[Elecraft] Looking for K3/0 mini or non-mini

For an OM in our remote group, I am looking for a used K3/0 (old) or K3/0 mini. If anyone has one available in either the U.S. or Europe, please contact me off list. 73, Mitch DJ0QN / K7DX -- Mitch Wolfson K7DX / DJ0QN 10285 Boca Cir, Naples, FL 34109 Skype: mitchwo USA: Home:+1-239-221-9600

Re: [Elecraft] K4 Exref?

I asked this same question some time ago. I don’t recall whether it was Eric or Wayne that replied, but the answer at the time was that it was standard and not an option. Grant NQ5T KX3 (8342)/KXPA100 > On Oct 15, 2019, at 10:06 PM, Jim Miller wrote: > > I see there’s a external reference

Re: [Elecraft] K4 Exref?

Standard. 73, Wayne N6KR elecraft.com > On Oct 15, 2019, at 7:06 PM, Jim Miller wrote: > > I see there’s a external reference knockout on the K4 back panel but is it a > option or is the feature part of the base K4? > > 73 > > Jim ab3cv >

[Elecraft] K4 Exref?

I see there’s a external reference knockout on the K4 back panel but is it a option or is the feature part of the base K4? 73 Jim ab3cv __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] K2 For Sale

K2 s/n 5035 KPA 100 Amplifier KNB2 Noise Blanker K160RX 160 meter module KAF2 Audio filter and Real-Time Clock KI02 RS-232 Interface and Aux I/O K60XV and Transverter Adapter KSB2 SSB Option $800 plus shipping Lloyd K8DIO k8dio (at) roadrunner.com -- Sent from:

Re: [Elecraft] K3 VFO-B knob replacement notes

A few years ago, when the VFO B knob on my K3 cracked, Elecraft sent me a free replacement. Recently, one of the smaller knobs split in two. It was entirely made of plastic. I ordered a replacement, which turned out to have a metal insert. Clearly, these should have had the insert in the

Re: [Elecraft] KX3 fuses

All, An additional point in mobile installations - do NOT connect the negative directly to the battery. Follow the negative battery lead to the point where that lead connects to the frame. Many modern vehicles have sensing devices in that path from the battery negative and the point where

Re: [Elecraft] KX3 fuses

I certainly agree with Don. As I try to keep a modular approach for my equipment, I use Powerpoles on everything. For portable equipment, I created short fused cables from ATC blade fuses (just got them from Walmart or an auto parts store) and some black 12-gauge wire with Powerpoles on both

Re: [Elecraft] KX3 fuses

Well ... yes, best to fuse the + conductor. However, be aware that inline fuse holders [and their fuses] are not zero ohm superconducting devices.  The best ones seem to be the automotive blade-type [Rig Runners use them] with a wide contact surface and wiping action on insertion and removal.

Re: [Elecraft] K3 VFO-B knob replacement notes

However you work it, I tried something and it worked/works perfectly with my K3 & K3s (which has the off-brand metal knobs). I took the felt washer and put the Teflon plumbers tape on it, I wrapped it so the felt is now unseen & the washer looks "white" from the tape. This allowed me to

[Elecraft] K4 knob sizes

I have the CNC weighted knobs with bearing dimple on the VFO A knob, non-dimple on the B knob. will these transfer to the K4? IOW, are they the same size knobs on the K4 as the K3? Cheers! Gary KA1J __ Elecraft mailing list Home:

Re: [Elecraft] KX3 fuses

Terry, The KX3 has internal protection, but a fused power lead (only necessary in the positive lead) provides additional protection. That is important IMHO when powered by an external battery - there is a lot of energy in a battery, and if the wire is pinched and shorts, it will spew molten

Re: [Elecraft] KPA500 no power out

As I have previously posted, my KPA500 (factory built, purchased new a few months ago) failed after a couple weeks of use in the same manner. I sent it to Elecraft, and they repaired it at no cost to me (of course) except the nearly $100 it cost me to ship it to them, insured. There were a

[Elecraft] KX3 fuses

I was looking at my power leads and realaized I had no fuses in the lines. The factory power lead as well had no fuses. I'm about to change that with inline fuses. I would appreciate any comments.. __ Elecraft mailing list Home:

Re: [Elecraft] KPA500 no power out

On Tue, Oct 15, 2019 at 7:04 AM w5zzt wrote: > > Well my T/R circuit just failed yesterday. Mine is a 2016 model that was a > kit. serial number 3032. > > It's out of warranty so waiting for Elecraft to call me so I can send it in > to be fixed. No smoke just quit and disconnected it before it

[Elecraft] SSB Filters For Sale

A matched pair of 2.7 kHZ K3/K3S SSB filters; $160 ($80 ea). Prefer not to break up. QSL: W5JV Doug W5JV K1, K2, K3S Visit https://www.qrz.com/db/W5JV for some great boat-anchor items. Looking for something special? Ask us. Wanted: Petersen Type PR-1 Crystal in FT-243 holder cut for

[Elecraft] Pigtail & Cable for sale

Pigtail from http://pignology.net and RS232 to electrify KX3 control cable. Manual available at Pignology.net $100 including shipping. PayPal requires an additional $5.00 unless you simply send money. contact off net if required at my email

Re: [Elecraft] K3 VFO-B knob replacement notes

Hello Geert, I guess the VFO-B knob for the K3S will fit, doesn't it? The K3S is still available. Most probably available with a different part number. Just verify if the diameter of the ax K3 vs K3s is the same. 73's, Evert PA2KW / 5T2KW -Oorspronkelijk bericht- Van:

Re: [Elecraft] KPA500 no power out

Tony, no s/n known but rev.D9 or earlier with SMD parts assmbled... BUT no A/B rev. as these are thru hole parts populated LPF/PA boards. Simply if your LPF/PA board is thru hole yellow caps populated then it is not rework kit for you (Elecraft parts kit: E850607) and if you have the SMD parts

Re: [Elecraft] KPA500 no power out

Dear Frank, it should help you. http://ok1rp.blogspot.com/2017/02/elecraft-kpa500-lpf-tr-switch-rework.html Petr - 73 - Petr, OK1RP "Apple & Elecraft freak" B:http://ok1rp.blogspot.com MeWe: https://bit.ly/2HGPoDx MeWe: https://bit.ly/2FmwvDt -- Sent from:

Re: [Elecraft] KPA500 no power out

Well my T/R circuit just failed yesterday. Mine is a 2016 model that was a kit. serial number 3032. It's out of warranty so waiting for Elecraft to call me so I can send it in to be fixed. No smoke just quit and disconnected it before it blew the finals of my radio. Anyone had this repair

Re: [Elecraft] K3 VFO-B knob replacement notes

Two possible replacements. Not exact appearance to original, but both are 1.25 inch diameter, and about 0.7 inch tall. Very close to original measurements. This one is plastic. Drawing available online. https://www.digikey.com/product-detail/en/davies-molding-llc/8125-B/1722-1087-ND/6566310