On 12 Feb 2007 at 4:05, [EMAIL PROTECTED] wrote:
It could be an American frequency designation, just as 7040 kHz was
the American QRP frequency as well while the rest of the world was
7030 kHz (although according to QRP ARCI the transition has begun to
7030, but I still find plenty of
Hi Tom:
In the process of installing the back light for my K1 # 1848, The
instructions stated to remove the clear plastic that covers the
front of the back light. I don't see this clear plastic sheet?
I just happen to have fifty (50) of the future K1 backlights on my
desk right now, to be
Kevin KD5ONS wrote:
We may even get a check in from Rupert once Geoff teaches his favorite
pheasant how to peck out his callsign ;)
-
At 02:00Z this morning no signals were heard from the 40m ECN (tried 7043
ish up).
Dennis,
First of all, you voltage is dropping a full volt (unless that was a typo),
and strange readings like that are usually the result of poor solder
connections. Reflow all your solder connections, adding a bit of flux from
new solder to wet the joint. You should be doing the reflow with an
with apologies to Young Frankenstein, How I Did It!
FWIW, I was one of the first to experiment with this. I developed an approach
that worked well for me, and here it is.
Understand, the mission is to minimize the inductance of the connection. The
shorter the connection to ground, the less
Hi Kevin
The N7WG Bill? you show is actually me.
N0SS miscopied my call when I checked in.
I was working on my antennas and tuning
across the band when I heard the net, so
decided to check in, just for the heck of it :-)
Was QRU, so just went on with my antenna work.
73, Bob N6WG
The Little
Hello,
Is any chance to connect (interface) ts-850s with transverter for 2m (Elecraft
XV144) without special mods?
Can someone write some easy how to.
Thank You
Best Regards
Samir
Samir Popaja, 7S7V /SMVZX
http://ww.qsl.net/7s7v
Duhöksgatan 4B
SE-21558 Malmö
Sweden
On Mon, 12 Feb 2007 16:50:59 +0100, Samir Popaja wrote:
Is any chance to connect (interface) ts-850s with transverter for
2m (Elecraft XV144) without special mods?
Can someone write some easy how to.
I did it with my XV220 several years ago, with no complications and
it worked fine. I don't
Bob,
Unless the polarizing strip is flexible as well as the protective strip,
I'd have to say no. Any other ideas in regards to my viewing problem? I
could try cutting away at the IC socket and resoldering the pins from
the back to see if that helps any.
Bob Nielsen wrote:
By any chance did
Have a look to the owner manual (download). I believe, you will find
everthing you want. They describe how to use the transverter with
no-K2-Transceiver.
For my part, I use the XV144 with a K2.
73
Luc/F6HJO/HB9ABB
Is any chance to connect (interface) ts-850s with transverter for 2m
(Elecraft
I need some advice from a K2'er who has used the K2 and a PK-232 for Pactor
I.
1) The PK-232 has not yet been set up for HF and the 232 instructions
mention using a monitor, which I don't have, when checking the level of the
AFSK pot on the 232 and the AF gain on the K2.
2) Also, how does one
WB6TMY:
The only way the rest of us are going to ever get any use out of
the band is to use it and generate some CQ's. Otherwise the DX'ers
will continue having their way.
Isn't this true on every band? That's why we
have QRP calling frequencies away from the mainstream
DX areas.
Dave,
My K2 also produces clicks on 40m which disappear if the antenna is
disconnected or turned away from strong BC stations above 7100 kHz. Running
CAL PLL has not cured the problem, and I have since found the same problem
on 15m. It might exist on other bands but I have not had the time to
(Resending with corrected URL)
WB6TMY:
The only way the rest of us are going to ever get any use out of
the band is to use it and generate some CQ's. Otherwise the DX'ers
will continue having their way.
Isn't this true on every band? That's why we
have QRP calling frequencies away
I have for sale a 120W version of the LP-200 Dummy Load/Digital Wattmeter by
Larry Phipps - N8LP. The meter is assembled and works great. Check out his
web site for all the info and pictures you could want on the LP-200. Larry
makes great products. I think they are as good as Elecraft's and
Thanks for the advise Tom, and Don. I resoldered around the current sense area
of cntl bd, and checked for
bad soldering. Also verified that shorting jumper is shorting pins 23 of P7. I
tried another power supply,
and in step 4 of the test on page 47 I have reading of E13.6, 0.06.and in
I think this is the known feature described by Wayne in:
http://www.ac6rm.net/mailarchive/html/elecraft-list/2000-03/msg01007.html
73 Kevin w9cf
My K2 also produces clicks on 40m which disappear if the antenna
is disconnected or turned away from strong BC stations above 7100
kHz. Running CAL
Dennis,
That should be OK - 0.06 amps plus a 0.16 amp increase is 0.22 Amps, just
like the manual indicates.
OTOH, I am concerned about the fact that the displayed voltage drops so
much. If you have a 'wimpy' power supply connected that might be expected,
but if your power supply is
while QSK is a barely adequate 22 wpm or so in normal mode, it sure seems a lot
slower in split mode. At a common place 28 wpm, there is no hearing between
letters, only between words, meaning it is hard to quickly pick up that a DX
station is sending, and listen in time to hear who he is
Many thanks for the lead. Strangely the frequency separation between
adjacent clicks seems to be related to the number, separation and strengths
of strong received signals. Also on occasion when tuning through a 40m BC
station whose received carrier level is in the region of -10dbm, the
The meter has been sold.
Roger, W1EM
-
-I have for sale a 120W version of the LP-200 Dummy Load/Digital Wattmeter
by
-Larry Phipps - N8LP. The meter is assembled and works great. Check out
his
-web site for all the
We have a new Builder Alert, covering the wiring of the new type (RoHS
compliant) of K2 speaker jack.
Read about it on our website at:
http://www.elecraft.com/Apps/Builder's%20Alert%20New%20K2%20Speaker%20Jack%20Rev%20A.pdf
This Alert applies to K2 kits purchased since August, 2006.
Just got my K2 , SSB, battery, DSP .. wow wow WOW
counting parts now..
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
23 matches
Mail list logo
