On Wed, Feb 22, 2012 at 4:34 PM, Guy wrote:
> I did "discover" a 3rd method under Labels>Clear Print Flags which did
> change all my qso's to Label = N which is what I wanted. You can also use
> this function with a QSO filter "active" for a subset of your log.
There is no "Labels" menu that I
Thanks guys for the suggestions. I did change File>Preferences>QSO
defaults to "None" and saved the .ini file so all future uploads will have
the Flag set to "None" per Jim's suggestions.
I did "discover" a 3rd method under Labels>Clear Print Flags which did
change all my qso's to Label = N which
[re-posted with permission]
=
*** The Daily DX (TM) ***
=
Volume 16 Number 038
February 22, 2012
Editor/Publisher Bernie Mc
Jim (et al),
Yes, Jim and I have exchanged email about the CI-V protocol and his efforts
to tame the PW1. As I understand it, K9JM's (www.k9jm.com) device is a piece
of hardware, running custom software developed by Jim, that breaks the CI-V
bus into segments and isolates traffic to the PC, the
Select Hygn DCU1.
73, John
K9EL
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Sam Leslie -- W4PK
Sent: Wednesday, February 22, 2012 8:11 AM
To: dx4win@mailman.qth.net
Cc: j...@k9jm.com
Subject: [Dx4win] Idiom Press Controller c
On Wed, Feb 22, 2012 at 6:59 AM, Sam Leslie -- W4PK wrote:
> I am happy to report that Jim's CIV router now works with DX4WIN!!!
>
> It turned out that DX4WIN expects to see an echo of its commands whereas
> N1MM and other logging programs do not. It was a simple matter for Jim to
> enable echoi
On Wed, Feb 22, 2012 at 7:37 AM, Guy wrote:
> I use N1MM a lot for contesting, dxpeditions, etc. When I import the .adif
> file from N1MM into DX4WIN 7.0, the Label flag is set to "Y" for all qsos.
This is a function of your QSO preferences. In 8.0x, look for the
box at the top that says, "La
I use Jim's (AD1C) ADIF to DX4Win converter and it gives you a check box for
setting label, yes or no.
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
serv...@satnetmaine.com
www.satnetmaine.com
From: Guy
To: dx4win@mailman.qth.net
Sent: Wednesday, February 22, 2012 9:
GM folks,
I use N1MM a lot for contesting, dxpeditions, etc. When I import the .adif
file from N1MM into DX4WIN 7.0, the Label flag is set to "Y" for all qsos.
I want to change this Label flag to "N" for all qsos. I looked at the
"Global Editing" for Multiple QSOs" manual section but the Label f
Hello all, Jim K9JM was wondering if his Idiom Press controller can be
programmed for control by DX4WIN? I looked at the pull-down list for
antenna controllers but I did not see it. But I suspect that Idiom Press is
compatible with one of the rotators that are already listed. He uses that
contro
I am happy to report that Jim's CIV router now works with DX4WIN!!!
It turned out that DX4WIN expects to see an echo of its commands whereas
N1MM and other logging programs do not. It was a simple matter for Jim to
enable echoing and he has already implemented that change into his software.
His
11 matches
Mail list logo