[Elecraft] Internal Speaker Problem

Good Afternoon, This is Mark Griffin KB3Z. I finally got my KDVR/Front panel issue fixed. So the front microphone connector now works plus I get line out on PSK31 and RTTY. But for some strange reason the internal speaker does not work. Not that I was really using it because I use a CLRspkr

Re: [Elecraft] [K1] X-Lock & K6XX mounting?

Doug, I don't know about X-Lock, but I can comment on the K6XX CW Tuning Indicator. Just cut the leads to the prescribed length (do not dress them any shorter), and then just let the board lay on the RF board in the right front corner. It will do no harm there, and if you ever have to move it

Re: [Elecraft] K2 Options

Jim, I tend to agree, though the K2 is still a very credible rig. The K3 replaced mine as my main station radio in early 2014. Used K3 or even the TS-590S would be a good choice. "it was designed before the turn of the century!" makes it sound like Marconi used it :-) 73, Phil W7OX On

Re: [Elecraft] K3S - Ordered Today!!

My K3S is s/n 10111. 73, Ian N8IK -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil Wheeler Sent: Sunday, September 6, 2015 12:03 To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3S - Ordered Today!! Given K3S serial numbers are five

Re: [Elecraft] K2 Options

I had both but ended up keeping the audio filter. I think it's a matter of personal taste, so if you have the opportunity to try a K2 with those options, it's worthwhile. 73, Vic, 4X6GP/K2VCO Rehovot, Israel http://www.qsl.net/k2vco/ On 7 Sep 2015 06:45, Dauer, Edward wrote: Still exploring

Re: [Elecraft] K3 ERR 12 V

Just finished up the jumper trick. Working great now! 73 Dwight NS9I On 9/6/2015 9:22 AM, Roger D Johnson wrote: It's pretty easy to jumper around the pins. 73, Roger On 9/6/2015 8:13 AM, Joe Subich, W4TV wrote: What is you serial number? Intermittent ERR 12V is one early warning sign of

Re: [Elecraft] Ordered today!

73 is also a palindrome in CW. Kevin. KD5ONS On 9/6/2015 7:53 PM, Dauer, Edward wrote: If that¹s the contest, I am going to wait a while to order mine. 73 in binary is 1001001, which is also a palindrome. Now that would be a cool S/N. Ted, KN1CBR Date: Sun, 6 Sep 2015 09:03:18 -0700

Re: [Elecraft] Elecraft K2 7615

I'm really sorry your K2-build didn't go well. If you really want to trash it, I'll pay the postage, send it to me. :-) There are a number of builders on this list, there's a compendium of them on the Elecraft web site [or was], and they range from building a kit from opening the boxes to

[Elecraft] Ordered today!

If that¹s the contest, I am going to wait a while to order mine. 73 in binary is 1001001, which is also a palindrome. Now that would be a cool S/N. Ted, KN1CBR >Date: Sun, 6 Sep 2015 09:03:18 -0700 >From: Phil Wheeler >To: elecraft@mailman.qth.net >Subject: Re: [Elecraft]

Re: [Elecraft] KX3 - DC Plug +

Pierre, The power jack on the early KX3s were not glued to the board, and the solder (or one of the lugs to the jack) would eventually break, especially if a right angle power plug was not used. I got a new jack from Elecraft and fixed mine, and then glued it to the board with a small bead

Re: [Elecraft] Ordered today!

1001001: That could be a very long wait, an eternal wait :-) 73, Phil W7OX On 9/6/15 7:53 PM, Dauer, Edward wrote: If that¹s the contest, I am going to wait a while to order mine. 73 in binary is 1001001, which is also a palindrome. Now that would be a cool S/N. Ted, KN1CBR Date: Sun,

Re: [Elecraft] K3 Utility Save Configeration freezes

way235 wrote > I am using version 1.15.8.18 with windows 7. The save configuration bar > goes to about 80 percent and then the program freezes and I have to go to > task manager to close the utility. > Configure crystal filters works, Edit CW memories works, Power on banner > and time and date

Re: [Elecraft] K3S - Ordered Today!!

I think Jeff's just having a little fun winding you up Jerry :-DCongratulations on your purchase. It's a great rig packed with features, and if you get lost there's plenty of help available here on this mail list. 73, Matt VK2RQ _ From: Jerry Moore

Re: [Elecraft] Internal Speaker Problem

You had it apart? Did you plug the speaker back in? Or maybe have the connector offset when you did? Grant NQ5T > On Sep 6, 2015, at 5:32 PM, pastor...@verizon.net wrote: > > Good Afternoon, > This is Mark Griffin KB3Z. I finally got my KDVR/Front panel issue fixed. So > the front

[Elecraft] KX3 - DC Plug +

Hi Folks Well after 3600+ QSOs with my KX3/SN190, I now have a couple of problems: 1- The DC plug is working intermittently.Think that I have to resolder it. Since I got the factory-built version, I would like to know what is the shortest way to (de)-assemble the rig to do the repair...? I

Re: [Elecraft] KX3 PBT problem

Al, That sounds like the switch to Weaver demodulation below 1.8 kHz is causing the 'hole' in your waterfall - that is used for SSB voice reception. Use DATA A (or AFSK A for RTTY) instead of SSB to avoid that condition. 73, Don W3FPR On 9/3/2015 10:55 AM, Al Duncan wrote: I have RX xFIL

[Elecraft] 2015 NJQRP Skeeter Hunt Results

A big and hearty "Thank You" to all who particpated in the 2015 NJQRP Skeeter Hunt last month. Wow, it was just a month ago? The results and soapbox have been published for your perusal. Scoreboard can be found at

Re: [Elecraft] K2 Options

I have built every K2 option there is. Definitely the KDSP2 is the way to go. If you are going CW only, the QRO options are not needed, unless you are severely antenna restricted. Leroy AB7CE K2 serial number 40 -Original

Re: [Elecraft] K2 Options

On Sun,9/6/2015 8:45 PM, Dauer, Edward wrote: Began looking into the K2. The build sounds interesting. I would do this ONLY if you really want to do the build. Otherwise, go with one of the many used K3s coming on the market, or if the cost is too much, with a TS590S. The K2 is pretty big

Re: [Elecraft] Internal Speaker Problem

On Sun,9/6/2015 3:32 PM, pastor...@verizon.net wrote: Any suggestions as to why this may have happened? If you have something plugged into either headphone jack (front or rear) it mutes the speaker by default. You can override this with a menu setting, and you can assign that function to one

Re: [Elecraft] Ordered today!

Could be worse ... anyone get 666 ?? 73, Dick, W1KSZ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil Wheeler Sent: Sunday, September 06, 2015 8:10 PM To: Dauer, Edward; elecraft@mailman.qth.net Subject: Re: [Elecraft] Ordered today!

Re: [Elecraft] KX3 - DC Plug +

Re: "2- The second pixel on the SWR display is lighted even without signal. Not a major problem .. just want to know what is going on ..." I will take a shot at that question, Pierre. If the "faulty" pixel is in the S-meter, it means that you have the rf gain turned down. Tap the AF/RF-SQL

Re: [Elecraft] K2 Options

I had both and use the DSP; a bit tricky to adjust though, but there is a user's guide to it somewhere (on the Elecraft website, I think). Once adjusted well the DSP is excellent. Phil W7OX On 9/6/15 8:45 PM, Dauer, Edward wrote: Still exploring options for a backup rig for the K3. (The

Re: [Elecraft] Elecraft K2 7615

Aaron, I would not toss it. I just got my K2 serial #5308 back from Don, W3FPR. I bought it used and had Don to put additional options in it as I have bad eyesight. It works great. I am very pleased with it. He did a fantastic job and will work with you to get it right. He will even build and

Re: [Elecraft] K2 Options

I've got to agree with Jim. I have both the K2 and K3. I enjoyed building my K2 as much as anything I've done in ham radio, and I still find ways to get in there and mess with it. It is a fine radio, BUT--the K3 is better in every respect IMHO. There are great bargains in used K3's coming on

Re: [Elecraft] K3S - Ordered Today!!

LOL, ok ;) Jer Sent from Mail for Windows 10 From: Matt Maguire Sent: Sunday, September 6, 2015 5:50 PM To: Jerry Moore;Jeff Cathrow;Elecraft Digest Subject: Re: [Elecraft] K3S - Ordered Today!! I think Jeff's just having a little fun winding you up Jerry :-D Congratulations on your

[Elecraft] Elecraft K2 7615

Hello Aaron, Just employ a builder to complete the project for you.  They charge you only a small fee.  If you are in the Asia Pacific region, you can send it to me to have a look. 73 Johnny VR2XMC 寄件人︰ Aaron Scott 收件人︰ elecraft@mailman.qth.net 傳送日期︰ 2015年09月7日

[Elecraft] K2 Options

Still exploring options for a backup rig for the K3. (The KX3 stays at the other QTH.) Began looking into the K2. The build sounds interesting. One choice that has to be made is between the KDSP2 DSP filter and the KAF2 audio filter and clock. Apparently it has to be one or the other -

Re: [Elecraft] [K1] X-Lock & K6XX mounting?

hi Doug For x-lock i found this: http://www.qsl.net/g4aon/pdfs/X-Lock_K1_v2.pdf but didn't modify my K1 yet. 73, paul hb9axl __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] [K1] X-Lock & K6XX mounting?

hi Doug For x-lock i found this: http://www.qsl.net/g4aon/pdfs/X-Lock_K1_v2.pdf but didn't modify my K1 yet. 73, paul hb9axl __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] K3: Any gain with a new synth?

Bill: I just finished installing the new boards in both my K3's. I did one radio complete and then did a quick test on 80m and 20m with both radios. I found the new boards quiets the receiver down somewhat and makes it easier to pull out the weaker signals. I have pretty quiet conditions at

Re: [Elecraft] K3S - Ordered Today!!

Are you looking for 007 or what? Perhaps 7373? What would a cool number be? Jerry Moore Saturday, September 05, 2015 8:03 PM YAY! I ordered my K3S today. I'm really hoping I get a cool serial number __

Re: [Elecraft] K3S - Ordered Today!!

Well, I knew I was a big gun when I got my first K3 - a pair of 45's... ;-) 73, geo - n4ua (s/n 4545) On Sun, Sep 6, 2015 at 9:20 AM, Phil Anderson wrote: > Are you looking for 007 or what? Perhaps 7373? > > What would a cool number be? > > Jerry Moore

Re: [Elecraft] K3S - Ordered Today!!

I have K3 serial 7. Shaken, not stirred. 73, Vic, 4X6GP/K2VCO Rehovot, Israel http://www.qsl.net/k2vco/ On 6 Sep 2015 16:20, Phil Anderson wrote: Are you looking for 007 or what? Perhaps 7373? What would a cool number be? Jerry Moore Saturday, September

Re: [Elecraft] K3S - Ordered Today!!

I’ll always be a little gun until my skills match or exceed the capabilities of my station Jer AE4PB, K3S SN: TBA From: George Dubovsky [mailto:n4ua...@gmail.com] Sent: Sunday, September 06, 2015 9:26 AM To: Phil Anderson Cc: Jerry Moore; Elecraft Reflector Subject: Re: [Elecraft] K3S -

Re: [Elecraft] K3 ERR 12 V

It's pretty easy to jumper around the pins. 73, Roger On 9/6/2015 8:13 AM, Joe Subich, W4TV wrote: What is you serial number? Intermittent ERR 12V is one early warning sign of the "burned 12V pins" on the KPAIO3 and KPA3 boards. If you have an early K3 that did not have the "gold pins" on

Re: [Elecraft] K3: Any gain with a new synth?

Thank you for all the answers - here and email. I appreciate the candidness. Unfortunately, for Elecraft, I have decided to keep my K3 as it is. In my instance, I don't see enough potential improvement to justify the expense and labor (considerable to get the rig to the bench and back). I

Re: [Elecraft] K3: Any gain with a new synth?

That’s kind of what I’ve been thinking too, Bill. With my often high noise level suburban location combined with modest wire and vertical antennas I think it would be overkill and not worth the investment. As it is I often joke that the K3 for me like driving a McLaren to the grocery store-way

Re: [Elecraft] K3S - Ordered Today!!

That's a good question, regardless I'm ecstatic. After getting my hands on on the K3S and seeing the P3 my only regrets are not having the cash to get it all on the first pass J. I guess my thoughts were something interesting on serial number, both 007 and 7373 are cool J . On another note I

Re: [Elecraft] K3S - Ordered Today!!

Jer, ae4pb. Cool. I purchased my batch of stuff in stages too. Got the K3 in Nov of 2014 and then added the P3 (with SVGA interface for flat screen) along with second RX (SUB RX) couple of months later. It's all working great. Oh.I added the AUX addition so that I could run diversity

Re: [Elecraft] K3 Note: "The KFL3A-200 is currently unavailable."

Explicit details no, but Wayne has posted a couple times about possibly bringing it back. I'll bet it's supplier issue with the crystals themselves or possibly the manufacturer doesn't want to spend time on a low volume product and longer. Does Elecraft have an alternate supplier? Who knows,

[Elecraft] K3 Note: "The KFL3A-200 is currently unavailable."

Anyone know the details? 73, Bill W4ZV -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Note-The-KFL3A-200-is-currently-unavailable-tp7607115.html Sent from the Elecraft mailing list archive at Nabble.com.

[Elecraft] K3 ERR 12 V

During the ongoing All Asia Contest, after a few hours of sleep, I started to call Cq on 20m using my Acom 1000+ K3 at 50 W. After about 20 minutes I noticed ERR 12Volt and the power went down to 5 W so I switched off the K3 and power supply. After some 15 minutes of thinking I restarted the

Re: [Elecraft] K3 ERR 12 V

What is you serial number? Intermittent ERR 12V is one early warning sign of the "burned 12V pins" on the KPAIO3 and KPA3 boards. If you have an early K3 that did not have the "gold pins" on P68B of the KPA3 and J68B of the KPAIO3, I would be making plans to get them changed. 73, ... Joe,

[Elecraft] (OT) tuning the Cushcraft R8

I'd like to chat off-list with anyone who has experience "tuning" the Cushcraft R-8 vertical. Thanks. ...robert -- Robert G Strickland, PhD ABPH - KE2WY rc...@verizon.net.usa Syracuse, New York, USA __ Elecraft mailing list Home:

Re: [Elecraft] K3S - Ordered Today!!

I didn't see it. The order form, much like the order webpage is overly cluttered for these older eyes LOL Jer -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jeff Cathrow Sent: Sunday, September 06, 2015 1:11 PM To: Elecraft Digest Subject:

[Elecraft] Elecraft K2 7615

I bought the Elecraft K2 # 7615. I'm just wondering if I could send the unit back and just cut my losses on it. I have it assembled except for the SSB Module. For the past couple of months I have been trying to align the unit. Every single step of the process has been a battle. I have received

Re: [Elecraft] Elecraft K2 7615

Heh Aaron I'm really sorry you've had a bad experience. I too was pushed to the limit constructing the K2, but I'm glad I persisted. Luckily, you are in the best place to get support. I know that others more experienced will be along to help you. Hang in there. 73 Gareth, M5KVK On Sunday,

[Elecraft] Elecraft K2 7615

Ok, I'll bite. Why can't you get Elecraft to look at it? Mark AI4BJ >> I'm at the point that if I can't get Elecraft to look at it, then I'm just >> going to dump it in the trash __ Elecraft mailing list Home:

Re: [Elecraft] Elecraft K2 7615

Perhaps ask someone to build it for you for a small fee? When you purchase a radio as a kit it's expected that you ENJOY the construction/assembly process. If that's not your thing then just find someone to build it for you. -Original Message- From: Elecraft

Re: [Elecraft] Elecraft K2 7615

Oh, and if you're going to dump it in the trash ship it to me and I'll see what I can do. I've never seen nor built a K2 but if it's trash to you I certainly can't hurt it. jer -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Aaron Scott Sent:

Re: [Elecraft] Elecraft K2 7615

Elecraft publishes a list of people who will build or finish a K2 kit for you. http://www.elecraft.com/k2_builders.htm wunder K6WRU CM87wj http://observer.wunderwood.org/ (my blog) On Sep 6, 2015, at 11:06 AM, Gareth - M5KVK wrote: > Heh Aaron > I'm really sorry you've had a

[Elecraft] Elecraft SSB Net Results

Band conditions were much improved today. And, as a consequence, everyone working the Worked All Asia contest were on the air and having good results, too. We had 20 check-ins from around the country today. Here were today's check-ins: N6JW John CA K3 936 NC0JW Jim CO KX3 1356 WB9JNZ Eric IL K3

Re: [Elecraft] K-3: attempted loading 5.35 with wrong K3 Utility in error

> But now K-3 will not turn on completely. At power on, transmit light > blinks continuously (red!) and message on screen MCU LD. But there is > no communication through the com port, although K-3 Utility shows > comport open. See the K3 Utility help file - it discusses recovery from a failed

Re: [Elecraft] K3: Any gain with a new synth?

George, Just to confirm -- you are referring to the Noise Reduction function that is evoked by pressing the "NR" button; correct? If so, why should it be ANY different at all from that of the K3, given the same firmware revision level, in which case I would assume the exact same algorithm is in

Re: [Elecraft] K3: Any gain with a new synth?

That’s interesting. The K3 and K3S use the same DSP algorithm (same firmware) to accomplish NR. In what way do you perceive it being different? Are the settings (AGC threshold, etc) the same on the all of the radios? Grant NQ5T > On Sep 6, 2015, at 11:28 AM, george fritkin via Elecraft >

Re: [Elecraft] K3S - Ordered Today!!

What? Didn't you check the little box on the order form for the K3SS#O (K3S Serial Number Option) ? It's only something like $50 or $75 as I recall. 73, Jeff, NH7RO Sent via pack mule telegraph

[Elecraft] Elecraft CW Net Announcement

Good Morning, Please join us this afternoon and evening. 14050 kHz at 2200z Sunday (3 PM PDT Sunday) 7045 kHz at 0100z Monday (6 PM PDT Sunday) 73, Kevin. KD5ONS - __ Elecraft mailing list Home:

[Elecraft] K3 mini

The K3 Mini only works witha K3. It does everything the K3 does when connected. So your buddy should read the K3 manual. He should also check out remotehamradio.com Bill N2WL __ Elecraft mailing list Home:

Re: [Elecraft] K3/0-Mini

Barry says: > My comments are based upon using the K3/IO-Mini via remote rig directly to my > remote rig controller at the target K3 (e.g. the 1258MK II system) and NOT > using remotehams.com service. I am not familiar with remotehams.com setup, > but presume that the same concepts apply. >

[Elecraft] KX3 no transmit audio

Hi All, For some reason on my KX3 using the MH3 mic, I can no longer get any audio on transmit. Vox operation still works to key the radio, but it is just an empty carrier. When I have the alc/comp meters up, I can see the audio levels rise and fall with my voice. TX power is set to 10W, not

Re: [Elecraft] K3: Any gain with a new synth?

I have my "old K3" on QTH.com, priced at what it would take to get it. Meanwhile it is still on my operating desk and if no one wants it, then it will stay right here, hooked up and ready to roll. Who knows I might try satellite again and a second K3 so I can run full duplex with my K3s works

Re: [Elecraft] K3S - Ordered Today!!

Given K3S serial numbers are five digits, I wonder what qualifies as "cool". Maybe 11011? Phil W7OX On 9/6/15 6:26 AM, George Dubovsky wrote: Well, I knew I was a big gun when I got my first K3 - a pair of 45's... ;-) 73, geo - n4ua (s/n 4545) On Sun, Sep 6, 2015 at 9:20 AM, Phil Anderson

Re: [Elecraft] K3: Any gain with a new synth?

I have 2K3s and the new K3S.  The noise reduction function much better on K3S 73dsGeorge, WGF On Sunday, September 6, 2015 8:35 AM, Jim Rogers wrote: I have my "old K3" on QTH.com, priced at what it would take to get it. Meanwhile it is still on my operating

[Elecraft] K-3: attempted loading 5.35 with wrong K3 Utility in error

Didn't realize that the K-3 utility I had was outdated. Started firmware download. Got message that MSU failed. The utility attempted to reload the firmware. Unsuccessful again. So I closed the utility, downloaded proper version. But now K-3 will not turn on completely. At power on, transmit

Re: [Elecraft] K-3: attempted loading 5.35 with wrong K3 Utility in error

K3 Utility Help, Troubleshooting, MCU Boot Loader has a step by step recovery procedure. 73 de Dick, K6KR -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Art via Elecraft Sent: Sunday, September 06, 2015 9:38 AM To: elecraft@mailman.qth.net

[Elecraft] K3 Utility Save Configeration freezes

I am using version 1.15.8.18 with windows 7. The save configuration bar goes to about 80 percent and then the program freezes and I have to go to task manager to close the utility. Configure crystal filters works, Edit CW memories works, Power on banner and time and date work. I just can't save