[Elecraft] Elecraft CW Net Announcement

Good Evening,   After a cold, wet week the sun is out for the weekend.  High of 60 today.  Too bad there are not more leafy trees up here because in the valleys they are reaching peak color.  I do have a few vine maple but the colder air is settling much lower down the mountain so they have

Re: [Elecraft] K1 Bezel

Jon, The best bet is Elecraft, p/n E100108 - Acrylic Display Bezel. Contact sales at Elecraft 831-763-4211 to order. If you want your own name and call (or anything else that you want) engraved on the bezel, contact Arkay Engraving (do it soon, Ken is retiring) http://www.arkayengravers.com/

[Elecraft] K1 Bezel

Good evening all, I picked up a nice K1 yesterday at NearFest. The bezel has the previous owner/builder's name and call engraved in the bezel. Does anyone have a nice un-engraved bezel that they'd like to sell? I figured I'd ask here before I try Elecraft. Thanks, Jon WS1K

Re: [Elecraft] Recent Thread on Powering Down K-3

You power off with the Pwr button K3/0 and it shuts down the remote radio. It turns On the remote with a short connection to a pin on the Accy 2 connector. Sent from my iPhone ...nr4c. bill > On Oct 14, 2017, at 7:24 AM, Richard C Bean wrote: > > > If one has to turn

Re: [Elecraft] KIO3B Audio I/O PCB Assembly

Interesting to read, Clay. I just this month got the P3 Panadaptor and had problems at their connections to the KIO3B. I thought it was fixed when they sent me a new cable for the P3, but now it is back on an intermittant basis and my connection to the computer USB has gone, too. I really do

[Elecraft] KRC2 does not communicate with CPU

I have 2 KRC2's, one is working correctly with my K3. The second one used to work, but now just blinks the LED slowly, about 1 sec. rate, when powered up.  If I switch the OP/DL switch to DL the LED turns off.  I have no comms over the serial port with my computer.  I'm using the same setup as

Re: [Elecraft] K3 after turning on doesn't receive or transmit

Yes! It's a "computer". Sent from my iPhone ...nr4c. bill > On Oct 13, 2017, at 4:00 PM, Dave Cole (NK7Z) wrote: > > Respectfully, is that really true? The K3 needs to be shutdown via the Power > switch due to some sort of shutdown procedure, (or internal timings issue), >

Re: [Elecraft] Recent Thread on Powering Down K3

That is what the RRC-1258 at the K3 does.  When it's all set up, turning on the K3/0 [or K3 or K3s] will turn on the remote radio.  When the K3/0 is turned off, the remote K3 shuts down completely. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 10/14/2017 5:54 AM, Don Wilhelm

Re: [Elecraft] 630 meter band approvals ...

Nothing received from UTC, but they have until Oct. 15th to reply to me after which implied approval can be assumed. Wed. I repaired my 43H by 122L inverted-L and yesterday got it re-installed with help from my prof. tower folks, so now it requires retuning from 495 to 475 KHz and installing

Re: [Elecraft] (k3) Key out redux

Pete, Connect one side of the relay coil to your +12 volt supply, and connect the other side to the KEYOUT jack. Put a diode with the cathode connected to the +12 volt side across the relay coil. The negative of your power supply has to connect to the shell of the KEYOUT connector. The

Re: [Elecraft] (k3) Key out redux

Here's a link to the basic discussion . See the wiring diagram about half way through the article. Cheers, David -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft

[Elecraft] (k3) Key out redux

Thanks, everyone who responded to my earlier query - I now understand that the circuit in the K3 is equivalent to the old bipolar transistor switches we used to use for serial port CW/PTT keying. So here's my problem - I have a small 12V DPDT relay that I want to use to switch the power to my

[Elecraft] Finding geographical coordinates

Very easy here: Lat & Long or you can use this: https://www.findlatitudeandlongitude.com/ Bill W2BLC* * __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] Recent Thread on Powering Down K3

Dick, The K3 (note no hyphen in Elecraft model designations) can be powered off via the PS0 command. To power it on, Pin 8 of the ACC connector can be pulled to ground. 73, Don W3FPR On 10/14/2017 7:24 AM, Richard C Bean wrote: If one has to turn the K-3 off only via the power switch,

Re: [Elecraft] 630 meter band approvals ...

Yep, got mine today too. Now where did I store that 4CX10,000.? Charlie k3ICH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] Recent Thread on Powering Down K-3

If one has to turn the K-3 off only via the power switch, how does the K-3 work when used with the K-3/0 remote head? I have just purchased that and its accessories (RemoteRig boxes, etc.) but I have not yet set it up. Thanks and 73, Dick, K1HC

Re: [Elecraft] K3 after turning on doesn't receive or transmit

I suspect that “bad things” can happen if the power drops DURING the process of saving. Then you might get partial or invalid information stored. This could be why most of the time it is harmless. Vic 4X6GP > On 14 Oct 2017, at 10:12, Clay Autery wrote: > > Just like any

[Elecraft] KIO3B Audio I/O PCB Assembly

Anyone have a slick way of securing the KIO3B Audio I/O PCB Assembly when installed so it doesn't wiggle up and down every time you make/break a connection. Drives me nuts and can't be good for longevity on the multi-pin connector. 73, -- __ Clay Autery, KY5G MONTAC

Re: [Elecraft] K3 after turning on doesn't receive or transmit

Just like any other computer with volatile memory  IF you don't tell the computer you are shutting down, it doesn't know and therefore doesn't have time to save the information to NON-volatile memory. __ Clay Autery, KY5G MONTAC Enterprises (318) 518-1389 On 10/13/2017

Re: [Elecraft] 630 meter band approvals ...

Me too approved for both bands!  Now to figure out how to get on them.  ;) __ Clay Autery, KY5G MONTAC Enterprises (318) 518-1389 On 10/13/2017 2:10 PM, Joe Subich, W4TV wrote: Looks like approvals are starting to come out for 630 m operation.  I filled out the

Re: [Elecraft] Key Out jack

K3 Schematics: http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf K3S Schematics: http://www.elecraft.com/manual/E740323%20K3s%20Schematic%20Files.pdf __ Clay Autery, KY5G MONTAC Enterprises (318) 518-1389 On 10/13/2017 8:33 AM, N4ZR wrote: I am trying to use the