19lee79 wrote:
> Ok, i just power on my pCP player but when i try going to my music on
> the USB drive, it wouldn't it say "To enable My Music try the followings
> I even clicked on autostart in the browser but when i start my player
> again later that night, it did the same thing wouldn't
There is a setting in LMS under the playertab where you can select if
it only plays the single trac or the whole album.
[image:
https://forums.slimdevices.com/blob:https://forums.slimdevices.com/5461c79e-e425-460f-95ee-4eccc20f6ab4]
piCorePlayer a small player for the Raspberry Pi in RAM.
*Angelcardm:*I suppose. But if it's supposed to work by connecting to a
laptop, I'd like to see that work.
I still Think that attaching a screen in order to debug your issue would
be the first and most simple step to follow. It will give you a lot of
information, and you would know immediately
Hi.
I Will suggest that you start by adding a computer screen to
yourraspberry.
That will allow you to follow the boot process, and in the end the
correct IP address will be shown also you will be able to see if
piCorePlayer is running correctly.
piCorePlayer a small player for the Raspberry
Man in a van wrote:
> Just rechecking this now, with a 4gb card. I can only resize the whole
> card. I'm sure there used to be an option to only partially resize the
> partition :confused::o:(
Hi we haven't removed the option to select predefined sizes - see here:
Guut_Boy wrote:
> I have an old RPi lying around on which I was thinking of installing
> piCorePlayer and use as a small inexpensive headphone listening station.
> However, I heard that the jack on the RPi is not very good to use with
> headphones (in this case I would probably be using a pair
kidstypike wrote:
> You'll need to check that the HiFiBerry DAC is usable with this setup,
> as it uses the 40 pin block that seems to be already in use (circled
> white).
>
> Also will the white ribbon cable bend out of the way? (red arrow)
Hi.
If you attached it the other way around you
pkfox wrote:
> I do indeed
Hi.
There are several DAC options for you to choose from - also it depends
whether you want optical out, analog out or an integrated amplifier.
http://www.iqaudio.co.uk/
pkfox wrote:
> Thanks Ralphy is there such an instructable to build a complete player -
> from software installation to plugging it in ?
If you want to try piCorePlayer it really is very simple. Burn the
sd-card with the piCorePlayer image, then boot and you will have a
working solution out of
Pascal Hibon wrote:
> Thanks for the detailed explanation Ralphy!
> I'm not a Linux expert but with the above I should be able to manage.
>
> Question: is the vu image still the same resolution as the original
> Touch? I have jstraw's images and I could just replace the Logitech ones
> but I'm
Pascal Hibon wrote:
> As others have mentioned, stick with SB's (in some form or another, such
> as RPI's, Wandboard's, etc). The Squeezebox is system is light years
> ahead of other streamer technology, even today. It has unmatched user
> experience which is priceless. I have tried Sonos in the
philippe_44 wrote:
With Ralphy building JiveLite for piCorePlayer
http://forums.slimdevices.com/showthread.php?103330-Jivelite-for-piCorePlayerp=811820viewfull=1#post811820,
I was wondering if some would be interested by a 3D printable enclosure
that would integrate an raspi A+, touchscreen
Hi jimzak
nice picture.
I was wondering if it is possible to Control the squeeze player via the
touch screen?
steen
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://sites.google.com/site/picoreplayer/home
*Please 'donate'
pippin wrote:
I have seen the same complaint by users who want to register on the
forum. That doesn't seem to be possible right now.
Yep, also piCorePlayer users complain that they can't register at this
forum anymore.
So Michael could you have a look at this?
Regards
Steen
piCorePlayer
Thanks for the updated version 2.0.15.
I haven't had any problems with the new version everything is fine.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://sites.google.com/site/picoreplayer/home
*Please 'donate'
SamS wrote:
Perfect! Is this still the best thread to ask about recommendations for
which Pi version/case/etc.?
Hi, just a word of caution, the wolfson card is not currently supported
by piCorePlayer.
I hope that it will be, but I have found it difficult to add support for
it in the newest
Hi I have a few questions about the new GUI.
Where can I find the now playing screen?
where can I find the playlist, and how do I remove a song from the list?
steen
piCorePlayer a small player for the Raspberry Pi (25MB in RAM).
Homepage: https://sites.google.com/site/picoreplayer/home and
Hi.
As you already stated, the raspberry can output I2S-data.
There are two players build on raspberry and Triodes great Squeezelite
player which might fit your needs:
The piCorePlayer - a dedicated squeezebox player that transform the
raspberry to something like a Squeezebox Duet.
or
The
Hi Thomas - I just tried the dropbox link a few post above - and it is
still working fine.
Steen
piCorePlayer a small player for the Raspberry Pi (25MB in RAM).
Homepage: https://sites.google.com/site/picoreplayer/home and
discussion:
Hi thanks for the update, and i already got som minor bug fixes. Many of
the crashes have been dealt with, and for me it is now working better
than ever. The server connection is much faster than before.
piCorePlayer a small player for the Raspberry Pi (25MB in RAM).
Homepage:
Hi if you try the piCorePlayer on your raspberry I have seen reports
that you will be able to get 96/24 audio out of the HDMI (192/24
produces noise)
Look here:
OK
My last suggestions.
The Squeeze Audio Device
14650
Or as requested by Jackof All
The Community Squeeze
14651
I like the name Squeeze Audio Device the best.
This name clearly states what we are talking about, and there is links
back to both companies that made our previous players
Hi
Maybe something like this for the different versions of the wandboard
devices:
14647
The colours and the font could be different - but this logo clearly
states the version of the Squeeze Device
+---+
|Filename: Squeeze2.jpg
Thanks to pperse I found the correct fonts for my suggestion, and as he
suggested it might also be better with the original colours.
The thinking behind these logos (and names) are that they resemble the
style from the SlimDevice logo, without being too similar and at the
same time it
pperse wrote:
How about a more simplified logo like this?
14625
Hi I like these the most.
But maybe the name reflect our legacy from both the Slim devices and the
Logitech Squeezebox - So I thought that Squeeze Devices or Squeeze
Device could be a good candidate:
14643
Steen
JackOfAll wrote:
At some point I was thinking that we would make a very cut down (just a
player) image based on something like the Microcore Linux that the guys
are using with their Picoplayer image on Rasp Pi. I think that's running
from a ramfs with save config back to sdcard/cf partition.
I have been following your development with interest.
If possible I would like to beta-test your Gen1 when available.
I'm not a linux-guru and have only recently started using linux. But I
have managed to hack a small dedicated player for the raspberry board
based on microcore linux and
Hi
Sorry for this question, but I just updated to LMS 7.8, and needed to
change some settings, and it ask for a restart of the server - but I
simply can't recall how I restart the server from the web pages?
Therefore, I have been rebooting the computer everytime - but there must
be a smarted
Thank you.
I thought that it was possible from within the server web-pages, but
your solution is working fine.
Somehow I seem to remember that it should be possible from the server
pages, but as I haven't found the button to press here - I'm having
doubt about my memory
Thanks, what a relief, off course that is the explanation, I have
previously been using lms on a whs (windows home server) computer.
So my memory is almost ok :-)
sbp's Profile:
Hi
I think I have discovered a bug.
If you connect to a server without any connected player, you are asked
if you want to associate a player from another server to the new server.
This is very good, however, if you answer yes to that question you
change the association for all the players and
A poll associated with this post was created, to vote and see the
results, please visit http://forums.slimdevices.com/showthread.php?t=98255
Question:
I really also would like to be independent on mysqueezebox.com for
listening to radio stations. So I hope it will be possible to make a
TuneIn plugin that allows us to do that.
I have seen that also MediaPortal has a TuneIn plugin - maybe something
could be learned from their source code?
Hi.
I'm using wimp, and here there is no problem playing different songs on
different players, so I'm not sure that it is not possible in the future
to have a similar feature.
sbp's Profile:
I have been following this thread with interest. I don't know if you are
familiar with the microcore linux, but maybe you should consider it for
the basis of the new player.
Microcore linux is a small linux (basis is only 8-12 MB), but it is
possible to add the packages that you need. It is so
Hi
I just updated to the new version today (preview 1.4.0 -20130116-1120)-
but now there is a problem:
If you are at the artist page and want to play an album, you often get
the album below the one you want to hear:
If you have a long press on the cover picture - you always get the album
Hi I have the same problem as Castalla. The newest version worked fine a
few times (I really don't remember if it only worked one time).
But now it wont connect to the server, it seems to be connected, there
is no wheel turning and if I look at the switch server setting it says
it is connected.
Hi just tried the new version, still the same problem, that Orange does
not restart wifi, if the smartphone was been idle for some time.
It is a Samsung galaxy I9100 with Android 4.0.4. what happens is that
the wifi symbol disapears from top ribbon on the Android - you know the
place where you
db122 wrote:
Thanks for the report!
Do you happen to recall if you noticed this problem in 1.2.9 as well, or
if it was introduced in the preview releases?
Yes, I just tried version 1.2.9 and I have the same problem.
Hi I'm using the latest 1.30 version, and I really like it.
BUT I have one problem, if my android has gone sleeping while I'm using
Orange to control my Duet (I don't use my android as a player) then it
often can't start the Wifi up. I continues showing the round circle. I
need to turn off wifi
I see the same. That is numbers instead of the alphabet in scrolling on
a samsung SII 9100 Android 4.04
sbp's Profile: http://forums.slimdevices.com/member.php?userid=37237
View this thread:
psketch wrote:
Hi Ralphy
Any chance of a build of Squeezeplay for RaspberryPi? I'm happily
running your build of squeezeslave on the Pi - it's running great, but
I'd love to give Squeezeplay a try.
Hi psketch
If you read a few responses above (post no 4) in this tread, you will
see that
Hi I was wondering if it would be possible for us to copy/maintain the
list of streaming internet radio stations currently available through
mysqueezebox.com?
Somehow it should be possible, as we can add URLs of radio stations we
wan't to listen to. Also LMS has the opportunity to use OPML
garym wrote:
Already done in many free places on web (e.g., tunein.com).
edit: and note that creating our own OPML file would be a file that
contains hundreds of thousands of station URLs.
I know that there are places with thousands of URL's like tunein.com,
but can you use this service
ralphy wrote:
Search these forums, it's been discussed many times in the past.
Clue: squeezeslave only supports 44100Hz sample rate.
Sorry I have read about that, but I thought that something else was the
problem (maybe some special danish letters etc) I didn't know how to
actually check
Thank you very much.
It is working fine on windows 7.
I have noticed that you recently have build many different versions of
SqueezePlay, so I was wondering if you are planning to make an ARM build
as well?
The reason for my asking is, that I have bought a Raspberry board, and I
will try to
Hi Ralphy
Thank you very much for the Squeezeslave, it is working very well for
me, and it even can be synchronised with My Duet and Radio. All my local
music files are playing fine and most of the radio stations. But it
seems like all my Danish Radio stations can't play via Squeezeslave.
Here
Hi the problem is solved in version 1.2.9 ,
Thanks
sbp's Profile: http://forums.slimdevices.com/member.php?userid=37237
View this thread: http://forums.slimdevices.com/showthread.php?t=92330
kidstypike wrote:
Motorola Defy +
Auto updated to version 1.2.8, takes ages to open, can't get past Server
Discovery. Try to enter IP address for a specific sever, crashes.
Hi I have the exact same problem with the new version 1.2.8. Takes very
long time to open, feels sluggish, can't
Hi
I'm using the latest version1.2.7, on a Samsung i9100 with Android ICS.
I like it very much but have a few problems and suggestions:
1. When the Samsung goes into some kind of power saving mode, I have
difficulties using Orange Squeeze again after waking the phone. I think
the problem is
castalla wrote:
The only DR programmes I can get are the regional P4 stations (eg.
Esbjerg)
None of the national P1-4 work.
Hi this is exactly what I see.
Also all other radio stations are working, I mean from other countries.
So I think that the Danish radio has changed their links.
I have investigated this a bit more, as it seemed strange that some of
us could connect and others could not.
I looked at this page
http://www.dr.dk/hjaelp/DR%20Netradio/20111020145139.htm
and here I'm able to connect to the windows media streams, whereas the
mp3 and AAC streams are not working.
Ok
I have also contacted DR, so hopefully they will solve it.
Steen
sbp's Profile: http://forums.slimdevices.com/member.php?userid=37237
View this thread: http://forums.slimdevices.com/showthread.php?t=94484
Hi
Now all my Danish Channels are playing again - so something has changed,
probably at the Danish Radio web-pages.
Is the problem also solved for you who had issues before?
sbp's Profile:
Hi
Suddenly I can't listen to the danish radio stations any more. It
writes something about a 404 error and I haven't touched anything..
I use LMS 7.7.1 and I'm not connected to Mysqueezebox.com.
Am I the only one which have problems with the danish radiostations
(DR)?
And how do I fix it?
Just updated my Samsung SII 9100 to Android Ice cream sandwich - and
then the old apk did not function any more.
However, the new one you linked to is fine.
--
sbp
sbp's Profile: http://forums.slimdevices.com/member.php
be used for adding Grooveshark support to
Squeezebox as well.
Regards
The link to the Mediaportal plugin:
http://forum.team-mediaportal.com/mediaportal-plugins-47/rockstar-beta-1-0-2-ultimate-online-music-plugin-spotify-grooveshark-88585/
--
sbp
57 matches
Mail list logo
