Joe,
On the back of the KPA 500 you will find a fuse plug. You will switch this
between voltages using different fusses. Be careful to use the correct
fusses for the specific voltage. You can find the directions in the manual.
Irwin KD3TB
On Mon, Jun 5, 2023 at 7:03 AM Josep via Elecraft
wrote
to turn the KPA500 off/on using the remote software too?
Thanks, Irwin KD3TB
--
Irwin KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Found the programs and user manuals
On Sat, Mar 6, 2021 at 2:06 PM Irwin KD3TB wrote:
> In addition to the KPA500 & KAT500 Utilities, are there any remote
> programs that can control the amp and tuner remotely either through the USB
> port or an Internet connection?
>
> T
In addition to the KPA500 & KAT500 Utilities, are there any remote programs
that can control the amp and tuner remotely either through the USB port or
an Internet connection?
Thanks, Irwin KD3TB
__
Elecraft mailing list
Home:
Andy,
I kept the KAT500 in auto tune mode & I think I solved the problem...1) a
loose plug in the back of the KAT500 & 2) probably snow or frozen
participation on the antenna connection. Not sure what finally solved it,
but all seems to be well During the contest so far.
Tnx , Irw
stay in
By-Pass Mode.
This recently started and not sure what changed? A setting in the KAT500
Config Mode?
Thanks,
--
--
Irwin KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth
that is a S-20 (Receive) on the K3S meter, the P3
and SVGA only show the signal as a S3.
I am sure there is a way to get them to match in the menu settings?
Thanks, Irwin KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net
effect on the
function of the spot, what other settings to I need to look at?
Thanks, Irwin - KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
commands. - Or we just stay with VOX on when contesting.
Food for thought and what are others experience with the K3S and N1MM+/MMTTY
in RTTY contesting?
Thanks, Irwin - KD3TB
__
Elecraft mailing list
Home: http
Asking Price is $1,300.00 + Shipping and Insurance -or Best Offer.
Cont USA Only.
PayPal (if you use PayPal Purchase there is a 3% charge)
Non-Smoking Environment used as a second radio, lightly used. Mint
condition.
Irwin Darack - KD3TB
unds) or Check. Will ship after
check clears my bank.
If interested, please contact me off list.
Irwin - KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth
- KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
.
Irwin, KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
.
Irwin, KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
With the K3 in Split mode and Sub turned on, on 20 Meters I can hear the
Main and sub band in separate headset speakers, but cannot on 15 Meters
Is there a Config/Menu function that has to be set by band?
Thanks,
Irwin - KD3TB
is working fine.
Thanks, Irwin
-Original Message-
From: Dick Dievendorff [mailto:d...@elecraft.com]
Sent: Sunday, September 28, 2014 9:34 AM
To: 'KD3TB'
Subject: RE: [Elecraft] KAT500 Firmware Problem
High SWR in ATU bypass and unable to find a match to a close-to-resonant
antenna
From: KD3TB [mailto:idar...@gmail.com]
Sent: Thursday, September 25, 2014 6:07 PM
To: 'Elecraft Reflector'
Subject: KAT500 Firmware Problem
I had a problem when I installed the latest version of KAT500 Software
(1.67) and not sure what happened?
I had been operating for a few hours
Has Elecraft started to ship the new KXPA100's. We normally hear comments
on the reflector from those who have received the first ones. It's been
very silent?
I placed my order within a few hours of the announcement for orders and have
not heard anything.
Thanks, Irwin - KD3TB
was really impressed with the KPA500
performance.
Irwin - KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Config/Change CW/SSB/Digital
Function Key Definitions - Change SSB Function Key Definitions.
This is a great addition to the KX3 for both Dx'ing and Contesting. Our
thanks to the Elecraft Team.
Regards, Irwin KD3TB
--
-Original Message-
From
the Ham Radio the gremlins that reside in everyone's
shack had their fun and stopped playing with me
I'm glad I'm not a Triskaidekaphobic!
Irwin - KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
adjusting the compression.
Thanks and regards for a warm and joyous holidays.
Irwin - KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
I think I have figured this out. I switch from SSB to using DATA Mode for
PSK31 and RTTY. This turns the compression off when transmitting but does
not change the Mic Compression.
Thanks, Irwin KD3TB
From: KD3TB [mailto:idar...@gmail.com]
Sent: Thursday, December 23, 2010 2:14 PM
.
Thanks, Irwin KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
, Irwin - KD3TB
On Sep 28, 2010, at 12:20 PM, KD3TB idar...@gmail.com wrote:
I am trying to find and resolve the source of speaker/headset noise I am
getting with my K3. The noise sounds like a continuous fan noise in the
background. I think the noise is showing up in the Monitor circuitry ? Any
Buffer Kit Mod
for the P3 was done.
Any suggestions on setting(s) that I may be missing would be appreciated.
Thank you, Irwin KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
I have found that one program (MixW - a general logging and digital program)
requires me to set PTT-KEY to an RTS-DTR setting. I have not been able to
find a work around.
Irwin
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On
had used my Icom 756pro.
Once again, this is not scientific and just my opinion.
Irwin KD3TB
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Emilse Peraza
Sent: Sunday, February 14, 2010 8:03 PM
To: elecraft
28 matches
Mail list logo