On 2013-07-05 22:22, Brian Alsop wrote:
SWR is a pretty coarse indication of interaction. Interactions can
change directional antenna F/B and F/S ratio by 6-10 db easily (assuming
you have it in the first place) and hardly affect SWR.
At least, this is my experience from antenna modeling.
And Phil, they did not teach me the most important thing...how to solder a
PL 259
George, W6GF
- Original Message -
From: Paul Chebi paul.ch...@att.net
To: Phil Shepard ph...@riousa.com
Cc: elecraft@mailman.qth.net elecraft@mailman.qth.net
Sent: Friday, July 5, 2013 9:13 PM
Hello FM,
I had to reprogram my K3 after power failure when I was updating firmware.
I managed to reprogram all except the power of my XV-144 transverter.
The transverter output power is +- 10 watt but I cannot turn it down to
example 1 watt, in fact I cannot change the power setting.
Anyone
In a recent message, Rudi cl.r...@gmail.com writes
The transverter output power is +- 10 watt but I cannot turn it down to
example 1 watt, in fact I cannot change the power setting.
MENU CONFIG: XV1 PWR (or whatever XV number you have assigned)
- Change the XV number with a keypad key.
Set
I am interested, I have sent a reply via direct email Johnny, please keep an
eye open for it.
Jeff Cochrane - VK4XA
Innisfail,
QLD, Australia
-
Jeff Cochrane - VK4XA
East Innisfail
Queensland
Australia
K3 #4767
--
View this message in context:
Paul,
That option is totally up to you. Go to the home page whose link is shown on
the bottom of the post and set up the way you want.
73, Mike NF4L
On Jul 6, 2013, at 12:13 AM, Paul Chebi paul.ch...@att.net wrote:
This note is for the log/web manager.
I note that each time somebody
Thanks for interest , the filter was sold.
Sent from my iPhone 4
Jeff Cochrane vk...@arrl.net 於 2013年7月6日 下午6:52 寫道:
I am interested, I have sent a reply via direct email Johnny, please keep an
eye open for it.
Jeff Cochrane - VK4XA
Innisfail,
QLD, Australia
-
Jeff
Hi,
Just seen on Ebay UK - item 281131839716
Nothing at all to do with seller. Just posted for anyone who is interested in
UK.
Peter G4URT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Howdy K3' people:
I've searched the manual and pushed/held/tapped a lot of K3 buttons.
Somewhere in the recent past, I have lost ability to TAP Shift or
Width to get to be able to contorl Filter's Hi-Cut/ Low-Cut .
The green LED always remain on Shift and the other one on Width.
Holding
What mode are you in? Go to SSB and try it again.
Grant NQ5T
Somewhere in the recent past, I have lost ability to TAP Shift or
Width to get to be able to contorl Filter's Hi-Cut/ Low-Cut .
__
Elecraft mailing list
Home:
Hi all:
My K3 has been working flawlessly. It is part of a K3/KPA500/KAT500
lineup. I was monitoring FSK441 on 6M for several hours, no problems.
I turned it off for breakfast, came back and turned it on. The front panel
LCD fully lit, but with no characters on it, just blank. All front panel
Thank you! I now remember reading that, but nowhere do they say, in big
bold red print DON'T FREAK OUT!!!
73 de Brian W3BW
*Brian F. Wruble, C.F.A.
*70 is the new 40.*
*
Mail: 1107 Key Plaza, PMB 447 Key West, FL 33040-4077
Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD
No longer there!!
'73. 2E0BWQ.
Sent from my iPad
On 6 Jul 2013, at 13:21, PETER HUTCHISON peter.hutchi...@btinternet.com wrote:
Hi,
Just seen on Ebay UK - item 281131839716
Nothing at all to do with seller. Just posted for anyone who is interested in
UK.
Peter G4URT
Paul, this is not a blog, it is a email list. That's what they dosend
emails and responses.
Art
KC7GF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
This is a mailing list. The whole point of a mailing list is to forward
email responses to previous posts. So, in a way, it is designed to
clutter your inbox. You have options in the way the list sends
messages to you here:
http://mailman.qth.net/mailman/listinfo/elecraft
But understand,
Bill
It took me a year to locate the noise source similar to yours. It is
worse on 80m and the frequency shifts as picture content changes. It
turned out to be next door. They had bought a 60 Samsung plasma. I took
a portable AM receiver over there, turned on their tv and it totally
blanked
And that's why they invented the delete key.
Have a great day,
Dale - WC7S
-Original Message-
From: Scott Manthe scott.man...@gmail.com
Date: Sat, 6 Jul 2013 16:43:54
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] OT - anyone have experience with effects of
metalroofs on antenna
Hi, andy body selling a basic elecraft k3 or the elecraft kx3?
Or would deal other radio's.
73 mike
M0fcg m1key
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
It sounds like you may have the situation described below, from K3
Owner's Manual D10 Page 58.
SIG RMV [T] NOR (Advanced) OPTIONAL SPURIOUS SIGNAL REMOVAL: Can be
used to remove fast-tuning receiver birdies that are audible even
with an antenna connected. (An alternative in SSB mode is
Maybe I'm missing the really obvious, but how do I insert a carriage return
when creating or editing a text message for the SVGA option? I can't find
references to it anywhere.
Thanks
Tim
NZ8J
__
Elecraft mailing list
Home:
That is a plasma TV near your home.
How do I know? My next door neighbor has one. He just moved in last
month and this week the noise started.
What can you do about it?
I went next door and asked him if he had a plasma TV and he answered
Yes, but I don't watch it except on Saturdays when
Hit the ENTER key. I don't know why any one would refer to it as a
carriage return unless they were a computer programmer ;o)
73,
Tom
Amateur Radio Operator N5GE
Licensed since 1976
ARRL Lifetime Member
QCWA Lifetime Member
On Sat, 6 Jul 2013 13:48:47 -0400, Tim cook n...@woh.rr.com wrote:
See elecraft.com/elist.html for alternative list viewing pages. (Both nabble
and mail-archive can view our posts sorted by subject etc.)
In the interest of keeping list volume and SNR under control, let's end this
thread at this time.
73,
Eric
List Manager
elecraft.com
_..._
On Jul 6,
Well my still operational Model 15 needs it as it does not have the Carriage
Return (CR) option installed. Just for fun and demonstrations I fire it up.
Driven from a Timewave 59Y. No way to get Baudot out from the K3 P3.
Many do not send it any more and it the Model 15 just sits there
Actually I'm creating and editing RTTY memories and a carriage return (cr) or
new line. (nl) was the first thing that came to mind at the time. I want to TX
my call and insert a CR/NL before the memory stops TX'ing. In any case hitting
ENTER completes the editing process entirely and doesn't
Or people old enough to have been doing RTTY using mechanical teletype units.
Besides Carriage Return (CR) we had Line Feed (LF). Of course on a typewriter
carriage return gave you a line feed for free.
All these computer people seem to call it new line.
Some people miss AM. I miss the
Hi Bob,
This feature is disabled in CW with either one or both of the following
settings.
if CONFIG:CW QRQ is turned to ON
or if CONFIG:PB CTRL is set to SHIFT-.01
73,
Mike K2MK
KD7YZ Bob wrote
Howdy K3' people:
I've searched the manual and pushed/held/tapped a lot of K3 buttons.
When I purchased my first K2 in 2001, I ordered a FT-100 main tuning knob
from Yaesu to replace the original one from Elecraft. That rig is long
gone and I recently purchased a K2/100 that has the Elecraft knob with a
finger dimple. It's not bad, but I am wondering if anyone has one of those
Tim,
I don't have an SVGA, so I don't know how it wants control characters. CR is
ASCII 13, hex 0D. Maybe a \r.
73, Mike NF4L
On Jul 6, 2013, at 2:25 PM, Tim cook n...@woh.rr.com wrote:
Actually I'm creating and editing RTTY memories and a carriage return (cr) or
new line. (nl) was the
Or a Teletype hobbyist.
Dick, n0ce
- Original Message -
From: Tom H Childers
To: Tim cook
Cc: 'Elecraft Mailing List'
Sent: Saturday, July 06, 2013 1:01 PM
Subject: Re: [Elecraft] Carriage Return in SVGA text messages?
Hit the ENTER key. I don't know why any one
Bob,
Have you found a comma on the model 15 yet?
Dick, n0ce
- Original Message -
From: Bob
To: n...@n5ge.com ; Elecraft Reflector
Sent: Saturday, July 06, 2013 1:22 PM
Subject: Re: [Elecraft] Carriage Return in SVGA text messages?
Well my still operational Model 15 needs
...or an old guy. The Model 19 TTY had a CR key, and a separate LF key, if my
memory is correct. That is what most of us used for RTTY before computers.
Smelly, noisy, but they worked.
The key was a CR key well before it was an ENTER key.
Mark
KE6BB
(An old guy)
Sent from my iThingie.
I remember 30 years ago when word processing programs were becoming available
with word wrap many experienced typists had trouble getting their minds around
that you didn't have to hit Enter (the equivalent of running the carriage back)
at the end of each line. That formatting could be done
Yes, the early programs were exciting. I bought Lotus Suite and hated to see
it go by the wayside.
BTW,
Has anyone on the list ever used a model 40 teletype with magnetic tape storage?
Dick, n0ce
- Original Message -
From: David Christ
To: Elecraft Reflector
Sent: Saturday,
Suppose the manufacturer can't or won't fix it? What happens then? I have a
Pioneer Elite plasma in my house that radiates plenty. Anyone have any
experience with Pioneer?
Chris
Sent from my iPad
On Jul 6, 2013, at 1:57 PM, Tom H Childers n...@n5ge.com wrote:
That is a plasma TV near
My suggestions for handling email from any email reflector or Yahoo group:
Sign up for individual emails - BUT - set a filter in your email client
to move all emails containing [Elecraft] in the subject into a
separate folder in your inbox (I call mine Elecraft).
That effectively creates your
Hi Dick,
Yes, that was a recent discovery. It is hidden under the FIGS and
N keys. But what really baffles me is that I can not get it out of CAPS and
I've been accused or shouting and just being rude.
I guess I don't have enough time on the GREEN KEYS to have
Although this thread is quite mature, I will add my experience with
plasma TVs, one of which is a Pioneer Elite. Both of my next door
neighbors have plasmas - one a Panasonic and the other the Pioneer.
DXing used to be my favorite aspect of ham radio, and 40m my favorite
band, but since the
Ken and I will be accepting formal (paid) orders towards the next
production run of 700 Hz filters through 1600 UTC on Wednesday July 10th.
At that time we will commission production of batch four, and begin a
waiting list towards batch five.
See http://www.unpcbs.com/frontdoor/
Since we have
I recently bought the 73CNC steel knob for the K2. I still can't believe
I spent $90 for a freakin' radio knob! But I love it, and would do it
again. Totally transformed the feel of that little radio.
Just for fun, I tried it on my K1, but it's too heavy for the wobbly
encoder used in that
I have a neighbor who has a plasma. But what is worse I have a neighbor two
doors down whose outside lights cause 30-40 db of noise from 7MHz to 20 MHz! I
offered to change them for him, and asked him to at least just turn them on at
night. He has a timer, but he leaves them on many times all
Re: But what really baffles me is that I can not get it out of CAPS and I've
been accused or shouting and just being rude.
That shows you that the folks who complain the most usually know the least!
Long time ago...going from memory here:
No small letters were available. Up through the
All,
I received a nearly-overwhelming amount of responses to my email and I
wanted to make sure I follow-up with you all to thank you and let you
know the results of operating in my first contest QRP with the KX3.
Although I failed to mention it in my original email, many of you
correctly
Remeber the report in QST about the person who had a well pump
interfering with a ham's operation - After several notices indicating
that he must turn it off or change it, the FCC issued a very heavy
forfeiture.
Perhaps complaints of RFI to the FCC can do some good (but it will take
time).
Hi
I am using a dxengineering active receive antenna with a 102 whip, mounted at
ground level about 30 feet away from my av620 vertical. I'm using is as a noise
antenna while the av620 is my main antenna.
Waiting until the weather cools off to install my first beam. Should be less
noisy than
On Saturday used a Straight-Key to send:
-Original Comment---
* In CW and DATA modes, SIG RMV should not be used in
combination with a CONFIG:PB CTRL setting of Shif t=.01.*
PB CTRL Shift=.05 (Advanced) Specifies the granularity of the
passband SHIFT
I obtained a well built plain K2 that has normal power out and receive on
all bands except 17m.
On 17m power is very low at .1watt and power control has no effect. I hear
a clean signal on my other receiver but faint.
On receive the K2 does receive but signals are 9 to 10 s-units down.
As an
Aaron,
Congratulations on a your first contest and the results. Keep at it and you'll
discover that you can do quite a creditable job QRP as compared to many QRO
operators. It really is just practice and timing.
We did a QRP Field Day last year and took a second place in our category and
our
The weekly SSB net will meet tomorrow (7/7/13) at 1800z on 14.3035 MHz. I will
be net control from western Oregon. See you then.
73,
Phil NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Robin,
I saw your email to me a few days ago, but was not able to respond
because you sent it from Nabble and it did not put your email address in
the TO: field - instead it substituted the nabble address and I am not
subscribed there.
I strongly believe you have a problem in the bandpass
Yep. AFAIK it was Telex (land-line based hard copy texting between terminals
for businesses) that added lower case letters to the keyboard.
73 Ron AC7AC
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mark Petiford
Sent:
Good Evening,
After a long, hot week it is cooling back to normal. Feels good not
baking in the sun. Propagation was better for the times I was on twenty
meters but I have yet to find any activity on six meters. It is always
fun when six is open.
Please join us tomorrow afternoon
We've beaten this to death and beyond ;-). End of thread.
In the future, please resist posting when threads get this long and repetitive.
73,
Eric
List modulator
elecraft.com
_..._
On Jul 6, 2013, at 11:48 PM, Don Wilhelm w3...@embarqmail.com wrote:
Remeber the report in QST about the
End of Thread. Please resist the urge to post on OT areas when the thread gets
this long.
Also, please -always- delete the majority of the copied thread text as I have
done here, and all of the prior list footers to reduce unnecessary email volume
for other readers.
73,
Eric
List moderator,
I just realized that both my K3's running FW 4.67 are no longer locking to
the K3EXREF calibration signal from a Trimble Thunderbolt. Specifically, the
REF CAL config menu item does not show the flashing asterisk and moving
the main tuning knob does not show LOCKED. I have had the K3EXREF
55 matches
Mail list logo