Peter To go from DocBook to MD, I do something like:pandoc -f docbook -t
markdown_github 2.xml -o 2.md and back is: pandoc -s -t docbook -f
markdown_github 2.md -o 2-out.xml warning: I have not used this in a few years,
so you mileage may vary. Regards,Dean Nelson In a message dated 1/26/2021
6
Hello Filippo,
What you need it to the the "role" attribute and use "fo" and "html" as
arguments.
The position and size of all the windows
can be stored for a later session
Regards,
Dean Nelson
In a message dated 10/24/2018 6:23:34 AM Pacific
Good questions ;-)
I downloaded the file "docbook-xsl-nons-1.79.2.zip" from
https://github.com/docbook/xslt10-stylesheets/releases
I have a template that pulls the docbook xsl version ($VERSION) variable
out and displays it (along with other info).
---
DocBook XSL VERSION is:
XSLT
Stefan,
Sorry about the mislead. It is actually is the $VERSION that is "snapshot".
I am also using the nons version,
I don't know where $VERSION is actually generated - maybe version.xsl? I
think it is formatted from something else, buty I may be wrong.
Regards,
Dean Nelson
In a messag
Stefan,
The dbxslversion PI on this version still says "snapshot" not "1.79.2".
Is that part of the release process that got missed in the conversion to
github?
Regards,
Dean Nelson
In a message dated 12/15/2016 6:09:29 A.M. Pacific Standard Time,
ste...@seefeld.name writes:
It would be helpful to see a bit more info.
1. What was the commands used and what was the console output?
2. The XML looks OK, but do you have adequate permissions for that SVG
file?
3. Is this in an "info" section?
Regards
Dean Nelson
In a message dated 6/21/2016 3:34:51 P.M. Pacific Day
Bob,
This makes sense to me now from what I have been seeing. I when I use an
XPointer it comes along with the ID. If I use the XInclude only, there is no
need for an ID in my files so I did not put one in. That explains why it is
happening in my system. It really had nothing to do with the X
Thanks for the input Bob.
I do want to emphasize that these are only FOP warnings and not errors.
In looking at the FO output, 1.79.0 puts out a list of "fox:destination"s
that have the IDs of each link (this is not in 1.78.1 output). Some of
these are resolved but others issue a warning:
Bob
Last night I ran the 1.79.0 load with my system (xsltproc, DB 4.5, fop 1.1)
For the most part, everything works as expected. However, I am now getting
a FOP warning when I use an XPointer. It looks like it adds it to the list
of FOP destinations, but does not use it. Hence :
http:
Bob
Last night I ran the 1.79.0 load with my system (xsltproc, DB 4.5, fop 1.1)
For the most part, everything works as expected. However, I am now getting
a FOP warning when I use an XPointer. It looks like it adds it to the list
of FOP destinations, but does not use it. Hence :
http://
Is the next Docbook XSL version going to support long table markers? (i.e
'continued' on the top of next page of long tables).
That's a very nice feature for tables.
Regards,
Dean Nelson
Radu,
That says a lot! It seems like a simple fix to me. I wonder why they let it
out of the gate that way? That's a major bug.
I will probably wait as well since I have no interest in maintaining a
patch in our system and the time between FOP updates is usually quite a long
time.
Thanks
Hello
I have tried to update our production documentation system to FOP 2.0 but
in doing so I discovered a little problem that prevented the use of FOP 2.0.
I get an exception and cannot get around it without recompiling with a
fix. (See https://issues.apache.org/jira/browse/FOP-2461 )
I
Hello,
I am trying to resolve/replace the ENTITYs in my Docbook files without
removing the DOCTYPE declaration. I tried using XMLLINT:
xmllint --noent --dropdtd -o outfile.xml infile.xml
but this removed the DOCTYPE line along with resolving the ENTITYs. So if
I don't use the --dropd
Thanks Frank!
Actually, I was looking for a 1.1 version (but I did not state that).
However, someday I will hopefully switch everything to 2.0 when Docbook
fully does.
In a message dated 3/20/2015 2:19:07 A.M. Pacific Daylight Time,
f-stei...@berger-und-steimke.de writes:
Hi,
Saxon sup
Yes, thanks Ben.
Your comment got me further to a solution. I now have a tool that produces
a listing of all of the xinclude'd files in a master file. This will list
out to the screen and make a file (xfilelist.txt) of all the files.
I have included the files here for anyone else that might
All,
I'm sure this is a pretty common issue? I need to get a list of all of my
XIncluded files in a document.
I need to package up all of the Docbook files required for a particular
document so I can send them off to the translators. The document is in a
directory with many more Docbook f
Brett,
It may be time to do some debugging with statements to see
what is really going on. Do you know that your template is actually
activated?
Also, what command line arguments are you using with XSLTPROC?
Dean
In a message dated 4/29/2014 6:29:32 P.M. Pacific Daylight Time,
brett.
Brett
This should do what you need. The changes are that admonition.properties
needs to be used in stead of graphical.admonition.properties.
Regards,
Dean Nelson
http://docbook.sourceforge.net/release/xsl/current/images/'"/>
1pt solid blue
1pt solid red
1pt solid b
Brett,
The simple answer is to add
1pt solid blue
or a variation of it.
However, I have found that you will need to also deal with the title box as
well or it will look a bit weird. So below you will see my admonition
section that you should be able to modify to suit your needs.
Regards
Its been years since I dealt with this code, but it looks like you need to
use the "width" attribute in the table.
Sorry, I don't have your table to test with anymore. I will test it on some
of mine today.
In a message dated 3/26/2014 7:36:49 A.M. Pacific Daylight Time,
rogerio.r...@eixod
Here is what I use in my stylesheets.
Regards
Dean Nelson
mailto:{@width}"/) >
Table width set to
Table width NOT set.
mailto:{@width}"/) >
Table width set to
Table width NOT set.
Bob,
These are a great start. I am interested in this because I currently use a
hack to use a full page landscape figure. We use a landscape mechanical
drawing rotated to fit on a letter page. To do this I have to use a PI :
Then use scalefit=1 and width=100% to get it to full p
I did not try to generate eBook format, but I did see the correct output in
PDF in my system.
Maybe one of the eBook gurus can chime in here ;-)
Regards,
Dean Nelson
In a message dated 10/2/2013 12:59:48 P.M. Pacific Daylight Time,
rodrigues.joac...@gmail.com writes:
Hi Thanks for
Hello,
First make sure your DOCTYPEs are correctly used. I corrected the included
file's DOCTYPE before it would legally compile.
Next, you can use mathphrase:
http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd";>
Fermat's Last Theorem
x^n + y^n ≠ z^n ∀ n > 2
xn
+ yn
≠ zn
∀ n ≠ 2
Hello!
For us to help you, we would need to know a little more about your issue.
Equations can be a bit tricky for all formats, but I think you are trying to
get it to work in eBook format?
Can you tell us what you have tried, specifically? It would help us
understand your issue.
Regards
I have noticed that there is some empty literallayouts that "appear"
without reason. And some unicode spaces are inserted without reason.
In a message dated 5/24/2013 9:56:56 A.M. Pacific Daylight Time,
morten_engelhardt.ol...@atmel.com writes:
Yes, I have, but reverted to using the xml o
All,
I noticed that the latest release of Doxygen (1.8.4) now supports Docbook
as an output.
I have tried the output on one of my projects and the output looks OK, not
perfect, but its a good start! It makes compliable Docbook that you don't
need to touch.
It puts everything in a single
Eric,
I use a template that placed a "checkbox" in front of the procedure step.
You probably could adapt this template to do what you need.
Regards,
Dean Nelson
]>
http://www.w3.org/1999/XSL/Transform";
version="1.0"
xmlns:fo="http://www.w3.org/1999/XSL/Format"; >
1
&C
Does this work?
In a message dated 3/25/2013 10:02:29 P.M. Pacific Daylight Time,
tso...@vocera.com writes:
When I post a question on a forum I keep working at it till I find the
answer. Often times I find the answer before someone in the know has time to
respond, then I post the answ
Thanks Jirka. I thought so.
But why would the template even get called if there is no "qualifying"
criteria?
In a message dated 3/25/2013 3:10:15 P.M. Pacific Daylight Time,
ji...@kosek.cz writes:
On 25.3.2013 22:18, deannel...@aol.com wrote:
> Is this a normal warning when using
Hello,
I have recently updated my Docbook processing system to include Saxon
9.4.0.7. Everything works well but I have a warning that does not make sense
and
maybe someone here can explain it.
Warning: at xsl:variable on line 65 column 38 of math.xsl:
SXWN9001: A variable with no fol
Yes, I would be interested. We currently support generation of the CHM
files for the old help files. However, the MS help tools are getting very long
in the tooth and is very quirky. They do not really support some of the
newer stuff (i.e. MathML) and such that are in our printed docs. The o
You're correct Paul. However, even the WYSIWYG tools mentioned do not give
you true WYSIWYGness like Word will give you. Its more of a rough
approximation. It because of the nature of divorcing the content from the
style
(especially in the FO generation).
But if rough approximation is good
Paul,
I've used oXygenXML before and if you can afford it, it will accelerate
your content development. However, if you need a cheap (free) editor with "OK"
XML support, use Eclipse which has XML support and a spell checker.
Regards,
Dean Nelson
In a message dated 8/12/2012 4:09:50 P.M. P
You need to use the FOP plugin from JEuclid (JEuclid.sf.net). This will
convert the MathML to FOP.
I will usually have all my MathML in separate files and then xinclude them.
Here is a nice centered
equation
http://www.w3.org/2001/XInclude_
(http://www.w3.org/2001/XInclude) " href="m
Lars,
I make my adjustments via a parameter as below.
Hope this helps.
Dean Nelson
---
1.0
1.0
auto
pt
bold
#FF
#00
pt
In a message dated 7/3/2012 8:54:55 A.M. Pacific Daylight Time,
lars.vo...@gmail.com writes:
Hello,
FOP 1.0 and JEuclid work fine for me both in Windows and SuSE Linux.
However, for floats using FOP, that's a problem. Usually you would need to
do that in a hidden "table" to get the side floats. But that is a hack ;-)
I don't have a solution there. Sorry.
Dean
In a message dated
Stefan,
FYI, I use the FOP/Jeuclid combination to satisfy my XML+MML to PDF
needs. That way I can use MML directly or xinclude the equations as needed.
_http://jeuclid.sourceforge.net/_ (http://jeuclid.sourceforge.net/)
Regards,
Dean Nelson
In a message dated 6/24/2012 10:54:23 A.M. Pa
How about
or something like that?
In a message dated 6/14/2012 10:19:29 P.M. Pacific Daylight Time,
da...@dpawson.co.uk writes:
On 14/06/12 22:57, deannel...@aol.com wrote:
> Ok, I found the issue inside my layers.
>
> However, this issue should be able to work easier than shutting
Lars,
Not sure what happened in your layer, but here is what I use for
progrmalisting shading.
Regards,
Dean Nelson
http://www.w3.org/1999/XSL/Transform_
(http://www.w3.org/1999/XSL/Transform) " version="1.0"
xmlns:fo="_http://www.w3.org/1999/XSL/Format_
(http://www.w3.org/1999/XSL/Fo
Ok, I found the issue inside my layers.
However, this issue should be able to work easier than shutting off the
multi year combination parameters. I assume that the dbtimestamp is being
evaluated after the multi-year-combination template of the copyright/year?
Is there a way to get the dbti
Greetings,
I am hitting a snag. I don't want to continually update my copyright year
in my docs. So I used the dbtimestamp PI to pick out the year and put that
in an ENTITY included with all my docs. Sounded simple.
" >
Then I used this to fill in the year in the copyright field in
Jeff,
I use a simpler method that just uses a font-size attribute. A bit more
crude, but it works for me. You could expand this to cover paras in chapters
with that attribute. That would make sure that the titles for the chapter
still looked like the same as others.
The downside of this cod
All,
I need to detect the last page (not back page) in my article style sheets
so I can put a legalnotice at the bottom of the last page. Any ideas? (FOP
1.0, DB 4.5)
It appears that pageclass does everything except "last page".
Regards,
Dean Nelson
Joy
Did you try to run it against book2.xml alone? That will tell you if it is
a valid book.
Once you get book2 to validate then try it with the set.
Regards,
Dean Nelson
In a message dated 4/30/2012 7:53:24 A.M. Pacific Daylight Time,
joy.and...@ansys.com writes:
I thought I had th
Its not necessary to use Cygwin or MinGW.
I use a batch file that calls XSLTPROC and FOP to generate PDFs under
Windows.
Check our Bob Stayton's book for more info.
Regards,
Dean Nelson
In a message dated 4/18/2012 6:51:52 A.M. Pacific Daylight Time,
yoursurrogate...@gmail.com writes
Jeff,
Are you using Docbook 4 or 5? Also, are you using a current version of the
XSL stylesheets? Is there a reference that tells you that Saxon doesn't
resolve XPointers?
Here is what I know from my own tools. Saxon/Xerxes and XSLTproc handle
XPointers. I use them in every doc I generate
Jeff,
Maybe I am not understanding the depth of the issue because I use XIncludes
and XPointers and they work for me both in xsltproc and Saxon/Xerces (I
maintain both in my development environment).
I have also used profiling in the past and had no problem. However, maybe
you have come acr
Jeff,
I use XIncludes, and not olinks or profiling (on the file I just used). The
only difference in the switches is that I use --novalid which skips the
skips the Dtd loading phase.
Are you using single pass profiling or two-pass?
Dean
In a message dated 3/9/2012 10:57:20 P.M. Pacific
One more bit of info. I just ran a 1200 page doc (XP/2Gb/xsltproc) and it
used about 230 MB of memory to churn through that doc.
In a message dated 3/9/2012 2:44:36 P.M. Pacific Standard Time,
deannel...@aol.com writes:
Jeff,
I routinely process books over 400 pages (XP/2Gb/xsltproc) and r
Jeff,
I routinely process books over 400 pages (XP/2Gb/xsltproc) and rarely see a
memory error. However, when I DO see one, it is because I have done
something wacky in the XSL or have done something in the XML that was "legal"
but
not supported in the XSL. Rare though.
What command line s
Gihan,
You are referring to the instructions in the source tree that enumerate the
steps required for building a "release" package. This is for the
developers who preprocess/build each release that shows up on SourceForge.
This is
not a normal process for users of DocBook.
The normal us
Gregorio,
You might look at adding --nonet and --novalid to your xsltproc command
line if they are not there already.
You didn't mention the command line options that you are invoking XSLTPROC
with.
Regards,
Dean Nelson
In a message dated 2/9/2012 10:17:57 A.M. Pacific Standard Time,
Lwan,
Here is what I am using for centering tables. This may get you closer. Its
a modification of Bob Stayton's example in
_http://sagehill.net/docbookxsl/TableAlignment.html_
(http://sagehill.net/docbookxsl/TableAlignment.html) .
Regards,
Dean Nelson
Donna,
What do you mean by "massive amount"? Are the files huge or do you have a
1,000 files?
Some people use the Word to HTML to DocBook trail, some a more direct
conversion, like Majix. Either way, how much cleanup you do after the
conversion
is important.
I use Majix and I have twe
Bob,
It seems to me that this change should be made to the standard DocBook XSL
sheet?
I cannot think of a situation where you would not want captions stuck to
mediaobjects on the same page. Maybe if the caption was a paragraph long?
Maybe it would be too constrictive?
Regards,
Dean Nels
Joel,
Yes, here is my layer that I use.
http://docbook.sourceforge.net/release/xsl/current/images/'"/>
#FF
#FF
#B5FFB5
#FAFA8C
#FFADAD
#00
always
5pt
-1pt
1pt solid blue
always
#E0E0E0
left
5pt
1pt solid blue
1pt solid blue
1pt solid blue
Benno
I have had similar problems in the past but have solved them with the
following:
This doesn't look much different from yours, but the scale-to-fit come all
the way through for me. I am using FOP 1.0. I have another similar template
that is for tables but leaves off the
Lars,
Setting the "image.src.path" parameter would eliminate a need to prefix the
path on all images. However, that doesn't seem to be your problem.
Everything you stated/done should be working. The FO code looks right and it
does
seem to fit the file structure.
I am assuming that you ar
Paul,
We use DejaVu fonts that are freely available from
_http://dejavu-fonts.org/_ (http://dejavu-fonts.org/)
They have several unicode fonts that incorporate almost all of the unicode
sets. I have found them very clean and they are continually maintained as
well.
Regards,
Dean Nelson
All,
This is an interesting discussion. Wouldn't it be great if, in addition to
the 'continues' attribute, one could also remove all ambiguity in this
feature by also adding an ID of the list that is meant to continue? That way
an author can be very deliberate about which list they are contin
Dave,
To xinclude text files in programlisting:
http://www.w3.org/2001/XInclude_
(http://www.w3.org/2001/XInclude) "href="MyFile.txt" parse="text"
/>
http://www.w3.org/2001/XInclude_ (h
ttp://www.w3.org/2001/XInclude) "
hrefCDATA #REQUIRED
parse (xml|text) "xml"
en
Thanks - however, you just illuminated a few issues:
I support both Windows and Linux with the same distro, so a sym link would
not be an advantage. Yes, I could rename the directory every time I update,
but then one must actually dig into the directory to find version
information when need
All
1. Is there a better way of accessing the draft.png file in stock docbook
xsl tree from my customization layer so I don't have to change the version
number every time I update the XSL to a new version?
Could there be a standard docbook-xsl version ENTITY that I can build a
path
Matt,
We use MathML and XSLTPROC to process the Docbook. I have found out that
you need to add in some ENTITY statements into your customization. We do this
primarily because we put MathML in a separate XML file and then include
it.
http://www.w3.org/1998/Math/MathML' ">
http://
Johnny
All three items are quite easily doable.You need to have a customization
layer that "adjusts" the builtin capabilities. Bob Stayton's book is a must.
I still reference it even after years of working with Docbook. And this is
the correct forum for getting those answers.
I would sugg
That refers to the line number:character postion. Trying to make sense of the
FO output is a nightmare unless you reformat the FO before running it into FOP.
The way I do it is to use XMLLINT to reformat. Here is how I set up the call:
xmllint --nonet --noent --nowarning --version --timing --for
Lwan,
Can you show an example in your XML?
Regards,
Dean Nelson
In a message dated 12/21/10 08:29:17 Pacific Standard Time, berh...@punkt.de
writes:
Hi guys!
I am using inlinemediaobject/imageobject/imagedata very often.
If I use inlinemediaobject in an orderlist the list numbering of the
It looks like you are using an older version of fop-pdf-images. You may want to
update from the site
http://www.jeremias-maerki.ch/development/fop/
and then follow the instructions in the README. This should get you going.
I use this setup quite often in the following manner:
I was a bit too quick on the send button on that email !
The fop-pdf-images plugin allows you to include PDF images in FO output for
FOP.
SVG is native and already included in the FOP processor.
In a message dated 12/07/10 02:39:22 Pacific Standard Time, berh...@punkt.de
writes:
Hello Dean!
Dean
Dean
In a message dated 12/02/10 12:14:55 Pacific Standard Time,
tom.brow...@gmail.com writes:
On Thu, Dec 2, 2010 at 14:09, deannelson wrote:
> Tom
> What actual problem are you having?
Dean, I'm using db 5 and fop 1.0 on Ubuntu and get the following
can find this plugin at
http://www.jeremias-maerki.ch/download/fop/pdf-images/
That said the XML code is still a valid method for SVG in figures.
Sorry to confuse the issue.
Regards,
Dean Nelson
In a message dated 12/02/10 11:14:02 Pacific Standard Time, deannelson writes:
Tom,
I use SVG files
Tom,
I use SVG files in my formal figures and they work very well. However, if you
are using FOP, you need to install a addon package so that FOP can deal with
the SVG natively. The package I use is "fop-pdf-images". Its a jar file that
gets put in the FOP classpath.
So this is how it looks as
Tom
Here is an adjusted version that triggers only when "align" is used on the
table. This has some peculiarities when processed with FOP 1.0.
I would suggest that you use fixed column widths and not proportional in the
XML tables because proportional is not quite right in FOP when used in a ta
Programlising questionScott,
This sounds faintly familiar. Are you running simple stock Docbook stylesheets
or do you have a customization layer? Are you running the current XSL
stylesheets?
Regards,
Dean Nelson
In a message dated 11/10/10 01:12:27 Pacific Standard Time,
scott.speig...@hauf
Nested listsScott,
Maybe if you showed a specific example? I don't see that behavior in my own
system. My simple test is this:
1
1
1
2
2
2
2
1
1
Reg
FYI - you usually just need to close out the command lime window and start that
again. That is when it starts another session and reloads the environmental
variables (i.e CLASSPATH, PATH, etc).
In a message dated 11/09/10 01:12:51 Pacific Standard Time,
eduard.ti...@i-free.com writes:
Srikris
Tom,
Here is what I use:
and you need to use where "yada-yada" is any
font-size or percentage.
Regards
Dean Nelson
In a message dated 11/09/10 06:55:43 Pacific Standard Time,
tom.brow...@gmail.com writes:
Is there any way to change the font size f
well.
start
Cheers
Dean Nelson
In a message dated 11/08/10 16:16:45 Pacific Standard Time,
tom.brow...@gmail.com writes:
On Mon, Nov 8, 2010 at 17:57, deann
Tom,
I have had this issue as well. Here is how I solved it.
center
left
Regards,
Dean nelson
In a message dated 11/08/10 13:51:46 Pacific Standard Time,
tom.brow...@gmail.com writes:
I tried t
Keith,
Huh? 1.61.1 ?
You're just checking to see if we are awake ;-) ?
Dean Nelson
In a message dated 10/04/10 19:54:27 Pacific Daylight Time, abdela...@gmail.com
writes:
Hi,
I'll be preparing the 1.61.1 Release Candidate Wednesday 6 Oct 2010.
Please have your submissions checked in by th
All,
I understand Larry's concern. However, this scenario provides for a "broken"
FOP system right out of the box, which is a concern of mine. Yes, we can
provide a customization that shuts this off, but if we are eventually going to
set it to "no" why not just have the default "no" and set the
&aid=3067316&group_id=21935&atid=373747
Regards,
Dean Nelson
In a message dated 09/08/10 09:55:41 Pacific Daylight Time, deannelson writes:
Hello,
I was wondering if anyone else had experienced these issues with 1.76.0 which
were not there with 1.75.2. I am trying to get the xref number
...@free.fr writes:
Hi all, Dean,
I agree for auto-numbering ; don't no for draft mode images.
Regards,
--
Christophe HARO
christophe.h...@free.fr
----- "deannelson" a écrit :
> Hello,
>
> I was wondering if anyone else had exper
Hello,
I was wondering if anyone else had experienced these issues with 1.76.0 which
were not there with 1.75.2. I am trying to get the xref numbering to show up
and then I discovered that the auto-numbering was not working as well. I am
using the same XML and XSL that I posted last week.
Issu
no << ... >> in
French) ; number followed by a point, not a comma. Example : Figure 1.4. Les
classes
--
Christophe HARO
christophe.h...@free.fr
--------
- "deannelson" a écrit :
> Ok, I tested this with the snapshot for 27-Aug-10 and it did
If its anything like the snapshot I just tested, I'm sure it will be fine.
Thanks!
Dean
In a message dated 09/03/10 12:26:18 Pacific Daylight Time, abdela...@gmail.com
writes:
On Fri, Sep 3, 2010 at 11:54 AM, deannelson wrote:
> So maybe I need
> to try the new release cand
1
2
In a message dated 09/03/10 11:56:21 Pacific Daylight Time, deannelson writes:
Bob,
I'm using just the simple xrefs with linkends pointing to IDs. That's what is
so strange.
OK I just did some testing with clean 1.75.2 and it works as advertised with
your xrefs?
Bob Stayton
Sagehill Enterprises
b...@sagehill.net
- Original Message -
From: deannelson
To: docbook-apps@lists.oasis-open.org
Sent: Friday, September 03, 2010 10:39 AM
Subject: [docbook-apps] XREF text/label issue
Hello,
I have an issue that has either popped up or I just
Hello,
I have an issue that has either popped up or I just realized it. It has to do
with the XREF in certain instances it does not display the numbered sections
(i.e "see 1.2.3 Start Up Procedures"). This is correct when referencing figures
and chapters, but it leaves off the number reference
Thanks Mauritz & Bob!
In a message dated 08/26/10 09:37:07 Pacific Daylight Time,
m...@johanneberg.com writes:
| -Original Message-
| From: deannelson
|
| After looking closer in the 1.75.2 stylesheets, the
| segmentedlist template in fo/lists.xsl has a problem when
|
01:01:55 Pacific Daylight Time,
reflex...@reflexing.ru writes:
On Thu, Aug 26, 2010 at 3:12 AM, deannelson wrote:
Hello all,
I am using a segmented list (1.75.2) and it gives me a warning in FOP 1.0 but
still renders fine:
WARNING: The following feature isn't implemented by Apach
Hello all,
I am using a segmented list (1.75.2) and it gives me a warning in FOP 1.0 but
still renders fine:
WARNING: The following feature isn't implemented by Apache FOP, yet:
table-layout="auto" (on fo:table) (See position 2:23461)
Aug 25, 2010 2:05:58 PM org.apache.fop.events.Lo
Anitti,
I do not know of a specific bugtrack item describing this. However, I do know
that this has been going on for many years. FOP has a table of compatibility
with the FO standard. You may want to check this.
Regards,
Dean Nelson
In a message dated 08/25/10 03:38:31 Pacific Daylight Time
at is to edit the lines to make them shorter which is not
maintainable for code samples.
On 8/15/2010 4:31 PM, DeanNelson wrote:
> Steve,
> I get these all the time. It is a warning that FOP has overflowed an
> area with text. I usually get them when a cell in a table is too small
Steve,
I get these all the time. It is a warning that FOP has overflowed an area with
text. I usually get them when a cell in a table is too small for the data. FOP
still prints it, but complains, and if it is really tight it will bleed into
the next cell.
I think "mpt" is milli-points.
Usual
ensions, yet.
Is there any reason that this PI has to work using the block-container
trick? If you made a processing instruction that created a regular
block that had both a keep-with-next.within-column="always" and
keep-with-previous.within-column="always"?
-Sam
On F
All,
Does anyone know if the docbook stylesheets method for "dbfo-need height" is
now supported in the new FOP 1.0 release?
I know it was broke in the 0.93 & .0.95 releases.
Regards,
Dean Nelson
Jirka,
I can confirm a 28% decrease in my compile time with these changes. Wow!
Regards,
Dean Nelson
In a message dated 07/20/10 15:45:54 Pacific Daylight Time, ji...@kosek.cz
writes:
Jirka Kosek wrote:
> New build should appear shortly at
>
> http://docbook.sourceforge.net/snapshots/
>
1 - 100 of 187 matches
Mail list logo
