120 or 240 volts supply?
On Feb 4, 2012, at 2:27 PM, david park wrote:
> I have recently assembled KPA500 serial number 641. When testing into a
> dummy load I find that I get a large variation in the DC power input when
> driving for 500W CW when I go from band to band. My worst band is 21MH
The red cable on the foot switch is for keying an amplifier and plugs into the
amps PTT or relay. This allows the foot switch to key the amp ahead of the K3
on transmit. Keeps you from talking into a dead amp.
On Feb 4, 2012, at 1:21 AM, N6SC wrote:
> I have looked on the headset on the ear p
Is the pre-amp in the same state for both receivers?
From: Al Dynarski
To: elecraft@mailman.qth.net
Sent: Fri, February 3, 2012 12:05:12 PM
Subject: [Elecraft] K3 - Volume loss through filter???
I recently installed the sub-receiver in my K3 and when comparing
From: James Meade
To: elecraft@mailman.qth.net
Sent: Tue, January 24, 2012 9:41:37 AM
Subject: [Elecraft] Boom & Mike for K3
Sorry if this has been addressed before. I'm hoping to spend more time in
my shack and I'd like some opinions or advice on a go
Love this:
"And all you guys can say is you don't like the color of the buttons.
Unbelievable!"
I'm with you Fred. I wish Elecraft made cars. They would read our minds, last
for 20 years and get 300 mpg!
On Jan 21, 2012, at 4:03 PM, Fredric Serota wrote:
> I don't usually say much on these li
No wobbly control knobs on my K3. And no complaints on knob quality here.
From: "ta...@comcast.net"
To: elecraft@mailman.qth.net
Sent: Wed, January 18, 2012 9:02:24 PM
Subject: [Elecraft] Build quality of K3 regarding control knobs and switches?
I was wonderin
nses, I checked all the tips and appreciate the combined
expertise this list always offers up.
Jack - WE5ST
From: Monty Shultes
To: Jack Berry
Sent: Mon, January 16, 2012 5:49:24 AM
Subject: Re: [Elecraft] Dead Sub Rcvr
Jack,
Check the antenna connection - a s
Could use some more troubleshooting help. I'm hoping to find a cable left
disconnected but doubt it. Any tips on where to look greatly appreciated!
I added a few mods to my K3 last Friday & just getting around to running
through
all the features - shake down cruse. I find the sub receiver, whic
quot;Dave, W8OV" wrote:
> I had a similar problem years ago with other gear. It all went away
> when I replaced a connector feeding the coax through a wall.
>
> --Dave, W8OV
>
> On 1/14/2012 9:15 PM, Jack Berry wrote:
>> Anyone have a similar experience?
>>
No box, no squelch.
On Jan 14, 2012, at 9:38 PM, "KENT TRIMBLE, K9ZTV" wrote:
> Or Squelch is on?
>
> Kent
>
> On 1/14/2012 9:15 PM, Jack Berry wrote:
>>
>> Anyone have a similar experience?
>>
>> Only occasionally, I notice that when I
Anyone have a similar experience?
Only occasionally, I notice that when I end a transmission my K3 receive seems
almost muted. It recovers to normal sensitivity very quickly. I so far see no
pattern to the effect that might suggest a cause.
Thanks,
Jack - WE5ST
__
Anyone have a source for Sal-Met? I can't find it on the web.
From: David Windisch
To: elecraft@mailman.qth.net
Sent: Tue, January 10, 2012 6:23:16 AM
Subject: Re: [Elecraft] OT - sound cards
Could you carefully solder a wire to the shell of a USB plug to use
I had a similar problem with K3 and SteppIR SDA-100 controller. Experimenting
with the order may solve the problem, it's worth a try.
I found that the how I added the devices, the order apparently made a
difference. Try a fresh start the computer on, next turn on the radio and
finally the SteppI
Exactly what I needed to know. I do plan to add the P3.
Thanks!
Jack - WE5ST
From: Matt Zilmer
To: Jack Berry
Cc: elecraft@mailman.qth.net
Sent: Fri, December 23, 2011 11:15:39 AM
Subject: Re: [Elecraft] Impact of this mod: K3 I.F. Output Buffer
Can someone explain the real world value of making this modification? This mod
is listed on the Elecraft website with this description (new production
incorporates this mod):
This modification increases the signal level at the I.F. output by more than 10
dB. It requires changing one
easily-acce
Is there a way to search across a range of mail list archives (a years worth
for
example)? I am trying to find comments on HRD and other loggers by Elecraft
subscribers.
73,
Jack - WE5ST
__
Elecraft mailing list
Home: http://mailman.qt
So Matt, does this mean that you are a "Universal Serial ghost-Buster"? (-:
Message: 34
Date: Sat, 26 Nov 2011 20:00:20 -0800
From: Matt Zilmer
Subject: Re: [Elecraft] Ghost in my shack
To: "Jim Farmer"
Cc: elecraft@mailman.qth.net
Message-ID: <35d3d7lpin7sqb8braofj51hvddt3so...@4ax.com>
Content-
Thanks - I didn't read far enough! Obviously!
From: Don Wilhelm
To: Jack Berry
Cc: elecraft@mailman.qth.net
Sent: Sat, November 26, 2011 4:06:57 PM
Subject: Re: [Elecraft] Mic problem
What type of Heil Proset is it?
If it is either the Heil Proset Ic o
I have a Pro-Set mic that came with the purchase of a used K3, s/n #3012 for
reference. The mic seems to be nearly dead and I wanted to make sure that I am
not doing something wrong before sending it to Heil for testing and repair.
Even with the gain full up and the mic right next to my mouth
Clipped pin 7 wire and all is well. Both DX Lab's radio controller module and
the logging module are listening to the K3.
Thanks!
From: "Joe Subich, W4TV"
To: Jack Berry ; Elecraft Reflector
Sent: Fri, November 25, 2011 4:04:16 PM
Subject
That did it! I had the TECH MD menu turned off and wasn't finding AUTOINF.
Thanks for the help to everyone who responded!
Jack - WE5ST
From: mike_k2mk
To: jlberry
Sent: Fri, November 25, 2011 3:38:03 PM
Subject: Re: SDA-100 setup with Elecraft K3
Hi Jack
hanks!
From: "Joe Subich, W4TV"
To: Jack Berry ; Elecraft Reflector
Sent: Fri, November 25, 2011 3:33:09 PM
Subject: Re: [Elecraft] K3/SteppIR setup
Elecraft uses a modified Kenwood protocol.
Have you enabled AI mode in the K3 and is a logging program running?
What cable a
Should the Orion or Kenwood mode be selected when using the K3 with SteppIR's
SDA-100 controller? Can't get it to work with either mode, just thought I would
check with the list.
Thanks!
Jack - WE5ST
__
Elecraft mailing list
Home: http:
anel.
From: Dick Dievendorff
To: Jack Berry ; elecraft@mailman.qth.net
Sent: Sun, November 20, 2011 5:27:45 PM
Subject: RE: [Elecraft] Fw: K-3 ERR TXF issue
The Owner's manual description of ERR TXF says that it means invalid crystal
filter bandwidth,
The crystal filter selected for
Forgot mention additional problem; after the reset, the power will only dial up
to 12W, not the 100+ seen before.
- Forwarded Message
From: Jack Berry
To: elecraft@mailman.qth.net
Sent: Sun, November 20, 2011 5:06:55 PM
Subject: K-3 ERR TXF issue
Just had the radio for a few days
Just had the radio for a few days, it was factory assembled and is almost new
but I am the second owner. It worked fine for a few days then I starting seeing
this error message (ERR TXF) when using the ATU and now get it everytime I try
to transmit.
I checked the FIL settings for the 3 positio
101 - 126 of 126 matches
Mail list logo
