Has anyone heard if linking of VFO A/B (as the K3 does) is on a "to do
list":...?
I have not seen anything on this from memory but that has been known to
have let me down once or twice.
73
Gary
--
*Gary - VK1ZZ
Skype: Gary.VK1ZZ
Motorhome Portable
The Shack*
*Elecraft K3
P3 Panadapter
KPA500FT
Elecraft sells kits. Troubleshooting is part of kit building, always
has been. Heath did some really great things with kits, but didn't
provide the support Elecraft builders get, both from the company and
this list ... but of course, the Internet hadn't been invented then
either. :-)
On 5/8
Hi Gang:
Just a note: Wayne asked you to email him direct... if you want a
copy of beta software to test. He does read the list, but if you want
to try the new release, contact him directly.
73 de Ray
K2ULR
KX3 #211
(who is not a tester)
I would also like to see a 10 MHz if option for my VLF transverter.
John Hendricks K7JLT
On May 8, 2013, at 15:04, Ken Roberson wrote:
> Hello Elecraft,
>
> I would like to request a change in the firmware that would allow me
> to Run Homebrew transverter on the new 630M band ( 472 - 479 KHZ
I have not previously posted on this thread, but there has been a lot of
good information posted by others.
Let me re-enforce what others have said on this subject. Some excerpts
follow:
- Look for the 'simple' things first.
- Break things down into basics - work into a good dummy load, work w
Excellent! I'll take a copy!
Mike AC6JA
In a message dated 5/8/2013 3:31:13 P.M. Pacific Daylight Time,
kk7p4...@gmail.com writes:
This pre-beta test release remembers NB per band.
73,
Lyle KK7P
Any idea when the NB will be made "sticky" as I pretty much need it on all
band
Well let us hope I learned from the experience!
I just ordered a K2 to build. I'm so grateful for
the patience and help from the group.
73
Stan AE7UT
--
View this message in context:
http://elecraft.365791.n2.nabble.com/OT-troubleshooting-gotcha-s-tp7573470p7573505.html
Sent from the Elecraf
This pre-beta test release remembers NB per band.
73,
Lyle KK7P
Any idea when the NB will be made "sticky" as I pretty much need it on
all bands but have to turn it back on each time I switch bands.
We've enhanced the KX3 noise blanker, with 15 level settings and
improved strong-sig
Hello Elecraft,
I would like to request a change in the firmware that would allow me
to Run Homebrew transverter on the new 630M band ( 472 - 479 KHZ )
I would like to use the K3 as an IF on 80 meters.
My LO is running at 3.5 mhz
Its easier to build a stable oscillator on 3.5 MHZ than the higher b
Any idea when the NB will be made "sticky" as I pretty much need it on all
bands but have to turn it back on each time I switch bands.
Mike AC6JA
KX3 #3237
In a message dated 5/8/2013 1:17:32 P.M. Pacific Daylight Time,
n...@elecraft.com writes:
We've enhanced the KX3 noise blanke
We've enhanced the KX3 noise blanker, with 15 level settings and improved
strong-signal performance. If you experience a lot of QRN at your location and
would like to try the field-test firmware release, please email me directly.
73,
Wayne
N6KR
_
Good evening to all,
yes it is that it is written in pencil "3.6" on the back of the envelope
thank you again for your help
73 , Christophe F8ACF-56
De : Don Wilhelm
À : Christophe F8ACF-56
Cc : "elecraft@mailman.qth.net"
Envoyé le : Mardi 7 mai 2013 22
Wayne, did you mean to say NR or is NB now also ajustable? I wish NB is as
adaptable as it is in K3. I always have to fight ignition noise when
operating from a field. That is where NB similar to K3 would be useful.
73, Igor UA9CDC
- Original Message -
From: "Wayne Burdick"
To: "bru
Fred,
Been there - done that!
When beginning my career in 2-way repair, an old experienced tech
told me some good advice on troubleshooting: "its usually something
simple", in other words don't be looking at major things to
fail. This is why the first step is to check all the inputs and
ou
Your are pretty much stuck with the factory display. Take a look at what
they do in the r75 group. It is a really neat look. Probably as close to a
led display as you can get. It involves taking a piece of polarizing film
and positioning it over the display until the numbers become clearly in
focus
Hi, Tom!
We tried to make this as smooth as possible, but had one problem with an
older Linux version of the K3 Utility.
We are starting to build K3s with a different LCD driver integrated circuit
(no better function, just a different supplier). The two LCD drivers
require different MCU firmware
Jean,
The LCD on the K2 is a custom design, and could only be changed by
special order, which may cost more than the K2 itself. It is not a
pixel type display.
The LCD backlight might be found in a different color (not available
from Elecraft). The LCD itself is translucent and does not have
For a similar effect you may like the looks of using polarizing film. It
reverses the display colors. Instead of black numbers on a orange
background, it will give you orange numbers on a black background. The
color will depend on the color of your display. Many fine examples and
information on thi
Hello Jean -
The problem with an LED display is that it takes much more current than
an LCD. When operating portable from batteries the total current is an
important factor. With the LCD display in the K2 there is an option to
turn off the backlight to reduce the current even more.
The early calc
Hi K2 members..
Due the years of production of the K2 rig and witch I folow a lot of time
Is there is nobody who had made the attention to change the LCD display readout
into a LED display reading ??
Personally I think the readebillity of a LED display (by eaxmple for the K2 in
geen ) looks even
20 matches
Mail list logo
