On Wed, May 17, 2017 at 05:25:14PM +0300, Jani Nikula wrote:
> Switch to using the common DP helpers instead of using our own.
>
> Signed-off-by: Jani Nikula
Forgot to remove struct intel_dp_desc, otherwise lgtm.
Reviewed-by: Daniel Vetter
> ---
On Wed, May 17, 2017 at 05:25:16PM +0300, Jani Nikula wrote:
> The Analogix 7737 DP to HDMI converter requires reduced M and N values
> when to operate correctly at HBR2. Detect this IC by its OUI value of
> 0x0022B9 via the DPCD quirk list.
Commit message is a bit confusing since this sounds
Am 18.05.2017 um 06:43 schrieb Masahiro Yamada:
Use <...> notation to include headers located in include/linux.
While we are here, tweak the includes order a bit to sort them
alphabetically.
Signed-off-by: Masahiro Yamada
Reviewed-by: Christian König
On 18 May 2017 at 02:14, Ben Widawsky wrote:
> On 17-05-17 01:20:50, Emil Velikov wrote:
>>
>> Hi Ben,
>>
>> A couple of small questions/suggestions that I hope you find useful.
>> Please don't block any of this work based on my comments.
>>
>> On 16 May 2017 at 22:31, Ben
On Wed, May 17, 2017 at 05:50:45PM +0800, Chen-Yu Tsai wrote:
> On Wed, May 17, 2017 at 3:40 PM, Maxime Ripard
> wrote:
> > It appears that the total vertical resolution needs to be doubled when
> > we're not in interlaced. Make sure that is the case.
> >
> >
Hi Rob,
On 18 May 2017 at 02:39, Robert Foss wrote:
> Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI
> as a convenience.
>
> Ideally the DRM_ROTATE_ and DRM_REFLECT_ property ids are looked up
> through the atomic API, but realizing that userspace is
On 18 May 2017 at 01:46, Ben Widawsky wrote:
>>> + blob_size += modifiers_size;
>>> +
>>> + blob = drm_property_create_blob(dev, blob_size, NULL);
>>> + if (IS_ERR(blob))
>>> + return -1;
>>> +
>>
>> Maybe propagate the exact error... Hmm we
On Wed, May 17, 2017 at 09:39:11PM -0400, Robert Foss wrote:
> +/*
> + * DRM_MODE_REFLECT_
> + *
> + * Signals that the contents of a drm plane has been reflected in
> + * the axis.
Still vague.
Also you didn't respond to my comment about the use of past tense.
> + *
> + * This define is
Am 17.05.2017 20:13, schrieb Colin King:
> From: Colin Ian King
>
> The current for loop decrements i when it is zero and this causes
> a wrap-around back to ~0 because i is unsigned. In the unlikely event
> that mask is 0, the loop will run forever. Fix this so we
Hi,
On 05/17/2017 12:16 AM, Eric Anholt wrote:
Laurent Pinchart writes:
Hi Eric,
On Tuesday 16 May 2017 09:47:49 Eric Anholt wrote:
Rob Herring writes:
On Mon, May 15, 2017 at 7:03 PM, Eric Anholt wrote:
Laurent
On Wed, May 17, 2017 at 05:46:18PM -0700, Ben Widawsky wrote:
> On 17-05-17 01:06:16, Emil Velikov wrote:
> >Hi Ben,
> >
> >On 16 May 2017 at 22:31, Ben Widawsky wrote:
> >> Updated blob layout (Rob, Daniel, Kristian, xerpi)
> >>
> >> v2:
> >> * Removed __packed, and alignment
Am 17.05.2017 um 14:23 schrieb Michal Hocko:
As it turned out my allyesconfig on x86_64 wasn't sufficient and 0day
build machinery found a failure on arm architecture. It was clearly a
typo. Now I have pushed this to my build battery with cross arch
compilers and it passes so there shouldn't
On Wed, May 17, 2017 at 11:08:23PM +0200, Nicolai Stange wrote:
> I'm experiencing a boot failure on next-20170515:
>
> BUG: unable to handle kernel NULL pointer dereference at 07cb
> IP: radeon_driver_load_kms+0xeb/0x230 [radeon]
[snip]
> Bisection lead to commit 7ffb0ce31cf9
On Wed, May 17, 2017 at 05:26:14PM -0700, Ben Widawsky wrote:
> On 17-05-17 11:17:57, Liviu Dudau wrote:
> > On Tue, May 16, 2017 at 02:31:24PM -0700, Ben Widawsky wrote:
> > > This is the plumbing for supporting fb modifiers on planes. Modifiers
> > > have already been introduced to some extent,
Hi Tomi,
On Thursday 18 May 2017 14:14:35 Tomi Valkeinen wrote:
> On 18/05/17 13:59, Laurent Pinchart wrote:
> > On Thursday 18 May 2017 13:28:26 Tomi Valkeinen wrote:
> >> omap_gem uses page alignment for buffer stride. The related calculations
> >> are a bit off, though, as byte stride of 4096
On Thu, May 18, 2017 at 02:14:35PM +0300, Tomi Valkeinen wrote:
> On 18/05/17 13:59, Laurent Pinchart wrote:
> > Hi Tomi,
> >
> > Thank you for the patch.
> >
> > On Thursday 18 May 2017 13:28:26 Tomi Valkeinen wrote:
> >> omap_gem uses page alignment for buffer stride. The related calculations
On 18/05/17 14:25, Laurent Pinchart wrote:
> Hi Tomi,
>
> On Thursday 18 May 2017 14:14:35 Tomi Valkeinen wrote:
>> On 18/05/17 13:59, Laurent Pinchart wrote:
>>> On Thursday 18 May 2017 13:28:26 Tomi Valkeinen wrote:
omap_gem uses page alignment for buffer stride. The related calculations
On Wednesday, 2017-05-17 17:56:40 -0700, Eric Anholt wrote:
> While debugging an X11 display failure, I wanted to see where we were
> actually scanning out from. This is probably generally useful to
> others that might be working on this device.
>
> Signed-off-by: Eric Anholt
>
On Wed, 17 May 2017, Clint Taylor wrote:
> On 05/17/2017 07:25 AM, Jani Nikula wrote:
>> Face the fact, there are Display Port sink and branch devices out there
>> in the wild that don't follow the Display Port specifications, or they
>> have bugs, or just otherwise
Hi Tomi,
Thank you for the patch.
On Thursday 18 May 2017 13:28:26 Tomi Valkeinen wrote:
> omap_gem uses page alignment for buffer stride. The related calculations
> are a bit off, though, as byte stride of 4096 gets aligned to 8192,
> instead of 4096. This patch fixes those calculations.
>
>
Update on [1].
BR,
Jani.
[1] cover.1495030890.git.jani.nikula@intel.com">http://mid.mail-archive.com/cover.1495030890.git.jani.nikula@intel.com
Jani Nikula (4):
drm/dp: add helper for reading DP sink/branch device desc from DPCD
drm/i915: use drm DP helper to read DPCD desc
drm/dp:
The Analogix 7737 DP to HDMI converter requires reduced M and N values
when to operate correctly at HBR2. We tried to reduce the M/N values for
all devices in commit 9a86cda07af2 ("drm/i915/dp: reduce link M/N
parameters"), but that regressed some other sinks. Detect this IC by its
OUI value of
Face the fact, there are Display Port sink and branch devices out there
in the wild that don't follow the Display Port specifications, or they
have bugs, or just otherwise require special treatment. Start a common
quirk database the drivers can query based on the DP device
identification. At least
Switch to using the common DP helpers instead of using our own.
v2: also remove leftover struct intel_dp_desc (Daniel)
Reviewed-by: Daniel Vetter
Signed-off-by: Jani Nikula
---
drivers/gpu/drm/i915/intel_dp.c | 37
Reviewed-by: Daniel Vetter
Signed-off-by: Jani Nikula
---
drivers/gpu/drm/drm_dp_helper.c | 35 +++
include/drm/drm_dp_helper.h | 19 +++
2 files changed, 54 insertions(+)
diff --git
On 18/05/17 13:59, Laurent Pinchart wrote:
> Hi Tomi,
>
> Thank you for the patch.
>
> On Thursday 18 May 2017 13:28:26 Tomi Valkeinen wrote:
>> omap_gem uses page alignment for buffer stride. The related calculations
>> are a bit off, though, as byte stride of 4096 gets aligned to 8192,
>>
On Wed, May 17, 2017 at 09:39:11PM -0400, Robert Foss wrote:
> Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI
> as a convenience.
>
> Ideally the DRM_ROTATE_ and DRM_REFLECT_ property ids are looked up
> through the atomic API, but realizing that userspace is likely to take
>
Hi Dave, drm/i915 fixes for v4.12-rc2.
BR,
Jani.
The following changes since commit 2ea659a9ef488125eb46da6eb571de5eae5c43f6:
Linux 4.12-rc1 (2017-05-13 13:19:49 -0700)
are available in the git repository at:
git://anongit.freedesktop.org/git/drm-intel tags/drm-intel-fixes-2017-05-18-1
omap_gem uses page alignment for buffer stride. The related calculations
are a bit off, though, as byte stride of 4096 gets aligned to 8192,
instead of 4096. This patch fixes those calculations.
Signed-off-by: Tomi Valkeinen
---
drivers/gpu/drm/omapdrm/omap_gem.c | 4 ++--
On 17 May 2017 at 19:16, Eric Engestrom wrote:
> On Wednesday, 2017-05-17 13:58:42 +, Yu, Qiang wrote:
>> Hi Emil,
>>
>> I didn't modify the code. I'm using Ubuntu 14.04 gcc 4.8.4, the configure
>> pass but
>> fail when compile.
>>
>> I think my gcc support c99 but
On Thu, May 18, 2017 at 10:16:38AM +0200, Christian König wrote:
> Am 17.05.2017 um 14:23 schrieb Michal Hocko:
> > As it turned out my allyesconfig on x86_64 wasn't sufficient and 0day
> > build machinery found a failure on arm architecture. It was clearly a
> > typo. Now I have pushed this to my
On 20.03.2017 21:44, Mikko Perttunen wrote:
> This is largely a rewrite of the Host1x channel allocation
> code in channel.c, bringing several changes:
>
> - The previous code could deadlock due to an interaction
> between the 'reflock' mutex and CDMA timeout handling.
> This gets rid of the
From: Kuninori Morimoto
ALSA SoC needs to know connected DAI ID for probing.
It is not a big problem if device/driver was only for sound,
but getting DAI ID will be difficult if device includes both
Video/Sound, like HDMI.
To solve this issue, this patch adds
With the include directives under include/drm/ fixed, this flag is
no longer needed.
Signed-off-by: Masahiro Yamada
---
Changes in v3: None
drivers/gpu/drm/udl/Makefile | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/gpu/drm/udl/Makefile
With the include directives under include/drm/ fixed, this flag is
no longer needed.
Signed-off-by: Masahiro Yamada
---
Changes in v3: None
drivers/gpu/drm/gma500/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/gma500/Makefile
Hi Mark, Archit
These supports HDMI sound for Codec.
Now, SYNOPSYS dw-hdmi-i2s-audio driver is supporting HDMI I2S
and is using hdmi-codec driver.
Now, ALSA SoC supports OF-graph DT style, this means V4L2/ALSA SoC
can share same DT bindings.
But 1 issue is that ALSA SoC side needs to adjust port
With the include directives under include/drm/ fixed, this flag is
no longer needed.
Signed-off-by: Masahiro Yamada
---
Changes in v3: None
drivers/gpu/drm/savage/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/savage/Makefile
From: Kuninori Morimoto
ALSA SoC needs to know connected DAI ID for detecting.
It is not a big problem if device/driver was only for sound,
but getting DAI ID will be difficult if device includes both
Video/Sound, like HDMI.
To solve this issue, this patch adds
Use <...> notation to include headers located in include/linux.
While we are here, tweak the includes order a bit to sort them
alphabetically.
Signed-off-by: Masahiro Yamada
---
drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c| 4 ++--
On 18.05.2017 14:55, Mikko Perttunen wrote:
> On 18.05.2017 14:42, Dmitry Osipenko wrote:
>> On 20.03.2017 21:44, Mikko Perttunen wrote:
>>> ...
>>> struct host1x_channel *host1x_channel_request(struct device *dev)
>>> {
>>> struct host1x *host = dev_get_drvdata(dev->parent);
>>> +
On 18.05.2017 14:42, Dmitry Osipenko wrote:
On 20.03.2017 21:44, Mikko Perttunen wrote:
...
struct host1x_channel *host1x_channel_request(struct device *dev)
{
struct host1x *host = dev_get_drvdata(dev->parent);
+ struct host1x_channel_list *chlist = >channel_list;
Include instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.
Signed-off-by: Masahiro Yamada
---
Changes in v3: None
drivers/gpu/drm/vmwgfx/Makefile | 3 ---
drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf.c | 3 ++-
https://bugs.freedesktop.org/show_bug.cgi?id=100437
--- Comment #8 from Öyvind Saether ---
Motherboard: MSI-A88X-G45-GAMING
APU: AMD A8-7600
Graphics card: MSI RX 470 8GB
Kernel: 4.11.0-2.fc26.x86_64
Screens: 3 (1080 1440 1080)
I can confirm that on cold boot I too get
2017-05-11 5:51 GMT+03:00 Michel Dänzer :
> On 11/05/17 04:33 AM, Tommi Rantala wrote:
>> Complete kernel log:
>> http://termbin.com/dzy5
>>
>> [ 249.952546] [ cut here ]
>> [ 249.952593] WARNING: CPU: 5 PID: 0 at
>>
On 18/05/2017 at 14:35:21 +0200, Boris Brezillon wrote:
> drm_of_find_panel_or_bridge() is expecting np to point to the encoder
> node, not the bridge or panel this encoder is feeding.
> Moreover, the endpoint parameter passed to drm_of_find_panel_or_bridge()
> is always set to zero, which
Em Fri, 5 May 2017 16:21:10 +0100
Kieran Bingham escreveu:
> Currently we process page flip events on every display interrupt,
> however this does not take into consideration the processing time needed
> by the VSP1 utilised in the pipeline.
>
>
Hi Daniel,
2017-05-17 21:40 GMT+09:00 Daniel Vetter :
> On Mon, Apr 24, 2017 at 01:50:33PM +0900, Masahiro Yamada wrote:
>> Include instead of relative path from include/drm, then
>> remove the -Iinclude/drm compiler flag.
>>
>> While we are here, use <...> instead of "..." for
With the include directives under include/drm/ fixed, this flag is
no longer needed.
Signed-off-by: Masahiro Yamada
---
Changes in v3: None
drivers/gpu/drm/tdfx/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/tdfx/Makefile
With the include directives under include/drm/ fixed, this flag is
no longer needed.
Signed-off-by: Masahiro Yamada
---
Changes in v3: None
drivers/gpu/drm/i2c/Makefile | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/gpu/drm/i2c/Makefile
With the include directives under include/drm/ fixed, this flag is
no longer needed.
Signed-off-by: Masahiro Yamada
---
Changes in v3: None
drivers/gpu/drm/r128/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/r128/Makefile
With the include directives under include/drm/ fixed, this flag is
no longer needed.
Signed-off-by: Masahiro Yamada
---
Changes in v3: None
drivers/gpu/drm/omapdrm/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/omapdrm/Makefile
Add COMPILE_TEST for the compilation test coverage.
Signed-off-by: Masahiro Yamada
---
drivers/gpu/drm/stm/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/stm/Kconfig b/drivers/gpu/drm/stm/Kconfig
index 2c4817f..722ad11
With the include directives under include/drm/ fixed, this flag is
no longer needed.
Signed-off-by: Masahiro Yamada
---
Changes in v3: None
drivers/gpu/drm/vgem/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/vgem/Makefile
vmwgfx part: Reviewed-by: Sinclair Yeh
On Wed, May 17, 2017 at 09:39:11PM -0400, Robert Foss wrote:
> Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI
> as a convenience.
>
> Ideally the DRM_ROTATE_ and DRM_REFLECT_ property ids are looked up
> through the atomic
Include instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.
While we are here, use <...> instead of "..." for include/linux/*.h
and include/sound/*.h headers too.
Signed-off-by: Masahiro Yamada
---
Changes in v3:
- Rebase
Many Makefiles needed to add -Iinclude/drm as an include path,
but the right thing to do is to include headers in the form
#include
This series fixes the source files, then rip off -Iinclude/drm flags.
V3: rebased on commit bb2af9bda33 (drm-misc-next)
Masahiro Yamada (16):
drm/vc4: fix
With the include directives under include/drm/ fixed, this flag is
no longer needed.
Signed-off-by: Masahiro Yamada
---
Changes in v3: None
drivers/gpu/drm/mga/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/mga/Makefile
With the include directives under include/drm/ fixed, this flag is
no longer needed.
Signed-off-by: Masahiro Yamada
---
Changes in v3: None
drivers/gpu/drm/sis/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/sis/Makefile
Reviewed-by: Eric Huang
On 2017-05-16 10:42 AM, Dan Carpenter wrote:
Smatch complains about a signedness bug here:
vega10_hwmgr.c:4202 vega10_force_clock_level()
warn: always true condition '(i >= 0) => (0-u32max >= 0)'
Fixes: 7b52db39a4c2
From: Kuninori Morimoto
ALSA SoC needs to know connected DAI ID for detecting.
It is not a big problem if device/driver was only for sound,
but getting DAI ID will be difficult if device includes both
Video/Sound, like HDMI.
To solve this issue, this patch adds
From: Kuninori Morimoto
ALSA SoC needs to know connected DAI ID for probing.
It is not a big problem if device/driver was only for sound,
but getting DAI ID will be difficult if device includes both
Video/Sound, like HDMI.
To solve this issue, this patch adds
With the include directives under include/drm/ fixed, this flag is
no longer needed.
Signed-off-by: Masahiro Yamada
---
Changes in v3: None
drivers/gpu/drm/i810/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/i810/Makefile
From: Kuninori Morimoto
DesignWare HDMI driver (= dw-hdmi) is supporting HDMI sound, and its
probe function was calling sound binding function multiple times as
same HDMI device different port.
Because of this behavior, commit 9731f82d601 ("ASoC: hdmi-codec:
With the include directives under include/drm/ fixed, this flag is
no longer needed.
Signed-off-by: Masahiro Yamada
---
Changes in v3: None
drivers/gpu/drm/stm/Makefile | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/gpu/drm/stm/Makefile
Include instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.
Signed-off-by: Masahiro Yamada
---
Changes in v3: None
drivers/gpu/drm/virtio/Makefile | 2 --
drivers/gpu/drm/virtio/virtgpu_debugfs.c | 2 +-
With the include directives under include/drm/ fixed, this flag is
no longer needed.
Signed-off-by: Masahiro Yamada
---
Changes in v3: None
drivers/gpu/drm/via/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/via/Makefile
https://bugs.freedesktop.org/show_bug.cgi?id=101029
--- Comment #21 from Jan Vesely ---
I have the same problem on carrizo+iceland nb (reported at [0,1]).
I can confirm that the linked patch applied on top of 4.10.x fixes boot, and
the machine can run 3d applications
On Thu, May 18, 2017 at 2:56 AM, Eric Anholt wrote:
> While debugging an X11 display failure, I wanted to see where we were
> actually scanning out from. This is probably generally useful to
> others that might be working on this device.
>
> Signed-off-by: Eric Anholt
Hi Archit,
On Thursday 18 May 2017 13:56:19 Archit Taneja wrote:
> On 05/17/2017 12:16 AM, Eric Anholt wrote:
[snip]
> > In terms of physical connections:
> >[15-pin "DSI" connector on 2835]
> >
> > | I2C | DSI
> >
> >/ \SPI |
> >
> > [TS]
On 18 May 2017 at 14:46, Emil Velikov wrote:
> On 18 May 2017 at 13:47, Eric Engestrom wrote:
>
>>> > Yes, I think you should change your build command. It's a shame that
>>> > autotools has this bug, but we'd like to avoid changing our
On 05/18/2017 04:10 AM, Jani Nikula wrote:
Face the fact, there are Display Port sink and branch devices out there
in the wild that don't follow the Display Port specifications, or they
have bugs, or just otherwise require special treatment. Start a common
quirk database the drivers can query
https://bugs.freedesktop.org/show_bug.cgi?id=99851
--- Comment #30 from erhar...@mailbox.org ---
The same problem on my machine:
# dmesg | grep -i drm
[ 11.753729] [drm] radeon kernel modesetting enabled.
[ 11.760535] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9
0x1787:0x2291
Hi Dave,
2 fixes for you, one fixes a link error that seems to have been lurking for a
while, but aggrevated by rc1. The second patch fixes a bug introduced in the
find_panel_or_bridge cleanup set.
drm-misc-fixes-2017-05-18:
Driver Changes:
- host1x: Fix link error when host1x is built-in and
Gentle ping on this.
Thanks,
Liviu
Hi Dave,
I'm not sure what is the best tree to target this, probably v4.12-rc1 if it
is too late to make it into the pull request for this merge window. Just a
patch that has been in linux-next for a very long time due to lack of feedback
and me going on
On Thu, May 18, 2017 at 02:39:42PM +0100, Colin King wrote:
> From: Colin Ian King
>
> There are two occasions where pointer B is being check for a NULL
> when it should be pointer C instead. Fix these.
>
> Detected by CoverityScan, CID#1436348,1436349 ("Logically Dead
On Thursday, 2017-05-18 12:10:31 +0100, Emil Velikov wrote:
> On 17 May 2017 at 19:16, Eric Engestrom wrote:
> > On Wednesday, 2017-05-17 13:58:42 +, Yu, Qiang wrote:
> >> Hi Emil,
> >>
> >> I didn't modify the code. I'm using Ubuntu 14.04 gcc 4.8.4, the configure
Hi Eric,
On Tuesday 16 May 2017 11:46:36 Eric Anholt wrote:
[snip]
> In terms of physical connections:
>
>[15-pin "DSI" connector on 2835]
>
> | I2C | DSI
>/ \SPI |
> [TS] [Atmel]--[TC358762]
>\|
> \PWM|
On Thu, Apr 20, 2017 at 09:47:35AM +0300, Mikko Perttunen wrote:
> Ah, had to forget something :)
>
> Reviewed-by: Mikko Perttunen
Applied to -misc-fixes, thank you
Sean
>
> On 19.04.2017 21:24, Arnd Bergmann wrote:
> > When IOMMU_IOVA is not built-in but host1x is,
On Thu, May 18, 2017 at 02:43:07PM +0200, Alexandre Belloni wrote:
> On 18/05/2017 at 14:35:21 +0200, Boris Brezillon wrote:
> > drm_of_find_panel_or_bridge() is expecting np to point to the encoder
> > node, not the bridge or panel this encoder is feeding.
> > Moreover, the endpoint parameter
On 18 May 2017 at 13:47, Eric Engestrom wrote:
>> > Yes, I think you should change your build command. It's a shame that
>> > autotools has this bug, but we'd like to avoid changing our codebase to
>> > work around these, and in this case, it would mean dropping the
https://bugs.freedesktop.org/show_bug.cgi?id=101029
--- Comment #22 from Craig ---
in that case, when will this patch be applied permanently in a kernel versus
having to use the patch? I will be attempting to apply the patch soon and
verify as well on the Ubuntu side.
--
Signed-off-by: Jeff Smith
---
All of the encoder_info_frame's info packets are initialized to invalid
in resource_build_info_frame except for spd. This appears to be simply
an oversight.
drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 1 +
1 file changed, 1 insertion(+)
Nicolai Stange reports the following oops which is caused by
dereferencing rdev->pdev before it's subsequently set by
radeon_device_init(). Fix it.
BUG: unable to handle kernel NULL pointer dereference at 07cb
IP: radeon_driver_load_kms+0xeb/0x230 [radeon]
PGD 0
P4D 0
There is no reason why the name field should not be const, but
several why it should. The struct should only be used by
drm_property_create_enum() and there the name-field from the struct
is passed to drm_property_add_enum(), which takes a const char * as
a parameter.
Signed-off-by: Jyri Sarha
This fixes the DRM_IOCTL_MODE_GETFB ioctl for cirrus so that it
returns an actual handle instead of failing with ENODEV.
Tested in a QEMU VM with "-vga cirrus" by running this script:
https://chromium.googlesource.com/chromiumos/third_party/autotest/+/master/client/bin/screenshot.py
Philippe CORNU writes:
> Add the bridge support, used by DSI host and HDMI/LVDS bridges.
>
> Signed-off-by: Philippe CORNU
> @@ -987,19 +1024,36 @@ static struct drm_panel *ltdc_get_panel(struct
> drm_device *ddev)
>
> port =
From: Ville Syrjälä
drm_atomic_set_mode_for_crtc() doesn't modify the passed mode, so let's
make it const.
Signed-off-by: Ville Syrjälä
---
drivers/gpu/drm/drm_atomic.c | 2 +-
include/drm/drm_atomic.h | 2 +-
2 files changed,
From: Ville Syrjälä
Make the mode used for load detection const, and adjust all relevant
functions to accept a const mode.
Signed-off-by: Ville Syrjälä
---
drivers/gpu/drm/i915/intel_display.c | 12 ++--
Changes since v3 RFC version:
- Add: "drm: Add const to name field declaration in struct drm_prop_enum_list"
- Fix typos found by Eric Engestrom
- Restructure kernel doc
- Add consts to name sting tables
- Loop variables from unsigned to signed int
- Use len variable to index temporary
Add a standard optional properties to support different non RGB color
encodings in DRM planes. COLOR_ENCODING select the supported non RGB
color encoding, for instance ITU-R BT.709 YCbCr. COLOR_RANGE selects
the value ranges within the selected color encoding. The properties
are stored to
Now that we have a callback to check if bridge supports a given mode
we can use it in Synopsys Designware HDMI bridge so that we restrict
the number of probbed modes to the ones we can actually display.
Also, there is no need to use mode_fixup() callback as mode_valid()
will handle the mode
This fixes the DRM_IOCTL_MODE_GETFB ioctl for cirrus so that it
returns an actual handle instead of failing with ENODEV.
Tested in a QEMU VM with "-vga cirrus" by running this script:
https://chromium.googlesource.com/chromiumos/third_party/autotest/+/master/client/bin/screenshot.py
https://bugzilla.kernel.org/show_bug.cgi?id=195321
--- Comment #3 from Jimi (jimijames.b...@gmail.com) ---
Hello? I still can't upgrade my kernel until this gets fixed.
--
You are receiving this mail because:
You are watching the assignee of the bug.
On 05/08, Eric Anholt wrote:
> This is required for the panel to work on bcm911360, where CLCDCLK is
> the fixed 200Mhz AXI41 clock. The rate set is still passed up to the
> CLCDCLK, for platforms that have a settable rate on that one.
>
> v2: Set SET_RATE_PARENT (caught by Linus Walleij),
Now that we have a callback to check if crtc supports a given mode
we can use it in arcpgu so that we restrict the number of probbed
modes to the ones we can actually display.
This is specially useful because arcpgu crtc is responsible to set
a clock value in the commit() stage but unfortunatelly
This series is a follow up from the discussion at [1]. We start by
introducing crtc->mode_valid(), encoder->mode_valid() and
bridge->mode_valid() callbacks which will be used in followup
patches and also by cleaning the documentation a little bit. This
patch is available at [2] and the series
This changes the connector probe helper function to use the new
encoder->mode_valid(), bridge->mode_valid() and crtc->mode_valid()
helper callbacks to validate the modes.
The new callbacks are optional so the behaviour remains the same
if they are not implemented. If they are, then the code loops
Now that we have a callback to check if bridge supports a given mode
we can use it in Analogix bridge so that we restrict the number of
probbed modes to the ones we can actually display.
Also, there is no need to use mode_fixup() callback as mode_valid()
will handle the mode validation.
NOTE:
Now that we have a callback to check if crtc supports a given mode
we can use it in malidp so that we restrict the number of probbed
modes to the ones we can actually display.
Also, remove the mode_fixup() callback as this is no longer needed
because mode_valid() will be called before.
NOTE: Not
From: Wei Yongjun
Fix the return value check which testing the wrong variable.
Signed-off-by: Wei Yongjun
---
drivers/gpu/drm/i915/selftests/i915_sw_fence.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git
1 - 100 of 133 matches
Mail list logo