Steve Ellington wrote:
While on 160m a few nights ago I heard loud key clicks and tracked it down
to a ham just 1 mile away who was chasing a DX station. When he
transmitted,
my K3 was rendered totally deft from any signal within 10 Khz of him! My
200hz roofing filter, ATTN, preamp
Because of illness, I've been unable to complete my 160 transmit antenna in
time for the contest so I decided to experiment with the k3 receive on 160.
A well known local contester who shall be nameless parked himself on one
frequency for the entire first seven hours of the contest and supplied
Don Rasmussen wrote:
This code is fresh off the java mill, enhanced K3 operation at your
fingertips.
... but it requires the outdated VBRUN300.DLL in order to run SETUP.EXE.
If the app is programmed in Java, why not distribute it as Java archive?
73, Markus
--
View this message in
AJSOENKE wrote:
After 2+ years of operation K-3 SN31 has just succumbed to a compound
failure of the smaller Main control AF and RF knobs.
So it's not just those who had knobs from a bad batch earlier in the year.
When I wrote earlier that I didn't have confidence that I wouldn't
Steven.Zabarnick wrote:
I was not able to perform the K3 AF Output Mod (two 470 ohm
resistors on the KIO3 board).
I thought they were two 51 ohm resistors (according to the instruction sheet
I have here.) Has there been a mod to the mod?
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's
I'd really dig seeing an Android K3 client however in order to work
right it will probably require a PC side client. I can only hope that
we get to maintain cross platform compatibility so that Linux and Mac
users can use the Android client... I've been quite happy with the
Linux K3 utility and
I had the same thought.
I just kept adding stuff to my K2/100.
Fixed Audio output mod/board
Clifton Labs Z1 IF Buffer Amp board.
Telepost LP-PAN and EMU-0202 sound card for Pan adapter display on my
computer.
Last kid, last year in college (the good lord willing and the creek
don't rise), I
It is like thiswhat are you going to do for an encore when the K2 and
the K3 have set a standard?
I don't know about you, but I would like to build an Elecraft color TV or
Elecraft electronic organ. I know the feeling..kit withdrawal is
serious!!
Dave K1WHS
(former Heathkit builder)
looks nice - found 'setupkit.dll' with google, vbrun300 was on my system
with another obsolete program, and got it running - only to find you have
limited it to Com 8...
My K3 is on COM 13
good luck 73 John VE3NFK
chen dave wrote:
hi Don,
After D/L, it say need VBRUN300.DLL,
Hi Guys,
PLEASE send all positive comments (or dirty laundry) to wb8yqj at Yahoo dot
com, the rest of the list does not want to endure my beta communications.
Everything you need to run the program will be loaded by the setup, but some OS
configs have security that don't want VBS or DLL
Dave,
Looks like you have pointed me in the right direction. I had not done the
wattmeter calibration as the manual implies that it is optional. That plus
the usual inaccuracies in the average wattmeter I decided to accept the
factory settings. This morning I did the procedure and thus far
Looks cool but won't run due to missing files.
Steve
N4LQ
n...@carolina.rr.com
- Original Message -
From: Don Rasmussen wb8...@yahoo.com
To: elecraft@mailman.qth.net
Sent: Saturday, December 05, 2009 11:53 AM
Subject: [Elecraft] The few, the proud,the Beta testers! Free new K3
software.
Looks like Elecraft has solved the problem of audio artifacts. I have not had
any audio burst in any NR/NB or other combination since FW 3.58 or so.
Anyone else?
-
Richard - HB9ANM
--
View this message in context:
http://n2.nabble.com/Any-audio-bursts-recently-tp4118699p4118699.html
Sent
I wish everyone with broken/cracked knobs would just ask Elecraft to send
them a set of new knobs. They are much better than the old ones. Maybe the
endless traffic about this already beat to death subject would cease!
W8GX
- Original Message -
From: Dave G4AON elecr...@astromag.co.uk
NAQCC Sprint Tuesday night!
This coming Tuesday evening will be the monthly NAQCC Sprint for December, 2009.
I will refer you to the proper URL:
http://home.windstream.net/yoel/sprint200912.html
There you will find all the details as to time, frequencies and also a special
prize.
This
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 12/6/09 at 1800Z on 14.314
MHz. Hopefully, propagation will be good. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home:
Hi Ted
Thanks for the comment _ I am ok with com ports (got 14 ! ) but my
1-8 are configured for those items that 'must' be below 9 - not the
case with the K3 and the utilities I use with it (TRX-Manager,
PowerSDR, Skimmer, K3 Util; and occasional HRD)
73
John VE3NFK
2009/12/5 wp4cw [via
Anyone within CONUS interested in swaping your 1.8Khz roofer for my 2.1Khz
roofer?
IF interested please contact me directly to the address I have at qrz.com,
Thanks
AD4C
For a refined ham it is compulsory to own a k3
__
Dave,
Thank you for taking he time to take the measurements nd pass them along. I
said in my previous post that I had calibrated the wattmeter and it seemed
to help. Well, it did help some but not enough to completely eliminate high
current warnings and subsequent power reductions.
In trouble
Have I tapped the wrong button somewhere? Suddenly I have to set the MON
level around 40 to get a decent sidetone on CW. I don't think it was
that high before.
73, Mike NF4L
__
Elecraft mailing list
Home:
I've looked through the archives, and have not found a similar situation
to mine, so here goes:
1) I can re-download v1.5 firmware to the KRC2 without a hitch.
2) Every time I try to use the config utility, it first tells me 'v1.5'
firmware is loaded, then it tells me that 'No KRC2 found', with
Julian,
Not all older K3s are experiencing the knob problems. I have one of
the early K3s along with the others in the K3 Firmware Field Test group,
and there have been no identified problems with the knobs used at that
time in my recollection.
This is the result of a batch of faulty knobs,
Just thinking out loud into the future
Firewire can do a lot of things that USB and serial communications never will.
It's faster with video and disk I/O because the protocol is leaner,
and you can create networks with it.
I think that a FireWire network between a rig like the K3 and a
I had the same problem using a Dell XP Pro desktop computer and a Belkin
USB/Serial
adapter which worked fine with everything else, including the K3. I then tried
a Win2K
laptop with a real serial port and it worked. Finally, I hooked the Belkin
adapter to the
laptop and it worked there
Sorry you're having trouble, but I'm glad to know that it wasn't just me. At
least you only spent several hours on it, I just finished days of messing with
this and about a half-dozen back and forth emails with Gary at Elecraft.
There is a v1.6 firmware that I finally got to install, even
Greetings reflector fans,
I noticed something odd tonight with my K3; something I've never noticed
before. I decided to do some SWL'ing around 40m and test out the relatively
new Sync-AM feature. All works well but whenever I turn the filter shift or
width knobs now, I get a fairly loud encoder
Hello,
I am having a problem when I go into AM, or AM sync. Example: I go to an
AM Shortwave station. If I turn the AF gain past approximately 3/4 or
farther the radio starts to Stutter, Distort, and finally the audio
disappears. I cannot make out what is coming out from my speaker. The
Hi Rick,
Do you perhaps have AGC turned off and the AF LIM set to a value of
less than 30? The distortion and eventual cutting out of audio at
high levels you are describing sounds a lot like the intended AF
limiter action. If so, the solution is to either turn on AGC, or
increase the
I have been reading all of this traffic knowing that I have never had the
problem. Finally, just for the heck of it, I pointed my desk lamp at my K3
and can see clearly the cracks radiating from the hole in the plastic of the
audio gain knob. It has not felt loose (yet) and had assumed that
Hey Joe,
Thanks for the fast reply!
No, I do not have the AGC Off, nor have I changed any of the settings
within the AGC (Menus). I should have stated that in my original post.
Anyway, I am really stumped as what the problem is.
If you happen to have a K3 equipped as mine, could try to
Hey Paul,
This is a great topic. Sony, Apple, and a few other companies have been
using the Standard IEEE 1394 Interface, commonly known as FireWire for
a number of years. It does have many benefits. From my limited knowledge
as I am not an EE, the protocol seems to be an extremely
31 matches
Mail list logo