Charles Marcus schreef:
On 11/25/2007, Marc Cuypers ([EMAIL PROTECTED]) wrote:
Charles Marcus wrote:
On 11/23/2007, Marc Cuypers ([EMAIL PROTECTED]) wrote:
# dovecot --version
1.0.rc15
Extremely old...
Upgrade...
Does your reply mean that allow_nets didn't work with version 1.0.
On 11/26/2007, Marc Cuypers ([EMAIL PROTECTED]) wrote:
I'll try to compile dovecot 1.0.7 on a test machine (debian etch),
and test again.
I forgot the best reason - improvements (sometimes major) in performance
and behavior... its just 'better'... :)
--
Best regards,
Charles
http://dovecot.org/releases/1.1/beta/dovecot-1.1.beta9.tar.gz
http://dovecot.org/releases/1.1/beta/dovecot-1.1.beta9.tar.gz.sig
Some changes since beta8:
- This release should work perfectly with NFS attribute cache enabled.
- Fixes to handling what should be written to cache file and when
-
I was writing this to beta9 announcement, but it grew so huge that I
guess a separate mail is better. :)
I've spent quite a lot of time this last week redesigning/rewriting
Squat indexer. I think the redesign is good enough now that I'll just
replace the existing squat with this new one in next
On Fri, 2007-11-23 at 16:12 +0100, Marc Cuypers wrote:
Some of the mail users may only login from the LAN, while others can
login from the LAN and the internet.
I've read about allow_nets but i can't find very much info when dovecot
is used with ldap. Can someone give me a direction (url,
On Mon, 2007-11-26 at 10:40 +0100, Emiliano Gabrielli (aka AlberT)
wrote:
is it possible to customize the overquota message ?
I'd like very much if it was possible to use the %d in the postmaster mail
address
Hmm. Sounds like this could be useful. Maybe if postmaster_address ends
with @
On Sun, 2007-11-25 at 22:56 -0600, Kyle Wheeler wrote:
On Saturday, November 24 at 10:13 PM, quoth mouss:
If for some reason you are completely stuck with 0.99.x, then yes,
changing to Maildir format is pretty easy, and there are plenty of
conversion scripts out there in the world. Just ask
On Fri, 2007-11-23 at 18:47 +0100, Ingo Rogalsky wrote:
This solves the issue. Thanks. Nevertheless I'm going to disable the
quota plugin because of the long recalculation time and imap clients not
usable during this.
But one more question: Would it be possible to disable the recalculation
On Thu, 2007-11-22 at 21:16 +0300, Maxim wrote:
#0 0x08051e2d in auth_client_request_continue ()
(gdb) bt
#0 0x08051e2d in auth_client_request_continue ()
#1 0x0804b8db in client_auth_input ()
#2 0x080562ec in io_loop_handler_run ()
#3 0x0805599d in io_loop_run ()
#4 0x0804d963 in
On Fri, 2007-11-23 at 03:24 -0800, Kleyton M. wrote:
Nov 23 09:00:43 golf dovecot: IMAP(everli): Maildir
/home/everli/Maildir sync: UID next_uid (89 90, file =
msg.BAwd:2,)
I don't understand your language, but I do understand this error
message. You've configured Procmail to deliver mails
On Wed, 2007-11-21 at 15:09 -0600, Harrison Metzger wrote:
Hello,
In the pass_attrs field one can map ldap attributes to dovecot attributes.
I'm wondering if I can map both ldap attribuets and static attributes to a
dovecot value in the same passdb section.
It's possible with v1.1, but not
Hi Timo,
Both scripts compile fine, but their regex never match. Has anyone
an idea why? I'm using Dovecot 1.0.0 on Debian Etch stable.
So I guess you also use Debian-compiled Sieve plugin? It's possible that
it doesn't have regex support compiled in. I'm not sure if it gives any
errors or
On Wed, 2007-11-21 at 20:29 +, Adrian Barker wrote:
Two weeks ago we switched all our IMAP users (around 25,000) from the
Washington IMAP server to Dovecot, and since then there have been
several occasions when reading new email just hangs, and duplicate
emails appear. We are using the
On Mon, 26 Nov 2007 15:04:06 +0200, Timo Sirainen [EMAIL PROTECTED] wrote:
On Thu, 2007-11-22 at 21:16 +0300, Maxim wrote:
#0 0x08051e2d in auth_client_request_continue ()
(gdb) bt
#0 0x08051e2d in auth_client_request_continue ()
#1 0x0804b8db in client_auth_input ()
#2 0x080562ec in
Brent Clark wrote:
I read the documentation on NFS, but from other sites i have read.
Most say this is NOT the best solution.
I use NFS, as do quite a number of people - it may not be the best
solution, but there are few others for realising shared storage at all
sensibly. Most of the
On Wed, 2007-11-21 at 16:38 +0100, Edgar Fuß wrote:
Just to know: is there simply no interest in libwrap-ing dovecot or is
there a better way to do it or is my patch considered inadequate?
I also wrote libwrap patch a few years ago:
http://dovecot.org/patches/1.0/tcp-wrappers.patch
The problem
On Mon, 2007-11-26 at 16:13 +0300, Maxim Lougovsky wrote:
i have installed exim with self delivery (not dovecot LDA) and just install
from port mail/dovecot-sieve and have these crashes.
e.g. finally case is:
1) install exim with Maildir delivery
2) install dovecot
3) start both of them
On Wed, 2007-11-21 at 03:13 +0100, Ronny wrote:
If that worked, try adding exit(0); as the first statement in
src/auth/main.c's main() function to see if it returns 53 before or
after it reaches that far.
I put some information output to the code (i do not have a debbuger
running yet
On Tue, 2007-11-20 at 21:08 -0600, Harrison Metzger wrote:
Hello
I'm trying to do an ldap proxy but it is not working, it just continues to
access the user's mailbox. I was able to do a proxy with a user in a
passwd-file, but not ldap directory. Here is part my args file on the
passdb ldap
On Mon, 26 Nov 2007 15:22:29 +0200, Timo Sirainen [EMAIL PROTECTED] wrote:
On Mon, 2007-11-26 at 16:13 +0300, Maxim Lougovsky wrote:
i have installed exim with self delivery (not dovecot LDA) and just
install
from port mail/dovecot-sieve and have these crashes.
e.g. finally case is:
1)
On Mon, 2007-11-12 at 11:49 +0530, Abhijit Hoskeri wrote:
On Sat, Nov 10, 2007 at 07:56:43PM +0200, Timo Sirainen wrote:
i_fatal() exits the process. You probably want to use i_error() instead.
Thanks a lot. I have fixed this. I have two more questions:
* How do I know whether the
I turned auth_bind off by commenting it out. Here is what my logs show:
Nov 26 07:40:56 holiday dovecot: auth(default): client in: AUTH 1
PLAIN service=POP3 secured lip=127.0.0.1 rip=127.0.0.1
resp=AGFwcGxlc2VqAHRhYmxl
Nov 26 07:40:56 holiday dovecot: auth(default):
Hi list,
I'm trying to get a global sieve mailfilter with per-user sieve scripts
to work.
At the lda-section in the dovecot.conf file I have:
global_script_path = /usr/local/etc/sieve/spam
/usr/local/etc/sieve/spam:
require fileinto;
if header :contains [Subject] [***Spam***] {
fileinto
On 26.11.2007 16:50, Matthias Kellermann wrote:
Hi list,
I'm trying to get a global sieve mailfilter with per-user sieve scripts
to work.
At the lda-section in the dovecot.conf file I have:
global_script_path = /usr/local/etc/sieve/spam
/usr/local/etc/sieve/spam:
require fileinto;
if header
On Mon, 26 Nov 2007 16:35:46 +0300, Maxim Lougovsky [EMAIL PROTECTED] wrote:
On Mon, 26 Nov 2007 15:22:29 +0200, Timo Sirainen [EMAIL PROTECTED] wrote:
On Mon, 2007-11-26 at 16:13 +0300, Maxim Lougovsky wrote:
i have installed exim with self delivery (not dovecot LDA) and just
install
Hello all!
First of all - sorry for my english. :-)
Im working now on migration from cyrus to dovecot(v1.07). Everything
work`s fine for now, but some parameters at dovecot conf a mystical for
me. :-)
dovecot-ldap.conf:
user_attrs = mail
#,homeDirectory
user_filter =
On Tue, 2007-11-13 at 14:16 -0800, Richard A Nelson wrote:
The recent addition of auth_gssapi_hostname is a welcome addition, but a
little more is needed
for multi-homed (or multi-domained) sites.
I haven't implemented Dovecot's GSSAPI code and my GSSAPI/Kerberos
knowledge is pretty limited.
No errors on Solaris 10 either (Solaris 10 NFS clients and
Solaris 10 NFS server with ZFS backing store).
- Peter
Timo Sirainen wrote:
On Thu, 2007-11-15 at 04:32 +0200, Timo Sirainen wrote:
Anyone who has NFS, could you test: http://dovecot.org/tmp/locktest.c
(did a minor update to that
On Mon, 2007-11-26 at 16:51 +0300, Maxim Lougovsky wrote:
Hmm, really strange. now bt shown other function rather previous:
..
mail# gdb ./work/dovecot-1.0.7/src/imap-login/imap-login
/tmp/imap-login.core
..
warning: exec file is newer than core file.
The core file needs to used against the
On Mon, 2007-11-26 at 16:52 +0300, Proskurin Kirill wrote:
Im working now on migration from cyrus to dovecot(v1.07).
Would you like to tell why? I'm always interested of why people are
switching away from Cyrus. :)
user_attrs = mail
#,homeDirectory
user_filter =
On Mon, 26 Nov 2007 15:59:38 +0200, Timo Sirainen [EMAIL PROTECTED] wrote:
On Mon, 2007-11-26 at 16:51 +0300, Maxim Lougovsky wrote:
Hmm, really strange. now bt shown other function rather previous:
..
mail# gdb ./work/dovecot-1.0.7/src/imap-login/imap-login
/tmp/imap-login.core
..
On Mon, 2007-11-26 at 07:46 -0600, Harrison Metzger wrote:
pass search: base=dc=beloit,dc=edu scope=subtree
filter=((objectClass=BCMailAccount)(BCMailEnable=true)(BCMailDovecotEnable=true)(uid=applesej))
fields=uid,proxy,nologin,nodelay,BCMailDovecotProxyHost
Nov 26 07:40:56 holiday dovecot:
On Mon, 2007-11-26 at 14:50 +0100, Matthias Kellermann wrote:
If a user creates his own .dovecot.sieve file the global script will not
work anymore.
How can I enable global and local per-user sieve scripts at once? Is
this possible?
Unfortunately not. Sieve plugin v1.1 (requires Dovecot
Im working on upgrading to dovecot-1.0.7 from version 1.0.3 which I
installed using yum. I backed up my init.d stuff so everything still
works. However, when I shutdown my old dovecot version and start the
new, I get an empty mailbox when logging into mail. My current config
for
Timo Sirainen wrote:
http://dovecot.org/releases/1.1/beta/dovecot-1.1.beta9.tar.gz
http://dovecot.org/releases/1.1/beta/dovecot-1.1.beta9.tar.gz.sig
Some changes since beta8:
- This release should work perfectly with NFS attribute cache enabled.
- Fixes to handling what should be written to
On Mon, 2007-11-26 at 06:20 -0800, Jeff Grossman wrote:
Timo Sirainen wrote:
http://dovecot.org/releases/1.1/beta/dovecot-1.1.beta9.tar.gz
http://dovecot.org/releases/1.1/beta/dovecot-1.1.beta9.tar.gz.sig
Some changes since beta8:
- This release should work perfectly with NFS
On Mon, 2007-11-26 at 09:17 -0500, [EMAIL PROTECTED]
wrote:
Im working on upgrading to dovecot-1.0.7 from version 1.0.3 which I
installed using yum. I backed up my init.d stuff so everything still
works. However, when I shutdown my old dovecot version and start the
new, I get an empty
I went from uw-imap to dovecot some months ago and necessary changes
to the .mailboxlist to .subscriptions. Is there a different format
for version 1.0.7?
No. There should be no changes between 1.0.3 and 1.0.7 that could cause
this. So I don't think the problem is with the version number
On Mon, 2007-11-26 at 09:32 -0500, [EMAIL PROTECTED]
wrote:
Nov 26 09:28:10 mail dovecot: IMAP(someuser):
open(/var/mail/.temp.mail.harrisonburg.k12.va.us.23157.22aab3df3f835fed)
failed: Permission denied
Nov 26 09:28:10 mail dovecot: IMAP(someuser): file_lock_dotlock()
failed with mbox
Hi Timo, Richard,
On Mon, 2007-11-26 at 15:54 +0200, Timo Sirainen wrote:
On Tue, 2007-11-13 at 14:16 -0800, Richard A Nelson wrote:
SSH recently added this enhancement to address this common need:
GSSAPIStrictAcceptorCheck
Determines whether to be strict about the
Quoting Timo Sirainen [EMAIL PROTECTED]:
On Mon, 2007-11-26 at 09:32 -0500, [EMAIL PROTECTED]
wrote:
Nov 26 09:28:10 mail dovecot: IMAP(someuser):
open(/var/mail/.temp.mail.harrisonburg.k12.va.us.23157.22aab3df3f835fed)
failed: Permission denied
Nov 26 09:28:10 mail dovecot: IMAP(someuser):
On Sun, 2007-11-25 at 20:24 +0100, Roland Hopferwieser wrote:
First I want to thank you for this great software.
Second, I think it could be a good idea to give the user the chance to
change the location for the kerberos V cache, so there is no potentially
conflict with other processes. With
I changed it so that proxy would be populated by an existing ldap attribute.
Here are what my logs show now:
Nov 26 08:42:01 holiday dovecot: auth(default): client in: AUTH 1
PLAIN service=POP3 secured lip=127.0.0.1 rip=127.0.0.1
resp=AGFwcGxlc2VqAHRhYmxl
Nov 26 08:42:01 holiday dovecot:
Ok. I got it to work. I changed this:
pass_attrs =
uid=user,cn=proxy,BCMailDovecotProxyHost=host,gidNumber=nologin,uidNumber=nodelay
By adding nologin and nodelay it seems to work. Also, I have to have each
map to a unique ldap field or it won't like that. (If people have less than
4 entries in
Timo Sirainen [EMAIL PROTECTED] writes:
SSH recently added this enhancement to address this common need:
GSSAPIStrictAcceptorCheck
Determines whether to be strict about the identity of the
GSSAPI acceptor a client authenticates
against. If “yes” then the
Timo Sirainen wrote:
Would you like to tell why? I'm always interested of why people are
switching away from Cyrus. :)
Were is a lot of people do so before me? Funny. :-)
At our system cyrus was before me, and im really don`t like it and don`t
want to learn it. Im tired of it IO system error
Nikolay Shopik schrieb:
You forgot to insert this one, where users sieve files stored.
plugin {
sieve = /var/mail/store/%u/sieve
}
Thanks for your answer Nikolay. But I think this won't do the trick.
This setting will override the global setting as well. At the moment I'm
using the default
On 26.11.2007 18:57, Matthias Kellermann wrote:
Nikolay Shopik schrieb:
You forgot to insert this one, where users sieve files stored.
plugin {
sieve = /var/mail/store/%u/sieve
}
Thanks for your answer Nikolay. But I think this won't do the trick.
This setting will override the global
This only means that it sees that auth process died, so master process
shuts down. Put something similar to src/auth/main.c instead to see if
it gets executed.
I put i_info as the first statement in auth/main.c!
This do not appear at the log, so the auth process is not executed!?!?
As far
On 26.11.2007, at 18.28, Ronny wrote:
even client_process_exec() do not comes to LPE7 the file output
is created! So it seems execv() runs the process but then stops and
do not return!
That's why I thought that the problem could be that running dovecot-
auth.exe calls some library's init
On 26.11.2007, at 18.50, Dion Hollenbeck wrote:
lip=:::192.168.1.101
Nov 26 10:26:47 parrot dovecot: POP3(hollen): UIDVALIDITY changed
(1196019076 - 1196097977) in mbox file /var/mail/hollen
I think there's a problem with mailbox autodetection. If /var/mail/
hollen file ever gets
On 26.11.2007, at 20.36, [EMAIL PROTECTED] wrote:
build errors.
solaris 9, sparc, sun studio 9 and 12.
source='base64.c' object='base64.o' libtool=no \
DEPDIR=.deps depmode=none /bin/bash ../../depcomp \
cc -DHAVE_CONFIG_H -I. -I. -I../..-I/opt/SUNWconn/crypto/include
-xjobs=4 -c
./dovecot-auth.exe
$ dovecot -n
# 1.0.7: /etc/dovecot.conf
log_path: /var/log/dovecot.log
ssl_disable: yes
disable_plaintext_auth: no
login_dir: /var/run/dovecot/login
login_executable: /usr/libexec/dovecot/imap-login
login_user: Administrator
login_chroot: no
login_process_size: 0
We're stuck on RHEL 4.x, so we're currently working on a plan to live in
harmony with .99 for another year or so. With that said, the plan is
below. Let me know if you have any other recommendations.
[ ]Convert to high-performance mode vice high-security to reduce overall
resource usage.
[
on 11/26/2007 2:19 PM Joe Allesi -X (joallesi - Coyote Creek Consulting at
Cisco) spake the following:
We're stuck on RHEL 4.x, so we're currently working on a plan to live in
harmony with .99 for another year or so. With that said, the plan is
below. Let me know if you have any other
At 11:50 AM 11/26/2007, Timo Sirainen wrote:
On 26.11.2007, at 18.50, Dion Hollenbeck wrote:
lip=:::192.168.1.101
Nov 26 10:26:47 parrot dovecot: POP3(hollen): UIDVALIDITY changed
(1196019076 - 1196097977) in mbox file /var/mail/hollen
I think there's a problem with mailbox
All,
I recently did a fresh install/setup on centos 5 to replace my older
courier-imap and all seemed to go well until today I started to notice
that it simply hangs. I use thunderbird and squirrel mail and after a
while it seems like Im simply rejected. I'm almost guessing that it has
to do
Hi Guys,
I've installed postfix + dovecot + postfixadmin + mysql in my CentOS 4.5 box
and I would like to test it using telnet however I can't telnet it using the
following syntax:
$ telnet localhost pop3
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is
It just happened again and Squirrelmail reported:
*ERROR: Connection dropped by IMAP server.
*I see no errors in /var/log/maillog and I get the same timeout
happening in squirrelmail as well as thunderbird. Please help!!!
Russ
All,
I recently did a fresh install/setup on centos 5 to
On 11/26/2007, russ ([EMAIL PROTECTED]) wrote:
dovecot-1.0-1.2.rc15.el5
This is very old - please upgrade and see if it fixes it... too many
fixes between the current version (1.0.7) and 1.0rc15 to even try to
mention...
--
Best regards,
Charles
On Mon, 2007-11-26 at 20:12 -0500, russ wrote:
It just happened again and Squirrelmail reported:
*ERROR: Connection dropped by IMAP server.
*I see no errors in /var/log/maillog and I get the same timeout
happening in squirrelmail as well as thunderbird. Please help!!!
Are you sure errors
On Mon, 2007-11-26 at 15:54 -0700, Dion Hollenbeck wrote:
At 11:50 AM 11/26/2007, Timo Sirainen wrote:
On 26.11.2007, at 18.50, Dion Hollenbeck wrote:
lip=:::192.168.1.101
Nov 26 10:26:47 parrot dovecot: POP3(hollen): UIDVALIDITY changed
(1196019076 - 1196097977) in mbox file
Yes. I looked all through the log file and saw nothing, which is what makes
this so painfully annoying. I guess I have to find a more up to date RPM.
Russ
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: Timo Sirainen [EMAIL PROTECTED]
Date: Tue, 27 Nov 2007 04:52:48
On Mon, 2007-11-12 at 12:04 +0100, Paweł Panek wrote:
#0 0xac4d006a in quota_mailbox_transaction_commit (ctx=0x80f3978, flags=0)
at quota-storage.c:75
75 if (qt-tmp_mail != NULL)
(gdb) bt full
I uploaded http://dovecot.org/patches/1.0/quota-rewrite-1.0.8.diff which
Charles Marcus wrote:
On 11/26/2007, russ ([EMAIL PROTECTED]) wrote:
dovecot-1.0-1.2.rc15.el5
This is very old - please upgrade and see if it fixes it... too many
fixes between the current version (1.0.7) and 1.0rc15 to even try to
mention...
I just upgraded to the 1.0.7 rpm from
jan gestre wrote:
-ERR Authentication failed.
I've also telnet it using imap to no avail.
Is there another way to do this?
Well, my first guess would be you haven't enabled plain text passwords on
unencrypted links.
By default, Dovecot doesn't allow plain text passwords without SSL.
Nikolay Shopik schrieb:
On 26.11.2007 18:57, Matthias Kellermann wrote:
Nikolay Shopik schrieb:
You forgot to insert this one, where users sieve files stored.
plugin {
sieve = /var/mail/store/%u/sieve
}
Thanks for your answer Nikolay. But I think this won't do the trick.
This setting
67 matches
Mail list logo