Re: [Dx4win] Windows Off Screen

[Jim Reisert AD1C]

You can search the archives.  Here is one possible solution:

https://www.mail-archive.com/dx4win@mailman.qth.net/msg24040.html


On Sun, Jul 7, 2024 at 5:12 PM Bud Governale  wrote:
>
> I'm moving DX4WIN from a windows ten computer to a windows eleven computer.
> The DX4WIN program in the new Win 11 computer is running using a copied
> config file from the Win 10 computer.
> The world map window, the dx4win title window and the entry window are open.
>
> I wrote the ini file to  thumb drive from the old win 10 computer. In the
> win 11 computer the ini file was written. That accomplished nothing.
>
> The issue is I cannot open on screen any other dx4win windows.
> Nothing happens when I click on Country, Sun rise, Logbook etc window
> selections.
> All the other window selections in the entry window such as QSO, Sort,
> Filter, QSL's, LOTW etc all open on screen.
>
> I suspect the missing windows are opening off screen for Country, Sun rise,
> Logbook etc window selections.
>
> How do I get these to open on my smaller monitor?
>
> I'm on digest.
> Please also send your replies directly to me.
>
> w3ll...@gmail.com
>
> 73,
>
> Bud W3LL
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html



-- 
Jim Reisert AD1C, , https://ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 11 Issue

[PY2YP]

Is the DX4WIN installed into Program Files folder?

73 DX de PY2YP - Cesar

On 5/30/2023 7:40 AM, Rick Murphy wrote:

Same for me.
Start with the basics. What is the file that's being double-clicked upon?
Is it the actual dx4win.exe, or is it a shortcut that might be pointing to
the wrong file?
Right click the file and choose "Open". Does that work?
Obviously dx4win is installed and can be executed (as double-click on a log
file opens it), so something is not working properly for whatever they're
clicking.
(I've seen cases where people saved the TQSL installer on their desktop and
double click that to open TQSL, then complain that it runs the installer
rather than opening TQSL.)
73,
 -Rick

On Tue, May 30, 2023 at 5:25 AM David Gould  wrote:


Hi Paul,

Not sure if any help,  but having just checked on my (up-to-date) W11
machine,  DX4Win starts perfectly OK with me if I double-click the
executable in File manager.

(I normally start with a desktop Icon.)

73,

Dave   G3UEG



On 29/05/2023 21:48, Paul van der Eijk wrote:

Hi, I'm wondering if someone can provide some insight!

I have a customer who cannot run dx4win by double-clicking on the
executable. There is no error message etc. dx4win does not produce a bug
report. However, when double clicking a log file in the Save

sub-directory

the program starts and loads the log!

He experiences the same problem on a second computer alos running Windows
11.

His virus checker has been disabled.

Any ideas, suggestions?

--Paul, KK4HD


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html





__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 11 Issue

[Rick Murphy]

Same for me.
Start with the basics. What is the file that's being double-clicked upon?
Is it the actual dx4win.exe, or is it a shortcut that might be pointing to
the wrong file?
Right click the file and choose "Open". Does that work?
Obviously dx4win is installed and can be executed (as double-click on a log
file opens it), so something is not working properly for whatever they're
clicking.
(I've seen cases where people saved the TQSL installer on their desktop and
double click that to open TQSL, then complain that it runs the installer
rather than opening TQSL.)
73,
-Rick

On Tue, May 30, 2023 at 5:25 AM David Gould  wrote:

> Hi Paul,
>
> Not sure if any help,  but having just checked on my (up-to-date) W11
> machine,  DX4Win starts perfectly OK with me if I double-click the
> executable in File manager.
>
> (I normally start with a desktop Icon.)
>
> 73,
>
> Dave   G3UEG
>
>
>
> On 29/05/2023 21:48, Paul van der Eijk wrote:
> > Hi, I'm wondering if someone can provide some insight!
> >
> > I have a customer who cannot run dx4win by double-clicking on the
> > executable. There is no error message etc. dx4win does not produce a bug
> > report. However, when double clicking a log file in the Save
> sub-directory
> > the program starts and loads the log!
> >
> > He experiences the same problem on a second computer alos running Windows
> > 11.
> >
> > His virus checker has been disabled.
> >
> > Any ideas, suggestions?
> >
> > --Paul, KK4HD
> >
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html



-- 
Rick Murphy, D. Sc., CISSP-ISSAP, K1MU/4, Annandale VA USA
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 11 Issue

[David Gould]

Hi Paul,

Not sure if any help,  but having just checked on my (up-to-date) W11 
machine,  DX4Win starts perfectly OK with me if I double-click the 
executable in File manager.


(I normally start with a desktop Icon.)

73,

Dave   G3UEG



On 29/05/2023 21:48, Paul van der Eijk wrote:

Hi, I'm wondering if someone can provide some insight!

I have a customer who cannot run dx4win by double-clicking on the
executable. There is no error message etc. dx4win does not produce a bug
report. However, when double clicking a log file in the Save sub-directory
the program starts and loads the log!

He experiences the same problem on a second computer alos running Windows
11.

His virus checker has been disabled.

Any ideas, suggestions?

--Paul, KK4HD


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 11

[Tom Doligalski via DX4WIN]

Works fine here w Windows 11. 

Tom W4KX

Sent from my iPad 

> On Feb 26, 2023, at 11:04 PM, John Pritt  wrote:
> 
> Will DX4Win work ok on the Windows 11 OS. 
> 
> John Pritt
> (N1JP)
> 
> 
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Re :Re: DX4WIN Windows Invisible Off Screen

[Radivoj Kar, F6GNZ via DX4WIN]

Hi Bud,Mybe th simplest solutin is to reinstall dx4win to a new PC and copy the 
license and your log files etc..

73, Radi f6gnz


Envoyé depuis Yahoo Mail pour Android 
 
  Le mar., juil. 27, 2021 à 16:12, ON4AOI a écrit:   Bud
Try to unselect them in Windows (next eQSL) 
Or at your own risk edit config.txt at the end all windows have their
position 
Resize the missing inside your screen setting.  
Import these new changes and your done

Guy ON4AOI - OT7K

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Bud Governale
Sent: Tuesday, July 27, 2021 4:00 PM
To: DX4WIN Reflector 
Cc: Bud Governale 
Subject: [Dx4win] DX4WIN Windows Invisible Off Screen

I copied DX4WIN to a computer having a smaller monitor.
Some DX4WIN windows are not there. I suspect they are off the screen
monitor.
The copied DX4WIN file likely had DX4WIN windows locked in position.
How do I unlock the DX4WIN window positions so that I can see them on the
smaller monitor?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
  
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows

[Mike Cizek W0VTT]

Hello John,

Put all the windows where you want them, then write a new config file:

File > Preferences > File > Write configuration file.
Save changes and exit.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of W9RPM
Sent: Tuesday, November 28, 2017 15:23
To: DX4WIN
Subject: [Dx4win] Windows

Had a meltdown. How is it I set DX4WIN to leave the windows in the same 
position?


Thanks, John

-- 
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
DX CLUB: http://www.tcdxa.org/

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows XP ?

[ROBERT GARCEAU]

Yes, I'm using XP and just upgraded from 8.05 to 9 with no problems.
Bob, W1EQ 

On Saturday, October 21, 2017 2:12 PM, Luis Teixeira  
wrote:
 

 One friend of mine , CU3BL. would like to know if version 9.01 will work
with Windows XP?
He has Version 8.05.

Information will be appreciated.

Thanks de Luis, CT4NH
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


   
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows not opening in DX4WIN

[N4QS, Dave Perry]

Found the answer to my own question.  I just had to go into the Awards
database and reset all awards to default.

Dave, N4QS


-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of N4QS, Dave
Perry
Sent: Tuesday, July 12, 2016 5:58 PM
To: DX4WIN Reflector
Subject: [Dx4win] Windows not opening in DX4WIN

I just noticed that I can no longer generate the windows for State, Grid,
IOTA, Zone, etc.  When I try to open one of them, I get the following error
message:

 

"An exception occurred!

Fixed column count must be less than column count"

 

My country window is still open and working fine, but I am afraid to close
it.  I always keep it open to track band slots.  But I only open the other
windows when I need them.  I must have corrupted a file of some kind.

 

Any help would be appreciated.  Thank you.

 

73,

 

Dave, N4QS

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 10 Windows Sizes

[Dave Perry]

Byron,

The only way I found to fix that is to select No Skins under the
Preferences/Screen tab.  Then check Leave all windows in original position.

Dave, N4QS



-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Byron
Peebles
Sent: Wednesday, August 19, 2015 8:10 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Windows 10 Windows Sizes

Does anyone notice that several windows in the DX4WIN interface get smaller
when you restart DX4WIN?
Most notable the Master calls window and the CW Keyboard window require
resizing every time.
There are other windows, too, but these are the real nuisance windows for
me.

Any tricks to fix?  72, Byron

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 10 and DX4WIN

[Jim Reisert AD1C]

On Wed, Aug 19, 2015 at 1:41 PM, Vanderydt Theo  wrote:

> Be aware that there are issues when upgrading to Windows10. Your privacy is
> affected with the upgrade, something they don't tell you of course. Not
> being able to connect to your own node might be one of the issues because
> Windows10 does not permit this, unless you comply with an endless list of
> privacy rules.

That was not my experience.  I had no problems connecting to a local
node on my LAN with DX4WIN and Windows 10, and I am not aware of
changing any privacy settings.  Maybe you mean connecting TO a
computer running Windows 10?

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 10 and DX4WIN

[Vanderydt Theo]

Be aware that there are issues when upgrading to Windows10. Your privacy is 
affected with the upgrade, something they don't tell you of course. Not 
being able to connect to your own node might be one of the issues because 
Windows10 does not permit this, unless you comply with an endless list of 
privacy rules.
Next step is they need to know how many cups of coffee one needs in the 
morning..


My two cents,
Theo.

-Oorspronkelijk bericht- 
From: Don Prater

Sent: Wednesday, August 19, 2015 7:30 PM
To: Dx4win@mailman.qth.net
Subject: [Dx4win] Windows 10 and DX4WIN

Upgraded to IE10 and now I cannot connect to my own node via my local area
network.
I was able to connect to the node computer via its local
address(192.160.0.6). That no
longer works. Has anyone had the same problem and might have an answer?

Don   W4TO

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html 


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 10 and DX4WIN

[Kenneth Leon]

I upgraded my shack computer to Windows 10 recently without any issues. You 
said you are using IE10, but that may be a typo. I opted to use the new Windows 
10 browser, Microsoft Edge as my default browser. It's working fine. All 
amateur radio software with CAT following is operating as before.
Open Control Panel and navigate to Network and Sharing Center.  Confirm that 
you are connected to your ISP provider via your home network ID and Wifi 
security key. Then confirm that it is listed as a Private Network. Windows 10 
asked me to set up a "Homegroup ". Search for that menu, set it up, and write 
it down for future reference. Then confirm that you are or can connect to your 
original home network.
Hope this begins to cure your issue.
73,
Ken, NE6AA




 Original message 
From: Don Prater 
Date: 08/19/2015  10:31  (GMT-08:00)
To: Dx4win@mailman.qth.net
Subject: [Dx4win] Windows 10 and DX4WIN

Upgraded to IE10 and now I cannot connect to my own node via my local area
network.
I was able to connect to the node computer via its local
address(192.160.0.6). That no
longer works. Has anyone had the same problem and might have an answer?

Don   W4TO

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows position and W7

[n4qs]

I have the same problem when I use an external monitor and then switch back to 
the built in screen on the laptop.  The two have different aspect ratios which 
causes the windows to resize.

Dave, N4QS

Sent via BlackBerry by AT&T

-Original Message-
From: Ricardo Navarrete 
Sender: dx4win-boun...@mailman.qth.net
Date: Thu, 14 Mar 2013 00:11:03 
To: DX4WIN Reflector
Subject: [Dx4win] Windows position and W7

Hello all,

I noticed a problem with my W7 and DX4WIN.

I put the desired windows in the position and size wanted, but after
several runnings of the program, two o 3 days later , the windows chaged
their size..

Do you know the problem? It is only mine ?

What can I do??

Thanks

-- 
EA4ZK Ricardo Navarrete
ricardoea...@gmail.com
*
*
*CWops : 1070*
*POR FAVOR, SI VAS A REENVIAR ESTE CORREO, TEN EN CUENTA LOS SIGUIENTES
PUNTOS:
1.- Borra la dirección e-mail del remitente así como cualquier otra
dirección e-mail que aparezca en el cuerpo del mensaje.
2.- Protege frente a terceros a todos los destinatarios de tus mensajes
colocando sus direcciones en la línea de CCO (Con Copia Oculta).
*
*Combatir el spam es tarea de todos.*
*Gracias por tu colaboración.*
7
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] windows 7 issue

[Rick Borken]

Here's a follow-up to my message about having trouble getting the QRZ.com 
lookup to work on Windows 7. I thought I had tried this before I sent the 
message, but I cleared and re-typed the QRZ web address into the window on 
the "Ext Data" setup page. All of a sudden, it worked. I assume there was 
some sort of corrupted data before. Now it works exactly the same as it did 
on my Windows XP computer.

Also, a comment. I have been pleased with how well all my ham radio-related 
programs work on Windows 7. I expected to have at least a few problems, but 
everything seems to work fine.

73, Rick K0XB



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] windows 7 issue

[Jim Reisert AD1C]

On Thu, Oct 25, 2012 at 9:55 AM, Tony McClenny  wrote:

> When I click on a callsign, the attached window opens but qrz.com does
> nothing - there is no data to copy and paste - ideas?

What does "click on an callsign" mean?  In the QSO window, you type F3
to bring up the Callsign/Mgr lookup window.  There is no "clicking".

To do a QRZ lookup, you must have keyboard focus in the Callsign/Mgr
lookup window.  Type ENTER in that window and your browser will start
and look up that callsign on QRZ.COM, and the results will display in
your browser.  There is no link between the browser window and DX4WIN
to capture the data.

There is nothing new here, this is how DX4WIN has always worked.

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] windows 7 issue

[Tony McClenny]

Gentlemen,

When I click on a callsign, the attached window opens but qrz.com does
nothing - there is no data to copy and paste - ideas?


- Tony, N3ME -

118 Ashwood Street
Bethany Beach, DE 19930-9699
(302) 539-5638
Grid:  FM28lm

http://www.n3me.net
Elecraft K3 # 2462
PVRC Member

-Original Message-
From: jjreis...@gmail.com [mailto:jjreis...@gmail.com] On Behalf Of Jim
Reisert AD1C
Sent: Wednesday, October 24, 2012 22:20 PM
To: Tony McClenny
Cc: Kostas SV1DPI; dx4win@mailman.qth.net
Subject: Re: [Dx4win] windows 7 issue

On Wed, Oct 24, 2012 at 5:18 AM, Tony McClenny  wrote:

> Running Windows 7 Home Premium 64-Bit software here and my "Callsign/Mgr
lookup" window appears when I press the F3 Key.  The Callsign is entered in
the window, but not Grid and no qsl is shown AND I am not taken to qrz.com.
So I share Rick's problem.

The grid feature only (I think) works with Radio Amateur Callbook, on
CDROM or installed on your hard drive.  Setting up EXTDATA to point to
QRZ.COM gets you a web lookup of the call, as if you had done it in a
web browser.  No way to get the info into DX4WIN except by copy/paste.

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] windows 7 issue

[Jim Reisert AD1C]

On Wed, Oct 24, 2012 at 5:18 AM, Tony McClenny  wrote:

> Running Windows 7 Home Premium 64-Bit software here and my "Callsign/Mgr 
> lookup" window appears when I press the F3 Key.  The Callsign is entered in 
> the window, but not Grid and no qsl is shown AND I am not taken to qrz.com.  
> So I share Rick's problem.

The grid feature only (I think) works with Radio Amateur Callbook, on
CDROM or installed on your hard drive.  Setting up EXTDATA to point to
QRZ.COM gets you a web lookup of the call, as if you had done it in a
web browser.  No way to get the info into DX4WIN except by copy/paste.

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] windows 7 issue

[Tony McClenny]

Running Windows 7 Home Premium 64-Bit software here and my "Callsign/Mgr 
lookup" window appears when I press the F3 Key.  The Callsign is entered in the 
window, but not Grid and no qsl is shown AND I am not taken to qrz.com.  So I 
share Rick's problem.

- Tony, N3ME -

118 Ashwood Street
Bethany Beach, DE 19930-9699
(302) 539-5638
Grid:  FM28lm

http://www.n3me.net
Elecraft K3 # 2462
PVRC Member


-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On 
Behalf Of Kostas SV1DPI
Sent: Wednesday, October 24, 2012 03:55 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] windows 7 issue

Rick
I 've just tried it and works for me. I have installed my dx4win in 
c:/dx4win as per instructions and i have written under 
file>preferences>ExtData
www.qrz.com/db/
in both callsign and qsl manager's boxes.
Also i have checked the enable box.
73 Kostas sv1dpi

Στις 24/10/2012 03:37, ο/η Rick Borken έγραψε:
> I wonder if anyone out there can help me. I just installed DX4WIN 8.05 on a
> new Windows 7 laptop, and everything works fine, other than the automatic
> QRZ.com web lookup. I believe I have it set up exactly the same as my
> Windows XP desktop, which works. But the Windows 7 laptop does not bring up
> the browser to access QRZ.com . Has anyone else had this problem?
>
> 73, Rick K0XB
>
>
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


-- 
Kostas Stamatis, SV1DPI

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] windows 7 issue

[Kostas SV1DPI]

Rick
I 've just tried it and works for me. I have installed my dx4win in 
c:/dx4win as per instructions and i have written under 
file>preferences>ExtData
www.qrz.com/db/
in both callsign and qsl manager's boxes.
Also i have checked the enable box.
73 Kostas sv1dpi

Στις 24/10/2012 03:37, ο/η Rick Borken έγραψε:
> I wonder if anyone out there can help me. I just installed DX4WIN 8.05 on a
> new Windows 7 laptop, and everything works fine, other than the automatic
> QRZ.com web lookup. I believe I have it set up exactly the same as my
> Windows XP desktop, which works. But the Windows 7 laptop does not bring up
> the browser to access QRZ.com . Has anyone else had this problem?
>
> 73, Rick K0XB
>
>
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


-- 
Kostas Stamatis, SV1DPI

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows Not Visible

[Bud Governale]

Thanks Jim,

That suggestion fixed the missing windows problem.

73,

Bud W3LL


-Original Message- 
From: Jim Reisert AD1C
Sent: Sunday, October 14, 2012 1:40 PM
To: Bud Governale
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Windows Not Visible

On Sun, Oct 14, 2012 at 11:21 AM, Bud Governale  wrote:

> I moved from a two monitor old computer to a single large monitor 
> computer.
>
> Band Map, Calendar and World Map were located in the second window.
>
> They now don’t show up in the single monitor.
>
> How can I restore them to my single monitor.

File | Preferences | Screen

Check the box next to "Leave all windows in original position" and
save preferences.

Restart DX4WIN

-- 
Jim Reisert AD1C, , http://www.ad1c.us 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows Not Visible

[Isidro Acosta Hernández]

Hello Bud and all others:

>I moved from a two monitor old computer to a single large monitor 
>computer.
> Band Map, Calendar and World Map were located in the second window.
> They now don’t show up in the single monitor.
> How can I restore them to my single monitor.

Go to File > Preferences > Screen

and uncheck "Leave all windows in original position".  Next time you run 
DX4WIN, all windows will appear in the main window.

73 de Isidro, EA8NQ
E-mail:  ea...@hotmail.com


Visit the EA8NQ's web page (in Spanish):
http://ea8nq.ure.es/
 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows Not Visible

[Jim Reisert AD1C]

On Sun, Oct 14, 2012 at 11:21 AM, Bud Governale  wrote:

> I moved from a two monitor old computer to a single large monitor computer.
>
> Band Map, Calendar and World Map were located in the second window.
>
> They now don’t show up in the single monitor.
>
> How can I restore them to my single monitor.

File | Preferences | Screen

Check the box next to "Leave all windows in original position" and
save preferences.

Restart DX4WIN

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] windows 7

[Jim Reisert AD1C]

On Fri, Oct 5, 2012 at 7:56 AM, W9RPM  wrote:

> Installing a new PC today. I read somewhere on the driver for the LPT
> port for CW. What needs to be done? Thanks, John

During the install, you'll get a pop-up box telling you what you have to do.

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7

[Jim Reisert AD1C]

>From Joe W4TV:

http://groups.yahoo.com/group/microHAM/message/12395

In case you can't access the URL above, here is the text

The following changes in Windows appear to prevent Windows from
triggering the bugs [that] cause the lockup:

1) Always set the Windows Control Panel "Power Options" to "High
Performance" or "Maximum Performance" depending on version.

2) In the "High Performance" option"

a) click on "Change Plan Settings" and set "Put the computer to
sleep" to NEVER.

b) click on "Change advanced Power Settings", select "USB
Settings," followed by "USB Selective suspend setting" and set
Selective suspend to "disabled"

3) In Windows Device Manager, Universal Serial Bus Controllers double
click on *every* USB Hub (both USB Root Hub and Generic USB Hub),
select the Power Management Tab and clear (uncheck) the box marked
"Allow the computer to turn off this device to save power"

When closing the computer, always do a full (power off) shutdown - do
not select sleep, hibernate, or suspend.

These steps appear to prevent Windows from invoking sleep mode or
performing any hardware power down actions with the USB devices which
are what trigger the crash in d2xx.dll.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7

[Jim Reisert AD1C]

On Fri, Feb 24, 2012 at 11:25 AM, Radivoj Kar, F6GNZ wrote:

> Just found why my DX4WIN  often freezes and/or stops controlling SteppIR and 
> rotor on my new Windows 7 32 bit Home Premium laptop: USB FTDI RS232 devices 
> (MicroHAM Keyer/USB Router, FTDI USB/RS232 converters for SteppIR and rotor 
> control just stop  responding for unknown reason. I have to unplug and 
> plug-in the related USB cable, then it re-starts working, except that in some 
> cases I need to exit DX4WIN and re-start it again !

This sounds like a similar problem seen on the microHAM list.  You
have configure your USB ports NOT to power down.  Joe W4TV (copied)
might be able to give you more details.

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7 64-Bit Pauses and Freezes (UPDATE)

[Byron Peebles]

Unfortunately, my QSO with HP1 tonight was interrupted by numerous 
pauses, making me feel like I was learning morse code again.  Which I 
might actually be doing, to tell the truth.

Another examination of the Task Manager showed the Firefox 4 32-bit 
executable doing battle with the Firefox add-on container executable for 
top spot in the CPU usage list.  This might be because there is an issue 
with Firefox *32 under Windows 7 64-bit that is exaggerated by the use 
of these add-ons on the QRZ.com web pages, which I use as my home page 
in the shack.  I went into the Help menu of Firefox and disabled add-ons 
and the test (under full power) seemed to show the lag/pause was gone.  
Only real operating will prove that.  More later.

I want to say that with each item I have removed, from Aero Themes, to 
MSFT Office doc caches, to Adobe Startup executables, the system has 
become more responsive.  The fact I now have voice announcements in the 
shack (rather than keying the radio) is a major plus.

Now all I have to do is get the pause outa here.

I have asked a friend who is active on the Firefox development forums to 
let me know if they hear something about the add-on container and 
Windows 7 64-bit.

73, Byron

On 06/05/2011 07:45 PM, Byron Peebles wrote:
> Friends:
>
> Using the Task Manager and the Configuration Manager resource 
> mentioned in the previous post, I am feeling better about eliminating 
> the problems I was experiencing with my Windows 7 Ultimate system and 
> DX4WIN.
>
> First, the change from the Display Windows Manager (dwm.exe) from Aero 
> to Classic themes seems to have made the windows faster.  As I 
> continued to look for anything that used more resources than DX4WIN, I 
> also removed a Microsoft Office utility that is for shared document 
> caching.  It seems like the Install script for Office adds that to 
> your Startup programs and I will never share an Office document from 
> this computer.  then, two Adobe Acrobat products installed themselves 
> to make my PDF reading faster in some way and they are now not part of 
> the system startup and background processes.  When these changes are 
> combined, the system behaves better, at least so far.
>
> Second, I found a configuration error in the system that had really 
> bad side effects.  When I was attempting to get the MMTTY RTTY 
> software working, I have set the audio output device to default to my 
> Ten-Tec 712 USB-Sound-Card Interface.  I had also set the Mic input to 
> PTT on the Ten-Tec radio.  The result of this mistake is that my 
> system sounds, startup, spots, etc were being routed to the radio, not 
> the speakers, and were keying the radio.  Not at all a good thing, 
> since I have to assume those sounds could be heard, even though I set 
> the radio to one watt output when I'm not in QSO, just in case.
>
> So, one set of changes to minimize overheads on the combined CPU/GPU 
> of a low-end, low-power motherboard and a secon change to reverse a 
> bonehead configuration mistake that I made in a last-ditch effort to 
> make something unrelated to DX4WIN work.
>
> Again, time is the real measure of resolution, so I'll give it a week 
> or two of active CW work to see if this is truly resolve.
>
> 73, Byron
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7

[Bud Semon N7CW]

I have been using DX4Win with Windows 7 for about 15 months with no
problems.

73, Bud  N7CW

On Mon, Apr 4, 2011 at 1:10 PM, Charles Ristorcelli  wrote:

> I notice the web page does not indicate DX4WIN works with Windows 7.
>
>
>
> Is that because it is an unknown unknown or just haven't had time to update
> the web page?
>
>
>
> I've been having some bizarre software problems with DX4WIN and as well as
> N1MM Logger, HRD + DM780, and Quicken.
>
>
>
> I am starting to wonder if Windows 7 is the problem since I do not have the
> problem on my other computer running XP, and only started to see the issues
> when I started using Windows 7 on this computer.
>
>
>
> 73 de NN3V
>
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7

[Jim Reisert AD1C]

p.s. I have NOT installed the program as Administrator, but my default
login account does have admin privileges.  It's never caused a
problem.  Remember that if you are using an LPT port, there is a
driver that you must manually install, you were told about it when
installing DX4WIN 8.0x.

On Mon, Apr 4, 2011 at 2:25 PM, Jim Reisert AD1C  wrote:

> On Mon, Apr 4, 2011 at 2:10 PM, Charles Ristorcelli NN3V wrote:
>
>> I notice the web page does not indicate DX4WIN works with Windows 7.
>
> There used to be installation instructions for Vista.  I don't see
> them any more. Maybe they were only for Version 7.
>
> DX4WIN 8.0x works just fine with Windows 7.  I am controlling a
> microKEYER and ICOM radio, I can do PSK, FSK, CW, etc. and get DX
> spots from the 'net.  Others have more elaborate hardware setups than
> I do.
>
> Just don't try to install the program in the C:\Program Files area -
> the default is the root of the drive (i.e. C:\).  Mine is installed at
> E:\DX4W805

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7

[Jim Reisert AD1C]

On Mon, Apr 4, 2011 at 2:10 PM, Charles Ristorcelli NN3V wrote:

> I notice the web page does not indicate DX4WIN works with Windows 7.

There used to be installation instructions for Vista.  I don't see
them any more. Maybe they were only for Version 7.

DX4WIN 8.0x works just fine with Windows 7.  I am controlling a
microKEYER and ICOM radio, I can do PSK, FSK, CW, etc. and get DX
spots from the 'net.  Others have more elaborate hardware setups than
I do.

Just don't try to install the program in the C:\Program Files area -
the default is the root of the drive (i.e. C:\).  Mine is installed at
E:\DX4W805

73 - Jim AD1C

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7

[Jim Price - N4ST]

Did you install as administrator (right click)?
Don't know if that helps or not, but it is recommended.
One semi-useless data point is that I am using DX4WIN and HRD/DM780 with
Win7 64-bit without issues.

73 & GL,
Jim - N4ST

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Charles Ristorcelli
Sent: Monday, April 04, 2011 16:11
To: dx4win@mailman.qth.net
Subject: [Dx4win] Windows 7

I notice the web page does not indicate DX4WIN works with Windows 7.

 

Is that because it is an unknown unknown or just haven't had time to update
the web page?

 

I've been having some bizarre software problems with DX4WIN and as well as
N1MM Logger, HRD + DM780, and Quicken.

 

I am starting to wonder if Windows 7 is the problem since I do not have the
problem on my other computer running XP, and only started to see the issues
when I started using Windows 7 on this computer.

 

73 de NN3V

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7

[Doug Hutchison]

If it helps any, 8.04 runs on W7 without any issues.

D - GM7SVK

On 04/04/2011 9:10 PM, Charles Ristorcelli wrote:
> I notice the web page does not indicate DX4WIN works with Windows 7.
>
>
>
> Is that because it is an unknown unknown or just haven't had time to update
> the web page?
>
>
>
> I've been having some bizarre software problems with DX4WIN and as well as
> N1MM Logger, HRD + DM780, and Quicken.
>
>
>
> I am starting to wonder if Windows 7 is the problem since I do not have the
> problem on my other computer running XP, and only started to see the issues
> when I started using Windows 7 on this computer.
>
>
>
> 73 de NN3V
>
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] windows 7

[Dick Flanagan]

There is a bug in the skins software.  Stick with the standard.

Dick

At 02:24 PM 12/21/2010, ALAN ZACK wrote:
 >Works FB with WIN 7 for me also BUT I have had problems when trying
 >different skins configurations so went back to the default. Have you had any
 >luck trying different skins?
 >
 >-Original Message-
 >From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
 >On Behalf Of Dick Flanagan
 >Sent: Monday, December 20, 2010 8:58 PM
 >To: Jim Reisert AD1C
 >Cc: William Osborne; Dx4win@mailman.qth.net
 >Subject: Re: [Dx4win] windows 7
 >
 >What Jim said.  It has been working perfectly here under Windows 7
 >Pro X64 from Day One.
 >
 >Just be sure to install it in your system root directory (e.g., C:/ )
 >and not one of Windows various program directories.
 >
 >Dick
 >
 >At 05:18 PM 12/20/2010, Jim Reisert AD1C wrote:
 > >On Mon, Dec 20, 2010 at 5:46 PM, William Osborne
 > wrote:
 > >
 > >> I have been watching the Win7 comments on this list, but I wonder if
 >anyone
 > >> has Win7 working correctly including holding window sizes/positions
 >between
 > >> sessions?  I am being pushed to Win7 but I am afraid I will not like
 >DX4WIN
 > >> in that environment.
 > >
 > >Works just find here running Win7 Pro 64-bit.  I don't even have the
 > >"Leave all windows in original position" box checked (and never have).
 > >
 > >Just make sure to install as C:\DX4W### and *NOT* in the Program Files
 > >directory structure.
 > >
 > >73 - Jim AD1C
 > >

--
Dick Flanagan K7VC
d...@k7vc.com
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] windows 7

[ALAN ZACK]

Works FB with WIN 7 for me also BUT I have had problems when trying
different skins configurations so went back to the default. Have you had any
luck trying different skins?

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Dick Flanagan
Sent: Monday, December 20, 2010 8:58 PM
To: Jim Reisert AD1C
Cc: William Osborne; Dx4win@mailman.qth.net
Subject: Re: [Dx4win] windows 7

What Jim said.  It has been working perfectly here under Windows 7 
Pro X64 from Day One.

Just be sure to install it in your system root directory (e.g., C:/ ) 
and not one of Windows various program directories.

Dick

At 05:18 PM 12/20/2010, Jim Reisert AD1C wrote:
 >On Mon, Dec 20, 2010 at 5:46 PM, William Osborne 
 wrote:
 >
 >> I have been watching the Win7 comments on this list, but I wonder if
anyone
 >> has Win7 working correctly including holding window sizes/positions
between
 >> sessions?  I am being pushed to Win7 but I am afraid I will not like
DX4WIN
 >> in that environment.
 >
 >Works just find here running Win7 Pro 64-bit.  I don't even have the
 >"Leave all windows in original position" box checked (and never have).
 >
 >Just make sure to install as C:\DX4W### and *NOT* in the Program Files
 >directory structure.
 >
 >73 - Jim AD1C
 >

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] windows 7

[ALAN ZACK]

Using Ver 8.04 that works FB with WIN 7. Only suggestion I have is not to
try to use any skins other than the standard default. When I tried to use
different skins I had problems. I also followed the instruction to install
DX4WIN to my C: dir and not to either of the C:/PROGRAM folders. I believe
if you install DX4WIN in a program folder you may have problems.

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of William Osborne
Sent: Monday, December 20, 2010 4:47 PM
To: Dx4win@mailman.qth.net
Subject: [Dx4win] windows 7

I have been watching the Win7 comments on this list, but I wonder if anyone
has Win7 working correctly including holding window sizes/positions between
sessions?  I am being pushed to Win7 but I am afraid I will not like DX4WIN
in that envoriment.

 

Thanks for the info,

 

William Osborne, K5ZQ

618-967-0252

wosborn...@gmail.com

 


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] windows 7

[Dick Flanagan]

Installation might be easier, but the periodic 
data file updates become a nightmare.  Please 
take our advice and keep the DX4WIN directory out 
of the Win7 Program Files directory.  Where you 
have it on your non-system drive is just fine.

Dick

At 09:30 AM 12/21/2010, Milan Gütter, OK7GU wrote:
 >William,
 >
 >For me DX4WIN works great with my Asus 64bit with Windows 7 Professional.
 >
 >My Asus has two discs.
 >Standard C and solid state D.
 >My DX4WIN is installed on
 >"D:\Program Files\dx4w804"
 >
 >I think it will be better to use the
 >"C:\Program Files (x86)" directory
 >for DX4WIN. The reason - much simple installation.
 >
 >I´am using two radios.
 >First Radio 1 as local, the second Radio 2 remotely controlled.
 >Antenna Rotator, RTTY, PSK31, CW nad RTTY keying works OK.
 >
 >Only one problem I have is that DX4WIN can´t identify the right radio
 >for CW keying.
 >The reason - LPT port is missing on (not only my) notebook.
 >DX4WIN use LPT port for Radio 1 / Radio 2 signal.
 >
 >
 >73,
 >
 >Milan
 >
 >
 >
 >> Date: Mon, 20 Dec 2010 18:46:49 -0600
 >> From: "William Osborne"
 >> Subject: [Dx4win] windows 7
 >> To:
 >> Message-ID:<001501cba0a8$8e239e80$aa6adb...@com>
 >> Content-Type: text/plain;charset="us-ascii"
 >>
 >> I have been watching the Win7 comments on this list, but I wonder if anyone
 >> has Win7 working correctly including holding window sizes/positions between
 >> sessions?  I am being pushed to Win7 but I am afraid I will not like DX4WIN
 >> in that envoriment.
 >>
 >>
 >>
 >> Thanks for the info,
 >>
 >>
 >>
 >> William Osborne, K5ZQ
 >>
 >> 618-967-0252
 >>
 >> wosborn...@gmail.com
 >>
 >>
 >>
 >__
 >Dx4win mailing list
 >Home: http://mailman.qth.net/mailman/listinfo/dx4win
 >Help: http://mailman.qth.net/mmfaq.htm
 >Post: mailto:Dx4win@mailman.qth.net
 >
 >This list hosted by: http://www.qsl.net
 >Please help support this email list: http://www.qsl.net/donate.html

--
Dick Flanagan K7VC
d...@k7vc.com
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] windows 7

[Milan Gütter, OK7GU]

William,

For me DX4WIN works great with my Asus 64bit with Windows 7 Professional.

My Asus has two discs.
Standard C and solid state D.
My DX4WIN is installed on
"D:\Program Files\dx4w804"

I think it will be better to use the
"C:\Program Files (x86)" directory
for DX4WIN. The reason - much simple installation.

I´am using two radios.
First Radio 1 as local, the second Radio 2 remotely controlled.
Antenna Rotator, RTTY, PSK31, CW nad RTTY keying works OK.

Only one problem I have is that DX4WIN can´t identify the right radio 
for CW keying.
The reason - LPT port is missing on (not only my) notebook.
DX4WIN use LPT port for Radio 1 / Radio 2 signal.


73,

Milan



> Date: Mon, 20 Dec 2010 18:46:49 -0600
> From: "William Osborne"
> Subject: [Dx4win] windows 7
> To:
> Message-ID:<001501cba0a8$8e239e80$aa6adb...@com>
> Content-Type: text/plain; charset="us-ascii"
>
> I have been watching the Win7 comments on this list, but I wonder if anyone
> has Win7 working correctly including holding window sizes/positions between
> sessions?  I am being pushed to Win7 but I am afraid I will not like DX4WIN
> in that envoriment.
>
>
>
> Thanks for the info,
>
>
>
> William Osborne, K5ZQ
>
> 618-967-0252
>
> wosborn...@gmail.com
>
>
>
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] windows 7

[Dick Flanagan]

What Jim said.  It has been working perfectly here under Windows 7 
Pro X64 from Day One.

Just be sure to install it in your system root directory (e.g., C:/ ) 
and not one of Windows various program directories.

Dick

At 05:18 PM 12/20/2010, Jim Reisert AD1C wrote:
 >On Mon, Dec 20, 2010 at 5:46 PM, William Osborne 
 wrote:
 >
 >> I have been watching the Win7 comments on this list, but I wonder if anyone
 >> has Win7 working correctly including holding window sizes/positions between
 >> sessions?  I am being pushed to Win7 but I am afraid I will not like DX4WIN
 >> in that environment.
 >
 >Works just find here running Win7 Pro 64-bit.  I don't even have the
 >"Leave all windows in original position" box checked (and never have).
 >
 >Just make sure to install as C:\DX4W### and *NOT* in the Program Files
 >directory structure.
 >
 >73 - Jim AD1C
 >
 >--
 >Jim Reisert AD1C, , http://www.ad1c.us
 >__
 >Dx4win mailing list
 >Home: http://mailman.qth.net/mailman/listinfo/dx4win
 >Help: http://mailman.qth.net/mmfaq.htm
 >Post: mailto:Dx4win@mailman.qth.net
 >
 >This list hosted by: http://www.qsl.net
 >Please help support this email list: http://www.qsl.net/donate.html

--
Dick Flanagan K7VC
d...@k7vc.com
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] windows 7

[Jim Reisert AD1C]

On Mon, Dec 20, 2010 at 5:46 PM, William Osborne  wrote:

> I have been watching the Win7 comments on this list, but I wonder if anyone
> has Win7 working correctly including holding window sizes/positions between
> sessions?  I am being pushed to Win7 but I am afraid I will not like DX4WIN
> in that environment.

Works just find here running Win7 Pro 64-bit.  I don't even have the
"Leave all windows in original position" box checked (and never have).

Just make sure to install as C:\DX4W### and *NOT* in the Program Files
directory structure.

73 - Jim AD1C

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7

[Rick Murphy]

On Sat, Apr 24, 2010 at 10:25 AM, Mel  wrote:
> You need to do the install as administrator. However,  I don't believe
> you have to set it to "Run as Administrator". In any case you may want
> to disable UAC... it's a pain in the neck and not really necessary on a
> home computer.

Under Windows 7, UAC alerts are rather infrequent and usually indicate
that something serious is happening. Please don't disable UAC as it's
is the only thing protecting you from a number of widespread attacks
on the net that will try drive-by installs of botnet control software.
And no, anti-virus won't always protect you. The fact that you
absolutely need this on home computers is clearly demonstrated by the
millions of botnet machines out there. Don't disable UAC, please. Or,
if you must, don't use that machine to surf the web or read e-mail.

Unfortunately, Windows Vista is a different story - UAC is much more
annoying and much more frequently popping up. Still, it's a necessary
line of defense to keep drive-by downloads off your machine.

DX4WIN probably requires administrative permissions to install the
drivers it uses for rig control, etc. Once those are installed, it
should be able to work without UAC getting in the way.

If you're getting too many UAC popups on Windows 7, you're probably
doing something risky. The way DX4WIN works is risky (application data
and program files mixed together), so expect Windows to complain.  :-)
73,
-Rick
-- 
Rick Murphy, CISSP-ISSAP, K1MU/4, Annandale VA USA
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7

[Mel]

You need to do the install as administrator. However,  I don't believe 
you have to set it to "Run as Administrator". In any case you may want 
to disable UAC... it's a pain in the neck and not really necessary on a 
home computer.

Matt Cassarino wrote:
> I've tried to install DX4WIN 8.03 on a fresh upgrade (ie "everything
> XP" was moved to WINDOWS.OLD) of 32 bit Windows 7 Home Premium
> 
> I still get a pop up message every time I start DX4WIN:
> 
> DO YOU WANT TO ALLOW THE FOLLOWING PROGRAM FROM AN UNKNOWN PUBLISHER
> TO MAKE CHANGES TO THIS COMPUTER ?
> 
> I installed it as C:/dx4win803 as it suggests.
> 
> I right clicked before installing and set RUN AS ADMINISTRATOR for the
> LPT driver installer, the MS redistributable installer and DX4WIN.
> 
> I set the application as RUN AS ADMINISTRATOR once installed.
> 
> Is this the way it runs (with an annoying pop up every time you start
> it) or did I miss something ?
> 
> Thanks
> Matt WV1K
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7

[Mel]

Check that the USB virtual COM ports are still assigned to the same 
devices. One other user reported that after the update the COM port 
assignments had changed.

Henrik Klüver Møller wrote:
> Hi
> I have upd from Windows XP to a PC with Windows 7 and have lost CAT 
> connection from FT-2000D.
> Using the same USB to serial converter same settings.
> Can not connect to Logger, DX4WIN or PCC-2000.
> Any idea?
> vy 73 de OZ6TL - Henrik
> 
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7

[Bud Semon N7CW]

Bob,

I am using DX4Win on a Win7 64 bit computer - works fine.  Although I'm sure
there are ways I will be able to screw it up in the future :) 

73, Bud  N7CW

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Bob Rinaldi W1CNY
Sent: Saturday, March 13, 2010 6:57 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Windows 7

Will Dx4win run under Windows 7?

Thanks,
Bob W1CNY


__ Information from ESET NOD32 Antivirus, version of virus signature
database 4940 (20100312) __

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7

[ON4AOI]

Yes it sure does

Guy

> -Oorspronkelijk bericht-
> Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
> boun...@mailman.qth.net] Namens Bob Rinaldi W1CNY
> Verzonden: zaterdag 13 maart 2010 14:57
> Aan: dx4win@mailman.qth.net
> Onderwerp: [Dx4win] Windows 7
> 
> Will Dx4win run under Windows 7?
> 
> Thanks,
> Bob W1CNY
> 
> 
> __ Information from ESET NOD32 Antivirus, version of virus
> signature database 4940 (20100312) __
> 
> The message was checked by ESET NOD32 Antivirus.
> 
> http://www.eset.com
> 
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7 and DX4Win

[Mel]

Since these pre-installed freebies are usually just for a trial period I 
would suggest you remove Norton and install one of the free virus 
checkers... unless you actually plan to purchase it. If you do I would 
recommend doing some research before necessarily choosing Norton. If you 
do decide to use it... a little doc reading is probably in order ;-)

Alan Zack wrote:
> It is working FB for me on a new PC running WIN 7 Home Premium. For now 
> I am only using it as the basic logger and QSL label printer, no radio 
> control, RTTY keying, etc.
> 
> The only thing weird to me is with DX4WIN ver 7 (and earlier) on a PC 
> running WIN XP all I had to do is click on the DX4W icon on the desktop 
> or in the start menu and it would start right up. Under WIN 7 when I 
> click on either shortcut icon I get a Norton pop-up window asking me if 
> I really want to open this program and I must click allow. It is not a 
> DX4W issue because I get the same pop-up window when I try to start 
> other programs. It is a Norton virus program issue (Norton came 
> installed) but I haven't figured out how to tell Norton not to warn me 
> everytime I start it up.
> 
> Anyone else encountered this?
> ___
> Alan Zack
> Amateur Radio Station K7ACZ
> http://www.geocities.com/k7acz
> ---
> 
> - Original Message - 
> From: "Ruddy Dettmaring" 
> To: 
> Sent: Saturday, November 28, 2009 8:07 AM
> Subject: [Dx4win] Windows 7 and DX4Win
> 
> 
>> Hello,
>>
>> Can someone tell me if DX4Win V8.02 is working well under Windows 7 ?
>>
>>
>>
>> Regards,
>>
>>
>>
>> Ruddy
>>
>>
>>
>> ON7DR  -  OT7DR
>>
>> Ruddy Dettmaring
>>
>> Linde 4
>>
>> 9940 Sleidinge
>>
>> Belgium
>>
>>  ruddy.dettmar...@telenet.be
>>
>> Tel:09-324 63 08
>>
>> Fax:   09-329 37 63
>>
>> GSM: 0476-970 382
> 
> 
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7 and DX4Win

[Jim Reisert AD1C]

On 12/4/2009 7:06 PM, Alan Zack wrote:

> The only thing weird to me is with DX4WIN ver 7 (and earlier) on a PC
> running WIN XP all I had to do is click on the DX4W icon on the desktop
> or in the start menu and it would start right up. Under WIN 7 when I
> click on either shortcut icon I get a Norton pop-up window asking me if
> I really want to open this program and I must click allow. It is not a
> DX4W issue because I get the same pop-up window when I try to start
> other programs. It is a Norton virus program issue (Norton came
> installed) but I haven't figured out how to tell Norton not to warn me
> everytime I start it up.

I'm using Microsoft Security Essentials and don't have this problem.

73 - Jim AD1C

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7 and DX4Win

[Alan Zack]

It is working FB for me on a new PC running WIN 7 Home Premium. For now 
I am only using it as the basic logger and QSL label printer, no radio 
control, RTTY keying, etc.

The only thing weird to me is with DX4WIN ver 7 (and earlier) on a PC 
running WIN XP all I had to do is click on the DX4W icon on the desktop 
or in the start menu and it would start right up. Under WIN 7 when I 
click on either shortcut icon I get a Norton pop-up window asking me if 
I really want to open this program and I must click allow. It is not a 
DX4W issue because I get the same pop-up window when I try to start 
other programs. It is a Norton virus program issue (Norton came 
installed) but I haven't figured out how to tell Norton not to warn me 
everytime I start it up.

Anyone else encountered this?
___
Alan Zack
Amateur Radio Station K7ACZ
http://www.geocities.com/k7acz
---

- Original Message - 
From: "Ruddy Dettmaring" 
To: 
Sent: Saturday, November 28, 2009 8:07 AM
Subject: [Dx4win] Windows 7 and DX4Win


> Hello,
>
> Can someone tell me if DX4Win V8.02 is working well under Windows 7 ?
>
>
>
> Regards,
>
>
>
> Ruddy
>
>
>
> ON7DR  -  OT7DR
>
> Ruddy Dettmaring
>
> Linde 4
>
> 9940 Sleidinge
>
> Belgium
>
>  ruddy.dettmar...@telenet.be
>
> Tel:09-324 63 08
>
> Fax:   09-329 37 63
>
> GSM: 0476-970 382


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7 and DX4Win

[Jim Reisert AD1C]

On 11/28/2009 9:07 AM, Ruddy Dettmaring wrote:

> Can someone tell me if DX4Win V8.02 is working well under Windows 7 ?

I use DX4WIN 8.02 on Windows 7 64-bit in the home office.  Works fine 
but don't have a radio connected.  Try the demo, you can get 
installation instructions for Vista/Win7 on the Downloads page.

73 - Jim AD1C
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows 7 and DX4Win

[Mel]

AFAIK it is but I would suggest that you try the demo in case you have 
any driver issues. Being a pioneer incurs some risk ;-)

Ruddy Dettmaring wrote:
> Hello,
> 
> Can someone tell me if DX4Win V8.02 is working well under Windows 7 ?
> 
>  
> 
> Regards,
> 
>  
> 
> Ruddy
> 
>  
> 
> ON7DR  -  OT7DR
> 
> Ruddy Dettmaring
> 
> Linde 4
> 
> 9940 Sleidinge
> 
> Belgium
> 
>   ruddy.dettmar...@telenet.be
> 
> Tel:09-324 63 08
> 
> Fax:   09-329 37 63
> 
> GSM: 0476-970 382
> 
>  
> 
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows Defender warning

[Mike]

That seems to have done it.

Mike

Mel wrote:
> The fact you restored from a complete image should not cause a 
> problem... in fact this machine is also a restore due to a HD failure.
>
> I would be inclined to re-install DX4Win and see if that clears it up 
> since it doesn't take very long.
>
> Mike wrote:
>> Mel -
>> Here's a history listing from Defender. Doesn't tell me much.
>>
>> This program has potentially unwanted behavior.
>> Advice:
>> Permit this detected item only if you trust the program or the 
>> software publisher.
>> Resources:
>> driver: VICHW11
>> file:
>> C:\WINDOWS\SYSTEM32\DRIVERS\VICHW11.SYS
>> Category:
>> Not Yet Classified
>>
>> I'm an admin  on this box, and Dx4Win was installed from a download, 
>> initially. The drive actually is a backup from Acronis True Image, 
>> because I suffered a lightning strike on the old machine. I don't 
>> remember if Dx4Win was installed before or after the zootttz.
>>
>>
>> Mel wrote:
>>> Odd. I wasn't running Defender on my XP machine in the shack, so I 
>>> installed it. No issues when I start DX4Win. It almost sounds like 
>>> DX4Win is trying to reinstall the driver every time it starts.
>>>
>>> I wonder if there isn't a registry entry that tells DX4Win that it 
>>> is already installed. When you installed DX4Win, were you 
>>> administrator?
>>>
>>> Also, if you copied your installation from another computer that 
>>> might create an issue.
>>>
>>> You can check the Defender log. type Security Center from the 
>>> command line and click on Defender then History. There might be a 
>>> hint there.
>>>
>>> Mike wrote:
 It's in windows/system32/drivers directory .


 Mel wrote:
> Make sure it is in windows/system32/drivers directory
>
> Copy it there manually if you have to. The original copy is in you 
> dx4win folder in the drivers directory.
>
>
>
> Mike wrote:
>> I did, actually, but it was a couple of posts later. :-)
>>
>> Yes, the issue is that Windows Defender gigs me every time I 
>> start DX4Win.
>>
>> The question is, how to stop that?
>>
>> 73, Mike NF4L
>>
>> Mel wrote:
>>> I saw that posting. You didn't ask a question... I wasn't sure 
>>> what the issue was.
>>>
>>> Is the message from Windows Defender every time you start the 
>>> DX4Win?
>>>
>>> Mike wrote:
 Mel wrote:
> Might be an opportune moment to remind everyone to mention the 
> version you having an issue with. It can result in faster 
> resolution...
 I put a version number in my question 8 DAYS ago, and got no 
 response.. :-P

 Mike NF4L


>>>
>>
>>
>>
>



>>>
>>
>>
>>
>


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows Defender warning

[Mel]

Odd. I wasn't running Defender on my XP machine in the shack, so I 
installed it. No issues when I start DX4Win. It almost sounds like 
DX4Win is trying to reinstall the driver every time it starts.

I wonder if there isn't a registry entry that tells DX4Win that it is 
already installed. When you installed DX4Win, were you administrator?

Also, if you copied your installation from another computer that might 
create an issue.

You can check the Defender log. type Security Center from the command 
line and click on Defender then History. There might be a hint there.

Mike wrote:
> It's in windows/system32/drivers directory .
> 
> 
> Mel wrote:
>> Make sure it is in windows/system32/drivers directory
>>
>> Copy it there manually if you have to. The original copy is in you 
>> dx4win folder in the drivers directory.
>>
>>
>>
>> Mike wrote:
>>> I did, actually, but it was a couple of posts later. :-)
>>>
>>> Yes, the issue is that Windows Defender gigs me every time I start 
>>> DX4Win.
>>>
>>> The question is, how to stop that?
>>>
>>> 73, Mike NF4L
>>>
>>> Mel wrote:
 I saw that posting. You didn't ask a question... I wasn't sure what 
 the issue was.

 Is the message from Windows Defender every time you start the DX4Win?

 Mike wrote:
> Mel wrote:
>> Might be an opportune moment to remind everyone to mention the 
>> version you having an issue with. It can result in faster 
>> resolution...
> I put a version number in my question 8 DAYS ago, and got no 
> response.. :-P
>
> Mike NF4L
>
>

>>>
>>>
>>>
>>
> 
> 
> 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html