@mailman.qth.net
Subject: Re: [Dx4win] error messages upon Saving Data
You don't say which version of DX4WIN.If it's 9.0x, it should prompt
you to mail a bug report. Do that.
On Fri, Feb 8, 2019 at 10:16 AM steve sala wrote:
I have a problem saving data. When I go to Alt S or File-S
, including this one for
reflectors, but I do not know how to “tie” one to DX4WIN to send the report.
73s
Stephen sala
K7AWB
From: Jim Reisert AD1C
Sent: Friday, February 8, 2019 9:20 AM
To: steve sala
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] error messages upon Saving Data
You don'
You don't say which version of DX4WIN.If it's 9.0x, it should prompt
you to mail a bug report. Do that.
On Fri, Feb 8, 2019 at 10:16 AM steve sala wrote:
>
> I have a problem saving data. When I go to Alt S or File-Save, I get this
> window that gives me three choices. “An error occurred in
I have a problem saving data. When I go to Alt S or File-Save, I get this
window that gives me three choices. “An error occurred in the application.”
Either:
Continue application
Restart application
Close application
I thought it was my thumb drive at I: but I changed it to another one cal
Steve, I got the exact same popup when my internet was down upon startup.
After activating
the internet and restarting the progam all was fine.
Mike, N4EPD
On Thursday, April 26, 2018, 5:56:29 PM EDT, Steven Armstrong
wrote:
I recently updated DX4WIN to the latest and greatest. I
Those error messages would indicate the comm port you have chosen in
Preferences>Radio is not correct or available. Do you have the program
linked to your radio? Do you have it configured correctly for the comm port
for your radio?
Tim Moore
On Thu, Apr 26, 2018, 4:55 PM Steven Armstrong wrote:
I recently updated DX4WIN to the latest and greatest. It worked well for a
week or so and then everytime I try to start the application I get Error
Messages. The first message reads, "An error occurred in the application."
and I am given three menu options. They are Continue application, restart
: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On
Behalf Of Jo, YC0LOW
Sent: 15 September 2010 16:13
To: REFLECTOR dx4win
Subject: Re: [Dx4win] Error messages
Hi Kostas and Dave,
Many thanks for your responses.
Dave, it happened only in the middle of the usage i.e: when the
later today.
>
> (BTW - I am using MicroHam USBII as my rig interface)
>
> 73
>
> Dave
> G3NKC
>
>
> --- On Wed, 15/9/10, Kostas Stamatis wrote:
>
>
> From: Kostas Stamatis
> Subject: Re: [Dx4win] Error messages
> To: "REFLECTOR dx4win"
>
10, Kostas Stamatis wrote:
From: Kostas Stamatis
Subject: Re: [Dx4win] Error messages
To: "REFLECTOR dx4win"
Date: Wednesday, 15 September, 2010, 15:40
I also have noticed this but occasionally. I believe that usb to serial
driver is not loaded so quickly because our computer are not so fa
"
To:
Sent: Wednesday, September 15, 2010 2:19 PM
Subject: [Dx4win] Error messages
> When keying CW, I sometimes had consecutive two error mesages as follows:
>
> a. Could not open COM8 for keying:ie_Open - device already open.
> and then:
> b. Radio time out. Radio interface
When keying CW, I sometimes had consecutive two error mesages as follows:
a. Could not open COM8 for keying:ie_Open - device already open.
and then:
b. Radio time out. Radio interface has been disabled
To restore it, I must re-open the software in my notebook. I am using
ver 8.04 with Windows 7 a
12 matches
Mail list logo
