Hi,
Is there a reliable (always available) way to get a timer tick in an
application similar to the old 18.2 per second timer tick from BIOS.
That one was always there, high speed access (no slow access to a RTC)
and the tick count is known (to approx calculate intervals for
polling and other
Hi David,
I think EVT_TIMER is required functionality. Many drivers depend on it.
I know it goes away at runtime, but so do the rest of boot services. There's
nothing that can be done about that; even the BIOS timer tick was taken over by
all modern operating systems, so it wasn't reliably
I prefer to set the attributes to 0 for the MorLock deletion in the same patch.
It is fine to have empty MorLockInitAtEndOfDxe() in TcgMorLockDxe.c with your
explanation.
Thanks,
Star
-Original Message-
From: Laszlo Ersek [mailto:ler...@redhat.com]
Sent: Wednesday, October 11, 2017
Reviewed-by: Star Zeng
-Original Message-
From: Yao, Jiewen
Sent: Friday, October 20, 2017 5:07 PM
To: edk2-devel@lists.01.org; Zeng, Star
Subject: Re: [edk2] [PATCH] IntelSiliconPkg/VtdInfoSample: Fix IGD RMRR memory.
Correct email address
Hi Karunakar,
For #3, it's the non-regression issue that will cause the target IP is invalid
if it's the same with previous one. And I'd like to fix it by another patch
since it's not related to the InitiatorInfo display.
Can you please report another Bugzilla for the ISCSI target address
Hi Meenakshi/Liming,
My 2 cents, around this.
1)
Having a new lib for BE read might not be helpful for us,
e.g. a IP which is in BE mode access the UART for print or system registers
which are in LE,
then with new Lib, we will get all read/write in BE mode
2)
Especially for our IPs, which
Reviewed-by: Eric Dong
> -Original Message-
> From: Ni, Ruiyu
> Sent: Friday, October 20, 2017 5:56 PM
> To: edk2-devel@lists.01.org
> Cc: Dong, Eric
> Subject: [PATCH] MdeModulePkg/PciBus: Fix bug that PCI BUS claims too
> much resource
>
>
On Fri, Oct 20, 2017 at 10:24:04PM +0100, Ard Biesheuvel wrote:
> Linux on ARM/arm64 will infer from the presence of a /chosen/stdout-path
> DT property or of a SPCR ACPI table that the primary console is the serial
> port, even if a graphical console is available as well.
>
> So let's introduce
On 23 October 2017 at 11:26, Leif Lindholm wrote:
> On Fri, Oct 20, 2017 at 10:24:04PM +0100, Ard Biesheuvel wrote:
>> Linux on ARM/arm64 will infer from the presence of a /chosen/stdout-path
>> DT property or of a SPCR ACPI table that the primary console is the serial
Update the UfsBlockIoPei driver to consume IOMMU_PPI to allocate DMA
buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Star Zeng
Cc: Jiewen Yao
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni
Cc: Jaben Carsey
---
ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git
I also agree the mapping.
Julien,
There is a typo in commit log " instropecting " should be " introspecting ".
Anyway, you may need the commit log according to the mapping, you can take care
of the typo in the updated commit log.
Thanks,
Star
-Original Message-
From: Ni, Ruiyu
Sent:
This is for debug purpose. I think UINT32 is OK if AARCH64 can operate 32bit
value.
Thanks
Liming
> -Original Message-
> From: Laszlo Ersek [mailto:ler...@redhat.com]
> Sent: Saturday, October 21, 2017 1:19 AM
> To: Ard Biesheuvel
> Cc: Gao, Liming
Hello All,
Boot order is changing to default if we add VLAN, below are the steps followed.
[Steps]
1. Change default boot order to some other, Then Commit changes and Exit.
(In my case first boot option Is UEFI Internal Shell, then I changed PXEv4 as
first boot option)
2. Add a
Hi Jiaxin,
1. I've verified, IPv6 support condition check for HTTP/ISCSI, It works fine
and the ASSERT issue also resolved.
2. Regards Display Initiator IP, It resolves the issues the issues which I've
mentioned previously.
3. I found some other issue in ISCSI, Below are the details
A. Add
Reviewed-by: Eric Dong
> -Original Message-
> From: Ni, Ruiyu
> Sent: Monday, October 23, 2017 1:12 PM
> To: edk2-devel@lists.01.org
> Cc: Dong, Eric
> Subject: [PATCH] UefiCpuPkg/MtrrLib: Use SetMem instead of SetMem64 to
> fix hang
>
>
Changed tool path.
1. Add FCE for GCC build
2. Change build script to make sure that system can still boot after Setup
variable deletion
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Guo Mang
---
Platform/BroxtonPlatformPkg/BuildBios.sh | 14
More than one entry of RT_CODE memory might cause boot problem for some
old OSs. This patch will fix this issue to keep OS compatibility as much
as possible.
Cc: Eric Dong
Cc: Jiewen Yao
Contributed-under: TianoCore Contribution Agreement 1.1
Original AP index variable name not well express the meaning
of the variable. Also this name is better used in later patch.
So change the variable name for better understanding.
Cc: Ruiyu Ni
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong
Current logic always waiting for a specific value to collect all APs
count. This logic may caused some platforms cost too much time to
wait for time out.
This patch series add new logic to collect APs count. It adds new variable
NumApsExecuting to detect whether all APs have finished
Current logic always waiting for a specific value to collect all APs
count. This logic may caused some platforms cost too much time to
wait for time out.
This patch add new logic to collect APs count. It adds new variable
NumApsExecuting to detect whether all APs have finished initialization.
Each
On 23 October 2017 at 15:18, Gao, Liming wrote:
> This is for debug purpose. I think UINT32 is OK if AARCH64 can operate 32bit
> value.
>
Both my ARM and AARCH64 implementations write 16 bytes at a time, and
so whether the source value is UINT32 or UINT64 or UINT16 does
Hi Laszlo,
On 18/10/17 13:11, Laszlo Ersek wrote:
On 10/18/17 12:19, Julien Grall wrote:
After commit 91cc526b15 "MdeModulePkg/SerialDxe: Fix not able to change
serial attributes", serial is initialized using the reset method that
will call SetAttributes.
However, SetAttributes may not be
23 matches
Mail list logo