Good Evening,
It was a soggy, gray week. The hummingbirds returned after a three
week absence. They told me exactly where the feeder should be located.
Today the sky cleared for an hour. Long enough to see the moon. The
snout and fore-paws of the rabbit on the moon were showing. Then
On 3/19/2021 5:47 PM, Nate Bargmann wrote:
Home runs from each piece to the bus bar.
If mounting in a metal rack, bond each piece to the rack and then home runs
from each rack to the bus bar.
Commercial communication site practice is to have a "halo" -
large-diameter wire or bus bar - all
The difference in forward voltage drop between the 95SQ015 vs. the SR1503 under
transmit load current is only about 0.15 V. Probably not worth the trouble to
substitute the former.
Wayne
N6KR
elecraft.com
> On Mar 20, 2021, at 6:14 PM, Harlan Sherriff via Elecraft
> wrote:
>
>
FS: K2 s/n 7795. This is the basic model, 15W only, no additions, just the
base radio. Just back from Elecraft K2 Support for alignment and testing so
it works perfectly. Electronically and aesthetically a perfect 10. This is
a conversion from a Rev A kit to Rev B but brand new. New unbuilt kits
https://www.solidstateinc.com/product/95sq015/
Has 133 in stock
Sent from my iPhone
> On Mar 20, 2021, at 7:54 PM, Bruce Forsberg wrote:
>
> Just completed building a K2 kit. They had an SR1503 diode for D10 on the
> RF board.
>
> Bruce, WB6IZG
>
>> On Sat, Mar 20, 2021 at 4:43 PM Geert Jan
Just completed building a K2 kit. They had an SR1503 diode for D10 on the
RF board.
Bruce, WB6IZG
On Sat, Mar 20, 2021 at 4:43 PM Geert Jan de Groot wrote:
> The high-current low-drop diode 95SQ015, used in the K2 (it replaced
> D10, SB530, because of it's favorable voltage drop) seems to be
The high-current low-drop diode 95SQ015, used in the K2 (it replaced
D10, SB530, because of it's favorable voltage drop) seems to be out of
production and out of stock in the likes of Mouser, Digikey and
Farnell/Newark.
I hoped the component was just replaced by a SMD version but that
On 3/20/2021 8:57 AM, Wes wrote:
If Rick's comment is accurate, and I have no reason to think otherwise,
then what it states is in direct conflict with what one co-author (K9YC)
has preached for years, that each box should connect to the next and
there is only one connected to the ground
Having a bus that runs the length of an operating desk with all the
equipment connected to it by short straps is not that different from
bonding each piece of equipment to the ones next to it. But it allows
you to remove one unit without breaking the "chain."
This is contrasted to the "star"
Interesting. I don't have (and probably won't buy) the book, but here we have a
disconnect---no pun intended.
If Rick's comment is accurate, and I have no reason to think otherwise, then
what it states is in direct conflict with what one co-author (K9YC) has preached
for years, that each box
We will do our weekly crap shoot and Try for 3.815 as I never know the mood
or how the band is populated at that hour
Keep Smiling
Paul - KB9AVO
80 Meter Net Control
__
Elecraft mailing list
Home:
Dave, try doing the Calibrate Transmit Gain that is in the Utility under
Calibration. I had that exact problem in the 80 & 10 meter band. Tech at
Elecraft told me to do this. That fixed the problem. I had to do this several
times & found it worked better on a old dummy load than it did on one
Let me first say that I am new to using a panadapterHowever, it has
worked fine since I got it a month ago. But now it doesn't seem to reflect
what I am hearing on the K3S (which I got at the same time).
I am listening to an S9+ CW signal on 80m but do not see the signal on the
P3. I
Dave,
I have that exact problem with my KX2 on 10m. See my recent thread here:
https://www.mail-archive.com/elecraft@mailman.qth.net/msg247537.html
Elecraft support said that situation is indicative of a failure in the output
stage, and my KX2 is currently back at elecraft for repair. I sent
Hello all I wonder if anyone has come across this problem that I have with my
KX2. After initial turn on or after changing bands to 80M the tx power output is
2W if the power setting is 10W or above. If I keep talking into the mic (MH3)
and pressing and releasing the PTT then the power will
15 matches
Mail list logo