bug description: The right click is not working on Lenovo Yoga touch pad after upgrade to 18.04, worked minutes before on 17.10. I think it works on the Think Pad out-of-the-box (after upgrade from 17.10), if that helps. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Uname: Linux 4.15.0-22-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Sat May 26 10:34:57 2018 DistUpgraded: 2018-05-25 23:14:56,258 DEBUG Running PostInstallScript: './xorg_fix_proprietary.py' DistroCodename: bionic DistroVariant: ubuntu DkmsStatus: virtualbox, 5.2.10, 4.13.0-39-generic, x86_64: installed virtualbox, 5.2.10, 4.15.0-22-generic, x86_64: installed ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0e) (prog-if 00 [VGA controller]) Subsystem: Lenovo Atom Processor Z36xxx/Z37xxx Series Graphics & Display [17aa:3908] InstallationDate: Installed on 2018-01-18 (128 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) MachineType: LENOVO 80M0 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-22-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to bionic on 2018-05-25 (0 days ago) dmi.bios.date: 07/30/2015 dmi.bios.vendor: LENOVO dmi.bios.version: C0CN31WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Mini dmi.board.vendor: LENOVO dmi.board.version: SDK0J33995WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo YOGA 300-11IBY dmi.modalias: dmi:bvnLENOVO:bvrC0CN31WW:bd07/30/2015:svnLENOVO:pn80M0:pvrLenovoYOGA300-11IBY:rvnLENOVO:rnMini:rvrSDK0J33995WIN:cvnLENOVO:ct10:cvrLenovoYOGA300-11IBY: dmi.product.family: IDEAPAD dmi.product.name: 80M0 dmi.product.version: Lenovo YOGA 300-11IBY dmi.sys.vendor: LENOVO version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.91-2 version.libgl1-mesa-dri: libgl1-mesa-dri 18.0.0~rc5-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 18.0.0~rc5-1ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.0.1-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1773516/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1773516] [NEW] Right click not working on Lenovo touchpad
Public bug reported: The right click is not working on Lenovo Yoga touch pad after upgrade to 18.04, worked minutes before on 17.10. I think it works on the Think Pad out-of-the-box (after upgrade from 17.10), if that helps. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Uname: Linux 4.15.0-22-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Sat May 26 10:34:57 2018 DistUpgraded: 2018-05-25 23:14:56,258 DEBUG Running PostInstallScript: './xorg_fix_proprietary.py' DistroCodename: bionic DistroVariant: ubuntu DkmsStatus: virtualbox, 5.2.10, 4.13.0-39-generic, x86_64: installed virtualbox, 5.2.10, 4.15.0-22-generic, x86_64: installed ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0e) (prog-if 00 [VGA controller]) Subsystem: Lenovo Atom Processor Z36xxx/Z37xxx Series Graphics & Display [17aa:3908] InstallationDate: Installed on 2018-01-18 (128 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) MachineType: LENOVO 80M0 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-22-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to bionic on 2018-05-25 (0 days ago) dmi.bios.date: 07/30/2015 dmi.bios.vendor: LENOVO dmi.bios.version: C0CN31WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Mini dmi.board.vendor: LENOVO dmi.board.version: SDK0J33995WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo YOGA 300-11IBY dmi.modalias: dmi:bvnLENOVO:bvrC0CN31WW:bd07/30/2015:svnLENOVO:pn80M0:pvrLenovoYOGA300-11IBY:rvnLENOVO:rnMini:rvrSDK0J33995WIN:cvnLENOVO:ct10:cvrLenovoYOGA300-11IBY: dmi.product.family: IDEAPAD dmi.product.name: 80M0 dmi.product.version: Lenovo YOGA 300-11IBY dmi.sys.vendor: LENOVO version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.91-2 version.libgl1-mesa-dri: libgl1-mesa-dri 18.0.0~rc5-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 18.0.0~rc5-1ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.0.1-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug bionic ubuntu -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1773516 Title: Right click not working on Lenovo touchpad Status in xorg package in Ubuntu: New Bug description: The right click is not working on Lenovo Yoga touch pad after upgrade to 18.04, worked minutes before on 17.10. I think it works on the Think Pad out-of-the-box (after upgrade from 17.10), if that helps. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Uname: Linux 4.15.0-22-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Sat May 26 10:34:57 2018 DistUpgraded: 2018-05-25 23:14:56,258 DEBUG Running PostInstallScript: './xorg_fix_proprietary.py' DistroCodename: bionic DistroVariant: ubuntu DkmsStatus: virtualbox, 5.2.10, 4.13.0-39-generic, x86_64: installed virtualbox, 5.2.10, 4.15.0-22-generic, x86_64: installed ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0e) (prog-if 00 [VGA controller]) Subsystem: Lenovo Atom Processor Z36xxx/Z37xxx Series Graphics & Display [17aa:3908] InstallationDate: Installed on 2018-01-18 (128 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) MachineType: LENOVO 80M0 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-22-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to bionic on 2018-05-25 (0 days ago) dmi.bios.date: 07/30/2015 dmi.bios.vendor: LENOVO dmi.bios.version: C0CN31WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Mini dmi.board.vendor: LENOVO dmi.board.version: SDK0J33995WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo YOGA
[Desktop-packages] [Bug 1744511] Re: Keyboard and mouse stop working randomly
17.04 did not have any problems, I never had 16.04 on this computer. An update to the kernel yesterday seems to have resolved this issue (linux-image-4.13.0-31). So it's not worth investigating further at this point in time. However, the kernel update seems to have introduced a full system freeze that occurs less often than the original problem, but this is another matter. I think I'll just run 17.04 until 18.04 comes out. I'm not sure if this should be marked invalid or fixed, so I'll leave that to someone else. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1744511 Title: Keyboard and mouse stop working randomly Status in gdm3 package in Ubuntu: Incomplete Status in gnome-shell package in Ubuntu: Incomplete Bug description: Lenovo Yogo 300 has a keyboard, touch pad and touch screen. Keyboard and mouse stop working, I am unable to see any pattern to the problem. This affects both Wayland and Xorg sessions, log-in and lock screen and desktop environment. Originally mistaken for a full system freeze, but touch-screen works fine. Putting computer into standby and resuming resolves the issue, but sometimes happens within seconds of resuming, sometimes it works for ages without a problem. Filed against gdm3 due to these events found in the log, but this may be unrelated: Jan 20 23:20:51 phill-Lenovo-YOGA-300-11IBY /usr/lib/gdm3/gdm-x-session[1234]: (II) event8 - (II) PEAQ WMI hotkeys: (II) device removed Jan 20 23:20:51 phill-Lenovo-YOGA-300-11IBY /usr/lib/gdm3/gdm-x-session[1234]: (II) event4 - (II) AT Translated Set 2 keyboard: (II) device removed Problem started immediately after installing 17.10.1, 17.04 had been used flawlessly since it's release on this hardware. Note that "gnome- session" is installed which I normally use, but as the problem occurs on the lock and login screens I guess it's nothing to do with that. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: gdm3 3.26.1-3ubuntu3 ProcVersionSignature: Ubuntu 4.13.0-25.29-generic 4.13.13 Uname: Linux 4.13.0-25-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.7 Architecture: amd64 CurrentDesktop: GNOME Date: Sat Jan 20 23:31:03 2018 InstallationDate: Installed on 2018-01-18 (2 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) SourcePackage: gdm3 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1744511/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 633101] Re: Duplicity is failing with an assertion error when looking for a non-existent manifest file
I get this occasionally over an SFTP interface to a remote block storage system from time-to-time. Due to their implementation there is an occasional and variable but short delay in newly written files becoming accessible in subsequent requests. As its a question of timing it usually doesn't cause a problem, but sometimes it does and then duplicity is unable to perform subsequent backups without manually wiping the local cache. Note the first run terminated with the error `Giving up after 1 attempts. IOError: [Errno 2] No such file`. Followed by the assertion errors described above for all subsequent runs until the cache is cleared. We may take the view that it is reasonable for the program to give up when during the original error on the remote, but I think it should to handle corruption in its own cache without manual intervention. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to duplicity in Ubuntu. https://bugs.launchpad.net/bugs/633101 Title: Duplicity is failing with an assertion error when looking for a non- existent manifest file Status in Duplicity: New Status in duplicity package in Ubuntu: Confirmed Status in duplicity package in Debian: New Bug description: Binary package hint: duplicity Dupliciity refuses to back my files and throws up an assertion error where it appears to be trying to use a non-existent manifest.part file. That file doesn't exist and I cannot find where it is referenced. Here is the traceback: Traceback (most recent call last): File "/usr/bin/duplicity", line 1251, in with_tempdir(main) File "/usr/bin/duplicity", line 1244, in with_tempdir fn() File "/usr/bin/duplicity", line 1149, in main globals.archive_dir).set_values() File "/usr/lib/python2.6/dist-packages/duplicity/collections.py", line 676, in set_values self.get_backup_chains(partials + backend_filename_list) File "/usr/lib/python2.6/dist-packages/duplicity/collections.py", line 799, in get_backup_chains map(add_to_sets, filename_list) File "/usr/lib/python2.6/dist-packages/duplicity/collections.py", line 789, in add_to_sets if set.add_filename(filename): File "/usr/lib/python2.6/dist-packages/duplicity/collections.py", line 89, in add_filename self.set_manifest(filename) File "/usr/lib/python2.6/dist-packages/duplicity/collections.py", line 118, in set_manifest remote_filename) AssertionError: ('duplicity-full.20100817T193647Z.manifest.part', 'duplicity-full.20100817T193647Z.manifest') ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: duplicity 0.6.09-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.35-20.29-generic 2.6.35.4 Uname: Linux 2.6.35-20-generic i686 Architecture: i386 Date: Wed Sep 8 12:18:29 2010 InstallationMedia: Ubuntu-Netbook 10.10 "Maverick Meerkat" - Alpha i386 (20100803.1) ProcEnviron: PATH=(custom, user) LANG=en_GB.utf8 SHELL=/bin/bash SourcePackage: duplicity To manage notifications about this bug go to: https://bugs.launchpad.net/duplicity/+bug/633101/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1665643] Re: Duplicity error "ssh: Unknown exception: CTR mode needs counter parameter, not IV"
Possible duplicate of #1665598 or maybe just a dependency, depends on point of view. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to duplicity in Ubuntu. https://bugs.launchpad.net/bugs/1665643 Title: Duplicity error "ssh: Unknown exception: CTR mode needs counter parameter, not IV" Status in duplicity package in Ubuntu: Confirmed Bug description: Ubuntu 16.04 - Duplicity Following error using duplicity with SFTP backend after upgrade today on several machines. Confirmed to be an upgrade as had a working machine, apt upgraded it, then it was broken. Only packages I can see that were upgraded that might be related are python-crypto (2.6.1-6ubuntu0.16.04.1) and libssh2-1:amd64 (1.5.0-2ubuntu0.1). IMPORTANT: Duplicity unusable in SFTP mode since the upgrade, it is not possible to perform backups. ssh: Unknown exception: CTR mode needs counter parameter, not IV ssh: Traceback (most recent call last): ssh: File "/usr/lib/python2.7/dist-packages/paramiko/transport.py", line 1744, in run ssh: self.kex_engine.parse_next(ptype, m) ssh: File "/usr/lib/python2.7/dist-packages/paramiko/kex_group1.py", line 75, in parse_next ssh: return self._parse_kexdh_reply(m) ssh: File "/usr/lib/python2.7/dist-packages/paramiko/kex_group1.py", line 112, in _parse_kexdh_reply ssh: self.transport._activate_outbound() ssh: File "/usr/lib/python2.7/dist-packages/paramiko/transport.py", line 2074, in _activate_outbound ssh: engine = self._get_cipher(self.local_cipher, key_out, IV_out) ssh: File "/usr/lib/python2.7/dist-packages/paramiko/transport.py", line 1649, in _get_cipher ssh: return self._cipher_info[name]['class'].new(key, self._cipher_info[name]['mode'], iv, counter) ssh: File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 94, in new ssh: return AESCipher(key, *args, **kwargs) ssh: File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 59, in __init__ ssh: blockalgo.BlockAlgo.__init__(self, _AES, key, *args, **kwargs) ssh: File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/blockalgo.py", line 141, in __init__ ssh: self._cipher = factory.new(key, *args, **kwargs) ssh: ValueError: CTR mode needs counter parameter, not IV ssh: BackendException: ssh connection to cli-5l...@sftp.orbit.brightbox.com:22 failed: CTR mode needs counter parameter, not IV ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: duplicity 0.7.06-2ubuntu2 ProcVersionSignature: Ubuntu 4.4.0-62.83-generic 4.4.40 Uname: Linux 4.4.0-62-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 CurrentDesktop: Unity Date: Fri Feb 17 14:03:00 2017 InstallationDate: Installed on 2016-06-03 (259 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: duplicity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/duplicity/+bug/1665643/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1665643] Re: Duplicity error "ssh: Unknown exception: CTR mode needs counter parameter, not IV"
@vej not sure what version I had before but just ran another update which only changed python-crypto: `Unpacking python-crypto (2.6.1-6ubuntu0.16.04.2) over (2.6.1-6ubuntu0.16.04.1)` Duplicity is working now although still showing warnings about the problem. Looks like this new version was created about 4 hours ago. Not sure if this is fully fixed or not. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to duplicity in Ubuntu. https://bugs.launchpad.net/bugs/1665643 Title: Duplicity error "ssh: Unknown exception: CTR mode needs counter parameter, not IV" Status in duplicity package in Ubuntu: Confirmed Bug description: Ubuntu 16.04 - Duplicity Following error using duplicity with SFTP backend after upgrade today on several machines. Confirmed to be an upgrade as had a working machine, apt upgraded it, then it was broken. Only packages I can see that were upgraded that might be related are python-crypto (2.6.1-6ubuntu0.16.04.1) and libssh2-1:amd64 (1.5.0-2ubuntu0.1). IMPORTANT: Duplicity unusable in SFTP mode since the upgrade, it is not possible to perform backups. ssh: Unknown exception: CTR mode needs counter parameter, not IV ssh: Traceback (most recent call last): ssh: File "/usr/lib/python2.7/dist-packages/paramiko/transport.py", line 1744, in run ssh: self.kex_engine.parse_next(ptype, m) ssh: File "/usr/lib/python2.7/dist-packages/paramiko/kex_group1.py", line 75, in parse_next ssh: return self._parse_kexdh_reply(m) ssh: File "/usr/lib/python2.7/dist-packages/paramiko/kex_group1.py", line 112, in _parse_kexdh_reply ssh: self.transport._activate_outbound() ssh: File "/usr/lib/python2.7/dist-packages/paramiko/transport.py", line 2074, in _activate_outbound ssh: engine = self._get_cipher(self.local_cipher, key_out, IV_out) ssh: File "/usr/lib/python2.7/dist-packages/paramiko/transport.py", line 1649, in _get_cipher ssh: return self._cipher_info[name]['class'].new(key, self._cipher_info[name]['mode'], iv, counter) ssh: File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 94, in new ssh: return AESCipher(key, *args, **kwargs) ssh: File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 59, in __init__ ssh: blockalgo.BlockAlgo.__init__(self, _AES, key, *args, **kwargs) ssh: File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/blockalgo.py", line 141, in __init__ ssh: self._cipher = factory.new(key, *args, **kwargs) ssh: ValueError: CTR mode needs counter parameter, not IV ssh: BackendException: ssh connection to cli-5l...@sftp.orbit.brightbox.com:22 failed: CTR mode needs counter parameter, not IV ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: duplicity 0.7.06-2ubuntu2 ProcVersionSignature: Ubuntu 4.4.0-62.83-generic 4.4.40 Uname: Linux 4.4.0-62-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 CurrentDesktop: Unity Date: Fri Feb 17 14:03:00 2017 InstallationDate: Installed on 2016-06-03 (259 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: duplicity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/duplicity/+bug/1665643/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1665643] [NEW] Duplicity error "ssh: Unknown exception: CTR mode needs counter parameter, not IV"
Public bug reported: Ubuntu 16.04 - Duplicity Following error using duplicity with SFTP backend after upgrade today on several machines. Confirmed to be an upgrade as had a working machine, apt upgraded it, then it was broken. Only packages I can see that were upgraded that might be related are python-crypto (2.6.1-6ubuntu0.16.04.1) and libssh2-1:amd64 (1.5.0-2ubuntu0.1). IMPORTANT: Duplicity unusable in SFTP mode since the upgrade, it is not possible to perform backups. ssh: Unknown exception: CTR mode needs counter parameter, not IV ssh: Traceback (most recent call last): ssh: File "/usr/lib/python2.7/dist-packages/paramiko/transport.py", line 1744, in run ssh: self.kex_engine.parse_next(ptype, m) ssh: File "/usr/lib/python2.7/dist-packages/paramiko/kex_group1.py", line 75, in parse_next ssh: return self._parse_kexdh_reply(m) ssh: File "/usr/lib/python2.7/dist-packages/paramiko/kex_group1.py", line 112, in _parse_kexdh_reply ssh: self.transport._activate_outbound() ssh: File "/usr/lib/python2.7/dist-packages/paramiko/transport.py", line 2074, in _activate_outbound ssh: engine = self._get_cipher(self.local_cipher, key_out, IV_out) ssh: File "/usr/lib/python2.7/dist-packages/paramiko/transport.py", line 1649, in _get_cipher ssh: return self._cipher_info[name]['class'].new(key, self._cipher_info[name]['mode'], iv, counter) ssh: File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 94, in new ssh: return AESCipher(key, *args, **kwargs) ssh: File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 59, in __init__ ssh: blockalgo.BlockAlgo.__init__(self, _AES, key, *args, **kwargs) ssh: File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/blockalgo.py", line 141, in __init__ ssh: self._cipher = factory.new(key, *args, **kwargs) ssh: ValueError: CTR mode needs counter parameter, not IV ssh: BackendException: ssh connection to cli-5l...@sftp.orbit.brightbox.com:22 failed: CTR mode needs counter parameter, not IV ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: duplicity 0.7.06-2ubuntu2 ProcVersionSignature: Ubuntu 4.4.0-62.83-generic 4.4.40 Uname: Linux 4.4.0-62-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 CurrentDesktop: Unity Date: Fri Feb 17 14:03:00 2017 InstallationDate: Installed on 2016-06-03 (259 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: duplicity UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: duplicity (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial ** Description changed: Ubuntu 16.04 - Duplicity - Following error using duplicity with SSH backend after upgrade today on + Following error using duplicity with SFTP backend after upgrade today on several machines. Confirmed to be an upgrade as had a working machine, apt upgraded it, then it was broken. Only packages I can see that were upgraded that might be related are python-crypto (2.6.1-6ubuntu0.16.04.1) and libssh2-1:amd64 (1.5.0-2ubuntu0.1). IMPORTANT: Duplicity unusable in SFTP mode since the upgrade, it is not possible to perform backups. - ssh: Unknown exception: CTR mode needs counter parameter, not IV ssh: Traceback (most recent call last): ssh: File "/usr/lib/python2.7/dist-packages/paramiko/transport.py", line 1744, in run ssh: self.kex_engine.parse_next(ptype, m) ssh: File "/usr/lib/python2.7/dist-packages/paramiko/kex_group1.py", line 75, in parse_next ssh: return self._parse_kexdh_reply(m) ssh: File "/usr/lib/python2.7/dist-packages/paramiko/kex_group1.py", line 112, in _parse_kexdh_reply ssh: self.transport._activate_outbound() ssh: File "/usr/lib/python2.7/dist-packages/paramiko/transport.py", line 2074, in _activate_outbound ssh: engine = self._get_cipher(self.local_cipher, key_out, IV_out) ssh: File "/usr/lib/python2.7/dist-packages/paramiko/transport.py", line 1649, in _get_cipher ssh: return self._cipher_info[name]['class'].new(key, self._cipher_info[name]['mode'], iv, counter) ssh: File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 94, in new ssh: return AESCipher(key, *args, **kwargs) ssh: File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 59, in __init__ ssh: blockalgo.BlockAlgo.__init__(self, _AES, key, *args, **kwargs) ssh: File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/blockalgo.py", line 141, in __init__ ssh: self._cipher = factory.new(key, *args, **kwargs) ssh: ValueError: CTR mode needs counter parameter, not IV - ssh: + ssh: BackendException: ssh connection to cli-5l...@sftp.orbit.brightbox.com:22 failed: CTR mode needs counter parameter, not IV ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: duplicity 0.7.06-2ubuntu2 ProcVersionSignature: Ubuntu 4.4.0-62.83-generic 4.4.40 Uname: Linux
[Desktop-packages] [Bug 1585863] Re: WiFi malfunction after suspend & resume stress - sudo wpa_cli scan required to fix it.
@auspex In my experience the physical act of bringing a computer out of suspend takes longer than network manager takes to restart and reconnect (well under 0.5 seconds). It's not only negligible, but I think it's inevitable that there will be some latency in reconnecting after suspend. I have to agree with other comments supporting the restart workaround. However, it's clear this issue is not going to see any action. Does anyone know of a Debian that's not affected? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1585863 Title: WiFi malfunction after suspend & resume stress - sudo wpa_cli scan required to fix it. Status in NetworkManager: New Status in OEM Priority Project: New Status in OEM Priority Project xenial series: New Status in network-manager package in Ubuntu: Confirmed Bug description: Description:Ubuntu Yakkety Yak (development branch) Release:16.10 Packages: libnm-glib-vpn1:amd64 1.2.2-0ubuntu2 libnm-glib4:amd64 1.2.2-0ubuntu2 libnm-util2:amd64 1.2.2-0ubuntu2 libnm0:amd641.2.2-0ubuntu2 network-manager 1.2.2-0ubuntu2 Reproduce steps: 1. Install fwts by `sudo apt-get install fwts`. 2. Run the suspend & resume stress test. sudo fwts s3 --s3-multiple=30 --s3-min-delay=5 --s3-max-delay=5 --s3-delay-delta=5 Expected result: The WiFi still functioned. Actual result: The WiFi can not connect to any access point and we have to execute `sudo wpa_cli scan` manually to make it work again. P.S. Ubuntu 16.04 also has the same issue. To manage notifications about this bug go to: https://bugs.launchpad.net/network-manager/+bug/1585863/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1637638] [NEW] Gnome Software causes heavy prolonged disk on start-up
Public bug reported: After booting and logging in, it takes a long time for the computer to settle down and become properly usable. Heaving hard-disc activity by gnome-software which lasts for over a minute. This is revealed by `iotop` as the only application with around 99% of the disk access. This is a serious problem on single-disk machines as programs can't properly start until it's over. The program appears to be present in Startup Applications with the command `/usr/bin/gnome-software --gapplication-service`, even for the guest user. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: gnome-software 3.20.1+git20160617.1.0440874.ubuntu-xenial-0ubuntu1~16.04.1 ProcVersionSignature: Ubuntu 4.4.0-45.66-generic 4.4.21 Uname: Linux 4.4.0-45-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Fri Oct 28 21:49:59 2016 InstallationDate: Installed on 2016-06-03 (147 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: gnome-software UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gnome-software (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-software in Ubuntu. https://bugs.launchpad.net/bugs/1637638 Title: Gnome Software causes heavy prolonged disk on start-up Status in gnome-software package in Ubuntu: New Bug description: After booting and logging in, it takes a long time for the computer to settle down and become properly usable. Heaving hard-disc activity by gnome-software which lasts for over a minute. This is revealed by `iotop` as the only application with around 99% of the disk access. This is a serious problem on single-disk machines as programs can't properly start until it's over. The program appears to be present in Startup Applications with the command `/usr/bin/gnome-software --gapplication-service`, even for the guest user. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: gnome-software 3.20.1+git20160617.1.0440874.ubuntu-xenial-0ubuntu1~16.04.1 ProcVersionSignature: Ubuntu 4.4.0-45.66-generic 4.4.21 Uname: Linux 4.4.0-45-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Fri Oct 28 21:49:59 2016 InstallationDate: Installed on 2016-06-03 (147 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: gnome-software UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1637638/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1627204] [NEW] Segmentation fault using lookup
Public bug reported: Ubuntu 16.04 LTS installed from scratch with all recent updates (although problem has existed since first install of 16.04 LTS). Steps to reproduce: 1) Run `gnome-nettool` in a terminal. 2) Open the lookup tab. 3) Lookup yahoo.com, or anything, I've not found anything that works. 4) Click the lookup button. 5) The program closes with `Segmentation fault (core dumped)` in the terminal. I can't find the core dump file. The above still happens if run from the launcher, and comes up with the "report problem" box, which I've clicked yes to many of times over the last few months. Happens on two different computers, both x84_64. The computers have little in common hardware wise. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: gnome-nettool 3.8.1-1build3 ProcVersionSignature: Ubuntu 4.4.0-36.55-generic 4.4.16 Uname: Linux 4.4.0-36-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Fri Sep 23 22:59:06 2016 InstallationDate: Installed on 2016-06-13 (102 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: gnome-nettool UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gnome-nettool (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-nettool in Ubuntu. https://bugs.launchpad.net/bugs/1627204 Title: Segmentation fault using lookup Status in gnome-nettool package in Ubuntu: New Bug description: Ubuntu 16.04 LTS installed from scratch with all recent updates (although problem has existed since first install of 16.04 LTS). Steps to reproduce: 1) Run `gnome-nettool` in a terminal. 2) Open the lookup tab. 3) Lookup yahoo.com, or anything, I've not found anything that works. 4) Click the lookup button. 5) The program closes with `Segmentation fault (core dumped)` in the terminal. I can't find the core dump file. The above still happens if run from the launcher, and comes up with the "report problem" box, which I've clicked yes to many of times over the last few months. Happens on two different computers, both x84_64. The computers have little in common hardware wise. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: gnome-nettool 3.8.1-1build3 ProcVersionSignature: Ubuntu 4.4.0-36.55-generic 4.4.16 Uname: Linux 4.4.0-36-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Fri Sep 23 22:59:06 2016 InstallationDate: Installed on 2016-06-13 (102 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: gnome-nettool UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-nettool/+bug/1627204/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 615239] Re: Every Wi-Fi disconnection is treated as an authentication error
There is a potential security issue here. Whenever a legitimate program is seen asking for a password as the result of an automatic operation people come to think of it as normal. This undermines the suspicion that we would otherwise encourage in people to help them avoid scams and malicious software. A more serious security issue arises if you are using a normal user account and the connection in question is shared. In this case you get a second dialogue box asking for an administrator password for privilege escalation. In this case we have users socially engineered to provide privilege escalation to any user-space program that impersonates this bug. I think it would be preferable that it didn't ask for a password (even if we know that's what's wrong) and just retried from time-to-time. If the user wants to remedy the situation they can just go through what they did first time they connected, at least then they expect to be asked for a password so no harm is done. Observations based on 16.04. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/615239 Title: Every Wi-Fi disconnection is treated as an authentication error Status in Canonical System Image: Confirmed Status in NetworkManager: Confirmed Status in network-manager package in Ubuntu: Confirmed Bug description: Binary package hint: network-manager I'm using lucid, with the 0.8-0ubuntu3, in a laptop, and is incredible that the nm-applet couldn't diagnostic why the wireless connection was lost and only trow the password prompt when I've lost the signal. nm-applet should see the kern.log or dmesg to react at signal lost. For example, when the kernel try 3 times probe the AP and don't get response nm-applet say The pc are far away from the access point and can not be connected. Please, move close to the access point or try another more near. And by the way, when the authentication fails, or the association. --- Architecture: i386 CRDA: Error: [Errno 2] No existe el archivo o directorio CheckboxSubmission: ee8ebec101005ce57a9c3355b36ca8a7 CheckboxSystem: edda5d4f616ca792bf437989cb597002 DistroRelease: Ubuntu 10.04 IfupdownConfig: auto lo iface lo inet loopback InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100429) IpRoute: 172.16.254.0/24 dev wlan1 proto kernel scope link src 172.16.254.5 metric 2 169.254.0.0/16 dev wlan1 scope link metric 1000 default via 172.16.254.200 dev wlan1 proto static Keyfiles: Error: [Errno 2] No existe el archivo o directorio Package: network-manager 0.8-0ubuntu3 PackageArchitecture: i386 ProcEnviron: PATH=(custom, no user) LANG=es_DO.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: lucid Uname: Linux 2.6.32-24-generic i686 UserGroups: To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/615239/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1169463] Re: duplicity fails with message: UnsupportedBackendScheme: scheme not supported in url
Confirmed in Ubuntu 16.04 LTS. Package `python-paramiko` must still be installed separately. If it's an optional plug-in then maybe having some `duplicity-` dummy packages would be useful with better error messages telling you what to install. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to duplicity in Ubuntu. https://bugs.launchpad.net/bugs/1169463 Title: duplicity fails with message: UnsupportedBackendScheme: scheme not supported in url Status in duplicity package in Ubuntu: Confirmed Bug description: After fresh installation of ubuntu 12.04.2 LTS server 64 bit version, my duplicity setup does not work anymore. The setup worked on ubuntu server 11.10 64 bit. duplicity 0.6.18 now ends with the message: Import of duplicity.backends.sshbackend Failed: No module named paramiko Import of duplicity.backends.giobackend Failed: No module named gio UnsupportedBackendScheme: scheme not supported in url: ssh://x...@xxx.xxx.xxx/xxx ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: duplicity 0.6.18-0ubuntu3.1 ProcVersionSignature: Ubuntu 3.5.0-27.46~precise1-generic 3.5.7.7 Uname: Linux 3.5.0-27-generic x86_64 ApportVersion: 2.0.1-0ubuntu17.1 Architecture: amd64 Date: Tue Apr 16 10:05:43 2013 InstallationMedia: Ubuntu-Server 12.04.2 LTS "Precise Pangolin" - Release amd64 (20130214) MarkForUpload: True SourcePackage: duplicity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/duplicity/+bug/1169463/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1495063] Re: Networking occasionally doesn't recover from suspend
*** This bug is a duplicate of bug 1380480 *** https://bugs.launchpad.net/bugs/1380480 Not a duplicate of #1380480 as that bug report clearly states that disabling and enabling networking in the applet restores the network. This bug report clearly states that has been tried and does not work. Note that since 16.04 I've been getting this on all computers that I have and a lot more frequently. A separate bug has been raised for that as it was a different operating system and affects different hardware. See #1589125. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1495063 Title: Networking occasionally doesn't recover from suspend Status in network-manager package in Ubuntu: New Bug description: Occasionally, networking is disabled upon recovery from suspend. Clicking "Enable Networking" on the menu from the notification icon has no effect. It requires network-manager to be restarted with `service network-manager restart`. I can't identify a pattern to the problem. I can suspend the computer for minutes or hours without it happening. I've not noticed it on other computers running 14.04 that I have, so it's probably limited to my this particular hardware. I didn't notice it on previous versions of Ubuntu on this hardware. However, due to the nature of the problem it will not be practical to bisect the kernel as I don't have a reliable method of reproducing the fault as of yet. My network devices are as follows (I use the wireless one only): Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02) Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01) ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: network-manager 0.9.8.8-0ubuntu7.1 ProcVersionSignature: Ubuntu 3.16.0-48.64~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-48-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Sat Sep 12 12:44:30 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-07-13 (60 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) IpRoute: default via 192.168.1.1 dev wlan1 proto static 192.168.1.0/24 dev wlan1 proto kernel scope link src 192.168.1.2 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME UUID TYPE TIMESTAMPTIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH HTC Portable Hotspot DF99 b31b75bc-5b76-4592-9b4a-d9d860ea34aa 802-11-wireless 1441832180 Wed 09 Sep 2015 21:56:20 BST yes no /org/freedesktop/NetworkManager/Settings/1 TALKTALK-D069DC 700ea4cb-a660-479e-aa32-c00ad71e9064 802-11-wireless 1442058263 Sat 12 Sep 2015 12:44:23 BST yes no /org/freedesktop/NetworkManager/Settings/0 nmcli-dev: DEVICE TYPE STATE DBUS-PATH eth1 802-3-ethernetunavailable /org/freedesktop/NetworkManager/Devices/1 wlan1 802-11-wireless connected /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.8.8connected enabled enabled enabledenabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1495063/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1589125] Re: WiFi does not work after about 1 in 4 suspends
*** This bug is a duplicate of bug 1585863 *** https://bugs.launchpad.net/bugs/1585863 Probably not a duplicate of #1585863 because that bug says that the network can be restored by performing `sudo wpa_cli scan`. I just tried this and it does not work for me, only `sudo service network-manager restart` seems to work as indicated in the bug description. ** Description changed: Steps: Suspend, wait, resume, a few times. The Network Manager applet shows WiFi is enabled and shows just one or a handful of WiFi names, they don't include some that are known to be available and in use on other computers. Disabling and enabling WiFi does not fix the problem. Disabling and enabling networking does not fix the problem. Adding the following does not help: - /etc/pm/config.d/unload_modules + /etc/pm/config.d/unload_modules SUSPEND_MODULES="$SUSPEND_MODULES iwlwifi" + + Running `sudo wpa_cli scan` does not restore the network connection. I + only mention this because of a similar bug where this is an effective + workaround. Only workaround which works perfectly and instantly is to run: sudo service network-manager restart ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: network-manager 1.2.0-0ubuntu0.16.04.2 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Sat Jun 4 18:18:50 2016 IfupdownConfig: - # interfaces(5) file used by ifup(8) and ifdown(8) - auto lo - iface lo inet loopback + # interfaces(5) file used by ifup(8) and ifdown(8) + auto lo + iface lo inet loopback InstallationDate: Installed on 2016-05-30 (4 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) IpRoute: - default via 192.168.43.1 dev wlp2s0 proto static metric 600 - 169.254.0.0/16 dev wlp2s0 scope link metric 1000 - 192.168.43.0/24 dev wlp2s0 proto kernel scope link src 192.168.43.89 metric 600 + default via 192.168.43.1 dev wlp2s0 proto static metric 600 + 169.254.0.0/16 dev wlp2s0 scope link metric 1000 + 192.168.43.0/24 dev wlp2s0 proto kernel scope link src 192.168.43.89 metric 600 NetworkManager.state: - [main] - NetworkingEnabled=true - WirelessEnabled=true - WWANEnabled=true + [main] + NetworkingEnabled=true + WirelessEnabled=true + WWANEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-dev: - DEVICE TYPE STATEDBUS-PATH CONNECTION CON-UUID CON-PATH - wlp2s0 wifi connected/org/freedesktop/NetworkManager/Devices/0 HTC Portable Hotspot DF99 c29b59ba-b6ef-49db-b159-75ec21d3f436 /org/freedesktop/NetworkManager/ActiveConnection/0 - enp1s0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/1 -- ---- - lo loopback unmanaged/org/freedesktop/NetworkManager/Devices/2 -- ---- + DEVICE TYPE STATEDBUS-PATH CONNECTION CON-UUID CON-PATH + wlp2s0 wifi connected/org/freedesktop/NetworkManager/Devices/0 HTC Portable Hotspot DF99 c29b59ba-b6ef-49db-b159-75ec21d3f436 /org/freedesktop/NetworkManager/ActiveConnection/0 + enp1s0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/1 -- ---- + lo loopback unmanaged/org/freedesktop/NetworkManager/Devices/2 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1589125 Title: WiFi does not work after about 1 in 4 suspends Status in network-manager package in Ubuntu: Confirmed Bug description: Steps: Suspend, wait, resume, a few times. The Network Manager applet shows WiFi is enabled and shows just one or a handful of WiFi names, they don't include some that are known to be available and in use on other computers. Disabling and enabling WiFi does not fix the problem. Disabling and enabling networking does not fix the problem. Adding the following does not help: /etc/pm/config.d/unload_modules SUSPEND_MODULES="$SUSPEND_MODULES iwlwifi" Running `sudo wpa_cli scan` does not restore the network connection. I only mention this because of a similar bug where this is an effective workaround. Only
[Desktop-packages] [Bug 1589125] Re: WiFi does not work after about 1 in 4 suspends
*** This bug is a duplicate of bug 1576747 *** https://bugs.launchpad.net/bugs/1576747 Maybe not a duplicate of 1576747 as I have no network communication on resume. The description of 1576747 states "Oddly enough, I'm still able to communicate on the network that I was connected to prior to suspend". -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1589125 Title: WiFi does not work after about 1 in 4 suspends Status in network-manager package in Ubuntu: Confirmed Bug description: Steps: Suspend, wait, resume, a few times. The Network Manager applet shows WiFi is enabled and shows just one or a handful of WiFi names, they don't include some that are known to be available and in use on other computers. Disabling and enabling WiFi does not fix the problem. Disabling and enabling networking does not fix the problem. Adding the following does not help: /etc/pm/config.d/unload_modules SUSPEND_MODULES="$SUSPEND_MODULES iwlwifi" Only workaround which works perfectly and instantly is to run: sudo service network-manager restart ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: network-manager 1.2.0-0ubuntu0.16.04.2 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Sat Jun 4 18:18:50 2016 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2016-05-30 (4 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) IpRoute: default via 192.168.43.1 dev wlp2s0 proto static metric 600 169.254.0.0/16 dev wlp2s0 scope link metric 1000 192.168.43.0/24 dev wlp2s0 proto kernel scope link src 192.168.43.89 metric 600 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-dev: DEVICE TYPE STATEDBUS-PATH CONNECTION CON-UUID CON-PATH wlp2s0 wifi connected/org/freedesktop/NetworkManager/Devices/0 HTC Portable Hotspot DF99 c29b59ba-b6ef-49db-b159-75ec21d3f436 /org/freedesktop/NetworkManager/ActiveConnection/0 enp1s0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/1 -- ---- lo loopback unmanaged/org/freedesktop/NetworkManager/Devices/2 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1589125/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 215729] Re: Seahorse fails to import OpenPGP keys
This is back in Ubuntu 16.04, exactly the same method to reproduce. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to seahorse in Ubuntu. https://bugs.launchpad.net/bugs/215729 Title: Seahorse fails to import OpenPGP keys Status in seahorse: Fix Released Status in seahorse package in Ubuntu: Fix Released Status in seahorse source package in Hardy: Fix Released Bug description: Binary package hint: seahorse Steps to reproduce: 1. Open Seahorse (Applications -> Accessories -> Passwords and Encryption Keys) 2. Click "Find Remote Keys" 3. Search for someoneeven someone random 4. Pick a key from the list returned 5. Hit either the big "Import" button or go to Key -> Import What happens: Nothing What should happen: Public key should be downloaded and added to keyring To manage notifications about this bug go to: https://bugs.launchpad.net/seahorse/+bug/215729/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 215729] Re: Seahorse fails to import OpenPGP keys
For clarification, I experienced the problem finding and importing the remote keys for kernel-...@canonical.com. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to seahorse in Ubuntu. https://bugs.launchpad.net/bugs/215729 Title: Seahorse fails to import OpenPGP keys Status in seahorse: Fix Released Status in seahorse package in Ubuntu: Fix Released Status in seahorse source package in Hardy: Fix Released Bug description: Binary package hint: seahorse Steps to reproduce: 1. Open Seahorse (Applications -> Accessories -> Passwords and Encryption Keys) 2. Click "Find Remote Keys" 3. Search for someoneeven someone random 4. Pick a key from the list returned 5. Hit either the big "Import" button or go to Key -> Import What happens: Nothing What should happen: Public key should be downloaded and added to keyring To manage notifications about this bug go to: https://bugs.launchpad.net/seahorse/+bug/215729/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1495063] Re: Networking occasionally doesn't recover from suspend
I have also confirmed this problem on a completely different computer, it uses the ath9k driver: $ lspci 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01) 02:03.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 70) sudo lshw -C network [sudo] password for phill: *-network description: Wireless interface product: AR9287 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@:01:00.0 logical name: wlp1s0 version: 01 serial: 64:70:02:6e:fe:03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=4.4.0-22-generic firmware=N/A ip=192.168.43.218 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:16 memory:feaf-feaf -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1495063 Title: Networking occasionally doesn't recover from suspend Status in network-manager package in Ubuntu: New Bug description: Occasionally, networking is disabled upon recovery from suspend. Clicking "Enable Networking" on the menu from the notification icon has no effect. It requires network-manager to be restarted with `service network-manager restart`. I can't identify a pattern to the problem. I can suspend the computer for minutes or hours without it happening. I've not noticed it on other computers running 14.04 that I have, so it's probably limited to my this particular hardware. I didn't notice it on previous versions of Ubuntu on this hardware. However, due to the nature of the problem it will not be practical to bisect the kernel as I don't have a reliable method of reproducing the fault as of yet. My network devices are as follows (I use the wireless one only): Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02) Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01) ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: network-manager 0.9.8.8-0ubuntu7.1 ProcVersionSignature: Ubuntu 3.16.0-48.64~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-48-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Sat Sep 12 12:44:30 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-07-13 (60 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) IpRoute: default via 192.168.1.1 dev wlan1 proto static 192.168.1.0/24 dev wlan1 proto kernel scope link src 192.168.1.2 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME UUID
[Desktop-packages] [Bug 1589125] [NEW] WiFi does not work after about 1 in 4 suspends
Public bug reported: Steps: Suspend, wait, resume, a few times. The Network Manager applet shows WiFi is enabled and shows just one or a handful of WiFi names, they don't include some that are known to be available and in use on other computers. Disabling and enabling WiFi does not fix the problem. Disabling and enabling networking does not fix the problem. Adding the following does not help: /etc/pm/config.d/unload_modules SUSPEND_MODULES="$SUSPEND_MODULES iwlwifi" Only workaround which works perfectly and instantly is to run: sudo service network-manager restart ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: network-manager 1.2.0-0ubuntu0.16.04.2 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Sat Jun 4 18:18:50 2016 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2016-05-30 (4 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) IpRoute: default via 192.168.43.1 dev wlp2s0 proto static metric 600 169.254.0.0/16 dev wlp2s0 scope link metric 1000 192.168.43.0/24 dev wlp2s0 proto kernel scope link src 192.168.43.89 metric 600 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-dev: DEVICE TYPE STATEDBUS-PATH CONNECTION CON-UUID CON-PATH wlp2s0 wifi connected/org/freedesktop/NetworkManager/Devices/0 HTC Portable Hotspot DF99 c29b59ba-b6ef-49db-b159-75ec21d3f436 /org/freedesktop/NetworkManager/ActiveConnection/0 enp1s0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/1 -- ---- lo loopback unmanaged/org/freedesktop/NetworkManager/Devices/2 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1589125 Title: WiFi does not work after about 1 in 4 suspends Status in network-manager package in Ubuntu: New Bug description: Steps: Suspend, wait, resume, a few times. The Network Manager applet shows WiFi is enabled and shows just one or a handful of WiFi names, they don't include some that are known to be available and in use on other computers. Disabling and enabling WiFi does not fix the problem. Disabling and enabling networking does not fix the problem. Adding the following does not help: /etc/pm/config.d/unload_modules SUSPEND_MODULES="$SUSPEND_MODULES iwlwifi" Only workaround which works perfectly and instantly is to run: sudo service network-manager restart ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: network-manager 1.2.0-0ubuntu0.16.04.2 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Sat Jun 4 18:18:50 2016 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2016-05-30 (4 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) IpRoute: default via 192.168.43.1 dev wlp2s0 proto static metric 600 169.254.0.0/16 dev wlp2s0 scope link metric 1000 192.168.43.0/24 dev wlp2s0 proto kernel scope link src 192.168.43.89 metric 600 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-dev: DEVICE TYPE STATEDBUS-PATH CONNECTION CON-UUID CON-PATH wlp2s0 wifi connected/org/freedesktop/NetworkManager/Devices/0 HTC Portable Hotspot DF99 c29b59ba-b6ef-49db-b159-75ec21d3f436 /org/freedesktop/NetworkManager/ActiveConnection/0 enp1s0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/1 -- ---- lo loopback unmanaged
[Desktop-packages] [Bug 1588801] [NEW] Ubuntu Software says there are updates while Software Updater says there are none
Public bug reported: Steps: 1) Clean install Ubuntu 16.04 Desktop x86 64 2) Run Software Updater and install all updates. 3) Restart. 4) Run Software Updater again and observe there are no updates. 5) Run Ubuntu Software and observer there are updates. 6) Install the updates. Expected: Both update methods would have the same result, or one of them should not be installed by default. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: gnome-software 3.20.1+git20160426.1.a976144-ubuntu-xenial-0ubuntu1 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Fri Jun 3 12:37:15 2016 ExecutablePath: /usr/bin/gnome-software InstallationDate: Installed on 2016-06-03 (0 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: gnome-software UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gnome-software (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial ** Summary changed: - Ubuntu Software says there are updated while Software Updater says there are none + Ubuntu Software says there are updates while Software Updater says there are none -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-software in Ubuntu. https://bugs.launchpad.net/bugs/1588801 Title: Ubuntu Software says there are updates while Software Updater says there are none Status in gnome-software package in Ubuntu: New Bug description: Steps: 1) Clean install Ubuntu 16.04 Desktop x86 64 2) Run Software Updater and install all updates. 3) Restart. 4) Run Software Updater again and observe there are no updates. 5) Run Ubuntu Software and observer there are updates. 6) Install the updates. Expected: Both update methods would have the same result, or one of them should not be installed by default. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: gnome-software 3.20.1+git20160426.1.a976144-ubuntu-xenial-0ubuntu1 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Fri Jun 3 12:37:15 2016 ExecutablePath: /usr/bin/gnome-software InstallationDate: Installed on 2016-06-03 (0 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: gnome-software UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1588801/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1588785] [NEW] Connect to WiFi does not work first time
Public bug reported: Steps to reproduce: 1) Delete any reference to your WiFi connection in "Edit Connections" and disconnect. 2) Find it in the WiFi list (from the applet) and click it. 3) Type your WiFi password and hit enter. 4) The password window goes away but no WiFi connection is established. 5) Open "Edit Connections" and observe that the WiFi password is blank. 6) Try again and it usually works. I would expect it to connect first time and for the password to be stored and showing in "Edit Connections". This has been tried with a fresh 16.04 install both without any updates and with all latest updates. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: network-manager-gnome 1.2.0-0ubuntu0.16.04.1 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Fri Jun 3 12:25:54 2016 ExecutablePath: /usr/bin/nm-applet IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2016-06-03 (0 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) IpRoute: default via 192.168.43.1 dev wlp1s0 proto static metric 600 169.254.0.0/16 dev wlp1s0 scope link metric 1000 192.168.43.0/24 dev wlp1s0 proto kernel scope link src 192.168.43.218 metric 600 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_GB.UTF-8 SHELL=/bin/bash RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: network-manager-applet UpgradeStatus: No upgrade log present (probably fresh install) nmcli-dev: DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH wlp1s0 wifi connected /org/freedesktop/NetworkManager/Devices/0 HTC Portable Hotspot DF99 1fa9f4e3-6435-4c48-a834-e75c51ddd146 /org/freedesktop/NetworkManager/ActiveConnection/9 lo loopback unmanaged /org/freedesktop/NetworkManager/Devices/1 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. ** Affects: network-manager-applet (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial ** Description changed: Steps to reproduce: 1) Delete any reference to your WiFi connection in "Edit Connections" and disconnect. 2) Find it in the WiFi list (from the applet) and click it. - 3) Type your WiFi password. - 4) Nothing happens. + 3) Type your WiFi password and hit enter. + 4) The password window goes away but no WiFi connection is established. 5) Open "Edit Connections" and observe that the WiFi password is blank. 6) Try again and it usually works. I would expect it to connect first time and for the password to be stored and showing in "Edit Connections". This has been tried with a fresh 16.04 install both without any updates and with all latest updates. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: network-manager-gnome 1.2.0-0ubuntu0.16.04.1 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Fri Jun 3 12:25:54 2016 ExecutablePath: /usr/bin/nm-applet IfupdownConfig: - # interfaces(5) file used by ifup(8) and ifdown(8) - auto lo - iface lo inet loopback + # interfaces(5) file used by ifup(8) and ifdown(8) + auto lo + iface lo inet loopback InstallationDate: Installed on 2016-06-03 (0 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) IpRoute: - default via 192.168.43.1 dev wlp1s0 proto static metric 600 - 169.254.0.0/16 dev wlp1s0 scope link metric 1000 - 192.168.43.0/24 dev wlp1s0 proto kernel scope link src 192.168.43.218 metric 600 + default via 192.168.43.1 dev wlp1s0 proto static metric 600 + 169.254.0.0/16 dev wlp1s0 scope link metric 1000 + 192.168.43.0/24 dev wlp1s0 proto kernel scope link src 192.168.43.218 metric 600 NetworkManager.state: - [main] - NetworkingEnabled=true - WirelessEnabled=true - WWANEnabled=true + [main] + NetworkingEnabled=true + WirelessEnabled=true + WWANEnabled=true ProcEnviron: - LANGUAGE=en_GB:en - PATH=(custom, no user) - XDG_RUNTIME_DIR= - LANG=en_GB.UTF-8 - SHELL=/bin/bash + LANGUAGE=en_GB:en + PATH=(custom, no user) + XDG_RUNTIME_DIR= + LANG=en_GB.UTF-8 + SHELL=/bin/bash RfKill: - 0: phy0: Wireless LAN - Soft blocked: no - Hard blocked: no + 0: phy0: Wireless LAN + Soft blocked: no + Hard blocked: no SourcePackage: network-manager-applet UpgradeStatus: No upgrade log present
[Desktop-packages] [Bug 1572640] Re: cursor invisible after timeout and screen-saving
*** This bug is a duplicate of bug 1568604 *** https://bugs.launchpad.net/bugs/1568604 I suspect this is related to bug # 1568604 and after a chat, I (read as we) are going to mark it as duplicate. When the fix comes out, if it does not solve this issue it can still be un-linked. ** This bug has been marked a duplicate of bug 1568604 Mouse cursor lost when unlocking with Intel graphics -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1572640 Title: cursor invisible after timeout and screen-saving Status in xserver-xorg-video-intel package in Ubuntu: Confirmed Bug description: When installed from the *Lubuntu alternate* ISO files, the default systems are affected by this bug: After time-out the screensaver kicks in and the user is locked out. At the unlock screen the cursor is visible, but after unlock the cursor is invisible. This bug does not affect the corresponding desktop ISO files, neither the live session nor the default installed systems. ISO files: The Lubuntu Xenial final version dated 20160419 xenial-alternate-i386.iso xenial-desktop-i386.iso xenial-alternate-amd64.iso xenial-desktop-amd64.iso Links to the computer specs: http://www.toshiba.se/laptops/satellite-pro/c850/satellite-pro-c850-19w https://shop.lenovo.com/ISS_Static/ww/wci/products/us/laptop/thinkpad/x-series/x131e-intel/X131e-Datasheet-Intel.pdf Link to detailed description: http://ubuntuforums.org/showthread.php?t=2321069=13473145#post13473145 The cursor appears again after logout and stays after login. This bug is similar to or the same as Bug #1568604: Mouse cursor lost when unlocking ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 ProcVersionSignature: Ubuntu 4.4.0-18.34-generic 4.4.6 Uname: Linux 4.4.0-18-generic x86_64 ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 CurrentDesktop: LXDE Date: Wed Apr 20 17:37:20 2016 InstallationDate: Installed on 2016-04-20 (0 days ago) InstallationMedia: Lubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160419) SourcePackage: xserver-xorg-video-intel UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1572640/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1458383] Re: gnome-disk-utilty does not allow swapoff of zram devices
This is expected behaviour within Lubuntu where the RAM overhead is quite large compared to what lubuntu itself needs to run. Where this not used, the minimal RAM for running a Live instance would be greater than we currently state as required. ** Changed in: gnome-disk-utility (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-disk-utility in Ubuntu. https://bugs.launchpad.net/bugs/1458383 Title: gnome-disk-utilty does not allow swapoff of zram devices Status in gnome-disk-utility package in Ubuntu: Invalid Bug description: To reproduce boot a lubuntu desktop image like wily image downloaded from zsync http://cdimage.ubuntu.com/lubuntu/daily-live/20150524/wily- desktop-amd64.iso.zsync Then boot into the live session and select try lubuntu without installing and from the main menu open acessories gnome disks. Click on the /dev/zram devices which are create equal to` nproc ` will show up but if I boot this live session on a mchaine that has swap partitions I get a stop button to perform swapoff of the device. swapon --summary outputs. filename TypeSizeUsedPriority /dev/sda2 partition 17407996 0 -1 /dev/sdc5 partition 13630460 0 -2 /dev/zram0partition 2013436 0 5 /dev/zram1partition 2013436 0 5 /dev/zram2partition 2013436 0 5 /dev/zram3partition 2013436 0 5 gnome-disk-utility: Installed: 3.16.0-1ubuntu1 Candidate: 3.16.0-1ubuntu1 Version table: *** 3.16.0-1ubuntu1 0 500 http://archive.ubuntu.com/ubuntu/ wily/main amd64 Packages 100 /var/lib/dpkg/status Description: Ubuntu Wily Werewolf (development branch) Release: 15.10 I expected the zram compressed ram device to be able to have the swap turned off in gnome-disks through the GUI. INstead I got options to format and benchamrk the zram device which don't work and nothing to swapoff the device. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: gnome-disk-utility 3.16.0-1ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 ApportVersion: 2.17.3-0ubuntu1 Architecture: amd64 CasperVersion: 1.360 CurrentDesktop: LXDE Date: Sun May 24 19:56:20 2015 LiveMediaBuild: Lubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150524) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gnome-disk-utility UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-disk-utility/+bug/1458383/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1531824] Re: Xorg freeze
** Attachment added: "i915_error_state taken from the terminal during a freeze." https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1531824/+attachment/4545516/+files/i915_error_state -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1531824 Title: Xorg freeze Status in xorg package in Ubuntu: New Bug description: Symptoms: * Video is frozen. Observations: * Mouse moves normally. * There is no hard-disc activity. * Once minute or so the video will respond like it's doing so a frame at a time. * Pressing CTRL+ALT+F6 and then waiting a minute or so puts you into a terminal. * Text terminals work normally without any problems. * Pressing ALT+F7 from a text terminal puts you into either black frozen screen or a frozen graphical display. * Restarting LightDM doesn't resolve the problem, it shows the login screen and freezes. When does it occur: * More often than not on or immediately after resume from suspend. * Occasionally, but not very often, during normal use. * It occurs several times a week, usually after several hours of suspend. It started a few months ago. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.16.0-57.77~14.04.1-generic 3.16.7-ckt20 Uname: Linux 3.16.0-57-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.19 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Thu Jan 7 11:29:40 2016 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: virtualbox, 4.3.34, 3.16.0-56-generic, x86_64: installed virtualbox, 4.3.34, 3.16.0-57-generic, x86_64: installed ExtraDebuggingInterest: Yes GpuHangFrequency: Several times a week GpuHangReproducibility: Occurs more often under certain circumstances GpuHangStarted: Since a couple weeks or more GraphicsCard: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8276] Subsystem: ASUSTeK Computer Inc. Device [1043:8276] InstallationDate: Installed on 2015-07-13 (177 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) MachineType: System manufacturer V-P5G45 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-57-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display Title: Xorg freeze UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/18/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0405 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: V-P5G45 dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0405:bd05/18/2009:svnSystemmanufacturer:pnV-P5G45:pvrSystemVersion:rvnASUSTeKComputerINC.:rnV-P5G45:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: V-P5G45 dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri N/A version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A xserver.bootTime: Thu Jan 7 11:11:57 2016 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 41085 vendor DEL xserver.version: 2:1.16.0-1ubuntu1.2~trusty2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1531824/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1531824] Re: Xorg freeze
** Attachment added: "DMESG taken from the terminal during a freeze." https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1531824/+attachment/4545514/+files/dmesg.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1531824 Title: Xorg freeze Status in xorg package in Ubuntu: New Bug description: Symptoms: * Video is frozen. Observations: * Mouse moves normally. * There is no hard-disc activity. * Once minute or so the video will respond like it's doing so a frame at a time. * Pressing CTRL+ALT+F6 and then waiting a minute or so puts you into a terminal. * Text terminals work normally without any problems. * Pressing ALT+F7 from a text terminal puts you into either black frozen screen or a frozen graphical display. * Restarting LightDM doesn't resolve the problem, it shows the login screen and freezes. When does it occur: * More often than not on or immediately after resume from suspend. * Occasionally, but not very often, during normal use. * It occurs several times a week, usually after several hours of suspend. It started a few months ago. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.16.0-57.77~14.04.1-generic 3.16.7-ckt20 Uname: Linux 3.16.0-57-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.19 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Thu Jan 7 11:29:40 2016 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: virtualbox, 4.3.34, 3.16.0-56-generic, x86_64: installed virtualbox, 4.3.34, 3.16.0-57-generic, x86_64: installed ExtraDebuggingInterest: Yes GpuHangFrequency: Several times a week GpuHangReproducibility: Occurs more often under certain circumstances GpuHangStarted: Since a couple weeks or more GraphicsCard: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8276] Subsystem: ASUSTeK Computer Inc. Device [1043:8276] InstallationDate: Installed on 2015-07-13 (177 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) MachineType: System manufacturer V-P5G45 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-57-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display Title: Xorg freeze UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/18/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0405 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: V-P5G45 dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0405:bd05/18/2009:svnSystemmanufacturer:pnV-P5G45:pvrSystemVersion:rvnASUSTeKComputerINC.:rnV-P5G45:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: V-P5G45 dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri N/A version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A xserver.bootTime: Thu Jan 7 11:11:57 2016 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 41085 vendor DEL xserver.version: 2:1.16.0-1ubuntu1.2~trusty2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1531824/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1530323] Re: The input box for editing a Wired connection static IP address doesn't appear correctly
** Also affects: lubuntu-default-settings Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager-applet in Ubuntu. https://bugs.launchpad.net/bugs/1530323 Title: The input box for editing a Wired connection static IP address doesn't appear correctly Status in Lubuntu default settings: New Status in ubuntu-mate: New Status in Ubuntu Kylin: New Status in network-manager-applet package in Ubuntu: Confirmed Bug description: Configuration: PC: Dell-Vostro-260s OS: UK16.04-1230-Daily-amd64 APP: network-manager-gnome The input box for IP doesn't appear correctly in the edit window of Wired connection. 在有线网络连接编辑页面进行手动配置网络时,IP地址设置栏由于输入框过大,输入过程中无法显示全键入数字,最大化后可正常查看。 To manage notifications about this bug go to: https://bugs.launchpad.net/lubuntu-default-settings/+bug/1530323/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1511463] [NEW] Minimised window vanishes and can't reconnect
Public bug reported: Start Remmina, connect to an RDP session then minimise the window. The minimise animation works as normal but afterwards the window icon disappears from the unity launcher. Selecting same connection in the notification icon menu shows the "connecting" message then dies. You have to kill remmina to start again. You can minimise the window using the window buttons, or the big orange down arrow provided by remmina, the outcome is the same. This must be a regression as it worked earlier this year. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: remmina 1.0.0-4ubuntu3 ProcVersionSignature: Ubuntu 3.16.0-50.67~14.04.1-generic 3.16.7-ckt16 Uname: Linux 3.16.0-50-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.18 Architecture: amd64 CurrentDesktop: Unity Date: Thu Oct 29 16:51:18 2015 ExecutablePath: /usr/bin/remmina InstallationDate: Installed on 2015-07-13 (108 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: remmina UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: remmina (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to remmina in Ubuntu. https://bugs.launchpad.net/bugs/1511463 Title: Minimised window vanishes and can't reconnect Status in remmina package in Ubuntu: New Bug description: Start Remmina, connect to an RDP session then minimise the window. The minimise animation works as normal but afterwards the window icon disappears from the unity launcher. Selecting same connection in the notification icon menu shows the "connecting" message then dies. You have to kill remmina to start again. You can minimise the window using the window buttons, or the big orange down arrow provided by remmina, the outcome is the same. This must be a regression as it worked earlier this year. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: remmina 1.0.0-4ubuntu3 ProcVersionSignature: Ubuntu 3.16.0-50.67~14.04.1-generic 3.16.7-ckt16 Uname: Linux 3.16.0-50-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.18 Architecture: amd64 CurrentDesktop: Unity Date: Thu Oct 29 16:51:18 2015 ExecutablePath: /usr/bin/remmina InstallationDate: Installed on 2015-07-13 (108 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: remmina UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/remmina/+bug/1511463/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1341279] Re: Num Lock turned off when log-in page shown
I'm aware of the work configuration workaround detailed in your link but I think the lightdm should respect the BIOS settings and not require further configuration. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1341279 Title: Num Lock turned off when log-in page shown Status in lightdm package in Ubuntu: Incomplete Bug description: Whenever the log-in page shows, num lock is turned off. It's OK when unlocking, the state is preserved, it's just on start-up or after a log-out. To reproduce either turn on Num Lock then log-out, or set Num Lock on in the BIOS (as I do) and start the machine. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: lightdm 1.10.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-32.56-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CurrentDesktop: Unity Date: Sun Jul 13 13:25:19 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2013-05-07 (431 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: lightdm UpgradeStatus: Upgraded to trusty on 2014-04-28 (76 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1341279/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1488493] Re: Application window stops responding if network-accessed file because temporarily unavailable
** Bug watch added: GNOME Bug Tracker #755889 https://bugzilla.gnome.org/show_bug.cgi?id=755889 ** Also affects: gedit via https://bugzilla.gnome.org/show_bug.cgi?id=755889 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gedit in Ubuntu. https://bugs.launchpad.net/bugs/1488493 Title: Application window stops responding if network-accessed file because temporarily unavailable Status in gedit: Unknown Status in gedit package in Ubuntu: New Bug description: 1) Create a virtual linux server using libvirt or anything with a pause button, SSH enabled. 2) Using nautilus to open an SFTP connection to it (sftp://myserver.local). 3) Open a file using gedit from nautilus. 4) Pause the server in libvirt. 5) Try typing something. 6) The window turns grey until you un-pause the server. As accessing the file is not an essential activity when you're typing, I would not expect the window to hang, I would expect it to carry on as though nothing had happened. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: gedit 3.10.4-0ubuntu4 ProcVersionSignature: Ubuntu 3.16.0-46.62~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-46-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Tue Aug 25 13:37:58 2015 InstallationDate: Installed on 2015-07-13 (42 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) SourcePackage: gedit UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/gedit/+bug/1488493/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1497742] [NEW] Clicks and noise over S/PDIF at 44100Hz
Public bug reported: Bus 002 Device 005: ID 0d8c:0102 C-Media Electronics, Inc. CM106 Like Sound Device connected using S/PDIF optical out. Playing audio at 44100Hz has clicks and a quiet cyclical noise at roughly 5 cycles per second. The noise is like a really quiet shaker. Clicking seems random and of varying intensity. Affects multiple applications including Rhythmbox and Kodi. Even `aplay` using a raw CD file copied to disk. Higher playback rates of 48000Hz are clean and work fine with AC3 and DTS encoded pass-through. I tested this in Kodi where you can pick the playback rate with on-the-fly re-sampling. Same sound re-sampled and played at 48000Hz plays flawlessly, everything at 44100Hz has the problem. Previous sound card (integrated) is fine. HDMI output is also fine. Tried the `tsched=0` workaround, did not work. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu11.1 ProcVersionSignature: Ubuntu 3.16.0-49.65~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-49-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.13 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: mediacentre 3018 F pulseaudio /dev/snd/controlC0: mediacentre 3018 F pulseaudio CurrentDesktop: Unity CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied Date: Sun Sep 20 15:10:57 2015 InstallationDate: Installed on 2015-07-02 (80 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/21/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: E1681IG6 VER.109 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: To be filled by O.E.M. dmi.board.vendor: Micro-Star International dmi.board.version: Ver.001 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: Micro-Star International dmi.chassis.version: Ver.001 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrE1681IG6VER.109:bd07/21/2010:svnMicro-StarInternational:pnCalpellaplatform:pvrVer.001:rvnMicro-StarInternational:rnTobefilledbyO.E.M.:rvrVer.001:cvnMicro-StarInternational:ct9:cvrVer.001: dmi.product.name: Calpella platform dmi.product.version: Ver.001 dmi.sys.vendor: Micro-Star International modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2015-09-20T15:04:55.963646 ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty ** Description changed: Bus 002 Device 005: ID 0d8c:0102 C-Media Electronics, Inc. CM106 Like Sound Device connected using S/PDIF optical out. - Playing audio at 41000Hz has clicks and a quiet cyclical noise at + Playing audio at 44100Hz has clicks and a quiet cyclical noise at roughly 5 cycles per second. The noise is like a really quiet shaker. Clicking seems random and of varying intensity. Affects multiple applications including Rhythmbox and Kodi. Even `aplay` using a raw CD file copied to disk. Higher playback rates of 48000Hz are clean and work fine with AC3 and DTS encoded pass-through. I tested this in Kodi where you can pick the playback rate with on-the-fly re-sampling. Same sound re-sampled and - played at 48000Hz plays flawlessly, everything at 41000Hz has the + played at 48000Hz plays flawlessly, everything at 44100Hz has the problem. Previous sound card (integrated) is fine. HDMI output is also fine. Tried the `tsched=0` workaround, did not work. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu11.1 ProcVersionSignature: Ubuntu 3.16.0-49.65~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-49-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.13 Architecture: amd64 AudioDevicesInUse: - USERPID ACCESS COMMAND - /dev/snd/controlC1: mediacentre 3018 F pulseaudio - /dev/snd/controlC0: mediacentre 3018 F pulseaudio + USERPID ACCESS COMMAND + /dev/snd/controlC1: mediacentre 3018 F pulseaudio + /dev/snd/controlC0: mediacentre 3018 F pulseaudio CurrentDesktop: Unity CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied Date: Sun Sep 20 15:10:57 2015 InstallationDate: Installed on 2015-07-02 (80 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/21/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: E1681IG6 VER.109 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: To be filled by O.E.M. dmi.board.vendor: Micro-Star International dmi.board.version:
[Desktop-packages] [Bug 1495063] [NEW] Networking occasionally doesn't recover from suspend
Public bug reported: Occasionally, networking is disabled upon recovery from suspend. Clicking "Enable Networking" on the menu from the notification icon has no effect. It requires network-manager to be restarted with `service network-manager restart`. I can't identify a pattern to the problem. I can suspend the computer for minutes or hours without it happening. I've not noticed it on other computers running 14.04 that I have, so it's probably limited to my this particular hardware. I didn't notice it on previous versions of Ubuntu on this hardware. However, due to the nature of the problem it will not be practical to bisect the kernel as I don't have a reliable method of reproducing the fault as of yet. My network devices are as follows (I use the wireless one only): Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02) Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01) ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: network-manager 0.9.8.8-0ubuntu7.1 ProcVersionSignature: Ubuntu 3.16.0-48.64~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-48-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Sat Sep 12 12:44:30 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-07-13 (60 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) IpRoute: default via 192.168.1.1 dev wlan1 proto static 192.168.1.0/24 dev wlan1 proto kernel scope link src 192.168.1.2 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME UUID TYPE TIMESTAMPTIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH HTC Portable Hotspot DF99 b31b75bc-5b76-4592-9b4a-d9d860ea34aa 802-11-wireless 1441832180 Wed 09 Sep 2015 21:56:20 BST yes no /org/freedesktop/NetworkManager/Settings/1 TALKTALK-D069DC 700ea4cb-a660-479e-aa32-c00ad71e9064 802-11-wireless 1442058263 Sat 12 Sep 2015 12:44:23 BST yes no /org/freedesktop/NetworkManager/Settings/0 nmcli-dev: DEVICE TYPE STATE DBUS-PATH eth1 802-3-ethernetunavailable /org/freedesktop/NetworkManager/Devices/1 wlan1 802-11-wireless connected /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.8.8connected enabled enabled enabledenabled enabled ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1495063 Title: Networking occasionally doesn't recover from suspend Status in network-manager package in Ubuntu: New Bug description: Occasionally, networking is disabled upon recovery from suspend. Clicking "Enable Networking" on the menu from the notification icon has no effect. It requires network-manager to be restarted with `service network-manager restart`. I can't identify a pattern to the problem. I can suspend the computer for minutes or hours without it happening. I've not noticed it on other computers running 14.04 that I have, so it's probably limited to my this particular hardware. I didn't notice it on previous versions of Ubuntu on this hardware. However, due to the nature of the problem it will not be practical to bisect the kernel as I don't have a reliable method of reproducing the fault as of yet. My network devices are as follows (I use the wireless one only): Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02) Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01) ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: network-manager 0.9.8.8-0ubuntu7.1 ProcVersionSignature: Ubuntu 3.16.0-48.64~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-48-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Sat Sep 12 12:44:30 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and
[Desktop-packages] [Bug 1492141] [NEW] Scroll bar widget disappears when mouse moves over it
Public bug reported: When looking at "SMART Data & Self-Tests" for a drive, the scroll-bar widget appears at the usual place when the pointer moves towards it from the left, but disappears either as soon as the mouse reaches it, or immediately after mouse-down. Scrolling is impossible, except using keyboard. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: gnome-disk-utility 3.10.0-1ubuntu3 ProcVersionSignature: Ubuntu 3.16.0-46.62~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-46-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Fri Sep 4 08:28:53 2015 ExecutablePath: /usr/bin/gnome-disks InstallationDate: Installed on 2015-07-13 (52 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: gnome-disk-utility UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gnome-disk-utility (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-disk-utility in Ubuntu. https://bugs.launchpad.net/bugs/1492141 Title: Scroll bar widget disappears when mouse moves over it Status in gnome-disk-utility package in Ubuntu: New Bug description: When looking at "SMART Data & Self-Tests" for a drive, the scroll-bar widget appears at the usual place when the pointer moves towards it from the left, but disappears either as soon as the mouse reaches it, or immediately after mouse-down. Scrolling is impossible, except using keyboard. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: gnome-disk-utility 3.10.0-1ubuntu3 ProcVersionSignature: Ubuntu 3.16.0-46.62~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-46-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Fri Sep 4 08:28:53 2015 ExecutablePath: /usr/bin/gnome-disks InstallationDate: Installed on 2015-07-13 (52 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: gnome-disk-utility UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-disk-utility/+bug/1492141/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1488493] [NEW] Application window stops responding if network-accessed file because temporarily unavailable
Public bug reported: 1) Create a virtual linux server using libvirt or anything with a pause button, SSH enabled. 2) Using nautilus to open an SFTP connection to it (sftp://myserver.local). 3) Open a file using gedit from nautilus. 4) Pause the server in libvirt. 5) Try typing something. 6) The window turns grey until you un-pause the server. As accessing the file is not an essential activity when you're typing, I would not expect the window to hang, I would expect it to carry on as though nothing had happened. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: gedit 3.10.4-0ubuntu4 ProcVersionSignature: Ubuntu 3.16.0-46.62~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-46-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Tue Aug 25 13:37:58 2015 InstallationDate: Installed on 2015-07-13 (42 days ago) InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150218.1) SourcePackage: gedit UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gedit (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gedit in Ubuntu. https://bugs.launchpad.net/bugs/1488493 Title: Application window stops responding if network-accessed file because temporarily unavailable Status in gedit package in Ubuntu: New Bug description: 1) Create a virtual linux server using libvirt or anything with a pause button, SSH enabled. 2) Using nautilus to open an SFTP connection to it (sftp://myserver.local). 3) Open a file using gedit from nautilus. 4) Pause the server in libvirt. 5) Try typing something. 6) The window turns grey until you un-pause the server. As accessing the file is not an essential activity when you're typing, I would not expect the window to hang, I would expect it to carry on as though nothing had happened. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: gedit 3.10.4-0ubuntu4 ProcVersionSignature: Ubuntu 3.16.0-46.62~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-46-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Tue Aug 25 13:37:58 2015 InstallationDate: Installed on 2015-07-13 (42 days ago) InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150218.1) SourcePackage: gedit UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gedit/+bug/1488493/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1487546] [NEW] Newly copied files report zero (0) file size
Public bug reported: 1) Boot into the standard Ubuntu session. 2) Connect an MTP device (I've used HTC One M8 and Tesco Hudl, although both required a udev rule entry to get them to mount automatically) 3) Copy a file to the device using `cp` in a terminal (not Nautilus). 4) Check it's size, it reads zero. 5) Check size in a Nautilus, it reads zero. 6) Unmount the device in Nautilus. 7) Remount the device in Nautilus. 8) Check file size again, it will be correct. Copying files using Nautilus appears to work properly, but this excludes the use of a wide range of utilities, such as `cp`, `rsync` and the like. This may be a gvfs-fuse issue or gvfs-backend issue, feel free to change, I wasn't sure. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: gvfs 1.20.3-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.16.0-46.62~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-46-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Fri Aug 21 17:23:21 2015 InstallationDate: Installed on 2015-07-13 (39 days ago) InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150218.1) SourcePackage: gvfs UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gvfs (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1487546 Title: Newly copied files report zero (0) file size Status in gvfs package in Ubuntu: New Bug description: 1) Boot into the standard Ubuntu session. 2) Connect an MTP device (I've used HTC One M8 and Tesco Hudl, although both required a udev rule entry to get them to mount automatically) 3) Copy a file to the device using `cp` in a terminal (not Nautilus). 4) Check it's size, it reads zero. 5) Check size in a Nautilus, it reads zero. 6) Unmount the device in Nautilus. 7) Remount the device in Nautilus. 8) Check file size again, it will be correct. Copying files using Nautilus appears to work properly, but this excludes the use of a wide range of utilities, such as `cp`, `rsync` and the like. This may be a gvfs-fuse issue or gvfs-backend issue, feel free to change, I wasn't sure. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: gvfs 1.20.3-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.16.0-46.62~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-46-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Fri Aug 21 17:23:21 2015 InstallationDate: Installed on 2015-07-13 (39 days ago) InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150218.1) SourcePackage: gvfs UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1487546/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1463190] Re: HTC One M8 mounted as gphoto not mtp
It's possible to add a `udev` rule to fix this, so I'm guessing `udev` is the more appropriate package. Here are the rules for this and the Tesco Hudl while we're at it. ``` # HTC One M8 ATTR{idVendor}==0bb4, ATTR{idProduct}==0f25, SYMLINK+=libmtp-%k, ENV{ID_MTP_DEVICE}=1, ENV{ID_MEDIA_PLAYER}=1 # Tesco Hudl ATTR{idVendor}==0e79, ATTR{idProduct}==5008, SYMLINK+=libmtp-%k, ENV{ID_MTP_DEVICE}=1, ENV{ID_MEDIA_PLAYER}=1 ``` ** Package changed: gvfs (Ubuntu) = udev (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1463190 Title: HTC One M8 mounted as gphoto not mtp Status in udev package in Ubuntu: New Bug description: On one an HTC One M8 auto-mounts in gvfs with an mtp:// location. On the other (the computer used to report this bug) it mounts with a gphoto2:// location. Pressing CTRL+L in Nautilus and entering the appropriate mtp:// location manually mounts the device correctly and it works just fine, but leaves the gphoto:// mounts in the left-hand panel. gphoto:// is not appropriate for this device and does not support reading and writing of all file types. I have another computer with 14.04 installed which mounts the phone with an mtp:// location automatically. I'm not sure why my other computer is working but I don't remember doing anything to make it work and they appear to have the same package versions installed for mtp and gvfs packages - although I don't know if I checked them all as I'm not familiar with which packages are used. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: gvfs 1.20.3-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.13.0-54.91-generic 3.13.11-ckt20 Uname: Linux 3.13.0-54-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CurrentDesktop: Unity Date: Mon Jun 8 22:56:34 2015 EcryptfsInUse: Yes InstallationDate: Installed on 2013-05-07 (762 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) SourcePackage: gvfs UpgradeStatus: Upgraded to trusty on 2014-04-28 (406 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/udev/+bug/1463190/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1168293] Re: No Certificate dialog not responding
*** This bug is a duplicate of bug 1130326 *** https://bugs.launchpad.net/bugs/1130326 I'm working with 14.04 and I am also affected. For me it's not a private issue but affects my (and some colleges') development environments at my job. Quite inconvenient. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1168293 Title: No Certificate dialog not responding Status in gnome-control-center package in Ubuntu: Confirmed Bug description: I'm using ubuntu 13.04 (raring ringtail) beta, with gnome-shell. I try to connect to a secure wi-fi network (eduroam). I enter my login and password, but no certificate -- I'm instructed by my university to ignore the warning (I know this is bad, but...). Said warning appears (dialog entitled No Certificate Authority certificate chosen), but it is completely frozen. Neither the Don't warn me again checkbox, or the button react to my clicks. The window manager can not even close the dialog, I have to xkill it. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1168293/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1468812] Re: HTC One M8 MTP fails while copying files
** Changed in: libmtp (Ubuntu) Status: New = Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libmtp in Ubuntu. https://bugs.launchpad.net/bugs/1468812 Title: HTC One M8 MTP fails while copying files Status in libmtp package in Ubuntu: Invalid Bug description: Usually this device mounts with both internal and SD card storage appearing in an Android Phone folder in nautilus. Sometimes this does not work straight away. During copying several megabytes of images, with the phone screen on and unlocked, a message appears indicating an error copying. Most files are copied, even though the progress bar seems to stop at around 30%. All attempts to access the device in nautilus result in and empty set of results where the files normally appear. Removing then re-inserting the USB plug gives the message Unable to mount Android Phone Unable to open MTP device '[usb:002,008]' in a pop-up message. mtp-detect reports: Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6 Listing raw device(s) Device 0 (VID=0bb4 and PID=0f25) is UNKNOWN. Please report this VID/PID and the device model to the libmtp development team Found 1 device(s): 0bb4:0f25 @ bus 2, dev 8 Attempting to connect device(s) ignoring libusb_claim_interface() = -6PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 OK. I have tried adding the following udev rule to resolve this: $ cat /etc/udev/rules.d/69-libmtp.rules # HTC One M8 ATTR{idVendor}==0bb4, ATTR{idProduct}==0f25, SYMLINK+=libmtp-%k, MODE=660, GROUP=audio, ENV{ID_MTP_DEVICE}=1, ENV{ID_MEDIA_PLAYER}=1 I've tried using a different USB port but this has no effect. Eventually, after removing and re-inserting the USB cable and being patient, it starts working again and it's possible to access the files again, but the problem re-occurs very quickly. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: libmtp-common 1.1.6-20-g1b9f164-1ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-55.94-generic 3.13.11-ckt20 Uname: Linux 3.13.0-55-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CurrentDesktop: Unity Date: Thu Jun 25 16:52:57 2015 Dependencies: EcryptfsInUse: Yes InstallationDate: Installed on 2013-05-03 (783 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) PackageArchitecture: all SourcePackage: libmtp UpgradeStatus: Upgraded to trusty on 2014-05-21 (399 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libmtp/+bug/1468812/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1468812] Re: HTC One M8 MTP fails while copying files
I've ran some experiments that may be useful. If, after pasting into the phone's folder in Nautilus, I close the nautilus window, the copy seems to work more often than not. I've tried this three times with success, once without, same data. I've never had it work if I leave the Nautilus window open. I get an error after about 30 seconds or so libmtp error: Could not send object.. This puts the MTP connection into the unusable state and it can't be re-mounted, even after unplugging the cable. It has never worked when leaving the window open, although it could be luck rather than something directly connected to the problem. Restarting the computer appears to have no effect. I've tried the a couple of times. Restarting the phone appears to recover from the fault instantly (giving the SD card a few seconds to mount up). I've tried this several times now. I also downgraded the backports and proposed packages, this appears to have had no effect at all. The results are not entirely consistent, but I hope this apparent pattern might lead to some useful speculation. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libmtp in Ubuntu. https://bugs.launchpad.net/bugs/1468812 Title: HTC One M8 MTP fails while copying files Status in libmtp package in Ubuntu: New Bug description: Usually this device mounts with both internal and SD card storage appearing in an Android Phone folder in nautilus. Sometimes this does not work straight away. During copying several megabytes of images, with the phone screen on and unlocked, a message appears indicating an error copying. Most files are copied, even though the progress bar seems to stop at around 30%. All attempts to access the device in nautilus result in and empty set of results where the files normally appear. Removing then re-inserting the USB plug gives the message Unable to mount Android Phone Unable to open MTP device '[usb:002,008]' in a pop-up message. mtp-detect reports: Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6 Listing raw device(s) Device 0 (VID=0bb4 and PID=0f25) is UNKNOWN. Please report this VID/PID and the device model to the libmtp development team Found 1 device(s): 0bb4:0f25 @ bus 2, dev 8 Attempting to connect device(s) ignoring libusb_claim_interface() = -6PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 OK. I have tried adding the following udev rule to resolve this: $ cat /etc/udev/rules.d/69-libmtp.rules # HTC One M8 ATTR{idVendor}==0bb4, ATTR{idProduct}==0f25, SYMLINK+=libmtp-%k, MODE=660, GROUP=audio, ENV{ID_MTP_DEVICE}=1, ENV{ID_MEDIA_PLAYER}=1 I've tried using a different USB port but this has no effect. Eventually, after removing and re-inserting the USB cable and being patient, it starts working again and it's possible to access the files again, but the problem re-occurs very quickly. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: libmtp-common 1.1.6-20-g1b9f164-1ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-55.94-generic 3.13.11-ckt20 Uname: Linux 3.13.0-55-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CurrentDesktop: Unity Date: Thu Jun 25 16:52:57 2015 Dependencies: EcryptfsInUse: Yes InstallationDate: Installed on 2013-05-03 (783 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) PackageArchitecture: all SourcePackage: libmtp UpgradeStatus: Upgraded to trusty on 2014-05-21 (399 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libmtp/+bug/1468812/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1468812] [NEW] HTC One M8 MTP fails while copying files
Public bug reported: Usually this device mounts with both internal and SD card storage appearing in an Android Phone folder in nautilus. Sometimes this does not work straight away. During copying several megabytes of images, with the phone screen on and unlocked, a message appears indicating an error copying. Most files are copied, even though the progress bar seems to stop at around 30%. All attempts to access the device in nautilus result in and empty set of results where the files normally appear. Removing then re-inserting the USB plug gives the message Unable to mount Android Phone Unable to open MTP device '[usb:002,008]' in a pop- up message. mtp-detect reports: Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6 Listing raw device(s) Device 0 (VID=0bb4 and PID=0f25) is UNKNOWN. Please report this VID/PID and the device model to the libmtp development team Found 1 device(s): 0bb4:0f25 @ bus 2, dev 8 Attempting to connect device(s) ignoring libusb_claim_interface() = -6PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 OK. I have tried adding the following udev rule to resolve this: $ cat /etc/udev/rules.d/69-libmtp.rules # HTC One M8 ATTR{idVendor}==0bb4, ATTR{idProduct}==0f25, SYMLINK+=libmtp-%k, MODE=660, GROUP=audio, ENV{ID_MTP_DEVICE}=1, ENV{ID_MEDIA_PLAYER}=1 I've tried using a different USB port but this has no effect. Eventually, after removing and re-inserting the USB cable and being patient, it starts working again and it's possible to access the files again, but the problem re-occurs very quickly. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: libmtp-common 1.1.6-20-g1b9f164-1ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-55.94-generic 3.13.11-ckt20 Uname: Linux 3.13.0-55-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CurrentDesktop: Unity Date: Thu Jun 25 16:52:57 2015 Dependencies: EcryptfsInUse: Yes InstallationDate: Installed on 2013-05-03 (783 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) PackageArchitecture: all SourcePackage: libmtp UpgradeStatus: Upgraded to trusty on 2014-05-21 (399 days ago) ** Affects: libmtp (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libmtp in Ubuntu. https://bugs.launchpad.net/bugs/1468812 Title: HTC One M8 MTP fails while copying files Status in libmtp package in Ubuntu: New Bug description: Usually this device mounts with both internal and SD card storage appearing in an Android Phone folder in nautilus. Sometimes this does not work straight away. During copying several megabytes of images, with the phone screen on and unlocked, a message appears indicating an error copying. Most files are copied, even though the progress bar seems to stop at around 30%. All attempts to access the device in nautilus result in and empty set of results where the files normally appear. Removing then re-inserting the USB plug gives the message Unable to mount Android Phone Unable to open MTP device '[usb:002,008]' in a pop-up message. mtp-detect reports: Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6 Listing raw device(s) Device 0 (VID=0bb4 and PID=0f25) is UNKNOWN. Please report this VID/PID and the device model to the libmtp development team Found 1 device(s): 0bb4:0f25 @ bus 2, dev 8 Attempting to connect device(s) ignoring libusb_claim_interface() = -6PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 OK. I have tried adding the following udev rule to resolve this: $ cat /etc/udev/rules.d/69-libmtp.rules # HTC One M8 ATTR{idVendor}==0bb4, ATTR{idProduct}==0f25, SYMLINK+=libmtp-%k, MODE=660, GROUP=audio, ENV{ID_MTP_DEVICE}=1, ENV{ID_MEDIA_PLAYER}=1 I've tried using a different USB port but this has no effect. Eventually, after removing and re-inserting the USB cable and being patient, it starts working again and it's possible to access the files again, but the problem re-occurs very quickly. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: libmtp-common 1.1.6-20-g1b9f164-1ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-55.94-generic 3.13.11-ckt20 Uname: Linux 3.13.0-55-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CurrentDesktop: Unity Date: Thu Jun 25 16:52:57 2015 Dependencies: EcryptfsInUse: Yes InstallationDate: Installed on 2013-05-03 (783 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
[Desktop-packages] [Bug 1463190] [NEW] HTC One M8 mounted as gphoto not mtp
Public bug reported: On one an HTC One M8 auto-mounts in gvfs with an mtp:// location. On the other (the computer used to report this bug) it mounts with a gphoto2:// location. Pressing CTRL+L in Nautilus and entering the appropriate mtp:// location manually mounts the device correctly and it works just fine, but leaves the gphoto:// mounts in the left-hand panel. gphoto:// is not appropriate for this device and does not support reading and writing of all file types. I have another computer with 14.04 installed which mounts the phone with an mtp:// location automatically. I'm not sure why my other computer is working but I don't remember doing anything to make it work and they appear to have the same package versions installed for mtp and gvfs packages - although I don't know if I checked them all as I'm not familiar with which packages are used. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: gvfs 1.20.3-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.13.0-54.91-generic 3.13.11-ckt20 Uname: Linux 3.13.0-54-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CurrentDesktop: Unity Date: Mon Jun 8 22:56:34 2015 EcryptfsInUse: Yes InstallationDate: Installed on 2013-05-07 (762 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) SourcePackage: gvfs UpgradeStatus: Upgraded to trusty on 2014-04-28 (406 days ago) ** Affects: gvfs (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug package-from-proposed trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1463190 Title: HTC One M8 mounted as gphoto not mtp Status in gvfs package in Ubuntu: New Bug description: On one an HTC One M8 auto-mounts in gvfs with an mtp:// location. On the other (the computer used to report this bug) it mounts with a gphoto2:// location. Pressing CTRL+L in Nautilus and entering the appropriate mtp:// location manually mounts the device correctly and it works just fine, but leaves the gphoto:// mounts in the left-hand panel. gphoto:// is not appropriate for this device and does not support reading and writing of all file types. I have another computer with 14.04 installed which mounts the phone with an mtp:// location automatically. I'm not sure why my other computer is working but I don't remember doing anything to make it work and they appear to have the same package versions installed for mtp and gvfs packages - although I don't know if I checked them all as I'm not familiar with which packages are used. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: gvfs 1.20.3-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.13.0-54.91-generic 3.13.11-ckt20 Uname: Linux 3.13.0-54-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CurrentDesktop: Unity Date: Mon Jun 8 22:56:34 2015 EcryptfsInUse: Yes InstallationDate: Installed on 2013-05-07 (762 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) SourcePackage: gvfs UpgradeStatus: Upgraded to trusty on 2014-04-28 (406 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1463190/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 984093] Re: vino http server binds to external interfaces despite local_only configuration
Current situation on 14.04 LTS is the port 5800 is still open and currently responds to HTTP requests with: htmlheadtitleFile Not Found/title/head bodyh1File Not Found/h1/body/html Verified this was vino by killing it to see the port closed. Verified on a remote machine. In my testing I used the instructions in https://help.ubuntu.com/community/VNC/Servers were followed to allow only local connections. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to vino in Ubuntu. https://bugs.launchpad.net/bugs/984093 Title: vino http server binds to external interfaces despite local_only configuration Status in GNOME Remote Desktop: Fix Released Status in vino package in Ubuntu: Triaged Bug description: Environment: Debian Wheezy Vino 3.2.2-1+b1 Vino is configured for local access only via: gconftool-2 --set /desktop/gnome/remote_access/local_only --type bool true Vino's vnc server is only listening on localhost:5900 and no other interfaces - as expected. Vino's http server, though, is listening on all interfaces, despite the local_only configuration. The expected behaviour would be for all vino services, including the http server, to only bind to the localhost interface when configured accordingly. To manage notifications about this bug go to: https://bugs.launchpad.net/vino/+bug/984093/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1438801] [NEW] Remmina wont close using SSH tunnel when VNC server not running
Public bug reported: If you use Remmina to attempt a VNC connection using the SSH tunnelling feature causes client to behave inconsistently or become unresponsive if the VNC server is not running (but SSH is). Sometimes clicking Cancel does nothing and the program must be killed. Sometimes clicking Cancel works but attempts to close the main Remmina window does nothing and program must be killed. Sometimes the applet icon stops appearing even after Remmina is re-started. Seems to be worse the longer you leave the system attempting to connect. If you cancel quickly (within about ten seconds) there are no problems. If run from the console nothing appears in their after the plugin ... registered messages. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: remmina 1.0.0-4ubuntu3 ProcVersionSignature: Ubuntu 3.13.0-48.80-generic 3.13.11-ckt16 Uname: Linux 3.13.0-48-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.8 Architecture: amd64 CurrentDesktop: Unity Date: Tue Mar 31 17:45:18 2015 EcryptfsInUse: Yes ExecutablePath: /usr/bin/remmina InstallationDate: Installed on 2013-05-07 (692 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: remmina UpgradeStatus: Upgraded to trusty on 2014-04-28 (337 days ago) ** Affects: remmina (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to remmina in Ubuntu. https://bugs.launchpad.net/bugs/1438801 Title: Remmina wont close using SSH tunnel when VNC server not running Status in remmina package in Ubuntu: New Bug description: If you use Remmina to attempt a VNC connection using the SSH tunnelling feature causes client to behave inconsistently or become unresponsive if the VNC server is not running (but SSH is). Sometimes clicking Cancel does nothing and the program must be killed. Sometimes clicking Cancel works but attempts to close the main Remmina window does nothing and program must be killed. Sometimes the applet icon stops appearing even after Remmina is re-started. Seems to be worse the longer you leave the system attempting to connect. If you cancel quickly (within about ten seconds) there are no problems. If run from the console nothing appears in their after the plugin ... registered messages. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: remmina 1.0.0-4ubuntu3 ProcVersionSignature: Ubuntu 3.13.0-48.80-generic 3.13.11-ckt16 Uname: Linux 3.13.0-48-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.8 Architecture: amd64 CurrentDesktop: Unity Date: Tue Mar 31 17:45:18 2015 EcryptfsInUse: Yes ExecutablePath: /usr/bin/remmina InstallationDate: Installed on 2013-05-07 (692 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: remmina UpgradeStatus: Upgraded to trusty on 2014-04-28 (337 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/remmina/+bug/1438801/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1419944] Re: all information / editing for n-m vanishes at latest update
Have just installed Setting up network-manager (0.9.10.0-4ubuntu6) ... Now to reboot. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1419944 Title: all information / editing for n-m vanishes at latest update Status in network-manager package in Ubuntu: Fix Released Bug description: I'm running 15.04 Lubuntu. The install and Live CD work fine, but when applying the latest updates there is simply a greyed out 'No network devices are available' (I'm typing this using WiFi on the machine it says has no network devices), or VPN Connections. Screen shot is at http://imgur.com/l9iQZ1A ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu5 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.16-0ubuntu1 Architecture: amd64 CurrentDesktop: LXDE Date: Mon Feb 9 19:17:01 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-02-06 (2 days ago) InstallationMedia: Lubuntu 15.04 Vivid Vervet - Alpha amd64 (20141113) IpRoute: default via 192.168.1.1 dev wlan0 proto static 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.2 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. NAME UUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH nmcli-dev: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1419944/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1419944] Re: all information / editing for n-m vanishes at latest update
0.9.10.0-4ubuntu6 fixes this issue. ** Changed in: network-manager (Ubuntu) Status: New = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1419944 Title: all information / editing for n-m vanishes at latest update Status in network-manager package in Ubuntu: Fix Released Bug description: I'm running 15.04 Lubuntu. The install and Live CD work fine, but when applying the latest updates there is simply a greyed out 'No network devices are available' (I'm typing this using WiFi on the machine it says has no network devices), or VPN Connections. Screen shot is at http://imgur.com/l9iQZ1A ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu5 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.16-0ubuntu1 Architecture: amd64 CurrentDesktop: LXDE Date: Mon Feb 9 19:17:01 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-02-06 (2 days ago) InstallationMedia: Lubuntu 15.04 Vivid Vervet - Alpha amd64 (20141113) IpRoute: default via 192.168.1.1 dev wlan0 proto static 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.2 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. NAME UUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH nmcli-dev: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1419944/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1419944] Re: all information / editing for n-m vanishes at latest update
Have just installed Setting up network-manager (0.9.10.0-4ubuntu6) ... Now to reboot. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1419944 Title: all information / editing for n-m vanishes at latest update Status in network-manager package in Ubuntu: New Bug description: I'm running 15.04 Lubuntu. The install and Live CD work fine, but when applying the latest updates there is simply a greyed out 'No network devices are available' (I'm typing this using WiFi on the machine it says has no network devices), or VPN Connections. Screen shot is at http://imgur.com/l9iQZ1A ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu5 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.16-0ubuntu1 Architecture: amd64 CurrentDesktop: LXDE Date: Mon Feb 9 19:17:01 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-02-06 (2 days ago) InstallationMedia: Lubuntu 15.04 Vivid Vervet - Alpha amd64 (20141113) IpRoute: default via 192.168.1.1 dev wlan0 proto static 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.2 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. NAME UUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH nmcli-dev: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1419944/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1419944] [NEW] all information / editing for n-m vanishes at latest update
Public bug reported: I'm running 15.04 Lubuntu. The install and Live CD work fine, but when applying the latest updates there is simply a greyed out 'No network devices are available' (I'm typing this using WiFi on the machine it says has no network devices), or VPN Connections. Screen shot is at http://imgur.com/l9iQZ1A ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu5 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.16-0ubuntu1 Architecture: amd64 CurrentDesktop: LXDE Date: Mon Feb 9 19:17:01 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-02-06 (2 days ago) InstallationMedia: Lubuntu 15.04 Vivid Vervet - Alpha amd64 (20141113) IpRoute: default via 192.168.1.1 dev wlan0 proto static 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.2 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. NAME UUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH nmcli-dev: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug vivid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1419944 Title: all information / editing for n-m vanishes at latest update Status in network-manager package in Ubuntu: New Bug description: I'm running 15.04 Lubuntu. The install and Live CD work fine, but when applying the latest updates there is simply a greyed out 'No network devices are available' (I'm typing this using WiFi on the machine it says has no network devices), or VPN Connections. Screen shot is at http://imgur.com/l9iQZ1A ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu5 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.16-0ubuntu1 Architecture: amd64 CurrentDesktop: LXDE Date: Mon Feb 9 19:17:01 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-02-06 (2 days ago) InstallationMedia: Lubuntu 15.04 Vivid Vervet - Alpha amd64 (20141113) IpRoute: default via 192.168.1.1 dev wlan0 proto static 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.2 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. NAME UUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH nmcli-dev: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1419944/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1418543] Re: Misleading start time reported in statistics
** Also affects: duplicity (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to duplicity in Ubuntu. https://bugs.launchpad.net/bugs/1418543 Title: Misleading start time reported in statistics Status in Duplicity - Bandwidth Efficient Encrypted Backup: New Status in duplicity package in Ubuntu: New Bug description: The statistics section reports a start and end time, however, the start time on my machine is always over 5 minutes after the actual start time. The section below shows a log file from a script that logs the current time, immediately runs duplicity and then logs the end time. During the 5+ minutes not included in the statistics the CPU usage by duplicity (as shown by `top`) is extremely high. -- Backup Started Thu Feb 5 09:00:01 UTC 2015 Import of duplicity.backends.giobackend Failed: No module named gio Local and Remote metadata are synchronized, no sync needed. Last full backup date: Thu Jan 29 16:00:04 2015 --[ Backup Statistics ]-- StartTime 1423127161.48 (Thu Feb 5 09:06:01 2015) EndTime 1423127165.40 (Thu Feb 5 09:06:05 2015) ElapsedTime 3.92 (3.92 seconds) SourceFiles 799 SourceFileSize 514518209 (491 MB) NewFiles 0 NewFileSize 0 (0 bytes) DeletedFiles 0 ChangedFiles 1 ChangedFileSize 1966187 (1.88 MB) ChangedDeltaSize 0 (0 bytes) DeltaEntries 1 RawDeltaSize 14530 (14.2 KB) TotalDestinationSizeChange 1467 (1.43 KB) Errors 9 - Backup Ended Thu Feb 5 09:06:06 UTC 2015 --- Package: duplicity Status: install ok installed Priority: optional Section: utils Installed-Size: 1028 Maintainer: Ubuntu Developers ubuntu-devel-disc...@lists.ubuntu.com Architecture: amd64 Version: 0.6.18-0ubuntu3.5 Depends: libc6 (= 2.4), librsync1 (= 0.9.6), python2.7, python (= 2.7.1-0ubuntu2), python ( 2.8), python-gnupginterface (= 0.3.2-9.1), python-lockfile Suggests: python-boto, ncftp, rsync, ssh, python-paramiko Breaks: deja-dup ( 22.0-0ubuntu5) Description: encrypted bandwidth-efficient backup Duplicity backs directories by producing encrypted tar-format volumes and uploading them to a remote or local file server. Because duplicity uses librsync, the incremental archives are space efficient and only record the parts of files that have changed since the last backup. Because duplicity uses GnuPG to encrypt and/or sign these archives, they will be safe from spying and/or modification by the server. Homepage: http://duplicity.nongnu.org/ Original-Maintainer: Alexander Zangerl a...@debian.org To manage notifications about this bug go to: https://bugs.launchpad.net/duplicity/+bug/1418543/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 835532] Re: lightdm does not keep numlock status on boot
** Tags added: trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/835532 Title: lightdm does not keep numlock status on boot Status in LightDM GTK+ Greeter: Triaged Status in “lightdm” package in Ubuntu: Triaged Status in “lightdm” source package in Oneiric: Won't Fix Bug description: when booting or logging out, the numlock status 'on' is not kept for password or pin input via numpad. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: lightdm 0.9.3-0ubuntu8 ProcVersionSignature: Ubuntu 3.0.0-9.14-generic 3.0.3 Uname: Linux 3.0.0-9-generic x86_64 Architecture: amd64 Date: Sat Aug 27 12:22:27 2011 InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release amd64 (20110427.1) SourcePackage: lightdm UpgradeStatus: Upgraded to oneiric on 2011-08-27 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/lightdm-gtk-greeter/+bug/835532/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1378423] Re: Virtualbox boots to black screen with daily
VirtualBox 4.3.18 r96516 running on Lubuntu Utopic can install and run Lubuntu Desktop amd64 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1378423 Title: Virtualbox boots to black screen with daily Status in “xorg” package in Ubuntu: Confirmed Bug description: Boot the daily image. Get a black screen. Go to tty1 - lightdm has started - running sudo service lightdm status echoes start/waiting Return to tty7 and the login dialogue has now appeared ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: xorg 1:7.7+7ubuntu2 ProcVersionSignature: Ubuntu 3.16.0-20.27-generic 3.16.3 Uname: Linux 3.16.0-20-generic x86_64 ApportVersion: 2.14.7-0ubuntu3 Architecture: amd64 CasperVersion: 1.344 Date: Tue Oct 7 15:53:54 2014 LiveMediaBuild: Xubuntu 14.10 Utopic Unicorn - Alpha amd64 (20141006) ProcEnviron: SHELL=/bin/bash TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 XDG_RUNTIME_DIR=set SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1378423/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1354693] [NEW] Gnome DIsks crashes powering off drive
Public bug reported: I have two IDE drives that I'm accessing through a USB caddy that I've wiped and zeroed using shred, and re-formatted to NTFS, after which I rebooted my PC. If I insert the USB cable the drive mounts and appears in DIsks as normal. If I hit choose the Power Off option then Disks crashes with a Segmentation fault. Restarting Disks shows two instances of the affected drive, one saying No Media in the partition image and the other containin the correct partitions. Note that the no media one does not show a location (such as /dev/sdb). Restarting the computer is the only way to clear the problem up. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: gnome-disk-utility 3.10.0-1ubuntu3 ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 CurrentDesktop: Unity Date: Sat Aug 9 14:28:42 2014 EcryptfsInUse: Yes ExecutablePath: /usr/bin/gnome-disks InstallationDate: Installed on 2013-05-03 (462 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: gnome-disk-utility UpgradeStatus: Upgraded to trusty on 2014-05-21 (79 days ago) ** Affects: gnome-disk-utility (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-disk-utility in Ubuntu. https://bugs.launchpad.net/bugs/1354693 Title: Gnome DIsks crashes powering off drive Status in “gnome-disk-utility” package in Ubuntu: New Bug description: I have two IDE drives that I'm accessing through a USB caddy that I've wiped and zeroed using shred, and re-formatted to NTFS, after which I rebooted my PC. If I insert the USB cable the drive mounts and appears in DIsks as normal. If I hit choose the Power Off option then Disks crashes with a Segmentation fault. Restarting Disks shows two instances of the affected drive, one saying No Media in the partition image and the other containin the correct partitions. Note that the no media one does not show a location (such as /dev/sdb). Restarting the computer is the only way to clear the problem up. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: gnome-disk-utility 3.10.0-1ubuntu3 ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 CurrentDesktop: Unity Date: Sat Aug 9 14:28:42 2014 EcryptfsInUse: Yes ExecutablePath: /usr/bin/gnome-disks InstallationDate: Installed on 2013-05-03 (462 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: gnome-disk-utility UpgradeStatus: Upgraded to trusty on 2014-05-21 (79 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-disk-utility/+bug/1354693/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1307648] Re: chromium 34 from proposed does not take input from keyboard in first entry point on several webpages
Keeping iBus and using Version 35.0.1916.153 Ubuntu 14.10 (274914) also seems okay. I suggest an SRU be created -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1307648 Title: chromium 34 from proposed does not take input from keyboard in first entry point on several webpages Status in “chromium-browser” package in Ubuntu: Confirmed Bug description: To reproduce install chromium 34 from proposed with pepperflash. And find a site that you input some text into like indeed.com or some others. Then you hit the keys on the keyboard but no text is seen onscreen. I expected the text to be entering into chroumium like it is on any other browser. And for the text to be entered into the browser and transfered ot the webpage I am submitting it to. Instead it did not show up and indeed.com thought I did not enter anything even though I pressed several keys on my keyboard. Description: Ubuntu 14.04 LTS Release: 14.04 chromium-browser: Installed: 34.0.1847.116-0ubuntu1~pkg1006 Candidate: 34.0.1847.116-0ubuntu1~pkg1006 Version table: *** 34.0.1847.116-0ubuntu1~pkg1006 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty-proposed/universe amd64 Packages 100 /var/lib/dpkg/status 33.0.1750.152-0ubuntu1~pkg995.1 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/universe amd64 Packages ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: chromium-browser 34.0.1847.116-0ubuntu1~pkg1006 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.14.1-0ubuntu2 Architecture: amd64 CurrentDesktop: LXDE Date: Mon Apr 14 11:15:07 2014 Desktop-Session: DESKTOP_SESSION = Lubuntu XDG_CONFIG_DIRS = /etc/xdg/lubuntu:/etc/xdg/xdg-Lubuntu:/usr/share/upstart/xdg:/etc/xdg XDG_DATA_DIRS = /etc/xdg/lubuntu:/usr/local/share:/usr/share:/usr/share/gdm:/var/lib/menu-xdg:/usr/share/Lubuntu:/usr/local/share/:/usr/share/ DetectedPlugins: DiskUsage: b'Filesystem Type Size Used Avail Use% Mounted on\n/dev/sdc4 ext4 641G 61G 549G 10% /\nnone tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup\nudev devtmpfs 1.9G 4.0K 1.9G 1% /dev\ntmpfs tmpfs 386M 1.3M 385M 1% /run\nnone tmpfs 5.0M 0 5.0M 0% /run/lock\nnone tmpfs 1.9G 17M 1.9G 1% /run/shm\nnone tmpfs 100M 16K 100M 1% /run/user\n' Inodes: b'Filesystem Inodes IUsed IFree IUse% Mounted on\n/dev/sdc4 41M 565K 41M2% /\nnone 483K 2 483K1% /sys/fs/cgroup\nudev 480K 612 479K1% /dev\ntmpfs 483K 643 482K1% /run\nnone 483K 5 483K1% /run/lock\nnone 483K19 483K1% /run/shm\nnone 483K13 483K1% /run/user\n' Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None InstallationDate: Installed on 2014-01-02 (102 days ago) InstallationMedia: Lubuntu 14.04 Trusty Tahr - Alpha amd64 (20140101) SourcePackage: chromium-browser UpgradeStatus: No upgrade log present (probably fresh install) gconf-keys: /desktop/gnome/applications/browser/exec = b'firefox\n'/desktop/gnome/url-handlers/https/command = b'sensible-browser %s\n'/desktop/gnome/url-handlers/https/enabled = b'true\n'/desktop/gnome/url-handlers/http/command = b'sensible-browser %s\n'/desktop/gnome/url-handlers/http/enabled = b'true\n'/desktop/gnome/session/required_components/windowmanager = b''/apps/metacity/general/compositing_manager = b''/desktop/gnome/interface/icon_theme = b'gnome\n'/desktop/gnome/interface/gtk_theme = b'Clearlooks\n' modified.conffile..etc.default.chromium.browser: [deleted] mtime.conffile..etc.chromium.browser.default: 2014-04-14T10:56:12.681598 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1307648/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1341279] [NEW] Num Lock turned off when log-in page shown
Public bug reported: Whenever the log-in page shows, num lock is turned off. It's OK when unlocking, the state is preserved, it's just on start-up or after a log-out. To reproduce either turn on Num Lock then log-out, or set Num Lock on in the BIOS (as I do) and start the machine. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: lightdm 1.10.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-32.56-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CurrentDesktop: Unity Date: Sun Jul 13 13:25:19 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2013-05-07 (431 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: lightdm UpgradeStatus: Upgraded to trusty on 2014-04-28 (76 days ago) ** Affects: lightdm (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1341279 Title: Num Lock turned off when log-in page shown Status in “lightdm” package in Ubuntu: New Bug description: Whenever the log-in page shows, num lock is turned off. It's OK when unlocking, the state is preserved, it's just on start-up or after a log-out. To reproduce either turn on Num Lock then log-out, or set Num Lock on in the BIOS (as I do) and start the machine. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: lightdm 1.10.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-32.56-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CurrentDesktop: Unity Date: Sun Jul 13 13:25:19 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2013-05-07 (431 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: lightdm UpgradeStatus: Upgraded to trusty on 2014-04-28 (76 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1341279/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1335605] [NEW] Click location displaced upwards by about 1cm
Public bug reported: When backups start, and Place Windows in compiz is set to Maximise, clicking controls on the backup window doesn't work. However, if you click about 1cm above them (e.g. the details arrow, or buttons, or option buttons if running first time) then they work. It gives the appearance that the window is not responding until you notice accidentally click one control and the one below flinches. Restoring to normal then maximising the window solves the problem. Also, after running ubuntu-bug and returning to the window the problem goes away. However, this has happened reliably many times and I have not had this particular problem in any other application. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: deja-dup 30.0-0ubuntu4 ProcVersionSignature: Ubuntu 3.13.0-30.54-generic 3.13.11.2 Uname: Linux 3.13.0-30-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CurrentDesktop: Unity Date: Sun Jun 29 12:17:30 2014 EcryptfsInUse: Yes ExecutablePath: /usr/bin/deja-dup InstallationDate: Installed on 2013-05-07 (417 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: deja-dup UpgradeStatus: Upgraded to trusty on 2014-04-28 (61 days ago) ** Affects: deja-dup (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to deja-dup in Ubuntu. https://bugs.launchpad.net/bugs/1335605 Title: Click location displaced upwards by about 1cm Status in “deja-dup” package in Ubuntu: New Bug description: When backups start, and Place Windows in compiz is set to Maximise, clicking controls on the backup window doesn't work. However, if you click about 1cm above them (e.g. the details arrow, or buttons, or option buttons if running first time) then they work. It gives the appearance that the window is not responding until you notice accidentally click one control and the one below flinches. Restoring to normal then maximising the window solves the problem. Also, after running ubuntu-bug and returning to the window the problem goes away. However, this has happened reliably many times and I have not had this particular problem in any other application. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: deja-dup 30.0-0ubuntu4 ProcVersionSignature: Ubuntu 3.13.0-30.54-generic 3.13.11.2 Uname: Linux 3.13.0-30-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CurrentDesktop: Unity Date: Sun Jun 29 12:17:30 2014 EcryptfsInUse: Yes ExecutablePath: /usr/bin/deja-dup InstallationDate: Installed on 2013-05-07 (417 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: deja-dup UpgradeStatus: Upgraded to trusty on 2014-04-28 (61 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/deja-dup/+bug/1335605/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1335125] [NEW] Wrong number of ticks by application icon in launcher
Public bug reported: Since upgrade to 14.04 I've noticed that the number of ticks/markers that indicates the number of windows a the side of an application's icon is often incorrect. This seems to apply to Gnome Terminal, Firefox and Thunderbird and more. Reproduction #1: Open a terminal. Right click the launcher icon and choose New terminal. Observe there's only one ticks. Left click the launcher icon to expose both terminals. Observe the number of ticks is corrected. Choose either, it doesn't matter. Close one of the terminals. Observe there's still two ticks. The number of ticks doesn't seem to refresh until something happens in the launcher - either you click on something in the launcher, but the ticks seems to correct themselves at other times that I can't quite put my finger on. This is extremely distracting and interrupts work all the time checking to see what's left open to find that there's nothing there. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: compiz-core 1:0.9.11+14.04.20140423-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-30.54-generic 3.13.11.2 Uname: Linux 3.13.0-30-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Fri Jun 27 14:26:07 2014 DistUpgraded: 2014-04-28 12:24:37,637 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: ubuntu EcryptfsInUse: Yes ExecutablePath: /usr/bin/compiz GraphicsCard: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:1033] InstallationDate: Installed on 2013-05-07 (415 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) Lsusb: Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Micro-Star International Calpella platform ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-30-generic root=UUID=1aab217a-e362-4aab-9283-0b04525b2bdf ro quiet splash vt.handoff=7 SourcePackage: compiz UpgradeStatus: Upgraded to trusty on 2014-04-28 (60 days ago) dmi.bios.date: 07/21/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: E1681IG6 VER.109 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: To be filled by O.E.M. dmi.board.vendor: Micro-Star International dmi.board.version: Ver.001 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: Micro-Star International dmi.chassis.version: Ver.001 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrE1681IG6VER.109:bd07/21/2010:svnMicro-StarInternational:pnCalpellaplatform:pvrVer.001:rvnMicro-StarInternational:rnTobefilledbyO.E.M.:rvrVer.001:cvnMicro-StarInternational:ct9:cvrVer.001: dmi.product.name: Calpella platform dmi.product.version: Ver.001 dmi.sys.vendor: Micro-Star International version.compiz: compiz 1:0.9.11+14.04.20140423-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.1 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Thu Jun 26 09:47:01 2014 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputVideo BusKEYBOARD, id 7 inputAT Translated Set 2 keyboard KEYBOARD, id 8 inputSynPS/2 Synaptics TouchPad TOUCHPAD, id 9 inputMSI WMI hotkeys KEYBOARD, id 10 xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 16705 vendor SEC xserver.version: 2:1.15.1-0ubuntu2 ** Affects: compiz (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 trusty ubuntu -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to compiz in Ubuntu. https://bugs.launchpad.net/bugs/1335125 Title: Wrong number of ticks by application icon in launcher Status
[Desktop-packages] [Bug 1303462] Re: [Regression] Window titlebars placed behind panel
That's fixed it, thanks. I just upgraded with proposed updates enabled, and can confirm that the problem has gone away. It required a restart (maybe log-out/in would have done it). -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to compiz in Ubuntu. https://bugs.launchpad.net/bugs/1303462 Title: [Regression] Window titlebars placed behind panel Status in Compiz: Fix Committed Status in Compiz 0.9.11 series: In Progress Status in Unity: Invalid Status in “compiz” package in Ubuntu: Fix Released Status in “compiz” source package in Trusty: Fix Committed Bug description: [Impact] Some windows that open from within another window such as a Firefox popup window will be placed with the decorations under the Panel. Also, some windows will just open with the decoration under the Panel such as virt-manager. This can cause confusion for the user on how to move the window and how to close it. This can be very disruptive to a user's workflow. [Test case] 1. Install virt-manager. 2. Make sure no other windows are open. 3. Start virt-manager. virt-manager should start in the top left. With this fix, the decoration should be visible. [Regression potential] None identified. * Debdiff is found at https://launchpadlibrarian.net/178439518/compiz- trusty-sru-2.debdiff * Original description: Windows with a height of (Display Height - Panel Height) get placed at y=0 (behind the top panel) which means window titlebars are not reachable without alt-moving the window. I assume this happens with windows that want to resize themselves if their height exceeds the display resolution. Reproducable on my 1366x768 screen with LibreOffice and a Qt 5 desktop application I'm working on. TEMPORARY WORKAROUND: Use the Cntrl+SuperKey+Right or Left Arrow Key This will resize your currently focused window to occupy the Right (Left) half of the screen. The Title Bar should now be visible, so you need to drag it and resize it at your prefered position. This will save the new position in place of the previously hidden state. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: unity 7.2.0+14.04.20140403-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8 Uname: Linux 3.13.0-23-generic x86_64 ApportVersion: 2.14.1-0ubuntu1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CurrentDesktop: Unity Date: Sun Apr 6 21:45:41 2014 InstallationDate: Installed on 2014-04-04 (2 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Daily amd64 (20140404) SourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/compiz/+bug/1303462/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1062651] Re: Rhythmbox unable to transfer tracks when ripping to ogg
I have this problem on 13.10 after upgrading from 13.04 (which was working perfectly). ** Changed in: rhythmbox (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to rhythmbox in Ubuntu. https://bugs.launchpad.net/bugs/1062651 Title: Rhythmbox unable to transfer tracks when ripping to ogg Status in “rhythmbox” package in Ubuntu: Confirmed Bug description: I get the attached error message while trying to import an Audio CD into the ogg format using Rhythmbox. I am able to import the same Audio CD into the ogg format using Banshee. I am able to play the ogg music files that Banshee produces. I have attempted to click Install instead of Cancel the Transfer, but that did not solve this problem. I am assuming this is not a gstreamer/library issue since Rhythmbox can play ogg files and Banshee can rip to ogg. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/1062651/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1062651] Re: Rhythmbox unable to transfer tracks when ripping to ogg
Sorry - 14.04 after upgrading from 13.10 (I'm losing track). -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to rhythmbox in Ubuntu. https://bugs.launchpad.net/bugs/1062651 Title: Rhythmbox unable to transfer tracks when ripping to ogg Status in “rhythmbox” package in Ubuntu: Confirmed Bug description: I get the attached error message while trying to import an Audio CD into the ogg format using Rhythmbox. I am able to import the same Audio CD into the ogg format using Banshee. I am able to play the ogg music files that Banshee produces. I have attempted to click Install instead of Cancel the Transfer, but that did not solve this problem. I am assuming this is not a gstreamer/library issue since Rhythmbox can play ogg files and Banshee can rip to ogg. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/1062651/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1324676] [NEW] Support for TRANSMISSION_WEB_HOME variable
Public bug reported: Ubuntu 14.04 LTS transmission-daemon 2.82-1.1ubuntu3 The init.d and upstart scripts do not support exporting the TRANSMISSION_WEB_HOME variable for specifing an alternate location for the web interface files: https://trac.transmissionbt.com/wiki/EnvironmentVariables This is important if you want to use a different web interface (esspecially if you use a touch device that doesn't support right click events) and contrary to the default init script: https://forum.transmissionbt.com/viewforum.php?f=8 https://trac.transmissionbt.com/wiki/Scripts/initd Please consider fixing this in a future update. ** Affects: transmission (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to transmission in Ubuntu. https://bugs.launchpad.net/bugs/1324676 Title: Support for TRANSMISSION_WEB_HOME variable Status in “transmission” package in Ubuntu: New Bug description: Ubuntu 14.04 LTS transmission-daemon 2.82-1.1ubuntu3 The init.d and upstart scripts do not support exporting the TRANSMISSION_WEB_HOME variable for specifing an alternate location for the web interface files: https://trac.transmissionbt.com/wiki/EnvironmentVariables This is important if you want to use a different web interface (esspecially if you use a touch device that doesn't support right click events) and contrary to the default init script: https://forum.transmissionbt.com/viewforum.php?f=8 https://trac.transmissionbt.com/wiki/Scripts/initd Please consider fixing this in a future update. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/transmission/+bug/1324676/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
Re: [Desktop-packages] [Bug 1080674] Re: [QEMU] Corrupted desktop screen for raring desktop installation in QEMU guest (Cirrus graphics). Affects KVM but not VBox.
Go drum up some support and nag https://launchpad.net/~mlankhorst to actually fix it. He knows the fix, just will not commit time to it. Get it passed around the heat built up (that is get people to mark it as 'affects me') Regards, Phill. On 23 May 2014 20:27, Kevin Masaryk 1080...@bugs.launchpad.net wrote: I don't understand why mlankhorst marked this won't fix when it's still clearly an outstanding issue. Because qxl is also broken (and I always has been in Ubuntu in my experience) this doesn't leave many/any? options for running an Ubuntu virt under KVM. -- You received this bug notification because you are subscribed to a duplicate bug report (1088692). https://bugs.launchpad.net/bugs/1080674 Title: [QEMU] Corrupted desktop screen for raring desktop installation in QEMU guest (Cirrus graphics). Affects KVM but not VBox. Status in Cairo Graphics Library: Confirmed Status in cairo package in Ubuntu: Confirmed Status in linux package in Ubuntu: Invalid Status in xserver-xorg-video-cirrus package in Ubuntu: Won't Fix Bug description: The desktop screen appears corrupted after raring desktop installation. Please see attached screenshot for how it looks. Going through System settings - Appearance and selecting different wall papers does not solve the isssue. Test Steps: 1. Install Ubuntu 13.04 Raring Ringtail - Alpha i386 (20121119) 2. Reboot after the installation and log in ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: unity 6.12.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.7.0-2.8-generic 3.7.0-rc5 Uname: Linux 3.7.0-2-generic i686 .tmp.unity.support.test.1: ApportVersion: 2.6.2-0ubuntu3 Architecture: i386 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CurrentDmesg: [ 18.945219] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. Date: Mon Nov 19 12:26:26 2012 DistUpgraded: Fresh install DistroCodename: raring DistroVariant: ubuntu GraphicsCard: Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller]) Subsystem: Red Hat, Inc Device [1af4:1100] InstallationDate: Installed on 2012-11-19 (0 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha i386 (20121119) Lsusb: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: Bochs Bochs MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.7.0-2-generic root=UUID=131c13a4-8227-4946-8a1f-2aaa6043670d ro quiet splash vt.handoff=7 SourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/01/2007 dmi.bios.vendor: Bochs dmi.bios.version: Bochs dmi.chassis.type: 1 dmi.chassis.vendor: Bochs dmi.modalias: dmi:bvnBochs:bvrBochs:bd01/01/2007:svnBochs:pnBochs:pvr:cvnBochs:ct1:cvr: dmi.product.name: Bochs dmi.sys.vendor: Bochs version.compiz: compiz 1:0.9.8.4+bzr3412-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.0.0-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.4-0ubuntu1 xserver.bootTime: Mon Nov 19 12:23:11 2012 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputAT Translated Set 2 keyboard KEYBOARD, id 7 inputImExPS/2 Generic Explorer Mouse MOUSE, id 8 xserver.errors: open /dev/dri/card0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.13.0-0ubuntu7 To manage notifications about this bug go to: https://bugs.launchpad.net/cairo/+bug/1080674/+subscriptions -- https://wiki.ubuntu.com/phillw -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cairo in Ubuntu. https://bugs.launchpad.net/bugs/1080674 Title: [QEMU] Corrupted desktop screen for raring desktop installation in QEMU guest (Cirrus graphics). Affects KVM but not VBox. Status in Cairo Graphics Library: Confirmed Status in “cairo” package in Ubuntu: Confirmed Status in “linux” package in Ubuntu: Invalid Status in “xserver-xorg-video-cirrus” package in Ubuntu: Won't Fix Bug description: The desktop screen appears corrupted after raring desktop installation. Please see attached screenshot for how it looks. Going through System settings - Appearance and selecting different wall papers does
Re: [Desktop-packages] [Bug 1307648] Re: chromium 34 from proposed does not take input from keyboard in first entry point on several webpages
Version 35.0.1916.114 Ubuntu 14.04 (270117) works fine, I have asked as to when it will land In the meantime you can enable a temporary ppa with it on (you want the Beta PPA). http://www.webupd8.org/2014/02/how-to-install-chromium-beta-or-dev.html Regards, Phill. On 22 May 2014 18:33, NoOp 1307...@bugs.launchpad.net wrote: The problem is not just in the proposed version, it is in the final release version as well: $ apt-cache policy chromium-browser chromium-browser: Installed: 34.0.1847.116-0ubuntu2 Candidate: 34.0.1847.116-0ubuntu2 Version table: *** 34.0.1847.116-0ubuntu2 0 500 http://archive.ubuntu.com/ubuntu/ trusty/universe i386 Packages 100 /var/lib/dpkg/status $ echo $GDMSESSION gnome-fallback $ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=14.04 DISTRIB_CODENAME=trusty DISTRIB_DESCRIPTION=Ubuntu 14.04 LTS -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1307648 Title: chromium 34 from proposed does not take input from keyboard in first entry point on several webpages Status in chromium-browser package in Ubuntu: Confirmed Bug description: To reproduce install chromium 34 from proposed with pepperflash. And find a site that you input some text into like indeed.com or some others. Then you hit the keys on the keyboard but no text is seen onscreen. I expected the text to be entering into chroumium like it is on any other browser. And for the text to be entered into the browser and transfered ot the webpage I am submitting it to. Instead it did not show up and indeed.com thought I did not enter anything even though I pressed several keys on my keyboard. Description: Ubuntu 14.04 LTS Release: 14.04 chromium-browser: Installed: 34.0.1847.116-0ubuntu1~pkg1006 Candidate: 34.0.1847.116-0ubuntu1~pkg1006 Version table: *** 34.0.1847.116-0ubuntu1~pkg1006 0 500 http://us.archive.ubuntu.com/ubuntu/trusty-proposed/universe amd64 Packages 100 /var/lib/dpkg/status 33.0.1750.152-0ubuntu1~pkg995.1 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/universe amd64 Packages ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: chromium-browser 34.0.1847.116-0ubuntu1~pkg1006 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.14.1-0ubuntu2 Architecture: amd64 CurrentDesktop: LXDE Date: Mon Apr 14 11:15:07 2014 Desktop-Session: DESKTOP_SESSION = Lubuntu XDG_CONFIG_DIRS = /etc/xdg/lubuntu:/etc/xdg/xdg-Lubuntu:/usr/share/upstart/xdg:/etc/xdg XDG_DATA_DIRS = /etc/xdg/lubuntu:/usr/local/share:/usr/share:/usr/share/gdm:/var/lib/menu-xdg:/usr/share/Lubuntu:/usr/local/share/:/usr/share/ DetectedPlugins: DiskUsage: b'Filesystem Type Size Used Avail Use% Mounted on\n/dev/sdc4 ext4 641G 61G 549G 10% /\nnone tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup\nudev devtmpfs 1.9G 4.0K 1.9G 1% /dev\ntmpfs tmpfs 386M 1.3M 385M 1% /run\nnone tmpfs 5.0M 0 5.0M 0% /run/lock\nnone tmpfs 1.9G 17M 1.9G 1% /run/shm\nnone tmpfs 100M 16K 100M 1% /run/user\n' Inodes: b'Filesystem Inodes IUsed IFree IUse% Mounted on\n/dev/sdc4 41M 565K 41M2% /\nnone 483K 2 483K1% /sys/fs/cgroup\nudev 480K 612 479K1% /dev\ntmpfs 483K 643 482K1% /run\nnone 483K 5 483K1% /run/lock\nnone 483K19 483K1% /run/shm\nnone 483K13 483K1% /run/user\n' Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None InstallationDate: Installed on 2014-01-02 (102 days ago) InstallationMedia: Lubuntu 14.04 Trusty Tahr - Alpha amd64 (20140101) SourcePackage: chromium-browser UpgradeStatus: No upgrade log present (probably fresh install) gconf-keys: /desktop/gnome/applications/browser/exec = b'firefox\n'/desktop/gnome/url-handlers/https/command = b'sensible-browser %s\n'/desktop/gnome/url-handlers/https/enabled = b'true\n'/desktop/gnome/url-handlers/http/command = b'sensible-browser %s\n'/desktop/gnome/url-handlers/http/enabled = b'true\n'/desktop/gnome/session/required_components/windowmanager = b''/apps/metacity/general/compositing_manager = b''/desktop/gnome/interface/icon_theme = b'gnome\n'/desktop/gnome/interface/gtk_theme = b'Clearlooks\n' modified.conffile..etc.default.chromium.browser: [deleted] mtime.conffile..etc.chromium.browser.default: 2014-04-14T10:56:12.681598 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1307648/+subscriptions -- https://wiki.ubuntu.com/phillw -- You received this bug notification because you are a member of Desktop
[Desktop-packages] [Bug 1318199] [NEW] Can't change password
Public bug reported: When attempting to change my password since update to 14.04, the Change button is disabled. The UI claims my password is Not good enough, probably because it's not complex according to it's rules. Choosing a different password with difference characters seems to work cause this to change and the button enables. While it's perfectly reasonable and useful to for the OS to provide feedback on its opinion of password quality, it is my view that it's not appropriate for the a personal computer to over-rule the decisions of its user with respect to password choices. For this reason, and that it's a change in behaviour since the previous version, I think this should be treated as a bug. It's possible to change the password with passwd. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: unity-control-center 14.04.3+14.04.20140410-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity Date: Sat May 10 16:32:51 2014 EcryptfsInUse: Yes ExecutablePath: /usr/bin/unity-control-center InstallationDate: Installed on 2013-05-07 (367 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: unity-control-center UpgradeStatus: Upgraded to trusty on 2014-04-28 (12 days ago) usr_lib_unity-control-center: activity-log-manager 0.9.7-0ubuntu14 deja-dup 30.0-0ubuntu4 gnome-control-center 1:3.6.3-0ubuntu56.1 ** Affects: unity-control-center (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty ** Description changed: When attempting to change my password since update to 14.04, the Change button is disabled. The UI claims my password is Not good enough, probably because it's not complex according to it's rules. Choosing a different password with difference characters seems to work cause this to change and the button enables. While it's perfectly reasonable and useful to for the OS to provide feedback on its opinion of password quality, it is my view that it's not appropriate for the a personal computer to over-rule the decisions of its user with respect to password choices. For this reason, and that - it's a chance in behaviour since the previous version, I think this + it's a change in behaviour since the previous version, I think this should be treated as a bug. It's possible to change the password with passwd. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: unity-control-center 14.04.3+14.04.20140410-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity Date: Sat May 10 16:32:51 2014 EcryptfsInUse: Yes ExecutablePath: /usr/bin/unity-control-center InstallationDate: Installed on 2013-05-07 (367 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) ProcEnviron: - LANGUAGE=en_GB:en - PATH=(custom, no user) - XDG_RUNTIME_DIR=set - LANG=en_GB.UTF-8 - SHELL=/bin/bash + LANGUAGE=en_GB:en + PATH=(custom, no user) + XDG_RUNTIME_DIR=set + LANG=en_GB.UTF-8 + SHELL=/bin/bash SourcePackage: unity-control-center UpgradeStatus: Upgraded to trusty on 2014-04-28 (12 days ago) usr_lib_unity-control-center: - activity-log-manager 0.9.7-0ubuntu14 - deja-dup 30.0-0ubuntu4 - gnome-control-center 1:3.6.3-0ubuntu56.1 + activity-log-manager 0.9.7-0ubuntu14 + deja-dup 30.0-0ubuntu4 + gnome-control-center 1:3.6.3-0ubuntu56.1 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1318199 Title: Can't change password Status in “unity-control-center” package in Ubuntu: New Bug description: When attempting to change my password since update to 14.04, the Change button is disabled. The UI claims my password is Not good enough, probably because it's not complex according to it's rules. Choosing a different password with difference characters seems to work cause this to change and the button enables. While it's perfectly reasonable and useful to for the OS to provide feedback on its opinion of password quality, it is my view that it's not appropriate for the a personal computer to over-rule the decisions of its user with respect to password choices. For this reason, and that it's a change in behaviour since the previous version, I think this should be treated as a bug. It's possible to change the password with passwd. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: unity-control-center 14.04.3+14.04.20140410-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9
Re: [Desktop-packages] [Bug 1278062] Re: firefox crashes on startup (but apparently layunched properly to enable me to post this)
Please read back and install the newer lxsession :) Regards, Phill. On 25 April 2014 07:39, Stego stego...@web.de wrote: On Ubuntu trusty with Unity i notice that nearly every time i start firefox, it crashes. when i submit the crash report and restart it, it works again. what can we do to simplify the bugfixing process? -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1278062 Title: firefox crashes on startup (but apparently layunched properly to enable me to post this) Status in firefox package in Ubuntu: Confirmed Status in lxsession package in Ubuntu: Fix Released Bug description: I tried launching from a terminal window after the first crash and got this: ~$ firefox (process:2974): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed Segmentation fault (core dumped) ~$ ~$ lsb_release -rd Description: Ubuntu Trusty Tahr (development branch) Release: 14.04 ~$ apt-cache policy firefox firefox: Installed: 25.0+build3-0ubuntu0.13.10.1 Candidate: 25.0+build3-0ubuntu0.13.10.1 Version table: *** 25.0+build3-0ubuntu0.13.10.1 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status ~$ ProblemType: Crash DistroRelease: Ubuntu 14.04 Package: firefox 25.0+build3-0ubuntu0.13.10.1 ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: a 1919 F pulseaudio BuildID: 20131028112446 CRDA: Error: [Errno 2] No such file or directory: 'iw' Channel: Unavailable CrashCounter: 1 CurrentDesktop: LXDE Date: Sun Feb 9 05:43:26 2014 ExecutablePath: /usr/lib/firefox/firefox ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2013-11-22 (78 days ago) InstallationMedia: Lubuntu 14.04 Trusty Tahr - Alpha amd64 (20131102) IpRoute: default via 192.168.0.1 dev wlan0 proto static 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.101 metric 9 MostRecentCrashID: bp-3359569a-fc3a-40e2-978d-e68d72120711 PrefSources: prefs.js [Profile]/extensions/{3d7eb24f-2740-49df-8937-200b1cc08f8a}/defaults/preferences/flashblock.js [Profile]/extensions/{0545b830-f0aa-4d7e-8820-50a4629a56fe}/defaults/preferences/defaults.js ProcCmdline: /usr/lib/firefox/firefox Profiles: Profile0 (Default) - LastVersion=25.0/20131028112446 RelatedPackageVersions: gecko-mediaplayer 1.0.8-4ubuntu1 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no RunningIncompatibleAddons: False SegvAnalysis: Skipped: missing required field Disassembly Signal: 11 SourcePackage: firefox SubmittedCrashIDs: bp-3359569a-fc3a-40e2-978d-e68d72120711 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 02/17/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 5.12 dmi.board.name: NutMeg dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.02 dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr5.12:bd02/17/2009:svnHP-Pavilion:pnFQ578AAR-ABAs3707c:pvr:rvnPEGATRONCORPORATION:rnNutMeg:rvr1.02:cvnHewlett-Packard:ct3:cvrChassisVersion: dmi.product.name: FQ578AAR-ABA s3707c dmi.sys.vendor: HP-Pavilion To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1278062/+subscriptions -- https://wiki.ubuntu.com/phillw -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1278062 Title: firefox crashes on startup (but apparently layunched properly to enable me to post this) Status in “firefox” package in Ubuntu: Confirmed Status in “lxsession” package in Ubuntu: Fix Released Bug description: I tried launching from a terminal window after the first crash and got this: ~$ firefox (process:2974): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed Segmentation fault (core dumped) ~$ ~$ lsb_release -rd Description: Ubuntu Trusty Tahr (development branch) Release: 14.04 ~$ apt-cache policy firefox firefox: Installed: 25.0+build3-0ubuntu0.13.10.1 Candidate: 25.0+build3-0ubuntu0.13.10.1 Version table: *** 25.0+build3
Re: [Desktop-packages] [Bug 1080674] Re: [QEMU] Corrupted desktop screen for raring desktop installation in QEMU guest (Cirrus graphics). Affects KVM but not VBox.
Don't go complaining to me.. they marked it as won't fix... all I do is tell people the workaroud it was, and still an WTF moment that they will refuse to even look at the issue --- but there you go... a couple of extra steps... choose 'extra' switch the video mode to SVGA. click on 'OK (or what ever it is) and then click on start installation (top left) Regards, Phill. On 22 April 2014 07:25, hamish 1080...@bugs.launchpad.net wrote: For an xubuntu 14.04 VM, '-vga vmware' and '-vga qxl' work (yay), but '-vga std' and '-vga cirrus' are still corrupted. (host qemu-kvm is running in debian/wheezy, version 1.1.2+dfsg-6+deb7u1) Hamish -- You received this bug notification because you are subscribed to a duplicate bug report (1088692). https://bugs.launchpad.net/bugs/1080674 Title: [QEMU] Corrupted desktop screen for raring desktop installation in QEMU guest (Cirrus graphics). Affects KVM but not VBox. Status in Cairo Graphics Library: Confirmed Status in cairo package in Ubuntu: Confirmed Status in linux package in Ubuntu: Invalid Status in xserver-xorg-video-cirrus package in Ubuntu: Won't Fix Bug description: The desktop screen appears corrupted after raring desktop installation. Please see attached screenshot for how it looks. Going through System settings - Appearance and selecting different wall papers does not solve the isssue. Test Steps: 1. Install Ubuntu 13.04 Raring Ringtail - Alpha i386 (20121119) 2. Reboot after the installation and log in ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: unity 6.12.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.7.0-2.8-generic 3.7.0-rc5 Uname: Linux 3.7.0-2-generic i686 .tmp.unity.support.test.1: ApportVersion: 2.6.2-0ubuntu3 Architecture: i386 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CurrentDmesg: [ 18.945219] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. Date: Mon Nov 19 12:26:26 2012 DistUpgraded: Fresh install DistroCodename: raring DistroVariant: ubuntu GraphicsCard: Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller]) Subsystem: Red Hat, Inc Device [1af4:1100] InstallationDate: Installed on 2012-11-19 (0 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha i386 (20121119) Lsusb: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: Bochs Bochs MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.7.0-2-generic root=UUID=131c13a4-8227-4946-8a1f-2aaa6043670d ro quiet splash vt.handoff=7 SourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/01/2007 dmi.bios.vendor: Bochs dmi.bios.version: Bochs dmi.chassis.type: 1 dmi.chassis.vendor: Bochs dmi.modalias: dmi:bvnBochs:bvrBochs:bd01/01/2007:svnBochs:pnBochs:pvr:cvnBochs:ct1:cvr: dmi.product.name: Bochs dmi.sys.vendor: Bochs version.compiz: compiz 1:0.9.8.4+bzr3412-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.0.0-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.4-0ubuntu1 xserver.bootTime: Mon Nov 19 12:23:11 2012 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputAT Translated Set 2 keyboard KEYBOARD, id 7 inputImExPS/2 Generic Explorer Mouse MOUSE, id 8 xserver.errors: open /dev/dri/card0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.13.0-0ubuntu7 To manage notifications about this bug go to: https://bugs.launchpad.net/cairo/+bug/1080674/+subscriptions -- https://wiki.ubuntu.com/phillw -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cairo in Ubuntu. https://bugs.launchpad.net/bugs/1080674 Title: [QEMU] Corrupted desktop screen for raring desktop installation in QEMU guest (Cirrus graphics). Affects KVM but not VBox. Status in Cairo Graphics Library: Confirmed Status in “cairo” package in Ubuntu: Confirmed Status in “linux” package in Ubuntu: Invalid Status in “xserver-xorg-video-cirrus” package in Ubuntu: Won't Fix Bug description: The desktop screen appears corrupted after raring desktop installation. Please see attached screenshot for how it looks. Going through
[Desktop-packages] [Bug 1308325] [NEW] fglrx (not installed): fglrx kernel module failed to build
Public bug reported: After booting up I get the something went wrong error. See attachments (I guess). ProblemType: Package DistroRelease: Ubuntu 14.04 Package: fglrx (not installed) ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None DKMSKernelVersion: 3.13.0-24-generic Date: Tue Apr 15 15:51:19 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: fglrx-updates, 13.350.1, 3.13.0-24-generic, x86_64: installed virtualbox, 4.3.10, 3.13.0-23-generic, x86_64: installed virtualbox, 4.3.10, 3.13.0-24-generic, x86_64: installed DuplicateSignature: dkms:fglrx:(not installed):/var/lib/dkms/fglrx/13.251/build/2.6.x/firegl_public.c:1758:5: error: incompatible types when returning type ‘kuid_t’ but ‘KCL_TYPE_Uid’ was expected GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde XT [Radeon HD 7770/8760 / R7 250X] [1002:683d] (prog-if 00 [VGA controller]) Subsystem: XFX Pine Group Inc. Device [1682:3232] InstallationDate: Installed on 2014-04-09 (6 days ago) InstallationMedia: Ubuntu-GNOME 14.04 LTS Trusty Tahr - Beta amd64 (20140326.1) MachineType: System manufacturer System Product Name PackageVersion: (not installed) ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=c8c04543-0e8b-4d6e-bbe2-6c54085131c7 ro quiet splash vt.handoff=7 SourcePackage: fglrx-installer Title: fglrx (not installed): fglrx kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/30/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4804 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: RAMPAGE IV GENE dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4804:bd12/30/2013:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnRAMPAGEIVGENE:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz N/A version.fglrx-installer: fglrx-installer N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.0-4ubuntu5 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.0-4ubuntu5 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Tue Apr 15 21:21:23 2014 xserver.configfile: /etc/X11/xorg.conf xserver.errors: AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.15.1-0ubuntu1 xserver.video_driver: fglrx ** Affects: fglrx-installer (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package need-duplicate-check trusty ubuntu -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to fglrx-installer in Ubuntu. https://bugs.launchpad.net/bugs/1308325 Title: fglrx (not installed): fglrx kernel module failed to build Status in “fglrx-installer” package in Ubuntu: New Bug description: After booting up I get the something went wrong error. See attachments (I guess). ProblemType: Package DistroRelease: Ubuntu 14.04 Package: fglrx (not installed) ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None DKMSKernelVersion: 3.13.0-24-generic Date: Tue Apr 15 15:51:19 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: fglrx-updates, 13.350.1, 3.13.0-24-generic,
[Desktop-packages] [Bug 1295064] [NEW] Release print job does nothing
Public bug reported: When I right-click on a print job that is in the Held status and choose Release nothing happens. I would expect it to start printing almost immediately. I get the same result using the toolbar Play button. The job eventually releases itself after 5 minutes. The job goes into the held status usually because the printer isn't ready when I printed it (I rarely use my printer so it's normally turned off). However even after the printer is connected and shows as Idle in Settings-Printers and even prints new jobs while the old one is stuck in the held status, the release function does not work. It seems that the only option is to wait 5 minutes, or cancel the job and re-print. I'm sure that the release function used to work in older versions as I've had this configuration for years. I found the following steps reproduce the problem easily (turn networking on/off instead of the printer as it's a quicker and cleaner than waiting for printer to get its act together): 1) Set up a network printer 2) Make sure everything is working and you are able to print a page 3) Turn off networking 4) Attempt to print a page 5) View it's status in the queue showing held (from the status icon) 6) Turn on networking 7) Try to release the job from (from the queue from the status icon) 8) Observe nothing happens 9) Print a differnt page 10) Observe the new page prints immediately 11) Wait for the original page to print after 5 minutes ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: cups 1.7.0~rc1-0ubuntu5.2 ProcVersionSignature: Ubuntu 3.11.0-18.32-generic 3.11.10.4 Uname: Linux 3.11.0-18-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 CupsErrorLog: Date: Thu Mar 20 10:04:16 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2013-05-03 (320 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) Lpstat: device for HP-Officejet-6500-E709n: hp:/net/Officejet_6500_E709n?zc=dhcppc30 MachineType: System manufacturer V-P5G45 MarkForUpload: True Papersize: a4 PpdFiles: HP-Officejet-6500-E709n: HP Officejet 6500 e709n, hpcups 3.13.9 ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-18-generic root=UUID=1fb8697a-7ed6-41e1-9a44-8c3728862ad7 ro quiet splash vt.handoff=7 SourcePackage: cups UpgradeStatus: Upgraded to saucy on 2014-02-10 (37 days ago) dmi.bios.date: 05/18/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0405 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: V-P5G45 dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0405:bd05/18/2009:svnSystemmanufacturer:pnV-P5G45:pvrSystemVersion:rvnASUSTeKComputerINC.:rnV-P5G45:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: V-P5G45 dmi.product.version: System Version dmi.sys.vendor: System manufacturer ** Affects: cups (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug saucy -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1295064 Title: Release print job does nothing Status in “cups” package in Ubuntu: New Bug description: When I right-click on a print job that is in the Held status and choose Release nothing happens. I would expect it to start printing almost immediately. I get the same result using the toolbar Play button. The job eventually releases itself after 5 minutes. The job goes into the held status usually because the printer isn't ready when I printed it (I rarely use my printer so it's normally turned off). However even after the printer is connected and shows as Idle in Settings-Printers and even prints new jobs while the old one is stuck in the held status, the release function does not work. It seems that the only option is to wait 5 minutes, or cancel the job and re-print. I'm sure that the release function used to work in older versions as I've had this configuration for years. I found the following steps reproduce the problem easily (turn networking on/off instead of the printer as it's a quicker and cleaner than waiting for printer to get its act together): 1) Set up a network printer 2) Make sure everything is working and you are able to print a page 3) Turn off networking 4) Attempt to print a page 5) View it's status in the queue showing held (from the status icon) 6) Turn on networking 7) Try to release the job from (from the queue from the status icon) 8) Observe nothing happens 9) Print a differnt page 10) Observe the new page prints immediately 11) Wait for the original page to print after 5 minutes ProblemType:
Re: [Desktop-packages] [Bug 1278062] Re: firefox crashes on startup (but apparently layunched properly to enable me to post this)
you should never run a GUI application with sudo. you will break many things. http://psychocats.net/ubuntu/graphicalsudo Regards, Phill. P.S. this is NOT what the bug is about, please keep it on topic On 28 February 2014 23:36, ianorlin walteror...@gmail.com wrote: I am not sure running sudo firefox is the best idea from a security standpoint. Also I am not sure this is theme issue as when changing the gtk widget in lxapperance I can get the segmentation fault wihtout the output about themes. -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1278062 Title: firefox crashes on startup (but apparently layunched properly to enable me to post this) Status in firefox package in Ubuntu: Confirmed Bug description: I tried launching from a terminal window after the first crash and got this: ~$ firefox (process:2974): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed Segmentation fault (core dumped) ~$ ~$ lsb_release -rd Description: Ubuntu Trusty Tahr (development branch) Release: 14.04 ~$ apt-cache policy firefox firefox: Installed: 25.0+build3-0ubuntu0.13.10.1 Candidate: 25.0+build3-0ubuntu0.13.10.1 Version table: *** 25.0+build3-0ubuntu0.13.10.1 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status ~$ ProblemType: Crash DistroRelease: Ubuntu 14.04 Package: firefox 25.0+build3-0ubuntu0.13.10.1 ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: a 1919 F pulseaudio BuildID: 20131028112446 CRDA: Error: [Errno 2] No such file or directory: 'iw' Channel: Unavailable CrashCounter: 1 CurrentDesktop: LXDE Date: Sun Feb 9 05:43:26 2014 ExecutablePath: /usr/lib/firefox/firefox ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2013-11-22 (78 days ago) InstallationMedia: Lubuntu 14.04 Trusty Tahr - Alpha amd64 (20131102) IpRoute: default via 192.168.0.1 dev wlan0 proto static 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.101 metric 9 MostRecentCrashID: bp-3359569a-fc3a-40e2-978d-e68d72120711 PrefSources: prefs.js [Profile]/extensions/{3d7eb24f-2740-49df-8937-200b1cc08f8a}/defaults/preferences/flashblock.js [Profile]/extensions/{0545b830-f0aa-4d7e-8820-50a4629a56fe}/defaults/preferences/defaults.js ProcCmdline: /usr/lib/firefox/firefox Profiles: Profile0 (Default) - LastVersion=25.0/20131028112446 RelatedPackageVersions: gecko-mediaplayer 1.0.8-4ubuntu1 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no RunningIncompatibleAddons: False SegvAnalysis: Skipped: missing required field Disassembly Signal: 11 SourcePackage: firefox SubmittedCrashIDs: bp-3359569a-fc3a-40e2-978d-e68d72120711 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 02/17/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 5.12 dmi.board.name: NutMeg dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.02 dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr5.12:bd02/17/2009:svnHP-Pavilion:pnFQ578AAR-ABAs3707c:pvr:rvnPEGATRONCORPORATION:rnNutMeg:rvr1.02:cvnHewlett-Packard:ct3:cvrChassisVersion: dmi.product.name: FQ578AAR-ABA s3707c dmi.sys.vendor: HP-Pavilion To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1278062/+subscriptions -- https://wiki.ubuntu.com/phillw -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1278062 Title: firefox crashes on startup (but apparently layunched properly to enable me to post this) Status in “firefox” package in Ubuntu: Confirmed Bug description: I tried launching from a terminal window after the first crash and got this: ~$ firefox (process:2974): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed Segmentation fault (core dumped) ~$ ~$ lsb_release -rd Description: Ubuntu Trusty Tahr (development branch) Release: 14.04 ~$ apt-cache policy firefox firefox: Installed: 25.0+build3-0ubuntu0.13.10.1 Candidate
[Desktop-packages] [Bug 1278062] Re: firefox crashes on startup (but apparently layunched properly to enable me to post this)
Hi, whichever GTK theme lubuntu 14.04 uses as default is that answer. http://lubuntublog.blogspot.co.uk/2014/02/theme-convergence.html should have the answer, if not then feel free to ask Rafael (head of our artwork team for lubuntu). -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1278062 Title: firefox crashes on startup (but apparently layunched properly to enable me to post this) Status in “firefox” package in Ubuntu: Confirmed Bug description: I tried launching from a terminal window after the first crash and got this: ~$ firefox (process:2974): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed Segmentation fault (core dumped) ~$ ~$ lsb_release -rd Description: Ubuntu Trusty Tahr (development branch) Release: 14.04 ~$ apt-cache policy firefox firefox: Installed: 25.0+build3-0ubuntu0.13.10.1 Candidate: 25.0+build3-0ubuntu0.13.10.1 Version table: *** 25.0+build3-0ubuntu0.13.10.1 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status ~$ ProblemType: Crash DistroRelease: Ubuntu 14.04 Package: firefox 25.0+build3-0ubuntu0.13.10.1 ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: a 1919 F pulseaudio BuildID: 20131028112446 CRDA: Error: [Errno 2] No such file or directory: 'iw' Channel: Unavailable CrashCounter: 1 CurrentDesktop: LXDE Date: Sun Feb 9 05:43:26 2014 ExecutablePath: /usr/lib/firefox/firefox ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2013-11-22 (78 days ago) InstallationMedia: Lubuntu 14.04 Trusty Tahr - Alpha amd64 (20131102) IpRoute: default via 192.168.0.1 dev wlan0 proto static 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.101 metric 9 MostRecentCrashID: bp-3359569a-fc3a-40e2-978d-e68d72120711 PrefSources: prefs.js [Profile]/extensions/{3d7eb24f-2740-49df-8937-200b1cc08f8a}/defaults/preferences/flashblock.js [Profile]/extensions/{0545b830-f0aa-4d7e-8820-50a4629a56fe}/defaults/preferences/defaults.js ProcCmdline: /usr/lib/firefox/firefox Profiles: Profile0 (Default) - LastVersion=25.0/20131028112446 RelatedPackageVersions: gecko-mediaplayer 1.0.8-4ubuntu1 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no RunningIncompatibleAddons: False SegvAnalysis: Skipped: missing required field Disassembly Signal: 11 SourcePackage: firefox SubmittedCrashIDs: bp-3359569a-fc3a-40e2-978d-e68d72120711 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 02/17/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 5.12 dmi.board.name: NutMeg dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.02 dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr5.12:bd02/17/2009:svnHP-Pavilion:pnFQ578AAR-ABAs3707c:pvr:rvnPEGATRONCORPORATION:rnNutMeg:rvr1.02:cvnHewlett-Packard:ct3:cvrChassisVersion: dmi.product.name: FQ578AAR-ABA s3707c dmi.sys.vendor: HP-Pavilion To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1278062/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1278062] Re: firefox crashes on startup (but apparently layunched properly to enable me to post this)
phillw is using lubuntu 14.04. My crash seemed to refer to a language pack mis-match of some type or other, but has been marked as a dupe by some one :) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1278062 Title: firefox crashes on startup (but apparently layunched properly to enable me to post this) Status in “firefox” package in Ubuntu: Confirmed Bug description: I tried launching from a terminal window after the first crash and got this: ~$ firefox (process:2974): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed Segmentation fault (core dumped) ~$ ~$ lsb_release -rd Description: Ubuntu Trusty Tahr (development branch) Release: 14.04 ~$ apt-cache policy firefox firefox: Installed: 25.0+build3-0ubuntu0.13.10.1 Candidate: 25.0+build3-0ubuntu0.13.10.1 Version table: *** 25.0+build3-0ubuntu0.13.10.1 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status ~$ ProblemType: Crash DistroRelease: Ubuntu 14.04 Package: firefox 25.0+build3-0ubuntu0.13.10.1 ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: a 1919 F pulseaudio BuildID: 20131028112446 CRDA: Error: [Errno 2] No such file or directory: 'iw' Channel: Unavailable CrashCounter: 1 CurrentDesktop: LXDE Date: Sun Feb 9 05:43:26 2014 ExecutablePath: /usr/lib/firefox/firefox ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2013-11-22 (78 days ago) InstallationMedia: Lubuntu 14.04 Trusty Tahr - Alpha amd64 (20131102) IpRoute: default via 192.168.0.1 dev wlan0 proto static 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.101 metric 9 MostRecentCrashID: bp-3359569a-fc3a-40e2-978d-e68d72120711 PrefSources: prefs.js [Profile]/extensions/{3d7eb24f-2740-49df-8937-200b1cc08f8a}/defaults/preferences/flashblock.js [Profile]/extensions/{0545b830-f0aa-4d7e-8820-50a4629a56fe}/defaults/preferences/defaults.js ProcCmdline: /usr/lib/firefox/firefox Profiles: Profile0 (Default) - LastVersion=25.0/20131028112446 RelatedPackageVersions: gecko-mediaplayer 1.0.8-4ubuntu1 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no RunningIncompatibleAddons: False SegvAnalysis: Skipped: missing required field Disassembly Signal: 11 SourcePackage: firefox SubmittedCrashIDs: bp-3359569a-fc3a-40e2-978d-e68d72120711 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 02/17/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 5.12 dmi.board.name: NutMeg dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.02 dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr5.12:bd02/17/2009:svnHP-Pavilion:pnFQ578AAR-ABAs3707c:pvr:rvnPEGATRONCORPORATION:rnNutMeg:rvr1.02:cvnHewlett-Packard:ct3:cvrChassisVersion: dmi.product.name: FQ578AAR-ABA s3707c dmi.sys.vendor: HP-Pavilion To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1278062/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1278062] Re: firefox crashes on startup (but apparently layunched properly to enable me to post this)
@Chris Coulson. Just had a look into /var/log... it seems there is a failure earlier, and not just for firefox. gnomeplayer reported a crash... ERROR: apport (pid 16477) Mon Feb 24 10:08:16 2014: called for pid 16447, signal 5, core limit 0 ERROR: apport (pid 16477) Mon Feb 24 10:08:16 2014: executable: /usr/bin/gnome-mplayer (command line /usr/bin/gnome-mplayer --window=54102218 --controlid=25263 --width=1600 --height=674 --autostart=1 --showcontrols=1) ERROR: apport (pid 16477) Mon Feb 24 10:08:16 2014: gdbus call error: Error: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files ERROR: apport (pid 16477) Mon Feb 24 10:08:16 2014: debug: session gdbus call: ERROR: apport (pid 16477) Mon Feb 24 10:08:22 2014: wrote report /var/crash/_usr_bin_gnome-mplayer.1000.crash ERROR: apport (pid 17555) Mon Feb 24 11:18:04 2014: called for pid 4535, signal 11, core limit 0 Now when firefox then crashed out. ERROR: apport (pid 17555) Mon Feb 24 11:18:04 2014: executable: /usr/lib/firefox/firefox (command line /usr/lib/firefox/firefox) ERROR: apport (pid 17555) Mon Feb 24 11:18:04 2014: gdbus call error: Error: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files ERROR: apport (pid 17555) Mon Feb 24 11:18:04 2014: debug: session gdbus call: ERROR: apport (pid 17555) Mon Feb 24 11:19:18 2014: wrote report /var/crash/_usr_lib_firefox_firefox.1000.crash Hope this is of help... I've taken a backup of /var/log in case you need it in its entireity (I did some re-boots, tried re-installing etc). -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1278062 Title: firefox crashes on startup (but apparently layunched properly to enable me to post this) Status in “firefox” package in Ubuntu: Confirmed Bug description: I tried launching from a terminal window after the first crash and got this: ~$ firefox (process:2974): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed Segmentation fault (core dumped) ~$ ~$ lsb_release -rd Description: Ubuntu Trusty Tahr (development branch) Release: 14.04 ~$ apt-cache policy firefox firefox: Installed: 25.0+build3-0ubuntu0.13.10.1 Candidate: 25.0+build3-0ubuntu0.13.10.1 Version table: *** 25.0+build3-0ubuntu0.13.10.1 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status ~$ ProblemType: Crash DistroRelease: Ubuntu 14.04 Package: firefox 25.0+build3-0ubuntu0.13.10.1 ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: a 1919 F pulseaudio BuildID: 20131028112446 CRDA: Error: [Errno 2] No such file or directory: 'iw' Channel: Unavailable CrashCounter: 1 CurrentDesktop: LXDE Date: Sun Feb 9 05:43:26 2014 ExecutablePath: /usr/lib/firefox/firefox ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2013-11-22 (78 days ago) InstallationMedia: Lubuntu 14.04 Trusty Tahr - Alpha amd64 (20131102) IpRoute: default via 192.168.0.1 dev wlan0 proto static 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.101 metric 9 MostRecentCrashID: bp-3359569a-fc3a-40e2-978d-e68d72120711 PrefSources: prefs.js [Profile]/extensions/{3d7eb24f-2740-49df-8937-200b1cc08f8a}/defaults/preferences/flashblock.js [Profile]/extensions/{0545b830-f0aa-4d7e-8820-50a4629a56fe}/defaults/preferences/defaults.js ProcCmdline: /usr/lib/firefox/firefox Profiles: Profile0 (Default) - LastVersion=25.0/20131028112446 RelatedPackageVersions: gecko-mediaplayer 1.0.8-4ubuntu1 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no RunningIncompatibleAddons: False SegvAnalysis: Skipped: missing required field Disassembly Signal: 11 SourcePackage: firefox SubmittedCrashIDs: bp-3359569a-fc3a-40e2-978d-e68d72120711 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 02/17/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 5.12 dmi.board.name: NutMeg dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.02 dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias:
[Desktop-packages] [Bug 1282093] [NEW] Files Applications in Security Privacy Settings Hangs
Public bug reported: In Files Applications, after clicking Clear Usage Data... and choosing to clear all data, control returned to the main window but it became unresponsive with heavy disc activity, which is still going several minutes later. I was able to click the + button on the Exclude list which may have aggrevated the situation, after showing an unresponsive pop-up menu (folder/application selection) it eventually displayed a blank window showing Select Application, which remained blank and eventually closed. Several minutes (at least 5) later, still with disc thrashing, the window remains unresponsive and occasionally turns grey. I'll comment if it eventually becomes responsive again or if I decide to kill it. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: gnome-control-center 1:3.6.3-0ubuntu45.2 ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Wed Feb 19 13:40:24 2014 EcryptfsInUse: Yes ExecutablePath: /usr/bin/gnome-control-center InstallationDate: Installed on 2013-05-03 (291 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MarkForUpload: True ProcEnviron: XDG_RUNTIME_DIR=set SHELL=/bin/bash LANGUAGE=en_GB:en PATH=(custom, no user) LANG=en_GB.UTF-8 SourcePackage: gnome-control-center UpgradeStatus: Upgraded to saucy on 2014-02-10 (8 days ago) usr_lib_gnome-control-center: activity-log-manager 0.9.7-0ubuntu4 deja-dup 27.3.1-0ubuntu1 gnome-control-center-datetime 13.10.0+13.10.20131023.2-0ubuntu1 gnome-control-center-signon 0.1.7~+13.10.20130724.1-0ubuntu1 gnome-control-center-unity1.3+13.10.20131004-0ubuntu1 ** Affects: gnome-control-center (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug saucy -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1282093 Title: Files Applications in Security Privacy Settings Hangs Status in “gnome-control-center” package in Ubuntu: New Bug description: In Files Applications, after clicking Clear Usage Data... and choosing to clear all data, control returned to the main window but it became unresponsive with heavy disc activity, which is still going several minutes later. I was able to click the + button on the Exclude list which may have aggrevated the situation, after showing an unresponsive pop-up menu (folder/application selection) it eventually displayed a blank window showing Select Application, which remained blank and eventually closed. Several minutes (at least 5) later, still with disc thrashing, the window remains unresponsive and occasionally turns grey. I'll comment if it eventually becomes responsive again or if I decide to kill it. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: gnome-control-center 1:3.6.3-0ubuntu45.2 ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Wed Feb 19 13:40:24 2014 EcryptfsInUse: Yes ExecutablePath: /usr/bin/gnome-control-center InstallationDate: Installed on 2013-05-03 (291 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MarkForUpload: True ProcEnviron: XDG_RUNTIME_DIR=set SHELL=/bin/bash LANGUAGE=en_GB:en PATH=(custom, no user) LANG=en_GB.UTF-8 SourcePackage: gnome-control-center UpgradeStatus: Upgraded to saucy on 2014-02-10 (8 days ago) usr_lib_gnome-control-center: activity-log-manager 0.9.7-0ubuntu4 deja-dup 27.3.1-0ubuntu1 gnome-control-center-datetime 13.10.0+13.10.20131023.2-0ubuntu1 gnome-control-center-signon 0.1.7~+13.10.20130724.1-0ubuntu1 gnome-control-center-unity1.3+13.10.20131004-0ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1282093/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1282093] Re: Files Applications in Security Privacy Settings Hangs
Killed the process after a runtime of 23 minutes, disc activity stopped immediately. Re-launched and re-cleared the history, everything was responding normally, except about 15-30 seconds later the window froze again with heavy disc activity. Killed it and tried again and the hang appears to occur several seconds after choosing to clear history - I clicked on a tick box every second or so until it stopped responding. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1282093 Title: Files Applications in Security Privacy Settings Hangs Status in “gnome-control-center” package in Ubuntu: New Bug description: In Files Applications, after clicking Clear Usage Data... and choosing to clear all data, control returned to the main window but it became unresponsive with heavy disc activity, which is still going several minutes later. I was able to click the + button on the Exclude list which may have aggrevated the situation, after showing an unresponsive pop-up menu (folder/application selection) it eventually displayed a blank window showing Select Application, which remained blank and eventually closed. Several minutes (at least 5) later, still with disc thrashing, the window remains unresponsive and occasionally turns grey. I'll comment if it eventually becomes responsive again or if I decide to kill it. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: gnome-control-center 1:3.6.3-0ubuntu45.2 ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Wed Feb 19 13:40:24 2014 EcryptfsInUse: Yes ExecutablePath: /usr/bin/gnome-control-center InstallationDate: Installed on 2013-05-03 (291 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MarkForUpload: True ProcEnviron: XDG_RUNTIME_DIR=set SHELL=/bin/bash LANGUAGE=en_GB:en PATH=(custom, no user) LANG=en_GB.UTF-8 SourcePackage: gnome-control-center UpgradeStatus: Upgraded to saucy on 2014-02-10 (8 days ago) usr_lib_gnome-control-center: activity-log-manager 0.9.7-0ubuntu4 deja-dup 27.3.1-0ubuntu1 gnome-control-center-datetime 13.10.0+13.10.20131023.2-0ubuntu1 gnome-control-center-signon 0.1.7~+13.10.20130724.1-0ubuntu1 gnome-control-center-unity1.3+13.10.20131004-0ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1282093/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1274691] [NEW] Screen not locked when coming out of suspend/hibernate
Public bug reported: Occasionally, after coming out of suspend the screen sometimes is unlocked and visible for over a second before the lock screen kicks in. I'm pretty sure I've managed to click on stuff when the lock screen has been particularly slow to kick in. The screen also shows a message box saying Computer will suspend very soon because of inactivity - which needs OK/Cancel clicking as it doesn't go away on its own after waking. Not sure if this is related as it happens even if the problem itself does not occur. Thought I'd mention is for completeness but I think it's already been reported as a bug in its own right. My computer is configured to do nothing on screen close (it does lock when the screen turns off, which happens on lid close), but to suspend only after 5 minutes of inactivity. This appears to work correctly every time. I can finish using it, close the lid then it suspends 5 minutes or so later. I'm partly inclined to consider this a security vulnerability, but mainly find it a little frustrating and confusing. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: gnome-screensaver 3.6.1-0ubuntu7 ProcVersionSignature: Ubuntu 3.11.0-17.30-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Thu Jan 30 19:58:28 2014 EcryptfsInUse: Yes GnomeSessionIdleInhibited: No GnomeSessionInhibitors: None GsettingsGnomeSession: org.gnome.desktop.session idle-delay uint32 300 org.gnome.desktop.session session-name 'ubuntu' InstallationDate: Installed on 2013-05-07 (268 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MarkForUpload: True ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: gnome-screensaver Symptom: security Title: Screen not locked when coming out of suspend/hibernate UpgradeStatus: Upgraded to saucy on 2013-12-02 (58 days ago) ** Affects: gnome-screensaver (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug saucy -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-screensaver in Ubuntu. https://bugs.launchpad.net/bugs/1274691 Title: Screen not locked when coming out of suspend/hibernate Status in “gnome-screensaver” package in Ubuntu: New Bug description: Occasionally, after coming out of suspend the screen sometimes is unlocked and visible for over a second before the lock screen kicks in. I'm pretty sure I've managed to click on stuff when the lock screen has been particularly slow to kick in. The screen also shows a message box saying Computer will suspend very soon because of inactivity - which needs OK/Cancel clicking as it doesn't go away on its own after waking. Not sure if this is related as it happens even if the problem itself does not occur. Thought I'd mention is for completeness but I think it's already been reported as a bug in its own right. My computer is configured to do nothing on screen close (it does lock when the screen turns off, which happens on lid close), but to suspend only after 5 minutes of inactivity. This appears to work correctly every time. I can finish using it, close the lid then it suspends 5 minutes or so later. I'm partly inclined to consider this a security vulnerability, but mainly find it a little frustrating and confusing. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: gnome-screensaver 3.6.1-0ubuntu7 ProcVersionSignature: Ubuntu 3.11.0-17.30-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Thu Jan 30 19:58:28 2014 EcryptfsInUse: Yes GnomeSessionIdleInhibited: No GnomeSessionInhibitors: None GsettingsGnomeSession: org.gnome.desktop.session idle-delay uint32 300 org.gnome.desktop.session session-name 'ubuntu' InstallationDate: Installed on 2013-05-07 (268 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MarkForUpload: True ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: gnome-screensaver Symptom: security Title: Screen not locked when coming out of suspend/hibernate UpgradeStatus: Upgraded to saucy on 2013-12-02 (58 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-screensaver/+bug/1274691/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 867753] Re: Accept-Language header contains incorrect value
** Changed in: firefox (Ubuntu) Status: Triaged = Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/867753 Title: Accept-Language header contains incorrect value Status in The Mozilla Firefox Browser: Invalid Status in “firefox” package in Ubuntu: Invalid Bug description: Both my OS and Firefox preferences has en-GB and en as the language, however, it's sending en-US, en in the accept-language request header. This was verified using Bugzilla after finding the problem. Dates on some sites are a particular problem given that for many dates there is no way to tell the difference between en-GB and en-US, you just read the date wrong. Steps to reproduce: 1) Start Firefox 2) In Edit - Preferences - check the lanugage settings are en-gb and en. 3) Start Firebug. 4) Access www.google.co.uk 5) Check the Net tab in firebug. 6) Expand the first (or any line). 7) Scroll to the Request Headers. 8) Observe Accept-language contains en-us,en;q=0.5. ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: firefox 7.0.1+build1+nobinonly-0ubuntu0.11.04.1 ProcVersionSignature: Ubuntu 2.6.38-11.50-generic 2.6.38.8 Uname: Linux 2.6.38-11-generic x86_64 AddonCompatCheckDisabled: False AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: phill 1675 F pulseaudio BuildID: 20110928224508 CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf680 irq 43' Mixer name : 'Intel IbexPeak HDMI' Components : 'HDA:10ec0662,14621033,00100101 HDA:80862804,14621033,0010' Controls : 20 Simple ctrls : 11 Channel: release Date: Tue Oct 4 19:03:40 2011 EcryptfsInUse: Yes ForcedLayersAccel: False IfupdownConfig: auto lo iface lo inet loopback InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release amd64 (20110427.1) IpRoute: 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.2 metric 2 169.254.0.0/16 dev wlan0 scope link metric 1000 default via 192.168.0.1 dev wlan0 proto static ProcEnviron: LANGUAGE=en_GB:en LANG=en_GB.UTF-8 SHELL=/bin/bash Profiles: Profile0 (Default) - LastVersion=7.0.1/20110928224508 (Running) RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no RunningIncompatibleAddons: False SourcePackage: firefox UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/21/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: E1681IG6 VER.109 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: To be filled by O.E.M. dmi.board.vendor: Micro-Star International dmi.board.version: Ver.001 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: Micro-Star International dmi.chassis.version: Ver.001 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrE1681IG6VER.109:bd07/21/2010:svnMicro-StarInternational:pnCalpellaplatform:pvrVer.001:rvnMicro-StarInternational:rnTobefilledbyO.E.M.:rvrVer.001:cvnMicro-StarInternational:ct9:cvrVer.001: dmi.product.name: Calpella platform dmi.product.version: Ver.001 dmi.sys.vendor: Micro-Star International To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/867753/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1205384] Re: Lock can be circumvented by switching to console
Hmm, added the patch and now 'Lock Screen' no longer has any affect! I'll have to bite the bullet and do a clean re-install, this system has had a lot done to it since the alpha1 of 13.10 came out! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1205384 Title: Lock can be circumvented by switching to console Status in LXDE - Lightweight X11 Desktop Environment: New Status in “lightdm” package in Ubuntu: Invalid Status in “lxsession” package in Ubuntu: In Progress Bug description: Steps to reproduce: 1)lock your screen using dm-tool switch-to-greeter or dm-tool lock 2)switch to console via ctrl+alt+F1 3)switch back to X via ctrl+alt+F7 Result: session is unlocked without entering a password Expected behaviour: session should still be locked when switching back to X ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: lightdm 1.7.7-0ubuntu2 ProcVersionSignature: Ubuntu 3.10.0-5.15-generic 3.10.2 Uname: Linux 3.10.0-5-generic i686 ApportVersion: 2.11-0ubuntu1 Architecture: i386 Date: Fri Jul 26 17:30:23 2013 InstallationDate: Installed on 2013-07-26 (0 days ago) InstallationMedia: Lubuntu 13.10 Saucy Salamander - Alpha i386 (20130723.1) MarkForUpload: True SourcePackage: lightdm UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/lxde/+bug/1205384/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 933726] Re: Firefox, incorrect language pack on PPC
Lubuntu 12.04 reached EOL at the end of October/2013. I'm not able to test once I deal with i386 only. But now the bug is invalid, won't fix or need to test on the current support/stable releases: 12.10, 13.04, 13.10 and the dev 14.04. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/933726 Title: Firefox, incorrect language pack on PPC Status in “firefox” package in Ubuntu: Won't Fix Bug description: DistroRelease: Ubuntu 12.04 InstallationMedia: Lubuntu 12.04 Precise Pangolin - Alpha powerpc (20120215) Firefox on that live-cd is 10, the language packages are 11 (and not compatible)! what was expected - the language pack to be compatible what happened - they are not. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/933726/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1096603] Re: Chromium reports It's dead Jim on Low RAM machines
Chad, I still use chromium and am more than happy to test for you. Just give me a poke in the ribs as and when you would like something testing. I have VM's we can break :D I use Chromium for my general browser usage and also have F/fox running. Do not become a stranger because lubuntu has moved to F/fox for 13.10. Regards, Phill. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1096603 Title: Chromium reports It's dead Jim on Low RAM machines Status in “chromium-browser” package in Ubuntu: Confirmed Bug description: When running certain tabs, chromium browser eventually reports the above error. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: chromium-browser 22.0.1229.94~r161065-0ubuntu1 ProcVersionSignature: Ubuntu 3.5.0-21.32-generic 3.5.7.1 Uname: Linux 3.5.0-21-generic x86_64 ApportVersion: 2.6.1-0ubuntu9 Architecture: amd64 Date: Sun Jan 6 15:09:12 2013 Desktop-Session: DESKTOP_SESSION = Lubuntu XDG_CONFIG_DIRS = /etc/xdg/lubuntu/:/etc/xdg/xdg-Lubuntu:/etc/xdg XDG_DATA_DIRS = /etc/xdg/lubuntu:/usr/share/Lubuntu:/usr/local/share/:/usr/share/:/usr/share:/usr/share/gdm:/var/lib/menu-xdg DiskUsage: b'Filesystem Type Size Used Avail Use% Mounted on\n/dev/vda1 ext4 9.4G 2.6G 6.4G 29% /\nudev devtmpfs 237M 4.0K 237M 1% /dev\ntmpfs tmpfs 99M 712K 98M 1% /run\nnone tmpfs 5.0M 0 5.0M 0% /run/lock\nnone tmpfs 246M 132K 246M 1% /run/shm\nnone tmpfs 100M 8.0K 100M 1% /run/user\n' Inodes: b'Filesystem Inodes IUsed IFree IUse% Mounted on\n/dev/vda1608K 139K 470K 23% /\nudev 60K 425 59K1% /dev\ntmpfs 62K 330 62K1% /run\nnone 62K 3 62K1% /run/lock\nnone 62K 4 62K1% /run/shm\nnone 62K 9 62K1% /run/user\n' Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None ExecutablePath: /usr/lib/chromium-browser/chromium-browser InstallationDate: Installed on 2013-01-04 (1 days ago) InstallationMedia: Lubuntu 12.10 Quantal Quetzal - Release amd64 (20121017) MarkForUpload: True ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: chromium-browser UpgradeStatus: No upgrade log present (probably fresh install) chromium-default: CHROMIUM_FLAGS= gconf-keys: /desktop/gnome/applications/browser/exec = b''/desktop/gnome/url-handlers/https/command = b''/desktop/gnome/url-handlers/https/enabled = b''/desktop/gnome/url-handlers/http/command = b''/desktop/gnome/url-handlers/http/enabled = b''/desktop/gnome/session/required_components/windowmanager = b''/apps/metacity/general/compositing_manager = b''/desktop/gnome/interface/icon_theme = b''/desktop/gnome/interface/gtk_theme = b'' To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1096603/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1227688] [NEW] Some images in firefox do not display correctly
Public bug reported: The following document displays corrupt images in Firefox: !DOCTYPE html htmlbody img style=max-width: 300px src=https://farm8.staticflickr.com/7427/8791626143_140724b5db_z.jpg; / img style=max-width: 300px src=https://farm8.staticflickr.com/7427/8791626143_140724b5db_z.jpg; / img style=max-width: 300px src=https://farm8.staticflickr.com/7427/8791626143_140724b5db_z.jpg; / img style=max-width: 300px src=https://farm8.staticflickr.com/7427/8791626143_140724b5db_z.jpg; / img style=max-width: 300px src=https://farm8.staticflickr.com/7427/8791626143_140724b5db_z.jpg; / /body/html The problem is that one line of pixels is repeated for about 1-2cm then another line cuts in for the same amount and so on. I can't grab the screen as this immediately fixes the images, as does scrolling. I've uploaded a photograph. I'm reporting this as a bug in Firefox (rather than thinking that the images as faulty) because: 1) images will display correctly occasionally, after scrolling or ALT-TABing to another application and back, 2) images display correctly in other applications that I've tried (including image viewer and GIMP), 3) I have the same problem on two different computers and 4) the problem does not occur in Midori (a webkit-based browser) If the document is reduced to a single image then it displays correctly. The images render correctly in every other application that I've tried. I have a few other examples if required. Saving the images locally reduces the problem, sometimes one of the images will display incorrectly (one line of pixels fills the image). So there's a possibility that the amount of pixel-repeat is linked to the download speed. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: firefox 24.0+build1-0ubuntu0.13.04.1 ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6 Uname: Linux 3.8.0-30-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: phill 2193 F pulseaudio /dev/snd/controlC1: phill 2193 F pulseaudio BuildID: 20130911155223 CRDA: country GB: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20) (5250 - 5330 @ 40), (N/A, 20), DFS (5490 - 5710 @ 40), (N/A, 27), DFS Channel: Unavailable Date: Thu Sep 19 14:43:11 2013 EcryptfsInUse: Yes ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2013-05-03 (138 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) IpRoute: default via 192.168.1.1 dev wlan3 proto static 169.254.0.0/16 dev wlan3 scope link metric 1000 192.168.1.0/24 dev wlan3 proto kernel scope link src 192.168.1.2 metric 9 MarkForUpload: True MostRecentCrashID: bp-b4ffaf97-bb5a-4c64-bef3-2708e2121105 PrefSources: prefs.js ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash Profiles: Profile0 (Default) - LastVersion=24.0/20130911155223 (In use) RelatedPackageVersions: totem-mozilla 3.6.3-0ubuntu6 rhythmbox-mozilla 2.98-0ubuntu5 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no RunningIncompatibleAddons: False SourcePackage: firefox SubmittedCrashIDs: bp-b4ffaf97-bb5a-4c64-bef3-2708e2121105 bp-91c39667-1bbd-4c7b-95e8-0b0b52120826 UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/10/2008 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0311 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: V-P5G45 dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0311:bd12/10/2008:svnSystemmanufacturer:pnV-P5G45:pvrSystemVersion:rvnASUSTeKComputerINC.:rnV-P5G45:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: V-P5G45 dmi.product.version: System Version dmi.sys.vendor: System manufacturer ** Affects: firefox (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug raring ** Attachment added: IMAG0156_1.jpg https://bugs.launchpad.net/bugs/1227688/+attachment/3829199/+files/IMAG0156_1.jpg ** Description changed: - The following document displays corrupt images in FIrefox: + The following document displays corrupt images in Firefox: !DOCTYPE html htmlbody img style=max-width: 300px src=https://farm8.staticflickr.com/7427/8791626143_140724b5db_z.jpg; / img style=max-width: 300px src=https://farm8.staticflickr.com/7427/8791626143_140724b5db_z.jpg; / img style=max-width: 300px src=https://farm8.staticflickr.com/7427/8791626143_140724b5db_z.jpg; / img style=max-width: 300px src=https://farm8.staticflickr.com/7427/8791626143_140724b5db_z.jpg; / img style=max-width
[Desktop-packages] [Bug 1203984] Re: Lubuntu does not get past the plymouth dots
Running Alpha 2 with lightdm 1.7.7 works fine on AMD 64 Respins of alpha2 have been requested. ** Changed in: lightdm (Ubuntu) Status: Incomplete = Confirmed ** Changed in: lightdm (Ubuntu) Status: Confirmed = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1203984 Title: Lubuntu does not get past the plymouth dots Status in “lightdm” package in Ubuntu: Fix Released Bug description: Booting a live session of Lubuntu Saucy Alpha 2 desktop 32-bit does not get past the ubiquity dots. When booted without the default options quiet splash I see the following *fail* messages (when starting programs) 1. cups (should not be a show stopper) 2. zRAM (probably not a show stopper) 3. lightdm It is possible to run a text screen with ctrl+alt+F1. It is responsive, several text applications work, also the network. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: lightdm 1.7.6-0ubuntu1 ProcVersionSignature: Ubuntu 3.10.0-4.13-generic 3.10.1 Uname: Linux 3.10.0-4-generic i686 ApportVersion: 2.11-0ubuntu1 Architecture: i386 CasperVersion: 1.335 Date: Tue Jul 23 06:54:26 2013 LiveMediaBuild: Lubuntu 13.10 Saucy Salamander - Alpha i386 (20130722) MarkForUpload: True ProcEnviron: TERM=linux PATH=(custom, no user) LANG=sv_SE.UTF-8 SHELL=/bin/bash SourcePackage: lightdm UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1203984/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1203283] [NEW] Online accounts SIP settings looks like it doesn't work
Public bug reported: When adding a SIP account to online accounts, the settings area is blank for over a minute then the settings appear - but you can hit the cancel/done button and there's no indication in the UI that it's busy . It just looks like it doesn't work unless you persivere and wait for a while. After adding an account it seems to ignore when the use this account to call landlines and mobile phone, clicking Done and going back in (it's quick this time) and the tick is missing (this is the dispay wrong values bit. Completely quit (gnome-control-centre) and go back in to look and it's ticked (after waiting ages for the settings to appear). ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: gnome-control-center 1:3.6.3-0ubuntu24.1 ProcVersionSignature: Ubuntu 3.8.0-26.38-generic 3.8.13.2 Uname: Linux 3.8.0-26-generic x86_64 ApportVersion: 2.9.2-0ubuntu8.1 Architecture: amd64 Date: Sat Jul 20 12:24:50 2013 EcryptfsInUse: Yes ExecutablePath: /usr/bin/gnome-control-center InstallationDate: Installed on 2013-05-07 (73 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MarkForUpload: True ProcEnviron: SHELL=/bin/bash XDG_RUNTIME_DIR=set PATH=(custom, no user) LANGUAGE=en_GB:en LANG=en_GB.UTF-8 SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) XsessionErrors: (nautilus:2236): GLib-GObject-CRITICAL **: g_object_set: assertion `G_IS_OBJECT (object)' failed (nautilus:2236): GLib-GObject-CRITICAL **: g_object_set: assertion `G_IS_OBJECT (object)' failed (process:2678): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu6.1 deja-dup26.0-0ubuntu1 gnome-control-center-signon 0.1.6bzr13.04.05-0ubuntu1.1 gnome-control-center-unity 1.2daily13.04.09-0ubuntu1 indicator-datetime 12.10.3daily13.03.26-0ubuntu1 ** Affects: gnome-control-center (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug raring -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1203283 Title: Online accounts SIP settings looks like it doesn't work Status in “gnome-control-center” package in Ubuntu: New Bug description: When adding a SIP account to online accounts, the settings area is blank for over a minute then the settings appear - but you can hit the cancel/done button and there's no indication in the UI that it's busy . It just looks like it doesn't work unless you persivere and wait for a while. After adding an account it seems to ignore when the use this account to call landlines and mobile phone, clicking Done and going back in (it's quick this time) and the tick is missing (this is the dispay wrong values bit. Completely quit (gnome-control-centre) and go back in to look and it's ticked (after waiting ages for the settings to appear). ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: gnome-control-center 1:3.6.3-0ubuntu24.1 ProcVersionSignature: Ubuntu 3.8.0-26.38-generic 3.8.13.2 Uname: Linux 3.8.0-26-generic x86_64 ApportVersion: 2.9.2-0ubuntu8.1 Architecture: amd64 Date: Sat Jul 20 12:24:50 2013 EcryptfsInUse: Yes ExecutablePath: /usr/bin/gnome-control-center InstallationDate: Installed on 2013-05-07 (73 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MarkForUpload: True ProcEnviron: SHELL=/bin/bash XDG_RUNTIME_DIR=set PATH=(custom, no user) LANGUAGE=en_GB:en LANG=en_GB.UTF-8 SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) XsessionErrors: (nautilus:2236): GLib-GObject-CRITICAL **: g_object_set: assertion `G_IS_OBJECT (object)' failed (nautilus:2236): GLib-GObject-CRITICAL **: g_object_set: assertion `G_IS_OBJECT (object)' failed (process:2678): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu6.1 deja-dup26.0-0ubuntu1 gnome-control-center-signon 0.1.6bzr13.04.05-0ubuntu1.1 gnome-control-center-unity 1.2daily13.04.09-0ubuntu1 indicator-datetime 12.10.3daily13.03.26-0ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1203283/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1052849] Re: Chrominum out of date and has various issues not seen in Chrome
Not wishing to pull up a bug team member, but the version of Chromium at the time of my writing this is actually Version 28.0.1500.52 Ubuntu 13.10 (28.0.1500.52-0ubuntu3) That comes from the official repos. Those using various ppa's Get them purged. Here's a short, but not total list https://launchpad.net/~chromium-daily/+archive/ppa and here's the active one https://launchpad.net/~chromium-daily/+archive/stable Regards, Phill. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1052849 Title: Chrominum out of date and has various issues not seen in Chrome Status in “chromium-browser” package in Ubuntu: Fix Released Bug description: The version of Chrominum is 18.0.1025.168 - but if I download the latest Chrome from Google it has a version of 21.0.1180.89. Chromimum will not play MP4 (even with non-free stuff installed). Chrome does. Chrominum keeps popping up an unwanted request for a password to my Gnome keyring - which I don't use and I have not asked Chrominum to save passwords. From reading on discussions on the net I understand this has been fixed in Chrome (but have not tried it long enough to tell). ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: chromium-browser 18.0.1025.168~r134367-0ubuntu0.12.04.1 ProcVersionSignature: Ubuntu 3.2.0-29.46-generic 3.2.24 Uname: Linux 3.2.0-29-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.0.1-0ubuntu12 Architecture: amd64 Date: Wed Sep 19 11:10:23 2012 Desktop-Session: DESKTOP_SESSION = gnome-fallback XDG_CONFIG_DIRS = /etc/xdg/xdg-gnome-fallback:/etc/xdg XDG_DATA_DIRS = /usr/share/gnome-fallback:/usr/share/gnome:/usr/local/share/:/usr/share/ Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None ExecutablePath: /usr/lib/chromium-browser/chromium-browser InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: chromium-browser UpgradeStatus: No upgrade log present (probably fresh install) chromium-default: CHROMIUM_FLAGS= To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1052849/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
Re: [Desktop-packages] [Bug 1133794] Re: Printer not detected by system-config-printer 1.3.11 in Lubuntu 13.04
From memory, do we not run avhi daemon as it was considered 'one more daemon lubuntu does not need to run at start up' This may be worth mentioning in the notes somewhere, but IIRC, it is not a bug. Regards, Phill. On 19 July 2013 05:39, Jonathan Marsden 1133...@bugs.launchpad.net wrote: Solution #25 (hack the config file) will not detect network printers out there on your LAN automatically, of course, which solution #23 (adding avahi-daemon) will, if they speak the avahi/bonjour protocol. Best is always subjective. My thinking is that adding avahi-daemon is the most functionally complete workaround we have. Incidentally, why is your Launchpad login so amazingly long and complex? :) It means you can't easily print up business cards with your Launchpad page URL on them, because it won't fit: https://launchpad.net/~78luphr0rnk2nuqimstywepozxn9kl19tqh0tx66b5dki1xxsh5mkz9gl21a5rlwfnr8jn6ln0m3jxne2k9x1ohg85w3jabxlrqbgszpjpwcmvkbcvq9spp6z3w5j1 -c9zcy2w6n- a811i2i3ytqlsztthjth0svbccw8inm65tmkqp9sarr553jq53in4xm1m8wn3o4rlwaer06ogwvqwv9mrqoku2x334n7di44o65qze67n1wneepmidnuwnde1rqcbp Compare that with mine: https://launchpad.net/~jmarsden Jonathan -- You received this bug notification because you are a member of Lubuntu Packages Team, which is subscribed to lubuntu-meta in Ubuntu. https://bugs.launchpad.net/bugs/1133794 Title: Printer not detected by system-config-printer 1.3.11 in Lubuntu 13.04 Status in “cups” package in Ubuntu: Fix Released Status in “lubuntu-meta” package in Ubuntu: In Progress Status in “system-config-printer” package in Ubuntu: Invalid Status in “cups” source package in Raring: Fix Committed Status in “lubuntu-meta” source package in Raring: Invalid Status in “system-config-printer” source package in Raring: Invalid Bug description: 1) Raring daily Lubuntu 13.04 i386 2) system-config-printer 1.3.11 3) I expected the printer to be detected without a cups error. The printer was not detected. 4) 1) When selecting Printer from the System Tools menu the Printers-localhost dialog box appears with the following message. 'Printing service not available. Start the service on this computer or connect to another server.' 2) After clicking the connect button once the 'Connect to CUPS server' box appears. 3) After clicking the connect button on this message box the Cups server error box appears with the following dialog. There was an error during the CUPS operation: 'failed to connect to server'. [IMPACT] As the standard installation of Lubuntu does not include avahi-daemon CUPS does not get started as the Upstart script for CUPS requires avahi-daemon to be started first. Therefore there is no printing functionality for Lubuntu users even with the printing stack being installed by default. [TESTCASE] Do a standard installation of Lubuntu and run lpstat -r in a terminal. The CUPS daemon is not running. The proposed package adds a dependency to the cups-daemon binary package pulling in avahi-daemon and so CUPS will start during boot. Check with lpstat -r in a terminal window. [Regression Potential] Low. An additional package gets installed, but this package is already well-known and work well in other Ubuntu flavors. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: system-config-printer-gnome 1.3.11+20120807-0ubuntu13 ProcVersionSignature: Ubuntu 3.8.0-7.15-generic 3.8.0 Uname: Linux 3.8.0-7-generic i686 ApportVersion: 2.8-0ubuntu4 Architecture: i386 CasperVersion: 1.330 CurrentDmesg: Date: Wed Feb 27 01:04:06 2013 ExecutablePath: /usr/share/system-config-printer/system-config-printer.py InterpreterPath: /usr/bin/python2.7 LiveMediaBuild: Lubuntu 13.04 Raring Ringtail - Alpha i386 (20130226) Lpstat: Error: command ['lpstat', '-v'] failed with exit code 1: lpstat: Transport endpoint is not connected MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. MarkForUpload: True PackageArchitecture: all Papersize: a4 ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: initrd=/ubninit file=/cdrom/preseed/username.seed boot=casper quiet splash -- persistent BOOT_IMAGE=/ubnkern SourcePackage: system-config-printer UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/04/2005 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1024.001 dmi.board.name: P4C800-E dmi.board.vendor: ASUSTeK Computer Inc. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1024.001:bd08/04/2005:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASUSTeKComputerInc.:rnP4C800
[Desktop-packages] [Bug 1184451] Re: Ubuntu 13.10 random screen freeze while Normal OS activites
I may be having this same problem but currently unsure as it seems to be tied to Skype use for me, although this might just be a coincidence - my computer is rarely heavily loaded. It was the fact that the other terminals still work that's made me this this is the same issue that I'm having. * GUI becomes non-responsive (no hovering changes, clicking, scrolling etc). * Video freezes (in Skype) * Sound and microphone continues to work normally (in Skype) * Mouse still moves (clicks don't work) * Keyboard doesn't work, except to switch terminals * Text terminals appear to work normally * Computer doesn't appear to be busy after the freeze (I didn't check CPU, but terminal is responsive and there's no disk thrashing) * Restarting lightdm has worked once, but display didn't wake-up after its next sleep - direct power-off required. * Reboot required to get PC working normally again. * Ubuntu 13.04 64-bit (3.8.0-23-generic) Does this stack up with the other experiences? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1184451 Title: Ubuntu 13.10 random screen freeze while Normal OS activites Status in “xorg-server” package in Ubuntu: Confirmed Bug description: I have recently, re-installed fresh ubuntu 13.10 distribution release. But everything worked fine. until recently i had strange problem of my display screen getting freezed randomly; but no response to either mouse/keyboard. But i want to point it out; it happens randomly and is not specific ? Other day, i had music player playing in background, but screen freezed. but my music was still running. Kindly note, i used multiple monitor setup and same issue of screen freeze also cropped up. I,am not sure, whether it is bug ? thanks for the expertise support. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1184451/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1144558] Re: Images corruption in firefox when using sna
Noticed it was Fix Released for Raring, but problem appears to remain, attached is screen shot showing corrupt image on right, and photo showing different type of corruption that fixes itself if you take a screen shot, below is my version information (13.04 64-bit after apt-get update/upgrade/reboot)... phill@phill-desktop:~$ dpkg-query --list xserver-xorg-video-intel Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-==---= ii xserver-xorg-v 2:2.21.6-0ub amd64X.Org X server -- Intel i8xx, i9x If this is caused by a different problem can you please point me in the direction of any relevant existing bug report. I get this on two different computers - in About this computer one says Intel G45/G43, the other has Intel Ironlake Mobile. ** Attachment added: Screen shot + photo https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1144558/+attachment/3730513/+files/Image%20Corruption.tar.gz -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1144558 Title: Images corruption in firefox when using sna Status in X.org xf86-video-intel: Fix Released Status in “xserver-xorg-video-intel” package in Ubuntu: Fix Released Status in “xserver-xorg-video-intel” source package in Raring: Fix Released Bug description: Since sna is in using in raring users are reporting pixmap corruptions in firefox, I see the issue on an i5 cpu. The same problem has been reported by i965 users as well ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: xserver-xorg-video-intel 2:2.21.3-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-8.17-generic 3.8.0 Uname: Linux 3.8.0-8-generic i686 .tmp.unity.support.test.0: ApportVersion: 2.9-0ubuntu2 Architecture: i386 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,snap,gnomecompat,mousepoll,place,session,resize,move,wall,grid,imgpng,vpswitch,unitymtgrabhandles,regex,animation,expo,fade,workarounds,scale,ezoom,unityshell] CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Mon Mar 4 16:00:20 2013 DistUpgraded: Fresh install DistroCodename: raring DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:040a] InstallationDate: Installed on 2010-10-09 (877 days ago) InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release i386 (20101007) MachineType: Dell Inc. Latitude E6410 MarkForUpload: True PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card PlymouthDebug: Error: [Errno 13] Permission non accordée: '/var/log/plymouth-debug.log' ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-8-generic root=UUID=555ebc11-d747-44d3-af56-5e7d17851ce3 ro quiet splash vt.handoff=7 SourcePackage: xserver-xorg-video-intel UpgradeStatus: No upgrade log present (probably fresh install) XorgConf: Section Device Identifier intel Driver intel Option Accelmethod uxa EndSection dmi.bios.date: 11/30/2011 dmi.bios.vendor: Dell Inc. dmi.bios.version: A11 dmi.board.name: 0HNGW4 dmi.board.vendor: Dell Inc. dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA11:bd11/30/2011:svnDellInc.:pnLatitudeE6410:pvr0001:rvnDellInc.:rn0HNGW4:rvr:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude E6410 dmi.product.version: 0001 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.9~daily13.03.01-0ubuntu1 version.libdrm2: libdrm2 2.4.42-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.0.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.0.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.13.2-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.3-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.6-0ubuntu3 To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1144558/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net
[Desktop-packages] [Bug 1198529] Re: Chromium PPA should be revoked.
Hi, there has been some degrees of lack of progress on Chromium within ubuntu. The guy tasked with it has made some massive steps forward. I've taken the liberty to email him directly about this bug. If you do want a daily build, he is hosting them now on his own PPA before they rapidly get added into the 'stable' release area. https://launchpad.net/~cmiller/+archive/chromium-browser-stable-daily Chad is a good guy, and was handed somewhat of a poisoned chalice. People do under-estimate the amount of work he has done and still is doing. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1198529 Title: Chromium PPA should be revoked. Status in “chromium-browser” package in Ubuntu: New Bug description: There is an official-sounding PPA called chromium-daily, * https://launchpad.net/~chromium-daily/+archive/ppa However it only has version 18 released. This is ultimately confusing to end users. Suffice it to adduce two facts, Ubuntu 13.04 ships with version 25 and the timestamp of last maintence is 14 months old at the time of this bug report. The inactive PPA should be shut down or maintained. It causes substantially more confusion than good. If no one wants to maintain it, shut it down pendining someone else picking up the job. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1198529/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1194478] Re: firefox image corruption
Is this a duplicate of 1144558? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1194478 Title: firefox image corruption Status in “firefox” package in Ubuntu: Confirmed Status in “xorg” package in Ubuntu: Confirmed Bug description: since upgrading to Ubuntu 13.10 I've a problem with image-corruption in firefox. Symptoms: 1. A loaded image is shown instead of an other loaded image (image is duplicated / replaced) [see screenshot, the icon in the top-left Meine Abos - Youtube has the Icon of IT-News ct, iX, ... and of Portal ubuntuusers.de] 2. A image is corrupted so you can't even recognize what shall be shown 2_1. The image is black either entirely... 2_2. ... or some pixels are repeated over the whole image [see attached screenshot, the icon in the top-left Meine Abos - Youtube] This happens nearly every time, when the image is scaled down by firefox. It happens less often when the image is actually in the right size. The problem can only be solved by reloading the image (preventing the cache, i.e. hitting ctrl+f5) Animated images [gif] are never corrupted. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: xserver-xorg 1:7.7+1ubuntu4 ProcVersionSignature: Ubuntu 3.9.0-4.9-generic 3.9.4 Uname: Linux 3.9.0-4-generic x86_64 NonfreeKernelModules: wl .tmp.unity.support.test.0: ApportVersion: 2.10.2-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Tue Jun 25 14:21:59 2013 DistroCodename: saucy DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1486] Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 5430/5450/5470] [1002:68e0] (rev ff) (prog-if ff) InstallationDate: Installed on 2013-06-17 (7 days ago) InstallationMedia: MachineType: Hewlett-Packard HP TouchSmart tm2 Notebook PC MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.9.0-4-generic root=UUID=6459e37c-10b9-496e-9155-61932f9a5188 ro hybridopts=ON,DIS,OFF SourcePackage: xorg UpgradeStatus: Upgraded to saucy on 2013-06-17 (7 days ago) dmi.bios.date: 07/30/2010 dmi.bios.vendor: Insyde dmi.bios.version: F.12 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1486 dmi.board.vendor: Hewlett-Packard dmi.board.version: 83.1A dmi.chassis.asset.tag: CNU0250216 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.12:bd07/30/2010:svnHewlett-Packard:pnHPTouchSmarttm2NotebookPC:pvr048920252A2000122:rvnHewlett-Packard:rn1486:rvr83.1A:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP TouchSmart tm2 Notebook PC dmi.product.version: 048920252A2000122 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.9~daily13.04.18.1~13.04-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.45-2ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.1.3-0ubuntu4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.1.3-0ubuntu4 version.xserver-xorg-core: xserver-xorg-core 2:1.13.3-0ubuntu13 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2b2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.9-0ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.8-0ubuntu1 xserver.bootTime: Tue Jun 25 13:17:27 2013 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.13.3-0ubuntu13 xserver.video_driver: intel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1194478/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 718832] Re: Creative Live! Webcam microphone disabled after suspend/reboot
This has been fixed since 13.04. ** Changed in: pulseaudio (Ubuntu) Status: New = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/718832 Title: Creative Live! Webcam microphone disabled after suspend/reboot Status in “pulseaudio” package in Ubuntu: Fix Released Bug description: Binary package hint: pulseaudio I have a Creative Technology, Ltd Live! Cam Socialize [VF0640] (from lsusb) and although the microphone works I must reselect it after putting the computer to sleep or powering-on. It's the only microphone in my configuration, my sound card has a mic but I selected Analog Stereo Output for it in the sound preferences to disable it as the system seemed to always default to that. When choosing System-Preferences-Sound and then selecting the Input tab it appears as the only option but the radio button is clear. To workaround the problem I must open these settings every time and click the radio button and it then works fine until the next sleep or power-on. ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: pulseaudio 1:0.9.22~0.9.21+stable-queue-32-g8478-0ubuntu21.1 ProcVersionSignature: Ubuntu 2.6.35-25.44-generic 2.6.35.10 Uname: Linux 2.6.35-25-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: phill 1718 F pulseaudio /dev/snd/controlC0: phill 1718 F pulseaudio Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xfe9f4000 irq 44' Mixer name : 'Intel Eaglelake HDMI' Components : 'HDA:10ec0888,104382fe,00100101 HDA:80862803,80860101,0010' Controls : 44 Simple ctrls : 23 Card1.Amixer.info: Card hw:1 'Socialize'/'Creative Labs VF0640 Live! Cam Socialize at usb-:00:1d.7-2, high speed' Mixer name : 'USB Mixer' Components : 'USB041e:4083' Controls : 2 Simple ctrls : 1 Card1.Amixer.values: Simple mixer control 'Mic',0 Capabilities: cvolume cvolume-joined cswitch cswitch-joined penum Capture channels: Mono Limits: Capture 0 - 48 Mono: Capture 48 [100%] [21.00dB] [off] CheckboxSubmission: 8f42c7155b3e5262cfd0edb5c0c42bb1 CheckboxSystem: edda5d4f616ca792bf437989cb597002 Date: Mon Feb 14 15:47:34 2011 InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100429) ProcEnviron: LANG=en_GB.utf8 SHELL=/bin/bash SourcePackage: pulseaudio dmi.bios.date: 12/10/2008 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0311 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: V-P5G45 dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0311:bd12/10/2008:svnSystemmanufacturer:pnV-P5G45:pvrSystemVersion:rvnASUSTeKComputerINC.:rnV-P5G45:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: V-P5G45 dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/718832/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1194478] Re: firefox image corruption
Also confirmed on 13.04 64-bit patched with all security and recommended updates as of today. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1194478 Title: firefox image corruption Status in “firefox” package in Ubuntu: Confirmed Status in “xorg” package in Ubuntu: Confirmed Bug description: since upgrading to Ubuntu 13.10 I've a problem with image-corruption in firefox. Symptoms: 1. A loaded image is shown instead of an other loaded image (image is duplicated / replaced) [see screenshot, the icon in the top-left Meine Abos - Youtube has the Icon of IT-News ct, iX, ... and of Portal ubuntuusers.de] 2. A image is corrupted so you can't even recognize what shall be shown 2_1. The image is black either entirely... 2_2. ... or some pixels are repeated over the whole image [see attached screenshot, the icon in the top-left Meine Abos - Youtube] This happens nearly every time, when the image is scaled down by firefox. It happens less often when the image is actually in the right size. The problem can only be solved by reloading the image (preventing the cache, i.e. hitting ctrl+f5) Animated images [gif] are never corrupted. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: xserver-xorg 1:7.7+1ubuntu4 ProcVersionSignature: Ubuntu 3.9.0-4.9-generic 3.9.4 Uname: Linux 3.9.0-4-generic x86_64 NonfreeKernelModules: wl .tmp.unity.support.test.0: ApportVersion: 2.10.2-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Tue Jun 25 14:21:59 2013 DistroCodename: saucy DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1486] Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 5430/5450/5470] [1002:68e0] (rev ff) (prog-if ff) InstallationDate: Installed on 2013-06-17 (7 days ago) InstallationMedia: MachineType: Hewlett-Packard HP TouchSmart tm2 Notebook PC MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.9.0-4-generic root=UUID=6459e37c-10b9-496e-9155-61932f9a5188 ro hybridopts=ON,DIS,OFF SourcePackage: xorg UpgradeStatus: Upgraded to saucy on 2013-06-17 (7 days ago) dmi.bios.date: 07/30/2010 dmi.bios.vendor: Insyde dmi.bios.version: F.12 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1486 dmi.board.vendor: Hewlett-Packard dmi.board.version: 83.1A dmi.chassis.asset.tag: CNU0250216 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.12:bd07/30/2010:svnHewlett-Packard:pnHPTouchSmarttm2NotebookPC:pvr048920252A2000122:rvnHewlett-Packard:rn1486:rvr83.1A:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP TouchSmart tm2 Notebook PC dmi.product.version: 048920252A2000122 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.9~daily13.04.18.1~13.04-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.45-2ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.1.3-0ubuntu4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.1.3-0ubuntu4 version.xserver-xorg-core: xserver-xorg-core 2:1.13.3-0ubuntu13 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2b2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.9-0ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.8-0ubuntu1 xserver.bootTime: Tue Jun 25 13:17:27 2013 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.13.3-0ubuntu13 xserver.video_driver: intel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1194478/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
Re: [Desktop-packages] [Bug 960408] Re: Chromium doesn't know how to handle apt:// by default is this a feature we can add
Hi, If this is technically not a bug, how was a fix released? Regards, Phill. On 6 June 2013 01:21, Saikrishna Arcot saiarcot...@gmail.com wrote: My bad; technically, this is not a bug. ** Changed in: chromium-browser (Ubuntu) Status: New = Fix Released -- You received this bug notification because you are a member of Lubuntu Packages Team, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/960408 Title: Chromium doesn't know how to handle apt:// by default is this a feature we can add Status in “chromium-browser” package in Ubuntu: Fix Released Bug description: Steps to reproduce: 1. open chromium 2. goto apps.ubuntu.com 3. select an app and click on the install button 4. you get the screenshot below which is ugly It would be nice if chromium could add apt:// and a suitable default app to open in if possible. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: chromium-browser 17.0.963.79~r125985-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-19.30-generic 3.2.11 Uname: Linux 3.2.0-19-generic x86_64 ApportVersion: 1.94.1-0ubuntu2 Architecture: amd64 Date: Tue Mar 20 17:07:13 2012 Desktop-Session: DESKTOP_SESSION = ubuntu XDG_CONFIG_DIRS = /etc/xdg/xdg-ubuntu:/etc/xdg XDG_DATA_DIRS = /usr/share/ubuntu:/usr/share/gnome:/usr/local/share/:/usr/share/ Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120228) ProcEnviron: LANGUAGE=en_GB:en TERM=xterm LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: chromium-browser UpgradeStatus: No upgrade log present (probably fresh install) chromium-default: CHROMIUM_FLAGS= To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/960408/+subscriptions -- https://wiki.ubuntu.com/phillw -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/960408 Title: Chromium doesn't know how to handle apt:// by default is this a feature we can add Status in “chromium-browser” package in Ubuntu: Fix Released Bug description: Steps to reproduce: 1. open chromium 2. goto apps.ubuntu.com 3. select an app and click on the install button 4. you get the screenshot below which is ugly It would be nice if chromium could add apt:// and a suitable default app to open in if possible. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: chromium-browser 17.0.963.79~r125985-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-19.30-generic 3.2.11 Uname: Linux 3.2.0-19-generic x86_64 ApportVersion: 1.94.1-0ubuntu2 Architecture: amd64 Date: Tue Mar 20 17:07:13 2012 Desktop-Session: DESKTOP_SESSION = ubuntu XDG_CONFIG_DIRS = /etc/xdg/xdg-ubuntu:/etc/xdg XDG_DATA_DIRS = /usr/share/ubuntu:/usr/share/gnome:/usr/local/share/:/usr/share/ Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120228) ProcEnviron: LANGUAGE=en_GB:en TERM=xterm LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: chromium-browser UpgradeStatus: No upgrade log present (probably fresh install) chromium-default: CHROMIUM_FLAGS= To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/960408/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
Re: [Desktop-packages] [Bug 1183086] [NEW] Please update to 27.0.1453.93
Crikey! I'm using a dev ppa and am only on Version 27.0.1453.6 Ubuntu Regards, Phill. On 22 May 2013 21:20, ilf 1183...@bugs.launchpad.net wrote: *** This bug is a security vulnerability *** Public security bug reported: And again a new stable release with lots of security fixes: http://googlechromereleases.blogspot.de/2013/05/stable-channel- release.html Here are the CVEs: CVE-2013-2837: Use-after-free in SVG. CVE-2013-2838: Out-of-bounds read in v8. CVE-2013-2839: Bad cast in clipboard handling. CVE-2013-2840: Use-after-free in media loader. CVE-2013-2841: Use-after-free in Pepper resource handling. CVE-2013-2842: Use-after-free in widget handling. CVE-2013-2843: Use-after-free in speech handling. CVE-2013-2844: Use-after-free in style resolution. CVE-2013-2845: Memory safety issues in Web Audio. CVE-2013-2846: Use-after-free in media loader. CVE-2013-2847: Use-after-free race condition with workers. CVE-2013-2848: Possible data extraction with XSS Auditor. CVE-2013-2849: Possible XSS with drag+drop or copy+paste. Please update and keep current. Thanks. ** Affects: chromium-browser (Ubuntu) Importance: Undecided Status: New ** Information type changed from Private Security to Public Security ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2013-2837 ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2013-2838 ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2013-2839 ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2013-2840 ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2013-2841 ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2013-2842 ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2013-2843 ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2013-2844 ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2013-2847 ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2013-2848 ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2013-2845 ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2013-2846 ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2013-2849 -- You received this bug notification because you are a member of Lubuntu Packages Team, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1183086 Title: Please update to 27.0.1453.93 Status in “chromium-browser” package in Ubuntu: New Bug description: And again a new stable release with lots of security fixes: http://googlechromereleases.blogspot.de/2013/05/stable-channel- release.html Here are the CVEs: CVE-2013-2837: Use-after-free in SVG. CVE-2013-2838: Out-of-bounds read in v8. CVE-2013-2839: Bad cast in clipboard handling. CVE-2013-2840: Use-after-free in media loader. CVE-2013-2841: Use-after-free in Pepper resource handling. CVE-2013-2842: Use-after-free in widget handling. CVE-2013-2843: Use-after-free in speech handling. CVE-2013-2844: Use-after-free in style resolution. CVE-2013-2845: Memory safety issues in Web Audio. CVE-2013-2846: Use-after-free in media loader. CVE-2013-2847: Use-after-free race condition with workers. CVE-2013-2848: Possible data extraction with XSS Auditor. CVE-2013-2849: Possible XSS with drag+drop or copy+paste. Please update and keep current. Thanks. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1183086/+subscriptions -- https://wiki.ubuntu.com/phillw -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1183086 Title: Please update to 27.0.1453.93 Status in “chromium-browser” package in Ubuntu: New Bug description: And again a new stable release with lots of security fixes: http://googlechromereleases.blogspot.de/2013/05/stable-channel- release.html Here are the CVEs: CVE-2013-2837: Use-after-free in SVG. CVE-2013-2838: Out-of-bounds read in v8. CVE-2013-2839: Bad cast in clipboard handling. CVE-2013-2840: Use-after-free in media loader. CVE-2013-2841: Use-after-free in Pepper resource handling. CVE-2013-2842: Use-after-free in widget handling. CVE-2013-2843: Use-after-free in speech handling. CVE-2013-2844: Use-after-free in style resolution. CVE-2013-2845: Memory safety issues in Web Audio. CVE-2013-2846: Use-after-free in media loader. CVE-2013-2847: Use-after-free race condition with workers. CVE-2013-2848: Possible data extraction with XSS Auditor. CVE-2013-2849: Possible XSS with drag+drop or copy+paste. Please update and keep current. Thanks. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1183086/+subscriptions -- Mailing list
Re: [Desktop-packages] [Bug 1133794] Re: Printer not detected by system-config-printer 1.3.11 in Lubuntu 13.04
As we have narrowed down the instances of when CUPS is and is not running, I've asked one of our devs to take a look at the issue when he has time as I suspect it not to be a 'printing' problem, but an installer problem. Regards, Phill. On 30 April 2013 21:25, Finog fi...@yahoo.com wrote: Ran system-config-printer 1.3.12 on fresh install of Lubuntu 13.04 amd64. system-config-printer dialog says Printing service not available. Start the service on this computer or connect to another server. Pressing connect brings up a dialog box saying CUPS server: localhost. Pressing connect here yields no joy. Running sudo start cups fixes the problem and clicking Connect gives joy. Afterwards, opening system-config-printer does not show the problem message any more. Expected that CUPS would either be running already OR that the dialog box would suggest a method for starting it. -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1133794 Title: Printer not detected by system-config-printer 1.3.11 in Lubuntu 13.04 Status in “system-config-printer” package in Ubuntu: Incomplete Bug description: 1) Raring daily Lubuntu 13.04 i386 2) system-config-printer 1.3.11 3) I expected the printer to be detected without a cups error. The printer was not detected. 4) 1) When selecting Printer from the System Tools menu the Printers-localhost dialog box appears with the following message. 'Printing service not available. Start the service on this computer or connect to another server.' 2) After clicking the connect button once the 'Connect to CUPS server' box appears. 3) After clicking the connect button on this message box the Cups server error box appears with the following dialog. There was an error during the CUPS operation: 'failed to connect to server'. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: system-config-printer-gnome 1.3.11+20120807-0ubuntu13 ProcVersionSignature: Ubuntu 3.8.0-7.15-generic 3.8.0 Uname: Linux 3.8.0-7-generic i686 ApportVersion: 2.8-0ubuntu4 Architecture: i386 CasperVersion: 1.330 CurrentDmesg: Date: Wed Feb 27 01:04:06 2013 ExecutablePath: /usr/share/system-config-printer/system-config-printer.py InterpreterPath: /usr/bin/python2.7 LiveMediaBuild: Lubuntu 13.04 Raring Ringtail - Alpha i386 (20130226) Lpstat: Error: command ['lpstat', '-v'] failed with exit code 1: lpstat: Transport endpoint is not connected MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. MarkForUpload: True PackageArchitecture: all Papersize: a4 ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: initrd=/ubninit file=/cdrom/preseed/username.seed boot=casper quiet splash -- persistent BOOT_IMAGE=/ubnkern SourcePackage: system-config-printer UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/04/2005 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1024.001 dmi.board.name: P4C800-E dmi.board.vendor: ASUSTeK Computer Inc. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1024.001:bd08/04/2005:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASUSTeKComputerInc.:rnP4C800-E:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/system-config-printer/+bug/1133794/+subscriptions -- https://wiki.ubuntu.com/phillw -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to system-config-printer in Ubuntu. https://bugs.launchpad.net/bugs/1133794 Title: Printer not detected by system-config-printer 1.3.11 in Lubuntu 13.04 Status in “system-config-printer” package in Ubuntu: Incomplete Bug description: 1) Raring daily Lubuntu 13.04 i386 2) system-config-printer 1.3.11 3) I expected the printer to be detected without a cups error. The printer was not detected. 4) 1) When selecting Printer from the System Tools menu the Printers-localhost dialog box appears with the following message. 'Printing service not available. Start the service on this computer or connect to another server.' 2) After clicking the connect button once the 'Connect to CUPS server' box appears. 3) After clicking the connect button on this message box the Cups server error box appears with the following dialog. There was an error during the CUPS operation: 'failed to connect to server'. ProblemType: Bug DistroRelease: Ubuntu 13.04
[Desktop-packages] [Bug 1080674] Re: [QEMU] Corrupted desktop screen for raring desktop installation in QEMU guest (Cirrus graphics). Affects KVM but not VBox.
cirrus boots with corrupt graphics, qxl simply uses CPU time but gives no display (as no grub menu). So, comment #39 is not an option either. I have also tried installing the newer version as per #38 (By using vga). -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cairo in Ubuntu. https://bugs.launchpad.net/bugs/1080674 Title: [QEMU] Corrupted desktop screen for raring desktop installation in QEMU guest (Cirrus graphics). Affects KVM but not VBox. Status in Cairo Graphics Library: Confirmed Status in “cairo” package in Ubuntu: Confirmed Status in “linux” package in Ubuntu: Invalid Status in “xserver-xorg-video-cirrus” package in Ubuntu: Won't Fix Bug description: The desktop screen appears corrupted after raring desktop installation. Please see attached screenshot for how it looks. Going through System settings - Appearance and selecting different wall papers does not solve the isssue. Test Steps: 1. Install Ubuntu 13.04 Raring Ringtail - Alpha i386 (20121119) 2. Reboot after the installation and log in ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: unity 6.12.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.7.0-2.8-generic 3.7.0-rc5 Uname: Linux 3.7.0-2-generic i686 .tmp.unity.support.test.1: ApportVersion: 2.6.2-0ubuntu3 Architecture: i386 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CurrentDmesg: [ 18.945219] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. Date: Mon Nov 19 12:26:26 2012 DistUpgraded: Fresh install DistroCodename: raring DistroVariant: ubuntu GraphicsCard: Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller]) Subsystem: Red Hat, Inc Device [1af4:1100] InstallationDate: Installed on 2012-11-19 (0 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha i386 (20121119) Lsusb: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: Bochs Bochs MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.7.0-2-generic root=UUID=131c13a4-8227-4946-8a1f-2aaa6043670d ro quiet splash vt.handoff=7 SourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/01/2007 dmi.bios.vendor: Bochs dmi.bios.version: Bochs dmi.chassis.type: 1 dmi.chassis.vendor: Bochs dmi.modalias: dmi:bvnBochs:bvrBochs:bd01/01/2007:svnBochs:pnBochs:pvr:cvnBochs:ct1:cvr: dmi.product.name: Bochs dmi.sys.vendor: Bochs version.compiz: compiz 1:0.9.8.4+bzr3412-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.0.0-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.4-0ubuntu1 xserver.bootTime: Mon Nov 19 12:23:11 2012 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputAT Translated Set 2 keyboard KEYBOARD, id 7 inputImExPS/2 Generic Explorer Mouse MOUSE, id 8 xserver.errors: open /dev/dri/card0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.13.0-0ubuntu7 To manage notifications about this bug go to: https://bugs.launchpad.net/cairo/+bug/1080674/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1080674] Re: [QEMU] Corrupted desktop screen for raring desktop installation in QEMU guest (Cirrus graphics). Affects KVM but not VBox.
vmvga seems the best option at current, grub screen is a bit large, but the desktop appears at a size that does not require me making the VM window full size. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cairo in Ubuntu. https://bugs.launchpad.net/bugs/1080674 Title: [QEMU] Corrupted desktop screen for raring desktop installation in QEMU guest (Cirrus graphics). Affects KVM but not VBox. Status in Cairo Graphics Library: Confirmed Status in “cairo” package in Ubuntu: Confirmed Status in “linux” package in Ubuntu: Invalid Status in “xserver-xorg-video-cirrus” package in Ubuntu: Won't Fix Bug description: The desktop screen appears corrupted after raring desktop installation. Please see attached screenshot for how it looks. Going through System settings - Appearance and selecting different wall papers does not solve the isssue. Test Steps: 1. Install Ubuntu 13.04 Raring Ringtail - Alpha i386 (20121119) 2. Reboot after the installation and log in ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: unity 6.12.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.7.0-2.8-generic 3.7.0-rc5 Uname: Linux 3.7.0-2-generic i686 .tmp.unity.support.test.1: ApportVersion: 2.6.2-0ubuntu3 Architecture: i386 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CurrentDmesg: [ 18.945219] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. Date: Mon Nov 19 12:26:26 2012 DistUpgraded: Fresh install DistroCodename: raring DistroVariant: ubuntu GraphicsCard: Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller]) Subsystem: Red Hat, Inc Device [1af4:1100] InstallationDate: Installed on 2012-11-19 (0 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha i386 (20121119) Lsusb: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: Bochs Bochs MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.7.0-2-generic root=UUID=131c13a4-8227-4946-8a1f-2aaa6043670d ro quiet splash vt.handoff=7 SourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/01/2007 dmi.bios.vendor: Bochs dmi.bios.version: Bochs dmi.chassis.type: 1 dmi.chassis.vendor: Bochs dmi.modalias: dmi:bvnBochs:bvrBochs:bd01/01/2007:svnBochs:pnBochs:pvr:cvnBochs:ct1:cvr: dmi.product.name: Bochs dmi.sys.vendor: Bochs version.compiz: compiz 1:0.9.8.4+bzr3412-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.0.0-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.4-0ubuntu1 xserver.bootTime: Mon Nov 19 12:23:11 2012 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputAT Translated Set 2 keyboard KEYBOARD, id 7 inputImExPS/2 Generic Explorer Mouse MOUSE, id 8 xserver.errors: open /dev/dri/card0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.13.0-0ubuntu7 To manage notifications about this bug go to: https://bugs.launchpad.net/cairo/+bug/1080674/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
Re: [Desktop-packages] [Bug 1080674] Re: [QEMU] Corrupted desktop screen for raring desktop installation in QEMU guest (Cirrus graphics). Affects KVM but not VBox.
progress? On 5 April 2013 00:15, Launchpad Bug Tracker 1080...@bugs.launchpad.netwrote: ** Branch linked: lp:ubuntu/raring-proposed/xserver-xorg-video- modesetting -- You received this bug notification because you are subscribed to a duplicate bug report (1088692). https://bugs.launchpad.net/bugs/1080674 Title: [QEMU] Corrupted desktop screen for raring desktop installation in QEMU guest (Cirrus graphics). Affects KVM but not VBox. Status in Cairo Graphics Library: Confirmed Status in “cairo” package in Ubuntu: Confirmed Status in “linux” package in Ubuntu: Invalid Status in “xserver-xorg-video-cirrus” package in Ubuntu: Won't Fix Bug description: The desktop screen appears corrupted after raring desktop installation. Please see attached screenshot for how it looks. Going through System settings - Appearance and selecting different wall papers does not solve the isssue. Test Steps: 1. Install Ubuntu 13.04 Raring Ringtail - Alpha i386 (20121119) 2. Reboot after the installation and log in ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: unity 6.12.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.7.0-2.8-generic 3.7.0-rc5 Uname: Linux 3.7.0-2-generic i686 .tmp.unity.support.test.1: ApportVersion: 2.6.2-0ubuntu3 Architecture: i386 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CurrentDmesg: [ 18.945219] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. Date: Mon Nov 19 12:26:26 2012 DistUpgraded: Fresh install DistroCodename: raring DistroVariant: ubuntu GraphicsCard: Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller]) Subsystem: Red Hat, Inc Device [1af4:1100] InstallationDate: Installed on 2012-11-19 (0 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha i386 (20121119) Lsusb: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: Bochs Bochs MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.7.0-2-generic root=UUID=131c13a4-8227-4946-8a1f-2aaa6043670d ro quiet splash vt.handoff=7 SourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/01/2007 dmi.bios.vendor: Bochs dmi.bios.version: Bochs dmi.chassis.type: 1 dmi.chassis.vendor: Bochs dmi.modalias: dmi:bvnBochs:bvrBochs:bd01/01/2007:svnBochs:pnBochs:pvr:cvnBochs:ct1:cvr: dmi.product.name: Bochs dmi.sys.vendor: Bochs version.compiz: compiz 1:0.9.8.4+bzr3412-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.0.0-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.4-0ubuntu1 xserver.bootTime: Mon Nov 19 12:23:11 2012 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputAT Translated Set 2 keyboard KEYBOARD, id 7 inputImExPS/2 Generic Explorer Mouse MOUSE, id 8 xserver.errors: open /dev/dri/card0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.13.0-0ubuntu7 To manage notifications about this bug go to: https://bugs.launchpad.net/cairo/+bug/1080674/+subscriptions -- https://wiki.ubuntu.com/phillw -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cairo in Ubuntu. https://bugs.launchpad.net/bugs/1080674 Title: [QEMU] Corrupted desktop screen for raring desktop installation in QEMU guest (Cirrus graphics). Affects KVM but not VBox. Status in Cairo Graphics Library: Confirmed Status in “cairo” package in Ubuntu: Confirmed Status in “linux” package in Ubuntu: Invalid Status in “xserver-xorg-video-cirrus” package in Ubuntu: Won't Fix Bug description: The desktop screen appears corrupted after raring desktop installation. Please see attached screenshot for how it looks. Going through System settings - Appearance and selecting different wall papers does not solve the isssue. Test Steps: 1. Install Ubuntu 13.04 Raring Ringtail - Alpha i386 (20121119) 2. Reboot after the installation and log in ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: unity 6.12.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.7.0-2.8-generic 3.7.0-rc5 Uname: Linux 3.7.0-2-generic i686 .tmp.unity.support.test.1: ApportVersion: 2.6.2-0ubuntu3 Architecture:
[Desktop-packages] [Bug 1096603] Re: Chromium reports It's dead Jim on Low RAM machines
** Attachment added: Screen Shot at start of test https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1096603/+attachment/3479432/+files/2013-01-08-181040_1024x768_scrot.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1096603 Title: Chromium reports It's dead Jim on Low RAM machines Status in “chromium-browser” package in Ubuntu: Confirmed Bug description: When running certain tabs, chromium browser eventually reports the above error. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: chromium-browser 22.0.1229.94~r161065-0ubuntu1 ProcVersionSignature: Ubuntu 3.5.0-21.32-generic 3.5.7.1 Uname: Linux 3.5.0-21-generic x86_64 ApportVersion: 2.6.1-0ubuntu9 Architecture: amd64 Date: Sun Jan 6 15:09:12 2013 Desktop-Session: DESKTOP_SESSION = Lubuntu XDG_CONFIG_DIRS = /etc/xdg/lubuntu/:/etc/xdg/xdg-Lubuntu:/etc/xdg XDG_DATA_DIRS = /etc/xdg/lubuntu:/usr/share/Lubuntu:/usr/local/share/:/usr/share/:/usr/share:/usr/share/gdm:/var/lib/menu-xdg DiskUsage: b'Filesystem Type Size Used Avail Use% Mounted on\n/dev/vda1 ext4 9.4G 2.6G 6.4G 29% /\nudev devtmpfs 237M 4.0K 237M 1% /dev\ntmpfs tmpfs 99M 712K 98M 1% /run\nnone tmpfs 5.0M 0 5.0M 0% /run/lock\nnone tmpfs 246M 132K 246M 1% /run/shm\nnone tmpfs 100M 8.0K 100M 1% /run/user\n' Inodes: b'Filesystem Inodes IUsed IFree IUse% Mounted on\n/dev/vda1608K 139K 470K 23% /\nudev 60K 425 59K1% /dev\ntmpfs 62K 330 62K1% /run\nnone 62K 3 62K1% /run/lock\nnone 62K 4 62K1% /run/shm\nnone 62K 9 62K1% /run/user\n' Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None ExecutablePath: /usr/lib/chromium-browser/chromium-browser InstallationDate: Installed on 2013-01-04 (1 days ago) InstallationMedia: Lubuntu 12.10 Quantal Quetzal - Release amd64 (20121017) MarkForUpload: True ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: chromium-browser UpgradeStatus: No upgrade log present (probably fresh install) chromium-default: CHROMIUM_FLAGS= gconf-keys: /desktop/gnome/applications/browser/exec = b''/desktop/gnome/url-handlers/https/command = b''/desktop/gnome/url-handlers/https/enabled = b''/desktop/gnome/url-handlers/http/command = b''/desktop/gnome/url-handlers/http/enabled = b''/desktop/gnome/session/required_components/windowmanager = b''/apps/metacity/general/compositing_manager = b''/desktop/gnome/interface/icon_theme = b''/desktop/gnome/interface/gtk_theme = b'' To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1096603/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1096603] Re: Chromium reports It's dead Jim on Low RAM machines
** Attachment added: After 22 hours running https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1096603/+attachment/3479434/+files/2013-01-09-161746_1024x768_scrot.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1096603 Title: Chromium reports It's dead Jim on Low RAM machines Status in “chromium-browser” package in Ubuntu: Confirmed Bug description: When running certain tabs, chromium browser eventually reports the above error. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: chromium-browser 22.0.1229.94~r161065-0ubuntu1 ProcVersionSignature: Ubuntu 3.5.0-21.32-generic 3.5.7.1 Uname: Linux 3.5.0-21-generic x86_64 ApportVersion: 2.6.1-0ubuntu9 Architecture: amd64 Date: Sun Jan 6 15:09:12 2013 Desktop-Session: DESKTOP_SESSION = Lubuntu XDG_CONFIG_DIRS = /etc/xdg/lubuntu/:/etc/xdg/xdg-Lubuntu:/etc/xdg XDG_DATA_DIRS = /etc/xdg/lubuntu:/usr/share/Lubuntu:/usr/local/share/:/usr/share/:/usr/share:/usr/share/gdm:/var/lib/menu-xdg DiskUsage: b'Filesystem Type Size Used Avail Use% Mounted on\n/dev/vda1 ext4 9.4G 2.6G 6.4G 29% /\nudev devtmpfs 237M 4.0K 237M 1% /dev\ntmpfs tmpfs 99M 712K 98M 1% /run\nnone tmpfs 5.0M 0 5.0M 0% /run/lock\nnone tmpfs 246M 132K 246M 1% /run/shm\nnone tmpfs 100M 8.0K 100M 1% /run/user\n' Inodes: b'Filesystem Inodes IUsed IFree IUse% Mounted on\n/dev/vda1608K 139K 470K 23% /\nudev 60K 425 59K1% /dev\ntmpfs 62K 330 62K1% /run\nnone 62K 3 62K1% /run/lock\nnone 62K 4 62K1% /run/shm\nnone 62K 9 62K1% /run/user\n' Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None ExecutablePath: /usr/lib/chromium-browser/chromium-browser InstallationDate: Installed on 2013-01-04 (1 days ago) InstallationMedia: Lubuntu 12.10 Quantal Quetzal - Release amd64 (20121017) MarkForUpload: True ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: chromium-browser UpgradeStatus: No upgrade log present (probably fresh install) chromium-default: CHROMIUM_FLAGS= gconf-keys: /desktop/gnome/applications/browser/exec = b''/desktop/gnome/url-handlers/https/command = b''/desktop/gnome/url-handlers/https/enabled = b''/desktop/gnome/url-handlers/http/command = b''/desktop/gnome/url-handlers/http/enabled = b''/desktop/gnome/session/required_components/windowmanager = b''/apps/metacity/general/compositing_manager = b''/desktop/gnome/interface/icon_theme = b''/desktop/gnome/interface/gtk_theme = b'' To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1096603/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1096603] Re: Chromium reports It's dead Jim on Low RAM machines
** Attachment added: Screenshot after approx 5 hours running https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1096603/+attachment/3479433/+files/2013-01-08-225900_1024x768_scrot.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1096603 Title: Chromium reports It's dead Jim on Low RAM machines Status in “chromium-browser” package in Ubuntu: Confirmed Bug description: When running certain tabs, chromium browser eventually reports the above error. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: chromium-browser 22.0.1229.94~r161065-0ubuntu1 ProcVersionSignature: Ubuntu 3.5.0-21.32-generic 3.5.7.1 Uname: Linux 3.5.0-21-generic x86_64 ApportVersion: 2.6.1-0ubuntu9 Architecture: amd64 Date: Sun Jan 6 15:09:12 2013 Desktop-Session: DESKTOP_SESSION = Lubuntu XDG_CONFIG_DIRS = /etc/xdg/lubuntu/:/etc/xdg/xdg-Lubuntu:/etc/xdg XDG_DATA_DIRS = /etc/xdg/lubuntu:/usr/share/Lubuntu:/usr/local/share/:/usr/share/:/usr/share:/usr/share/gdm:/var/lib/menu-xdg DiskUsage: b'Filesystem Type Size Used Avail Use% Mounted on\n/dev/vda1 ext4 9.4G 2.6G 6.4G 29% /\nudev devtmpfs 237M 4.0K 237M 1% /dev\ntmpfs tmpfs 99M 712K 98M 1% /run\nnone tmpfs 5.0M 0 5.0M 0% /run/lock\nnone tmpfs 246M 132K 246M 1% /run/shm\nnone tmpfs 100M 8.0K 100M 1% /run/user\n' Inodes: b'Filesystem Inodes IUsed IFree IUse% Mounted on\n/dev/vda1608K 139K 470K 23% /\nudev 60K 425 59K1% /dev\ntmpfs 62K 330 62K1% /run\nnone 62K 3 62K1% /run/lock\nnone 62K 4 62K1% /run/shm\nnone 62K 9 62K1% /run/user\n' Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None ExecutablePath: /usr/lib/chromium-browser/chromium-browser InstallationDate: Installed on 2013-01-04 (1 days ago) InstallationMedia: Lubuntu 12.10 Quantal Quetzal - Release amd64 (20121017) MarkForUpload: True ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: chromium-browser UpgradeStatus: No upgrade log present (probably fresh install) chromium-default: CHROMIUM_FLAGS= gconf-keys: /desktop/gnome/applications/browser/exec = b''/desktop/gnome/url-handlers/https/command = b''/desktop/gnome/url-handlers/https/enabled = b''/desktop/gnome/url-handlers/http/command = b''/desktop/gnome/url-handlers/http/enabled = b''/desktop/gnome/session/required_components/windowmanager = b''/apps/metacity/general/compositing_manager = b''/desktop/gnome/interface/icon_theme = b''/desktop/gnome/interface/gtk_theme = b'' To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1096603/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1096603] Re: Chromium reports It's dead Jim on Low RAM machines
Hi Chad, please find the details I garnered using the memory-redirect ** Attachment added: dmesg of system https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1096603/+attachment/3479436/+files/dmesg1.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1096603 Title: Chromium reports It's dead Jim on Low RAM machines Status in “chromium-browser” package in Ubuntu: Confirmed Bug description: When running certain tabs, chromium browser eventually reports the above error. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: chromium-browser 22.0.1229.94~r161065-0ubuntu1 ProcVersionSignature: Ubuntu 3.5.0-21.32-generic 3.5.7.1 Uname: Linux 3.5.0-21-generic x86_64 ApportVersion: 2.6.1-0ubuntu9 Architecture: amd64 Date: Sun Jan 6 15:09:12 2013 Desktop-Session: DESKTOP_SESSION = Lubuntu XDG_CONFIG_DIRS = /etc/xdg/lubuntu/:/etc/xdg/xdg-Lubuntu:/etc/xdg XDG_DATA_DIRS = /etc/xdg/lubuntu:/usr/share/Lubuntu:/usr/local/share/:/usr/share/:/usr/share:/usr/share/gdm:/var/lib/menu-xdg DiskUsage: b'Filesystem Type Size Used Avail Use% Mounted on\n/dev/vda1 ext4 9.4G 2.6G 6.4G 29% /\nudev devtmpfs 237M 4.0K 237M 1% /dev\ntmpfs tmpfs 99M 712K 98M 1% /run\nnone tmpfs 5.0M 0 5.0M 0% /run/lock\nnone tmpfs 246M 132K 246M 1% /run/shm\nnone tmpfs 100M 8.0K 100M 1% /run/user\n' Inodes: b'Filesystem Inodes IUsed IFree IUse% Mounted on\n/dev/vda1608K 139K 470K 23% /\nudev 60K 425 59K1% /dev\ntmpfs 62K 330 62K1% /run\nnone 62K 3 62K1% /run/lock\nnone 62K 4 62K1% /run/shm\nnone 62K 9 62K1% /run/user\n' Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None ExecutablePath: /usr/lib/chromium-browser/chromium-browser InstallationDate: Installed on 2013-01-04 (1 days ago) InstallationMedia: Lubuntu 12.10 Quantal Quetzal - Release amd64 (20121017) MarkForUpload: True ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: chromium-browser UpgradeStatus: No upgrade log present (probably fresh install) chromium-default: CHROMIUM_FLAGS= gconf-keys: /desktop/gnome/applications/browser/exec = b''/desktop/gnome/url-handlers/https/command = b''/desktop/gnome/url-handlers/https/enabled = b''/desktop/gnome/url-handlers/http/command = b''/desktop/gnome/url-handlers/http/enabled = b''/desktop/gnome/session/required_components/windowmanager = b''/apps/metacity/general/compositing_manager = b''/desktop/gnome/interface/icon_theme = b''/desktop/gnome/interface/gtk_theme = b'' To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1096603/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1096603] Re: Chromium reports It's dead Jim on Low RAM machines
** Attachment added: It's dead Jim https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1096603/+attachment/3479435/+files/2013-01-10-082417_1024x768_scrot.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1096603 Title: Chromium reports It's dead Jim on Low RAM machines Status in “chromium-browser” package in Ubuntu: Confirmed Bug description: When running certain tabs, chromium browser eventually reports the above error. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: chromium-browser 22.0.1229.94~r161065-0ubuntu1 ProcVersionSignature: Ubuntu 3.5.0-21.32-generic 3.5.7.1 Uname: Linux 3.5.0-21-generic x86_64 ApportVersion: 2.6.1-0ubuntu9 Architecture: amd64 Date: Sun Jan 6 15:09:12 2013 Desktop-Session: DESKTOP_SESSION = Lubuntu XDG_CONFIG_DIRS = /etc/xdg/lubuntu/:/etc/xdg/xdg-Lubuntu:/etc/xdg XDG_DATA_DIRS = /etc/xdg/lubuntu:/usr/share/Lubuntu:/usr/local/share/:/usr/share/:/usr/share:/usr/share/gdm:/var/lib/menu-xdg DiskUsage: b'Filesystem Type Size Used Avail Use% Mounted on\n/dev/vda1 ext4 9.4G 2.6G 6.4G 29% /\nudev devtmpfs 237M 4.0K 237M 1% /dev\ntmpfs tmpfs 99M 712K 98M 1% /run\nnone tmpfs 5.0M 0 5.0M 0% /run/lock\nnone tmpfs 246M 132K 246M 1% /run/shm\nnone tmpfs 100M 8.0K 100M 1% /run/user\n' Inodes: b'Filesystem Inodes IUsed IFree IUse% Mounted on\n/dev/vda1608K 139K 470K 23% /\nudev 60K 425 59K1% /dev\ntmpfs 62K 330 62K1% /run\nnone 62K 3 62K1% /run/lock\nnone 62K 4 62K1% /run/shm\nnone 62K 9 62K1% /run/user\n' Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None ExecutablePath: /usr/lib/chromium-browser/chromium-browser InstallationDate: Installed on 2013-01-04 (1 days ago) InstallationMedia: Lubuntu 12.10 Quantal Quetzal - Release amd64 (20121017) MarkForUpload: True ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: chromium-browser UpgradeStatus: No upgrade log present (probably fresh install) chromium-default: CHROMIUM_FLAGS= gconf-keys: /desktop/gnome/applications/browser/exec = b''/desktop/gnome/url-handlers/https/command = b''/desktop/gnome/url-handlers/https/enabled = b''/desktop/gnome/url-handlers/http/command = b''/desktop/gnome/url-handlers/http/enabled = b''/desktop/gnome/session/required_components/windowmanager = b''/apps/metacity/general/compositing_manager = b''/desktop/gnome/interface/icon_theme = b''/desktop/gnome/interface/gtk_theme = b'' To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1096603/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1096603] Re: Chromium reports It's dead Jim on Low RAM machines
VM restarted, with the chromium://memory-redirect http://bbc.co.uk/news tabs open. I've taken a screen shot of it at the start, and will just leave it to run. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1096603 Title: Chromium reports It's dead Jim on Low RAM machines Status in “chromium-browser” package in Ubuntu: Confirmed Bug description: When running certain tabs, chromium browser eventually reports the above error. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: chromium-browser 22.0.1229.94~r161065-0ubuntu1 ProcVersionSignature: Ubuntu 3.5.0-21.32-generic 3.5.7.1 Uname: Linux 3.5.0-21-generic x86_64 ApportVersion: 2.6.1-0ubuntu9 Architecture: amd64 Date: Sun Jan 6 15:09:12 2013 Desktop-Session: DESKTOP_SESSION = Lubuntu XDG_CONFIG_DIRS = /etc/xdg/lubuntu/:/etc/xdg/xdg-Lubuntu:/etc/xdg XDG_DATA_DIRS = /etc/xdg/lubuntu:/usr/share/Lubuntu:/usr/local/share/:/usr/share/:/usr/share:/usr/share/gdm:/var/lib/menu-xdg DiskUsage: b'Filesystem Type Size Used Avail Use% Mounted on\n/dev/vda1 ext4 9.4G 2.6G 6.4G 29% /\nudev devtmpfs 237M 4.0K 237M 1% /dev\ntmpfs tmpfs 99M 712K 98M 1% /run\nnone tmpfs 5.0M 0 5.0M 0% /run/lock\nnone tmpfs 246M 132K 246M 1% /run/shm\nnone tmpfs 100M 8.0K 100M 1% /run/user\n' Inodes: b'Filesystem Inodes IUsed IFree IUse% Mounted on\n/dev/vda1608K 139K 470K 23% /\nudev 60K 425 59K1% /dev\ntmpfs 62K 330 62K1% /run\nnone 62K 3 62K1% /run/lock\nnone 62K 4 62K1% /run/shm\nnone 62K 9 62K1% /run/user\n' Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None ExecutablePath: /usr/lib/chromium-browser/chromium-browser InstallationDate: Installed on 2013-01-04 (1 days ago) InstallationMedia: Lubuntu 12.10 Quantal Quetzal - Release amd64 (20121017) MarkForUpload: True ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: chromium-browser UpgradeStatus: No upgrade log present (probably fresh install) chromium-default: CHROMIUM_FLAGS= gconf-keys: /desktop/gnome/applications/browser/exec = b''/desktop/gnome/url-handlers/https/command = b''/desktop/gnome/url-handlers/https/enabled = b''/desktop/gnome/url-handlers/http/command = b''/desktop/gnome/url-handlers/http/enabled = b''/desktop/gnome/session/required_components/windowmanager = b''/apps/metacity/general/compositing_manager = b''/desktop/gnome/interface/icon_theme = b''/desktop/gnome/interface/gtk_theme = b'' To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1096603/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp