Re: [Dx4win] support for the new Kenwood TS-990
On Sun, Apr 7, 2013 at 10:31 PM, ON4AOI on4...@skynet.be wrote: There can´t be any support for the FT3000 rig file Not from me or Paul or anyone else. YAESU left OUT the cat commands for VFO-B and related Mode So as long there are no commands in the ft3000 firmware It is impossible So why can't there be a driver that treats the radio like it only has one VFO? The ability to read the current VFO and assume simplex operation is better than nothing, right? -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] support for the new Kenwood TS-990
Guy and Jimand Paul (if you are listening) For the FT3K, this would probably workI've been trying to get Paul's attention since before he moved to incorporate that in the DX4WIN code... RC; -Clear Clarifier MD00; -Set Mode VFO A AB; - Let A =B FT1; FR0; -Set Split Set FA;- Set A frequency Set FB;- Set B frequency So even if you can't set VFO B's mode, set A mode firstthen let A=B...what ever was in the A mode goes into the B mode...then set up your split... This 'should' work(famous last words!)... 73/ Regards Lou N2TU On 4/8/2013 9:54 AM, Jim Reisert AD1C wrote: On Sun, Apr 7, 2013 at 10:31 PM, ON4AOI on4...@skynet.be wrote: There can´t be any support for the FT3000 rig file Not from me or Paul or anyone else. YAESU left OUT the cat commands for VFO-B and related Mode So as long there are no commands in the ft3000 firmware It is impossible So why can't there be a driver that treats the radio like it only has one VFO? The ability to read the current VFO and assume simplex operation is better than nothing, right? -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] support for the new Kenwood TS-990
This radio 'stuff' is easy to try; especially when you have the radio connected to your computer. The .rig file is a fairly simple text file that is interpreted by the DX4WIN program. Look at the rig file for the Yaesu ft-1000D; there we set the A VFO (mode, frequency split etc) Copy from A to B, and repeat for the A VFO again. The program 'likes' this sequence when the A-B command is available because it is so simple! --Paul, KK4HD On Mon, Apr 8, 2013 at 10:05 AM, Lou Dietrich n...@roadrunner.com wrote: Guy and Jimand Paul (if you are listening) For the FT3K, this would probably workI've been trying to get Paul's attention since before he moved to incorporate that in the DX4WIN code... RC; -Clear Clarifier MD00; -Set Mode VFO A AB; - Let A =B FT1; FR0; -Set Split Set FA;- Set A frequency Set FB;- Set B frequency So even if you can't set VFO B's mode, set A mode firstthen let A=B...what ever was in the A mode goes into the B mode...then set up your split... This 'should' work(famous last words!)... 73/ Regards Lou N2TU On 4/8/2013 9:54 AM, Jim Reisert AD1C wrote: On Sun, Apr 7, 2013 at 10:31 PM, ON4AOI on4...@skynet.be wrote: There can´t be any support for the FT3000 rig file Not from me or Paul or anyone else. YAESU left OUT the cat commands for VFO-B and related Mode So as long there are no commands in the ft3000 firmware It is impossible So why can't there be a driver that treats the radio like it only has one VFO? The ability to read the current VFO and assume simplex operation is better than nothing, right? -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __**__**__ DX4WIN mailing list Home: http://mailman.qth.net/**mailman/listinfo/dx4winhttp://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.**htmhttp://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __**__**__ DX4WIN mailing list Home: http://mailman.qth.net/**mailman/listinfo/dx4winhttp://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.**htmhttp://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- ~ DX4WIN logging software Paul van der Eijk, KK4HD BrookHill Data Systems LLC http://www.dx4win.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] support for the new Kenwood TS-990
Jim, I can rename the FTDX5000 to FTDX3000 and send to you, But that doesn´t change the fact if you double click on a spot With SPLIT that THE MODE in VFOB is not correct. There is no mode cmd for a second VFO available because there is no Second VFO in the FTDX3000 its only a second stack From my previous posting MODE command Cat manual page 12 FTDX5000 shows P1 0: main (VFO-A) P1:1: sub (VFO-B) FTDX5000 cmd = MD0; = in this case reads mode from VFO-A FTDX5000 cmd = MD1; = in this case reads mode from VFO-B For setting the modes on FTDX5000 its something similar FTDX5000 cmd = MD01; = in this case sets mode from VFO-A to LSB FTDX5000 cmd = MD11; = in this case sets mode from VFO-B to LSB First number is for the VFO selection and second number(or letter not yet supported by dx4win) for the mode. Page 11 from the FTDX 3000 CAT manual shows now a BIG PROBLEM P1 = 0:fixed Yaesu claims now also like Icom is doing over the years that there are not 2 VFO´s Because there are not 2 receivers but only one inside the radio for them its only a second VFO A with different stack and not a real VFO B Maybe with the cmd AB -- VFO A to VFO´A´(vfoB) it could work but Need a radio here to test that out before any release Guy -Oorspronkelijk bericht- Van: jjreis...@gmail.com [mailto:jjreis...@gmail.com] Namens Jim Reisert AD1C Verzonden: maandag 8 april 2013 15:55 Aan: ON4AOI CC: j...@w9rpm.com; DX4WIN Reflector Onderwerp: Re: [Dx4win] support for the new Kenwood TS-990 On Sun, Apr 7, 2013 at 10:31 PM, ON4AOI on4...@skynet.be wrote: There can´t be any support for the FT3000 rig file Not from me or Paul or anyone else. YAESU left OUT the cat commands for VFO-B and related Mode So as long there are no commands in the ft3000 firmware It is impossible So why can't there be a driver that treats the radio like it only has one VFO? The ability to read the current VFO and assume simplex operation is better than nothing, right? -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] support for the new Kenwood TS-990
For the FT3K, this would probably work Or one could use the same procedure as has been used for years with the FT-990 and similar rigs by other software: RC; - Clear Clarifier MD#; - Set Mode FA#; - Set Frequency (use split frequency) AB; - move frequency/mode to VFO B FA#; - Set VFO A frequency FT1; - enable Split On the other hand, I do not see any significant differences between the documented FT-950 and FT-3000 command sets. Has anyone tried used using the FT-950 driver/setting or is the FT-950 driver making use of some undocumented capability and thus likely to fail without notice after a firmware update? 73, ... Joe, W4TV On 4/8/2013 10:05 AM, Lou Dietrich wrote: Guy and Jimand Paul (if you are listening) For the FT3K, this would probably workI've been trying to get Paul's attention since before he moved to incorporate that in the DX4WIN code... RC; -Clear Clarifier MD00; -Set Mode VFO A AB; - Let A =B FT1; FR0; -Set Split Set FA;- Set A frequency Set FB;- Set B frequency So even if you can't set VFO B's mode, set A mode firstthen let A=B...what ever was in the A mode goes into the B mode...then set up your split... This 'should' work(famous last words!)... 73/ Regards Lou N2TU On 4/8/2013 9:54 AM, Jim Reisert AD1C wrote: On Sun, Apr 7, 2013 at 10:31 PM, ON4AOI on4...@skynet.be wrote: There can´t be any support for the FT3000 rig file Not from me or Paul or anyone else. YAESU left OUT the cat commands for VFO-B and related Mode So as long there are no commands in the ft3000 firmware It is impossible So why can't there be a driver that treats the radio like it only has one VFO? The ability to read the current VFO and assume simplex operation is better than nothing, right? -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] support for the new Kenwood TS-990
Paul, As I mentioned in my emails, A B is available for the FT3K I will have a FT3000 borrowed from the Yaesu hamfest show stock and it will be in my shack today/ tomorrow and I will beta any new rig file or code change you come up with Additionally, this 'problem' of VFO B not being set properly may also be in the FT950/ 450 rig file as well...as the FT950/ 450 CAT MD command has the first digit fixed at(0) ...zeroso a MD10 isn't valid for the FT950or the FT450... From the DX4WIN FT950 and FT450 rig file: [RC-Set Mode B] CSTR=MD10; Unless you have incorporated something into your code which is a work around for the FT950/ 450, setting the VFO B mode may not work there. I do not have a FT950/ 450 to test this... Yaesu's commands have been mostly standardized since the FT9000 PEP, except for such nuances radios with either one or two receivers. As I mentioned in my previous emails, you write and I'll test it! 73/ Regards... Lou N2TU On 4/8/2013 10:45 AM, Paul van der Eijk wrote: This radio 'stuff' is easy to try; especially when you have the radio connected to your computer. The .rig file is a fairly simple text file that is interpreted by the DX4WIN program. Look at the rig file for the Yaesu ft-1000D; there we set the A VFO (mode, frequency split etc) Copy from A to B, and repeat for the A VFO again. The program 'likes' this sequence when the A-B command is available because it is so simple! --Paul, KK4HD On Mon, Apr 8, 2013 at 10:05 AM, Lou Dietrich n...@roadrunner.com mailto:n...@roadrunner.com wrote: Guy and Jimand Paul (if you are listening) For the FT3K, this would probably workI've been trying to get Paul's attention since before he moved to incorporate that in the DX4WIN code... RC; -Clear Clarifier MD00; -Set Mode VFO A AB; - Let A =B FT1; FR0; -Set Split Set FA;- Set A frequency Set FB;- Set B frequency So even if you can't set VFO B's mode, set A mode firstthen let A=B...what ever was in the A mode goes into the B mode...then set up your split... This 'should' work(famous last words!)... 73/ Regards Lou N2TU On 4/8/2013 9:54 AM, Jim Reisert AD1C wrote: On Sun, Apr 7, 2013 at 10:31 PM, ON4AOI on4...@skynet.be mailto:on4...@skynet.be wrote: There can´t be any support for the FT3000 rig file Not from me or Paul or anyone else. YAESU left OUT the cat commands for VFO-B and related Mode So as long there are no commands in the ft3000 firmware It is impossible So why can't there be a driver that treats the radio like it only has one VFO? The ability to read the current VFO and assume simplex operation is better than nothing, right? -- Jim Reisert AD1C, jjreis...@alum.mit.edu mailto:jjreis...@alum.mit.edu, http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- ~ DX4WIN logging software Paul van der Eijk, KK4HD BrookHill Data Systems LLC http://www.dx4win.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] DX4WIN not keying CW - Same Here
__ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX4WIN not keying CW - Same Here
give us more details. Do you try cw via LPT., COM or winkey? Interface? 73 Kostas SV1DPI Στις 8/4/2013 10:21 μμ, ο/η rati...@verizon.net έγραψε: __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Join my network on LinkedIn
LinkedIn Jose Camacho requested to add you as a connection on LinkedIn: -- I'd like to add you to my professional network on LinkedIn. Accept invitation from Jose Camacho http://www.linkedin.com/e/cgic2t-hfa6fd8e-25/d7wXxZLXXNFmoIIdI3oXvNGkoe7HgmKuM3V/blk/I174772190_210/e39SrCAJoS5vrCAJoyRJtCVFnSRJrScJr6RBfnhv9ClRsDgZp6lQs6lzoQ5AomZIpn8_c34OnP0Vcj8TdPgTckALs4sRcSxldkoLdj0NdzwRdzAOcz4LrCBxbOYWrSlI/eml-comm_invm-b-in_ac-inv28/?hs=falsetok=23bCAntQk1glI1 View profile of Jose Camacho http://www.linkedin.com/e/cgic2t-hfa6fd8e-25/rso/168900457/7YP_/name/212315156_I174772190_210/?hs=falsetok=3lsBzFWng1glI1 -- You are receiving Invitation emails. This email was intended for Dx4Win List. Learn why this is included: http://www.linkedin.com/e/cgic2t-hfa6fd8e-25/plh/http%3A%2F%2Fhelp%2Elinkedin%2Ecom%2Fapp%2Fanswers%2Fdetail%2Fa_id%2F4788/-GXI/?hs=falsetok=3-xDUzQzs1glI1 (c) 2012, LinkedIn Corporation. 2029 Stierlin Ct, Mountain View, CA 94043, USA. __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] ARRL LoTW: tQSL Software 1.14 Ready for Beta Testing
The new version is slick, please try it out. From: Dave AA6YQ Sent: Tuesday, April 02, 2013 8:18 PM To: arrl-l...@yahoogroups.com Subject: [ARRL-LOTW] Trusted QSL version 1.14 is available for beta testing Over the past 4 months, Rick K1MU, Robert KC2YWE, and I have rebooted the Trusted QSL project from which the TQSL and TQSLCert applications and the TrustedQSL library are built. After considering input from ARRL Management, from the ARRL?s LotW Support Group, and from this ARRL-LotW Yahoo Group, we established a set of priorities that would be addressed by a sequence of incremental releases. The first release in this sequence is version 1.14, in which 1. Log files can be signed and uploaded over the internet to LotW in one operation. 2. Errors in Station Locations are reported (e.g. incorrect CQ and ITU zones). 3. QSOs that need not be re-submitted ('duplicates') are brought to the user's attention. 4. Error reporting has been improved. 5. Installation on Windows has been improved. 6. Users are notified when a new version becomes available. 7. Documentation has been improved. A small group of testers began exercising version 1.14 on March 10th; this testing exposed several defects, all of which have been corrected. We are now ready to begin the next stage of testing: every member of this Yahoo Group is invited to download version 1.14, install it, and give it a try. Questions, defect reports, and suggestions should be posted here. The current release candidate v1.14-rc5 is available via http://www.arrl.org/trustedqsl-beta-release You can review the documentation for v1.14-rc5 before you download and install it: http://www.arrl.org/TrustedQSL/tQSL-help/ 73, Dave, AA6YQ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html