Hi Maheshika,
Please upload hazelcast 3.2.6.wso2v2 to nexus. The pull request[1] has been
merged.
[1] - https://github.com/wso2/orbit/pull/32
Regards,
Nira
On Tue, Oct 28, 2014 at 9:15 PM, Niranjan Karunanandham niran...@wso2.com
wrote:
Hi Azeez,
On Tue, Oct 28, 2014 at 6:34 PM, Afkham
Hi Niranjan
Done.
On Tue, Nov 4, 2014 at 2:57 PM, Niranjan Karunanandham niran...@wso2.com
wrote:
Hi Maheshika,
Please upload hazelcast 3.2.6.wso2v2 to nexus. The pull request[1] has
been merged.
[1] - https://github.com/wso2/orbit/pull/32
Regards,
Nira
On Tue, Oct 28, 2014 at 9:15
Hi Buddhi,
Could you extract the jar and see whether the folder structure is as
expected. Also in the screenhot attached I see a menu as Fraud Detection
with the exact icon that you have specified in the component.xml file.
Other than that seems you have properly configured.
Thanks,
Malithi.
On
Hi,
I tried this scenario again and it worked. I think there would have been a
network issue earlier (as I tested it at home).
For example : I created a user and enrolled an android device using the
username and emailed password, in WiFi_1. Then disconnected from WiFi_1 and
connected to WiFi_2,
Hi All,
In Enterprise Store Publisher side,when creating a new asset under a type,
is the enter key mapped to create functionality?
I created a new asset type, and in add asset page, (
http://localhost:9763/publisher/asts/asset type/create)for some other
functionality I was going to map enter
Hi malithi,
that menu appears as Fraud detection, in the menu is a test project that i
created by removing Resources.properties file and manually entering the
values. i forgot to remove it before i captured this. apologies for that
and yes i had extract the jar and nothing wrong inside that.
Congratulations Niranjan...
*Jayanga Dissanayake*
Senior Software Engineer
WSO2 Inc. - http://wso2.com/
lean . enterprise . middleware
email: jaya...@wso2.com
mobile: +94772207259
On Tue, Nov 4, 2014 at 12:35 PM, Isuruwan Herath isuru...@wso2.com wrote:
Congratulations !!!
On Tue, Nov 4,
Congrats Niranjan!!!
On Tue, Nov 4, 2014 at 4:00 PM, Shiroshica Kulatilake sh...@wso2.com
wrote:
Congrats !!
On Tue, Nov 4, 2014 at 3:51 PM, Jayanga Dissanayake jaya...@wso2.com
wrote:
Congratulations Niranjan...
*Jayanga Dissanayake*
Senior Software Engineer
WSO2 Inc. -
Congratulations Niranjan!
On Tue, Nov 4, 2014 at 4:04 PM, Suhan Dharmasuriya suh...@wso2.com wrote:
Congrats Niranjan!!!
On Tue, Nov 4, 2014 at 4:00 PM, Shiroshica Kulatilake sh...@wso2.com
wrote:
Congrats !!
On Tue, Nov 4, 2014 at 3:51 PM, Jayanga Dissanayake jaya...@wso2.com
wrote:
Congratulations Niranjan ...
On Tue, Nov 4, 2014 at 4:08 PM, Harsha Kumara hars...@wso2.com wrote:
Congratulations Niranjan!
On Tue, Nov 4, 2014 at 4:04 PM, Suhan Dharmasuriya suh...@wso2.com
wrote:
Congrats Niranjan!!!
On Tue, Nov 4, 2014 at 4:00 PM, Shiroshica Kulatilake sh...@wso2.com
Congratulations Niranjan
On Tue, Nov 4, 2014 at 4:14 PM, Srisunmugaraja Paraparan parapa...@wso2.com
wrote:
Congratulations Niranjan ...
On Tue, Nov 4, 2014 at 4:08 PM, Harsha Kumara hars...@wso2.com wrote:
Congratulations Niranjan!
On Tue, Nov 4, 2014 at 4:04 PM, Suhan Dharmasuriya
Congratulations Niranjan...!!!
On Tue, Nov 4, 2014 at 4:22 PM, Nipuni Perera nip...@wso2.com wrote:
Congratulations Niranjan
On Tue, Nov 4, 2014 at 4:14 PM, Srisunmugaraja Paraparan
parapa...@wso2.com wrote:
Congratulations Niranjan ...
On Tue, Nov 4, 2014 at 4:08 PM, Harsha Kumara
Hi Madhawa,
As per the offline chat, to solve your problem you can simply concatenate
the receiving email addresses related to each event.
*Eg:*
*@email - *a...@gmail.com, b...@yahoo.com, c...@hotmail.com
Event formatter email address - *@**email*
On Thu, Oct 30, 2014 at 1:03 AM, Madhawa
Congrats Niranjan ..
On Tue, Nov 4, 2014 at 4:26 PM, Mahesh Chinthaka mahe...@wso2.com wrote:
Congratulations Niranjan...!!!
On Tue, Nov 4, 2014 at 4:22 PM, Nipuni Perera nip...@wso2.com wrote:
Congratulations Niranjan
On Tue, Nov 4, 2014 at 4:14 PM, Srisunmugaraja Paraparan
Congratulations Niranjan!
On Tue, Nov 4, 2014 at 4:35 PM, Milinda Perera milin...@wso2.com wrote:
Congrats Niranjan ..
On Tue, Nov 4, 2014 at 4:26 PM, Mahesh Chinthaka mahe...@wso2.com wrote:
Congratulations Niranjan...!!!
On Tue, Nov 4, 2014 at 4:22 PM, Nipuni Perera nip...@wso2.com
Congrats
On Tue, Nov 4, 2014 at 4:35 PM, Milinda Perera milin...@wso2.com wrote:
Congrats Niranjan ..
On Tue, Nov 4, 2014 at 4:26 PM, Mahesh Chinthaka mahe...@wso2.com wrote:
Congratulations Niranjan...!!!
On Tue, Nov 4, 2014 at 4:22 PM, Nipuni Perera nip...@wso2.com wrote:
Congrats Niranjan..!!
*Kasun de Silva*
Software Engineer | *WSO2 Inc.*; http://wso2.com
lean.enterprise.middleware
email : kas...@wso2.com
mobile : +94 77 794 4260
On Tue, Nov 4, 2014 at 4:38 PM, Pulasthi Supun pulas...@wso2.com wrote:
Congrats
On Tue, Nov 4, 2014 at 4:35
Congratulations Nira...!
*Dakshika Jayathilaka*
Software Engineer
WSO2, Inc.
lean.enterprise.middleware
0771100911
On Tue, Nov 4, 2014 at 4:44 PM, Kasun De Silva kas...@wso2.com wrote:
Congrats Niranjan..!!
*Kasun de Silva*
Software Engineer | *WSO2 Inc.*; http://wso2.com
Congrats Niranjan
On Tue, Nov 4, 2014 at 4:50 PM, Dakshika Jayathilaka daksh...@wso2.com
wrote:
Congratulations Nira...!
*Dakshika Jayathilaka*
Software Engineer
WSO2, Inc.
lean.enterprise.middleware
0771100911
On Tue, Nov 4, 2014 at 4:44 PM, Kasun De Silva kas...@wso2.com wrote:
Congratulations Niranjan...
Keep up the good work.
*Dilan U. Ariyaratne*
Software Engineer
WSO2 Inc. http://wso2.com/
Mobile: +94775149066
lean . enterprise . middleware
On Tue, Nov 4, 2014 at 4:58 PM, Shashika Karunatilaka shashi...@wso2.com
wrote:
Congrats Niranjan
On Tue, Nov 4, 2014 at
Hi,,
Please commit attached patch for JIRA[1]
[1] : https://wso2.org/jira/browse/APIMANAGER-3024
--
Thanks
Abimaran Kugathasan
Software Engineer | WSO2 Inc
Data APIs Technologies Team
Mobile : +94 773922820
http://stackoverflow.com/users/515034
http://lk.linkedin.com/in/abimaran
Congratulations !!!
On Tue, Nov 4, 2014 at 11:43 AM, Sameera Perera samee...@wso2.com wrote:
Hi all,
It's my pleasure to announce Niranjan as a WSO2 Committer. He has been
an active contributor for WSO2 Enterprise Mobility Manager.
Niranjan, welcome aboard and keep up the good work!.
Hi All,
When Integrating APIM cluster with BAM I noticed that statistics should be
enabled in all gateway nodes and in all publisher and store nodes (*They
have to be pointed to the Thrift server*). AFAIK data is published to BAM
by the Gateway nodes. And store and publisher fetches data from the
There's no need for the Publisher and Store to point to the thrift Server.
But you need to enabled stats for the graphs to work.
Thanks,
NuwanD.
On Tue, Nov 4, 2014 at 6:11 PM, Yasassri Ratnayake yasas...@wso2.com
wrote:
Hi All,
When Integrating APIM cluster with BAM I noticed that
Hi Asanka,
If I understood your requirement correctly, you can try this out.
In your code, figure out a way to access the xml based or json based custom
error response that you generate, so that you can easily assign that value
to an OMNode or a JSONObject.
Once that is done, using the way we
Hi Lahiru,
AFAIK, serializeSpecificMediator() is the method that gets called when we
are reading the relevant configuration xml for a specific mediator from the
esb configuration file
and input that to the mediate() function of the mediator to do the
corresponding processing.
Cheers.
*Dilan U.
Yes it used to work with AM-1.7.0 and is 5.0.0
Why do we need that separate config element in identity. Xml now for AM-1.8.0!??
Can anyone explains why??
--
Thanks Regards,
Rajakrishna Reddy
--- Original Message ---
From: Nuwan Dias nuw...@wso2.com
Sent: 29 October 2014 20:40
To:
Hi Dunith,
We have deployed the BAM setup using puppet scripts and observed some
issues which related to the puppet scripts and docs, those were already
reported as jira's.
Additionally we have observed followings when executing puppet scripts.
*Issue 1* - Failed in in the first time and
Hi all,
As per the offline discussions with team, I'm moving undeploy functionality
from appfactory.core to appfactory.deployers
In fact I'm moving the functionality in
*undeployAllArtifactsOfAppFromDepSyncGitRepo* method in
*org.wso2.carbon.appfactory.core.deploy.ApplicationDeployer* class to
Hi,
Thanks for the replies. I was able to get error message removing JsonObject
element using following enrich mediator block.
enrich
source clone=true xpath=$body//jsonObject//error/
target type=body/
/enrich
On Tue, Nov 4, 2014 at 5:07 AM, Dilan Udara
Hi Dunith
within the puppet scrips for receive/analyzer nodes hive-site.xml are we to
change the user name/password and host values
property
namehive.incremental.processing.intermediate.results.cassandra.hosts/name
valuelocalhost:9160/value
/property
property
Hi all ,
I was trying to move the exact functionality in
*org.wso2.carbon.appfactory.core.deploy.ApplicationDeployer.undeployAllArtifactsOfAppFromDepSyncGitRepo()*
to
*org.wso2.carbon.appfactory.deployers.AbstractDeployer.unDeployArtifact()*
while working on *unDeployArtifact()* i need to access
Hi Mahesh,
On Tue, Nov 4, 2014 at 9:42 PM, Mahesh Chinthaka mahe...@wso2.com wrote:
Hi all ,
I was trying to move the exact functionality in
*org.wso2.carbon.appfactory.core.deploy.ApplicationDeployer.undeployAllArtifactsOfAppFromDepSyncGitRepo()*
to
Kind reminder on this.
Thanks.
/Gayashan
On Thu, Sep 11, 2014 at 11:37 AM, Gayashan Amarasinghe gayas...@wso2.com
wrote:
Hi Asela/IS team,
Can you send pull request for [1] for carbon4-kernel. It would require
applying fix for [2] as well. If some API changes were avoided when
applying
Hi all,
I have created automation test class [1], for the jira reported at [2].
This scenario is fixed and can be easily tested manually and verify the fix.
However when running this test scenario using automation test class at [1]
management console notifications are not generated.
Further
Hi Janaka,
As Mahesh mentioned some of here are Util methods as private.
@Mahesh
getGitRepoUrlForTenant - rename this method to getRepoUrlForTenant and move
it to RepositoryClient interface. Implement it in GitRepositoryClient
according to the Git.
getServerDeploymentPaths - in this method,
Hi Harsha,
On Tue, Nov 4, 2014 at 10:03 PM, Harsha Thirimanna hars...@wso2.com wrote:
Hi Janaka,
As Mahesh mentioned some of here are Util methods as private.
Agreed. But to add the artifact to the git repo, we need the same
parameters right? Then there is a way that we pass those parameters
sorry, I had sent half of the mail.
getFilesToDelete - you can move this method to AbstractStratosDeployer
getRepositoryProviderAdminUser
getRepositoryProviderAdminPassword
these two methods can move to AppFactoryUtil in common component and make
it public.
*Harsha Thirimanna*
Senior
Hi Janaka,
There are no new utility method. Just keep it in right place as we can
reuse it.
*Harsha Thirimanna*
Senior Software Engineer; WSO2, Inc.; http://wso2.com
* http://www.apache.org/*
*email: **hars...@wso2.com* az...@wso2.com* cell: +94 71 5186770 , +94 *
*774617784twitter:
+1 to move them to AppfactoryUtil. So we can use it every where.
Thanks Regards
Danushka Fernando
Software Engineer
WSO2 inc. http://wso2.com/
Mobile : +94716332729
On Tue, Nov 4, 2014 at 10:13 PM, Harsha Thirimanna hars...@wso2.com wrote:
Hi Janaka,
There are no new utility method. Just
Hi Harsha,
Why cant we just make those methods public and use them ? Since
appfactory.core is already a dependancy in appfactory.deployers
So we can avoid writing the same code twice.
On Tue, Nov 4, 2014 at 10:13 PM, Harsha Thirimanna hars...@wso2.com wrote:
Hi Janaka,
There are no new
Hi Mahesh,
Don't write same code twice. Just move it. Because it is not suite to use
those kind of method that keeping this Service Class. When we are doing
some changes, we may have to re-factor according to the best practices.
WDYT ?
*Harsha Thirimanna*
Senior Software Engineer; WSO2, Inc.;
Hi Devs,
I think we need to update PPaaS public JIRA with the features that we are
planning to deliver in 4.1.0 release. WDYT?
Thanks
--
*Imesh Gunaratne*
Technical Lead
WSO2 Inc: http://wso2.com
T: +94 11 214 5345 M: +94 77 374 2057
W: http://imesh.gunaratne.org
Lean . Enterprise . Middleware
What should go there? PaaS features are covered by Apache Stratos. Only we
need to update with Cartridges. (Docker and puppet based)
On Tue, Nov 4, 2014 at 10:33 PM, Imesh Gunaratne im...@wso2.com wrote:
Hi Devs,
I think we need to update PPaaS public JIRA with the features that we are
Hi Aparna,
Issue 1 - Failed in in the first time and succeeded in the 2nd attempt.
Puppet script uses wget command to fetch Cassandra distribution from the
specified remote location. This operation might take some time depending on
the network. Above situation could happen if the Cassandra
+1 for refactoring.
@Mahesh : These are good reads. Read these if you are not familiar to
refactoring.
[1] http://sourcemaking.com/refactoring/bad-smells-in-code
[2] http://sourcemaking.com/refactoring/duplicated-code
Thanks Regards
Danushka Fernando
Software Engineer
WSO2 inc.
Hi Harsha,
While following other codes i was able to figure out some usages and below
is what im going to do. Let me know if anything wrong.
*getRepositoryProviderAdminPassword()*
*getRepositoryProviderAdminUser()*
These two can be solved. We can
use DeployerUtil.getRepositoryProviderProperty
+1 to move them to correct Util classes and refactor accordingly. It would
make ApplicationDeployer more cleaner and we could use those utility in
other places as we needed.
On Tue, Nov 4, 2014 at 10:21 PM, Harsha Thirimanna hars...@wso2.com wrote:
Hi Mahesh,
Don't write same code twice. Just
Hi Mahesh,
On Tue, Nov 4, 2014 at 10:51 PM, Mahesh Chinthaka mahe...@wso2.com wrote:
Hi Harsha,
While following other codes i was able to figure out some usages and below
is what im going to do. Let me know if anything wrong.
*getRepositoryProviderAdminPassword()*
Hi all,
I'm working on automating the OpenID to SAML federation flow. At the moment
OpenID implementation on IS 5.1.0 depends on the session, which would be
fixed in future. Hence when I start two IS instances with the same hostname
changing only the port the OpenID federation flow breaks since
Hi Janaka,
We initially decided to implement unDeployArtifact() in AbstractDeployer,
now it seems better to implement it in AbstractStratosDeployer.
+1 to implement it in AbstractStratosDeployer.
@Harsha,
WDYT ?
On Tue, Nov 4, 2014 at 11:00 PM, Janaka Ranabahu jan...@wso2.com wrote:
Hi Mahesh,
Yes +1. Finally I wanted to tell, we should move to the correct place :)
*Harsha Thirimanna*
Senior Software Engineer; WSO2, Inc.; http://wso2.com
* http://www.apache.org/*
*email: **hars...@wso2.com* az...@wso2.com* cell: +94 71 5186770 , +94 *
*774617784twitter: **http://twitter.com/
Hi Shavantha,
You'll only need above configurations when incremental processing is
enabled. However you don't need to edit those values by hand, instead
puppet should automatically configure it for you.
Please raise a JIRA for this. Will fix it.
Regards,
Dunith
On Tue, Nov 4, 2014 at 10:40
On Tue, Nov 4, 2014 at 11:06 PM, Mahesh Chinthaka mahe...@wso2.com wrote:
Hi Janaka,
We initially decided to implement unDeployArtifact() in AbstractDeployer,
now it seems better to implement it in AbstractStratosDeployer.
+1 to implement it in AbstractStratosDeployer.
+1 for implementing it
Hi,
Thanks everyone, I will proceed.
On Tue, Nov 4, 2014 at 11:11 PM, Janaka Ranabahu jan...@wso2.com wrote:
On Tue, Nov 4, 2014 at 11:06 PM, Mahesh Chinthaka mahe...@wso2.com
wrote:
Hi Janaka,
We initially decided to implement unDeployArtifact() in AbstractDeployer,
now it seems better
Hi,
Following were discussed during the G-reg Redmine Issue review.
Notes on G-reg store (ES store integration to G-reg):
1.Adding RXTs
As of now, adding a new RXT, does not make them appear in store, for that
we need to add an entry about the rxt in a configuration file.
In the meeting it was
@Mahesh
IIRC you cannot use RepositoryManager.getAppRepositoryURL() instead of
getGitRepoUrlForTenant() since it is used get GIT repo url and what we need
here is S2Git repo url. As Janaka has suggested
AbstractStratosDeployer.generateRepoUrl()
could be used. Please check.
On Tue, Nov 4, 2014 at
Hi Samith,
Thanks , will check and do.
On Tue, Nov 4, 2014 at 11:16 PM, Samith Dassanayake sam...@wso2.com wrote:
@Mahesh
IIRC you cannot use RepositoryManager.getAppRepositoryURL() instead of
getGitRepoUrlForTenant() since it is used get GIT repo url and what we
need here is S2Git repo url.
Hi DimuthuD,
Can you check what is going wrong. Please check backend management console
subscription tests first. You can access to management console while
running the tests and verify whether notifications are present.
Thanks,
Krishantha.
On Tue, Nov 4, 2014 at 10:00 PM, Sameera Kannangara
Hi All,
Status Update - end of 04/11/2014
OVERALL COVERAGE SUMMARY
nameline, %block, %method, %class, %all classes36% (21808.8/59853)
34% (85996/251321)46% (4210/9189)57% (605/1070)OVERALL STATS SUMMARY
total packages:276total executable files:921total classes:1070total methods:
9189total
Hi Nuwan,
Is there a way to disable thrift configurations in Publisher and Store? If
I do not specify valid thrift URL or Port after enabling statistics the
server throws the following error, indicating that publisher/store is
trying to connect to the thrift server.
ERROR - AsyncDataPublisher
Hi,
In order to save the repetition, we can have ONE job-configuraitons
inbuilt. Idea is, if an app type is added without a job this job
configuration is taken as the default. We have to pick the most generic one
in this case. I believe the interpreter language building would be the most
generic
Hi Dilan,
Isn't it createSpecificMediator() that is called to create a mediator from
configuration file?
I searched in the synapse source for usages of createSpecificMediator() and
found that serializeSpecificMediator() is used in deployers mostly for
restoring the XML in error conditions.
Hi Rajakrishna,
The above configuration indicates that the SAML2 SSO SAML Response must be
signed using the authenticated user's tenant keystore. Please refer to the
comments made in [1]
[1] - https://wso2.org/jira/browse/STORE-454
With Regards,
On Tue, Nov 4, 2014 at 6:55 PM, Rajakrishna
Hi ESB team,
I did the following steps and end up loosing the date inside target of
iterate mediator
1. Add new sequence with Iterate mediator
2. In Target set a endpoint (Address endpoint)
Now you can see the source view as something like following
iterate
I run into this error intermittently.. Is there a solution for this..
java.lang.ClassNotFoundException:
org.wso2.carbon.tomcat.ext.servlet.DelegationServlet
at
org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1718)
at
Hi Lahiru,
Thanks for helping me to solve this problem.
Best Regards.
Madhawa
On Tue, Nov 4, 2014 at 4:26 PM, Lahiru Cooray lahi...@wso2.com wrote:
Hi Madhawa,
As per the offline chat, to solve your problem you can simply concatenate
the receiving email addresses related to each event.
Congrats Niranjan :)
On Tue, Nov 4, 2014 at 6:02 PM, Vijitha Ekanayake vijit...@wso2.com wrote:
Congratulations !!!
On Tue, Nov 4, 2014 at 11:43 AM, Sameera Perera samee...@wso2.com wrote:
Hi all,
It's my pleasure to announce Niranjan as a WSO2 Committer. He has been
an active
If it worked for APIM 1.7.0 and IS 5.0.0 with tenant users, APIM 1.8.0
should also work same way..
On Wed, Nov 5, 2014 at 9:00 AM, Yasassri Ratnayake yasas...@wso2.com
wrote:
Hi Rajakrishna,
The above configuration indicates that the SAML2 SSO SAML Response must be
signed using the
Hi all,
Using the above method we can send emails to multiple email addresses using
output email adapter. Still what is the best way to manage a dynamic email
list to be used with email output adapter? In our case we need to maintain
a subscription list. Currently we are using a separate database
Correction.. I get this with a Carbon 4.3.0-SNAPSHOT based product.. I have
ldap, carbon remote user management features and jaggery features installed
in it.
On Wed, Nov 5, 2014 at 9:26 AM, Lochana Menikarachchi loch...@wso2.com
wrote:
I run into this error intermittently.. Is there a
Hi Lochana,
This is a known issue and we'll be fixing it. For the time being please
restart the server once you encounter this.
Can I get a full list of features you have installed in your server?
Gayashan Amarasinghe
(sent from mobile)
On 5 Nov 2014 09:49, Lochana Menikarachchi
If you mean to have a default one +1. Which means that someone can deploy
an apptype without a build configuration. So I will vote for maven
configuration in that case. WDYT
On Nov 5, 2014 8:28 AM, Dimuthu Leelarathne dimut...@wso2.com wrote:
Hi,
In order to save the repetition, we can have
Hi CD,
To manage the subscribers list, i think of course you need to maintain a
database.
Could you please share the ER diagram or table structure of the existing db.
On Wed, Nov 5, 2014 at 9:45 AM, CD Athuraliya chathur...@wso2.com wrote:
Hi all,
Using the above method we can send emails to
Hi Krishantha,
I Will look into this.
Regards
On Tue, Nov 4, 2014 at 11:22 PM, Krishantha Samaraweera krishan...@wso2.com
wrote:
Hi DimuthuD,
Can you check what is going wrong. Please check backend management console
subscription tests first. You can access to management console while
On Wed, Nov 5, 2014 at 9:49 AM, Lochana Menikarachchi loch...@wso2.com
wrote:
Correction.. I get this with a Carbon 4.3.0-SNAPSHOT based product.. I
have ldap, carbon remote user management features and jaggery features
installed in it.
This is a known issue in 4.3.0. I think the jaggery
Hi All,
It would be great if the following issues can be fixed before we build the
next APIM pack.
[1] - https://wso2.org/jira/browse/APIMANAGER-3042
[2] - https://wso2.org/jira/browse/APIMANAGER-2116
[3] - https://wso2.org/jira/browse/APIMANAGER-3022
[4] -
Hi All,
I have just setup the latest AF pack. Observed the following exception
while creating the tenant. Any clue ?
TID: [0] [Carbon] [2014-11-05 11:23:48,185] ERROR
{org.wso2.carbon.identity.authenticator.signedjwt.SignedJWTAuthenticator} -
Authentication Request is rejected. User does not
Hi all,
Following up on MQTT integration to MB 3.0.0, we need to add a few samples
promoting some strong use cases for MQTT with MB.
Some use cases we have in mind are :
- IOT related - publish device state via MQTT to MB
- Mock Publishing state of several sensors in vehicles to
Hi all,
Currently following jars are included for MB code coverage generation. Is
there any updates required for jar list ?
org.wso2.carbon.andes_
org.wso2.carbon.andes.core_
org.wso2.carbon.andes.admin_
org.wso2.carbon.andes.commons_
org.wso2.carbon.andes.cluster.mgt_
Hi Dharshana,
When I removed the property, while trying to login from my tenant, it gave
me an error page and returned the following exception at Publisher console.
I was able to login from my tenants *only* when I used this parameter in
identity.xml. I'm using API-M 1.8.0 nightly pack with IS
Hi Dunith
I have reported the following two puppet related jira for now
https://wso2.org/jira/browse/BAM-1861
https://wso2.org/jira/browse/BAM-1862
will update the other issues and update this mail thread
Shavantha Weerasinghe
Senior Software Engineer QA
WSO2, Inc.
lean.enterprise.middleware.
Hi Malithi,
To overcome session cookie problem pls look at[1].
[1]
http://warunaperera.blogspot.com/2014/06/enablingsso-for-wso2-servers-overcome.html
On Tue, Nov 4, 2014 at 11:06 PM, Malithi Edirisinghe malit...@wso2.com
wrote:
Hi all,
I'm working on automating the OpenID to SAML
Hi Samith,
Please commit the attached patch for JIRA [1]
[1]
https://wso2.org/jira/browse/APPFAC-2580
*https://wso2.org/jira/browse/APPFAC-2630
https://wso2.org/jira/browse/APPFAC-2630*
Thanks,
Roshan Deniyage
Associate Technical Lead
WSO2, Inc: http://wso2.com
Mobile: +94
Done.
Thanks,
Samith
On Wed, Nov 5, 2014 at 11:53 AM, Roshan Deniyage rosh...@wso2.com wrote:
Hi Samith,
Please commit the attached patch for JIRA [1]
[1]
https://wso2.org/jira/browse/APPFAC-2580
*https://wso2.org/jira/browse/APPFAC-2630
https://wso2.org/jira/browse/APPFAC-2630*
Could we do any Analytics use case with Integration with
BAM(2.5.0)/CEP(3.1.0)?
On Wed, Nov 5, 2014 at 11:41 AM, Akalanka Pagoda Arachchi
darsha...@wso2.com wrote:
Hi all,
Following up on MQTT integration to MB 3.0.0, we need to add a few samples
promoting some strong use cases for MQTT
Hi Waruna,
The problem is changing the etc/hosts in automation tests. I don't think
it's recommended when writing integrations tests.
Hope there would be some better solution for this.
Thanks,
Malithi.
On Wed, Nov 5, 2014 at 11:49 AM, Waruna Perera waru...@wso2.com wrote:
Hi Malithi,
To
+1
It would be valuable to have Analytics use cases. Will come up with one.
Thanks
On Wed, Nov 5, 2014 at 11:56 AM, Iranga Muthuthanthri ira...@wso2.com
wrote:
Could we do any Analytics use case with Integration with
BAM(2.5.0)/CEP(3.1.0)?
On Wed, Nov 5, 2014 at 11:41 AM, Akalanka Pagoda
Installing org.wso2.carbon.ldap.server.feature.group 4.3.0.SNAPSHOT.
Installing org.wso2.carbon.ldap.server.server.feature.group 4.3.0.SNAPSHOT.
Installing org.wso2.carbon.directory.service.mgr.feature.group
4.3.0.SNAPSHOT.
Installing org.wso2.carbon.directory.service.mgr.server.feature.group
Thanks Lochana.
On Wed, Nov 5, 2014 at 12:09 PM, Lochana Menikarachchi loch...@wso2.com
wrote:
Installing org.wso2.carbon.ldap.server.feature.group 4.3.0.SNAPSHOT.
Installing org.wso2.carbon.ldap.server.server.feature.group 4.3.0.SNAPSHOT.
Installing
Hi Devs,
In appfactory sql statement for runtime database operations are in the
SQLConstants and this is fine. But, the column names which are used by
some methods are hard coded. Better to move those to a constant file.
I'm going to rename the SQLConstants file to SQLQueryConstans and put
the
Congratz !
On Wed, Nov 5, 2014 at 9:37 AM, Sam Sivayogam s...@wso2.com wrote:
Congrats Niranjan :)
On Tue, Nov 4, 2014 at 6:02 PM, Vijitha Ekanayake vijit...@wso2.com
wrote:
Congratulations !!!
On Tue, Nov 4, 2014 at 11:43 AM, Sameera Perera samee...@wso2.com
wrote:
Hi all,
It's
changes done to the two nodes
*hive-site.xml*
property
namehadoop.embedded.local.mode.debug/name
valuefalse/value
/property
property
namehive.incremental.processing.intermediate.results.cassandra.hosts/name
value*192.168.48.33:9160 http://192.168.48.33:9160*/value
/property
Why is taskServerCount=1? ..
Cheers,
Anjana.
On Tue, Nov 4, 2014 at 11:15 PM, Shavantha Weerasinghe shavan...@wso2.com
wrote:
changes done to the two nodes
*hive-site.xml*
property
namehadoop.embedded.local.mode.debug/name
valuefalse/value
/property
property
No Anjana, taskServerCount=2.
Regards,
Aparna
On Wed, Nov 5, 2014 at 12:49 PM, Anjana Fernando anj...@wso2.com wrote:
Why is taskServerCount=1? ..
Cheers,
Anjana.
On Tue, Nov 4, 2014 at 11:15 PM, Shavantha Weerasinghe shavan...@wso2.com
wrote:
changes done to the two nodes
OK.
Cheers,
Anjana.
On Tue, Nov 4, 2014 at 11:27 PM, Aparna Karunarathna apa...@wso2.com
wrote:
No Anjana, taskServerCount=2.
Regards,
Aparna
On Wed, Nov 5, 2014 at 12:49 PM, Anjana Fernando anj...@wso2.com wrote:
Why is taskServerCount=1? ..
Cheers,
Anjana.
On Tue, Nov 4, 2014 at
In which call exactly this occurs? In which server do you see this error?
AF or someother server?
Thanks Regards
Danushka Fernando
Software Engineer
WSO2 inc. http://wso2.com/
Mobile : +94716332729
On Wed, Nov 5, 2014 at 11:40 AM, Kasun De Silva kas...@wso2.com wrote:
Hi All,
I have just
Congratulations Niranjan !
On Wed, Nov 5, 2014 at 12:30 PM, Chan duli...@wso2.com wrote:
Congratz !
On Wed, Nov 5, 2014 at 9:37 AM, Sam Sivayogam s...@wso2.com wrote:
Congrats Niranjan :)
On Tue, Nov 4, 2014 at 6:02 PM, Vijitha Ekanayake vijit...@wso2.com
wrote:
Congratulations !!!
I am working on this jira[1]. As per the offline discussion with Amani, I
have to break the hive script to individual scripts to address follow
analytic logics
org_wso2_apimgt_statistics_destination
org_wso2_apimgt_statistics_request
org_wso2_apimgt_statistics_response
99 matches
Mail list logo