Yep. That’s exactly what I mean ...:-)
Cheers
Mark Forsyth
http://jandmf.com
> On 13 Jun 2020, at 11:11 pm, "l...@ka7ftp.com" wrote:
>
> By "up to date" I assume you mean firmware?
>
>
> -Original Message-
> From: elecraft-boun...
you.
Cheers
Mark Forsyth
http://jandmf.com
VK3KW
> On 12 Jun 2020, at 11:36 pm, Grant Youngman wrote:
>
> Elecraft Tech Support seems (understandably) a bit slow to respond at this
> point. This is a repeat of a question I asked a few days ago. Maybe
> someone else will
Probably not but the XG50 is. It’s purpose built for the job.
Cheers
Mark Forsyth
VK3ZMF
> On 20 Mar 2020, at 2:35 pm, Eddy Avila wrote:
>
> Greetings hams, is the Elecraft XG1 signal generate stable enough to use to
> perform a temperature compensation process on a KX3?
>
orm that's more square than sine.
Cheers,
Mark F...
VK3ZMF / VK3KW
KX3 with the lot # 1675
KXPA100 # 530
PX3 # 233
> -Original Message-
> From: Bob McGraw K4TAX
> Sent: Friday, March 08, 2019 12:35 PM
> To: Mark Forsyth
> Subject: Re: [Elecraft] KPA-500 with Portable G
If you're thinking of using a generator at the cheaper end of the scale make
sure that its output is pure sine wave and NOT modified sine wave.
Cheers,
Mark F...
VK3ZMF / VK3KW
KX3 with the lot # 1675
KXPA100 # 530
PX3 # 233
> -Original Message-
> From: elecraft-boun...@mailman.qth.
Hi there,
Have you tried opening up the radio and reseating the ribbon cable that runs
between the two halves ?
Cheers,
Mark F...
VK3ZMF / VK3KW
KX3 with the lot # 1675
KXPA100 # 530
PX3 # 233
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
>
> setup i am curious as i have the same mic.
>
>
>
> Sent on the new Sprint Network from my Samsung Galaxy S®4.
>
>
> Original message
> From: Mark Forsyth
> Date:12/27/2014 1:26 AM (GMT-06:00)
> To: 'Carl Jón Denbow' ,elecraft@mailman.qth.
G'day Carl,
If you get aggressive with TX EQ you can make the Heil iC element sound
pretty good. If you can get someone who knows your voice to listen while you
make adjustments you should be able to come up with settings that suit your
voice.
I started out with the settings outlined on the Heil
Hi folks,
Is there an easy way to import a CSV file of frequencies in to the K3 memory
editor.
I'm looking to avoid a lenghty typo-thon entering a swag of VK3 repeaters so
that I can upload them to my KX3.
Cheers,
Mark F...
VK3ZMF / VK3KW
KX3 with the lot # 1675
KXPA100 # 530
PX3 # 233
_
> OK and thanks a lot. It's work and I already used it. But I'm looking for
not
> setting down the power to 5 W !
> 73
> Luc
>
> Le 09/04/2014 11:21, Mark Forsyth a écrit :
> > I have exactly the same setup except that I use an SGC237. Set tune
> > po
I have exactly the same setup except that I use an SGC237. Set tune power to
5W and use the tune button on the radio. Works a treat for me.
Cheers,
Mark F...
VK3ZMF / VK3KW
> -Original Message-
> From: elecraft-boun...@mailman.qth.net [mailto:elecraft-
> boun...@mailman.qth.net] On Behalf
I'll be around for a while on 15, 20 and 40.
It'd be good to work other Elecrafters around the place and to give my KX3 a
proper workout...:-)
Cheers,
VK3ZMF
>
> This weekend the JMFD will be running in VK.
>
> I expect many portable and base stations will be running on HF. (10, 15,
20,
> 4
>
> Since the K3 is not an SDR (the way of the future) and the KX3 is, IS
> THERE A K4 in the future?
>
> Again, a desktop 100 watt self contained SDR like the KX3 but in a K3
> type form factor?
>
> Just food for thought, anyone, ANYONE?
Hmmm. Thinking can be a dangerous thing. It can lead
Hi All,
I the doco that was packaged with my KXFL3 is the Installation Manual Errata
Rev A2-2 July 5 2012. I can't find the doc on the Elecraft web site,
however.
I short, it states :-
Page 1, Introduction, second paragraph, replace it with the following:
If you KXFL3 was supplied with either
14 matches
Mail list logo