I've not noticed such an issue, Harry. I'll take a
closer look since it's fired up now.
Phil W7OX
On 3/14/15 10:11 AM, Harry Yingst via Elecraft wrote:
My KPA500 has light from the LCD display leaking around the HV and Current
buttons
I'm considering putting a strip of foam weather stripping
Dayton is coming, Dayton is coming!
Mike W0MU
On 3/14/2015 4:51 PM, Gary Gregory wrote:
Harlen
Yep.
However i have just got more info in the last coupla days.
Please ask Wayne or Eric as there is more updated info coming very
soon:-)
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On
My lips are sealed.:-)
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 15/03/2015 9:19 AM, W0MU Mike Fatchett w...@w0mu.com wrote:
and Visalia where Elecraft has been known to release new stuff!
Mike W0MU
On 3/14/2015 4:55 PM, Gary Gregory wrote:
Mike
You might be physic...:-)
Thanks to everyone who responded, both to the group and privately.
Still unresolved is whether it is the K3 or my cabling.
Before tackling the daunting task or checking the cables or tearing into
the K3, I'm going to borrow another transceiver and see if the problem is
still there.
If no, then
I recently added a KAT 500 to my K3 station. I modified the interface cable
to allow for remote power on off of the KPA via a macro key on the K3. Now
with the cable going from the K3 to the KAT and then to the KPA I have lost
the ability to remote the power on off of the KPA.
How have others
A sensor is close to completion for the P3 which will do what you want i
believe.
Perhaps you could ask Wayne for confirmation.
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 15/03/2015 6:51 AM, Vic Rosenthal 4X6GP/K2VCO k2vco@gmail.com
wrote:
I'm sure it would be easy to add a pickup to
Good evening everyone,
I am just getting back into ham radio and I would like to find a well cared for
K3 that needs a new home. The best candidate should be fairly well equipped
with options and have the general coverage receiver module. If you have such
in your shack please send the
Speedy recovery, Phil!
Ian, KM4IK
On Mar 14, 2015 7:37 PM, Phil Shepard ph...@riousa.com wrote:
Your on your on this week for the 1800 z net. Phil, ns7p is in the
hospital. Good luck, hope to see you next week.
__
Elecraft
Thanks, Joe. I'll contact Elecraft sales on Monday to get the price of the
cable.
73 de,
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
Please join me in the Georgia QSO Party April 11-12, 2015. Info at
http://www.georgiaqsoparty.org.
10-10 #74624, North Georgia Chapter #2038
Mike
You might be physic...:-)
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 15/03/2015 8:54 AM, W0MU Mike Fatchett w...@w0mu.com wrote:
Dayton is coming, Dayton is coming!
Mike W0MU
On 3/14/2015 4:51 PM, Gary Gregory wrote:
Harlen
Yep.
However i have just got more info in the last
and Visalia where Elecraft has been known to release new stuff!
Mike W0MU
On 3/14/2015 4:55 PM, Gary Gregory wrote:
Mike
You might be physic...:-)
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 15/03/2015 8:54 AM, W0MU Mike Fatchett w...@w0mu.com
mailto:w...@w0mu.com wrote:
Dayton
All fixed, I put in a couple strips of low density foam weather stripping.
From: Richard S. Leary w7...@comcast.net
To: 'Phil Wheeler' w...@socal.rr.com; elecraft@mailman.qth.net
Sent: Saturday, March 14, 2015 6:45 PM
Subject: Re: [Elecraft] KPA500 - Light leaking around the Buttoms
Great.. I was hoping it would be available before I retire next year..
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: Gary Gregory
vk1zzg...@gmail.com /divdivDate:03/14/2015 6:51 PM (GMT-05:00)
/divdivTo: Harlan hsherr...@reagan.com
Running split on 15 meters signals just disappeared on K3 sub rcvr. Other
bands work normally in split. Audio and rf cranked all the way up can hear
white noise but no signals. P3 shows normal signal spikes. When I hit a/b
I hear all the sigs OK on main rcvr. Shut K3 down and restarted, no joy.
Thanks to all responders. I had wrong antenna selected with the RX-ANT
button. Old people should not mess around with complicated machinery.
73 Joe K2UF
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe
K2UF
Sent: Saturday, March 14, 2015
Never noticed until you mentioned it Harry. I'm left handed. My K3 sits
right in front of me, and the P3, KPA500 are to the left. All just below eye
level. Menu button on KPA500 about 18 to my left. Not a problem here.
Rick, W7LKG
-Original Message-
From: Elecraft
can you tell me when I bought my K3?
S/N 1997
Thank you
KB6G (formerly AE6RH)
Ron Midwin
r...@midwin.com
310-497-7727
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
All,
I decided to take the plunge this spring and see what 6m is all about. To
that end, I purchased a PR6-10 NIB from an estate sale, and am eager to get
it installed with my K-Line. I already have the ACC port on my K3 occupied
by the KPAK3AUX cable for the KPA500/KAT500. I'm looking for
Gary
They have been working on that for how many years now?
Harlan
NC3C
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: Gary Gregory
vk1zzg...@gmail.com /divdivDate:03/14/2015 5:14 PM (GMT-05:00)
/divdivTo: Vic K2VCO k2vco@gmail.com
I'm sure it would be easy to add a pickup to the sensor yourself. It
could be done with a toroid transformer placed on the center pin of one
of the coax connectors.
On 14 Mar 2015 22:13, Jobst Vandrey wrote:
I operate almost exclusively with digital modes so I would REALLY like to
see a new
If no, then it's the K3. If not, then it's cables.
Don't count on it. If no, it could be the cable connected to
the K3.
73,
... Joe, W4TV
On 2015-03-14 10:07 PM, Hank Garretson wrote:
Thanks to everyone who responded, both to the group and privately.
Still unresolved is whether it is
I operate almost exclusively with digital modes so I would REALLY like to
see a new feature on the W2 sensor module to allow a tektronix scope to be
connected for my K3 so I can monitor the transmission envelope. I have the
CP1 directional coupler minimodule but putting that in line makes for a
Some time ago I wrote a little paper about my earlier radio history to show some
friends and family. Although I stated earlier that my first transmitter was a
6L6, that was very brief and I acquired a commercial transmitter that used the
6L6 to drive an 807.
Link to story:
Howard,
you must not loose connection when putting the KAT500 in line! I use the
same setup, i.e. K3 cabled to KAT500 cabled to KPA500 and have the cable
between K3 and KAT500 modified to allow remote switch on of the KPA500.
Just make sure you use a straight cable between the KAT500 and
Your on your on this week for the 1800 z net. Phil, ns7p is in the hospital.
Good luck, hope to see you next week.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Vic try putting the sub rx on the dx and tune with the main vfo. You won't
need split and the dx is probably not going to move.
Ray K8RDJ
On Sat, Mar 14, 2015 at 3:58 PM, Phil Wheeler w...@socal.rr.com wrote:
Hmm, I just assumed it was something not GOOD, Vic :-)
73, Phil W7OX
On 3/14/15
Hmm, I just assumed it was something not GOOD, Vic
:-)
73, Phil W7OX
On 3/14/15 12:22 PM, Vic Rosenthal 4X6GP/K2VCO wrote:
So what does GCBAD mean? It's an abbreviation
used by my once-teenage son and friends for Got
Caught Being A Dork.
And I GCBAD again for failing to activate SPLIT.
I
Harry, if I sit to the left of the KPA500 (I
don't) and my operating room is dark (it isn't, I
have a desk lamp) I would notice what you mention
-- but I doubt it would bother me.
73, Phil W7OX
On 3/14/15 10:11 AM, Harry Yingst via Elecraft wrote:
My KPA500 has light from the LCD display
So what does GCBAD mean? It's an abbreviation used by my once-teenage
son and friends for Got Caught Being A Dork.
And I GCBAD again for failing to activate SPLIT.
I know we talked about this before. I have pretty much kept myself
honest by using a macro to activate split and the subreceiver,
Harlen
Yep.
However i have just got more info in the last coupla days.
Please ask Wayne or Eric as there is more updated info coming very
soon:-)
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 15/03/2015 8:26 AM, hsherriff hsherr...@reagan.com wrote:
Gary
They have been working on that
When I go into my K3’s CONFIG menu to the Dual PB setting, The only value I see
in the screen is two dashes — Turning the knob that normally will change a
menu value has no effect. I’m wondering if my APF is working properly as even
when I tune in a station on CW with the APF, it is very,
A very difficult choice indeed. The P3 display can be studied to
understand how a DX operator is working the pile. You can tell if he is
working up or down the split or where in split in the case of large
splits of late or if he is shotgunning it.
I use both constantly. The 2nd receiver
The APF will take signals in the noise and make them very readable. It
is not something you will need to use all the time.
Mike W0MU
On 3/14/2015 10:47 PM, Fred Jensen wrote:
Sounds like something is wrong Mike. My CONFIG:DUAL PB toggles
between nor and APF.
The APF takes a little
What version of the software are you running?
You also need to peak the filter with the shift knob.
Mike W0MU
On 3/14/2015 10:31 PM, Michael Marx wrote:
When I go into my K3’s CONFIG menu to the Dual PB setting, The only value I see
in the screen is two dashes — Turning the knob that
On 3/14/2015 9:51 PM, W0MU Mike Fatchett wrote:
The APF will take signals in the noise and make them very readable.
Yes, it is very good once you get the hang of it. I move the peak just
a tad off of the center of the passband. It really seems to make a
difference ... might be a result of
Sounds like something is wrong Mike. My CONFIG:DUAL PB toggles between
nor and APF.
The APF takes a little practice. Except when I'm NCS of our traffic
net, I run about 250 Hz DSP BW. I have found that the APF gets very
hard to tune with anything less than that and 300 Hz is even better.
Hi All,
There has been a fair amount of discussion here about which accessory for
the K3 trumps the other --a P3 or a 2nd RX. I don't have an answer, but I
do have an opinion.
I have the full K-Line here, but due to neighborhood restrictions, my
antennas are modest. I use an R8 and a
Found the receipt. Oct. 2008
73
de KB6G
Ron Midwin
r...@midwin.com
310-497-7727
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
On closer examination it was found that the BNC connector for the antenna was
lose (i.e., both pins were moving inside their soldered sockets).
Re-soldering these contacts seems to have resolved the problem.
Jose VA3PCJ
--
View this message in context:
My KPA500 has light from the LCD display leaking around the HV and Current
buttons
I'm considering putting a strip of foam weather stripping between the buttons
and the display to block it
What have others done to cure this?
Thank you
Announcing the arrival of a new K3 to this world. #8902 was officially
brought into this world after 3 nights of light labor in kit building.
Many thanks to Stephanie, Johanna, and Jashmin for accurately counting
all of those tiny nuts, bolts and washers packed in what seemed like a
hundred
Thanks to suggestions from Dick Dievendorff, the problem seems to be an
interaction between the XKPA100, and the software I was running, DXLab
Suite, in particular Commander. I had continuous interrogation turned
on. If the software was started before the station equipment, in
confused the
I have a KPA500, KAT500, K3, band decoder, and remote rig with aux ports all
connected together (and working) with vga splitter cables. I'd like to get a
panadatper. Anybody else have this much stuff working together? Any issues?
73, Walt
--
View this message in context:
I would believe so since the P3 is daisy chained into the Serial port not the
AUX port
From: W0CP w...@arrl.org
To: elecraft@mailman.qth.net
Sent: Saturday, March 14, 2015 1:53 PM
Subject: [Elecraft] Will it work with all these connections?
I have a KPA500, KAT500, K3, band
My KPA500 has light from the LCD display leaking around the HV and Current
buttons
I'm considering putting a strip of foam weather stripping between the buttons
and
the display to block it
I had never noticed it, so had to go check mine. Yes, it does the same thing.
What have others
Hi Walt,
Well close.. If by band decoder you mean the Elecraft KRC2, I do have
it but do not have any remote rig additions. However, I do have the XV144 and
XV432 plus the PR6. Lot of Y's.
If the Panadapter will be the P3 it is on serial output from the K3 not
the AUX
why does it need to be fixed because it sits at the perfect angle to look like
an LED shining
I have them about a foot below eye level and off to the right of center.
From: mcduf...@ag0n.net mcduf...@ag0n.net
To: elecraft elecraft@mailman.qth.net
Sent: Saturday, March 14, 2015 2:40
47 matches
Mail list logo