Below is what we will be posting to the Elecraft shipping status page tomorrow
morning.
We waited until this week to update the official KXPA100 status in order to make
sure we had solid delivery commitments from all of our suppliers. Barring any
major surprises, we should be on track to
Looks like its time to end this thread in the interest of improving list SNR.
Thread closed.
73,
Eric
List Modulator
elecraft.com
On 8/20/2013 6:24 PM, Mark Petiford wrote:
Re: What if all your ops. are portable, and there is no wall?
You could take a Pink Floyd album along with you...
End of thread.
Let's close this thread now in the interest of reducing list traffic overload.
Eric
elecraft.com
_..._
On Aug 19, 2013, at 2:06 PM, F5vjc foxfive@gmail.com wrote:
And some who append silly quotations to the end of their message . Who
really reads those canned quotes and
Folks, let's end the handie talkie thread. and please do not criticize the
rudely postings of others. Several posts in this thread have been inappropriate
and outside of the list guidelines.
Eric
List Moderator
elecraft.com
_..._
__
Typo. The second sentence should read:
And please do not rudely criticize the postings of others.
Eric
elecraft.com
_..._
On Aug 19, 2013, at 6:29 PM, Eric Swartz WA6HHQ - Elecraft e...@elecraft.com
wrote:
Folks, let's end the handie talkie thread. and please do not criticize the
rudely
Folks, Dennis correct. Its also list policy.
Please trim the copied text from previous postings when replying on a topic to
the minimum needed to retain context. Usually a few sentences from the most
recent email in the thread are sufficient.
Please also delete the list footer from prior posts
Folks - We are exceeding the single list posting topic limit for the subjects on
loops and attic antennas. Let's close the thread at this time in the interest of
keeping list noise level under control.
73,
Eric
Elecraft List Moderator
elecraft.com
On 8/14/2013 8:44 AM, Ignacy wrote:
I used
Folks - We are exceeding the single list posting topic limit for the subjects on
loops and attic antennas. Let's close the threads at this time in the interest
of keeping list noise level under control.
73,
Eric
Elecraft List Moderator
elecraft.com
Eric
elecraft.com
Jim,
What is your power supply voltage as reported by the K3 when transmitting? As
power supply voltage drops the K3 increases current in order to put out the
requested power. If the voltage is dropping too low this can result in the
hi-cur message.
Also, the threshold for the hi-cur
Gary,
Our support engineers have been trying to reach you with no luck. Could your
system be blocking them with a spam filter?
We never ignore received support emails.
David emailed you again today, did you receive it?
73,
Eric
elecraft.com
_..._
On Aug 9, 2013, at 12:07 PM, Gary Gregory
See elecraft.com/elist.html for alternative list viewing pages. (Both nabble
and mail-archive can view our posts sorted by subject etc.)
In the interest of keeping list volume and SNR under control, let's end this
thread at this time.
73,
Eric
List Manager
elecraft.com
_..._
On Jul 6,
We've beaten this to death and beyond ;-). End of thread.
In the future, please resist posting when threads get this long and repetitive.
73,
Eric
List modulator
elecraft.com
_..._
On Jul 6, 2013, at 11:48 PM, Don Wilhelm w3...@embarqmail.com wrote:
Remeber the report in QST about the
End of Thread. Please resist the urge to post on OT areas when the thread gets
this long.
Also, please -always- delete the majority of the copied thread text as I have
done here, and all of the prior list footers to reduce unnecessary email volume
for other readers.
73,
Eric
List moderator,
Hi Jim,
We have discontinued the Elecraft version of the HexKey due to significant
price increases from the manufacturer. I believe you can still purchase the
Bencher version directly from them.
73,
Eric
elecraft.com
_..._
On Jun 30, 2013, at 5:03 PM, k...@cox.net wrote:
Hi All,
I am
Hi Bill,
Its much more likely they had wide band TX phase noise that was causing your
problems. (Unless they were running K3s :-) There is not much on the receive
side that you can do to eliminate that.
Eric
elecraft.com
_..._
On Jun 27, 2013, at 3:37 AM, Bill Frantz fra...@pwpconsult.com
Thread killed.
Guys, please be more respectful of each other, even when disagreeing.
Eric
List Moderator
elecraft.com
_..._
On Jun 21, 2013, at 4:57 PM, Josh Fiden j...@voodoolab.com wrote:
Exactly! That's the right answer.
Please kill this thread!
73,
Josh W6XU
On 6/21/2013 4:35
Hi Jim,
Answers below.
Eric
elecraft.com
_..._
On Jun 18, 2013, at 6:23 PM, Jim Dunstan jduns...@tbaytel.net wrote:
At 02:55 PM 6/18/2013, Wayne Burdick wrote:
Many competing 100-W amps don't cover 160-6 meters, or don't make it to 100
W on 6 meters. Many have poor IMD performance on
Next week.
Eric
elecraft.com
On 6/19/2013 7:35 AM, Fred Smith wrote:
I know these coming soon but how soon? I thought they were near production
but maybe not.
__
Elecraft mailing list
Home:
Please also note that most amplifiers like the one referenced below are
not compliant with the FCC Part 97 rules (which require FCC
certification of all external amateur amplifiers, built or kit, that are
offered for commercial sale ) and are not legal to sell into the U.S.
Many also do not
Lets end this thread at this time in the interest of reducing list
volume overload. Its past the single topic max posting threshold.
73,
Eric
Elecraft List modulator
elecraft.com
__
Elecraft mailing list
Home:
We've just updated the news page at http://www.elecraft.com/news.htm
with the following information.
---
We have received FCC certification (and also completed CE for Europe)
and are putting on the finishing touches and performing our field test
on the KXPA100. We're now taking orders for
Thread closed.
This thread is drifting into inappropriate responses. Please keep it polite and
respectful as per list guidelines. This is a hobby, and all participants are
welcome, regardless of their particular interests and level of technical
involvement.
73,
Eric
List moderator, when
Scott - I mis-read your post and it was not inappropriate. Sorry about that.
Reading too fast this morning..
But let's let the thread rest in the interest of keeping list posting volume
under control.
73,
Eric
List modulator
elecraft.com
_..._
On Jun 15, 2013, at 7:49 AM, Eric Swartz
Gentlemen - Both of these posts are inappropriate and outside of the
list guidelines. Let's tone it down a bit.
Eric
List Moderator
elecraft.com
On 6/14/2013 6:13 AM, Tommy wrote:
Double BARF !
73,
Tom - W4BQF
-Original Message-
From: elecraft-boun...@mailman.qth.net
We're drifting way off-topic. Let's end this thread for now and take it
to direct email if needed.
73,
Eric
List moderotator
elecraft.com
On 6/11/2013 10:26 AM, Phil Kane wrote:
On 6/10/2013 10:28 PM, Richard Fjeld wrote:
Phil,
You said: Even into today, HF marine safety and press
This is normal and is due to the small low voltage transformer and
rectifiers that provide power to the front panel microprocessor. turning
off the rear switch will turn everything off, including this transformer.
Eric
elecraft.com
On 6/11/2013 10:13 AM, Stan AE7UT wrote:
I have a kit-built
This thread has been closed.
Eric
elecraft.com
On 6/11/2013 2:40 PM, Jim Lowman wrote:
Same goes for those of us who programmed IBM mainframes.
All caps don't bother me for that reason. However, I understand that
it does bother some people, so I avoid it.
What bothers me more is textspeak,
The person you talked to was David in our support group. I'll make sure he gets
a copy of your post!
73,
Eric
elecraft.com
_..._
On Jun 6, 2013, at 1:05 AM, Fred Smith m...@totalhighspeed.com wrote:
Yes they do Icom support in a way just kidding 8). I had a question about
using my
Let's let the TS-990 topic rest for now. End of thread.
73,
Eric
List Moderator from time to time..
elecraft.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Thanks guys - We can close this thread for now.
73,
Eric
elecraft.com
On 5/30/2013 11:44 AM, ab2tc wrote:
It wouldn't bother me either. I just took the plunge XP to Windows 7 with
success so far.
Knut - AB2TC
__
Elecraft mailing
yes.
Eric
elecraft.com
On 5/30/2013 4:49 PM, w2b...@aol.com wrote:
Will they both going to be available at the same time? 73 George/W2BPI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
We are close to releasing the PR6-10. (Same case as the PR-10.)
Assembled PCBs are in-house and we need to test them and release the
manual. I'll post here when its ready for taking orders.
Eric
elecraft.com
On 5/26/2013 3:46 AM, Greg Wilson wrote:
I hope Eric and Wayne are reading this
TX Gain CAL should be run when transmitting into a 50 ohm dummy load.
Also make sure your KAT3 ATU is bypassed.
73,
Eric
elecraft.com
On 5/23/2013 4:36 PM, peterc281 wrote:
I decided to run through the calibration of my K3 after it came back from the
VK9NT Dxpo. I find I can’t complete the
Our KUSB and KXUSB adapters use the FTDI chip set.
73,
Eric
elecraft.com
On 5/23/2013 2:39 PM, Peter Lambert wrote:
If you are using USB to serial gizmo get a genuine FTDI one (you can buy
them from digikey). I've had lots of strange issues with serial SW since
real serial ports disappeared.
We were showing an iPad running iSDR for the panadapter with the Griffin
iMic audio interface between the iPad and the KX3's IQ output.
73,
Eric
elecraft.com
On 5/22/2013 8:45 AM, Edward R Cole wrote:
Eric and all:
I recall seeing a KX3 at the Elecraft Booth running a spectrum display
with
somewhere. The
hardware would actually be fairly simple, upconverting the KX3 I/Q
to the
same IF as the K3...
Bruce
N1RX
Eric Swartz, WA6HHQ Elecraft eric at elecraft.com
Sun Dec 18 13:25:09 EST 2011
Previous message: [Elecraft] P3SVGA
Next message: [Elecraft] KX3 - Range of integration with P3 (initial
d...@elecraft.com also works.
Eric
elecraft.com
_..._
On May 20, 2013, at 2:28 PM, Ron D'Eau Claire r...@cobi.biz wrote:
Ozzie, at least one valid address is right in the header of any of his
messages to this list:
w3fpr (at) embarqmail.com
73, Ron AC7AC
-Original Message-
I'm not sure where this rumor was started. While we certainly would like to do
something like this, we have not announced that we are developing it. We do not
have an active project to do this at this time.
We have been absolutely maxed out in engineering on many other projects,
including the
Folks let's end this thread at this time. We are drifting further OT and as a
favor to other list members please do not use the list to argue pro-con on what
Dxpeditions, contesters etc. should be doing.
73,
Eric
Elecraft List Modulator..
elecraft.com
_..._
On May 20, 2013, at 8:24 PM, Joe
We will have the hats on the web order form by Wed of this week. (After we
recover from Dayton - Whew!)
Eric
elecraft.com
_..._
On May 18, 2013, at 3:17 AM, Fred Smith m...@mo-net.com wrote:
Wayne could I pre-order 3 left over hats from Dayton when you get back? If
so I would even prepay
The K3/0 via the RemoteRig boxes absolutely -can- power up and down the remote
K3. It uses a pin on the K3 AuxPort that acts the same as pressing the power
button on the K3.
Powering up the K3/0 powers up the remote K3. And powering off the K3/0 powers
off the remote K3. Also, if you lose the
on/off a remote
K3.
73,
~iain / N6ML
On Sun, May 19, 2013 at 1:32 PM, Eric Swartz WA6HHQ - Elecraft
e...@elecraft.com wrote:
The K3/0 via the RemoteRig boxes absolutely -can- power up and down the
remote K3. It uses a pin on the K3 AuxPort that acts the same as pressing
the power
Folks - Time to close this thread.
This topic has been beaten to death and is drifting afield.. Let's let it to
rest. :-)
I'm ready to get a good night's sleep once we get home tonight (after 12
midnight PDT, 3 AM EDT.. ) and traveling for over 13 hrs after a long 3 days.
It was great seeing
Let's also close this offshoot thread in the interest of getting list SNR back
to a reasonable level.
Eric
List moderator, when I'm alert and awake..
elecraft.com
_..._
On May 19, 2013, at 9:18 PM, Phil Hystad phys...@mac.com wrote:
Actually, both the Ken Kesey reference and the Jim Jones
On 15 May 2013, at 02:50, Eric Swartz - WA6HHQ, Elecraft
e...@elecraft.com wrote:
Yup! Come early. :-)
Eric
elecraft.com
On 5/14/2013 3:19 PM, Scott Manthe wrote:
I'd love an Elecraft hat, but missed out on them last year. I'm wondering
if Wayne and Eric will have them
Yup! Come early. :-)
Eric
elecraft.com
On 5/14/2013 3:19 PM, Scott Manthe wrote:
I'd love an Elecraft hat, but missed out on them last year. I'm
wondering if Wayne and Eric will have them this year?
73,
Scott, N9AA
__
Elecraft
Hats will be also be available for purchase on the website after Dayton.
We have a large shipment coming in .
I'm off to pack and catch an early plane tomorrow. See you all there.
73,
Eric
elecraft.com
On 5/14/2013 3:53 PM, Harlan wrote:
Maybe the bosses can make both hats and shirts
This is now available as a public beta, MCU V1.47 / DSP V1.20, ob the KX3
Software web page.
http://www.elecraft.com/KX3/KX3_software.htm
Eric
elecraft.com
_..._
On May 8, 2013, at 1:17 PM, Wayne Burdick n...@elecraft.com wrote:
We've enhanced the KX3 noise blanker, with 15 level settings
the web page saying 1200 to 1500 would not be correct? I would only run
the amp at 1000 anyway, but just making sure before I buy one.
Thanks
Gerald.
On May 2, 2013 2:28 PM, Eric Swartz - WA6HHQ, Elecraft e...@elecraft.com
wrote:
Its important to understand that KAT500 operation outside
Its important to understand that KAT500 operation outside of the
specified power limits is not covered by the warranty should something
get damaged. We set these specifications with some safety margin to
assure that the ATU will not become damaged in normal operation.
While it may work at
IMPORTANT - If you do this, make sure to protect the P3 IF input with
back to back diodes. Static electricity on the whip antenna can harm the
input pre-amp. (Ask me how I know..)
I made an adapter here with a male-female BNC terminator with the back
to back diodes internally instead of the
Folks, this thread has already been closed. Please take further
discussion off list inthe interest of keeping posting traffic under control.
Eric
List Noderator
elecraft.com
On 4/28/2013 7:53 PM, Jim Brown wrote:
This discussion is getting VERY far afield from the topic of
connectors used on
Yes.
Eric
elecraft.com
On 4/29/2013 9:56 AM, iain macdonnell - N6ML wrote:
On Mon, Apr 29, 2013 at 7:51 AM, Bill b...@w2blc.net wrote:
Will the mini be able to perform the same job the control head on a
Kenwood 480 does? Put the radio on a back shelf and only have a 2 deep
control panel to
We're hitting the posting limit on this thread. lets close it at this time.
73,
Eric
List Moderator
elecraft.com
_..._
On Apr 28, 2013, at 8:08 AM, Bill Frantz fra...@pwpconsult.com wrote:
In my emergency go kit I have adapters to convert the SMA-F on my FT-60 to:
UHF-F
BNC-F
N-F
Sure. The KXPA100 will work with any radio that provides PTT and RF.
Eric
elecraft.com
On 4/25/2013 9:35 AM, AD6XY wrote:
Looks very nice - Does it work with the K3/10?
--
View this message in context:
Folks - We're drifting far afield. Let's end this thread at this time in
the interest of maintaining list signal to noise ratio.
73,
Eric
elecraft.com
On 4/23/2013 9:47 PM, Joe Subich, W4TV wrote:
I would disagree on the size. I have a book Weyrhauser put out in
the early 1950s for
Ed - No problem. We all do that from time to time. I think the major
issue with 'no subject' emails is that users and many spam filters treat
them as spam and delete them.
73,
Eric
List Modulator
elecraft.com
On 4/24/2013 10:18 AM, Edward R Cole wrote:
I received some feedback regarding
Folks, This thread was closed this morning to limit list noise level.
73,
Eric
List Moderator
elecraft.com
_..._
On Apr 24, 2013, at 8:13 PM, Ron D'Eau Claire r...@cobi.biz wrote:
Keep in mind that the requirement is not onerous. A typical hi-fi speaker
is NOT needed since the KX3, like all
yes, let's re-close this thread.
73,
Eric
List Moderator
elecraft.com
_..._
On Apr 21, 2013, at 1:58 PM, Tom H Childers n...@n5ge.com wrote:
Come on, this thread was closed last week by the moderator. Please
take it some where else.
Maybe here?
Jim's statement below about a KPA500 200W limit on 30M is incorrect. The
KPA500 puts out full power on all bands when driven at its normal levels
by the K3 or any other rig. Power is controlled by the drive level from
the rig, not by the amp.
Of course in the U.S. it is the responsibility of
Thread closed.
Guys, in the future please limit threads of this type to 2-3 posts and then
take them off list to direct email. OT discussions of this type can quickly
overload other readers with unwanted email.
If large threads of this type continue we will modify the list guidelines to
Let's end this OT thread at this time in the interest of keeping list signal to
noise under control.
73,
Eric
List Manager
elecraft.com
_..._
On Apr 9, 2013, at 3:10 AM, k...@juno.com k...@juno.com wrote:
I use a change-out (every 3 years) automotive battery and the
Harbor Freight 42292
Try setting the K3's mic gain menu setting to 'low'.
Eric
elecraft.com
On 4/9/2013 9:49 AM, Jay wrote:
I just got a CM500 yesterday for testing and would say the MIC is
quite sensitive..only takes a MIC setting of 4-6 and its
fine...increasing MIC gain apparently does nothing but increase
I believe this is one of the Asian or Russian fishing buoys that
frequently beacons near 7.040. They have popped up there for years.
73,
Eric
elecraft.com
On 4/3/2013 10:00 AM, Dave KK7SS wrote:
For at least the last 5 hours, there has been a station sending the letter K
on 7,039.3 CW once
In the interest of keeping list volume under control and beter SNR, lets
end this thread at this time.
In the future, please resist the urge to reply if there have been more
than 10 postings on an off-topic like this in a short period. This one
way exceeded that limit.
73,
Eric
List
This should work fine. The P3 is designed to coexist between the K3 and
external s/w on the RS-232 connection in this situation.
73,
Eric
elecraft.com
On 3/20/2013 12:53 PM, Don Butler wrote:
I'm hoping to add a P3 to one of the two K3s that I currently run in SO2R
configuration. Both K3s
Let's end this thread now in the interest of keeping list volume under
control.
73,
Eric
List Moderator, from time to time..
elecraft.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
The correct email address to use for fastest customer service on
technical issues like the one below is k3supp...@elecraft.com . We have
a whole team watching that address.For spare or missing parts
requests, use pa...@elecraft.com
If you email sa...@elecraft.com, or any of our support
Let's end this thread at this time. It has been determined earlier in
the thread it is a scam.
73
Eric
List modulator
elecraft.com
On 3/13/2013 11:10 AM, Phil LaMarche wrote:
I've received over 6 scam requests in the past 2 weeks and none of them had
emails listed on QRZ. Watch the language
This thread has been closed.
Eric
List Moderator
elecraft.com
On 3/13/2013 12:37 PM, tnny...@yahoo.com wrote:
Earlier this morn, his IP Address was in London UK.
Go figure.
__
Elecraft mailing list
Home:
The SVGA hw has been stable since release.
73,
Eric
elecraft.com
On 3/11/2013 6:32 PM, Sam Morgan wrote:
I may have a chance to buy a P3 SVGA Board. It was bought shortly
after they were released, but never installed. I don't know if it has
a serial number or exactly when it was bought.
My
No, trimming is not required for the connector to make a good connection.
73,
Eric
elecraft.com
On 3/12/2013 11:54 AM, Tighe Kuykendall wrote:
I built my KPA500 a couple of weeks ago. I also had the long pins but
didn't find anything about trimming them when I searched. I just went
ahead
Hi Dick,
Which address did you write to at support and when were the emails sent? We try
to respond to --all- support emails. (Though it can take a day or more if we
are receiving a lot of emails and calls.) Sometimes there is a typo in the
support address used by the user which can also block
Clipperton is definitely ok to post about.
Especially, since they are using K3s.. ;-)
73,
Eric
elecraft.com
_..._
On Mar 5, 2013, at 8:41 AM, Tony Estep estept...@gmail.com wrote:
On Tue, Mar 5, 2013 at 1:18 AM, Dyarnes w7...@cox.net wrote:
... lots of folks are working the Clipperton
We changed to a better quality BNC jumper cable for the P3 to K3-IF
connection approximately Nov 1st of 2012. P3s shipped after that should
have the newer cable.
If you hare having problems with an earlier cable, contact our parts or
support guys (pa...@elecraft.com, k3supp...@elecraft.com)
Interesting, but let's end this OT thread at this time.
73,
Eric
Your friendly list moderator, really!
elecraft.com
On 2/26/2013 3:52 PM, Matthew Zilmer wrote:
Interesting aside...
I worked for an In-Flight Entertainment development firm, and our premier
product line was a series of Ku-band
Steve,
The speaker and headphone outputs are driven by different audio amplifiers. To
my knowledge we have never seen both amps fail simultaneously. We also test
both of these boards before putting them in each kit.
This sounds suspiciously like the front panel,or the DSP board, is not seated
This is -exactly- what we do in the DSP for the K3's VOX to eliminate
any cutting off of the first syllable. You can talk normally without
that 'Ahh' at the beginning of sentences to avoid loss of info ;-)
73,
Eric
elecraft.com
On 2/21/2013 8:07 AM, Wright, Robert wrote:
I used to have a
Hmm, I'm the twin who signs the checks..
Based on the frequent times I'm addressed as 'Wayne' and Wayne is
addressed as 'Eric' at shows, we're totally confused on the twin issue. ;-)
ID Hint - I have a little less hair..
Eric
elecraft.com
On 2/18/2013 6:37 PM, Jim Wiley wrote:
So, which
Let's wrap up the G5RV OT discussion by the end of today in the interest
of keeping list volume under control for others.
73,
Eric
List modulator
elecraft.com
__
Elecraft mailing list
Home:
Of course :-)
73,
Eric
elecraft.com
On 2/13/2013 10:42 PM, Ken Schillinger wrote:
Can we expect the 2 meter module to be of the all mode variety?
73 Ken
__
Elecraft mailing list
Home:
Hi Gary,
This is normal as the KPA500 is designed to attenuate signals the further you
go below the 160M band in order to protect the T/R switching diodes from BC
band overload.
73,
Eric WA6HHQ
elecraft.com
_..._
On Feb 10, 2013, at 5:28 PM, AG0N-3055 mcduf...@ag0n.net wrote:
The
That was not a correct price. He must have thought you were requesting
something else. The rubber keypad is certainly much, much lower in price.
Note that removal of the old keypad and installation of the new one
involves making sure all of the adhesive from the original keypad is
removed
Advance notice for our Elecraft list members -
We will finally be making the price increases this Friday that we
originally planned for last September. (We were so busy with the KX3 and
other products that we kept putting it off until now - to everyone's
benefit :-)
The web order form at
Let's end of the ESSB debate thread.
Eric
List Moderator
elecraft.com
_..._
On Jan 27, 2013, at 9:17 PM, Scott Manthe scott.man...@gmail.com wrote:
Wasted bandwidth, indeed. This is not the place to debate ESSB. It's a dead
horse that has been beaten from the pasture to the glue factory.
Shipping form stock. :-)
73,
Eric
elecraft.com
On 1/21/2013 1:52 PM, Jeffrey Otterson wrote:
I'm wondering about the latest KXBC3 shipping status. The shipping status
page on the web site has had pretty much the same information for the KXBC3
for a while -- is there any news?
Thanks,
Jeff
We have released builder's alert #1 for the KX3.
Some builders have reported the four 2-56 flat head screws used to
attach the battery holders in the KX3 do not seat smoothly against the
plastic holder. The heads protrude upward and may strike and short one
or more batteries to ground. This
KPA500 f/w 1.23 was released earlier this month. . Its strongly
recommended KPA500 users upgrade to 1.23 for best performance. For
release notes etc see: http://www.elecraft.com/KPA500/kpa500_software.htm
73,
--
Eric
www.elecraft.com
We have lots ready to ship at elecraft.com ;-)
73,
Eric
elecraft.com
On 1/17/2013 9:01 AM, Scott Dunlavey wrote:
Looking for a P3 for my K3... please contact me via my email
w2...@arrl.net thanks for your time... and DON'T TELL MY WIFE
scott
w2ntv
End of thread.
73,
Eric
Liste moderator
elecraft.com
On 1/17/2013 11:07 AM, amsct...@comcast.net wrote:
He/she probably didn't compose the email. It's more likely that whatever
compromised Julian's email is what composed and addressed the spam email.
And CCing all of the recipients
H Mike,
Only amp keying and RF from the KX3 (or any other rig) must be fed the
amp. No alc is needed with the Kx3 due to its low drive level.
The KPA500 will automatically and seamlessly band switch when the KX3
first transmits on a new band by using its internal frequency counter.
73,
Folks - do not try to moderate the list or tell people how they should
post. That only increases the noise level and is outside of the official
list guidelines.
It's also inappropriate to attack another list member or say they have
to go..
Also, delete most of the copied text in your
Lets let this thread end for now. We've beat the 17M intruder to death.. ;-)
73,
Eric
Elecraft List Modulator and Moderator
---
www.elecraft.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
No need to contact support. This is the way is has acted since the
beginning.
73,
Eric
---
www.elecraft.com
On 1/15/2013 2:05 PM, DL5OCD wrote:
OK, many thanks. So it seems more like a bug than a feature...i`ll forward
this to k3-support.
73
Michael
Or email k3supp...@elecraft.com
73,
Eric
---
www.elecraft.com
On 1/11/2013 10:09 AM, Guy Olinger K2AV wrote:
You need to call Elecraft Tech Support on this problem before you go
further. They don't live on the reflector.
__
Its not anywhere near the top and its unlikely we will do this. We are
swamped on other areas.
Eric
---
www.elecraft.com
On 1/9/2013 10:12 AM, David G4DMP wrote:
In a message on 17 August 2009, Wayne Burdick wrote
..
- We could display just about anything on the P3's LCD
..
- I'd
Hi Richard,
While we do test and align the PCB boards identically on the kit and
factory assembled KX3s, we do further testing on the assembled units to
insure that we built them perfectly.
Assembled KX3s are given an preliminary TX and RX test after assembly,
followed by a multi-hour burn
Folks - Let's end this thread at this time.
73,
Eric
List Moderator ---
www.elecraft.com
On 1/2/2013 9:20 AM, va3...@gmail.com wrote:
I dis-agree. I am looking for a portable rig with 100w. First.
I hope that eric/wayne stays the course
a 'kosher ham'
Robert
-Original Message-
We have caught up with the backlog and we are now shipping KAT500s
within 2-5 business days after order receipt.
If you have had a KAT500 on backlog for some time and have not been
contacted by us to confirm the order, please contact sa...@elecraft.com
or call us at 831-763-4211. We have a
As stated before, we will keep it as a single list. Let's end the thread for
now.
73,
Eric
Moderator
www.elecraft.com
_..._
On Dec 28, 2012, at 3:44 PM, Bill K9YEQ k9...@live.com wrote:
Fred,
Likewise. I have so much Elecraft stuff I don't want to miss anything
important to me. I don't
801 - 900 of 2674 matches
Mail list logo
