Given the interest in using FooSQ in a variety of different set-ups, I'm
going to make a version that is fully configurable through the editing
of a simple text file.
These are the parameters I have now:
[parameters]
SqueezeBoxServerIP=127.0.0.1
SqueezeBoxServerCLIPort=9090
stuffedspacedog;615794 Wrote:
Given the interest in using FooSQ in a variety of different set-ups, I'm
going to make a version that is fully configurable through the editing
of a simple text file.
These are the parameters I have now:
[parameters]
SqueezeBoxServerIP=127.0.0.1
You use the shortcut to launch Foobar, if there is no error message it
has successfully connected to the SqueezeBox Server. Start playing
some music, see what happens.
--
stuffedspacedog
stuffedspacedog's Profile:
If your Vortexbox has an IP address which is configured by DHCP then
it's possible that it may change over time. I'd advise you to set a
fixed IP address in your Vortexbox otherwise my script has no idea
which machine to connect to.
--
stuffedspacedog
paulster;615788 Wrote:
I think the truth is 7.5.3 is actually the problem, not the plugins.
For instance we've already established definitively that the FAAD AAC
conversion executable shipped with 7.5.3 causes a processor race.
Looks like 7.5.3 really is the problem, because I had a lockup
Hola! Here's the updated fully configurable version.
There are some under the hood changes for greater stability.
This version now loads FB2K from within the script.
Unzip the file and place both FooSQ.exe and FooSQ.ini in your
Foobar2000 directory.
FooSQ is now fully configurable with a
Ditto - Did something break in the API into Radioio?
--
ZeddZull
ZeddZull's Profile: http://forums.slimdevices.com/member.php?userid=7678
View this thread: http://forums.slimdevices.com/showthread.php?t=86097
I listen to 3 or 4 AVRO stations all the time. Sunday morning (USA
Time) in particular.
Today, Sunday morning, I see that most, if not all AVRO offerings are
ICY 401...service unavailable
Looks like a RNW Classic or Radio Swiss Classic morning for me.
Anyone confirm?
--
Squeezed_Rotel
John
Yup, it's broke. ;)
--
toby10
toby10's Profile: http://forums.slimdevices.com/member.php?userid=12553
View this thread: http://forums.slimdevices.com/showthread.php?t=86105
toby10;615822 Wrote:
Yup, it's broke. ;)
Thanks Toby for confirming.
--
Squeezed_Rotel
John M
SqueezeCenter 7.3.4 running on a DIY PC, Windows 7 64 bit o.s., with
Inguz Audio EQ/DRC. (1) Transporter, (4) Booms connected through a
Linksys WRT54gs router and Linksys WAP54g access point.
I do not have a RadioIO Premium account, but same here. None will play
from the RadioIO App.
But most will play from the generic listing Internet Radio Music
Internet Only RadioIO, but these are the 64k streams.
--
toby10
Are you certain it is connecting to your network? i.e. Does your WiFi
have a unique name (not Linksys or Netgear, etc..)?
Have you tried rebooting the router?
Interference? Maybe a neighbor started using WiFi? Or moved their
router closer to your Touch? Or changed WiFi broadcast ch's?
--
Keep in mind two issues using the Touch IR remote in place of your
original SB3 IR remote...
1. it has no Brightness button, so you will have to set Brightness
manually in the player settings
2. the last three buttons are not coded properly, but they all work.
ex: Favorites button = Now
I'm running the latest version (7.5.3 on Netgear NV MAS) and notice that
some album names are listed twice, where the second listing is for
tracks that are also referenced on a playlist.
Music LibraryArtist=Elvin BishopAlbum=Big Fun (shows up twice)
The first listing shows the regular complete
Thank's a lot for your work Alan !
Could you please post the source script ?
As stated in this thread in my preceding post(October/3/2010):
I'm using it on Windows but with a SBS and music library located on a
NAS device (ReadyNas Pro). In this configuration there is a difference
beetween
bluegaspode;615687 Wrote:
Please use the stable version 7.5.3, or - if available - a
Squeezebox-Server Nightly version from one or two weeks ago (don't know
exactly when it started, but first reports arrived only this week).
7.5.4 r31939 is the last version of 7.5.4 that works for me.
--
Hi vagskal,
thanks for the report!
From my analysis (which might be wrong though) the bug was introduced
in 7.5.4, revision31961, so any version number below that (like yours)
should still work.
I opened a bug-report now
(http://bugs.slimdevices.com/show_bug.cgi?id=17030) so you might vote
Same thing happen here on my sb radio last night and this morning.
Radio connects to US East. I'm not running sbs.
--
wayneBR
wayneBR's Profile: http://forums.slimdevices.com/member.php?userid=38249
View this thread:
bluegaspode;615851 Wrote:
From my analysis (which might be wrong though) the bug was introduced in
7.5.4, revision31961, so any version number below that (like yours)
should still work.
I opened a bug-report now
(http://bugs.slimdevices.com/show_bug.cgi?id=17030) so you might vote
on it
The change causing it should be r31977
--
pippin
---
see iPeng, the Squeezebox iPhone remote and
*New: iPeng for iPad*, at penguinlovesmusic.com
pippin's Profile: http://forums.slimdevices.com/member.php?userid=13777
I found a workaround for the bug for anyone brave enough to mess with
the perl files of your installations.
It's only recommended if you cannot find some older nightly build or
don't want to revert to the stable 7.5.3.
On your server find the file Cometd.pm
- on linux find / -name Cometd.pm
- on
Well, it's not a feature. Are the pathnames _exactly_ the same for the
two listings? Sometimes if the library is on a network-attached drive
SBS will show one under the UNC path and one under the mapped drive
path. Or sometimes these issues expose shortcuts/symlinks that the user
forgot about.
pippin;615855 Wrote:
The change causing it should be r31977
Really? I had all the symptoms already with 7.5.4 r31961, which I
installed 1 March and almost immediately replaced with the previous
release (r31939). I have not even downloaded r31977 or any revision
after 1 March.
Oh well, just be
Voted so now it have 2 votes . One more and it is confirmed.
is it this that sometimes causes the now playing playlist to never
update ?
if you start the same album again, the songs apear in an instant , but
for example reasuming an older sesion for that player it never updates
...
Strange
Mnyb;615860 Wrote:
is it this that sometimes causes the now playing playlist to never
update ?
if you start the same album again, the songs apear in an instant , but
for example reasuming an older sesion for that player it never updates
...
I don't know of such a bug, can you try to
In detail ? For example i play and album stop the player do someting
else a couple of hours the Pad migth not even be on Squeezepad may or
may not be running.
Sometimes I have restarted the server it could be the last album
Ilistened to the day before.
The big album art is shown and i can skip
bluegaspode;615851 Wrote:
Hi vagskal,
thanks for the report!
From my analysis (which might be wrong though) the bug was introduced
in 7.5.4, revision31961, so any version number below that (like yours)
should still work.
I opened a bug-report now
Nikhil;614625 Wrote:
Moodagent still does not have a Desktop app..
Moodagent supports Winamp. Not really a desktop app, but there's
progress...
--
verypsb
1x Boom, 1x Classic, 1x Duet, 1x Receiver, 1x Touch
Please vote for bug 16791
(http://bugs.slimdevices.com/show_bug.cgi?id=16791)
stuffedspacedog;615811 Wrote:
Hola! Here's the updated fully configurable version.
There are some under the hood changes for greater stability.
This version now loads FB2K from within the script.
Unzip the file and place both FooSQ.exe and FooSQ.ini in your
Foobar2000 directory.
Mac and PC what about Linux a very large userbase uses linux often in
the form of a NAS .
I have a server running the rpm build , the profiler should ideally be
incorperated in the normal sbs web-UI .
Well I vote , maybe one of these days...
--
Mnyb
HI,
Thanks for the reply. I really don't know the model of my SB, but it's
one of the first or second generation. I've had it for years/ It won't
connect to the ATT gateway.
--
richpace
richpace's Profile:
Look on the bottom of the SB. If it says Squeezebox it's an SB1. If it
says Squeezebox2 it's an SB2. If it's an SB1 and you're trying to
connect it wirelessly check how your new router is set up. SB1 only
supports wireless B and WEP encryption. Your new router could be in
G only mode, or using
Have a look:
http://wiki.slimdevices.com/index.php/Hardware_comparison
maybe it is so old that it only supports WEP encryption not the never
WPA or WPA2 .
Btw WEP is not considered secure anymore
--
Mnyb
Main hifi: Touch
Thanks for the replies so far.
I plugged it back in and switched it on this morning and all was fine;
in fact it seemed faster and more responsive than recently when
accessing stuff, and so I presumed that a fresh reboot had solved the
problem. It was fine up until early this afternoon in fact.
You should also check out what other networks are around that could be
stepping on yours, as toby suggested. If your computer runs Windows,
download NetStumbler (freeware) and use it to see what other wifi
networks are in your area, how strong they are in your location, and
what channels they are
toby10;615830 Wrote:
Keep in mind two issues using the Touch IR remote in place of your
original SB3 IR remote...
1. it has no Brightness button, so you will have to set Brightness
manually in the player settings
2. the last three buttons are not coded properly, but they all work.
ex:
aubuti;615896 Wrote:
You should also check out what other networks are around that could be
stepping on yours, as toby suggested. If your computer runs Windows,
download NetStumbler (freeware) and use it to see what other wifi
networks are in your area, how strong they are in your location,
mikes;615870 Wrote:
3rd vote and confirmed.
Thanks for digging in and reporting the bug.
6th vote confirmed
Simon
--
simonjedrake
QNAP TS-239 (v 3.4.0 build 0212). Seagate Barracuda ES 1000GB x 2.
SSOTS 4.9.1b SC 7.5.4-31910
2 x SB3, 1 x SB2, 1 x SB Controller, SB Radio
vagskal;615858 Wrote:
Really? I had all the symptoms already with 7.5.4 r31961, which I
installed 1 March and almost immediately replaced with the previous
release (r31939). I have not even downloaded r31977 or any revision
after 1 March.
Oh well, just be careful with all new revisions
The radioio site has a pardon our dust message asking for patience as
they work through some transitional kinks. I assume this is related.
--
bwaldron
bwaldron's Profile:
AVRO does seem to have problems. AVRO easy listening was out the better
part of last week, but it seemed they repaired things friday late since
it worked on saturday after I contacted them. They seemed not to be
aware of any problems. But sunday morning, all AVRO stations where
down. Not good,
I'm interested in this conversation, because my SB3 remote seems to be on its
way out - I really have to press the buttons quite hard to get any response now.
It's a pity that with each new release, there's a new remote with different
function buttons. Why is brightness and size missing from
Moodagent has a desktop profiler -
http://www.moodagent.com/desktopprofiler - now a desktop Moodagent
application with an API is needed for a plugin to be written.
There is no info about the operation of the desktop profiler, whether
it writes its own tags etc.
--
Wirrunna
A camel is a
I got the following reply to an e-mail inquiry:
Hello
We are aware of the issue and are looking in to what is happening,
GREG WALTERS
Lead Customer Support Tech
radioio.com
customerc...@radioio.com| 800 884 8634 X 718
--
minimeh
actually, what would be a killer product, would be a upnp/dlna client
like what logitech is offering above.
if it competes unfavorably with slim isn't the point, b/c if logitech
doesn't make such a dlna client, someone else will.
--
MrSinatra
www.lion-radio.org
using:
sb2 sbc (my home) /
A poll associated with this post was created, to vote and see the
results, please visit http://forums.slimdevices.com/showthread.php?t=86053
Question:
A poll associated with this post was created, to vote and see the
results, please visit http://forums.slimdevices.com/showthread.php?t=86053
Question:
I own SqueezePad and iPeng for the iPad and made the in app purchase to
enable playback on the device. Does anyone know if the device playback
feature is enabled in any iPhone apps? Since I have a couple old iPhone
3G laying around with speaker docks, I thought it would allow me to add
a couple
Never mind, I purchased iPeng for iPhone and answered my own question.
Works great.
--
realcodeguy
realcodeguy's Profile: http://forums.slimdevices.com/member.php?userid=41870
View this thread:
I just tried this using my iPodTouch (v3) with iPeng 1.3.1. I didn't
have a dock to test with, but using a std Apple component AV cable
(dock connector in, R+L audio out, component video out), it worked like
a charm. No problems.
--
gharris999
Philip Meyer;615940 Wrote:
I don't know if there would be a problem with press-and-hold brightness
key to install new firmware though.
Didn't there used to be a setting buried deeply in the on-screen menus
of IP3K players controlling auto-firmware-update? I can't find it now
on my
fakarava2;615872 Wrote:
Etat du Squeezebox Server
Version : 7.5.3 - r31815 @ Fri Jan 28 10:03:43 EST 2011
Nom d'hôte : vortexbox.localdomain
Adresse IP serveur : 192.168.1.168
Port HTTP serveur : 9000
Système d'exploitation : Red Hat - FR - utf8
Architecture de la plate-forme :
aubuti;615857 Wrote:
Well, it's not a feature. Are the pathnames _exactly_ the same for the
two listings? Sometimes if the library is on a network-attached drive
SBS will show one under the UNC path and one under the mapped drive
path. Or sometimes these issues expose shortcuts/symlinks that
Here's the updated version, there's a small bugfix to prevent the song
playing again after FB2K has closed. Also the AutoIt script is in
script.zip.
+---+
|Filename: Script.zip |
The AutoIt script is here:
$m_ip = IniRead(FooSQ.ini,parameters,SqueezeBoxServerIP,)
$m_port =
IniRead(FooSQ.ini,parameters,SqueezeBoxServerCLIPort,)
$m_playerid =
IniRead(FooSQ.ini,parameters,SqueezeBoxPlayerID,)
$m_fooexe = IniRead(FooSQ.ini,parameters,Foobar2000Location,)
$m_amip =
volpone;615838 Wrote:
Thank's a lot for your work Alan !
Could you please post the source script ?
As stated in this thread in my preceding post(October/3/2010):
It will be very usefull for guys using SBS on a Nas to set the path
parameters in the ini files and let the script
Yes, I almost always browse to my music folder with SBS and do not use
artist, album, etc. The reason for this is that I like to go in and
either select lossless or 24bit albums to listen to, but I also like to
have access to my mp3 albums that I have only in lossy format if I want
to listen to
I have 3 SB3, 3 Booms, 1 Duet and one Radio... and a large library that
consists of MP3s and quite a few FLACs.
I have just experienced one hangup while playing FLACs. Other than that
it seems stable for me (knock on wood) wven though I have played a mix
of players in full synch.
I run 7.5.3
No, it's actually pretty easy to do what you want. However it sounds
like your file organization is a mess, and you probably need to
rearrange things to get them to work the way you want with SBS. For the
most part SBS doesn't care about your file/folder structure, but if you
insist on using
gharris999;616011 Wrote:
Didn't there used to be a setting buried deeply in the on-screen menus
of IP3K players controlling auto-firmware-update? I can't find it now
on my Transporter...but it auto-updates these days.
Yes.
Really old fw then the only option was press brigthness to upgrade
Hi Pippin, any plans for a Mac Os X version of iPeng now that it has
it's own App Store too?, I know is not the same as iOS but I was just
wondering.
--
pichonCalavera
*rip* (eac) *convert* (flac) *tag* (musicbrainz/mp3tag)
*normalize* (replaygain/foobar2000) *albumart* (www/firefox)
61 matches
Mail list logo