Dunno why
but is the P3 figure that is drifting, not the radio.
Stay there and you will see the figure going left and at last stabilize,
but the signal (audio and frequency) and the radio will remain exactly
there.
Happen only one time with a switch on from cold, after will never
happen.
A bi
Hello Scott,
i am a Norcal & Elecraft collector, i have some materials collected
during the years.
In advance i can send you an image of a quick guide for KC1.
Unfortunately i found only a german guide and nothing in english.
Hope can help.
73's de Graziano IW2NOY
Il 04/03/2021 07:11 Scott R
Hello,
someone out there still have the kit for CE Tune Led modification for
the Elecraft K2 (or K1) ?
Or any information where is possible to find it ?
Thanks a lot, Graziano IW2NOY / W2NOY
__
Elecraft mailing list
Home: http://mailm
Hello,
i ordered a Colibrì Nano USB SDR.
and i am thinkg to connect the Colibrì antenna through the RX ANT OT of
the K3s tu use the colibrì and his software like a panadapter for the
K3s.
The colibrì can't accept "IF OUT", so i will use RX ANT OUT from XV3B to
give antenna signal to the Colibr
Hello,
i ordered a Colibrì Nano
(https://eesdr.com/en/products-en/receivers-en/colibrinano-en)
and i am thinkg to connect the Colibrì antenna through the RX ANT OT of
the K3s tu use the colibrì and his software like a panadapter for the
K3s.
The colibrì can't accept "IF OUT", so i will use RX
Hello,
in the past (2017) i adapted KCOMM for the K3s, maybe i will have the
opportunity to update KCOMM again for the K4 but... at this moment a K4
is missing in my shack :-(
I dont' know if Carlo Bianconi will give me the opportunity to test the
K4.
Thanks, 73's de IW2NOY
[Link to the pag
Hello,
in the past (2017) i adapted KCOMM for the K3s, maybe i will have the
opportunity to update KCOMM again for the K4 but... at this moment a K4
is missing in my shack :-(
I dont' know if Carlo Bianconi will give me the opportunity to test the
K4.
Thanks, 73's de IW2NOY
[Link to the pag
Hello,
Eleracft site : https://elecraft.com is down, almost in Europe.
Do you know it ?
Besta regards, Graziano IW2NOY / W2NOY
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Hello Terry,
thanks for sharing your thoughts, i agree in many points.
My Elecraft experience begun a K2 i bought used, in perfect condition
and full optionals.
I am still in love with that K2 and is still my favourite radio from
Elecraft, because for me...
The K2 is the perfect incarnation of
Hello,
i send some of my actual macros used with via K-pod on my K3s&P3.
Maybe could be useful for somebody...
(Keep attention to the last command "#FNXn", this call the functiion on
P3 button number "n", where i store my SPAN preferences)
[For example FNX1 is 5 khz, FNX3 is 10 Khz, FNX4 is
Hello,
if you would like to try a build experience of a Norcal 40a, this
british group sell the kit (licensed and permitted by Wayne):
https://www.ebay.it/itm/NorCal40A-DIY-Amateur-Ham-Radio-QRP-CW-Morse-Code-Transceiver-inc-PCB/293146499035?hash=item4440e497db:g:PIkAAOSwFGNcVyKK
See you on t
https://www.amazon.it/Adattatore-GANA-Convertitore-Supporto-Proiettore/dp/B01N2LZDP8/ref=asc_df_B01N2LZDP8/?tag=googshopit-21&linkCode=df0&hvadid=279880902455&hvpos=1o5&hvnetw=g&hvrand=11453284618796757896&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1008463&hvtargid=aud-544468258
amp;sr=8-1-fkmrnull-spons&psc=1
Best regards, Graziano Roccon IW2NOY / W2NOY
Il 21/05/2019 06:26 Alan ha scritto:
For less than $10 you can buy a little WiFi adapter that plugs into a
USB port. For example:
https://www.amazon.com/TP-Link-TL-WN725N-wireless-network-Adapter/dp/B008IFXQFU
amp;sr=8-1-fkmrnull-spons&psc=1
Best regards, Graziano Roccon IW2NOY / W2NOY
Il 21/05/2019 06:26 Alan ha scritto:
For less than $10 you can buy a little WiFi adapter that plugs into a
USB port. For example:
https://www.amazon.com/TP-Link-TL-WN725N-wireless-network-Adapter/dp/B008IFXQFU
MAESTRI !
Maestri is the plural for MAESTRO (singular).
I agree with you.
They do it again (to those japanese) !!! :-)
Ciao, Graziano IW2NOY
Il 17/05/2019 12:01 eric norris via Elecraft ha scritto:
I told the XYL tonight I was not going to be seduced by the SDR and
the glass cockpit of the
Hello Eric,
i will be in Friedrichshafen like every years, whit my friends IW2JWD
and obviously with our Elecraft themed t-shirt for 2019.
We are always dressed Elecraft from the hat ;-)
Don't know if you remember us, but we meet every year and we do photo
togheter.
The shirt this year is beau
Hello Eric,
i will be in Friedrichshafen like every years, whit my friends IW2JWD
and obviously with our Elecraft themed t-shirt for 2019.
We are always dressed Elecraft from the hat ;-)
Don't know if you remember us, but we meet every year and we do photo
togheter.
The shirt this year is beau
One of the nicest and funny message i ever read from an OM. ;-)
Thanks Bob.
Graziano IW2NOY
Il 06/05/2019 03:37 Bob McGraw K4TAX ha scritto:
That's the reason I purchased my K3S, P3, KPA500 and KAT500 all within
the past 2 years. At 77 years young, I figure it will be my last ham
radio stati
Yes, this is the place...
Shoot the question...
73 de IW2NOY
Inviato da BlueMail
Il giorno 13 mar 2019 11:51, alle ore 11:51, Henning Hess
ha scritto:
>Hallo, OMs
>
>How can I publish my questions at the right place?
>
>73 de Henning (DJ7HH)
>
>
>
>---
Ciao Philippe,
the CAT speed in the P3 must be 9600, Expert can't go faster, so, CAT
settings are Kenwood-9600.
On teh P3 use the rs232 port DB9, for PC and SPE.
Here is a link to a page on my site where a working connection is
explained.
Explanation is in italian, but schemas are available a
Hello,
why use CocoaModem at any cost, when FL-Digi is more complete and runs
fine on any Mac OS ?
73's de IW2NOY Graziano
PS
If looking also for a good logging program, MacloggerDX (payment) is
probably the best, for free there is RUMLog that is a great alternative
(very nice also)
Il
Hello,
i am looking for a Elecraft KBPF3A for my K3s.
If anyone want to sell it or know someone that want to sell it, please
let me know.
I would prefer in Italy or Europe, USA become too expensive for customs
and shipment costs.
Thanks a lot, Graziano IW2NOY
_
the 3000.
I hope could be interesting and that can help and... happen :-)
Thanks a lot, Graziano Roccon IW2NOY
PS
Why not... a more intuitive digital mode name in the menu are welcome
:-)
l 2019-01-12 05:38 Mike Lichtman via Elecraft ha scritto:
Wayne,
I would like to see an improved
Hey Norm,
are you kidding ?
I operate every Elecraft i own and the K1 is the center of my QRP
station.
Look at the attached pic ;-)
73's de IW2NOY Graziano
PS
My K2 is doing a piit-stop in this period with Don W3FPR
reccomendations, but soon it will go back on the air.
PS2
Yes, also w
Hello Alan,
thanks for your page on the K2-Twins.
I saw them a long time ago and i was impressed with the solution.
After a short time i begun to search for a KAT100 in EC2 and i bought
it.
Just the last weekend i decided to do the transformation and my K2-100
has become a K2qrp + KAT100-KPA100
Hello,
if i am not wrong, now only the SST-40 is missing to my collection, all
other RTX are present.
If anyone here have a lonely SST-40 and want make me happy to complete
my collection, please let me know and we will find an arrangement.
I hope to find the time to take a picture of all the
Hello,
Sorry for disturb but... What are difference between the releases?
Thanks, best regards, Graziano IW2NOY
Inviato da BlueMail
Il giorno 31 ago 2018 15:55, alle ore 15:55, Don Wilhelm
ha scritto:
>Petr,
>
>The latest KAT1 firmware is 1.3 and can be purchased from Elecraft as
>FWKA
Hi,
Serial communications is thinked for two buddies with crossed tx and rx., not
for three.
You have too many tx on the same cable.
Remove the tx from the db15 of expert you don't need it. For the expert is
enough READ (rx) the frequency that set the CAT coming from the PC (TX).
Remove the
28 matches
Mail list logo