Boy, this is all news to me. As a career airline mechanic, since retired, I'm
unaware of any HF radio equipment on board that is capable of operating on the
ham bands. The only HF carried on our airplanes was Automatic Direction
Finding and that was receive only and emergency only. Some
It's been a few years since I've asked for help but I need some now. I'm
unable to get the K2 recognized by any computer program. So far the voltages
have checked close until J2. Pin 1 is showing 2.3v and should be 0, pin 3 is
showing 1v and should be 5v. J1 voltages are pretty close. The
Further info on my problem. The I/O is inop with either the original or the
KPA100 plugged in. I suspect the problem may be on the control board but that
gets into ICs and I have no idea what goes on in them.
Bob AA7EQ
It's been a few years since I've asked for help but I need some now.
, with the HW9, I didn't have an email list to
bail me out of my dumb mistakes. All things
considered, I'd rather do a K2.
Bob Baxter aa7eq
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
at http://groups.yahoo.com/group/Amateur-repairs/
Bob Baxter aa7eq
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
--- Paul E.McLaughlin [EMAIL PROTECTED] wrote:
I tried to unsubscribe last night but I forgot my
password.
In a couple of days Mailman will send you it's monthly
notice with your password on it.
Bob Baxter aa7eq
___
Elecraft mailing list
Post
. With good sunshine I
can operate all day and go home with a fully charged battery.
Bob Baxter aa7eq
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
Now that I've got the American Morse paddles out and dusted them off,
would anyone like to buy them for $45 delivered conus. Used very little
since I got the Palm paddles.
Bob Baxter aa7eq
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
that,
experimenting with feedline length seems like the next step.
To see how feed line length effects tuning see
http://www.qsl.net/w5dxp/notuner.htm (as mentioned in a previous
post) An antenna analyzer really helps but the 4SQRP club's
Tenna-dipper is a cheaper alternative, if its still available.
Bob
Trying to get Tbird to lose it's appetite for html.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
guys have always bailed me out before.
Bob Baxter aa7eq
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
and there seemed
to be no shortage of volunteers willing to drive several miles up in
the mountains and stay to the end. All you need is an active club.
Bob Baxter aa7eq
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
about something for Lightnings etc.
--
Bob Baxter AA7EQ
Walnut Ridge, Ar.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
them without being asked.
Bob Baxter AA7EQ
Walnut Ridge, Ar.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
The subject line says it all. If you have one that is just gathering
dust I would like to buy it. I already have a Vibroplex Vari-Speed.
--
Bob Baxter AA7EQ
Walnut Ridge, Ar.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
in front of a bank of Hammerlund Super-Pros in a weather
station in Greenland.
Bob Baxter AA7EQ
Walnut Ridge, Ar.
On 1/31/06, Ron D'Eau Claire [EMAIL PROTECTED] wrote:
. I find that it's more effective to add length to the pendulum
like the bug tamer does. I have a large alligator clip whose jaws
stick the tip
in and work it up and down 3 or 4 times. Works real fine, lasts a
long time.
Bob Baxter AA7EQ
Walnut Ridge, Ar.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
Oh no!! Mailman has me listed as a spammer again. I haven't spammed
anyone for weeks.
--
Bob Baxter AA7EQ
Walnut Ridge, Ar.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
. It was a combination
of the denoiser and boosting the higher frequencies with the audio
unit that caused it. I've been happy dancing until I'm plumb wore
out.
--
Bob Baxter AA7EQ
Walnut Ridge, Ar.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
help. I don't know how long this has been going
on as I haven't used ssb for a few years--I have a 50 pound Kenwood
that does ssb pretty well if I feel the need for it. I haven't done
the matched crystal mod and I'm wondering if that will help. Any
ideas will be appreciated.
--
Bob Baxter AA7EQ
Oops. Receive as far as I know. I've never transmitted with it. I
will try both mods. It's definitely bassy on lsb and tinny on usb.
Thanks Ron.
Bob Baxter AA7EQ
Walnut Ridge, Ar.
On 12/10/05, Ron D'Eau Claire [EMAIL PROTECTED] wrote:
Transmit, receive, or both?
If on receive
I've ordered the 2nd stage mod kit. I'm also going to do the matched
crystal mod on general principles. Thanks for the help, I may buy a
microphone for it some day. I added the SSB for digital modes a few
years ago but never checked SSB audio.
Bob Baxter AA7EQ
Walnut Ridge, Ar.
On 12/10/05
testing testing 12345 54321 How do you read? Over
--
Bob Baxter AA7EQ
Walnut Ridge, Ar.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
Thanks guys. The last time I tried to post to this list I got bounced
for being a spammer. Guess I'm being given a second chance.
Bob Baxter AA7EQ
On 10/26/05, Lambs, Dick Judy [EMAIL PROTECTED] wrote:
5 x 9
___
Elecraft mailing list
Post
It has 30M, auto tuner, paddles, and lithium AAs. $375 delivered to
your front door in the lower 48. It was built by me (I've built a K2,
K1, and other stuff) and works like a champ. I would consider a trade
for a reliable QRO rig of the same value.
--
Bob Baxter AA7EQ
Walnut Ridge, Ar
A Dremel with a cutting disk makes short work of it. The light works great.
Bob Baxter AA7EQ
Walnut Ridge, Ar.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
I have 2 Palm IIIc color handhelds and would like to trade one of them
for monochrome (non color) Palm. It comes with 8mb ram, hot-sync
cradle and charger. Model isn't important as long as it works.
--
Bob Baxter AA7EQ
Walnut Ridge, Ar.
___
Elecraft
A trade has been made. Thanks to those who replied for their interest
Bob Baxter AA7EQ
On 6/22/05, Bob Baxter [EMAIL PROTECTED] wrote:
I have 2 Palm IIIc color handhelds and would like to trade one of them
for monochrome (non color) Palm. It comes with 8mb ram, hot-sync
cradle and charger
I think I used to have a microphone but haven't seen it in years.
Bob Baxter AA7EQ
Walnut Ridge, Ar.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
565-1296
Bob Baxter AA7EQ
Walnut Ridge, Ar.
On 5/13/05, Paul Gates [EMAIL PROTECTED] wrote:
I need some assistance. I thought I had saved the email but cannot find it
concerning from Mouser the part that fits on the bnc connnector on back of
K1 and has 2 terminals
I also own an RF-1 and have been very pleased with it but found
Autek's customer service to be non-responsive and arrogant when they
did respond.
Bob Baxter AA7EQ
Walnut Ridge, Ar.
There's things I'd change about both units (particularly the customer
service at Autek. I asked
http://www.n0ss.net/
Scroll down near the bottom of the page.
Ken Kirkley wrote:
Do I remember correctly that there is/was a free use version of
Spectrogram for aligning the K2? If so, where can I download the program?
--
Internal Virus Database is out-of-date.
Checked by AVG Anti-Virus.
a USB to Serial adapter (Com 3).
Bob Baxter AA7EQ
Walnut Ridge, Ar.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
Gilbert J Cross wrote:
Wanting to try out the new KIO2 I found that my computer has only
USB ports. Is it possible to cobble up an adaptor to get from the DB9 to
the USB port?
A USB to serial converter works for me and I have the cheapest one I
could find.
Bob
.
As usual YMMV.
Bob Baxter AA7EQ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
are helically fletched and untrimmed. When they reach
the top of their trajectory they descend straight down (good idea to keep
your eye on it). Google will tell you all about floo floos.
Bob Baxter AA7EQ
Bisbee, Az.
___
Elecraft mailing list
Post
/3rds of the
way to the case he built.
Bob Baxter AA7EQ
Bisbee, Az.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net
checked your car? 95% of the nuts and bolts in my 88 Chevrolet,
made in Texas, were metric.
Bob Baxter AA7EQ
Bisbee, Az.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
Meteor instead because they were $400
cheaper.
Bob Baxter AA7EQ
Bisbee, Az.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
on the KX1 in the ARS Journal at
http://www.arsqrp.com/ars/pages/back_issues/2003_text/1103_text/N7CEE.html
He recommends a 42' wire with a 16' cp. Since I don't have a tuner in my
KX1 yet I tried it with my K1 and it tuned up nicely on all four bands.
Bob Baxter AA7EQ
Bisbee, Az
40 matches
Mail list logo